Database Info

Possibly water damaged Captivate half-working

I may have possibly water damaged my Captivate last night. It was in my pocket when water spilled on my lap, and I didn't immediately take it out. Very stupid of me. The USB port was open so I'm thinking liquid may have gotten into there... Also, there were water beads on the inside of the camera lens.
My recourse was to take it apart and try to let it dry out. Initially it wouldn't do anything upon being plugged in to the charger, so naturally I thought it was bricked. I've let it sit all day on a dry window sill next to the radiator. After putting the battery back in and plugging it in a little bit ago, the phone surprisingly booted up. Here's where I'm at now:
The phone boots normally, however if I plug it in to the charger I get an error stating Battery Temperature too high or something, so charging is paused. Does anybody know what this indicates?
Secondly, after being on for a minute or so, the screen gets screwy. Dark transparent overlays start flashing over everything and it gets unresponsive... I haven't left it on like this long b/c I was afraid something worse would happen - I usually rip the battery out of the back to shut it off.
My phones currently pulled apart and drying in the window sill. Whatever water got on/in it is not visibly there, however I understand some parts might still be wet.
Any advice? Also, I believe the water indicator on the battery and near the pins where the battery dock in the phone are both fine. They're white squares and haven't changed color. Any chance there are other indicators?
The phone isn't insured and I bought it back in August. Would warranty possibly cover this or will they know about the water damage?

jmusso said:
I may have possibly water damaged my Captivate last night. It was in my pocket when water spilled on my lap, and I didn't immediately take it out. Very stupid of me. The USB port was open so I'm thinking liquid may have gotten into there... Also, there were water beads on the inside of the camera lens.
My recourse was to take it apart and try to let it dry out. Initially it wouldn't do anything upon being plugged in to the charger, so naturally I thought it was bricked. I've let it sit all day on a dry window sill next to the radiator. After putting the battery back in and plugging it in a little bit ago, the phone surprisingly booted up. Here's where I'm at now:
The phone boots normally, however if I plug it in to the charger I get an error stating Battery Temperature too high or something, so charging is paused. Does anybody know what this indicates?
Secondly, after being on for a minute or so, the screen gets screwy. Dark transparent overlays start flashing over everything and it gets unresponsive... I haven't left it on like this long b/c I was afraid something worse would happen - I usually rip the battery out of the back to shut it off.
My phones currently pulled apart and drying in the window sill. Whatever water got on/in it is not visibly there, however I understand some parts might still be wet.
Any advice? Also, I believe the water indicator on the battery and near the pins where the battery dock in the phone are both fine. They're white squares and haven't changed color. Any chance there are other indicators?
The phone isn't insured and I bought it back in August. Would warranty possibly cover this or will they know about the water damage?
Click to expand...
Click to collapse
well you want to put in rice, so that the moisture is gone

rice it for sure. but warranty WILL not cover it UNLESS the tabs on the battery and phone are white (It might not have gotten wet if it was in your pocket)
if they are still white, or if your phone is white and battery red (then buy another battery) and get to the store and tell them you don't know what is wrong with it. The only indication that it is water damaged is if it is red and those tags are notoriously faulty so you could always argue your way through it if you have an account in good standing.
best of luck.
I know someone who "claimed' that insurance was supposed to be added to the phone when he got it and noticed that the person didn't do it properly (the guy was new so it helped his cause) and the manager of the cor store told him that they'd do a courtesy replacement and charged him the 125$ for a new device.
you could go that route should you need too...

I don't have access to rice at the moment... Would it do any good even if I absolutely can see no water anywhere in/on the phone?
Am I doing my phone any harm/potential harm by trying to turn it on every once in a while, or should I just let it be for a few days?

Take the phone apart and focus the strongest fan you have on it over night. It's probably best to not turn it on for awhile. Maybe if you focus a blow drier on it for perhaps several hours, air will find flow through the small openings within the case.
You may not be able to dry some parts of it unless you do a complete dismantle, but that may require special tools
Consider shipping it to get repaired only as a last resort, as I've read some bad reports about that.

Rice or some other dessicant is the way to go - it will pull moisture out. Also, turning it on (even putting the battery in) is bad - you are powering circuits and possibly creating shorts where water is present. You may have already done permanent damage.
If you get electronics wet, the best course of action is to remove the battery and put it in a bag of rice for a few days.

