Related
Hi everyone, this is my first post here. Thanks in advance for any help that you folks can provide.
I've had the TF101 for about six months now, and it's been fine. I was using it yesterday on the train and all was good, but when I got home and took it out of my bag it didn't seem to start up. I thought it might have been a battery issue, so I let it charge overnight. Tried starting it up this morning and I got the same results. So I started looking in to other issues.
The tablet is definitely starting, adb will recognize it in its list of devices, and if I plug it in to my tv or desktop monitor w/ HDMI, I can see and interact w/ the Transformer UI (of course this is kind of painful since I have to do some guessing about where to put my fingers).
I had rooted it using rebound821's scripts and directions here, so tried an unroot to see if that was the problem. I ended up with the same results.
Does anyone here have any insights as to what the problem may be? I'm hoping to avoid sending it back to ASUS, so I'm fine w/ opening it up to look for loose cables.
So I thought that brightness might be the problem. Maybe it was set to 0 and I just wasn't seeing anything on my screen. Sadly, that doesn't seem to be the case.
I tried setting brightness at the path below to to 0, 50, 100.
/sys/devices/platform/pwm-backlight/backlight/pwm-backlight/brightness
Still no luck.
Has anyone encountered anything remotely similar to this (even if similar is just a dead screen)?
There have been others with dead screens reporting what you are, at least I have read a few reports, I think they just had to get them RMA'd, I don't recall anyone 'fixing' a dead screen, especially if you still have adb and touch working then the screen itself and backlight seem to have broken completely- some have reported the backlight dying and thinking the screen was broken, but it was just the backlight (I guess in bright light they could see pixels working, but couldn't make out what was on the screen without the backlight). I still think they had to get it repaired either by Asus or by someone who was capable of doing internal repairs with replacement parts..sorry for your luck
Looks like I'll have to send it back. I took it into the brightest light I could find and couldn't see anything at all. Guess it's the screen and maybe the backlight too. I'm pretty disappointed this happened, the only thing I can think of is that the bag I had it in was hanging from the chair in front of me on the train and it was swaying a little, and that shouldn't be enough to dislodge a connection. Either that or just some freak hardware failure. Still, I guess it's not that common of an occurrence. Thanks for the reply, I'll slink off and try to get in touch w/ Asus now.
I have experience same
My TF101 broke in the same way, screen blank. Conected to tv I`ve got image digital touch work. I shut down my TF101 normaly and screen never go back to live again. Tablet was in a protective bag (when I trave by car), just no reason for not working ( no problem at screen, previously, screen perfect - no dead pixels)
Did you guys get this resolved? I had the EXACT same thing happen yesterday. Was working just fine. Put it in its sleeve, into a protective case, into a briefcase, got home and dead.
HDMI works. I tried to call Asus but they say i'm out of warranty.
Thanks in advance.
Must be something wrong with the connections that it decays over time. I've had mine since October last year and its been fine except for today when I brought it home it wouldn't work.
I was able to fix it though. I held it vertically with the bottom edge down and tapped it firmly on my desk a couple of times. The screen came back on. There is a strong possibility that this will happen again and my tap fix won't work, but it's working at the moment
Asus Transformer screen
elementalfire23 said:
Must be something wrong with the connections that it decays over time. I've had mine since October last year and its been fine except for today when I brought it home it wouldn't work.
I was able to fix it though. I held it vertically with the bottom edge down and tapped it firmly on my desk a couple of times. The screen came back on. There is a strong possibility that this will happen again and my tap fix won't work, but it's working at the moment
Click to expand...
Click to collapse
I had exactly the same problem discussed in this thread. I was also able to bring the screen of my TF101G to life by tapping it firmly on my desk with the bottom edge. It works for now. But it is certainly disconcerting to know that some connection in this rather expensive gadget are loose and all this can happen again. I guess I will not carry my transformer around any more - just leave it at home...
spokey said:
My TF101 broke in the same way, screen blank. Conected to tv I`ve got image digital touch work. I shut down my TF101 normaly and screen never go back to live again. Tablet was in a protective bag (when I trave by car), just no reason for not working ( no problem at screen, previously, screen perfect - no dead pixels)
Click to expand...
Click to collapse
Same problem here had my unlocked bootloader tf101 for awhile now, one of the first ones out... had a great life gave it to my girl when i got the transformer prime and the screen just went out yesterday, still goes in apx mode and still recognized by computer, screen just straight up died, think it's too late for a manufacture warranty, maybe ill look but think it's gonna be no dice... sucks obviously something in the design to make this happen to so many of them...
