Database Info

How to install Epic 2.0 by Darkonion.

This guide was written by Darkonion. I have just updated it to work for the newest release. Please give all credit to him.
NOTE: Updated September 12th, 2010. Added additional steps to the process. Reread to reapply the Epic Unleashed 2.0!
Please READ each direction CAREFULLY and BEFORE executing each step. I can not stress how many mistakes are made because someone did not READ the directions carefully. So... yeah, once again, READ THE DIRECTIONS CAREFULLY!
How to Apply EpicUnleashed 2.0
Credits: The ROM was created by Matt4542. Tutorial was written by me with some simple directions from Matt. You'll need to be rooted in order to run the Droid 2 Bootstrapper.
The fine print: Matt4542 and/or I (DarkOnion) can not be held responsible if you mess up. If you mess up, you mess up. That's why I wrote the .sbf recovery tutorial. Matt has also written one. More simple, but requires Linux.
Here we go.
1. Download Koush Bootstrap here.
http://koush.tandtgaming.com//motoro...2Bootstrap.apk
2. Download Unleashed 2.0!
http://matt.kimete.com/screenies/Unleashed2.0-D2.zip
3. Move both files to the base of the SD Card. Best way to do this is to plug your phone into your computer and move it like that. Make sure you phone is in USB mass storage mode. To change it, pull down the notification blind, choose USB connection, and choose USB Mass storage. Now copy and paste the two files to the new removable drive that showed up in your My Computer. The Epic-Unleashed11Deodexed.zip needs to be at the base of the SD card, and not in any folders. After moving all the files over to the phone, change the connection type back to Charge Only. Notfication blind -> USB Connection -> Charge only.
4. Install Koush Droid 2 Bootstrapper. Using an app installer, Astro File Manager, or equivalent, navigate to your SD card. The folder in Astro File Manager will be called sdcard. Choose Droid2Bootstrap.apk and install it. Follow the directions.
5. Now that it is installed, open Droid 2 Bootstrapper located in your applications section menu. It'll probably ask you for Super User access, say yes.
6. Press Bootstrap Recovery. It'll probably ask you for Super User access, say yes.
7. Next, we want to back your system file up by making a system image. In the Droid2 Bootstrapper, which you are already in, choose Reboot Recovery. Your phone should restart and load up into the custom recovery.You should see some green text with various options, and a little lower than the middle of the screen, it says ClockworkMod Recovery.
Notes for navigating through the system. You need to use the keyboard to navigate. "Enter" will select. "Del" will cancel/go back. and the arrows are movement.
8. Using your slide out keyboard, scroll down to backup and restore and press the enter key. It should take you to another window. Choose Backup. Let it runs it's course. After it is all said and done. If it does not bring you back to the main menu after this backup press the power button.
10. Using your keyboard buttons, choose mount and storage. And then choose mount /system. After that, press del to go back to the main menu.
11. Using your keyboard buttons, choose install zip from sdcard.
12. You need to make sure signature verification is off. Choose toggle signature verification and make sure it is off. At the bottom, under ClockworkMod Recovery, it'll say whether or not signature verification is enabled or disabled. You want it to say that it is disabled.
13. Then choose install zip from sdcard. Choose Unleashed2.0-D2.zip. It'll ask to confirm. Scroll down to Yes, and press enter. You'll see some commands going and eventually say it is complete.
14. Now navigate back to the main menu by pressing "Del" on the keyboard. And restart your phone by choosing reboot system now. It'll reboot and that's it! You've installed Unleashed 2.0!
Note: Your first boot will take a little while, up to 10 minutes. PLEASE BE PATIENT.
If you need to undo this thing, boot back up into bootloader using Droid 2 Bootstrapper -> Reboot Recovery -> Back Up and Restore (after the reboot) -> Restore.
If you like this tutorial or any other tutorial, please feel free to show your gratitude by sending me a few bucks my way. I am a poor college student always trying to make ends meet. It's just more than writing a tutorial. Troubleshooting, helping others when they get lost, constant updating and rewording to make the process more simple. All donations are greatly appreciated, no matter the amount. $1 USD is good for two taco's at Jack in the Box! Paypal: [email protected]
And please don't forget about Matt. Send some love his way, too. It takes time create this stuff, not to mention troubleshoot, fix, and update. Make sure you send some love his direction. He needs money for a domain name. Paypal him at: [email protected]
If anyone comes across and problems with instructions, please let me know. I am going to try to keep this thread updated and easy to use.
= = =
How to Root Droid 2
http://forum.xda-developers.com/show...&postcount=164
How to SBF Recovery Droid 2
http://forum.xda-developers.com/showthread.php?t=770224

thanks for this
the link to koush bootstrap is messed up btw
And there's no step 9

Here you go!
http://koush.tandtgaming.com//motorola/droid2/Droid2Bootstrap.apk

Uh... It said it installed and stuff so I rebooted, but it been on the Moto logo for more than 20 minutes now. Is something wrong or should I keep waiting?

kjik said:
Uh... It said it installed and stuff so I rebooted, but it been on the Moto logo for more than 20 minutes now. Is something wrong or should I keep waiting?
Click to expand...
Click to collapse
Pull battery and reboot. Rebootstrap and boot to recovery. You most likely forgot to mount system before flashing.

If for any reason I needed to go back to stock do I just do a recovery?