Now that You have the phone apart get an alcohol pad and gentley scrub the main board. Sometimes when liquid touches the main board you will get a white looking residue. If you see anything like that simply wipe it off. I dropped my phone into a trash can at a very popular teriyaki restaurant here in Las Vegas my phone was submerged into a deep bath of teriyaki sauce. I quickly pulled the phone from the can and wiped it down vigorously. I was excited to see that it was initially working unfortunately this was not the case by the time I got home. The phone would not turn on for a whole week, until I decided that I was going to open her up. I found a tutorial on line describing a complete break down of the captivate. Upon opening it I found I was able to see exactly where the teriyaki had interacted with the electronics due to the remnants of an oxidized white film that was present on various parts of the main board. I grabbed a alcohol pad out of my first aid kit and began wiping it down to remove all of the white stuff,put the phone back together and to my surprise it turned on. Hope this helps!

Thanks for the info guys.
How would I go about getting to the "main board"? Taking out the battery and looking inside it only reveals where the battery connects, where the SD card and sim cards can go... I'm assuming if I remove the little screws around that fixture I can get to the "main board"?
I think I can see some minor corrosion around where the sim card connects, but I think I *should* be able to clean that with some alcohol.
The phone seems to be working fine (I've yet to put my SIM back in it, though, so no idea if the corrosion around there is affecting it at all). I just booted it up and was able to get on the web (wifi), run apps, everything just fine. Didn't get the flashy screens I mentioned earlier. However, if I plug in the USB charger, it still gives me the temperature error. I didn't keep it plugged in, however it did make me realize something:
The errors I was getting before, where the screen went all wacky, only happened if the phone was plugged in to the wall. Is it possible my battery is busted, or do you think the USB charger is busted? Remember that port was open when it happened.
Any thoughts? New battery? Or do you think I won't be able to charge the phone via USB charger any more?

jmusso said:
I don't have access to rice at the moment... Would it do any good even if I absolutely can see no water anywhere in/on the phone?
Am I doing my phone any harm/potential harm by trying to turn it on every once in a while, or should I just let it be for a few days?
Click to expand...
Click to collapse
yes you are, because if there is water or moisture internal, it can short circuit, also rice will help dry up the phone completely

jmusso said:
Thanks for the info guys.
How would I go about getting to the "main board"? Taking out the battery and looking inside it only reveals where the battery connects, where the SD card and sim cards can go... I'm assuming if I remove the little screws around that fixture I can get to the "main board"?
I think I can see some minor corrosion around where the sim card connects, but I think I *should* be able to clean that with some alcohol.
The phone seems to be working fine (I've yet to put my SIM back in it, though, so no idea if the corrosion around there is affecting it at all). I just booted it up and was able to get on the web (wifi), run apps, everything just fine. Didn't get the flashy screens I mentioned earlier. However, if I plug in the USB charger, it still gives me the temperature error. I didn't keep it plugged in, however it did make me realize something:
The errors I was getting before, where the screen went all wacky, only happened if the phone was plugged in to the wall. Is it possible my battery is busted, or do you think the USB charger is busted? Remember that port was open when it happened.
Any thoughts? New battery? Or do you think I won't be able to charge the phone via USB charger any more?
Click to expand...
Click to collapse
If you've never taken apart a smart phone before, and reading your first question, I'm going to assume that's the case, then I strongly advise you not attempt it unless you are willing to either A) buy a replacement after you break it or B) invest time/money into repairing mistakes you've made. This phone is not as difficult to disassemble as some, but I wouldn't want to break that $150 amoled screen.
No, removing the screws will not simply get you to the mainboard. It's more complicated and nuanced than that.

I'm a new user so I can't post the link but if you google Tech Republic Captivate tear down [/B]there is a website that will show you step by step how take the phone apart. There are two screws under the clip you pull down to take the back cover off. Be careful when pulling it back to expose the screws. I tugged on it pretty hard with no problems, but I imagine it could be broken if you pull too hard. Good Luck! It's actually really easy to take apart and the various ribbon connectors on the main board are really easy to unplug and plug back in after cleaning it.

