Related
I'm a new convert to the Touch Pro from the Universal. So new, in fact, I'm not allowed to have it until Christmas!
However, I took delivery of my HTC (i.e. non-branded) Touch Pro yesterday, and was allowed to charge it up/switch it on to check that it was ok. While playing with it, just the once, the screen kinda faded out and went a dark blue-black colour. Similar to when you see an LCD screen that's had the power taken from it.
It all came back as normal when I switched off and on again.
I'm wondering whether this might just be a software problem, and a new ROM will sort it, whether it's a hardware problem that I'll need to get RMA'd, or whether it's just one of those unlucky one-off problems that you sometimes get. It's not something daft like I did a swipe that turmed on a key lock or something, is it?
I'd say it worked fine after the initial setup procedure for about 10 minutes until I swiped and it went black, and then didn't show a problem for the other 20 minutes I played with it for.
Cheers,
Steve.
Firstly, my screen does not show visuals. I can still touch the screen and make things happen, but it is just a back-lighted black screen. I have answered calls on it and such. Basically I'm returning it and getting a new one.
Since I am getting a new one, I want to see if anyone ever heard of this problem and to see what the cause of it is, for prevention purposes.
I didn't get it wet (the white sticker in the back is still white.) Though I have flashed PROven ROM to it a couple months ago (it's a great ROM by the way), but could that have messed up my screen?
I also wanted to know since I can't see the screen, would I have to, for warranty purposes, (blindly) reflash to the Stock ROM?
Thanks in advance!
Yeah, you probably oughta return it to stock configuration (good luck on that!). If you're really lucky, that might even fix the problem. Have you done a hard reset yet? Might be worth a try, although it certainly sounds like a hardware problem.
Sounds like the flex cable has gone bad
Exactly same thing happened to me this Tuesday. Luckly I backed up info to memory card using PimBackupV2.8 with remote control software on my PC. With the remote contol tool, I could see everything as if on my phone and icons are clickable.
Hard reset did not fix the issue. I then flashed the shipped official ROM and stock SPL for warranty purpose. Will send the phone to them today for repair.
mine also like that..
from vodafone also..
the things that make me panics is the phone become hotter and hotter.
asdiqa said:
mine also like that..
from vodafone also..
the things that make me panics is the phone become hotter and hotter.
Click to expand...
Click to collapse
Summer is coming...
Sometimes they make updating phones too easy......
The back of my phone often gets hot I have to use the edges to hold it even though it was not a hot day and it is in my pocket.
blank screen
ya so my screen is blank white
but everything else works
i've heard something about this being a faulty "flex cable"
how can i fix this?
thanks so much for your help
how do i fix this???
did you eventually find out how to fix this/???
u ever end up fixing that? how?
thankss
Mine was still in warranty so I rang Vodafone. They sent me a special delivery envelop the following day. I sent it back to them. The following day I got a text message from them saying they got it and was working on it to fix the fault. The next day received another message saying the device was on the way back to me and I should receive it the following day.
Actually they sent me back a replacement
So.. basically.. is this a faulty flex thing?
I had the same problem for the last week until today i was about to buy another one since i dont have any warranty for this one.. I searched google and saw somebody say that just putting a business card between the keyboard and the lcd and then slide it and it works so far
hope it helps everybody
Ack! my Fuze, which I got off eBay a few months back, just went black too.
I'm not exactly sure whether it's the LCD or the flex cable, but the fact that the D-pad backlight also has become intermittent makes me think it's the cable.
So has anyone attempted the flex cable repair themselves? I see you can buy the cable for around $40 and the LCD for around $80 from Hong Kong.
Maybe this is a sign I should just get an Android device.
eelpout said:
Ack! my Fuze, which I got off eBay a few months back, just went black too.
I'm not exactly sure whether it's the LCD or the flex cable, but the fact that the D-pad backlight also has become intermittent makes me think it's the cable.
So has anyone attempted the flex cable repair themselves? I see you can buy the cable for around $40 and the LCD for around $80 from Hong Kong.
Maybe this is a sign I should just get an Android device.
Click to expand...
