So i have a Samsung Galaxy S running Cyanogenmod Nighly 61. Since there was a new version of MIUI, I downloaded it and I flashed it using Clockworkmod. I didn't go back to the Froyo bootloaders like I usually do when I switch between MIUI and Cyanogenmod, cause I didn't want to restore all my apps and i said that if it does get messed up I could still use odin. So When Miui finished flashing I rebooted the phone but everything forced closed and nothing would work at all. So I put my phone into download mode and I opened Odin, only it didn't show the 'added' message like it usually does. So then I flashed the cyanogenmod nightly again and everything worked again, but now my computer doesn't recognise my phone anymore and neither does Odin. I've tried to install the SGS drivers that I found on my forum, but still it doesn't work at all.
Is there any way I can fix this? Thanks in advance
Please anyone?
sandeshnl said:
So i have a Samsung Galaxy S running Cyanogenmod Nighly 61. Since there was a new version of MIUI, I downloaded it and I flashed it using Clockworkmod. I didn't go back to the Froyo bootloaders like I usually do when I switch between MIUI and Cyanogenmod, cause I didn't want to restore all my apps and i said that if it does get messed up I could still use odin. So When Miui finished flashing I rebooted the phone but everything forced closed and nothing would work at all. So I put my phone into download mode and I opened Odin, only it didn't show the 'added' message like it usually does. So then I flashed the cyanogenmod nightly again and everything worked again, but now my computer doesn't recognise my phone anymore and neither does Odin. I've tried to install the SGS drivers that I found on my forum, but still it doesn't work at all.
Is there any way I can fix this? Thanks in advance
Click to expand...
Click to collapse
Think I had this problem awhile ago. but can't remember what I did.
you could try some how get them drivers. If you download them off the web or install kies and flash back to stock. but should be somewhere in the forum about this. good luck!
cyanogenmod not recognize usb
so from what i see is that you said that when you connect the phone to you're pc , you can not access the phone or the phone is not recognize in my computer. CONNECT phone to PC after pull down the notification bar from phone and tap on the tab DEBBUGIN USB and choose action portal and tools or whatever.Also go in MEMORY and see if SDCard is mounted.
Related
Im looking for help on fixing my SGS4G.
Here is the current list of problems:
1. Phone isnt recognized when i plug it into any computer (i download all the drivers, Kies and Odin both cant find it, and 1 out of every 10 tries my computer will recognize the microsd card and treat it like a normal sd card)
2. My Dialer and Messages will open for 3-4 seconds and close without a force close screen or anything. Obviously this is really annoying :|
3. Im rooted but trying to go back to stock to redo this whole process over is becoming a pain.
4. When trying to flash a custom rom from ROM manager i get the signature verification failed message.
Im about to try the heimdall one-click package to get back to stock and see if that works...idk if it will find my phone though.
My system info:
Firmware: 2.3.6
Baseband: T959VUVKJ6
Kernal: 2.6.35.7-T959VUVKJ6-CL694130
Build: GINGERBREAD.VUVKJ6
If i manage to get back to stock/unrooted where do you guys suggest i go from there? im kind of out of the loop as far as where we are with ICS or jellybean or any of that :|
Thanks a bunch in advance and sorry if this is nooby
Also:
adb devices shows nothing :\
USBDview shows nothing for my phone...i plug it in with debugging on and all it does is charge my phone
First problem. Do not use ROM manager. Download ROM zips and flash through CWM/TWRP.
Have you tried using a different cable when connecting to PC? Some cheaper cables do not work well, or at all. I have a blackberry cable that I only use for this.
Have you tried alternate USB ports. Sometimes that may be this issue as well. Also, some people have better luck with Odin, while others have better luck with heimdall. You may want to try the alternate and see if you have the same issue.
I would follow the guides on going back to stock. You may have old conflicting drivers so you may need to completely remove old ones first.
Sent from my SGH-T959V using xda app-developers app
I use the cable that came with it and the one that comes with my girlfriends phone which is a different phone with no problems. You might want to mess with the usb configuration on your computer
Sent from my SGH-T959V
As far as the dialer and messenger app backing out automatically that was an issue with all bml gingerbread roms. I think there was a fix but I'm not sure. Cm7 is mtd based gingerbread and it doesn't have that problem.
