Hello!
A few days ago my phone got wet.
After that I can no longer use the touchscreen. Everything else works fine, including unlocking it using facial recognition.
The phone is a Samsung Galaxy S Plus (i9001), with a replaced screen (Crushed it 6 months ago..).
The phone has been dropped many times, but it always worked fine afterwards.
I've already decided i'm buying a new phone, but I still want to try to recover all my data on the phone (messages and appdata is important to me).
So my question is: Is there some way I can access my files? The wifi is off, and so is 3G. usb is set to mass storage mode, so I can't use kies.
Maybe I can upgrade the rom with something that automatically activates some form of filesharing?
Thanks in advance for any ideas.
Also: Do you think there is still hope to get the screen working? When It is unlocked I see that one of my apps is "selected" so it would seem the touchscreen is frozen - not necessarily defective.
I've read that a factory reset can help with this kind of trouble, but I don't want to do that before I have my files..
Related
Hello everyone, this might not be a huge problem but it is bothering the heck out of me. So after some extensive research and troubles that I bumped into, I was able to flash CM11 on my AT&T 4.4.2 at that time. Everything was working fine including the plug&pop feature. However, instead of 4 different options that we get in stock LG, there are only 2 with CM11 when you connect the phone to a comp using the usb cord. By accident, I unchecked both of them because I thought it would be safe to unplug the phone. After that, the phone didn't show that pop up whenever it is connected to the comp any more although the phone still showed up in the Devices & Printer list. Therefore, I couldn't do anything like moving music, or rooting, or copying files to the phone. Does anyone have a suggestion on how to solve this? I tried looking at all the settings but couldn't figure out how to enable that option again. Thanks and have a great day everyone.:crying::good:
:good:Hi guys, I just did a reset and everything is back to normal now. Also I'm running CM11 20140509 and everything is working okay except for some battery drain issue (not so serious but definitely noticeable). Keep up the good work guys. :good:
TL;DR - Flashed a ROM designed for N3+ (which is supposed to be same phone) but touch screen is unresponsive now. Need help with SP MDT or editing uboot
EDIT 15. July, 2014.: I've asked a guy from www.NeedRom.com to tell me his LCM driver and touchscreen which are located in factory mode (VOL- + HOME + POWER). He gave me same driver names as mine. LCM driver is RX_5720TM_813a and touchscreen is ili2113a.
I've tried removing the digitizer from my phone (lost warranty, but **** it, i'm not sending it back to china) and when i've entered factory mode again, it said touchscreen: (null).
So it seems that digitizer is properly attached (and should be working?).
Does anybody have a clue what's going on here? I've tried flashing 15 ROMs and NONE fixed the touchscreen. It's fully unresponsive. It doesn't work even if I off/on the screen few times like it worked before.
____________________________________________________________________________________________
Hello everyone, like title says I have unresponsive touchscreen on my Star N9800 phone. It's pretty much a new phone, octa core, quad core GPU, 2GB RAM, 16GB storage, etc.
What I've done is I flashed the ROM designed for Star N3+ (which is supposed to be same phone) but my touch screen is unresponsive ever since then. I've googled and read some articles on xda about SP MDT. It's a tool which can help us choose the display driver we want the phone to run with. I actually ran into a problem when i downloaded SP MDT. I can select the database etc, but when i get to scatter file it just doesn't want to load it. Either it's incorrect name or file type. I've downloaded 3 original ROMs from needrom.com and strangely the scatters seem to be different. But none is accepted by SP MDT. I need someone of knowledge who can teach me where to find uboot and how to edit it correctly. I'm not a linux/android programmer and I really don't wanna get involved into much programming. I understand basic stuff, i can find files on the system, i can edit build prop correctly, remove or edit boot_logo, boot anim etc, but this is a bit more than that. 2
Please share some knowledge with me and please don't point me to google. There's no solution there, i've googled for 3 days now. The last resort for me is to make a post here (and hopefully don't get ignored for spamming because this isn't spam).
My email is: [email protected] - you can notify me here if I don't get automatically emailed by xda.
Thanks in advance.
BUMP
Have no solution but would like to learn as well if anyone can help us...
I had the same issue but gave up and flashed another rom instead.
