it all started when i wanted to try the Stock Deodexed T959VUVKG4 with Root, and i went to the red recovery i had, voodo recovery, and i did all the unmount, mount, and all that good stuff.I flahsed the room waiting for the process to finish but i got stock on the galaxy logo. when i went back to the post, i read that recovery didnt work for some reason, so i decided it was time for me to restore my phone using odin, but my pc doesnt recognize my phone anymore, whenever i plug in the cable to the pc, its like nothing has happened, i have installed all of the usb drivers ive seen on the web, but nothing seems to work, any suggestions???/
Did you forget to disable voodoo in CWM and then reboot to un-convert the file system before you started flashing?
to get into download mode, are you sure you are holding both volume up/down buttons down while you plug in the usb?
the kg4 doesnt have the bootloaders, so you should be able to get into download mode using the three button combo.
i disabled voodo lagfix but i did not reboot the phone instead i flashed the room right after. and i am holding both volume up/down buttons down while i plug in the usb and i see the download pictures and everything
and what do i do if my pc doesnt recognize my phone???
djj.p said:
and what do i do if my pc doesnt recognize my phone???
Click to expand...
Click to collapse
I had an issue where my pc would not recognize my phone in download mode after flashing the original 2.3.4 posted by chadster. I finally got it to recognize it by installing all the drivers used with heimdell. Hope that helps.
Sent from my SGH-T959V using XDA Premium App
ive tried that but the only driver that my pc recognizes is my wireless driver.thanks for the help everybody.
ok. drivers are sometimes a problem. restart the computer and then reinstall the drivers. then plug your phone into a different usb port from what you had it and go into download mode. let me know if that works.
i will try again with Heimdall to see if it works
Can you try taking the battery out for 30secs open odin plug the usb in the phone hold vol up and down then slap the battery in while still holding keep holding it and if a com sign comes up in odin flash it even if screens blank
Sent from my SGH-T959V using XDA Premium App
it doesnt work
i still have the same problem with the usb drivers, does anybody know how to fix it?
Try uninstalling all your phone's usb drivers, then go to the device manager in system properties, right click on your USB controller, and uninstall the device. Then reboot your pc, and let windows find and reinstall the USB controller. Then reinstall the samsung usb drivers, and see if that works.
I had the same issue once.
I had the same issue before and was able to fix it by rebooting the phone and letting GB boot up. I then turned on debugging mode and plugged the phone into the pc. I then installed the hemi drivers and windows installed the device and everything worked after that. From what I've found, after you flash GB, sometimes it wont recognize the device anymore, so putting the phone into debug mode after booting seems to force it to use the correct drivers. Hope this helps!
I'd try the fevers then hold up and down and put USB cord in
Sent from my SGH-T959V using XDA App
Related
I was doing odin to get to download mode and trying odin gb bootloaders for 2.3.3. Now my phone doesnt boot i have a black screen picture of a phone triangle and computer. What did i do and how can i get out of this? Please need help. Im not even rooted yet i was on eclair and 2.1update1 and did have recovery but update.zip sd file bad so i could never reinstall packages.
Which gb bootloaders were you trying to install the i9000 or the i897
Sent from my SAMSUNG-SGH-I897 using XDA App
i897 gb bootloader. is there hope? ive got black screen and pic of a white phone then an orange triangle! and white computer
cell2011 said:
i897 gb bootloader. is there hope? ive got black screen and pic of a white phone then an orange triangle! and white computer
Click to expand...
Click to collapse
If I'm not mistaken, the phone -!- PC screen is the equivalent of download mode. I'd unplug your phone, restart Odin, plug phone back in and go from there. I'll defer if someone has a more detailed explanation though
edtonn said:
If I'm not mistaken, the phone -!- PC screen is the equivalent of download mode. I'd unplug your phone, restart Odin, plug phone back in and go from there. I'll defer if someone has a more detailed explanation though
Click to expand...
Click to collapse
Your right, got that screen recently myself. Just do as he says and you will be fine.
im trying that just not working i tried took everything out the plug usb and open odin 3 and hold power and volume put in battery and let go of power and nothing?
cell2011 said:
im trying that just not working i tried took everything out the plug usb and open odin 3 and hold power and volume put in battery and let go of power and nothing?