My TF101 appears to have a dead screen. I am rooted and running Revolver Custom Rom. When connected to my pc, I am able to recognize my device. My screen will not turn on so I cannot use recovery to go back to stock. I am set up to use ADB, however, I am not very knowledgable with ADB. I am convinced I have a bad screen and I am still under warranty. Is there a way to return the TF101 back to stock using ADB? If anyone can point me in the right direction, I can probably figure it out. Otherwise, I may just try and replace my screen and see how that works out. Thanks for the help.
My backlight died on Tuesday. Similar situation of working in the morning, headed into work with it in my bag, no brutal knocks or anything but one jolt just must of finished it off after a year and 2 weeks abuse (yes 2 weeks out of warrenty).
Going to attempt to take it apart this afternoon and play with the ribbon cable as reseating it has solved quite a few peoples problems.
Woo! It worked! Very happy chappy.
Sent from my SK17i using Tapatalk 2
Same thing happened too me, first time i sent it to service, but last time i opened it myself and pushed the connector for the screen thightly in place.. worked nicely
Sent from my Transformer TF101 using xda app-developers app
Screen goes derp
I don't know if I have the same problem or not.
Backstory: I own a Transformer TF101 that I got for my birthday from my girlfriend. It was meant for travel and bs'ing around at home. Took it into work and quickly realized that I could use this for work. That went over so well that the rest of the office became intrigued. Once these came on sale on groupon, the office manager went all in on 10. These are all refurbished transformers with docks.
They have all been handed out and I now have a transformer for home and work. Kind of nice...but I do a lot of site observation so using my personal transformer was a risk that I had to take all on my own (survived a 5' fall off of a parapet wall already).
The problem: From the first 5 minutes that I had the thing, the transformer screen went blank. I opened up google play to download a few apps that I could use for work. Scrolling down I saw some choppyness which I considered the processor/memory having issues loading everything on the screen. Before I knew it - boom blank screen. Rebooted and the loading screen stays on for 2 seconds before the screen goes blank. I can tell it's working because it plays a sound at start up. I can also tell the screen is lit up (it's like it's showing a grey screen because it can't show true black colors). If I hit the power button again it goes completely black. I hit the power button again and the screen flashes to the lock screen and immediately goes blank again. I could do this over and over and over again.
Anybody having the same problem? It's refurbished....I'm guessing apparently I got the dud.
I ran into pretty much the same problem. One morning, the tablet screen would just not turn on. Sometimes, it came on and immediately shutdown, but it is still on the "On" mode. Hit the power button again will bring it to the off mode. Toggle it one more time, sometimes, will turn on the screen a off again. I was able to get it back to work with a factory restore. However, it has the following problems.
1) As soon as I adjust the brightness, the screen will go off again. And there is nothing I can do to bring it back except another factory restore.
2) The screen will flicker (and sometimes produces some clicking sound) when charging with the screen on.
Looks like my TF101 is having same issue, screen gone off suddenly (hdmi shows up in TV fine)...I am going give a try on reseating the cable hoping it resolves the issue.
leonpr, is there some tips/things I have to make sure before attempting this. I found a guide here and another youtube video on this issue as a reference...
Thanks..
Screen won't turn on unless factory reset "fix"
My girlfriend has an ASUS TF101. If the brightness goes up to 60%, the screen is blanked (no backlight either) and the only way to get it to turn back on again is to hard reset. This coincidentally happened at the same time as an update from ASUS. After lots of Googling it does not appear to be related. I was hoping it was and installed several custom ROMS which all experienced the same issue.
As a temporary work around, until I get the guts & the money to be able to replace her tablet if I break it, I found and installed AutomateIt. I set a trigger so that when the screen is turned off, the brightness is set to 50%.
Why trigger when the screen is off instead of when the screen hits above 59%? If you have this same problem, hold the brightness and go all the way until the screen blanks and then still holding your finger on the screen, move it all the way to the left and you will notice that the screen did not come back on. Press the power button once to turn it off and then again to turn it on and you will see the screen at the lowest brightness setting.
So, with the trigger in place, if you accidentally (or one of your rotten kids intentionally:angel raises the brightness above the threshold, simply press the power once to turn off the screen and then press it again to turn the screen on.