Flashing another ROM didn't help my problem. Well partially it did. I've flashed 2014-1-7 original N9800 ROM and the touchscreen only needs 1 or 2 off/ons till it starts working. I'm kinda fine with it because it was completely unusable. Flashing drivers with SP MDT didn't really help. I've tried flashing RX5720TM_828A (from N3+ ROMs) and LP057APK (default in N9800 ROMs) and RX5720TM_813A (2nd in N9800 ROMs), and so far my touchscreen works only with 813A LCM driver. When i turn off the phone and then hold VOL- & POWER & OFF/ON it goes to factory mode. There i clicked version and it showed that 813A is installed as LCM driver, BUT touchscreen says (null). Could it be that my digitizer is no longer connected or what? Cuz it sometimes works correctly without turning the display off/on at all.
EDIT 15. July, 2014.
EDIT 15. July, 2014.: I've asked a guy from www.NeedRom.com to tell me his LCM driver and touchscreen which are located in factory mode (VOL- + HOME + POWER). He gave me same driver names as mine. LCM driver is RX_5720TM_813a and touchscreen is ili2113a.
I've tried removing the digitizer from my phone (lost warranty, but **** it, i'm not sending it back to china) and when i've entered factory mode again, it said touchscreen: (null).
So it seems that digitizer is properly attached (and should be working?). It is possible that digitizer is detected but not working?
Even if i boot into recovery, screen doesn't react to touches.
Does anybody have a clue what's going on here? I've tried flashing 15 ROMs and NONE fixed the touchscreen. It's fully unresponsive. It doesn't work even if I off/on the screen few times like it worked before.
Apparently it's the calibration which ****ed up my phone. I'm now trying to figure out how to calibrate the screen through CWM.
ever find a solution?
i have a star n9800 too. suddenly i have been having all of the same issues, but here is the kicker: i never flashed anything but the stock rom that came with my phone, which was the same as kitkat version available on needrom.com. i have tried full factory resets, i have restored my original backup, none of it has fixed my phone. in factory mode, everything tests fine, but even when i launch in to TWRP, about 75% of the time, my touch doesn't work. i am wondering if one of the cables inside has come loose or something, but it is so intermittent that i find it doubtful.
hopefully you have found a solution that you can share with me.
Touch screen sometimes not react
AlexZap said:
i have a star n9800 too. suddenly i have been having all of the same issues, but here is the kicker: i never flashed anything but the stock rom that came with my phone, which was the same as kitkat version available on needrom.com. i have tried full factory resets, i have restored my original backup, none of it has fixed my phone. in factory mode, everything tests fine, but even when i launch in to TWRP, about 75% of the time, my touch doesn't work. i am wondering if one of the cables inside has come loose or something, but it is so intermittent that i find it doubtful.
hopefully you have found a solution that you can share with me.
Click to expand...
Click to collapse
-------------------------------------------------------
I have exactly the same issue and same signes, the phone itself is working good, ring for incomming phone but the the screen is not reacting i cannot take the call, it receives emails.
Did someone have a solution please let me know... thanks
My phone is star N9800, 2Gb memory and 16 Gb storage, android 4.4.2 originaly installed and was working fine during 9 months
Touchscreen - hardware failure
Hi,
I am wondering if you may have experience and be able to help me with my Star N9008 phone which has has had its touch screen stop working while I had it in storage for about 3 months.
Very well stored, no shock, no humidity. I keep it with my laptop backpack as a spare in case my everyday phone fails.
Today I powered it up to make sure battery was good (found it good at 95%) and update applications, etc. Basically, just checking it was still good to serve as a backup should I need it.
Thing is, I found the touch screen is completely unresponsive. Connected a mouse to it and verified all was working good, did up the updates, etc.. using the mouse. Reboot and boot into service mode and restore menu. Also, no touchscreen response (I use TWRP). Thus, it must be hardware failure.
From experience, would you know what would cause this, and how to resolve?
Thank you.
So, its been a while.
So, it's been a while. I still have the phone in storage and pity it doesn't work...
I haven't bothered opening up the phone if I don't know what to really try and also risk damaging it.
Also didn't bother ordering a new digitizer to replace as it's economically unviable.... the phone is now really getting behind as new tech is further evolving, so I do unfortunately see it going in the rubbish soon (along with two brand new batteries I had purchased for it just before it died).
Has anyone been successful at finding the culprit?
In my case, it was fine and very well stored... so I don't really have an explanation other than the phone possibly having a 'countdown timer' to break it... (yeah, a bit too conspiratorial, lol)
I did not find a solution yet , phone still sits in storage
First time poster, I apologize if this post is a mess.