Click to expand...
Click to collapse
leave the power button alone
power down
hold in volume buttons
insert USB
If you managed to get the GB bootloaders in place (assuming I9000), the download mode key combo is to hold Vol- and Power. If you're still on Eclair/Froyo bootloaders, hold Vol-/Vol+ (with power off), then insert the USB cable.
cell2011 said:
im trying that just not working i tried took everything out the plug usb and open odin 3 and hold power and volume put in battery and let go of power and nothing?
Click to expand...
Click to collapse
Unplug your phone, pull your battery for 2+ min. Then open Odin, plug in your USB, press and hold the vol up and vol down, while holding them down, put your battery in. You should see a big triangle with the Android guy . That is Download mode
which odin i have two 3 v1.85 happy flashing and 3v1.85 android+slp
Have odin opened remove battery, insert battery,hold vol+ and vol- , then insert usb . if odin recognizes the phone try flashing the bootloaders again
Sent from my SAMSUNG-SGH-I897 using XDA App
nothing im not sure at this point its like the usb doesnt even make a sound when i plug into computer
odin is not recognizing my phone
is there someone that would be willing to troubleshoot this for me over the phone or chat?
This is for sale if someone can fix this PM me. Does anyone have one for cheap i dont even care if it is cracked as long as its fully functional
Is the usb plugged into back of pc or port number 1 on laptop?
Sent from my SAMSUNG-SGH-I897 using XDA App
Reboot your computer
What OS are you running?
Let's run down a quick checklist of things to make sure that you're putting yourself in the best possible place for success:
1. Unplug any cables you have plugged in right now, Turn off ODIN, remove the battery, and reboot your computer.
2. Boot up your computer, let it fully boot and settle. Once it's fully settled, double-check to make sure you have the Samsung USB drivers installed for the Captivate (and that's its for the correct version of Windows - x86 or x64).
3. Assuming the drivers are present and correct, start up ODIN (You might try the One-Click to Stock, as it will take you back to a stock state). Let it sit for right now.
4. Plug your USB cable into a port that connects directly to the motherboard (but not to your phone just yet). On a desktop, it will be on the back of the machine. On a laptop, you may have to find it by trial and error.
5. Reinsert the battery. Hold Vol+/Vol-, and then insert your USB cable. This should put you in download mode. If not, pull the cable, remove the battery, reinsert the battery, and hold Vol- and power until download mode appears, then insert the USB cable.
6. Assuming you are in download mode, and the cable is inserted, check to see if ODIN recognized the phone. If not, try a different USB port on the computer. You may have to reboot your computer between trials.
7. If ODIN still won't recognize the phone, you may need to look into using Heimdall to flash.
Post back if you have questions.
I have to get a USB jig to get to download mode and special thanks to kangi26 for alll his help. And ty jmtheiss for the last post
cell2011 said:
i897 gb bootloader. is there hope? ive got black screen and pic of a white phone then an orange triangle! and white computer
Click to expand...
Click to collapse
I thought I remember seeing somewhere a ways back that from this alternate d/l screen Odin may not recognize the phone, but that flashing Odin package would work anyway.
Pretty sure I saw that...but at this point, can't hurt to try. Otherwise jig should get you there.
Sent from my SGH-I9000 using XDA App
Strange stuff happened. I got one of those stock XKPE roms ant after that my phone's debugging mode doesnt work. I check the check box but it doesnt have any affect. The worst thing i cant flash other firmware because COM port code doesnt apear in ODIN. Any suggestion how could i fix this?
not sure if this works but you can try remove/attach battery to force restart, or HOME + UP/DOWN vol + CONNECT USB Cable for the safe mode.
did you flash kpe twice before trying to use the phone?
and, usb debugging isn't necessary for odin, afaik. just go to download mode, which is (from phone off) press and hold vol down, press and hold home, press and hold the power button (vol down + home + power)
Nope. Just once. But now i cant to this because debugging doesnt work.
