I was doing odin to get to download mode and trying odin gb bootloaders for 2.3.3. Now my phone doesnt boot i have a black screen picture of a phone triangle and computer. What did i do and how can i get out of this? Please need help. Im not even rooted yet i was on eclair and 2.1update1 and did have recovery but update.zip sd file bad so i could never reinstall packages.
Which gb bootloaders were you trying to install the i9000 or the i897
Sent from my SAMSUNG-SGH-I897 using XDA App
i897 gb bootloader. is there hope? ive got black screen and pic of a white phone then an orange triangle! and white computer
cell2011 said:
i897 gb bootloader. is there hope? ive got black screen and pic of a white phone then an orange triangle! and white computer
Click to expand...
Click to collapse
If I'm not mistaken, the phone -!- PC screen is the equivalent of download mode. I'd unplug your phone, restart Odin, plug phone back in and go from there. I'll defer if someone has a more detailed explanation though
edtonn said:
If I'm not mistaken, the phone -!- PC screen is the equivalent of download mode. I'd unplug your phone, restart Odin, plug phone back in and go from there. I'll defer if someone has a more detailed explanation though
Click to expand...
Click to collapse
Your right, got that screen recently myself. Just do as he says and you will be fine.
im trying that just not working i tried took everything out the plug usb and open odin 3 and hold power and volume put in battery and let go of power and nothing?
cell2011 said:
im trying that just not working i tried took everything out the plug usb and open odin 3 and hold power and volume put in battery and let go of power and nothing?
Click to expand...
Click to collapse
leave the power button alone
power down
hold in volume buttons
insert USB
If you managed to get the GB bootloaders in place (assuming I9000), the download mode key combo is to hold Vol- and Power. If you're still on Eclair/Froyo bootloaders, hold Vol-/Vol+ (with power off), then insert the USB cable.
cell2011 said:
im trying that just not working i tried took everything out the plug usb and open odin 3 and hold power and volume put in battery and let go of power and nothing?
Click to expand...
Click to collapse
Unplug your phone, pull your battery for 2+ min. Then open Odin, plug in your USB, press and hold the vol up and vol down, while holding them down, put your battery in. You should see a big triangle with the Android guy . That is Download mode
which odin i have two 3 v1.85 happy flashing and 3v1.85 android+slp
Have odin opened remove battery, insert battery,hold vol+ and vol- , then insert usb . if odin recognizes the phone try flashing the bootloaders again
Sent from my SAMSUNG-SGH-I897 using XDA App
nothing im not sure at this point its like the usb doesnt even make a sound when i plug into computer
odin is not recognizing my phone
is there someone that would be willing to troubleshoot this for me over the phone or chat?
This is for sale if someone can fix this PM me. Does anyone have one for cheap i dont even care if it is cracked as long as its fully functional
Is the usb plugged into back of pc or port number 1 on laptop?
Sent from my SAMSUNG-SGH-I897 using XDA App
Reboot your computer
What OS are you running?
Let's run down a quick checklist of things to make sure that you're putting yourself in the best possible place for success:
1. Unplug any cables you have plugged in right now, Turn off ODIN, remove the battery, and reboot your computer.
2. Boot up your computer, let it fully boot and settle. Once it's fully settled, double-check to make sure you have the Samsung USB drivers installed for the Captivate (and that's its for the correct version of Windows - x86 or x64).
3. Assuming the drivers are present and correct, start up ODIN (You might try the One-Click to Stock, as it will take you back to a stock state). Let it sit for right now.
4. Plug your USB cable into a port that connects directly to the motherboard (but not to your phone just yet). On a desktop, it will be on the back of the machine. On a laptop, you may have to find it by trial and error.
5. Reinsert the battery. Hold Vol+/Vol-, and then insert your USB cable. This should put you in download mode. If not, pull the cable, remove the battery, reinsert the battery, and hold Vol- and power until download mode appears, then insert the USB cable.
6. Assuming you are in download mode, and the cable is inserted, check to see if ODIN recognized the phone. If not, try a different USB port on the computer. You may have to reboot your computer between trials.
7. If ODIN still won't recognize the phone, you may need to look into using Heimdall to flash.
Post back if you have questions.