Click to collapse
Did you end up fixing it? I have the same problem.
same thing happened to me Twice.... in my sleep overnight. I LOOOOOOOOVe my raphael but man this was the last straw
This maybe of some help for those of you with blank screens. I bought a Touch Pro on ebay that had a very dark screen, occasionally you could just make out some icons being displayed. Using Mymobiler showed that the basic system was working, as was the touchscreen. Other symptoms were that the camera would not work and the keypad lighting was intermittent. Sometimes on connection to Mymobiler a dialog box would come up saying there was an error with Microp?!?
Despite cleaning all internal connections and ensuring they were correctly and securely made the problem remained. I then noticed that the small camera used for video calls (in a socket on the main flex cable) looked very dirty and corroded. I removed the camera module and, using a fibreglass brush, cleaned the contacts on both the socket and the camera module. These were very badly corroded with verdigris.
On putting everything back together I was most surprised to find the screen was now working, as was the main camera. Unfortunately the ROM that is loaded doesn't seem to have any facility for checking the front video camera. There are still problems with sound - both the loudspeaker and the headphones seem to be dead and I have not had the opportunity to test GPS, Wifi, bluetooth, buttons, etc, however I will keep working on it.
Hope this is of help to someone.
Hi everyone, this is my first post here. Thanks in advance for any help that you folks can provide.
I've had the TF101 for about six months now, and it's been fine. I was using it yesterday on the train and all was good, but when I got home and took it out of my bag it didn't seem to start up. I thought it might have been a battery issue, so I let it charge overnight. Tried starting it up this morning and I got the same results. So I started looking in to other issues.
The tablet is definitely starting, adb will recognize it in its list of devices, and if I plug it in to my tv or desktop monitor w/ HDMI, I can see and interact w/ the Transformer UI (of course this is kind of painful since I have to do some guessing about where to put my fingers).
I had rooted it using rebound821's scripts and directions here, so tried an unroot to see if that was the problem. I ended up with the same results.
Does anyone here have any insights as to what the problem may be? I'm hoping to avoid sending it back to ASUS, so I'm fine w/ opening it up to look for loose cables.
So I thought that brightness might be the problem. Maybe it was set to 0 and I just wasn't seeing anything on my screen. Sadly, that doesn't seem to be the case.
I tried setting brightness at the path below to to 0, 50, 100.
/sys/devices/platform/pwm-backlight/backlight/pwm-backlight/brightness
Still no luck.
Has anyone encountered anything remotely similar to this (even if similar is just a dead screen)?
There have been others with dead screens reporting what you are, at least I have read a few reports, I think they just had to get them RMA'd, I don't recall anyone 'fixing' a dead screen, especially if you still have adb and touch working then the screen itself and backlight seem to have broken completely- some have reported the backlight dying and thinking the screen was broken, but it was just the backlight (I guess in bright light they could see pixels working, but couldn't make out what was on the screen without the backlight). I still think they had to get it repaired either by Asus or by someone who was capable of doing internal repairs with replacement parts..sorry for your luck
Looks like I'll have to send it back. I took it into the brightest light I could find and couldn't see anything at all. Guess it's the screen and maybe the backlight too. I'm pretty disappointed this happened, the only thing I can think of is that the bag I had it in was hanging from the chair in front of me on the train and it was swaying a little, and that shouldn't be enough to dislodge a connection. Either that or just some freak hardware failure. Still, I guess it's not that common of an occurrence. Thanks for the reply, I'll slink off and try to get in touch w/ Asus now.
I have experience same
My TF101 broke in the same way, screen blank. Conected to tv I`ve got image digital touch work. I shut down my TF101 normaly and screen never go back to live again. Tablet was in a protective bag (when I trave by car), just no reason for not working ( no problem at screen, previously, screen perfect - no dead pixels)
Did you guys get this resolved? I had the EXACT same thing happen yesterday. Was working just fine. Put it in its sleeve, into a protective case, into a briefcase, got home and dead.
HDMI works. I tried to call Asus but they say i'm out of warranty.
Thanks in advance.
Must be something wrong with the connections that it decays over time. I've had mine since October last year and its been fine except for today when I brought it home it wouldn't work.
I was able to fix it though. I held it vertically with the bottom edge down and tapped it firmly on my desk a couple of times. The screen came back on. There is a strong possibility that this will happen again and my tap fix won't work, but it's working at the moment
Asus Transformer screen
elementalfire23 said:
Must be something wrong with the connections that it decays over time. I've had mine since October last year and its been fine except for today when I brought it home it wouldn't work.