In ODIN COM number doesnt apear when i connect phone witch is on download mode :/
Drivers are installed?
Edit: oops obviously they are. Well try factory reset or rebooting your PC or trying different ports or conputers
Sent from my GT-I9003 using xda premium
I did f.reset. nothing changed. Strange think is that I can change USB connection mode (media device/ kies / mass storage) while debugging in on when actualy mesage should apear saying "turn of debugging to change the USB connection mode".
I've heard kies can affect odin's operation (doesn't on my computer, but not all work the same).
1) go into your task manager and kill all kies processes
2) start odin v1.83 (what version are you using?)
3) with phone in download mode, connect via usb and com should show up in odin
4) select whichever file you want to flash and go!
I dont even have kies.
I was using 1.7, but tried 1.83 and same happened, COM doesnt apear. Maybe should I try to reinstal phone drivers? But i cant fond how to delete old ones :/
nidrox said:
I dont even have kies.
I was using 1.7, but tried 1.83 and same happened, COM doesnt apear. Maybe should I try to reinstal phone drivers? But i cant fond how to delete old ones :/
Click to expand...
Click to collapse
There's an option in kies to reinstall drivers. May take some time
Sent from my GT-I9003 using xda premium
Change USB connection to Mass Storage on your settings.
Try flashing a stock ROM again via mobileOdin.
Installed kies and it helped. Looks like kies have some esential drivers in it thx a lot guys for suggestions
Here is what happened. I was on CM7 with blue cwm, flashed paranoid android successfully, phone works, calls/mms work, everything works but i get rainbow cwm. In order to fix this i followed the directions here http://forum.xda-developers.com/showthread.php?t=1705260, was on step 3 when i installed kies i had the phone connected to the computer via usb. After kies installed i received an error in windows saying the usb device could not be recognized. Since then no matter what i try i can not get the phone into download mode.
Things i have tried:
1- pulling battery, reinserting, holding +- volume while attaching usb cable
2- different usb cable
3- different computers
4- turning on and off debug mode
5- mounting usb via cwm (pretty sure thats what i selected, hard to see with cwm so messed up)
6- uninstalling and re-installing kies+drivers
Any ideas?
***UPDATE: Fixed... installed 2.3.6 rom with red cwm, then installed PA through red cwm. Download mode now works and rainbow cwm fixed, doesn't make 100% sense but it is fixed...
Outstanding pls change title to SOLVED.
mbliss said:
Here is what happened. I was on CM7 with blue cwm, flashed paranoid android successfully, phone works, calls/mms work, everything works but i get rainbow cwm. In order to fix this i followed the directions here http://forum.xda-developers.com/showthread.php?t=1705260, was on step 3 when i installed kies i had the phone connected to the computer via usb. After kies installed i received an error in windows saying the usb device could not be recognized. Since then no matter what i try i can not get the phone into download mode.
Things i have tried:
1- pulling battery, reinserting, holding +- volume while attaching usb cable
2- different usb cable
3- different computers
4- turning on and off debug mode
5- mounting usb via cwm (pretty sure thats what i selected, hard to see with cwm so messed up)
6- uninstalling and re-installing kies+drivers
Any ideas?
***UPDATE: Fixed... installed 2.3.6 rom with red cwm, then installed PA through red cwm. Download mode now works and rainbow cwm fixed, doesn't make 100% sense but it is fixed...
Click to expand...
Click to collapse
Ok so I jumped the gun early last night in assuming it was fixed. As my update states on red cwm and no rainbows, I can get into download mode through cwm (advanced menu). That's as far as I got last night before I went to bed, this morning I went to re-install PA since the phone was stuck at samsung logo (like PA thread says in installation procedures) and i got an installation error. Went into download mode to put today's update on it and found out the PC was unable to recognize the phone. I tried un-installing kies and just installing the infuse drivers, when i connect the phone i get an error saying the device is not recognizable. Tried un-installing the drivers and reinstalling kies+drivers and get the same device is not recognizable error. I also tried different usb cords and on a laptop and get the same device not recognizable on both computers.