Yeah. Just boot back up in recovery, choose back up and restore, then backup, and choose a back up. In order to restore to a back up, you would have previously had made a back up.

darkonion said:
Yeah. Just boot back up in recovery, choose back up and restore, then backup, and choose a back up. In order to restore to a back up, you would have previously had made a back up.
Click to expand...
Click to collapse
Thanks! Just wanted to make sure, im all backed up and ready to go. But now I can't decide Epic or Tranquility? Mmmm

Just wondering why wiping isnt suggested...yet/

Coderedpl said:
Just wondering why wiping isnt suggested...yet/
Click to expand...
Click to collapse
No need to

Can someone post a mirror to this rom release, I've been trying to flash 2.5 and its not workin at all... wanna try to flash 2.0 then upgrade.. thnx in advance
Sent from my DROID2 using Tapatalk

[ROM] Fission Vanilla 1.1

Vanilla FroYo FRF91
For your Droid2, DroidX & Droid2 WE
Brought to You by Team DeFuse - AngDroid, Matt4542 & Drod2169
Splitting Blur from your Moto Droid.​
Twitter:
@AngDroid
@Matt4542
@Drod2169
Web:
www.teamdefuse.com
IRC:
http://webchat.freenode.net/
Channel #fissionrom
Thanks:
Thanks to all the developers before me who shared their knowledge for me to get where I am now.
Thanks to Koush for Bootstrap recovery.
Thanks to cvpcs for the 8mp AOSP Cam package in DX build.
Thanks to FreeWell for the overlcoking kernel and WalCS for all the overclock testing on D2.
Thank you to all in the IRC chat ROM for all the help.
Whois Team DeFuse:
AngDroid - Project Manager & Developer
Matt4542 - Developer
Drod2169 - Developer
Redflea - Forum & IRC Tech Support
WalCS - In house overclock nut
Darkonion - Guide Creator
Breif History:
This ROM came to be by being bored and not sure what else can be modified with the software Moto so lovely gave us on our devices. I stumbled on the Droid2 SDK and gave it a look to see what was inside. To my surpise it was a clean ROM. No signs of Blur. I thought to see if it would boot on device and it did. The resolution was horrible and the device was so slow. I told Matt and we began to get the system up and running. In no time we had a more stable system. AOSP packages were created for our app folder and here we are now. Along the way Drod2169 asked if I needed some help porting it over to the DX so he joined up to help us create the DroidX version.
About ROM:
First Vanilla ROM for Droid2, DroidX & Droid2 WE!
First ROM for Droid2, DroidX % Droid2 WE that can be overlocked!
This is not an AOSP ROM but all stock packages are built from source. It is a complete set of vanilla Android applications. All Blur has been removed so it is the closest you will get to a true AOSP clean ROM for the Droid2/X/WE/Pro right now. This is not a themed ROM to make it look like AOSP ROM.
The purpose of this ROM was to remove all Blur and have a real Android experience. Please do not ask to add anything to ROM. Everything that is missing can be found in the Add On folder that was created when you installed ROM or can be downloaded from market.
The installed applications are all of your basic Android apps. Gmail, Voice Search, Car Home, YouTube and some other apps are missing since there are more updated versions on the market.
ROM has root, deodexed and zip alligned.
All downloads and support will be provided HERE.
It is hard to support so many different forums so that will be our new home base for now.
Thanks!

hold hold hold

Instructions to Apply Fission 1.1 Final
Please READ each direction CAREFULLY and BEFORE executing each step. I can not stress how many mistakes are made because someone did not READ the directions carefully. So... yeah, once again, READ THE DIRECTIONS CAREFULLY!
How to apply Fission!!
Credits: The ROM was created by AngDroid and Matt4542 and some other peeps. Tutorial was written by me. You'll need to be rooted in order to run the Droid 2 Bootstrapper.
Information on how to root the Droid X and Droid 2 can be found here:
http://forum.xda-developers.com/showthread.php?t=782556
The fine print: Matt4542, AngDroid and/or I (DarkOnion) can not be held responsible if you mess up. If you mess up, you mess up. That's why I wrote the .sbf recovery tutorial. Matt has also written one. More simple, but requires Linux.
Here we go.
1. Download Koush Bootstrap here (for Droid 2).
http://koush.tandtgaming.com//motorola/droid2/Droid2Bootstrap.apk
Link for Droid X coming soon!
2. Download Fission!
Link in previous post!
3. Move both files to the base of the SD Card. Best way to do this is to plug your phone into your computer and move it like that. Make sure you phone is in USB mass storage mode. To change it, pull down the notification blind, choose USB connection, and choose USB Mass storage. Now copy and paste the two files to the new removable drive that showed up in your My Computer. The Epic-Unleashed11Deodexed.zip needs to be at the base of the SD card, and not in any folders. After moving all the files over to the phone, change the connection type back to Charge Only. Notfication blind -> USB Connection -> Charge only.
4. Install Koush Droid 2 Bootstrapper. Using an app installer, Astro File Manager, or equivalent, navigate to your SD card. The folder in Astro File Manager will be called sdcard. Choose Droid2Bootstrap.apk and install it. Follow the directions.
5. Now that it is installed, open Droid 2 Bootstrapper located in your applications section menu. It'll probably ask you for Super User access, say yes.
6. Press Bootstrap Recovery. It'll probably ask you for Super User access, say yes.
7. Next, we want to back your system file up by making a system image. In the Droid2 Bootstrapper, which you are already in, choose Reboot Recovery. Your phone should restart and load up into the custom recovery. You should see some green text with various options, and a little lower than the middle of the screen, it says ClockworkMod Recovery. We are going to call this the main menu.
Notes for navigating through the system. You need to use the keyboard to navigate. "Enter" will select. "Del" will cancel/go back. and the arrows are movement. You can also use the Volume Up/Down to navigate, the power button to cancel or go back a menu, and the photo trigger as okay.
8. Using your slide out keyboard or the volume control buttons, scroll down and choose backup and restore. It should take you to another menu. Choose Backup. Let it runs it's course. After it is all said and done, you will now have a back-up. If it does not bring you back to the main menu after this backup press the power button.
10. On the main menu choose mount and storage. And then choose mount /system. The option will become unmount /system after choosing it. After that, go back to the main menu.
11. Next, at the main menu, you'll need to wipe cache and then wipe data. First, scroll down to wipe cache partition and choose it. It'll take you to another menu confirming. Choose the yes option. It'll wipe. Go back to the main menu again, and do the same with wipe data/factory reset. Confirm by choosing yes.
12. Now you need to mount data. Go to mount and storage and choose the second option which is mount /data. The option will become unmount /data. Make sure that both /system and /data are mounted.
13. Next, go back to the main menu and choose install zip from sdcard.
13. Then choose install zip from sdcard. Choose (TheVersionOfFissionYouWant).zip. It'll ask to confirm. Scroll down to Yes, and press enter. You'll see some commands going and eventually say it is complete.
15. Next, at the main menu, you'll need to wipe cache and then wipe data AGAIN. Scroll down to wipe cache partition and choose it. It'll take you to another menu confirming. Choose the yes option. It'll wipe. Go back to the main menu again, and do the same with wipe data/factory reset. Confirm by choosing yes.
14. Now navigate back to the main menu. And restart your phone by choosing reboot system now. It'll reboot.
Note: Your first boot will take a little while, up to 10 minutes. PLEASE BE PATIENT.
15. After the reboot is complete, you need to do a factory reset inside of Android. Press the menu button in the bottom left of your phone (image of the 4 squares), choose settings, then privacy, then choose factory data reset. It'll give you a warning and ask you to confirm. Go ahead and confirm. The phone should factory reset itself and then reboot.
16. After reboot, you need to enter your Android information again. Just follow the onscreen user interface until completion like when you did when you first got your phone.
If you need to undo this thing, boot back up into bootloader using Droid 2 Bootstrapper -> Reboot Recovery -> Back Up and Restore (after the reboot) -> Restore, and choose the restore file you want to restore to. The files are named by the date you
If you like this tutorial or any other tutorial, please feel free to show your gratitude by sending me a few bucks my way. I am a poor college student always trying to make ends meet. It's just more than writing a tutorial. Troubleshooting, helping others when they get lost, constant updating and rewording to make the process more simple. All donations are greatly appreciated, no matter the amount. $1 USD is good for two taco's at Jack in the Box! Paypal: [email protected]
If anyone comes across and problems with instructions, please let me know. I am going to try to keep this thread updated and easy to use.

