Proclip finally! - Verizon Droid Charge

ok guys, just a quick heads up, Proclip finally released a mount for us. I mean, its nice, but I think I prefer the samsung one only because of the dedicated line out and power port slide switch.
what do you guys think.
http://www.proclipusa.com/brodit-de...rge/holder-with-tilt-swivel-511259-18682.aspx

Looks nice but the samsung is cheaper.

that may be, but you have more options on location depending on the vehicle you have and what mounts are available for said vehicle. Also, build quality imho is a lot better with proclip. I have owned several mounts from them over the years with the exception of the charge since I needed a mount stat and these weren't available yet. Wish I could have wait, not like the samsung one is that bad in comparison, i just prefer to keep things tidy in the car and not have random mounts popping out of the top dash or dangling from the wind shield hehe.
Now, all that in consideration, I am not unhappy with my samsung mount...I just wish I could have waited longer till this got released.
Proclip mounts are worth it nevertheless.

Related

Car Mount

Here you go boys and girls... get them while they 20 bucks cheaper @
http://www.cellularaccessory.com/ecs-m979beg.html
This is the official Samsung USA car mount found here:
http://www.samsung.com/us/mobile/cell-phones-accessories/ECS-M979BEGSTA
luckyduck69 said:
Here you go boys and girls... get them while they 20 bucks cheaper @
http://www.cellularaccessory.com/ecs-m979beg.html
This is the official Samsung USA car mount found here:
http://www.samsung.com/us/mobile/cell-phones-accessories/ECS-M979BEGSTA
Click to expand...
Click to collapse
that looks pretty nice but even still a little pricey.
mavictb said:
that looks pretty nice but even still a little pricey.
Click to expand...
Click to collapse
just got mine in today... it's legit badass. very sturdy and it's a suction cup that actually holds suction. the actually phone holder offers 360 degrees rotation and tilt. i give it two thumbs up!
I just got one from http://www.thecellguru.com/Products/26866 for a little under $33 delivered. I have used Cellularaccessory (the OP's source) in the past and found them very helpful as well.
The mount is "OK" in my book. While nicely made and holds the phone well, it isn't anywhere near as adjustable as I would like in terms of angles. There is only a small amount of adjustability in the ball joint that connects the cradle to the arm, perhaps +/- 20 degrees.
Another drawback is it launches the &*^%ing car-mode app/screen and ties it to the home button, which makes for a less-than-useful phone (until I can figure out how to customize that app away).
On the plus side, the lever for the suction cup is very easy to use (much better than, for example, the twist-to-lock used by TomTom).
I also like that there isn't stress on the phone's micro-USB connector. That connector has been a failure point on other phones.
It includes a standard Samsung CLA, which may or may not be able to provide the 1.1A that the T959V can take to charge. I use a USB cable and the Elago 1A (dual) CLA-to-USB which lets me charge the phone, as well as a headset/speakerphone from a single socket. Apparently Amazon has seen enough sales of the Elago line (love their Nano II microSDHC reader) that they have picked them up themselves. JoWow has been good in the past for many orders and Elago items (they were previously the only Amazon-related source).
I'll probably end up ditching the suction-cup arm and figuring out how to better mount the cradle. From what I have read, it isn't the industry-standard pattern, so it will have to be something custom.
I actually made my own mount using a cheap piece of crap mount off Amazon and my old Magellan GPS mount. I took the front part that actually holds the phone, and used a dremel tool to cut new holes in the back so that it would slide on to the arm assembly of the GPS mount. Fits perfect and looks awesome. Best of all, it doesn't fall off my windshield anymore!
Anyone have an issue using a bluetooth headset while docked? It seems to disable unless I undock, make call, and redock.
Sent from my SGH-T959V using XDA Premium App
I was actually thinking about getting:
cgi.ebay.com/Samsung-Galaxy-S-II-4G-Car-Mount-CD-Dash-Holder-Dock-/150620135124?pt=LH_DefaultDomain_0&hash=item2311a8ded4#shId
It mounts to the CD player.
jchambers said:
I was actually thinking about getting:
cgi.ebay.com/Samsung-Galaxy-S-II-4G-Car-Mount-CD-Dash-Holder-Dock-/150620135124?pt=LH_DefaultDomain_0&hash=item2311a8ded4#shId
It mounts to the CD player.
Click to expand...
Click to collapse
Make sure you let us know how that works out. It's interesting... But what if you wanna mess around with your cd player?
What about the ac vents? Perfect spot. Ready to reach, out of the way of everything...
Sent from my SGH-T959V using XDA App