Really at a loss now on what to do since the same error is happening on two different computers, something must be wrong with the phone or cwm? Unable to follow un-brick guides since odin won't recognize the phone... Any ideas?
mbliss said:
Ok so I jumped the gun early last night in assuming it was fixed. As my update states on red cwm and no rainbows, I can get into download mode through cwm (advanced menu). That's as far as I got last night before I went to bed, this morning I went to re-install PA since the phone was stuck at samsung logo (like PA thread says in installation procedures) and i got an installation error. Went into download mode to put today's update on it and found out the PC was unable to recognize the phone. I tried un-installing kies and just installing the infuse drivers, when i connect the phone i get an error saying the device is not recognizable. Tried un-installing the drivers and reinstalling kies+drivers and get the same device is not recognizable error. I also tried different usb cords and on a laptop and get the same device not recognizable on both computers.
Really at a loss now on what to do since the same error is happening on two different computers, something must be wrong with the phone or cwm? Unable to follow un-brick guides since odin won't recognize the phone... Any ideas?
Click to expand...
Click to collapse
Since you can get into CWM, there is still so much hope for you, it'll just require trying a bunch more stuff but you will figure out out.
IDEAS:
Did you try installing PA again via CWM? If you are still on red CWM, that means you're not on an ICS kernel yet. You want blue CWM. Maybe try installing the PA zip a couple more times after doing a wipe.
If you're still on red CWM, you might be able to still install a GB rom that might be on your SD card to at least get you out of the mess for now.
For Odin/Heimdell, did you try other other USB ports, besides the 1 on each computer? Can you still get into download mode via the battery pull + volume buttons? The USB cord can be plugged into the computer before you put the battery back. I would trust that before the CWM download mode. Do you get the construction sign triangle that says "do not remove target"? That's what you want for Odin or Heimdell.
MattSoRaven said:
Since you can get into CWM, there is still so much hope for you, it'll just require trying a bunch more stuff but you will figure out out.
IDEAS:
Did you try installing PA again via CWM? If you are still on red CWM, that means you're not on an ICS kernel yet. You want blue CWM. Maybe try installing the PA zip a couple more times after doing a wipe.
If you're still on red CWM, you might be able to still install a GB rom that might be on your SD card to at least get you out of the mess for now.
For Odin/Heimdell, did you try other other USB ports, besides the 1 on each computer? Can you still get into download mode via the battery pull + volume buttons? The USB cord can be plugged into the computer before you put the battery back. I would trust that before the CWM download mode. Do you get the construction sign triangle that says "do not remove target"? That's what you want for Odin or Heimdell.
Click to expand...
Click to collapse
First off thanks for the help!
I was on blue cwm before I installed PA, it gave me the raindbow cwm so i figured i had froyo bootloaders still, which is what started this whole mess.
I am still on red cwm but I can not install roms off my external zip since the phone isn't seeing it, even when i try to unmount/mount it through cwm. The only rom i have is PA which is on internal sd that my phone does see. Unfortunately every time I try to install that rom now it says "successfully installed" then has an error that starts with assert failed: getprop("ro.product.device") == "aries".
Regarding the other USB ports I have tried multiple ports on multiple computers (3 now), my newer one doesn't have usb 1.0 so I know for a fact I was using a 2.0 port, I have tried ports directly connected to the mobo and ports in the front of the case.
And here is the kicker that's really messing me up and what makes me hit a brick wall with every single post I read about this problem. I do get the yellow construction sign that says 'do not remove target', when i plug my phone into the computer with that sign on the screen the computer immediately says 'USB Device Not Recognized', then 'Device driver software was not successfully installed'. What kills me is I get this error on all 3 machines I have tried so far, with different usb cables. Since im getting this error I can not do odin or heimdall.
Sounds super frustrating. I haven't been stuck like that in a while..
Maybe remove the "solved" from your post and others might have ideas too.
I don't know about your cwm, but on mine i can access my external sd through the option called "install zip from INTERNAL sd card." That is different than the usual "install from zip" option. It's a few options down from the regular "install from zip". It is totally backwards, but let's me install from my external sd.