I recently dropped my Droid Charge down a flight of stairs. The phone itself still seems to work - I can boot it up, it plays all the proper sounds, and my 7pm alarm even went off today (hadn't had it on to test that before), but the screen is completely dead.
I've already upgraded to a Galaxy Note 3. I had a backup with SMS Backup & Restore from April; same for my Checkbook app - these are the two apps I'm most concerned about. I'd like to get the additional data since April 22.
My Charge is rooted, though I got a lot of walkthrough to do it - I also did the root over two years ago.
I have these links in the chatlog with the friend who helped me root, if that helps at all:
http://forums.androidcentral.com/dr...charge-windows-drivers-w-direct-download.html
http://www.mediafire.com/?yn37uc4z3cx3bl6
http://rootzwiki.com/topic/10515-odinall-in-oneep4d-gingerbread-236-w-cwrimo-kernelrooted/
http://forum.xda-developers.com/showthread.php?t=1172182
Problem: USB debugging was turned off when I dropped the phone. I didn't know any better until I'd already broken the screen. I've tried MoboRobo, MyPhoneExplorer, and Samsung Kies, and nobody sees the phone. It beeps when plugged in, and with Kies the hard keys light up about ten-twenty seconds later, but that's the furthest I've gotten.
I'm willing to boot to recovery and use adb/command prompt/whatever, but I can only find these instructions for other phones, and I'm worried that if I use the wrong phone's menu instructions I'll end up wiping it instead of booting to recovery. I'm also not too clear on if ADB is a different build for different phones... this is my first time doing this.
I don't have a mini-HDMI cable but if that's the better solution I'll get my hands on one.
Any help is appreciated, thank you!
Hey guys, let me just start off by saying I have spent almost 8 hours straight today trying to figure this out and dig myself out of a hole I've created for myself, that being said, I'm going to try and be as detailed as possible so you guys know EXACTLY where I am and what I've tried. This post looks long but that's because it is. It's pretty much my entire day's worth of trouble typed out. So just bare with me and see if you guys can help me out here!
I have a T-Mobile Galaxy S4 model: SGH-M919 it has Android 4.4.2. Now on to the problem: I've had this phone for almost a year now and a few months ago I rooted it. Did a simple Youtube tutorial and used Odin to do the work and everything worked out fine. A couple months down the road (yesterday), after using the phone like a teenager, downloading apps and cluttering it up it started to slow down and not run some apps. After thinking about it I decided to factory reset it. All of my contacts, photos, and videos were backed up on Google so I thought "why not?" Well, this is where $#!% hit the fan.. being rooted then factory reset, right before the phone came online it had me answer two questions about the root. Something to the effect of "Do you want to keep root? (This option is not reversible)" I thought since I wasn't using the features I originally rooted the phone for I figured nah just get rid of the root. So the phone did its T-Mobile boot up and started the Initial setup.
Everything up to to this point was fine until I wanted to log in to my Google account during the setup. Please understand that where I am I have full 4G LTE coverage and have access to a pretty fast and sturdy wifi connection. Well, when it came to the google sign in I entered my email and password and it came up with a message reading "Can't Sign in - Can't establish a reliable connection to the server" (believe me i wish that was the only issue) so after reading that, I thought I'd try with my wifi.. nope. Same thing. Since neither my 4g or wifi worked I thought it was Google's servers so I tried again this morning, same thing. (keep in mind at this point i think my phone isn't rooted anymore.) I call the t mobile store and they give me a technical support number, so I call it and I tell them i cant sign into Google. The gentleman told me he cant do anything because he can tell my phones been rooted. Only thing he suggests is to contact Google, well, the customer care number just tells you go to google.com/support and there's nothing there about my problem.