I was able to fix it though. I held it vertically with the bottom edge down and tapped it firmly on my desk a couple of times. The screen came back on. There is a strong possibility that this will happen again and my tap fix won't work, but it's working at the moment
Click to expand...
Click to collapse
I had exactly the same problem discussed in this thread. I was also able to bring the screen of my TF101G to life by tapping it firmly on my desk with the bottom edge. It works for now. But it is certainly disconcerting to know that some connection in this rather expensive gadget are loose and all this can happen again. I guess I will not carry my transformer around any more - just leave it at home...
spokey said:
My TF101 broke in the same way, screen blank. Conected to tv I`ve got image digital touch work. I shut down my TF101 normaly and screen never go back to live again. Tablet was in a protective bag (when I trave by car), just no reason for not working ( no problem at screen, previously, screen perfect - no dead pixels)
Click to expand...
Click to collapse
Same problem here had my unlocked bootloader tf101 for awhile now, one of the first ones out... had a great life gave it to my girl when i got the transformer prime and the screen just went out yesterday, still goes in apx mode and still recognized by computer, screen just straight up died, think it's too late for a manufacture warranty, maybe ill look but think it's gonna be no dice... sucks obviously something in the design to make this happen to so many of them...
My TF101 appears to have a dead screen. I am rooted and running Revolver Custom Rom. When connected to my pc, I am able to recognize my device. My screen will not turn on so I cannot use recovery to go back to stock. I am set up to use ADB, however, I am not very knowledgable with ADB. I am convinced I have a bad screen and I am still under warranty. Is there a way to return the TF101 back to stock using ADB? If anyone can point me in the right direction, I can probably figure it out. Otherwise, I may just try and replace my screen and see how that works out. Thanks for the help.
My backlight died on Tuesday. Similar situation of working in the morning, headed into work with it in my bag, no brutal knocks or anything but one jolt just must of finished it off after a year and 2 weeks abuse (yes 2 weeks out of warrenty).
Going to attempt to take it apart this afternoon and play with the ribbon cable as reseating it has solved quite a few peoples problems.
Woo! It worked! Very happy chappy.
Sent from my SK17i using Tapatalk 2
Same thing happened too me, first time i sent it to service, but last time i opened it myself and pushed the connector for the screen thightly in place.. worked nicely
Sent from my Transformer TF101 using xda app-developers app
Screen goes derp
I don't know if I have the same problem or not.
Backstory: I own a Transformer TF101 that I got for my birthday from my girlfriend. It was meant for travel and bs'ing around at home. Took it into work and quickly realized that I could use this for work. That went over so well that the rest of the office became intrigued. Once these came on sale on groupon, the office manager went all in on 10. These are all refurbished transformers with docks.
They have all been handed out and I now have a transformer for home and work. Kind of nice...but I do a lot of site observation so using my personal transformer was a risk that I had to take all on my own (survived a 5' fall off of a parapet wall already).
The problem: From the first 5 minutes that I had the thing, the transformer screen went blank. I opened up google play to download a few apps that I could use for work. Scrolling down I saw some choppyness which I considered the processor/memory having issues loading everything on the screen. Before I knew it - boom blank screen. Rebooted and the loading screen stays on for 2 seconds before the screen goes blank. I can tell it's working because it plays a sound at start up. I can also tell the screen is lit up (it's like it's showing a grey screen because it can't show true black colors). If I hit the power button again it goes completely black. I hit the power button again and the screen flashes to the lock screen and immediately goes blank again. I could do this over and over and over again.
Anybody having the same problem? It's refurbished....I'm guessing apparently I got the dud.
I ran into pretty much the same problem. One morning, the tablet screen would just not turn on. Sometimes, it came on and immediately shutdown, but it is still on the "On" mode. Hit the power button again will bring it to the off mode. Toggle it one more time, sometimes, will turn on the screen a off again. I was able to get it back to work with a factory restore. However, it has the following problems.
1) As soon as I adjust the brightness, the screen will go off again. And there is nothing I can do to bring it back except another factory restore.
2) The screen will flicker (and sometimes produces some clicking sound) when charging with the screen on.
Looks like my TF101 is having same issue, screen gone off suddenly (hdmi shows up in TV fine)...I am going give a try on reseating the cable hoping it resolves the issue.
leonpr, is there some tips/things I have to make sure before attempting this. I found a guide here and another youtube video on this issue as a reference...