Car mount for touchpad?

I have been looking at vehicle mounts for my new touchpad, but have come up a little short. From my experience, most (if not all) of the universal mounts are horrid. Knowing that many of the Ipad/Ipad cases are compatible, I wonder if any of Ipad vehicle mounts are compatible as well. Does anyone have experience with any of these?
Just out of curiosity... what would you be mounting the touchpad in your vehicle for?
LateralOctober said:
Just out of curiosity... what would you be mounting the touchpad in your vehicle for?
Click to expand...
Click to collapse
My thought is to tether it to my galaxy s II for internet, and also share GPS. My receiver has an aux input, so all of the audio will run though my car's speakers. Hopefully I will be able to listen to internet radio/mp3, take and receive calls, navigate, etc. using the touchpad.
Try this one:
http://www.ram-mount.com/NewProducts/tabtiteipadmount/tabid/3617/Default.aspx
I'm using that holder (I used a different mounting system that I already had - just ordered the 'cradle').
As for Why: I've been doing 10" Tablet GPS with my Viewsonic G-Tablet and now my Touchpad for over a year.
You can pick up an inexpensive Bluetooth GPS (or use sharegps on your android phone). You can then either tether to cell for data (and use Google maps, waze, etc), or you can buy something like CoPilot and use offline nav.
If you do a lot of road time, it's a great tool.
sounds like a good idea, maybe i will try that. Thanks!!!
I really want to be able to leave my TP in my aCase when in the vehicle, it is just too much of a hassle to take it out. For this reason, I've decided to fabricate my own vehicle mount. I have a few ideas, but I'm going to have to wait for some materials to arrive. When I get something together, I will definitely post some pics and/or video here.
On a side note: I am unable to connect my TP and Galaxy SII via bluetooth using CM7.1 Alpha 2.1, so there isn't much I can do yet. Here's to hoping that its fixed in the next release.
http://www.youtube.com/watch?v=x6wqheBYpIU
Not sure if this helps anyone but it's what I did!
I just ordered the RAM-B-166-TAB3U so ill post a youtube video when it comes this weekend.
How did it work out for you?
I've also started to research car mounts pretty heavily for a couple of reasons. One, navigation and easy access for other tablet tasks I might need while on road (focused and within reach of me as driver), but also Two, for my kids to YouTube and NetFlix from the rear seats.
Due to these needs it seems the best options are either the floor (bolt that connects to seat) mounts seem to be the most effective or cup holders. Something tells me the cup holders won't hold it securely enough while in motion but also are typically geared for driver/passenger need and wouldn't be high enough to view from the rear.
This led me to believe the air vent mounts or suction mounts would be most ideal for all needs but again, tend to be less firm in motion and also don't allow for actual interaction with the tablet as pressing it will probably dislodge it.
VERY interested in staying up to date on this thread, anyone with any suggestions and/or recommendations, please chime in!
I forgot where the video is, but someone was able to install a nook color directly into their car (honda accord I believe), as in the nooks screen was basically the head unit. Looked pretty slick, and might be an option. Other than that, I would trust very few car mounts with my tp.
I bought one on ebay for 20 bucks. Came with a case,screen protecter and stylus. Cant wait to get it in
Sent from my pos motorola using xda premium