I have to get a USB jig to get to download mode and special thanks to kangi26 for alll his help. And ty jmtheiss for the last post
cell2011 said:
i897 gb bootloader. is there hope? ive got black screen and pic of a white phone then an orange triangle! and white computer
Click to expand...
Click to collapse
I thought I remember seeing somewhere a ways back that from this alternate d/l screen Odin may not recognize the phone, but that flashing Odin package would work anyway.
Pretty sure I saw that...but at this point, can't hurt to try. Otherwise jig should get you there.
Sent from my SGH-I9000 using XDA App
Related
NOTE:
So far this has been the only sure fire method I've found to 100% get around any brick situation regardless of firmware, etc. This only works for the captivate, not any other galaxy s variant.
Situations: phone-!-Computer / no download mode
Black Screen / RST_STATUS 0x0
Procedure:
1. Remove the battery, external SD card and SIM card.
2. Wait 10 seconds.
3. Open odin3
4. Connect usb cable.
5. Hold volume up + volume down + Power.
6. Insert battery.
7. Release POWER BUTTON ONLY.
You should now be in immediate download mode.
Please forgive me if this is duplicate some where, but I tried every procedure I could find on google to no avail, then accidentally found this method just before I was going to box it back up and see if my buddy at AT&T would make me eat it or not.
My situation was: Launched Odin3 to flash H3 firmware, died twice in the middle, and on the third time locked up half ways just at the beginning of factoryfs.rfs -- Then the phone did nothing. Blackscreen is all. Interestingly enough, while in the state if you hold volume up + power, it will give a hw diagnostic screen. Beyond that I could get no where. Just a black screen, no acknowledgement when connected to PC, no charging indicator, nothing.
If this is a dupe Im sorry but this method I could not find and hope to make it readily available to people who may think their phones bricked.
Update 12/22/2010:
How to BRICK the phone / WARNING!!!
If for whatever reason you decide to use Odin to flash a stock GTI9000 ROM and manually add the kernels and modems using a "pure" 2.2.1 sammy rom. BEWARE.
Researching a lot, it seems the consensus is that the sbl in the 2.2.1 versions of the GTI9000 has *hard* download mode crippled.. Meaning if there is a software screw up YOU CANNOT USE A USB JIG OR ANY OTHER METHOD OF GETTING THE PHONE IN DOWNLOAD MODE!!! To fix it you'll need a new one or JTAG to replace the bootloader.
As far as I can tell, beyond getting completely rid of the AT&T logo, there is no need to flash boot/sbl to get the "purity" of the 2.2.1 sammy roms.
Extract all files from the tar EXCEPT boot/sbl and re-tar and flash just those to avoid overwriting the stock captivate boot loader.
Also, it does not appear the boot/sbl from the captivate 2.2 leak suffers this same problem.
For any one iffy on bricking their phones, stay away from roms that remove COMPLETELY the AT&T logo on boot. This generally means the boot loader has been messed with any you may be screwed if you soft brick the phone. Most CWM roms dont overwrite the boot/sbl, but some can and do. Watch yourself.. if it the AT&T logo goes away COMPLETELY, I recommend flashing JF6 with One click while the roms alive using adb reboot download and try another rom.
thanks!
worked...took a few tries but some trick with this captivate to get it into download mode.. i was totally bricked too, diag screen with PC/Phone icons and exclamation mark. for me 1.) plug usb, 2.) hold power and vol up/down and connect battery (it fell out) and i was in download mode
I guess a similar procedure was on the odin3 one click thread, but there is something different in your procedure, it's not my case but it would be nice if some people confirms this as this may be useful and if it really works it should be included in odin thread
What worked for me was: Pull the battery, sim and micro sd card. Open odin on the PC. Insert the battery. Hold vol up and down then with the buttons held connect the usb cable. Just remember to plug in the usb cable with the vol up and down held in and odin must be open on the computer.
I also ran into the vol up plus power red text screen. Interesting to note that one of the fields will change depending if the usb cable is connected or not.
mine is dead
mi samsung captivate was working great but, suddenly it go black and only the touch bottom have light, when i plug it in the a/c it show is charging. i'm mac user and a read that i ned to use odin3 but it not work on mac. how i can unbrick the phone???
is rooted with one click lag
the dbdata was modif to
thats all
HEEEEELLLLLPPPPPP
Odin will not open on the mac?