You are obviously having driver issues...so here is this best thing to do...do not use Odin, just try heimdal http://forum.xda-developers.com/showthread.php?t=1524081
Heimdal does not require drivers from kies or Samsung....in fact it uses its own custom drivers
Run heimdal
Connect phone in download mode
Press flash
It may say it needs to install drivers, just do as it says and follow the onscreen instructions to install the custom drivers
Continue with the flash
***when it finishes do not close the heimdal...leave it open***
Put phone back in download mode and flash again,except this time check the box for flash bootloaders-that will fix rainbows
Download mode:
Pull battery
Put battery back in
Hold volume up+down simutaniously *don't touch that power button*
While holding both volume buttons plug USB into both phone and computer
***also make sure you have java installed or else heimdall might not work***
Sent from my HTC PH39100 using xda app-developers app
mg2195 said:
You are obviously having driver issues...so here is this best thing to do...do not use Odin, just try heimdal http://forum.xda-developers.com/showthread.php?t=1524081
Heimdal does not require drivers from kies or Samsung....in fact it uses its own custom drivers
Run heimdal
Connect phone in download mode
Press flash
It may say it needs to install drivers, just do as it says and follow the onscreen instructions to install the custom drivers
Continue with the flash
***when it finishes do not close the heimdal...leave it open***
Put phone back in download mode and flash again,except this time check the box for flash bootloaders-that will fix rainbows
Download mode:
Pull battery
Put battery back in
Hold volume up+down simutaniously *don't touch that power button*
While holding both volume buttons plug USB into both phone and computer
***also make sure you have java installed or else heimdall might not work***
Sent from my HTC PH39100 using xda app-developers app
Click to expand...
Click to collapse
Just followed your instructions step by step. When the phone boots up in download mode i get a msg on the taskbar saying "usb device not recognized" and heimdall never changes from 'device status: disconnected", the big flash button is grayed out. I tried on two different desktops, tried different usb ports including 2.0 and 3.0, tried two different samsung branded cables. Frustrating
Are you entering dl mode through cwm or manually? I've never had luck going through cwm...although I think you stated earlier you couldn't enter dl mode the manual way
Sent from my HTC PH39100 using xda app-developers app
mg2195 said:
Are you entering dl mode through cwm or manually? I've never had luck going through cwm...although I think you stated earlier you couldn't enter dl mode the manual way
Sent from my HTC PH39100 using xda app-developers app
Click to expand...
Click to collapse
Tried both, although I am not 100% sure im in correct download mode manual way. When i enter download mode through red cwm i get the yellow construction sign but the pc never recognizes the phone it seems. Going the manual route the phone gets stuck on the samsung logo with the 4 buttons lit up on the bottom and the pc says "usb device not recognized". So it seems the PC is seeing something the manual route but the yellow construction sign never pops up.
mbliss said:
Tried both, although I am not 100% sure im in correct download mode manual way. When i enter download mode through red cwm i get the yellow construction sign but the pc never recognizes the phone it seems. Going the manual route the phone gets stuck on the samsung logo with the 4 buttons lit up on the bottom and the pc says "usb device not recognized". So it seems the PC is seeing something the manual route but the yellow construction sign never pops up.
Click to expand...
Click to collapse
The Samsung logo should not pop up at all so your either doing something wrong the manual way or your infuse doesn't wanna go the manual way
It may be that your power button is borked...been seeing that a little lately...
When entering download mode it should go straight to the yellow triangle thing or to the option to enter download mode or reboot phone...again when entering download mode you should never see the Samsung logo first
Sent from my HTC PH39100 using xda app-developers app
mg2195 said:
The Samsung logo should not pop up at all so your either doing something wrong the manual way or your infuse doesn't wanna go the manual way
It may be that your power button is borked...been seeing that a little lately...
When entering download mode it should go straight to the yellow triangle thing or to the option to enter download mode or reboot phone...again when entering download mode you should never see the Samsung logo first
Sent from my HTC PH39100 using xda app-developers app
Click to expand...
Click to collapse
OK well that makes sense, the phone refuses to go into download mode the manual way. I am 100% positive I am not touching the power button during the process.