Just a note, I ended up installing AutomateIt Pro, Available for $1.60 from the Play Market. The free version works fine, but my girlfriend has been struggling with this issue for a couple of months and after so many hard resets, the little app is more than worth the money.
Have you tried Power + Volume Down for 15 seconds, and then leaving it alone for one minute? It will cold boot. Try that and it may work. Just saying; Hope it will help
Sorry for the necro-bump but here's the actual solution.
Problem: The video cable inside the Transformer comes loose and just needs to be pushed back in.
I can't post a link since I don't have 10 posts yet so just search youtube for the following key words:
blank or no display issue on the asus transformer - fix
The user who posted the video is DoCWaSaBe
Tokyudo said:
Sorry for the necro-bump but here's the actual solution.
Problem: The video cable inside the Transformer comes loose and just needs to be pushed back in.
I can't post a link since I don't have 10 posts yet so just search youtube for the following key words:
blank or no display issue on the asus transformer - fix
The user who posted the video is DoCWaSaBe
Click to expand...
Click to collapse
Just fixed my blank display problem on a TF101 which is well out of warranty. Here is the link. I found the connector loose after dropping my TF101.
Thanks!
Fix lasted for a few days, now backlight dead, tried all cables again. No joy . I hate intermittent faults so ordered a Samsung Galaxy TabPRO 10.1.
Hello all,
I have been using my TF700 for like 3 weeks now. Yesterday suddenly it started to flicker. First I tried cold boot and it turned normal but today it got even worse. It stops randomly and then starts again.
so should i return that or is it just software issue? (dammit i cant out the youtube link)
EDIT: It fades away after like 10-12 seconds, do you think it is software related? Using latest firmware btw.
archonur said:
Hello all,
I have been using my TF700 for like 3 weeks now. Yesterday suddenly it started to flicker. First I tried cold boot and it turned normal but today it got even worse. It stops randomly and then starts again.
so should i return that or is it just software issue? (dammit i cant out the youtube link)
EDIT: It fades away after like 10-12 seconds, do you think it is software related? Using latest firmware btw.
Click to expand...
Click to collapse
"5. Disable "smart dimmer", which is the reason you can see some screen flickering when changing between light and dark backgrounds that many find annoying (described by some as "dynamic contrast", which it resembles):
To disable:
echo 0 > /sys/devices/tegradc.0/smartdimmer/enable
To re-enable echo 1 to the this file or simply reboot.
Be sure to include this in a script so that rebooting won't change it (just make an .sh script with the above line in it, you can use either SManager or system .sh scripts (you can use my simple solution posted here if you don't like editing files yourself). See also jtrosky's hints on changing the brightness settings.
Please note that it may negatively affect your battery life, although with brightness set low it shouldn't be much worse.
All credit goes to those who have found out about it - see this post for details."
http://forum.xda-developers.com/showthread.php?t=1758160
thank you for your reply. it just occured that for example when there's a flicker on the screen, if i turn on auto brightness, it goes away.
the thing is actually i do not know if it is software related or just bad hardware. returning it to amazon would push me in a lot of trouble (like shipping it back, waiting for repair or sth) and the biggest problem that i don't have that much time.
archonur said:
thank you for your reply. it just occured that for example when there's a flicker on the screen, if i turn on auto brightness, it goes away.
the thing is actually i do not know if it is software related or just bad hardware. returning it to amazon would push me in a lot of trouble (like shipping it back, waiting for repair or sth) and the biggest problem that i don't have that much time.
Click to expand...
Click to collapse
I'm under the impression that the autobrightness and the smart dimmer are two different things. The smartdimmer cannot be turned off without doing the edit i pasted above. Try it out and see if it works for you
omg this is totally not normal right? it got even worse(see attached pics)
archonur said:
omg this is totally not normal right? it got even worse(see attached pics)
Click to expand...
Click to collapse
Um yea, I'd get that replaced ASAP
Yep - that's the same kind of graphical glitches that I had before I rebooted and my TF700 was dead (although my glitches weren't quite as bad). After rebooting, my device would just lock up at random places during the startup - sometimes at the first screen (where it says your device is unocked), sometimes at the Asus screen with the circles and sometimes I could even get to the Android lock screen (or even further), but in the end the device just keeps locking up hard. Tried all of the normal "reset" stuff including going back to complete stock, unrooted, etc...