Thanks for all your hard work on this rom, guys.
It's a billion times better than stock!
Donation coming your way the second I get paid next week.

After following the instructions exactly, I don't have root.
Any ideas why?
EDIT: I took the question to the forum linked above ("All downloads and support will be provided HERE.")

eleventy said:
After following the instructions exactly, I don't have root.
Any ideas why?
Click to expand...
Click to collapse
This doesn't appear to have root (even though the readme says it does). I rooted again, and everything seems to work ok.

It does you just need to download superuser from the market and wallah~. This rom is impressive. Appreciate it and looking forward to updates

i lost root =[
installed superuser.apk from sd card, but when opening apps that require root it says its not able to obtain root access. Normally superuser would pop up a message and i would allow it. In this case it wasn't happening. I had to re-reoot, then was able to use bootstrap to reeboot in recovery. Flashing back to my old rom and wait til further notice. Besides that its a GREAT rom and love it.

new ROMs have been uploaded that include superuser app in system/app so it comes with rom.
When/if an updated superuser app and you isntall it please dont come here asking for help cause you have to superuser apps in the draw if that does happen. It was left out for a reason. I never lost root during the building stages of ROM and not sure what is going on so I just threw superuser back into the sytem/app folder.

I followed every step exactly and I did not lose root. Thank you guys for all your hard work. The new bootup screen is a nice added touch also!
Swyped from my Droid 2 using the XDA app

I've been reading that any rom for droid 2 will brick my r2d2...does this include fission?
Sent from my DROID2 using XDA App

Yes
Sent from my DROID2 using XDA App

Works beautifully, but there's definitely something up with this root business. Had to reroot and was fine.
Sent from my DROID2 using XDA App

No problems here. Great ROM. Maintained root.

Boot Animations
Anyone else having trouble installing the D2 Boot Animation? Is there a trick to it?

Anyone have trouble installing the d2 gallery?
Sent from my DROID2 using Tapatalk

Any luck w/ the contact ringtones yet? As of Test5 they still refuse to work on my phone

I am having The same issues. Everything else works great but gallery was missing, so I installed d2 gallery, then after install it was missing as well.. tried to install the dx, same issue. Then tried to install the android stock one and same issue no gallery.
Everything else works freaking great! Hats off to the devs..

This being a blur-less ROM and all, what kind of dependancies would I have to add back in to get some of the blur back in here?
I really dig the messaging, gallery, camera, and keyboard.
PART2: Now since this is a blur-less ROM would it be safe to use metamorphs as system files should be the same as most stock devices?

Gallery Issue
Guys, Freaking Great Job!! Hands down best rom I have had on D2.
Only issue I ran across is the Gallery is missing and I installed d2 gallery and its still no where to be found. Even tried to install the dx and stock with no luck.
Any Idears?
-Mike

[Q] Step by Step?

Hey guys!
Noob here who has flashed other phones in the past, but never anything Android based. Is there a step by step guide anywhere for the Mesmerize? Something generic and simple to follow from post root to a fully flashed phone?
Thanks for any input.
Tyler

Well our moderator is nowhere to be seen.. we should have a step by step sticked.. but we don't.
1) Root your phone. Search the forums to figure out how to do that.
2) Install RomManager and the ClockworkMod Recovery. There's a thread for that as well.
3) Download and install the ROM of your choice. Roms are located in the Dev Forums.
The details can be found in the Mesmerize General and the Mesmerize Development Forums. Search is your friend.