Car Charger and Dash Mount

Ever since I found out kids with better parents than mine could movies in their car I wanted to the same. Except I would be driving not riding.
Helpful tool: http://www.amazon.com/gp/product/B004M8ST36/ref=oh_o02_s00_i00_details
It says windshield mount but I use it on my dash and it works perfectly fine. An important note (for all suction based cradles): heat your car up first as cold air and suction cups do not mix well for your device's longevity.
Charging while doing so: http://www.amazon.com/gp/product/B004MUBXO6/ref=oh_o01_s00_i00_details
A highly reviewed item but one which I think has damaged my battery as my battery life is now awful. I suggest searching for the official Samsung car charger instead.
I've always used the ProClip Move system (branded as Brodit outside of the US) so any of our devices can move between any of the mounts in our cars. Nice thing is it is secure from falling (i trust this more than suction cups which always seem to fail for me) and it's fast to just slide the device in and out. proclipusa.com
Does the proclip mount for the GT7 (1st Gen) Tab work for the GT7+?
Here's another option: http://www.samsung.com/us/mobile/galaxy-tab-accessories/ECS-K1E2BEGSTA
shadejinx said:
Does the proclip mount for the GT7 (1st Gen) Tab work for the GT7+?
Click to expand...
Click to collapse
I've never used the ProClip device specific mounts. I usually either stick the Move system male onto the cardock of my devices or for the tablets, I stick it to the case I'm using. I like the thin quality of the Move system as I can stick them to the device's case and not add a lot of bulk.
I have vehicle specific Proclip mounts that then have the female Move adapter attached. This way no matter which of us drive either vehicle, my wife and i always have a way of mounting any of our devices to the dash.
edit: I must add that the Samsung official vehicle mount for this that theundeadelvis linked to is intriguing - just really expensive compared to the price of the actual unit. The other problem with that mount is that you probably wouldn't be able to use it with a case. The major advantage is the 30-pin connector looks like it would be a clean looking slide-in instead of mine where the power cable hangs loose when the tablet isn't in my mount.
bought mine yesterday....the dash mount...on RM 30 (or US$ 10)...
originally for 7, but work perfectly for my 7+...
masterinc said:
bought mine yesterday....the dash mount...on RM 30 (or US$ 10)...
originally for 7, but work perfectly for my 7+...
Click to expand...
Click to collapse
Do you have a link?
I just got this: http://www.dealextreme.com/p/car-ab...-cup-for-samsung-galaxy-tab-p1000-black-54828
It works, though a bit tight. I heated up the 90 degree angle plastic part of the thinner "one arm" end of it and bent it out a little bit to make it easier to get the Tab in. That's all it needed, really, though it did work without modification too
Just be careful, as in many US states, having a screen visible to the driver displaying videos is illegal (not to mention, probably really dangerous). With a dashmount it'd also be extremely easy to see from another vehicle.
That's why you see the in-car video monitors almost always visible only from the rear seat. Otherwise if they're visible from the front they typically have a gear-lock so they won't display when the vehicle is in motion.
Just a heads up. Stay safe!
speedrabbit said:
Just be careful, as in many US states, having a screen visible to the driver displaying videos is illegal (not to mention, probably really dangerous). With a dashmount it'd also be extremely easy to see from another vehicle.
That's why you see the in-car video monitors almost always visible only from the rear seat. Otherwise if they're visible from the front they typically have a gear-lock so they won't display when the vehicle is in motion.
