After dealing with tmobile for over a week, they finally sent me the link to download kies mini and update my Vibrant through that program.
After installing im having an issue, the splash screen that says connect phone shows up, then instantly goes white, but still allows me to click on different spots, im still able to exit.
I know the program is not frozen, I just cant figure out what the issue is. I tried using USB debugging, Ive tried clicking on kies on the cell phone, no help. Any advice would be greatly appreciated, im annoyed that i still dont have this update by now. Thanks.
Root your Phone.
Hello!
A few days ago my phone got wet.
After that I can no longer use the touchscreen. Everything else works fine, including unlocking it using facial recognition.
The phone is a Samsung Galaxy S Plus (i9001), with a replaced screen (Crushed it 6 months ago..).
The phone has been dropped many times, but it always worked fine afterwards.
I've already decided i'm buying a new phone, but I still want to try to recover all my data on the phone (messages and appdata is important to me).
So my question is: Is there some way I can access my files? The wifi is off, and so is 3G. usb is set to mass storage mode, so I can't use kies.
Maybe I can upgrade the rom with something that automatically activates some form of filesharing?
Thanks in advance for any ideas.
Also: Do you think there is still hope to get the screen working? When It is unlocked I see that one of my apps is "selected" so it would seem the touchscreen is frozen - not necessarily defective.
I've read that a factory reset can help with this kind of trouble, but I don't want to do that before I have my files..
Hey gang - I've been traveling for work and just have some crappy slow satellite wifi for access. The phone has been great because I can use wifi calling and all is good.
A few weeks ago my phone crashed. When I rebooted I was at the "touch android to begin" screen. Well... fix permissions and clear caches didn't work.
So next I restored a backup from CWM.
Unfortunately, after that the phone hangs at the initial Samsung splash screen.
Now, stupid me didn't go an a six-month trip with the Android software on my laptop - so I had to wait for my wife to mail me a thumbdrive that has SOC, HOC, drivers, & etc. on it in order to do anything.
In a previous thread from when this first happened, you all recommended I use HOC to flash the phone back to stock. Which now that (yesterday) I got the thumbdrive in the mail, I am happy to do.
My problem comes from the fact that the phone hangs at the Samsung splash screen seemingly no matter what I do... zadig.exe doesn't recognize the phone on the USB port (just "unknown device") and therefore HOC can't do anything (I think?) Furthermore, I can't even get back into recovery or download mode; at least not with the several techniques I've tried so far.
Recommendations? Or am I hosed?
Thanks in advance,
JaimeZX said:
Hey gang - I've been traveling for work and just have some crappy slow satellite wifi for access. The phone has been great because I can use wifi calling and all is good.
A few weeks ago my phone crashed. When I rebooted I was at the "touch android to begin" screen. Well... fix permissions and clear caches didn't work.
So next I restored a backup from CWM.
Unfortunately, after that the phone hangs at the initial Samsung splash screen.
Now, stupid me didn't go an a six-month trip with the Android software on my laptop - so I had to wait for my wife to mail me a thumbdrive that has SOC, HOC, drivers, & etc. on it in order to do anything.
In a previous thread from when this first happened, you all recommended I use HOC to flash the phone back to stock. Which now that (yesterday) I got the thumbdrive in the mail, I am happy to do.
My problem comes from the fact that the phone hangs at the Samsung splash screen seemingly no matter what I do... zadig.exe doesn't recognize the phone on the USB port (just "unknown device") and therefore HOC can't do anything (I think?) Furthermore, I can't even get back into recovery or download mode; at least not with the several techniques I've tried so far.
Recommendations? Or am I hosed?
Thanks in advance,
Click to expand...
Click to collapse
Interesting problem. I have bricked my phone a bunch of times and have always been able to get back to at least "download Mode". The method I use to go to "Download Mode" is With the usb cable plugged into the computer only, power off the phone. If phone wont power off, or stay powered off, pull battery, then put battery back in. Now hold vol down and vol up buttons only, keep holding these buttons as you plug the usb cable into the phone. In 3 seconds the download screen should appear. I hope this helps you get your phone back.
JaimeZX said:
Hey gang - I've been traveling for work and just have some crappy slow satellite wifi for access. The phone has been great because I can use wifi calling and all is good.
A few weeks ago my phone crashed. When I rebooted I was at the "touch android to begin" screen. Well... fix permissions and clear caches didn't work.
So next I restored a backup from CWM.
Unfortunately, after that the phone hangs at the initial Samsung splash screen.
Now, stupid me didn't go an a six-month trip with the Android software on my laptop - so I had to wait for my wife to mail me a thumbdrive that has SOC, HOC, drivers, & etc. on it in order to do anything.
In a previous thread from when this first happened, you all recommended I use HOC to flash the phone back to stock. Which now that (yesterday) I got the thumbdrive in the mail, I am happy to do.
My problem comes from the fact that the phone hangs at the Samsung splash screen seemingly no matter what I do... zadig.exe doesn't recognize the phone on the USB port (just "unknown device") and therefore HOC can't do anything (I think?) Furthermore, I can't even get back into recovery or download mode; at least not with the several techniques I've tried so far.
Recommendations? Or am I hosed?
Thanks in advance,
Click to expand...