So what do you guys think I should do if I'm still getting the battery error with the thermometer and yellow caution sign? Buy a new battery? Or do you think its the USB jack? Has anybody seen this before - the battery was working fine as long as it was not charging.
I'm trying to decide between a) buying a new battery, or b) buying a wall-mounted battery charger since the USB won't charge the phone.
Anybody have any experience?

Meguro2006 said:
I'm a new user so I can't post the link but if you google Tech Republic Captivate tear down [/B]there is a website that will show you step by step how take the phone apart. There are two screws under the clip you pull down to take the back cover off. Be careful when pulling it back to expose the screws. I tugged on it pretty hard with no problems, but I imagine it could be broken if you pull too hard. Good Luck! It's actually really easy to take apart and the various ribbon connectors on the main board are really easy to unplug and plug back in after cleaning it.
Click to expand...
Click to collapse
I think you need to be careful about who you encourage to dissect their device. This guy asked how to get to the mainboard. Clearly, he hasn't opened a smart phone before. Telling him it's "actually really easy" is disingenuous at best. Performing smart phone repairs properly requires experience. I'm certainly not suggesting that noobs not try to fix their phones, only that they are made fully aware of the risks.

My Captivate was fully submerged in dirty water. I followed some instructions online and it's been working fine for over a month now. If your water-detection stickers are already red anyway, and rice isn't working, I recommend it:
1) Remove battery, SIM card, SD card
2) Submerge in a bowl of distilled water and gently agitate. This helps clean the insides. Distilled water (not spring water) does not conduct electricity.
3) Next, submerge in a bowl of high-quality rubbing alcohol (~95% pure) and gently agitate. Rubbing alcohol displaces water, removes corrosion, and evaporates quickly. (It's also flammable, so have good ventilation and no open flames nearby)
4) Leave it out to dry for two days or until it no longer smells of alcohol.
BTW I wouldn't dry it too close to a radiator, the heat may damage it.

jatkins09 said:
If you've never taken apart a smart phone before, and reading your first question, I'm going to assume that's the case, then I strongly advise you not attempt it unless you are willing to either A) buy a replacement after you break it or B) invest time/money into repairing mistakes you've made. This phone is not as difficult to disassemble as some, but I wouldn't want to break that $150 amoled screen.
No, removing the screws will not simply get you to the mainboard. It's more complicated and nuanced than that.
Click to expand...
Click to collapse
Not really. Once the screws are removed..including the two hidden by the battery cover lock slider...you can carefully pry the cover apart using your fingernail to get to the the internals. I have done it several times and am no expert by any means. Just don't yank like you are opening a present on Christmas morning.
Although I am mystified by the op stating they have no access to rice?! That should always be the second thing one does after a moisture incident...right after pulling the battery and sim. I guess in this case a trip to the store with a couple bucks may have pushed that to step three though..
sent from my captivate disguised as an i9000 running cyanogen

[Q] Spilled water on phone. Now "Unable to start wifi" message

Guys, been hanging out here long time now. First incident with about 6 month old captivate. I dropped a glass of water on my captivate yesterday. I immediately removed and took out the battery and wiped it dry. Did not see much of seeped in water so did not do the rice method. Turned on Wi-fi this morning and it says "unable to start wifi". Same with bluetooth.
Call,sms, camera everything works fine. At work, so blew dry the phone and also have kept it next to a warm laptop exhaust. Should I dismantle the phone and try to dry the swb23 chip (wifi/bt) ?
Please help guys !
stock and unrooted captivate

thelastjedi said:
Guys, been hanging out here long time now. First incident with about 6 month old captivate. I dropped a glass of water on my captivate yesterday. I immediately removed and took out the battery and wiped it dry. Did not see much of seeped in water so did not do the rice method. Turned on Wi-fi this morning and it says "unable to start wifi". Same with bluetooth.
Call,sms, camera everything works fine. At work, so blew dry the phone and also have kept it next to a warm laptop exhaust. Should I dismantle the phone and try to dry the swb23 chip (wifi/bt) ?
Please help guys !
stock and unrooted captivate
Click to expand...
Click to collapse
You can't see the water that got inside. Would have been better to do the rice method before switching it back on but you should do it now nonetheless. Just be warned, you may have cooked the WiFi chip already.
Are the moisture indicators clear? If so, you should send it for warranty replacement. If not, then you can resort to opening it up, wiping the traces, etc.