tyler.raven said:
Hey guys!
Noob here who has flashed other phones in the past, but never anything Android based. Is there a step by step guide anywhere for the Mesmerize? Something generic and simple to follow from post root to a fully flashed phone?
Thanks for any input.
Tyler
Click to expand...
Click to collapse
When I began this process about 2 weeks ago, I was at the same experience level as you Tyler. This is what worked easiest for me for my US Cellular Mesmerize.
(I'm just going to elaborate a bit on what Dcow posted, hopefully he doesn't mind .
Also keep in mind there are many variations to each step, this is what worked for me the easiest as a newb, hoping it does for you too.
And last but not least. There is always the disclaimer that attempting any of this can and will make your phone dysfunctional and or possibly bricked beyond repair (but most likely just dysfunctional which is a pain in the arse to deal with) if you do not follow steps completely (and of a trustworthy source such as xda).
So take your time, read each step that these people have taken the time to carefully write up, and you'll be just fine. Be patient as things don't always move fast and you never want to freak out as you may screw things up bad, when it's actually just taking longer than you would expect. There is alot going on behind the scenes so just give it time, trust me!
1) Root your phone. - Basically all this means is gaining the ability to give programs/apps and yourself SuperUser access (equivalent of being admin in windows) and also the ability to flash roms via recovery, detailed below.
The easiest way to root is to acquire the z4root.apk.
Download Here
After download, put z4root.apk on your SD card root directory
Then make sure in Settings->Applications that the "Unknown sources" box is checked.
If you don't have a file manager, download a free one from the market, using the file manager navigate to the z4root.apk and select to install it.
Reboot your phone
After it boots, open the z4root app and press root. At this point it is going to hang, give it 2 minutes and pull the battery. Count to 10, put it back in and turn it on. - This is normal, trust me.
After it reboots open z4root again and run it, this time it will run no problems and phone will reboot.
Once you are rooted (you will see the superuser icon in your apps, it will show apps you've given that permission to eventually) you will need to make sure you have a file manager that can request root permissions (read/write) before you will be able to complete the next step. Search the market for "root file manager" and pick one to download and install.
Also at this step I would download and install RomManager and TerminalEmulator as you will need these later.
2) Install RomManager and the ClockworkMod Recovery. These will basically just give you the ability to boot into recovery where you can more easily flash kernel's/rom's and anything else you wish to push to your phone.
I was able to install the Clockwork Mod Recovery very easily just by simply using the root file manager app I downloaded with these instructions.
Download the two zip files located in the first post here
Place both files on your SD card root
Using the root file explorer app, move the Redbend_ua file from the SD card to /system/xbin/
Long press on the Redbend_ua file and click permissions, there should be one check missing, check that.
Now open the TerminalEmulator
NOTE:The spaces below are actual spaces and the bml8 is a lowercase "L" not a "1" there is also a space after cd, after redbend_ua, after restore, and after recovery.bin
TYPE THIS ALL EXACTLY AS SHOWN BETWEEN THE QUOTES
at the command line ($) type "su" (then hit enter)
Type "cd /system/xbin" (then hit enter, which changes directory)
Type "redbend_ua restore /sdcard/recovery.bin /dev/block/bml8" (then hit enter, It will now scroll a bunch of text and reboot.)
After phone boots, open RomManager
Click on Flash ClockworkMod Recovery
Select the Samsung Fascinate your phone will still be the mesmerize
At this point you're all stock and ready for new kernel/rom.
3) Install Voodoo lagfix kernel and new 5.0 sound
If you want speed and good battery life (and high standard marks) +unlocking the headphone amp and eq controls (it makes even the samsung headset sound killer) go here and follow those steps for using your now functional recovery mode to flash the new Voodoo 5.0 kernel.
Note: There are a few ways of getting into this recovery mode, the best way if all else fails is to hold phone from the back with left hand (thumb on volume button, in the middle holding both down and pointer on power button) hold these down until the mesmerize logo pops up then slide your thumb down a bit to volume down only (if you slip don't worry it might blink but it'll still go to recovery)
Note: If you are more code/computer oriented there is a method using a program called ADB, which I'm not familiar with and seemed more complicated than what I went with. Search for that on the forum if you wish to do the above process that way instead.
4) Download and install the ROM of your choice.
Just pick one from this list Here, read through the first post of each before you decide, some are plug and play some take a few steps first.
Credit goes to all of the OP's and many others included in my sig, these people are awesome show them some love!

Thanks for the nice stepbystep. I wonder if pming the mod would help get it stickied? He still hasn't replied to my last pm though..

dcow90 said:
Thanks for the nice stepbystep. I wonder if pming the mod would help get it stickied? He still hasn't replied to my last pm though..
Click to expand...
Click to collapse
Agreed this should be a sticky! Thanks for the AWESOME write up bdemartino!

dcow90 said:
Thanks for the nice stepbystep. I wonder if pming the mod would help get it stickied? He still hasn't replied to my last pm though..
Click to expand...
Click to collapse
Did you PM me? I don't recall ever getting one from you. If I did, I apologise! I always try to be proactive in my forums
I check in on all my forums many times per day (even at work ) so if I miss something, please feel free to PM me anytime and I'll try to help where I can
I'll get in touch with bdemartino regarding getting a guide together that I can sticky
In the meantime Ill move this to general.

I few days ago I found an explanation here on how to do this:
http://www.howardforums.com/showthread.php/1694111-Installing-Clockwork-and-Voodoo-onto-the-Samsung-Mesmerize
(The same explanation bdemartino gave here today)
1. I used the files from there. How do I tell if I am running voodoo5?
2. If its not the same, I've read that I can install voodoo5 over another voodoo, correct?
3. Is anyone having trouble with 3g, vibrate, etc...on the mez? I saw in the voodoo5 thread that a few people were having trouble with these things. I couldn't tell if they were fascinate, mesmerize or captivate.
Sent from my voodooized Mesmerize using XDA App

gr4ybu5h said:
I few days ago I found an explanation here on how to do this:
http://www.howardforums.com/showthr...ockwork-and-Voodoo-onto-the-Samsung-Mesmerize
(The same explanation bdemartino gave here today)
1. I used the files from there. How do I tell if I am running voodoo5?
2. If its not the same, I've read that I can install voodoo5 over another voodoo, correct?
3. Is anyone having trouble with 3g, vibrate, etc...on the mez? I saw in the voodoo5 thread that a few people were having trouble with these things. I couldn't tell if they were fascinate, mesmerize or captivate.
Sent from my voodooized Mesmerize using XDA App
Click to expand...
Click to collapse
That is the old Voodoo kernel, you will need to go to the link I listed in my post for Voodoo 5, and yes you can simply disable lagfix and flash the new one over the old.
And no problems on the write up, I spent a good amount of time digging up the links and stuff but I'll spend a little more time polishing it and will post it in another thread for Scotsman to stickie.
And to answer your last question, no I'm having no problems with any functions of my phone after upgrading to voodoo 5.