In my case it's definitely a hardware problem, but since I was unlocked, I can't even get warranty service.
Just curious as to your locked state, rooted state or if you were running a custom ROM...
Thanks.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
jtrosky said:
Yep - that's the same kind of graphical glitches that I had before I rebooted and my TF700 was dead (although my glitches weren't quite as bad). After rebooting, my device would just lock up at random places during the startup - sometimes at the first screen (where it says your device is unocked), sometimes at the Asus screen with the circles and sometimes I could even get to the Android lock screen (or even further), but in the end the device just keeps locking up hard. Tried all of the normal "reset" stuff including going back to complete stock, unrooted, etc...
In my case it's definitely a hardware problem, but since I was unlocked, I can't even get warranty service.
Just curious as to your locked state, rooted state or if you were running a custom ROM...
Thanks.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
Click to expand...
Click to collapse
luckily i haven't unlocked it yet and i am sending it back to amazon for replacement. hope i will get one without problems, but i have some doubts about it after reading hundreds of complainings in forums.
My screen sometimes flickers when playing a game. The game also crashes at this point. I wonder what this issue could be. After a cold boot it usually works fine for a couple of days.
I've only had this tablet for 2 weeks now, but some issues like poor io performance, screen flickering, and the screen flex on certain points on the screen are really annoying me. Maybe I should go to the retailer and ask for a replacement.
Has anyone encountered the following issues with their SHIELD?
Mine was working just fine after updating to 4.3 and rooting with CWM. I performed multiple reboots in this configuration, played games, etc. - everything was fine.
I had a pretty busy weekend so didn't touch the SHIELD at all for a few days. When I got back:
When I opened it up, I saw the screen backlight turn on but nothing displayed on the screen. The SHIELD button was glowing green.
I long-pressed the SHIELD button to turn off the device. When I turn it back on, I get a white screen that is dark around the edges (mostly vignetting around the corners). The brightness of the screen here and degree of vignetting seem to change every time I try and turn on the device.
If I enter fastboot mode via the key combo, the same thing happens - white vignetted screen. The device DOES appear to enumerate as a fastboot device on my PC in this configuration.
At one point I figured it might be due to a low battery, so plugged it into the charger. 30 minutes later, when I opened the lid, I actually came up to a launcher screen with 65% battery.
However, after closing the lid and reopening it again - black screen again, with the "white vignette of death" coming back if I reboot.
Has anyone else seen similar behavior? Searching results in no one complaining about a white screen like this, at least not on this device.
Screen of Death
This just happened to me today. Did you find a fix for this problem?
Entropy512 said:
Has anyone encountered the following issues with their SHIELD?
Mine was working just fine after updating to 4.3 and rooting with CWM. I performed multiple reboots in this configuration, played games, etc. - everything was fine.
I had a pretty busy weekend so didn't touch the SHIELD at all for a few days. When I got back:
When I opened it up, I saw the screen backlight turn on but nothing displayed on the screen. The SHIELD button was glowing green.
I long-pressed the SHIELD button to turn off the device. When I turn it back on, I get a white screen that is dark around the edges (mostly vignetting around the corners). The brightness of the screen here and degree of vignetting seem to change every time I try and turn on the device.
If I enter fastboot mode via the key combo, the same thing happens - white vignetted screen. The device DOES appear to enumerate as a fastboot device on my PC in this configuration.
At one point I figured it might be due to a low battery, so plugged it into the charger. 30 minutes later, when I opened the lid, I actually came up to a launcher screen with 65% battery.
However, after closing the lid and reopening it again - black screen again, with the "white vignette of death" coming back if I reboot.
Has anyone else seen similar behavior? Searching results in no one complaining about a white screen like this, at least not on this device.
Click to expand...
Click to collapse
Might be just bad luck for me.....
nmerc001 said:
This just happened to me today. Did you find a fix for this problem?
Click to expand...
Click to collapse
So ive already gotten two shields and they both got the same effect. my guess is the ribbon cable when you open and close the screen, is wearing off? because when i open my shield in a certain way, it works... when i open it at around 100 degrees or open correctly then tilt it forward, the screen tears and slowly shows the white screen. I do admit that i open and close the screen more than i should, but i do it carefully. Ill look over at the ifixit site to see how the cable is connected to the board.
This is what has me worried about buying a shield, the ribbon cable, did you confirmed this was the problem?