ianwood said:
You can't see the water that got inside. Would have been better to do the rice method before switching it back on but you should do it now nonetheless. Just be warned, you may have cooked the WiFi chip already.
Click to expand...
Click to collapse
Yeah, pretty much ^^

uggg...may be too late. If you get a significant amount of liquid on or in your phone the worst thing you can do is turn it on.
You should have:
1. immediately removed battery and placed on a paper towel.
2. immediately place phone in a bag of rice for a minimum 24 hours if not 48 before ever powering back on.
Still its worth a try....remove battery and leave in rice for 24 hours....try again....maybe it didn't fry anything when you powered it on...but you definitely need to finish getting the moisture out of the inside via the rice absorption.
I had my old tilt in a pocket submerged in a swimming pool for a good 15 minutes before realizing my blunder. When i realizing it i didn't try to turn it back on. Left it in rice for 48 hours and everything work fine (luckily the phone was powered of when i got in the pool so that probably helped avoid anything frying).

Haha, I once accidently dropped my old Samsung Epix in a bucket of water and it still booted up and worked but most of the features are dead but screen and all still works. It looked like it was wrecked. I got it replaced under my insurance which is a good thing.

Lol.....Captain Hindsight......i love South Park.......
Sent from my pocket.

swedishcancerboi said:
Lol.....Captain Hindsight......i love South Park.......
Sent from my pocket.
Click to expand...
Click to collapse
funny
but being aware that you shouldn't turn on an electronic device when it is wet hardly requires hindsight though does it? =)

Thanks guys, I have put my phone in a bowl of rice hoping it will get cured.
If not, will ATT not service my phone under warranty ? I read somewhere that replacing the wifi/bt chip costs $70 with ATT. Has anyone done this here ?
Thanks all for your quick replies ! Much appreciated. I will keep everyone updated on how this issue pans out so it will help someone in the future

Tesist the urge to take out Nd test.....leave at least 24 hours without touching
Sent from my SAMSUNG-SGH-I897 using XDA App

ianwood said:
Are the moisture indicators clear? If so, you should send it for warranty replacement. If not, then you can resort to opening it up, wiping the traces, etc.
Click to expand...
Click to collapse
How do I check for the moisture indicator ? Any easy steps ?

It is the white (or not so white anymore) square in the battery compartment.

bames said:
funny
but being aware that you shouldn't turn on an electronic device when it is wet hardly requires hindsight though does it? =)
Click to expand...
Click to collapse
I just felt like being ornery. I think i read a "you should have....." and it just got me laughing thinking of that episode. No disrespect intended towards anyone.

swedishcancerboi said:
I just felt like being ornery. I think i read a "you should have....." and it just got me laughing thinking of that episode. No disrespect intended towards anyone.
Click to expand...
Click to collapse
i know i thought it as funny haven't seen that episode in a long time...almost as good as towlie
i am just always surprised to see the posts where someone gets there phone wet (washed in laundry, dropped in toilet, spilled significant amount of liquid on it) and the first thing they did was tried to turn it back on almost immediately.

btw if your looking at the moisture indicators for warranty purposes its quite possible you have to completely open the shell. Usually they have one visible without taking the phone apart but its not uncommon to have a secondary marker inside the phone where it would be harder for someone to tamper with. Can anyone confirm where all the cappys markers are?

Been a while since I had mine apart but I don't recall seeing one inside.

newter55 said:
Been a while since I had mine apart but I don't recall seeing one inside.
Click to expand...
Click to collapse
wasn't sure....my Tilt2 had one in the battery compartment and one on the motherboard that could only be seen by opening the casing

[Q] A "washed" through laundry HTC Diamond

Hello,
by a rediculous accident I forgot my HTC Diamond in the pocket of my jeans when running the laundry :-(
Afterwards, I opened the cover, took out the battery and let the phone dry out for 2 days. Now I've put it back together, and connected it to the charger. The "ring" is flashing, so the battery is charging but the phone itself is not starting and the display remains completely black, not even the vibration kick on starting...
Is there anything I could do? Or perhaps there is a chance to get out some photos I have shot earlier, would also be something...