Thanks..
Screen won't turn on unless factory reset "fix"
My girlfriend has an ASUS TF101. If the brightness goes up to 60%, the screen is blanked (no backlight either) and the only way to get it to turn back on again is to hard reset. This coincidentally happened at the same time as an update from ASUS. After lots of Googling it does not appear to be related. I was hoping it was and installed several custom ROMS which all experienced the same issue.
As a temporary work around, until I get the guts & the money to be able to replace her tablet if I break it, I found and installed AutomateIt. I set a trigger so that when the screen is turned off, the brightness is set to 50%.
Why trigger when the screen is off instead of when the screen hits above 59%? If you have this same problem, hold the brightness and go all the way until the screen blanks and then still holding your finger on the screen, move it all the way to the left and you will notice that the screen did not come back on. Press the power button once to turn it off and then again to turn it on and you will see the screen at the lowest brightness setting.
So, with the trigger in place, if you accidentally (or one of your rotten kids intentionally:angel raises the brightness above the threshold, simply press the power once to turn off the screen and then press it again to turn the screen on.
Just a note, I ended up installing AutomateIt Pro, Available for $1.60 from the Play Market. The free version works fine, but my girlfriend has been struggling with this issue for a couple of months and after so many hard resets, the little app is more than worth the money.
Have you tried Power + Volume Down for 15 seconds, and then leaving it alone for one minute? It will cold boot. Try that and it may work. Just saying; Hope it will help
Sorry for the necro-bump but here's the actual solution.
Problem: The video cable inside the Transformer comes loose and just needs to be pushed back in.
I can't post a link since I don't have 10 posts yet so just search youtube for the following key words:
blank or no display issue on the asus transformer - fix
The user who posted the video is DoCWaSaBe
Tokyudo said:
Sorry for the necro-bump but here's the actual solution.
Problem: The video cable inside the Transformer comes loose and just needs to be pushed back in.
I can't post a link since I don't have 10 posts yet so just search youtube for the following key words:
blank or no display issue on the asus transformer - fix
The user who posted the video is DoCWaSaBe
Click to expand...
Click to collapse
Just fixed my blank display problem on a TF101 which is well out of warranty. Here is the link. I found the connector loose after dropping my TF101.
Thanks!
Fix lasted for a few days, now backlight dead, tried all cables again. No joy . I hate intermittent faults so ordered a Samsung Galaxy TabPRO 10.1.
My Asus tf300t screen somtimes start to have lines going from top to bottom all across it, sometimes by itself, without me touching it. Usually this is after being on for a while (20 or so minutes). It is on 4.2, I have the keyboard dock. The tablet is only 5 months old. (course friend bought it in the US for me, I am in argentina, so warranty is a little hard to do). Screen fills with lines that go from the top to the bottom, making it unusable. Touch still responds as the lines move when I slide my finger as if changing home screens. It does this after a small while being on. If I leave it for 30 minutes, then it starts to work ok for a while, then starts again. All apps installed from google play only. Unrooted locked bootloader latest official Asus updates installed.
malystxy said:
My Asus tf300t screen somtimes start to have lines going from top to bottom all across it, sometimes by itself, without me touching it. Usually this is after being on for a while (20 or so minutes). It is on 4.2, I have the keyboard dock. The tablet is only 5 months old. (course friend bought it in the US for me, I am in argentina, so warranty is a little hard to do). Screen fills with lines that go from the top to the bottom, making it unusable. Touch still responds as the lines move when I slide my finger as if changing home screens. It does this after a small while being on. If I leave it for 30 minutes, then it starts to work ok for a while, then starts again. All apps installed from google play only. Unrooted locked bootloader latest official Asus updates installed.
Click to expand...
Click to collapse
This usually happens when the LCD itself is damaged. In such case, however, it WILL always display lines, and never goes back to normal. I'd suggest that you open the back cover and reseat the LCD cable at both ends. While it's plainly accessible at the LCD's end, the motherboard's end is tucked under the copper heat shield. You want to be very careful lifting up just that part of the shield If you don't want to break the warranty seal. In fact I don't know if it can be done, but good luck.
graphdarnell said:
This usually happens when the LCD itself is damaged. In such case, however, it WILL always display lines, and never goes back to normal. I'd suggest that you open the back cover and reseat the LCD cable at both ends. While it's plainly accessible at the LCD's end, the motherboard's end is tucked under the copper heat shield. You want to be very careful lifting up just that part of the shield If you don't want to break the warranty seal. In fact I don't know if it can be done, but good luck.