Thanks for the write up and nice job on it too. It seems, sometimes when people try and tell others how to do something, they don't break it down enough. But you did and made it easy for us noobs. Thanks again.
My clockwork ( or voodoo, not sure) didn't come with a "disable lag-fix" button. I just have to create an empty file called "disable_lagfix". I'm just unclear where to put it. I saw it somewhere before I just have to find it
Sent from my SCH-I500 using XDA App

gr4ybu5h said:
Thanks for the write up and nice job on it too. It seems, sometimes when people try and tell others how to do something, they don't break it down enough. But you did and made it easy for us noobs. Thanks again.
My clockwork ( or voodoo, not sure) didn't come with a "disable lag-fix" button. I just have to create an empty file called "disable_lagfix". I'm just unclear where to put it. I saw it somewhere before I just have to find it
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
There isn't a button, per se. When you go in to recovery, there is a disable lagfix option under voodoo. You can put the file, disable_lagfix, in the voodoo folder on your sdcard to do the same thing.
He does write up a good how-to, though, doesn't he.

Haha thanks guys, and you're welcome!
I think the reason you don't usually see this much detail from others is because they are more developmentally enabled and therefore "forget" to break down the little steps that are second nature to them but foreign language to a non-developer.

Thanks. I found it. and disabled it aready. now i just download the file in the write-up and boot into recovery, install zip from sd card and select my file correct?

I always wipe dalvik cache (in advance settings within Recover) before flashing anything.
So it's;
Disable Lagfix
Reboot (you'll hear the chick reversing the process)
Clear Dalvik
Install voodoo 5.0 from zip
reboot
re-enable lagfix and reboot one last time.
Then you'll need to download the voodoo controller app from the market to control the amp gain and set a few other eq settings.

Man you guys are fast. Thanks for the quick replies. WOW
Ive done all that except re-enable lag-fix. Noone ever mentions that step. Do I just remove the "disable_lagfix" file from the voodoo file and reboot?

I just enable/disable it through the voodoo menu in recovery, much easier than pushing files around. In your case i think you should be able to delete the file and reboot, but if not you may just need to go into voodoo and enable it that way (after removing the disable file)

I guess if I edit a post and dont finish it, the post gets deleted. Oh well, I asked how to reenalbe lag fix but i figured it out. Like I said I had to put the disable lag_fix file in the voodoo folder. I just had to remove it from that folder.
Is there a way to tell (besides the quickness and the extended battery life) how do i tell if its voodoo5? just out of curiousity

Just a guess here but possibly under About Phone the kernel version might? Mine is listed as 2.6.29
I would also think that when trying to use the Voodoo app it would fail if you didn't have the kernel so that would be a sign too, if that's what you're looking for.

Well thanks alot. Thats what mine was listed as also. And the voodoo app did work, so I guess I've got it. And I think thats all for now.
Now I think I might wait to see the awesome developers come up with for 2.2. I dont mind the stock 2.1 for now. I just dont want to keep flashing ROM's, if they might be close to getting a version of 2.2 going. I can wait....I think.
Thanks Again

gr4ybu5h said:
Well thanks alot. Thats what mine was listed as also. And the voodoo app did work, so I guess I've got it. And I think thats all for now.
Now I think I might wait to see the awesome developers come up with for 2.2. I dont mind the stock 2.1 for now. I just dont want to keep flashing ROM's, if they might be close to getting a version of 2.2 going. I can wait....I think.
Thanks Again
Click to expand...
Click to collapse
2.2 is so close, you should be able to smell it. I've had it's froyo-ey goodness all over my phone and even with the issues we're still having, I flash it back every night when I get home to play with it.

phidelt82 said:
I've had it's froyo-ey goodness all over my phone
Click to expand...
Click to collapse
That's what she said....

[HOWTO] install CM6 RC3 to XT720 from stock (newbie friendly)

Let's begin
1st download all the necessary files:
Motorola 5.4.0 Driver with MotoHelper http://www.motorola.com/consumers/v/index.jsp?vgnextoid=bda09ec8009a0210VgnVCM1000008806b00aRCRD
stock UK XT720 sbf and RSD Lite 4.9 from http://forum.xda-developers.com/showthread.php?t=953863
SuperOneClickv2.1.1 ftom http://forum.xda-developers.com/showthread.php?t=887416
OI File Manager or from Android Market
Open Recovery for XT720 from http://forum.xda-developers.com/showthread.php?t=1242259
CM6 RC3 from http://forum.xda-developers.com/showthread.php?t=1197655
Then proceed to install the windows drivers for XT720,
once that is done flash your XT720 back to factory stock,
to go into ROM flashing mode Hold Power + Volume Down + Camera buttons all at once, be patient, it will take a while and a couple of reboot.
When the phone is finally done booting up, go into Settings > Applications, and check the boxes for USB debugging + Stay awake,
now you can run SuperOneClickv2.1.1 to root your XT720, for step by step rooting instructions follow this guide http://forum.xda-developers.com/showthread.php?t=887416
Next you will want to install a File Manager to your XT720, the stock XT720 doesn't include any file manager,
open a command line (in windows run CMD),
switch to the directory ..\SuperOneClickv2.1.1-ShortFuse\ADB\
run the command line adb.exe install FileManager-1.1.6.apk
The next step is best done using a microSD card reader, then you can drag & drop all the files for your XT720 directly to the SD card from Windows Explorer
- OpenRecovery.apk,
- the unzipped files from OpenRecovery-XT720-01 folder,
- update-cm-6.3.0-RC3-MilestoneXT720-signed.zip,
- gapps-hdpi-20101114-signed.zip
Using the OI File Manager install OpenRecovery.apk (it should be at the root of your SDcard),
run Open Recovery from XT720 stock launcher's app drawer,
select Install Recovery System (allow super user),
then follow the instructions to install OpenRecovery-XT720-01 from http://forum.xda-developers.com/showthread.php?t=1242259
Once you are done proceed to install update-cm-6.3.0-RC3-MilestoneXT720-signed.zip, and gapps-hdpi-20101114-signed.zip using OpenRecovery-XT720 (for details follow http://forum.xda-developers.com/showthread.php?t=1197655),
select clear cache, dalvik, and factory reset
choose the reboot option from OpenRecovery-XT720 menu,
the first boot of CM6 will take a very long time,
when you see the launcher, let it finish loading, then reboot the phone again via power button > reboot,
after this last reboot, the phone is finally ready for normal usage.
Enjoy!