This is where I dig my hole even deeper. I tried another factory reset and up in the top left corner i still see that root text. Even the rooted android symbol pops up before the Samsung logo or t mobile. Since I saw that I thought "ohh it just didn't get unrooted all the way." I look up ways to completely remove a root and a lot of them require plugin your phone into the computer and using Odin to flash a stock firmware on to the device. I went to plug my phone into the usb port but my computer didn't recognize the usb device, having experienced this a long time ago I searched around for the latest Samsung usb drivers and I installed those. Device still isn't recognized. Let me just note before people tell me to use MTP mode or Developer tools> usb debugging or connection mode.. The only thing that happens when plugging my phone via usb is the phone starts charging and my computer makes the trumpet noise like something is plugged in. Other than that, there is NO notification of it being plugged in. The reason i stress this is because I called Samsung technical support at this point and the guy (not gentleman) treated me like a 5 year old and ran me through all of these options after i told him I already did everything he was suggesting, including downloading Samsung Kies 3 and having it install the drivers. It does not pick up the device either.. at this point I looked up ways to remove the root without the computer. I found out you can just go into the root app "SU" or something and theres a remove root option. I jumped on that opportunity and had it removed. I restarted the phone and all the problems still persist, it even still has the root text on the top left when you factory reset it again. However now, even if you factory reset and select the option "keep root," thinking it would bring back the"SU" app it does NOT.
So lets recap. I have a phone that thinks its rooted and even appears rooted to t mobile but doesn't have any of the root apps or privileges or capabilities to fix my Google log in issue (like the host file in filemanager). And I can't re-root to get that app back because none of my 3 usb ports, 3 different usb cables (one being the cord that came with the phone), or any of the ports/cables on someone else's computer will recognize the darn thing to work on that way! I have all these issues that are supposed to fix each other but I can't do any fixing because they cancel each other out too... I'm at a dead end.
In case this isn't the right forum/website/thread/post area etc.. I have this whole message saved in Microsoft Word document so I can repost it anywhere you guys might suggest better results. Any help/advice will be much appreciated.
Today my phone felt down totally flat. The screen hits the floor directly.
It carries a protector above the screen, and apparently it is the only part that broke down
The screen seems to be in perfect status.
But the problem is screen is not working. None light is shown, and no reaction is performed.
If I touch the power button during 20s, the phone vibrates and it seems to be restarted.
When I connect the charger, the led works fine. Although no sound is played.
I would like to repair the phone, but at least (and this is important) I need to download all the data to the PC.
Question: is there any way to access to the data in the phone without having the screen available?
PHONE: MI9
OS: MIUI12.5
Yolco said:
Today my phone felt down totally flat. The screen hits the floor directly.
It carries a protector above the screen, and apparently it is the only part that broke down
The screen seems to be in perfect status.
But the problem is screen is not working. None light is shown, and no reaction is performed.
If I touch the power button during 20s, the phone vibrates and it seems to be restarted.
When I connect the charger, the led works fine. Although no sound is played.
I would like to repair the phone, but at least (and this is important) I need to download all the data to the PC.
Question: is there any way to access to the data in the phone without having the screen available?
PHONE: MI9
OS: MIUI12.5
Click to expand...
Click to collapse
If you did not USB debugging enabled in system settings before the screen broke, you will not be able retrieve your data. Now that your screen is broken, there is no way for you to enable USB debugging in order to retrieve your data.
Your options are:
1) repair the screen so you can retrieve your data.
2) forget about your data and get a new device.
Live and learn. I keep USB debugging enabled on all my devices for this very reason.
I found that I can retrieved my data thanks to custom recovery. I had a bit of lucky because with adb, data can be retrieved trhough custom recovery.
Usually, I have USB debugging activated but this time it was not activated as from last ROM update it is deactivated by default.
Now, I will deassembly the phone just to understand which is the root cause as touch sensor is working fine. So I need to understand if the problem comes from the screen or in the worst-case from connectors or PCB. In this last case I would need to get a new device, and I would like to keep this one for a few more time, even when there is no more OS update.
Yolco said:
I found that I can retrieved my data thanks to custom recovery. I had a bit of lucky because with adb, data can be retrieved trhough custom recovery.
Usually, I have USB debugging activated but this time it was not activated as from last ROM update it is deactivated by default.
Now, I will deassembly the phone just to understand which is the root cause as touch sensor is working fine. So I need to understand if the problem comes from the screen or in the worst-case from connectors or PCB. In this last case I would need to get a new device, and I would like to keep this one for a few more time, even when there is no more OS update.
Click to expand...
Click to collapse
I was going to suggest that but wasn't sure you would actually be able to install it or even if a custom recovery existed for your device since you didn't post what model you have. Also, if you had needed to unlock your bootloader to flash a custom recovery, unlocking the bootloader would have wiped your data.
Yes, you were lucky, most users in this condition are screwed out of recovering their data.