ive heard that taking apart your phone and leaving the parts in rice can help (because the rice absorbs moisture)

Off topic:
I read one Desire went through a washing sequence in a washing machine in Desire spesific forum and now this?
Is this a new hobby? I mean... washing smartphone

darkman088 said:
Or perhaps there is a chance to get out some photos I have shot earlier, would also be something...
Click to expand...
Click to collapse
If the photos are on your micro sd card, you may be able to plug that into an adapter and plug it into your PC and gain access to them that way. Just be sure that micro sd card is thoroughly dry before doing so.

WORKING !!!
Hello,
thanks for the replies... This morning the phone booted!!! I was able to download the photos!!! But the screen has stains, obviously the remaining water.
PLEASE advise on how to dry that thing completely !!!
I think that I'm gonna pass on the rice thing.
@aaa - YOU ARE A JUNKA$$ !!! You think that's really funny?!? Especially when I'm currently TIGHT on budget and need the money for other things and the next phone is planned no earlier than Christmas... I'm hesitating whether you're a real human being...

You can dry it completely in an oven for three hours at thirty degrees or so. I've done this three times. If you have a fan forced oven, just turn the fans on, that'll be enough.
A safer way (if you can obtain it) is to leave the phone for 24 hours in a bowl of dessicant silica gel. You'll often get a small packet of silica gel when buying new electronics or other moisture-affected things. That small packet is enough, just put it in an airtight bag and leave it for 24 hours.
The next step would be disassembly and a thorough swabbing with denatured alcohol, but that's pretty extreme and only needed when the device isn't booting.
Some LCDs are hard to get moisture out of, some are not. Leaving the phone with the silica gel for longer will have a better effect. As the previous poster mentioned, rice also works (quite well), but takes longer than silica.
Good luck with it!

Another thin that will absorb moisture is common table salt. Take the phone apart very carefully. Remove battery first, make sure you're grounded as well.

Hello everybody.
thanks a lot for the numerous advices...
Unfortunately, I have more to report...
The phone dried out and booted 2 or 3 days later, as I said. The stains on the display disappeared as by magic one day later.
Everything was fine for a week until I launched the camera 2 days ago. The backlight of the display went off and came back only after removing the batter for 15 minutes.
Now the backlight is going off pretty often, sometimes it requires to remove the battery 1-2 times before it starts working again and yesterday it happened that it got activated again when I got a call...
Any ideas please?

And also the phone keeps overheating from time to time without real load (GPS or wi-fi) which dries out the battery. But I had this problem also before the laundry

Sounds like that moisture in the LCD unit left a bit of residue and is shorting the backlight somewhere.
Only option there would be to disassemble and swab the LCD boards and cables/connectors with denatured alcohol.
Alternatively, a new LCD unit should fix the problem if it persists, just make sure you alcohol swab the connectors before plugging them back in
Someone also mentioned drying out in salt before. While that does work, salt is extremely corrosive on solder and SMCs, so I wouldn't recommend that route.

i heard hair dryers are the bomb at the screen moisture, just take off all that you can and blow dry it.

I just don't understand your refusal on using white rice. It have saved countless phones.
Uncooked white rice is VERY mosture negative. Just put layer of rice, put your phone on it, cover it completely with white rice, seal it in. Ziploc could work too.
In a day or two your partially dry phone will be bone-dry. If it was soaked still you could first try to shake out water as much as can, soak it in distilled water to remove minerals, then white rice it for 3 to 5 days.

I had this problem with my Touch Diamond. Everything worked, but while i was trying to dry it I broke one of the battery "hinges" but the phone still worked after except only with black screen. The best thing to do probably is just leave it for a couple of days and hopefully your phone will be back!