Just a heads up. Stay safe!
Click to expand...
Click to collapse
Indeed. It is foolishly dangerous to drive while watching South Park. I try to mitigate the danger by watching during deadlock traffic.
Another note to fellow drivers:
I believe simply having such a large object on the dash can count as obstructing your view so that is an additional risk.
first post
Honestly if you have the funds go and get a ram mount you will not be sorry. I've had it with cheap mounts that fall off the windshield, a PITA to adjust or keep needing adjustments and stuck with the 1 size works for everything designs.
Won't let me post links so search for "RAM X-Grip II Universal Spring Loaded Tablet Holder & Mounts"
The arms and ball are made from aluminum and powder coated, the ball is also rubber coated. It's a universal system so it be configured however you like. Add another arm, swap the short arm for a longer one, want 2-3 arms? windshield suction cup to a handle bar mount no problem. Have the suction cup but no where to put it on windshield? get a adhesive suction cup base (sticky backed disc mounts on rough surface --->dash so the suction cup will work) they even sell the bean bag mounts too (weighted and anti-slip)
I have 2 of these currently. the one on my quad is 5 years old handle bar mount with the standard arm holding a gps (garmin 78cxs water resistant up to 8 hours and floats) I rolled my quad, smacked tree branches and crashed my body into it when i drive into a mudholes. With the countless car washes to remove the dust, clay, mud etc this mount has never let me down, it stay on my quad all the time, zero corrosion, all the hardware is stainless steel. I even used this on the boat (salt water) borrowed the suction cup off the cell phone mount.
the windshield mount for my cell phone is rock solid and never moves or needs adjustment once set (universal cell phone holder). Very little flex (all from the bit of flex from the rubber suction cup). hardly any vibration at all. No problems reading incoming text while on the road. I save the replies for the lights.
---------- Post added at 09:40 PM ---------- Previous post was at 09:35 PM ----------
Like to add I know it's like 50-60 bucks but it will be your last mount you will ever buy. If i ever replace my quading GPS it would only cost me 10-14 bucks for new holder i can reuse everything else.
I found these at my local GPS store.
Anyone know if the tab + would fit in the original tab car mount?
It will fit but not perfectly. The fit is very tight. It helps to sand down the original mount to make the 7+ fit a little better. Not an ideal solution but you can make do if is all you have. And the charging does work with the 7+.
The OEM mount from Samsung also puts the Tab+ into "car mode". This keeps the backlight on if using for GPS or to watch videos.
As far as I can tell, they either haven't started making the mount for the Tab+ or it is severly backordered. I have been waiting for an email from Samsung announcing it is available for order, for a couple months now.
Also, RAM has a Tab+ specific mount for around $20. You can then decide if you want to pay extra for a suction cup add-on or a permanent mount. These add-on mounts also will attach to the OEM mount, since it uses a standard slide lock found on most high end vehicle mounts/cradles.
willyam111 said:
It will fit but not perfectly. The fit is very tight. It helps to sand down the original mount to make the 7+ fit a little better. Not an ideal solution but you can make do if is all you have. And the charging does work with the 7+.
Click to expand...
Click to collapse
I did a google search on possibly installing the tab in my car as a replacement for my head unit.I think I came across your install from your sig I saw on the tab?
Yeah that is my install. Let me know if you have any questions on how I did it or what its like to live with on a daily basis.