Click to collapse
This sounds like a time where a jig would be helpful. Any chance you can have your wife order one, and send to you? http://www.youtube.com/watch?v=D7I4dFX_iJ4
This should put you straight into download mode, and you can then flash.
Thanks, guys. I continued fiddling and got the phone into DL mode.
I also noted that when plugging and unplugging the phone, it would show up in zadig as "unknown device."
I tried to load the drivers on that, but (a) it still shows up as "unknown device" and (b) when I run HOC it doesn't see the phone under the list of compatible devices.
So.... still kind of stuck.
Any more ideas?
Oop. duplicate post
It's been awhile since I've played with the one clicks, but, "serial gadget" is what I remember seeing when I used them.
Right. MORE messing around later and "Serial Gadget" is it.
That said, I still think I have a driver issue. I have tried uninstalling and reinstalling the zadig-recommended drivers for Serial Gadget several times. I also tried manually installing the drivers from Super One Click.
Anyway, now when I load up HOC I get the green <<connected>> at bottom; but then sometimes it wants me to install the drivers (again) and sometimes it gets past that part, but then goes to
Flashing Kernel: 0%
...hangs there for about 10 seconds and then
Failed!
So... driver thing you think?
Thanks again,
If you reboot the phone after the 0% hanging for 10 seconds, does it go to the yellow exclamation mark screen? If so, just reflash again and you should be back to working... both my and my wife's phone always did that when I had to flash a kernel.
That's just another download screen that theraze is describing.
Exacatly. But the alternate download screen always came up after restarting the phone after a 'failed' flash where it stayed at 0% where it was successfully communicating through the cable. That just meant to not break the drivers or unplug anything... just reboot fast and finish up quickly.
Okay - I can definitely try that! It had not occurred to me to try and reboot the phone right then.
Question, though - when I get the "Failed!" Then HOC essentially hangs, when it says something along the lines of "ending session..." and never progresses from there. So how do you "restart quickly?" Because I have to like, close and reopen HOC. I guess I will see if it succeeds at ending the session when I reboot.
I will try it again. Strange though, sometimes HOC accepts the existing driver (I managed to DL the Samsung driver installer) and sometimes it wants to reinstall "WinUSB." does that make sense? Is the WinUSB an acceptable one?
The winusb is the right driver for heimdall, it doesn't like the Samsung driver.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Samsung drivers and the one click drivers clash. Yes, uninstall Samsung completely if you want to use the one click.
Hm. Thanks for that - might be part of the problem.
Dunno what I did differently, if anything, but last night I tried flashing again and this time it went through! I was very glad to see the whole HOC process completed successfully!
So anyway - thanks so much for the help, guys.
Hi,
I have a Samsung Infuse and yesterday when I left it to charge everything was fine, but after I took it out, nothing was working. I mean nothing at all, no Samsung logo, No download mode, no recovery mode, nothing. The LCD or the phone won't start up. I did the basic troubleshooting and the battery and all are fine. I showed it to a mobile hardware repair shop and they said that the hardware is fine and it's a software problem.
Now, since the phone won't even start up, I cannot connect it to windows and hence can't use Odin as well (phone doesn't even go to download mode).
Moreover, I am unable to install the driver on windows since Kies requires the phone to be connected and detected by windows and that isn't happening.
Any suggestions on what could be the problem and how I can fix it ?
Thanks
Hey everyone, I've exhausted all my options (verizon, samsung, friends, google, etc) in recovering my phone. Hoping you can help.
What happened: verizon galaxy S6, stock, unsure if USB debugging was enabled (unlikely but possible, cant remember if I enabled it with this phone or my last one). I woke up and saw there was an OS update that downloaded overnight, and without thinking about it, just began the installation. The next message I saw said "installation failed" or something along those lines, can't remember exactly. After that, rebooting the phone froze on the verizon logo, and would stay until the battery died.
What I tried and what i CAN do:
Get into maintenance boot mode.
Safe mode: no change.
Simulated hard reboot: no change.
Erasing cache: No change.
Odin on phone: able to get into this from android recovery, but no program on my computer has been able to pull files or flash a rom without doing a factory reset.
Verizon wireless update assistant: Recognizes phone but can only do a factory reset, will not recover data.
Samsung smartswitch: same as above
Other details: Definitely not backed up through verizon, google, samsung (yes I am kicking myself for not going through any of these convenient services that were practically shoved down my throat).
Using a macbook, but I can get access to a PC if absolutely necessary.
When I turn my phone on, I have a yellow triangle with an exclamation point, an android with Xs for eyes rotated 45 degrees, and it goes to system recovery. When I reboot from there, it goes to a normal boot, but freezes on the verizon logo and gets stuck there.
I don't give a crap about this phone, but I have pictures from the first year of my daughter's life on it that I don't want to lose, and I was too stupid to back them up. If you can help I would be incredibly grateful. If it makes you pity me more, I've been using an iPhone 4 for a couple of weeks while I tried to sort this out on my own. I don't want to factory reset this and move on if I can save the pictures.
One last thing I tried: heimdall/jodin/flashing a stock firmware. I can consistently load odin mode and get to download mode, but jodin can't obtain the PIT file so I can't go any further.
I appreciate any help. I can just factory reset and move on, but I really don't want to lose the pictures of my daughter if I don't have to.