I am unplugging from usb and removing battery
Holding both volume buttons
re-inserting battery with volume buttons held
re-inserting usb cable with volume buttons held
it goes straight to samsung logo every time
mbliss said:
OK well that makes sense, the phone refuses to go into download mode the manual way. I am 100% positive I am not touching the power button during the process.
I am unplugging from usb and removing battery
Holding both volume buttons
re-inserting battery with volume buttons held
re-inserting usb cable with volume buttons held
it goes straight to samsung logo every time
Click to expand...
Click to collapse
if you put battery in without usb will it bootup to samsung logo by it self? if that happens then it supports the possibility that your power button is borked
also may wanna try this method to get into download mode as ive heard of it working for others
pull battery
hold volume keys
plug usb in
place battery back in
and as a last resort there's always usb jigs which i think you can buy for like 5 or 10 bucks on ebay
mg2195 said:
if you put battery in without usb will it bootup to samsung logo by it self? if that happens then it supports the possibility that your power button is borked
also may wanna try this method to get into download mode as ive heard of it working for others
pull battery
hold volume keys
plug usb in
place battery back in
and as a last resort there's always usb jigs which i think you can buy for like 5 or 10 bucks on ebay
Click to expand...
Click to collapse
Ok progress is made! Not sure why it worked this time but I was able to get into download mode manually! The phone immediately went to the yellow construction sign. I cleaned out the area around the power button with an air compressor (not a can), was probably just real dirty from pocket scum. Heimdall still says disconnected
Ok semi-success!
Heimdall recognizes the phone now!
When i go to flash it pops up a window with some instructions for zadig.exe (wants me to select samsung usb in next window), however when i select options -> list all devices it doesnt show samsung usb in the drop down menu. Just 'Gadget Serial' 'Gadget Serial (Interface 0)' and my IR receiver (its a htpc that finally recognized the phone).
Not sure what to do now...
Fixed!
Just used odin and http://forum.xda-developers.com/showthread.php?p=27286083#post27286083 !
Sweet now back to stock and can work on getting back to yummy ICS from here... what a learning experience! Seems it all came down to a dirty power button...
Thanks for the help everyone!
Awesome! Glad you figured it out somehow. You might want to download zen arcade's infuse toolkit or some roms and throw them on your phone just in case something crazy happens during a flash again.
Can not get into download mode or switch on... Please help!
I have Samsung Infuse 4G and I was on Froyo and tried to root my phone with Odin3 v1.7 (I997UCLB3-CWM-root-deodex-extras.tar); however, messed up something now I am not able to switch on the phone or get into download mode or any boot loop screen ... nothing at all... on black screen which shows image of mobile and PC and one yellow triangle between them with "!" sign...
Someone please help me... if there is any way to fix this... or my phone is dead for ever...
Use Odin on that screen, same as download screen
Sent from my SGH-I997 using xda app-developers app
I have rooted and flashed my phone before, but now I am completely unable to get into download mode. None of these methods have worked:
Put in battery, Hold Vol Down + Vol Up and plug in USB
Hold Vol Down + Power and plug in USB
Leave battery out and hold vol down + vol up, plug in USB
Basically I've tried all the methods on the forums and wiki.
This started happening after I used the one click stock Heimdall.. I want to go back to CM.
ADB does not detect my phone so I can't use the adb reboot download option.
SuperOneClick does not detect my phone so I can't root and use CWM.
I am on 2.3.6 which may(?) have a different button combo from what I read.
Has anyone else experienced this problem?
Try reinstalling your drivers
pisherthefisher said:
Try reinstalling your drivers
Click to expand...
Click to collapse
I've tried 2 different computers and have uninstalled/reinstalled drivers twice. Even completely uninstalled Kies and reinstalled Kies to try. It always says "Please connect your mobile phone".
In the Kies menu I go to Menu > Update Drivers and it stays at 0% forever, but in the previous install process it implies drivers were installed already so maybe that's why.
Thanks for your suggestion
Take battery out, put battery in, vol + and - and USB? You didn't mention that one.
Do you know that it's possible that your phone may be in download mode but the screen is black?