Cant you use a virtual machine and use Odin on a Mac that way?
Or else take the odin 3 single click for JF6 and use on a friends Windows Computer.
Please help - unable to flash back with Odin3
I have pretty much tried it all at this point and am trying to figure out what I'm doing wrong.
I followed the directions just in case get to the big yellow triangle with the droid shoveling and the screen stays at "downloading, do not turn off target..."
Of course I had Odin3 open already but its not seeing my phone, USB drives are installed am using Odin3 ver. 1.30.
Any help would be appreciated, TIA!
TechNut* said:
I have pretty much tried it all at this point and am trying to figure out what I'm doing wrong.
I followed the directions just in case get to the big yellow triangle with the droid shoveling and the screen stays at "downloading, do not turn off target..."
Of course I had Odin3 open already but its not seeing my phone, USB drives are installed am using Odin3 ver. 1.30.
Any help would be appreciated, TIA!
Click to expand...
Click to collapse
Best way to get download mode is use adb and type adb reboot download.
Or follow the volume up/down held with odin open on the computer, then you plug in the usb cable to the computer.
askpcguy said:
What worked for me was: Pull the battery, sim and micro sd card. Open odin on the PC. Insert the battery. Hold vol up and down then with the buttons held connect the usb cable. Just remember to plug in the usb cable with the vol up and down held in and odin must be open on the computer.
I also ran into the vol up plus power red text screen. Interesting to note that one of the fields will change depending if the usb cable is connected or not.
Click to expand...
Click to collapse
Thank you thank you thank you. i had a totally dead no boot or anything and this worked, i was going through the whole returning the phone senerio in my head
mattbeau said:
Thank you thank you thank you. i had a totally dead no boot or anything and this worked, i was going through the whole returning the phone senerio in my head
Click to expand...
Click to collapse
Just sharing the info! Makes you think twice about trying something else don't it?
does not seem to work because as soon as my battery touches the contacts it goes to the diag screen. do I have to release the power button in super human speed times there?
looked at all threads here, looked elsewhere -- there are some that are not fixable. Wanted to add that in case others come here and think that they might be the only ones that can't get it to work.
Ended up sending mine off to Samsung to reset today. :/
I love you! I called AT&T to send me documentation to sign and it was going to cost me 125 dollars to get it replaced even with warranty. And you fixed it !
i have tried just about every single method detailed in these forums, and nothing works.
Trying what OP suggested just sends me to the battery charging animation screen.
Anybody have any ideas ?
file analysis
I keep can get to the download screen and I hit start and it does the same thing everytime it just does File analysis i cant figure what i am doing wrong here somebody please help me
I think the issue was it had something to do with 64 bit windows 7 i just re did the stock rom one click solution and it worked fine
thekurrgan said:
NOTE:
5. Hold volume up + volume down + Power.
6. Insert battery.
7. Release POWER BUTTON ONLY.
You should now be in immediate download mode.
Click to expand...
Click to collapse
Thank you for sharing your experience.
I don't have a Captivate yet but am doing research on it and hopeful of getting one. I am confused about one thing.
Every where that I have read about how to enter Recovery mode or Download mode on the Captivate using the 3 button method, it says holding down both Volume UP + Volume Down (plus Power button) will enter Recovery mode. But you say it enters Download mode which is confusing to me. As I recall, to enter Download mode you must press the Vol Down only (plus Power button). Could it be because the phone won't go into Recovery mode, it goes into Download mode instead? Am I missing something?
Thank you!
Download mode is for updating the phone's firmware.
Remove battery, plug in the usb cable to the phone, open ODIN on the computer (need usb drivers installed before hand) on the phone hold volume up and down then plug the phone into the computer. Your phone will say DOWNLOADING. This method works even if you run into problems and the phone refuses to boot properly.
Recovery mode is for installing Update.zip. The method is tricky but involves holding volume up/down and power, the phone will show ATT then go black. It will repeat that but after the second time it goes black let go of power.
If that doesnt work, android debug tools ADB reboot recovery will work even better.