DJNinja1625 said:
So ive already gotten two shields and they both got the same effect. my guess is the ribbon cable when you open and close the screen, is wearing off? because when i open my shield in a certain way, it works... when i open it at around 100 degrees or open correctly then tilt it forward, the screen tears and slowly shows the white screen. I do admit that i open and close the screen more than i should, but i do it carefully. Ill look over at the ifixit site to see how the cable is connected to the board.
Click to expand...
Click to collapse
I am a tech by trade and bought one of ebay for 40 bucks cuz it would not power up so the guy claimed. After getting it I found the issue was actually the display was not coming on and once it did. Then went out in a few moments. Connect it to HDMI and the unit runs all day of you want to be cabled. ]
So I tore it down and found that the issue is the flex cable. The problem is that the flex cable is part of the LCD and you cannot just replace the cable. Also since the unit is so new there are no sources as of yet to by the LCD from.
So if you have this issue I suggest just holding out till a source of LCD's at hopefully a reasonable price become available.
So it's soldered to the screen and not replacable right?
nex86 said:
So it's soldered to the screen and not replacable right?
Click to expand...
Click to collapse
That is correct.. The flex cable is actually an integral part of the display and even has much of the driver circuitry placed right on it at the LCD. In the business we call it a flex circuit since it is a flexible circuit board and not just a cable.
I pretty much know what you mean.
On my old Archos Gamepad I ripped the flex that connected the left side of the controler to the logic board by accident.
It was a pain in the ass to fix it by soldering seperate wires, I guess it's impossible to do this with the display connection in the Shield.
nex86 said:
I pretty much know what you mean.
On my old Archos Gamepad I ripped the flex that connected the left side of the controler to the logic board by accident.
It was a pain in the ass to fix it by soldering seperate wires, I guess it's impossible to do this with the display connection in the Shield.
Click to expand...
Click to collapse
Might be possible if you used 32 gauge magnet wire. It is enamel coated so it won't short, but it to will break over time.
hi, flash factory image
Sent from my LT25i using XDA Free mobile app
dragxdk said:
hi, flash factory image
Sent from my LT25i using XDA Free mobile app
Click to expand...
Click to collapse
How are you supposed to flash a factory image when the screen won't let you see what you are doing? When you are in the bootloader screen the HDMI drivers are not loaded yet so not even hooking it to an external monitor will work. You might want to fully read and understand the problem next time before offering advice.:good:
fastboot tells you if you were sucessful or not.
just for relocking the bootloader you have to do some button combinations, you can look up some tutorial videos to see what you have to press.
nex86 said:
fastboot tells you if you were sucessful or not.
just for relocking the bootloader you have to do some button combinations, you can look up some tutorial videos to see what you have to press.
Click to expand...
Click to collapse
Even still, it is not a software problem that causes this. I know because if I move my display to a certain angle it will start to work sometimes. A software issue would not cause this. I also have taken my apart since I am a tech and can actually see the traces in the flex cable that have broken..
Any device with a folding display is a bad idea and a failure waiting to happen. Flex cables have a limited number of flex cycles that is even usually published. So the idea of using them in a device that may get heavy use is just dumb.
Solarenemy68 said:
Any device with a folding display is a bad idea and a failure waiting to happen. Flex cables have a limited number of flex cycles that is even usually published. So the idea of using them in a device that may get heavy use is just dumb.
Click to expand...
Click to collapse
I agree, they used flex in the Nintendo DS and 3Ds as well, but they don't break that fast.
I find it still better if they have used recular cables like what they use for Laptops.
Solarenemy68 said:
Even still, it is not a software problem that causes this. I know because if I move my display to a certain angle it will start to work sometimes. A software issue would not cause this. I also have taken my apart since I am a tech and can actually see the traces in the flex cable that have broken..
Any device with a folding display is a bad idea and a failure waiting to happen. Flex cables have a limited number of flex cycles that is even usually published. So the idea of using them in a device that may get heavy use is just dumb.
Click to expand...
Click to collapse
What you are saying is the EXACT same thing that happened to my SHIELD. I can tell its a hardware problem because when I tilted my screen it would work, and sometimes it wouldn't. Now my SHIELD's display does not even show any signs of picture. HDMI still works, however. Like one of the previous posts said, there is not a screen available for purchase, so my next step is NVIDIA customer support. Maybe if they would sell these screens, I wouldn't even have to have a warranty claim. sigh.