You can get the Dexter's OpenRecovery.apk here

you can use universal androot to root your phone alternatively. its super easy. just drag it onto your sd card (or download directly from your phone), install the apk, and click root. heres a link. http://www.4shared.com/file/HvHnis8C/Universal_Androot_v161.html

I actually did this to a friends xt720 yesterday and I needed to fix the APN settings, he wasn't getting data.

WARNING, about BusyBox newer than v1.17.1 and Link2SD
So i found out the hard way there's an odd bug with BusyBox 1.18.x or newer it conflicts with Link2SD, it wont mount and causes Link2SD to throw this message
Code:
Mount script error
Mount script cannot be created
mount: mounting /dev/block/vold/179:2 on /data/sdext2
failed: no such device
reverting BusyBox back to 1.17.1 fixed the problem

Help on Boot Loop
Followed all instructions here to update to the the cm 6.3.0 RC3. Everything appeared to go as stated, but after reboot i seem to be stuck in a vicious boot loop. I get the cyanogen mod droid logo but it seems to pop up every 10 seconds or so without the phone ever starting up. Any help would be greatly appreciated. It's cute as a paperweight, but not much good as a phone.
Disregard....after rebooting for nearly nine hours....the phone finally started up and appears to be working....Thanxxxx

I too now am unable to access data....i am not skilled enough to work with the APN settings. Could you please help me out on what i need to do to get my data working again...no internet access sux....

AllGamer said:
Next you will want to install a File Manager to your XT720, the stock XT720 doesn't include any file manager,
Click to expand...
Click to collapse
Awesome Instructions bud, much needed for the first timers. Just thought I would add that stock 2.1 always came with quickoffice for me and that's what I normally use at first to install Open Recovery but always end up needing a better File Manager anyway. So either way, I hate to be a stickler just might be one less step lol. Good job AllGamer dude!
Ps.. I should have just said good job dude your way is better lol.

hitech1 said:
I too now am unable to access data....i am not skilled enough to work with the APN settings. Could you please help me out on what i need to do to get my data working again...no internet access sux....
Click to expand...
Click to collapse
Install APN manager from the market and find your carrier there.
You could always just input them manually, doesn't require any skill bud, you just have to google the correct APN configuration details.

nice App
JiroPrinz8 said:
Install APN manager from the market and find your carrier there.
Click to expand...
Click to collapse
https://market.android.com/details?id=ale.android.apnmanager&feature=search_result
this is an Excellent recommendation.
I didn't even know such APP existed
it's so easy to enter APN data... pick and choose, done!

Don't think you should be flashing ROMS if you're hesistant about manually entering an APN, my 2 cents lol.

I would still rather recommend singapore rom, with the tv out and everything. Don't know of any cons with this atm.

Hi,
i installed cm6 rc 3 as described above. And it runs very smooth and stable.
Although i have one big problem: If i insert my sd-card (3gb fat + 1 gb ext4, with app folder on ext partition) in my phone, app2sd works as it should and the phone boots as usual. But when the phone shuts off the display and goes into sleep mode, i am no more able to wake it up again. When I push the power button only the leds switch on. I have to pull the battery and restart the phone.
If sdcard is not inserted, everthing works great. with no problems since three days now.
But i would like to have my sdcard back...
Perhaps some can help me.

Leotronick said:
Hi,
i installed cm6 rc 3 as described above. And it runs very smooth and stable.
Although i have one big problem: If i insert my sd-card (3gb fat + 1 gb ext4, with app folder on ext partition) in my phone, app2sd works as it should and the phone boots as usual. But when the phone shuts off the display and goes into sleep mode, i am no more able to wake it up again. When I push the power button only the leds switch on. I have to pull the battery and restart the phone.
If sdcard is not inserted, everthing works great. with no problems since three days now.
But i would like to have my sdcard back...
Perhaps some can help me.
Click to expand...
Click to collapse
I'm not certain but I think this means that Android thinks your battery has more charge than the hardware does. I would first try to redo battery calibration (there are threads in the XT720 general section about how to do this) if you can convince yourself that your battery is actually full. It can be a little tricky.

Leotronick said:
Hi,
i installed cm6 rc 3 as described above. And it runs very smooth and stable.
Although i have one big problem: If i insert my sd-card (3gb fat + 1 gb ext4, with app folder on ext partition) in my phone, app2sd works as it should and the phone boots as usual. But when the phone shuts off the display and goes into sleep mode, i am no more able to wake it up again. When I push the power button only the leds switch on. I have to pull the battery and restart the phone.
If sdcard is not inserted, everthing works great. with no problems since three days now.
But i would like to have my sdcard back...
Perhaps some can help me.
Click to expand...
Click to collapse
might be your vsel being too low. it happened to me too, and i made the vsel a little higher and it didnt happen anymore.

Hi, I have a noob question...
Can I install this recovery image (CM6) directly from stock Videotron SBF?
I do have install open Recovery based on Androidiani. Can I flash this Rom (CM6) with that recovery or I need something diffrent?
Thanks for your help!

speedmax said:
Hi, I have a noob question...
Can I install this recovery image (CM6) directly from stock Videotron SBF?
I do have install open Recovery based on Androidiani. Can I flash this Rom (CM6) with that recovery or I need something diffrent?
Thanks for your help!
Click to expand...
Click to collapse
if you are already on stock, then yes you can flash CM6
but make sure you are rooted first
and use the Open Recovery XT720 listed in the OP topic

AllGamer said:
if you are already on stock, then yes you can flash CM6
but make sure you are rooted first
and use the Open Recovery XT720 listed in the OP topic
Click to expand...
Click to collapse
Thanks, I Will proceed tomorow.
Regards,
Sent from my MB860 using xda premium

Just installed! Working nice...
Camera and camcorder are working, it was a bug with stock Rom.
Is there a Overcloking kernel for XT720 CM6 rom?
Or is there a way to overclock it with the current one?
Regards et thanks for your help!

speedmax said:
Just installed! Working nice...
Camera and camcorder are working, it was a bug with stock Rom.
Is there a Overcloking kernel for XT720 CM6 rom?
Or is there a way to overclock it with the current one?
Regards et thanks for your help!
Click to expand...
Click to collapse
yes, just download the milestone OC utility from Android market