Or root the phone and use Clockwork Rom manager to boot into recovery, just press the menu item.
askpcguy said:
Download mode is for updating the phone's firmware.
Remove battery, plug in the usb cable to the phone, open ODIN on the computer (need usb drivers installed before hand) on the phone hold volume up and down then plug the phone into the computer. Your phone will say DOWNLOADING. This method works even if you run into problems and the phone refuses to boot properly.
Recovery mode is for installing Update.zip. The method is tricky but involves holding volume up/down and power, the phone will show ATT then go black. It will repeat that but after the second time it goes black let go of power.
If that doesn't work, android debug tools ADB reboot recovery will work even better.
Or root the phone and use Clockwork Rom manager to boot into recovery, just press the menu item.
Click to expand...
Click to collapse
Thank you askpcguy! I understand the difference between Download and Recovery modes.
So the procedural difference here is having the battery in + Power button, versus battery not in (use USB cable instead) and no Power button. Can the phone get power from the PC via the USB cable? This seems to differ from what the original poster said about download mode. Perhaps OP could edit his original post for clarification? Or am I still missing something? Thanks to all
The phone does get power from the USB cable.
The difference is one procedure uses the USB cable (download mode) and the other does not (Recovery mode).
The volume up+down method does not use the power button, the phone is powered on into download mode once you plug in the USB cable.
We say pull the battery to get the phone powered off. If a firmware flash stalled or doesn't complete, pull the battery and try again!
I now understand the precedural difference.
Thank you askpcguy!
ok...so i rooted my phone tonight. Downloaded busybox...everything was going great. So i dl the Odin Froyo update...and halfway through...the USB cable came out. Now...When i try and turn it on it shows an icon of a phone...exclamation point and a PC..
I can get the phone into dl mode..but when i connect it to Odin...it just says "File analysis...for hours....nothing happens. I have dl the stock Rom from XDA and tried that. Both Odins recognize my phone (Ie they show up in yellow) But nothing ever happens with the update. So now what? Am i bricked.
I wish I could help, but I almost had the same thing happen. I can tell you the prob with the cable connection is the cable, mine was. I ordered a couple online and trashed the factory cable. Sorry I couldn't be more help.
Search for One-Click Odin back to stock.
Remember to access download mode you have to pull and replace the battery, hold both vol. buttons, and while holding, plug in the cable.
If Odin recognizes the phone, then there *most likely isn't a problem with it.
Ditto, Pull battery, sd card and sim, put battery back in, follow directions to the letter, start oden first, then install cord while holding down both up and down vol. buttons.
ok so i went to AT&T webiste to install 2.2. well not my phone is stuck on a black screen with the cell phone ! PC picture.. I have tried to hold teh volume keys and power etc.. nothing all i get is that picture.. What can i do to fix this tonite??
Buy a jig. You would have come to that conclusion already if you had bothered searching the forums.
Pull battery, sim, external sd. Put battery back in. hold just volume up and down, plug in usb. Do you get to an android guy with s shovel? If so you will likely recovery tonight. If not you will need a usb jig
mcord11758 said:
Pull battery, sim, external sd. Put battery back in. hold just volume up and down, plug in usb. Do you get to an android guy with s shovel? If so you will likely recovery tonight. If not you will need a usb jig
Click to expand...
Click to collapse
^ This. People don't always need a jig. (most cases they won't). Try that first then if every way imaginable of doing that fails. Build a jig (if you know how, there's a thread around here somewhere) or buy one.
well now if anything was CLEAR on the steps to fix this i wouldn't be asking..
I get the android with the shovel sometimes, but when i started the mini keis the install fails.. wants me to do emergency recovery which i do then that fails. that is when i get the cell ! pc screen..
sorry if i am asking.. just new to this and this was my first post..
Forget kies for now, that is not going to help you now, you can get to that screen though correct?
Pull your battery, on the left side on the white sticker is your build number. Something like 1008. What is yours
This should help in many cases.
http://forum.xda-developers.com/showthread.php?t=944418
Flash stock software.
It might just be that you need a new usb cable because I had the same problem where it seem to get stuck when I tried to flash the new firmware and I got the same screen you got but I tried a different usb cable and it worked.
