Since some time I have this problem that when I turn on the Pro I have to 'unlock' the device. At the bottom on the left you tab the screen to unlock and next you tab the rightside of the screen somewhere half way and than it should 'unlock'. But it seems that my screen is not aligned and when I touch the right side I can see the screen 'light up' on the left side.
After unlocking using the keyboard I can touch the right side eg the 'X' to close the phone but instead I get the start menu. If I touch the 3 on the phones softkeys I get a 1.
Any idea is welcome.
hard reset, so you can align the screen at the beginning...
or use your keyboard to navigate to start->settings->system tab->screen and run "align screen"
my 8525 keeps constantly unaligning
and the fact the touch pro might not come to att for a while cause i already have the white screen problem and now this
lbhocky19 said:
my 8525 keeps constantly unaligning
and the fact the touch pro might not come to att for a while cause i already have the white screen problem and now this
Click to expand...
Click to collapse
The 8525 (aka hermes) has been known since first release that some device will have screen alignment problems, I personally sent my TyTN back to HTc europe a few weeks after i got it (August 2006) and the screen alignment issue was fixed, something to do with gaskets around the touch screen expanding??
Ive sent my Raphael back after 20 days because the LED behind the "Send" key stopped working, but im getting my replacement back some time this week.
There are ALWAYS problems with HTC devices but that doesnt make me love them any less
Advice to the OP: if the device isnt working correctly get it RMA-ed for a replacement/repair, these are expensive devices and you shouldnt settle for anything faulty
I'm having the same problem as mrvanx
i've been digging in the registry and found
HKEY_LOCAL_MACHINE / HARDWARE / Touch / calibrationdata with a numerical value
is this where the screen cailbration data is stored and has someone looked at this? Kinda n00b with this and could'nt find anything related to this on the forum. Could use some help, cuz this constant un-alignment thing is driving me nuts.
Maybe someone knows a base value that's close to perfect alignment, if there is such a thing?
thanx
Hello everybody.
My Touch Pro got a bad touchscreen, the center part is dead.
So when I want to allign my screen, I can't get past the center cross.
I can allign my screen but then I have to tap all crosses slightly on the right.
But now everything is missalligned.
So could someone post me his/hers CalibrationData from the registry?
It needs to be from a Touch Pro/Raphael..!
It located at: HKLM/HARDWARE/DEVICEMAP/TOUCH/CalibrationData
It would really help me out!
Thanks..
rebtel said:
Hello everybody.
My Touch Pro got a bad touchscreen, the center part is dead.
So when I want to allign my screen, I can't get past the center cross.
I can allign my screen but then I have to tap all crosses slightly on the right.
But now everything is missalligned.
So could someone post me his/hers CalibrationData from the registry?
It needs to be from a Touch Pro/Raphael..!
It located at: HKLM/HARDWARE/DEVICEMAP/TOUCH/CalibrationData
It would really help me out!
Thanks..
Click to expand...
Click to collapse
Maybe it helps
Here the data from my Touch Pro
"484,499 789,175 790,815 185,818 186,174"
theclueless said:
hard reset, so you can align the screen at the beginning...
or use your keyboard to navigate to start->settings->system tab->screen and run "align screen"
Click to expand...
Click to collapse
I had the same problem. Where-ever I touched the screen, only the left side of the phone highlighted.
After the re-alignment, it worked !!
Bad thing : I have to do it every 2 days :-(
And yes : I'm using my phone A LOT !!!! (It's just a part of me (Am I becoming nuts ?))
Screen alignment problem correlated to high temperatures?
Hi guys,
Since a week I've had problems with my screen alignment all the time. Sometimes the touchscreen worked fine, sometimes it was completely off. Re-aligning it in settings worked most of the time. Soft resetting worked too sometimes.
But today the problem just went away. I started thinking and came up with the idea that sunny weather and high temperature may induce this problem, since the problem started when it was great weather here. And it magically went away today, which is a rainy day (with moderate temperature 15-20 C).