Click to expand...
Click to collapse
I will try that if it comes back.
Update: I did the hard reset mentioned on the transformer forums (turn off tablet, hold volume down and power until text appears in upper left. Seleft with volume down the android, and hit volume up to select him, forcing a cold reset without wiping data). This seems to have fixed the problem until now, indicating a software problem. Anyone ever heard of a graphical glitch like this in android caused by some software problem? (again, all apps installed from goole play only, and even then established and recognized developers only, un rooted un modified stock asus rom)
Have you tried going to system -> developer options -> disable hw overlays
Note after each reboot you'll have to set it again.
Sent from my TF300T using xda app-developers app
Solved thanks all
Sent from my Galaxy Nexus using Tapatalk 4
Lines on the screen ASUS TF300T
malystxy said:
Solved thanks all
Sent from my Galaxy Nexus using Tapatalk 4
Click to expand...
Click to collapse
Hi malystxy, i'm also from Argentina and had the same problem too! Looks like ASUS doesnt like us
I see all lines on the screen but the hdmi works fine. Also touch works but i cant see what i'm touching!
Does the hard reset works for you? I tried it a few times but the problem keep returning.
Thanks.
Eugenio
Has anyone come across this before? I was watching a video on MX Player not too long ago, and it seems to have resulted in a permanent colourful static for the phone.
I can't really tell if it's doing anything, but when I go through the motions of resetting it or booting into bootloader, the screen does not change at all.
Interestingly the volume buttons are still working, and if I press the area of the screen where I think the buttons are (e.g., the back/home/programs buttons) I get the right vibrations. Which leads me to believe my screen is broken, and that it's a hardware fault. I'm hoping pretty hard this isn't the case, as my phone is only two months old and it was a replacement for a 6 month old Nexus 4 which had stopped charging.
Anyone come across this before? I'm hoping there's a kind of solution somewhere out there... To make matters worse I bought this phone via a parallel importer AND I'm currently overseas and won't be back till the end of January.
Sigh. Photo of screen is as attached - please forgive the terrible quality as I had to use my laptop webcam.
Thanks in advance, everyone!
jono_nz said:
Has anyone come across this before? I was watching a video on MX Player not too long ago, and it seems to have resulted in a permanent colourful static for the phone.
I can't really tell if it's doing anything, but when I go through the motions of resetting it or booting into bootloader, the screen does not change at all.
Interestingly the volume buttons are still working, and if I press the area of the screen where I think the buttons are (e.g., the back/home/programs buttons) I get the right vibrations. Which leads me to believe my screen is broken, and that it's a hardware fault. I'm hoping pretty hard this isn't the case, as my phone is only two months old and it was a replacement for a 6 month old Nexus 4 which had stopped charging.
Anyone come across this before? I'm hoping there's a kind of solution somewhere out there... To make matters worse I bought this phone via a parallel importer AND I'm currently overseas and won't be back till the end of January.
Sigh. Photo of screen is as attached - please forgive the terrible quality as I had to use my laptop webcam.
Thanks in advance, everyone!
Click to expand...
Click to collapse
Only time I've seen something like this was when my integrated graphics card on my desktop overheated, everything still worked, but colorful static everywhere. I'd let it cool down for a while, chances are it was pretty hot when it did that, and see if high temps might make it happen again.
I just had the same thing happen. Phone had been in my pocket and I had just taken it out to check the time maybe 10 minutes before it happened. The only difference with mine was I bumped into a table and hit the phone in my pocket. It does have a case on it and there is no sign of damage at all such as a cracked screen or anything. The static only lasts for a few seconds and thats right after I force it to reboot. After that it just goes to an all black screen. My LED indicator light is still flashing at me telling me I have an email though so I'm not sure what the deal is.
Were you able to resolve this issue? I too just experienced this issue as well and my phone is currently unusable. Thanks!
Do a full wipe as in wiping the entire phone and making it as if you just got it out of the box. if it persist RMA
Sent from my Nexus 5
Hi, I broke my screen (really bad smash) and had have this static on my new screen. The new screen was apparently fully tested. When using the slim port i can display on my TV and the digitizer works fine, its just this same colour static on the handset. I am now waiting for a replacement USB flex (it was a bit bent in the break) and i expect the new USB flex will fix it. If not then its a bad screen.