Sent from my SGH-T959V using xda app-developers app
Jiggly,
Ive tried every USB port on my desktop and my laptop. Both of them im reinstalled the drivers on. On my desktop the moment I plug it in it says the device malfunctioned.
Usbdview didn't show anything like the guides said it should. (HTC something...there was.nothing)
ROM manager is just on my phone ive never actually used it other than to boot to recovery
Sent from my SGH-T959V using xda app-developers app
The phone goes into download mode but heimdall still doesnt detect it, windows still tells me the device cant be recognized and im out of ideas.
i went into regedit and deleted all the samsung folders and reinstalled the drivers fresh but im still not getting anywhere...
flash the blastoff kernel, or some custom GB kernel.
Let it convert to ext4, it'll take 10 minutes,
flash a rom through CWM which you will now have.
Im missing something here...but i cant flash anything as everything is unsigned and i cant get out of 3e recovery. ODIN, heimdall etc still wont find my phone from my computer(s) and everything i attempt to flash is unsigned.
Can you boot into your ROM?
boot into my rom as in use my phone? yes the phone functions fine with the exception of not being able to plug it into my computer to tether it/use mass storage and these darn auto close problems with my dialer/messages
Well i was able to flash a new kernel with CWM then upgraded to cm9.
didnt realize contact sync didnt work so i lost all that info :\ computer still says the device malfunctioned but my messaging and dialer apps dont auto close now lol
At first I should say that it is not my phone and don't know how exactly what happened to it
One of my friend gave it to me and told that after dropping from 1meter on the ground phone
start auto rest some times in day and after one month it got boot loop.
he take the phone to a person to fix but that guy
Said :the hard don't work.
so he decided to buy a new phone and now he asked me to find a way for fixing.
I don't believe that the hard don't work cuz I have damaged my phone hard by repapartitioning from Emmc to MTD.if the hard dosent work the phone shouldn't turn on.
Now I have a galaxy sl which could be turned on and can go to downloading mod. what should I do? his owner said he have flashed a Rom once but no result.
is there a way for fixing?
We can't say if there is a hardware damage, for sure. But, if you want to flash a new firmware, check this thread. http://forum.xda-developers.com/showthread.php?t=1894737
If the phone works well after flashing new rom, then all is fine. If not, you can go to Samsung's service center and get it checked.
jitendragarg said:
We can't say if there is a hardware damage, for sure. But, if you want to flash a new firmware, check this thread. http://forum.xda-developers.com/showthread.php?t=1894737
If the phone works well after flashing new rom, then all is fine. If not, you can go to Samsung's service center and get it checked.
Click to expand...
Click to collapse
Unfortunately the pc say it is unknown device I have tried different ways but no result...
Is there a way to install the cwm from stock recovery?
As far as I know, you need to connect your phone to pc to install any cwm. try reinstalling the Samsung mobile drivers, and reconnecting the phone in download mode. as long as odin detects phone in download mode, everything else is secondary.
if the internal sd is gone just stick in an external one and try flash a new rom it will install to external sd (if works like the i9000)
have you installed kies or the usb driver only package ?
ziointrud3r said:
if the internal sd is gone just stick in an external one and try flash a new rom it will install to external sd (if works like the i9000)
have you installed kies or the usb driver only package ?
Click to expand...
Click to collapse
the sd card work(dont know about internal)and when i go to stock recovery it detects but. ihave installed samsung usb driver
and i had galaxy s3 too so i know how does samsung devices work..i am wondering is ther a way to install clockwork recovery on galaxy sl with stock recovery...cuz when the phone go to download mod windows says unkown device .
i dont know what should i do
with odin 1.85 or 1.83(later versions seems to have some issues with this phone) even if windows doesn't recognize the phone it must be shown as a connected com port (with my original rom the phone has never been recognized by the sistem)
if this dosen't occur i think you cuold try to use hendmall on any linux live distro or adb but with standard recovery i don't know if you can access the phone trought it
the install update from .zip in standard recovery if i remember well dosen't workin this case it gives error probably because the original samsung rom packages are recognized by the SS_DL.dll or any other file inside of it inside all the official roms but this is just my modest opinion i'm not sure at 100% on the ddl story you have nothing to loose anyway so you can give a try with this way
Hi,
Figured id start off by explaining the history on my Samsung Note N8010
A while back i installed Hyperdrive Rom RS8 (i think), no problems, flawless. However it did change my device id to an N8013, not sure why.