[LIST] Desk, Car, And Other Docks & Stands

Mounts - Docks - Stands - And Other Gadgets
I thought since so many of us have found pretty creative ways of using our tablets, it may be nice to discuss and compile a list of mounts out there that work and don't work. I myself get a bit too obsessed with mounting my gadgets. I really have no reason to need my tablet while driving, but that doesn't mean I don't want it there. I do however need it at work to be open and ready. Alot of available contraptions are a "One Size Fits Many" so you may know of something that works for someone’s iPad or Galaxy Tab that may work here. You don't have to have owned it, if you found something post it up, someone else may buy it and give it a whirl or have had it in the past.
Car Mounts
• Cup Holder Tablet + Phone Mount $50
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This one has decent reviews. The only complaint I see is that it doesn't hold the tablet perfectly still, but keep in mind your mounting a 10" tablet in a car, and in this case via the cup holder. It's not a RAM mount, but it's also a fraction of the price and doesn't require extensive installation. This one is a likely candidate to be ordered and tested out. I like that it gives a spot to place your phone or other stuff such as change or chargers. Speaking of which, it looks like you would have no issue plugging the charging cable in if you were using an inverter or found a car charger that worked.
• Arkon Seat / Floor Mount for Most Tablets $40
This one seems very low profile, very non-intrusive. It includes an 18" flexible arm and a mount that claims to hold 7"-12" tablets. It is important to note that Amazon has something like this listed (see below) that turned out to be total garbage. Hoping this isn't just a rebranded product since it is twice the price.
*Update* Found it on Amazon and it has 4/5 stars with 27 reviews. Pretty good. Havnt read through reviews yet though. Oh and it's cheaper!
]
• Arkon Windshield Mount $26.30 These mounts on extension arms tend to experience alot of bounce while driving, however I have experienced great results by using one of the dashboard beanbag GPS/Phone holders to rest the tablet on which results in a wonderfully stable position.
•RAM Mount Large Tablet Mount If you have your wallet ready and you just want a solid dependable mount without trying a bunch of different products, then RAM Mount is for you. Their X Grip is getting pretty good reviews for holding all sorts of devices and they offer numerous mounting solutions. Expect to pay $100+ for the full setup.
• Pro-Clip $50 + Vehicle Mount
I'm a big fan of ProClip mounts, howver I think they are over priced on some models. I have written How To articles on making your own ProClip type mounts elsewhere on XDA if anyone is interested. But they are very solid mounts and well worth it if you can justify the cash. You buy two halves. One for your phone, one for your vehicle. The positive side is if you get a new phone, youy buy just half the mount costing you roughly $30-$50 or if you get a new vehicle or want to mount it in a new location you buy that piece. I have found that it's quite easy to retrofit the phone half to a generic or home made car half. They offer a variety of mounting options. The only one they have is for the TF100 but it may work as there seems to be a little bit of a gap in the back.
• Goosneck Seat bolt mount on Amazon $20-$25 This one I originally bought and it was garbage. It wobbled very badly and not at the bolt point, but th play in the mount. Add to that the actual tablet mount was too small and would fit my Nook Color at best, and my TF700 wasnt even close to fitting. Stay Away!
Desk Stands
•Cyber Acoustics Universal Tablet Stand (IS-4000) $28.39 I like how this one lifts the tablet up a little leaving room to place your phone or other items below it while providing a nice large strurdy base.
• Rocketfish Tablet Stand $10 At only ten bucks, this is a steal. Rocketfish has a reputation of being pretty damn good at an affordable price. Not the best, but not expensive either. It has a hole in the base to allow charging cable.
•CaseCrown Wood Stand (Redwood) Simple but different tablet stand. Will not allow for horizontal charging (unless upside down, but it does stand out of the crowd by being a nice looking wood design with groves to adjust the angle. And hell it's only $10, that's cheap for anything other then plastic.
• Arkon Portable Fold-Up Stand $10 This stand comes recommended by fellow users who say its a great little fold up stand and it can be had on eBay for about half the Amazon price.
Desktop Docks
Note: As it stands right now, the TF-201 and TF700 Keyboard docks from Asus seem to be identical despite claims of incompatibility. A big thanks to CraftyHack for being suspicious enough to start tearing his toys apart.
• TF201 Keyboard Dock Amethyst Gray $125 These are all over the board in price right now. The plunged originally when Asus claimed they were incompatable, then shot back up when it was discovered to be the same damn thing with a different sticker. These KeyBoard docks are great value to those wanting more then a tablet but don't want a netbook. They pack an extra internal battery boosting runtime up substantially and offer SD card port and a few other features. Many report that they tend to be a little unstable when placed on your lap or other non flat hard surface.