[GUIDE]How to load CM9 on GSIII

**this was a very early guide and most of the files and methods referenced in it are long outdated, sounds crazy I know as the phone has barely been out, but i recommend finding more recent guides at this point. I wanted to leave this up for archival reasons though. As of 7-22 I am running dhackers CM10 build with great results. Just don't forget to set max cpu clock back down to 1500 mhz if you don't want it over locked out of the box **
As per the usual disclaimer....at your own risk, be aware of IMEI loss issues and whatnot...basically cover your own butt.....and enjoy.....
7-15 2:46pm **As of right now voice and SMS are not working on my phone while other people report they are working fine. While you can still play around and see just how amazingly fast CM is on this phone, YMMV. If it doesn't work you need to know how to go back to stock before trying this.
7-29 this guide is very old, it pre-dates kexec and is only here for historical purposes
For clarification: The question was asked if one is supposed to follow the original Team Epic Kexec kernel instructions or these steps and the answer is two fold. If your goal is to install the UNOFFICIAL CM9 built by Invisiblek (which is the purpose of this thread), then you follow the steps in THIS THREAD ONLY. There are a couple steps and a couple files linked to in the original Kexec page that will not allow you to install CM9. That page was made for those wanting to try out their Kexec Proof of Concept KERNEL, not install a ROM of any kind.
This thread makes some assumptions, such as you already have a working install of the Android SDK and ADB, you already have the drivers installed, you are using the original USB cable that came with your phone, you know how to move around DOS to get to the directory where you downloaded the files, etc.......those lower level tasks are for another thread.
To Try Our Proof-of-Concept Kernel <<<The base of these instructions was the Team Epic Kexec Kernel page seen at this link, Many Thanks to them
Thanks to Invisiblek for clarifying and helping me get steps just right.
The following is an adaptation of the CM Kexec kernel proof of concept with the changes in files and steps necessary to load the latest CM9 work in progress. Be advised I take no credit at all. This is the work of Team Epic and Invisiblek. I just put this together for myself and for others who would like to try it with one caveat. DATA doesn't work! Voice and SMS only....and maybe 1xRtt data.....so you will be relying on WiFi for data! You've been warned!
Also, I highly suggest you use a free MD5 Hash checking utility to verify the integrity of the files you are downloading. That is why the MD5 hash is provided, so you can be sure you didn't get the wrong file or a corrupt download that could cause a BRICK!
If you don't follow the directions carefully you can end up with a brick! Ask questions after reading the OP if you still aren't sure. I probably won't know the right answer for sure. You may have to wait on someone with more experience in this to answer your question.
DO NOT ACCEPT AN OTA UPDATE WHILE RUNNING THIS SETUP
1. Download the recovery.img (MD5: f1c01ad20e02751a73188f173eb412ca), which combines our source-based kernel with our previously released CWM v4.
2. Flash the recovery.img following these instructions, that is:
Code:
adb push recovery.img /sdcard/
adb shell
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p18 bs=256k
sync
3. Reboot into recovery (using volume up, home power buttons), wipe data, install one of invisibleks CM9 roms>click here for all of his CM9 roms< which do not have boot.img integrated, then continue with the steps below:
4. Download these additional files:
(required download)boot.img (MD5: db058f4b15df0fa1b9ee04a5c17cf103), which is invisibleks custom boot.img
It would be good at this point to read ahead and determine where you will be loading the next file. Keep in mind if you are in stock recovery and choose to wipe data, this will wipe the internal memory.
if you plan to load onto internal memory download this file boot_emmc_boot_img.zip (MD5: 84a3f98c194f6dedc583dbc75ccc34c2)
or
if you plan to load onto sdcard (ext) memory download this file boot_sdcard_boot_img.zip (MD5: 88904d7e69d455ff88756b4d1ad79aac), which are applied in recovery to kexec (boot) the custom boot.img.
5. Place boot.img either on the internal SD card (the /sdcard/ folder), or on the external SD card (the /mnt/extSdCard/ folder).
The boot.img kernel boots directly out of one of these folders, it will not (and should not) be flashed to the device.
6. If you're using the internal SD card, place boot_emmc_boot_img.zip in /sdcard/ as well. If you're using the external SD card, place boot_sdcard_boot_img.zip in /mnt/extSdCard/.
7. Reboot into recovery.
8. If using the internal SD card, select "Install zip from sd card" and then "choose zip from internal sdcard", then "boot_emmc_boot_img.zip". Alternatively, if using the external SD card, select "choose zip from sdcard", then "boot_sdcard_boot_img.zip".
At this point, the device should reboot "in the middle" of applying the update, temporarily booting boot.img. If the update "completes" and returns to the CWM menu, kexec has failed or the wrong recovery was loaded in the beginning. Please check the locations of boot.img, and boot_emmc_boot_img.zip or boot_sdcard_boot_img.zip and verify recovery.img file used was the correct one, verify using an MD5 hash checker.
9. Once booted, the custom kernel can be confirmed by checking "Kernel version" in "Settings", "About device". It should report:
3.0.8-gdefeb6f
[email protected] #1
SMP PREEMPT Sun Jul 8 04:27:58 EDT
2012
10. To reboot into the stock kernel, select "Restart" from the Power menu, which will actually reboot into CWM recovery. Press the Power button to select "reboot system now" and leave recovery.
11. You cannot simply power on your phone with this setup! In order to power on your phone you will have to hold volume up, home and power to boot into recovery and load the zip file you chose at step 4 where you chose either internal or external memory, so either "boot_emmc_boot_img.zip" or "boot_sdcard_boot_img.zip". If you do accidentally boot up by just hitting power, no big deal, it will give you all sorts of force closes, simply pull battery and boot back up using the Vol up, Home, power method.
If anyone would like to suggest further clarification, please do. To get the stock Google apps such as Play Store get the package HERE and install in recovery
Alternatively a more condensed version of this install procedure has been posted by nbsdx and can be found HERE.
7-15 2:46pm **As of right now voice and SMS are not working on my phone while others are working fine. While you can still play around and see just how amazingly fast CM is on this phone, YMMV. If it doesn't work you need to know how to go back to stock before trying this.
If you want to return to bone stock, simply go to THIS THREAD to get STOCK ROM IMAGE and then put your phone into Odin Download mode by following THIS THREAD and be sure to flash it using the PDA button. It will take a while, probably 20 minutes or so, it will take forever to boot up the first time but you will be on bone stock like new.