Will post the results when i get the parts
Fixed!
Hi,
My new USB flex arrived today. I installed it and found my screen is working perfectly.
The first pic is the same colour static that the op had.. Second one is the USB flex board / ribbon. Ebay for 20 Euro. Please remember that USA users are LG D820 and Europe/rest of works LG D821. I think its important for this part as the aerials connect here ans they are different in USA.
Good luck everyone
zeebo1111 said:
Hi,
My new USB flex arrived today. I installed it and found my screen is working perfectly.
The first pic is the same colour static that the op had.. Second one is the USB flex board / ribbon. Ebay for 20 Euro. Please remember that USA users are LG D820 and Europe/rest of works LG D821. I think its important for this part as the aerials connect here ans they are different in USA.
Good luck everyone
Click to expand...
Click to collapse
Hi,
sorry for reopen the topic but I really need to know if change de USB flex solve this problem
thanks
Static screen and freezing
Hi All,
Need help here with my 6 month old Nexus 5. It has been pretty good with no issues but since last evening, it started behaving weird. The chronological events are as follows
1. While browsing on Chrome some websites were not scrolling intermittently. This was only in the browser.
2. After about 10 mins of the above behavior the entire phone froze and didn't release itself. I had to force reboot by holding the power button down for about 10 secs. When the screen came on, it was the static screen
3. I again pressed the power button a couple of times but no use. Held it again for 10 secs, then phone rebooted and everything was fine.
4. Continued to use the phone and everything was normal until this afternoon, when the phone again froze while browsing a website
5. Since then the phone screen shows the static and if I press the power button once, the screen switches off and press again the screen comes on with the display showing properly. I can now only perform one touch which is registered and the screen freezes. If I switch off and on again the next screen / action is shown which is the action I did in the previous touch. Every time it registers one touch and I have to switch off and on again to see the next screen. Sometimes the phone just shows static and I have to wait a few seconds (30 sec) before using it again.
6. If I make a call to my phone, I hear one ring and then it is busy tone like I've cancelled the call. However the phone does not show the incoming call.
My phone has been intact and is well protected with screen guards and case. There is no physical misuse / abuse of the phone. I managed to shut down the phone and enter recovery. Here as well it only registered one touch, though the phone was processing and moving the next step. I somehow managed to initiate a factory reset through the settings, but no use.
Now in about 2-3 hrs the phone has become completely useless. I'm uncertain what the problem is, all my touch inputs are registered and processed. The screen just doesn't refresh to the next and requires a power off/on. I picked up this phone in the US and now in India. So I can't RMA the phone and I don't have warranty for this in India.
Any suggestion will be greatly appreciated.
Madzy said:
Hi All,
Need help here with my 6 month old Nexus 5. It has been pretty good with no issues but since last evening, it started behaving weird. The chronological events are as follows
1. While browsing on Chrome some websites were not scrolling intermittently. This was only in the browser.
2. After about 10 mins of the above behavior the entire phone froze and didn't release itself. I had to force reboot by holding the power button down for about 10 secs. When the screen came on, it was the static screen
3. I again pressed the power button a couple of times but no use. Held it again for 10 secs, then phone rebooted and everything was fine.
4. Continued to use the phone and everything was normal until this afternoon, when the phone again froze while browsing a website
5. Since then the phone screen shows the static and if I press the power button once, the screen switches off and press again the screen comes on with the display showing properly. I can now only perform one touch which is registered and the screen freezes. If I switch off and on again the next screen / action is shown which is the action I did in the previous touch. Every time it registers one touch and I have to switch off and on again to see the next screen. Sometimes the phone just shows static and I have to wait a few seconds (30 sec) before using it again.
6. If I make a call to my phone, I hear one ring and then it is busy tone like I've cancelled the call. However the phone does not show the incoming call.
My phone has been intact and is well protected with screen guards and case. There is no physical misuse / abuse of the phone. I managed to shut down the phone and enter recovery. Here as well it only registered one touch, though the phone was processing and moving the next step. I somehow managed to initiate a factory reset through the settings, but no use.