•TF700 Keyboard Dock in Champagne $150 Reported to be the same as the TF201 dock, but matches the newly released Chambagne Infinity.
Other Contraptions
Empire Adjustable Flexible Arm Mount $40 This is something like I was looking for in order to "float" a tablet above my monitors at work. There are several of these of different designs on amazon. Will link a few and will try one out.
• Dockem: Wallmount for any device $15 This is a really cool idea, just two adhesive back brackets that you place on the wall to hold your device. Limited applications, but I think using to hold your tablet on the side of the bed side table to keep it safe and out of the way would be nice. Not for me, but could be useful for someone.
Hope This Helps
Helpful
Very helpul posted!
Haven't thought of it till I noticed this thread...
A mount for my truck would be nice.
Anyone know of a wifi camera that might connect to a tablet for rear view video?
Excellent post!
Thats OK said:
Haven't thought of it till I noticed this thread...
A mount for my truck would be nice.
Anyone know of a wifi camera that might connect to a tablet for rear view video?
Excellent post!
Click to expand...
Click to collapse
LOL, now that's thinking outside the box. You could always do a netbook under the seat. Hell why stop there, set up your own in-car wireless network, either by way of tether or broadcast hotspot. If you tether to PC you could use IP cameras! Yea I know overcomplicated but that's kinda why we're all here right?
But back to reality, a mount in your vehicle could be useful. One of my main reasons for exploring this option is because I no longer own a dedicated GPS. I use my phone for all my nav needs and on occasion you lose data signal at the worse possible time. With NavFree you have offline maps that will get you headed to where you need to be. Plus there's the option of catching up on news, listening to music and things like that especially if you find yourself sitting and waiting alot.
Chief Geek said:
LOL, now that's thinking outside the box. You could always do a netbook under the seat. Hell why stop there, set up your own in-car wireless network, either by way of tether or broadcast hotspot. If you tether to PC you could use IP cameras! Yea I know overcomplicated but that's kinda why we're all here right?
But back to reality, a mount in your vehicle could be useful. One of my main reasons for exploring this option is because I no longer own a dedicated GPS. I use my phone for all my nav needs and on occasion you lose data signal at the worse possible time. With NavFree you have offline maps that will get you headed to where you need to be. Plus there's the option of catching up on news, listening to music and things like that especially if you find yourself sitting and waiting a lot.
Click to expand...
Click to collapse
Heehee...
NavFree 'eh?
That's one we could use.
Wish RAM or Proclip made a fitted tablet mount for the vehicles.
I had one in the towtruck I was driving for the GPS and hand radios.
It snapped in right across where the radio was and I could tilt it toward me.
Popped it right outta there when I quit driving for AAA.
Looks like RAM makes a mount for tabs and laptops...not cheap however and the no-drill set-up takes a little vehicle dis-assembly.
I have the RAM iPhone mount for the truck, but the iPhone is a pain in rear to use or see while driving.
So I don't use it.
Thats OK said:
Heehee...
NavFree 'eh?
That's one we could use.
Wish RAM or Proclip made a fitted tablet mount for the vehicles.
I had one in the towtruck I was driving for the GPS and hand radios.
It snapped in right across where the radio was and I could tilt it toward me.
Popped it right outta there when I quit driving for AAA.
Looks like RAM makes a mount for tabs and laptops...not cheap however and the no-drill set-up takes a little vehicle dis-assembly.
I have the RAM iPhone mount for the truck, but the iPhone is a pain in rear to use or see while driving.
So I don't use it.
Click to expand...
Click to collapse
If you own a heat gun and some very basic tools then just make your own. It's not as pretty, but it's damn near as functional as a ProClip. I did a write up How To on the note forum. I didn't update it with the final product because there was very little interest in making your own 100 car mount for $10. I still use it everyday and have yet to have any problems, even made a few for friends since then.
Ah-ha a DIYguy!
Them heater guns are very handy...
Yer right maybe I could whip sumpthin up!
Not like I'm real busy these days.
http://forum.xda-developers.com/showthread.php?t=1569099
Its nice cause if you mess up the holster you reheat and try again. Kydex is cheap and very forgiving, just dont cut it too small.
don't forget the Asus Audio and Connect Docks, which are still just vaporware mostly, but presumably en route.
http://www.slashgear.com/asus-audio-dock-hands-on-with-transformer-prime-06232637/
doody.
I thought this adjustable angle stand was a great deal for $4. http://www.ebay.com/itm/Brand-new-P...1309123349443426966&pid=100011&prg=1005&rk=4&
Chief Geek said:
http://forum.xda-developers.com/showthread.php?t=1569099
Its nice cause if you mess up the holster you reheat and try again. Kydex is cheap and very forgiving, just don't cut it too small.
Click to expand...
Click to collapse