I usually take battery out, plug in usb, hold volume buttons & then drop in battery. Try using your wall charger instead of the computer, it still should go download mode. Try a different cable too.
getochkn and champ1919: just tried those methods on 2 different cables including my wall charger. The phone just boots up into Gingerbread instead of going to download mode.
Another weird thing I just noticed: My phone will not go into a standard "charge" state. If it's turned off (whether through power off or removing battery) and I plug it in, it just boots up.
I wasn't aware DL mode could be a black screen but that's not happening either.
You might have to buy/make you a jig then.
If you pull the battery and put it back in without a usb cord attached does the phone stay off or does it boot up by itself?
hechoen said:
If you pull the battery and put it back in without a usb cord attached does the phone stay off or does it boot up by itself?
Click to expand...
Click to collapse
It does stay off, but if I plug in the USB it boots.
Just bought a USB jig on ebay (can't solder) so hopefully that will fix it for me (should have probably just done it earlier considering I've spent a few hours on it now LOL)
wcpyro said:
It does stay off, but if I plug in the USB it boots.
Just bought a USB jig on ebay (can't solder) so hopefully that will fix it for me (should have probably just done it earlier considering I've spent a few hours on it now LOL)
Click to expand...
Click to collapse
Try this first. lol I've never used it but it should work.
https://play.google.com/store/apps/details?id=com.jakar.rebootwidget&hl=en
App won't do, he's not rooted.
Good catch. I missed the stock heimdall part.
So I got my USB jig, and it got me into download mode right away (yay!)
But I'm still not able to root.
Heimdall simply waits for my device to connect.
Zadig shows "Unknown Device" with USB ID 0000 0000 and gives error Driver Installation: FAILED (Resource already exists)
I tried using the usbdeview tool to remove all Samsung and Android USB drivers, and the same results.
Superoneclick hangs after starting ADB server.
Kies is still not working.
I have tried 3 different USB cables.
Windows now says: One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it.
Is it possible the USB port on my phone only works for charging now? Guessing there's nothing even Samsung can do as I purchased it used over a year ago. It's so weird as the phone is otherwise perfect.
You have to uninstall all the drivers you have again and reboot the pc, then get into download mode plug it in and then try to run a heimdall one-click. I think it should figure out the driver situation on it's own.
If not then run zadig. But don't use kies drivers for heimdall or vice versa or you'll be back in driver hell
TwitchyEye said:
You have to uninstall all the drivers you have again and reboot the pc, then get into download mode plug it in and then try to run a heimdall one-click. I think it should figure out the driver situation on it's own.
If not then run zadig. But don't use kies drivers for heimdall or vice versa or you'll be back in driver hell
Click to expand...
Click to collapse
Just tried this, didn't work. Still not recognized, and zadig just shows unknown device. Thank you for your help..
I'm with twitchy on this one, sounds like driver issues. Sometimes it gets labeled as a serial gadget.... have you tired the usb port change? Even the one on the back of the pc?
champ1919 said:
I'm with twitchy on this one, sounds like driver issues. Sometimes it gets labeled as a serial gadget.... have you tired the usb port change? Even the one on the back of the pc?
Click to expand...
Click to collapse
If it is a driver issue I haven't been able to resolve it so far with Kies, Cclean, Heimdall, Zadig, Mini Kies, or the official samsung drivers on 2 different computers. I've also tried several different ports on my PC and laptop.
Have you tried plugging in the phone in download mode, going into device manager and deleting whatever drivers it has for the phone?
Hi, this situation is kind of strange and I hope it's just the battery and not the whole goddamn phone.
What I'm dealing with at the moment is:
The phone doesn't boot
When plugged onto charger or USB cable it boots but stuck at Google logo after a blink and stays there. Also, Home, Back and other buttons are lighten.
When "forcefully" put into fastboot mode, e.g. after plugging it onto USB and instantly pressing Vol Up + Power it stuck there as well, volume rocker no more response neither does the power button. Also, I notice there are no commands at the end like "USB int" etc we see normally.
Fastboot or ADB returns no device found
Please help. I personally believe it could be due to battery, what do you guys think?
Thank you.