Now in about 2-3 hrs the phone has become completely useless. I'm uncertain what the problem is, all my touch inputs are registered and processed. The screen just doesn't refresh to the next and requires a power off/on. I picked up this phone in the US and now in India. So I can't RMA the phone and I don't have warranty for this in India.
Any suggestion will be greatly appreciated.
Click to expand...
Click to collapse
I'm getting the same issue. Tried soft and hard reset. Opened her up and seated all cables. The issue is still persisting. Is replacing the USB flex the way to go?
Hey I have a nexus 5 32GB and the screen started to do weird things and now it isn't working at all. Its the same in recovery mode also do I think that it's not a software problem.
I think there is an issue with the motherboard. Please help me out.
Thanks in advance.
nexus565 said:
Hey I have a nexus 5 32GB and the screen started to do weird things and now it isn't working at all. Its the same in recovery mode also do I think that it's not a software problem.
I think there is an issue with the motherboard. Please help me out.
Thanks in advance.
Click to expand...
Click to collapse
Most likely the flex cable
ふかつどう
Anyone seen this colored screen?. I have been getting this past 2 weeks when phone is charging and screen is about to turn off. I am on stock not rooted.
bullorbear said:
Anyone seen this colored screen?. I have been getting this past 2 weeks when phone is charging and screen is about to turn off. I am on stock not rooted.
Click to expand...
Click to collapse
Looks like the daydream function. You can turn it off in Settings>Display>Daydream
Sent from my Nexus 5 Unchained using XDA Free mobile app
Same thing, Screen now black. Won't turn on...
Hey everyone, I know that this is kind of late to the thread, but I have what I believe is the same problem as everybody else here. I had my Nexus 5 in my pocket for maybe five minutes, and in between the times that I put it in my pocket and took it out again to reply to a text, the screen went all colorful and static on me (Red tint, almost as if I had twilight on, but I didn't). I tapped the back, and the colors went back to normal, but the digitizer wasn't responding to touch. Then, It went black. No color, the speakers weren't working, neither was the backlight on the display. I took it apart, and figured its either the USB flex cable (which looked frayed), or the mainboard. If its the USB flex cable, then I know I can repair it. If it's the mainboard... well, as a sixteen year-old who has no current source of income, I'm out of a $400 phone.
Pictures attatched. Thanks!
rikudo said:
I'm getting the same issue. Tried soft and hard reset. Opened her up and seated all cables. The issue is still persisting. Is replacing the USB flex the way to go?
Click to expand...
Click to collapse
I took the phone the LG service center and the technician seemed to know this issue and immediately said that the USB flex cable needs to be changed. The entire fix took about 5 mins and the phone is working fine since then.
Sorry for the delayed response.
I hate to necro up this thread but I'm having similar problems to the op with my nexus 5. About two weeks ago I saw my screen get grainy just like the op and many others mentioned and then the screen went completely black. The screen still "turns on" but it's just black with the backlight on. I can hear notifications and other things and I'm hoping that all I need to replace is just the flex cable. If it's a problem with the logic board then I'm screwed basically.
Anyway that's my story. Bought the flex cable and it'll be here by tuesday so I'll find out then if I'm lucky or not. Fingers crossed.
pezkiln said:
I hate to necro up this thread but I'm having similar problems to the op with my nexus 5. About two weeks ago I saw my screen get grainy just like the op and many others mentioned and then the screen went completely black. The screen still "turns on" but it's just black with the backlight on. I can hear notifications and other things and I'm hoping that all I need to replace is just the flex cable. If it's a problem with the logic board then I'm screwed basically.
Anyway that's my story. Bought the flex cable and it'll be here by tuesday so I'll find out then if I'm lucky or not. Fingers crossed.
Click to expand...
Click to collapse
Hey man, did you ever try this out and get it to work? I have the same problem and was thinking of trying this out but wanted confirmation first.
Thanks!
Just wanted to post here to say that this thread just saved me a lot of money!
Had the same issue (static showing on the screen). Local phone repair shop told me it needed a new screen, without even looking at it(!), and it would be £120 + labour. Told them I would think about it, and came home and did some more research, found this thread. Ordered a replacement USB flex cable from eBay, and fit it by following a YouTube tutorial, and now the phone is back working fine. brilliant!
Thanks xda!
I had a problem where my screen looked like an old CRT TV with particles flashing all over on anything with a static dark background. Any ideas