Very informative. Would read again.
Sent from my Transformer Prime TF201

dual boot
Being that we have to use kexec anyhow, it would be nice (especially with the state of current cm9 rom) if we could fully dual boot so as to keep stock system and data for stock kernel.
Like here,
http://www.epiccm.org/2012/07/dualboot-cm9-on-sgs3-lte-sprint-t.html

I just installed successfully using the instructions in the OP so I can confirm it works correctly. Holy crap it's fast.

Anybody want to put up a video of how well it runs for us that aren't brave enough to put it on our own phones?
Sent from my SCH-I535 using xda premium

dakalter said:
Anybody want to put up a video of how well it runs for us that aren't brave enough to put it on our own phones?
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I'll leave that part to someone who doesn't sound like a retarded redneck on video.

silasrye said:
I tried to install the vzw cm9 (with with invisiblek's boot.img put back into the zip) via this method exactly.
http://www.epiccm.org/2012/07/dualboot-cm9-on-sgs3-lte-sprint-t.html
fake cwr works, and everything went fine, but when i try to flash boot_cm9.zip i stay in cwr.
I am using the cwr from this post
http://forum.xda-developers.com/showthread.php?t=1773514
I had started with the twrp from that post, but it didn't recognize my internal sdcard.
So, I don't see why this shouldn't be a doable thing. But something probably needs to be redirected somewhere.
The good news is, I boot into my normal rom without problem.
Click to expand...
Click to collapse
If you follow the steps in this thread, including using these links for your files, it will work without a problem.
I can't comment on why other guides on other sites using other files don't work.....and not really sure how it applies to this thread. Lets try to keep it on topic. If you have issues with the dual booting instructions, you might start a new thread to address that or jump in irc.freednode.net/verizons3 and graciously ask the people for help
When you flash the the CM9 rom built by Invisiblek it will come back out to CWR menu. At that point in the process I realized I hadn't copied the boot.img file into the root of my sd card, so i left it on the CWR menu, popped out the sdcard, copied the boot.img file over (already had the boot_sdcard_boot.img file on the root of sdcard), and popped the sdcard back in, chose advanced->reboot recovery, then followed the steps in this guide, worked perfectly.

silasrye said:
I tried to install the vzw cm9 (with with invisiblek's boot.img put back into the zip) via this method exactly.
http://www.epiccm.org/2012/07/dualboot-cm9-on-sgs3-lte-sprint-t.html
fake cwr works, and everything went fine, but when i try to flash boot_cm9.zip i stay in cwr.
I am using the cwr from this post
http://forum.xda-developers.com/showthread.php?t=1773514
I had started with the twrp from that post, but it didn't recognize my internal sdcard.
So, I don't see why this shouldn't be a doable thing. But something probably needs to be redirected somewhere.
The good news is, I boot into my normal rom without problem.
Click to expand...
Click to collapse
You need to add one line to Invisiblek's updater-script that "flashes" the boot.img to the bootloader partition in the multi boot folder. Check out the sprint cm9 install for the line to add.
I have tested dual booting to work perfectly.

is the data not working due to the ril??

suzook said:
is the data not working due to the ril??
Click to expand...
Click to collapse
yes, will update OP once we have working 3G/4G data
as of right now my voice and SMS isn't working while others is.....trying to figure it out

I flashed back to stock, simply because I need to have voice and SMS working. I could deal without 3G/4G data for a little bit and use WiFi, but no SMS/Voice was a deal breaker on my phone. I have to be easily gotten in touch with for work and such. It was fun while it lasted.

Will these same instructions work for the CM10 build that is in the server list?

17akota said:
Will these same instructions work for the CM10 build that is in the server list?
Click to expand...
Click to collapse
No. Different files used, probably a different step or two also. I plan to edit this once CM10 builds are ready for public consumption. These instructions also don't include the automated kexec scripting work done recently that allows your device to cold boot into CM9.
Sent from my SCH-I535 using xda premium

neyenlives said:
No. Different files used, probably a different step or two also. I plan to edit this once CM10 builds are ready for public consumption. These instructions also don't include the automated kexec scripting work done recently that allows your device to cold boot into CM9.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I figured that.
Could you point me in the direction of the new Kexec? I read about it somewhere and would like to try it out.

17akota said:
I figured that.
Could you point me in the direction of the new Kexec? I read about it somewhere and would like to try it out.
Click to expand...
Click to collapse
irc.freenode.net #verizons3
Sent from my SCH-I535 using xda premium

i came from a thunderbolt, and know how different a RIL can be from phone to phone, so i ask this quite seriously...
How different is the RIL from the Gnex to the SGIII?

seang said:
i came from a thunderbolt, and know how different a RIL can be from phone to phone, so i ask this quite seriously...
How different is the RIL from the Gnex to the SGIII?
Click to expand...
Click to collapse
Completely different processors.

Is there anyway to get the TouchWiz Camera on CM9? I really like that camera app.
I tried just putting it in /system/app and changing the permissions to rw-r--r-- and rebooting and nothing
Then i tried just installing it like a normal apk and it failed.
I would love CM9 if i could just get the stock camera app too work.
BTW im using DHacker29's CM9 and its amazing. So much easier to install.

17akota said:
Is there anyway to get the TouchWiz Camera on CM9? I really like that camera app.
I tried just putting it in /system/app and changing the permissions to rw-r--r-- and rebooting and nothing
Then i tried just installing it like a normal apk and it failed.
I would love CM9 if i could just get the stock camera app too work.
BTW im using DHacker29's CM9 and its amazing. So much easier to install.
Click to expand...
Click to collapse
It probably requires touchwiz frame work. It will take significantly more work than just dropping in an apk
Sent from my SCH-I535 using xda premium

DHacker's CM10 is awesome!! I've been running it all day and Jelly Bean is really smooth on the S3.
http://www.droidhive.com/forums/index.php?/files/category/26-sgs3/
Check it out guys.