XXCoder said:
I just don't understand your refusal on using white rice. It have saved countless phones.
Uncooked white rice is VERY mosture negative. Just put layer of rice, put your phone on it, cover it completely with white rice, seal it in. Ziploc could work too.
In a day or two your partially dry phone will be bone-dry. If it was soaked still you could first try to shake out water as much as can, soak it in distilled water to remove minerals, then white rice it for 3 to 5 days.
Click to expand...
Click to collapse
exactly what ive said. ive read everywhere that rice is one of the best solutions out there

Like was said before you most likely have some corrosion on a few contacts, if you have about 6 bucks you can spare you can get residue free contact cleaner in an aerosol at radio shack or any electronics store and save yourself having to scrub each contact and connector. Just tear the phone down down spray all the contacts and connectors with contact cleaner let it sit for a few then spray it down with air duster to get any thats get under the resistors, in the connectors, etc that hasn't dried; let it sit till you're positive everythings dry and put it back together. Does the same thing as alcohol just alot less scrubbing.
Sent from my i897 w/Andromeda 3, Suckerpunch kernel, & 1.3Ghz OC using Tegrak.

Hello,
thanks for narrowing the problem down.
But for me it looks like something different, because:
1) I have been using the phone for 1 week without any problems and it got screwed after I've launched the camera app for the first time
2) The backlight works when I power on the phone. But its stop is event-triggered, like when I launch the sound or video player or when I get a call... Similar events would trigger the backlight back on.
Perhaps reflashing the software could fix that?
I went to a shop today and put another battery. The phone booted, anyway without any backlight, twice...
At least the device is still alive.

There probably was a tiny water bubble and it messed with phone when you turned camera on.

darkman088 said:
Hello,
thanks for narrowing the problem down.
But for me it looks like something different, because:
1) I have been using the phone for 1 week without any problems and it got screwed after I've launched the camera app for the first time
2) The backlight works when I power on the phone. But its stop is event-triggered, like when I launch the sound or video player or when I get a call... Similar events would trigger the backlight back on.
Perhaps reflashing the software could fix that?
I went to a shop today and put another battery. The phone booted, anyway without any backlight, twice...
At least the device is still alive.
Click to expand...
Click to collapse
remove the back cover and battery from the phone, and put everyting in a bowl of rice for a day,. should fix everything,

XXCoder said:
There probably was a tiny water bubble and it messed with phone when you turned camera on.
Click to expand...
Click to collapse
Either that or a short in the cameras circuit from corrosion, either way i'd pull it apart before it gets worse and check it out.
Sent from my i897 w/Andromeda 3, Suckerpunch kernel, & 1.3Ghz OC using Tegrak.

sidekick got wet

ok i got my phone wet what do i do i put it in the rice

I've heard that works, I don't know how long you keep it in there.
Take the battery out and do not try to turn it on or it will like short circuit or something like that.
/my little knowledge.

well i did turn it off and then back on

Put it in rice for a day or so.

will that fix the button issue

Most likely. The button problem is caused by water completing the circuit between the button and the point of contact, so putting your SK in the rice will almost certainly fix your problem (just be sure to be patient and wait a day or two).

worst comes to worst buy on on ebay for 75 bucks

thank you guys u made me feel so much better

well it didnt fix it

you gotta wait a few days man now its probably done-zo

what you mean

you have to let it sit in rice for a couple days, the water will cause corrosion and over time will mess up the circuits, rice will dry it out over the course of a few days then it would be fine but if you pump electric through it you can cause things to permanently be damaged

If you are some what mechanically inclined, you can disassemble your phone so it can completely dry. All you will need is a micro screw driver set (usually find at hardware or tool store) and youtube has a good collection of dis-assembly videos. The proper way to service a water damaged smart phone would be to disassemble and place in an ultrasonic cleaner with alcohol or other chemical to remove water. Might check your local area for a phone repair shop, they usually have all the tools to get your phone repaired correctly so you don't end up with a button that doesn't work or worst problems later on from corrosion. Hope this helps

im confussed

What blk2dr is saying is that over time, the water can cause damage to your phone (if it isn't dried quickly). He recommends that, if you think you are able, you should take your phone apart so that it can dry faster.
If you aren't confident in your ability to take your phone apart and put it back together, I recommend you just slide the screen up, take the battery cover off, remove the battery and SIM card (and microSD if you have one in there), and put it back in the rice.
How long did you keep your SK in the rice the first time?