Groovy and excellent how to!
If the Kydex material is springy yet stiff enough I'm thinking it may just work to span the radio\stereo panel.
I can just plug the tabs headphone into the stereo's interface port for tunes.
The rest is just handled from the touch screen hmmmmmm...
Thats OK said:
Groovy and excellent how to!
If the Kydex material is springy yet stiff enough I'm thinking it may just work to span the radio\stereo panel.
I can just plug the tabs headphone into the stereo's interface port for tunes.
The rest is just handled from the touch screen hmmmmmm...
Click to expand...
Click to collapse
Yea thats sort of what I did. I listen to slacker radio every morning on my drive to work. I can review email and FB when I'm sitting at lights. It's great. Plan to do the same for my tablet. Keep in mind you have to get the right thickness of Kydex, which is available on ebay, its discussed in the thread. Kydex is what many "plastic" holsters are made of, its very resiliant stuff and tough as nails.
MrDoody said:
don't forget the Asus Audio and Connect Docks, which are still just vaporware mostly, but presumably en route.
http://www.slashgear.com/asus-audio-dock-hands-on-with-transformer-prime-06232637/
doody.
Click to expand...
Click to collapse
I'll add them once they officially announce them and put a MSRP on it. I love the looks of them and will probably buy one, but they are dragging their feet. These were released for "hands on" then they went silent. I really would like one, but c'mon asus.
Syn010 said:
I thought this adjustable angle stand was a great deal for $4. http://www.ebay.com/itm/Brand-new-P...1309123349443426966&pid=100011&prg=1005&rk=4&
Click to expand...
Click to collapse
Thats for an auction.
Chief Geek said:
Thats for an auction.
Click to expand...
Click to collapse
With very little monitoring of ebay sales for the item you can get one for $4 free shipping easily at auction.
Or you can buy it outright for $7 with free shipping eg:http://www.ebay.com/itm/Portable-Fo...?pt=US_Tablet_Accessories&hash=item3a76c9715f
I've seen it on amazon too for a few dollars more.
Either way its a great stand because you can adjust its angles, and it folds up nicely.
Syn010 said:
I thought this adjustable angle stand was a great deal for $4. http://www.ebay.com/itm/Brand-new-P...1309123349443426966&pid=100011&prg=1005&rk=4&
Click to expand...
Click to collapse
This is a great stand, I got it on Amazon for $9.35 with free prime shipping. I never use it though because my tablets are usually in a case... great stand though. Lots of angle options and its built like a tank.
Syn010 said:
With very little monitoring of ebay sales for the item you can get one for $4 free shipping easily at auction.
Or you can buy it outright for $7 with free shipping eg:http://www.ebay.com/itm/Portable-Fo...?pt=US_Tablet_Accessories&hash=item3a76c9715f
I've seen it on amazon too for a few dollars more.
Either way its a great stand because you can adjust its angles, and it folds up nicely.
Click to expand...
Click to collapse
AspenMan said:
This is a great stand, I got it on Amazon for $9.35 with free prime shipping. I never use it though because my tablets are usually in a case... great stand though. Lots of angle options and its built like a tank.
Click to expand...
Click to collapse
I usually try to link Amazon as they tend to stay up for awhile where as, with some exceptions, most ebay items are gone in 7-10 days. I'll post the amazon link to it. Thanks for the suggestions guys.
Here's a great car mount by Akron, available on Amazon for $26.33. Bolts right to the seat bolt on the floor. REALLY easy to install. This is the 2nd mount shown in the OP.
To use it like I have it pictured below with the tablet in a case you have to open the clamps really wide and the springs sometimes get pulled of their anchors inside the mount. Simple fix is to take it apart (simple screws) and epoxy the ends of the springs to their plastic mounts. I also stretched out the springs a bit as to not be so tense. The whole fix took 5 minutes.
Other than the initial spring issue it's a very sturdy mount and unlike window mounts, it's not going anywhere. When I used it with my tablet without a case on the springs weren't an issue. The goose-neck does sway a bit while driving and isn't perfectly rigid. This is good because when you hit a big bump or for whatever reason the car is jostled it allows a bit of movement, much easier on the attachment point and tablet.
AspenMan said:
UPDATE: Just noticed you updated the OP with this mount.
Click to expand...
Click to collapse
Been there the whole time, but glad to find someone who has had this one as I'm still flip flopping between what to get. I plan to gt the gum drop case when its released, do you think this mount will be big enough for something like that?
Chief Geek said:
Been there the whole time,
Click to expand...
Click to collapse
Der... lol, my bad.
Chief Geek said:
but glad to find someone who has had this one as I'm still flip flopping between what to get. I plan to gt the gum drop case when its released, do you think this mount will be big enough for something like that?
Click to expand...
Click to collapse
It should fit, but you'll have to fix the springs (or maybe that was just a fluke issue with my mount). It fit's my Xoom with it's Otterbox defender case on if that helps give you reference.