Could any of you confirm this? Are you living in a warm environment? Does the problem go away when in an airconditioned space? (Mine did)
Rahza
Rahza said:
But today the problem just went away.
Click to expand...
Click to collapse
you phone case, does is have magnet lid?
I have my tp for les than 4 months. I realized that the super option of automatic wake up device after removing stylus doesn't work. I hardly remeber if this worked before i realised that problem. I know that there is a thread about making this stuff working again but that does't sole my problem. I can't repair it and I'm thinking of sending it to orange to repair that. And one more thing in my tp the funkcion button semm to be badly situated in the hone. Explenation. When the backlight turns on under my buttons the light is sparkling through the botoom off my tp. My brother tp doesn't have that problem.
the explanation i showed in the picture because problem is hard to describe.
The question is can this pb be solved under warranty??
sorry for bad english.
for the warranty it should cover it, i dont seem the reason why not, as long as u have the receipt youre fine cuz thats a tad strange, it seemed like u have a bad one
Ok so I decided
Ok so I decided to send it back to orange. The problem is how to describe the problem of the stylo and the buttons highlight? I have to describe it in some way so that those guys working in orange knew what to repair... Any advice how to write the explanation of the problem?
Hi all,
I have searched several forums but haven't found a simular problem. I hope someone here can help me. After using the tablet a few months the screen went crazy. I have updated to the last fimware and eveything works fine. The only problem is the sceen. The pad starts up as normal but the colour is mostly green. I have tried to reset it but nothing seems to work to fix the problem. I have bought during my trip in Thailand last year so I can't send it back to the seller.
I have attached a picture to show the problem. Can someone help?
Hello...I'm really not sure where to post this question so, if I'm in the wrong place I apologize! Anyway, I have a Samsung Transform that the touch screen completely stopped working on and I cannot figure out what to do with it. The qwerty keypad works and allows me to partially get to things but, like I said the touch screen does not work at all (including the menu button, home button, etc). The screen is in great shape cosmetically and the phone has only been used a few months. The only questionable thing that has ever happened to the phone was that my baby got a hold of it about a month ago and got a little bit of saliva in the back. I took the battery out and thoroughly dried it and it has worked fine since so I don't think that's an issue). If anyone can steer me in the right direction or knows how to repair this issue please let me know (private message is fine too!). Thanks!
sstuart said:
Hello...I'm really not sure where to post this question so, if I'm in the wrong place I apologize! Anyway, I have a Samsung Transform that the touch screen completely stopped working on and I cannot figure out what to do with it. The qwerty keypad works and allows me to partially get to things but, like I said the touch screen does not work at all (including the menu button, home button, etc). The screen is in great shape cosmetically and the phone has only been used a few months. The only questionable thing that has ever happened to the phone was that my baby got a hold of it about a month ago and got a little bit of saliva in the back. I took the battery out and thoroughly dried it and it has worked fine since so I don't think that's an issue). If anyone can steer me in the right direction or knows how to repair this issue please let me know (private message is fine too!). Thanks!
Click to expand...
Click to collapse
Could possibly be a software issue, but it sounds to me like the digitiser. It's an overlay for your screen that registers the presses. You can get replacements, and it's not uncommon for them to just stop working randomly. It may be as simple as opening your phone and reconnecting the digitiser cable (or even giving the plug a wiggle), but this will void your warranty if you have one.
Good luck!
Hello, two days ago i bought factory new Sony z3 and i have problem with touchscreen. Sorry for my english, but ill try to explain as best as i can what is going on.
1 out of 10 tap on screen does nothing. For example im reading this forum and im sliding my thumb on touchscreen to put page higher and suddenly i can ride all over the screen and nothing happen till i remove the finger and put it back again. It happens everywhere on everypage or even facebook. I have made Service Test with Touchscreen but havent found any issue. Hope you know the reason. Best Regards