As long as you can see the google logo, your device is not bricked. GIve more useful information; like your computer operating system, the last thing you did before this happened, etc.
ej8989 said:
As long as you can see the google logo, your device is not bricked. GIve more useful information; like your computer operating system, the last thing you did before this happened, etc.
Click to expand...
Click to collapse
Thanks. My OS is Windows 8.1 Update 1. The last thing was to install UPDATE-SuperSU to root so that I can install ROM Manager to update Recovery but the installation was aborted so I attempt to flash it via Fastboot with success. Then, wanted to install SlimKat but it couldn't let me mount USB storage so that I can put the .zip file. I, then stupidly click on install via ADB but didn't know how to go back so I pulled the battery and powered up; used ADP push command to transfer said the file, but again for some reason I had to pull the battery and since then I am in above position.
Sent from my XT1032 using Tapatalk
Put the device in bootloader and plug it into the computer, be patient, my phone is rather slow to get detected sometimes.. (Up to 30 min.) Check your drivers on the computer, try rebooting the boot loader from just pressing the power button (while in boot loader mode)..
If all else fails, read up on Wugs NRTK page and about ODIN...
Sent from my Nexus S using XDA Premium 4 mobile app
Setting.Out said:
Put the device in bootloader and plug it into the computer, be patient, my phone is rather slow to get detected sometimes.. (Up to 30 min.) Check your drivers on the computer, try rebooting the boot loader from just pressing the power button (while in boot loader mode)..
If all else fails, read up on Wugs NRTK page and about ODIN...
Sent from my Nexus S using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi, device doesn't go into bootloader without plugging it to computer (I've to press required buttons BEFORE plugging OTG cable). And when it boots in fastboot mode it doesn't let me press any button either. I kept it plugged in for sometime as well when it when it was at Google logo; will try to do the same while in fastboot mode too and let you know. As for drivers, same computer was used before when it was working and it detected just fine immediately (gave me a pain to find the right drivers though - PDANet was a life saver).
EDIT:
I should mention that I broke the OS before this happened by formatting /system folder and wiping other data from CWM recovery - I think, I also rebooted it without flashing the ROM as well.
BaghiXDA said:
Hi, device doesn't go into bootloader without plugging it to computer (I've to press required buttons BEFORE plugging OTG cable). And when it boots in fastboot mode it doesn't let me press any button either. I kept it plugged in for sometime as well when it when it was at Google logo; will try to do the same while in fastboot mode too and let you know. As for drivers, same computer was used before when it was working and it detected just fine immediately (gave me a pain to find the right drivers though - PDANet was a life saver).
EDIT:
I should mention that I broke the OS before this happened by formatting /system folder and wiping other data from CWM recovery - I think, I also rebooted it without flashing the ROM as well.
Click to expand...
Click to collapse
I recently had to update my drivers on my computer.. after it did an update, my phone wasn't recognized..
Try Wugs Nexus Root Toolkit,.. use the options for "bricked".. do this from the bootloader screen (power/volume +)...
I don't have experience with ODIN, so you'll need to read that forum/threads...
Setting.Out said:
I recently had to update my drivers on my computer.. after it did an update, my phone wasn't recognized..
Try Wugs Nexus Root Toolkit,.. use the options for "bricked".. do this from the bootloader screen (power/volume +)...
I don't have experience with ODIN, so you'll need to read that forum/threads...
Click to expand...
Click to collapse
The problem is, even the Toolkit doesn't recognize the device no matter what. Even the keys for ODIN don't work, aren't they Home+VOL+ and Power?
EDIT1:
Kept plugged in for little longer as suggested but it heats up (it's too hot here) so I plugged out. Going to be running it off of Linux and lets see how it goes. :fingers-crossed:
EDIT2:
Tried Adam's UnBrickable method on Linux and even that couldn't find device. But that was to be expected since Adam clearly mentioned in his post that this tool isn't for those who see anything on their screen.
Whelp! Currently I can only see I:\ drive in device manager and that's all under portable devices and that's all. I see the same even in BIOS boot options, it's listed as "Google".
Guess need to close this thread now.