Come on mods do some modding
i think the build # is 1083
I just changed the usb cord. followed these steps:
This only works for the captivate, not any other galaxy s variant.
Situations: phone-!-Computer / no download mode
Black Screen / RST_STATUS 0x0
Procedure:
1. Remove the battery, external SD card and SIM card.
2. Wait 10 seconds.
3. Open odin3
4. Connect usb cable.
5. Hold volume up + volume down + Power.
6. Insert battery.
7. Release POWER BUTTON ONLY.
You should now be in immediate download mode.
Get the android guy with shovel.. downloading etc..
I looked at the odin screen and it shows:
0:[COM7} in the ID:com
But feels like nothing is happening..
sorry sticker says CE1068!
Redjules8 said:
sorry sticker says CE1068!
Click to expand...
Click to collapse
there is no model 1068 or 1083
Redjules8 said:
ok so i went to AT&T webiste to install 2.2. well not my phone is stuck on a black screen with the cell phone ! PC picture.. I have tried to hold teh volume keys and power etc.. nothing all i get is that picture.. What can i do to fix this tonite??
Click to expand...
Click to collapse
If you're trying to upgrade to 2.2 from AT&T then you don't need to enter download mode or recovery mode. First make sure that USB debugging is unchecked.
Go to Menu>Settings>Applications>Development
Go back to Applications>USB Settings
(Recommended) Check ask on connection
Assuming you already have the drivers installed, open Kies mini as this is how to install the update. Plug in the USB cord, check the Kies (firmware update) button on the phone and wait for Kies mini to find your phone.
If it finds your phone it will do the rest. Just be patient. Good Luck!
bornjamerican said:
If you're trying to upgrade to 2.2 from AT&T then you don't need to enter download mode or recovery mode. First make sure that USB debugging is unchecked.
Go to Menu>Settings>Applications>Development
Go back to Applications>USB Settings
(Recommended) Check ask on connection
Assuming you already have the drivers installed, open Kies mini as this is how to install the update. Plug in the USB cord, check the Kies (firmware update) button on the phone and wait for Kies mini to find your phone.
If it finds your phone it will do the rest. Just be patient. Good Luck!
Click to expand...
Click to collapse
Good one.. I like how you just gave him a bunch of advice he can't really use in a soft-brick situation, even after quoting him saying that he's soft bricked
I do this regularly (switching between roms and kernals). The easiest way I fix it is to use Odin3_v1.0 and just load some random pda/kernal/modem files in there and run it. When it gets into the OS, just turn it off and use Odin3 to put I897UCJF6-final-OCD-REV0 back on it. Works every time.
i have a samsung captivate (build 1012) that i recently soft bricked and so far i have found no way to get it into download mode to revive it. i have used odin one click and flashed other roms before and im not new to all of this, but this one is just not working out so well. it was on serendipity 6.4 and i wanted to update to serendipity 7 beta 2 so i downloaded all the files i needed and went into download mode to flash gingerbread. odin went just fine until it reached the step where it says "do not power off target" and then froze and didnt go any further than that. so i unplugged the phone and every button combination i know to put it into download mode to run through odin one click and it simply wont do it. it is stuck on the phone-!-pc screen and thats all it will do. i have tried the gb bootloader button combinations and froyo combinations. im about to just order a jig because it looks like thats all i can do. has anyone else had something similar happen? i need all the help i can get.
I have experience in this area but not with Samsung devices. Is the bootloader unlockable, and if so have you unlocked it. Also, have you gotten any software on your computer to recognize your phone?
i have unlocked it and i do have the 64 bit drivers for my phone (im running windows 7 64 bit) and i have always been able to do this but i think odin screwed up my ability to get into download mode because of my build number :/
What Screen do you get when you power on? Phone ! Computer? Or something else?
Sent from my Galaxy S Firefly 3.0
Can you get any sign of fastboot protocol support, or Koushs Clockworkmod recovery. You said you have installed the drivers, but when you plug it into your computer does your computer recognize your device as anything. Sorry about this whole situation
Hey i found this. I have not the slightest clue if it will help you but i will post it here just in case.
So far this has been the only sure fire method I've found to 100% get around any brick situation regardless of firmware, etc. This only works for the captivate, not any other galaxy s variant.