White screen of death?
yes mine too same as
i tried connecting my via HDMI from power cable to large HDMI to plug it works fine on my galaxy tab
thought id be clever try it on nvidia shield never worked sould of bought mini HDMI so now White screen of death
i cant get into recovery or anything i had this on charge for 12 hrs yesterday still no green button on charge only orange .. i too cant find anything on internet to help with this White screen of death situation
Solarenemy68 said:
How are you supposed to flash a factory image when the screen won't let you see what you are doing? When you are in the bootloader screen the HDMI drivers are not loaded yet so not even hooking it to an external monitor will work. You might want to fully read and understand the problem next time before offering advice.:good:
Click to expand...
Click to collapse
This. I'm having a similar issue. My wife's SHIELD has an unresponsive touch screen. So I tried to flash the factory image (It was never rooted to begin with) and I got the white screen issue when in the bootloader screen. I have to keep restarting it to get the screen to show up as normal when the device boots to the home screen. But the bootloader screen is still blank and white. I was able to watch a video and mimick the steps to flash the factory image but that did not fix the issue. It's definitely a hardware issue. I live in Cincinnati OH, anywhere I can go to have this fixed? I have a portable myself and i know this is going to happen to mine soon.
Went to unlock my phone this morning off the charger and the screen is totally dead. Couldn't unlock or do anything to it or even see what was going on, called Google and ordered a replacement ASAP.
Went through the not fun task of doing a nandroid backup without seeing what was on the screen and doing some trickery with screenshots then backing up my entire SD card.
However, here's the strange and potentially dangerous thing that I noticed later when I got home this evening. I went to look at the phone and go to a fastboot flash with the factory images and went to touch the bottom of the screen. When I went to do so, to the little bit of the left of the LED light was a SUPER hot portion of the phone. I almost burnt my finger it was so hot.
Not sure what to do about the issue, I feel like if I just call the support line they won't actually take in my concern legitimately. Any suggestions?
thats something quite strange
let us know what google says about RMA and this issue
Agree, maybe it's just your phone, maybe it's all the batch. Which batch/model do you have?
Sent from my Nexus 5 using Tapatalk
kentoe said:
Went to unlock my phone this morning off the charger and the screen is totally dead. Couldn't unlock or do anything to it or even see what was going on, called Google and ordered a replacement ASAP.
Went through the not fun task of doing a nandroid backup without seeing what was on the screen and doing some trickery with screenshots then backing up my entire SD card.
However, here's the strange and potentially dangerous thing that I noticed later when I got home this evening. I went to look at the phone and go to a fastboot flash with the factory images and went to touch the bottom of the screen. When I went to do so, to the little bit of the left of the LED light was a SUPER hot portion of the phone. I almost burnt my finger it was so hot.
Not sure what to do about the issue, I feel like if I just call the support line they won't actually take in my concern legitimately. Any suggestions?
Click to expand...
Click to collapse
On my Transformer Infinity, sometimes the screen won't turn on at all. On a few occasions, if I press Power enough times, I get a glimpse of a message saying the Launcher process has stopped, but then my touchscreen doesn't register any input. The tablet is also sometimes running quite hot at those times. The only way I know to recover from this is press the Power button long enough to force a reboot, then everything is normal. Could this be what's happening? Do you know if the phone is still running under the black screen? Have you tried forcing a reboot, and did it work?
As for the hot phone, I've noticed my N5 does get a bit warm when I'm using it intensively (4G, WiFi, Bluetooth, GPS and screen on all at the same time and in use) but not enough to burn me. Could be hard to tell which component is heating up like that since I think it could be the screen backlight, SoC or battery... Do let us know if you find out more.
meethere said:
thats something quite strange
let us know what google says about RMA and this issue
Click to expand...
Click to collapse
I had called them and reported the screen totally dead with lines streaking vertically and got a new replacement ordered. It wasn't until late last night when I got back and had the screen on in this dead mode that the bottom was extremely hot. I'll have to call them back and let them know
dark_ente said:
Agree, maybe it's just your phone, maybe it's all the batch. Which batch/model do you have?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Yeah hopefully, it definitely seems like it could be one of those things that could potentially start fire.The one I have is the LG-D820. Any more info I can provide?
daemonios said:
On my Transformer Infinity, sometimes the screen won't turn on at all. On a few occasions, if I press Power enough times, I get a glimpse of a message saying the Launcher process has stopped, but then my touchscreen doesn't register any input. The tablet is also sometimes running quite hot at those times. The only way I know to recover from this is press the Power button long enough to force a reboot, then everything is normal. Could this be what's happening? Do you know if the phone is still running under the black screen? Have you tried forcing a reboot, and did it work?