Recently i wanted to use SkyGo Tablet app, however root cloak and Voodoo does not cloak SkyGo Tablet app on this specific rom so i figured id revert back to the original 4.1.2 stock.
I used Mobile Odin, grabbed the zip/tar from the Sam-mobile and hit go.
On reboot, it would not load in, stuck on the Samsung Note 10.1 splash. I do have access to download mode and recovery mode, but it's labelled Android System Reocvery <3e>.
It is worth noting that USB debug did not work on Hyperdrive, so currently no matter what computer i connect this tablet to Odin, Kies or anything will not see it.
When trying to "apply update from sd card" i get E:\ mount problems, it pretty much fails every time.
Any suggestions?
kitchenspoon said:
Hi,
Figured id start off by explaining the history on my Samsung Note N8010
A while back i installed Hyperdrive Rom RS8 (i think), no problems, flawless. However it did change my device id to an N8013, not sure why.
Recently i wanted to use SkyGo Tablet app, however root cloak and Voodoo does not cloak SkyGo Tablet app on this specific rom so i figured id revert back to the original 4.1.2 stock.
I used Mobile Odin, grabbed the zip/tar from the Sam-mobile and hit go.
On reboot, it would not load in, stuck on the Samsung Note 10.1 splash. I do have access to download mode and recovery mode, but it's labelled Android System Reocvery <3e>.
It is worth noting that USB debug did not work on Hyperdrive, so currently no matter what computer i connect this tablet to Odin, Kies or anything will not see it.
When trying to "apply update from sd card" i get E:\ mount problems, it pretty much fails every time.
Any suggestions?
Click to expand...
Click to collapse
The original issue is probably one of two things. If you downloaded the rom directly to your device its Likely a bad download. DID YOU CHECK MD5 Before flashing. There are also limitations to Mobile odin.
What i would suggest is to uninstall Kies . Make sure you have no other android devices installed on your computer .Download the older version again from Samsung website. Install on your computer. Download odin again i think you want the one a version back as well NOT Latest.
Reboot into download mode. Run odin. if it still does not see your device check Device manager and see if its showing up with a yellow mark. Look for a post i made last week explaining how to correct usb driver for windows.. Download mode should work with out usb debug on if i remember correctly..
erica_renee said:
The original issue is probably one of two things. If you downloaded the rom directly to your device its Likely a bad download. DID YOU CHECK MD5 Before flashing. There are also limitations to Mobile odin.
What i would suggest is to uninstall Kies . Make sure you have no other android devices installed on your computer .Download the older version again from Samsung website. Install on your computer. Download odin again i think you want the one a version back as well NOT Latest.
Reboot into download mode. Run odin. if it still does not see your device check Device manager and see if its showing up with a yellow mark. Look for a post i made last week explaining how to correct usb driver for windows.. Download mode should work with out usb debug on if i remember correctly..
Click to expand...
Click to collapse
Hi, cheers for the response,
I have tried all of what you have said but unfortunately no PC will see my device, not even an "unrecognized device". I have access to android system reocvery <e3> and Download mode (Odin) but the pc just won't recognized, tried new leads and so forth, nothing.
So I got this free Galaxy Tab 10.1, and tried adding a Custom ROM to help it run better, and be able to run some apps that the old android 3 os couldn't run. As of now, it has CWM v6.0.3.6 installed, as well as a KitKat ROM. This ROM seems to have been corrupted, and now the keyboard constantly stops working (receiving constant pop ups about it) and it no longer will connect to my PC via USB, although it still charges when it is plugged in.
I made a mistake when I was installing this ROM, and my backup stock ROM was never loaded onto the tablet.
My original thought was to use the install from sideload option to get a different ROM onto it, but it doesn't detect even in Recovery mode.
Odin does detect the device, so is there a way to use this utility to fix this problem? Or maybe some other option that I'm not thinking of?
Thanks for the help
ElDochart said:
So I got this free Galaxy Tab 10.1, and tried adding a Custom ROM to help it run better, and be able to run some apps that the old android 3 os couldn't run. As of now, it has CWM v6.0.3.6 installed, as well as a KitKat ROM. This ROM seems to have been corrupted, and now the keyboard constantly stops working (receiving constant pop ups about it) and it no longer will connect to my PC via USB, although it still charges when it is plugged in.