over night i tired it when i woke up and it still didnt work

Perhaps there is some water left.Maybe it condensed. Try taking it apart and see if there are any drops left.Also don't get tempted to use a hair drier since it cpuld melt some circuits and wire connections.
Sent from my Optimus Me using xda premium

i think the phone is trashed the battery and the phones water thingy is red

listen, of course its red, but you needed to let it sit in the rice longer, its not going to dry out in 12 hours
its going to take days, and by trying it over and over youre just doing more damage

i will try it tomorrow morning

Water Damaged AT&T LG G2 D800

Hi guys. Today I made the mistake of dropping my AT&T LG G2 D800 into the toilet.
I promptly removed the phone from the toilet, it was submerged for about 2-3 seconds. The phone stayed on for a few seconds but then froze and powered off. I disassembled it as quickly as possible (accidentally cracking the back cover in the process), and put the disassembled pieces in a large container of rice.
I'm wondering if you guys have any suggestions, and was also wondering how the battery can be completely removed.
I've also taken a photo of what looks like some sort of corrosion/damage on the logic board - if it helps. Otherwise, I don't see anything that looks damaged electronically anywhere else on the phone.
Any ideas or assistance would be appreciated, thank you!

First off, I'm sorry to hear about your loss I once gave my sister her first smartphone and she dropped it in the toilet as well good thing it wasn't a G2. The battery is hard to remove due to its design. They utilized all the space they could, so you have to remove some parts from the phone to be able to pull out the battery. Keep it in rice for a few days, reassemble and try your luck. Put the rest of the device in rice too, to ensure that all water has been drained.
Sent from my LG-D802 using XDA Premium 4 mobile app

Dropped in a basin of water
It's my usual practice to bring with me my g2 in the bathroom. I dropped it, I dont know how, in a basin of water, a little fortunate than the toilet bowl. I was able to touch the screen coz I want to turn it off. But it just suddenly did not work. So, I gave up and left it in sunlight in the living room. The next day I tried to turn it on. Led turned on then dead again. I gave up again and just left it somewhere. After two days, I, out of habit, took it where I left it and turned it on. Viola! It turned on! What I did, I turned it off and charged it full. Now, to make sure, I put it inside our rice dispenser. I'll try to turn it on again tomorrow. Fingers crossed.

faithraze said:
It's my usual practice to bring with me my g2 in the bathroom. I dropped it, I dont know how, in a basin of water, a little fortunate than the toilet bowl. I was able to touch the screen coz I want to turn it off. But it just suddenly did not work. So, I gave up and left it in sunlight in the living room. The next day I tried to turn it on. Led turned on then dead again. I gave up again and just left it somewhere. After two days, I, out of habit, took it where I left it and turned it on. Viola! It turned on! What I did, I turned it off and charged it full. Now, to make sure, I put it inside our rice dispenser. I'll try to turn it on again tomorrow. Fingers crossed.
Click to expand...
Click to collapse
Your best bet friend, is or was to turn off immediately and tear it down pull battery and hit with a dry chem spray heavily. Well not too heavy but then after that hair dry. Rice works in time but not many people will tell you rice can leave a starch film inside of your internals leaving you in a bad way if ever it was heated to liquify the starch. It will coat the internals and youll never get it working again. Though rare. It happens. Try to get a can of water erase. Or canned evaporater. I use it on repairs and have had many positive outcomes. When pulling battery on the devices especially lg be careful of the older nexus 4 and older devices as their internal battery flex terminals with pull right out.
Anyway. Hope you get it working bro. Peace
Sent from my LG-D800 using XDA Free mobile app

Droid2drummer said:
Your best bet friend, is or was to turn off immediately and tear it down pull battery and hit with a dry chem spray heavily. Well not too heavy but then after that hair dry. Rice works in time but not many people will tell you rice can leave a starch film inside of your internals leaving you in a bad way if ever it was heated to liquify the starch. It will coat the internals and youll never get it working again. Though rare. It happens. Try to get a can of water erase. Or canned evaporater. I use it on repairs and have had many positive outcomes. When pulling battery on the devices especially lg be careful of the older nexus 4 and older devices as their internal battery flex terminals with pull right out.
Anyway. Hope you get it working bro. Peace
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
The thing is, d802's battery is not removable and I dont have the tools to remove the back cover. No service center here too. Luckily, my mighty G2 is working perfectly now.