Cheaper solution to OEM phone mount that works!

If anyone is looking to buy a phone mount for his/her car but doesn't want to spend over $50 buying the OEM one for the Motorola Photon 4G LTE. Here is a solution.
http://www.ebay.com/itm/MACALLY-mGR...941219?pt=PDA_Accessories&hash=item43b3f44de3
It is the mGRIP 2 phone mount. I've been using it in my 2010 Toyota Prius and it works flawless..
Suction is great, rarely any vibrations. Can look at gps without having to focus on it due to road bumps.
Adjustments are great, arm, pivot and grip adjustments.
Allows use for all features EXCEPT microSD card slot when using.
I was looking for a phone mount for my Photon 4G LTE for awhile and if your still wondering what it is a good choice, this is one. It will not block charger port (important for gps, since it eats battery), or HDMI port. Nor the vol + and - buttons. Just put the charger in first then mount the phone so the grip come as close to the micro usb as possible, and thats your adjustment (for the grips atleast, you'll have to adjust the arm and pivot still lol). Been using it for a week and so far so good. Sturdy feel the adjustment arms are great for loading and unloading phone. Just a tip for those looking for those to buy a windshield mount other then the official moto one.. I couldn't decide between windshield or vent mount but couldn't be happier with this option. I bought this from the exact link above.
PS - If you buy, make sure you read the tiny instruction so you won't end up breaking your mount. I haven't broke it, I just feel I would have if I didn't read it lol. (The suction has a lever to it to lock on to windshield which works really well).
I used to use a setup like this on my old phone (XT603 Admiral). If you REALLY want to be trick with it, stick an NFC tag on the mount and setup task to put the phone into car mode automatically.
I personally got a Motorola car dock for $30 shipped on eBay, so just keep looking out on Amazon and eBay for these.
I'm a huge fan of the Exomount. It has the greatest suction cup that I've ever seen: http ://www .exogear.com/products-exomount2-car-mount-holder.html
You can get it for $25 off of Amazon.

Categories

Resources