Situations: phone-!-Computer / no download mode
Black Screen / RST_STATUS 0x0
Procedure:
1. Remove the battery, external SD card and SIM card.
2. Wait 10 seconds.
3. Open odin3
4. Connect usb cable.
5. Hold volume up + volume down + Power.
6. Insert battery.
7. Release POWER BUTTON ONLY.
You should now be in immediate download mode.
Make sure to try this a few times if it does not work imediately.
I hope it works and wish for the best
yeah i get the phone ! computer screen, thats all it will do no matter what combination i try
Try this
Here is another thing to try as button combinations, removing the sdcard and sim seem to be the only possible way out of this
What worked for me was: Pull the battery, sim and micro sd card. Open odin on the PC. Insert the battery. Hold vol up and down then with the buttons held connect the usb cable. Ju..st remember to plug in the usb cable with the vol up and down held in and odin must be open on the computer.
With your current luck this will probably not work but anything is worth a try
From the Phone ! PC screen I've flashed stocked roms. If Odin can see your phone from this screen you don't need to enter download mode because your technically already in an alternate download mode. In theory you should be able to just Flash to stock from the Phone ! PC screen.
Sent from my Galaxy S Firefly 3.0
Does Odin recognize it and did you fix it?
Well I never got the buttons to work :/ but I made a jig from a few resistors and my baby is back once again haha
Sent from my SAMSUNG-SGH-I897 using XDA App
I do have one other issue though, I still want to flash serendipity 7 but when I try it odin freezes on "do not turn off target" after setting pit file. Any advice? Its the odin version that comes with serendipity 7. I believe 1.72 or something
Sent from my SAMSUNG-SGH-I897 using XDA App
I hope i'm in the right board for this, if not i'm sorry, but i've run into a major issue recently.
While working on installing MIUI on my Galaxy S 4G from Tmobile I hit a point where it turned offand absolutely nothing is happening. I don't remember when exactly this happened but I think it was after something with odin.
It's not detected by Kies or anything, it's just off and nothing can get it to turn back on. I left it on the charger and went to sleep last night, this morning it still isn't doing anything.
Any help would be greatly appreciated.
In the state that it's in, I believe the phone will still boot into Download Mode, even though nothing appears on the screen. Odin will still recognize the device if it is booted into download mode.
Just open the back cover and remove the battery. It is also recommended you remove the SD card and SIM card. Put the battery back in, and connect the usb cable while holding the power up button, and plug it into your computer. Open up Odin and it should recognize the device still. If it doesn't, try these steps again until it does.
Since you were trying to flash MIUI, we should be safe to assume you're running Gingerbread on your SGS4G, so you can download a stock, Odin flashable ROM from here. Flash that using the PDA in Odin, let it reboot, and you should be fine again.
If you have any further questions that need answering, refer to the SGS4G community.
pudgybunnyBry said:
In the state that it's in, I believe the phone will still boot into Download Mode, even though nothing appears on the screen. Odin will still recognize the device if it is booted into download mode.
Just open the back cover and remove the battery. It is also recommended you remove the SD card and SIM card. Put the battery back in, and connect the usb cable while holding the power up button, and plug it into your computer. Open up Odin and it should recognize the device still. If it doesn't, try these steps again until it does.
Since you were trying to flash MIUI, we should be safe to assume you're running Gingerbread on your SGS4G, so you can download a stock, Odin flashable ROM from here. Flash that using the PDA in Odin, let it reboot, and you should be fine again.
If you have any further questions that need answering, refer to the SGS4G community.
Click to expand...
Click to collapse
Thanks for the help, currently i'm attempting to get Odin to recognize it with no success. I've gone through the process about 3 times and will continue till I hopefully get some results. If it makes any difference I don't hear the sound of windows detecting a new USB device anymore like i use to when I would put it into download mode.
As far as I remember, Windows doesn't make a sound when booting into Download Mode. I just realized I made an error in my previous post. You need to be holding the volume up button when you plug it into the computer. In some cases you will need to hold the power button at the same time. Try giving it the volume up + power on button when you plug into your PC. Make sure you're holding the button combo long enough for the SGS4G to power on and into Download.
Moved to General Q&A.