I made a mistake when I was installing this ROM, and my backup stock ROM was never loaded onto the tablet.
My original thought was to use the install from sideload option to get a different ROM onto it, but it doesn't detect even in Recovery mode.
Odin does detect the device, so is there a way to use this utility to fix this problem? Or maybe some other option that I'm not thinking of?
Thanks for the help
Click to expand...
Click to collapse
Greetings and welcome o assist. If odin detects your device then kies emergency firmware recovery should work, that will return your tablet to its original state. The other option is to flash a different rom through recovery, just download it to your sd card and then flash it
Good Luck
Sawdoctor
sawdoctor said:
Greetings and welcome o assist. If odin detects your device then kies emergency firmware recovery should work, that will return your tablet to its original state. The other option is to flash a different rom through recovery, just download it to your sd card and then flash it
Good Luck
Sawdoctor
Click to expand...
Click to collapse
I booted the device into download mode, where it is detected by Odin. Kies can tell that something is connected, but it just continuously tries to connect. The device does not have an sd card slot, so there is no way for me to add a different rom to it.
EDIT: Kies does not detect anything being connected at all if the device is booted normally.
ElDochart said:
I booted the device into download mode, where it is detected by Odin. Kies can tell that something is connected, but it just continuously tries to connect. The device does not have an sd card slot, so there is no way for me to add a different rom to it.
EDIT: Kies does not detect anything being connected at all if the device is booted normally.
Click to expand...
Click to collapse
Additional update:
By using the calculator app to copy paste numbers, I've gotten the device connected to my phone's hotspot, along with my laptop. Perhaps there is some way to force a file download over wifi? The device shows up in my network places on my laptop, but the folder is empty.
ElDochart said:
Additional update:
By using the calculator app to copy paste numbers, I've gotten the device connected to my phone's hotspot, along with my laptop. Perhaps there is some way to force a file download over wifi? The device shows up in my network places on my laptop, but the folder is empty.
Click to expand...
Click to collapse
If you start kies and select emergency firmware recovery it will ask you to put your phone in download mode and connect it. Does kies recognise it then?
Sent from my SM-N930F using Tapatalk
Problem resolved, I was able to locate a Samsung release 4.0.4 for my device in .md5 format and flashed it with Odin. Thanks for the help.
ElDochart said:
Problem resolved, I was able to locate a Samsung release 4.0.4 for my device in .md5 format and flashed it with Odin. Thanks for the help.
Click to expand...
Click to collapse
Excellent news [emoji106] [emoji106]
Sent from my SM-N930F using Tapatalk
This is a bit of a longer story, but i'll try to make it brief.
I have a samsung galaxy note 3 (SM-N9005).
A few days ago, when I was deleting system bloatware and I must have also deleted some important parts of the system.
My homescreen stopped working and i couldn't see my phone when i connected it to my pc which is running win-10 (more on that later).
Unfortunately i didn't keep any backups, yes I was reckless.
Factory resetting with my default recovery mode didn't help at all.
After some time i managed to install twrp (team win project recovery) and flashed ressurection remix 5.8.5 (unofficial version from Lord_Eko) along with Magisk and the correct Gapps.
Everything is working fine except that I cant see my sim card (thus i can't call or text anyone) and I still can't see my phone when connecting it to my pc.
I wanted to try installing some firmware for my sim card or try flashing stock firmware before my custom rom but I can't, since I have to use bootloader/download mode for that.
I tried using Odin (v3.13 and v3.09) while in download mode, but it can't see my phone. Neither can Android debug bridge when using command "adb device" or "fastboot devices" (it just says list of attached devices and nothing).
Connecting my phone normally doesn't work either. My phone isnt even listed in device manager as an unknown device.
I even tried installing samsung usb drivers, but to no avail. My phone only gets charged from my pc.
I tried all sorts of things i don't even remember now, but none of them helped.
I read something about an IMEI being deleted and when i checked my IMEI through an app it was blank, so it seems to have been deleted.
My battery also keeps draining quite a lot, but that's probably because of how old it is.
I don't know anymore info i can give, so please, how do I get my simcard to work?
Thanks for any help and sorry if I posted this in the wrong section. <3