As for the hot phone, I've noticed my N5 does get a bit warm when I'm using it intensively (4G, WiFi, Bluetooth, GPS and screen on all at the same time and in use) but not enough to burn me. Could be hard to tell which component is heating up like that since I think it could be the screen backlight, SoC or battery... Do let us know if you find out more.
Click to expand...
Click to collapse
Yeah, no its definitely dead. There were streaked lines across it, rebooted it multiple times. I ended up going into the bootloader and recovery via adb/fastboot and all that jazz. It eventually just would not work now.
In regards to the hot part I definitely think it was the lower part of the screen. It was quite literally half an inch away from the LED to the left. Was super super hot then once I shut the defective screen off (I could tell by the backlit light or whatever) it wasn't hot anymore after a minute or so.
Is it black/white? 16 or 32? When did you get it?
Sent from my Nexus 5 using Tapatalk
dark_ente said:
Is it black/white? 16 or 32? When did you get it?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
32gb black version. I ordered it immediately when they announced it that day.
mine gets really warm when i'm doing a TWRP backup then it goes into bootloop after and wont cool down. i have to force it to power off from recovery and let it cool, but i've always seen it happen. i wonder if yours was attempting to boot over and over for hours and cooked itself.....? i have a launch day black 32gb too, running Cataclysm with Franco at the moment but it was doing it on rooted stock with stock kernel
I had to send my 19 day old 32Gb Red Nexus 5 in to LG for the same reason. I was using the phone and all of the sudden had vertical lines and the bottom of the screen got burn your fingers hot. Waiting to see what LG does with my phone. The only thin I can figure is the synaptics chip which controls the screen is bad. Its the only thing in that area that could get that hot. I also noticed when I first got my phone the glass in the same area looked like it had a slight wave in it. Didn't think anything of it at the time. I'll let you know how it goes.
Is RMA/replacement applicable for Rooted and unlocked devices?
I don't believe its an issue with developer phones as long as the issue wasn't caused by something you did like brick it by flashing a wrong radio or something like that. It has to be a manufacture defect to get it fixed for free.
Sent from my ME173X using XDA Free mobile app
Bear3825 said:
I don't believe its an issue with developer phones as long as the issue wasn't caused by something you did like brick it by flashing a wrong radio or something like that. It has to be a manufacture defect to get it fixed for free.
Sent from my ME173X using XDA Free mobile app
Click to expand...
Click to collapse
My device issue is related to power button. there is no software issue.
The power button is rattling since from the purchase of the device.
Hope my device gets repaired.
Like I said. Hardware issues that are production faults should be covered.
Sent from my ME173X using XDA Free mobile app
Has anyone come across this before? I was watching a video on MX Player not too long ago, and it seems to have resulted in a permanent colourful static for the phone.
I can't really tell if it's doing anything, but when I go through the motions of resetting it or booting into bootloader, the screen does not change at all.
Interestingly the volume buttons are still working, and if I press the area of the screen where I think the buttons are (e.g., the back/home/programs buttons) I get the right vibrations. Which leads me to believe my screen is broken, and that it's a hardware fault. I'm hoping pretty hard this isn't the case, as my phone is only two months old and it was a replacement for a 6 month old Nexus 4 which had stopped charging.
Anyone come across this before? I'm hoping there's a kind of solution somewhere out there... To make matters worse I bought this phone via a parallel importer AND I'm currently overseas and won't be back till the end of January.
Sigh. Photo of screen is as attached - please forgive the terrible quality as I had to use my laptop webcam.
Thanks in advance, everyone!
jono_nz said:
Has anyone come across this before? I was watching a video on MX Player not too long ago, and it seems to have resulted in a permanent colourful static for the phone.
I can't really tell if it's doing anything, but when I go through the motions of resetting it or booting into bootloader, the screen does not change at all.
Interestingly the volume buttons are still working, and if I press the area of the screen where I think the buttons are (e.g., the back/home/programs buttons) I get the right vibrations. Which leads me to believe my screen is broken, and that it's a hardware fault. I'm hoping pretty hard this isn't the case, as my phone is only two months old and it was a replacement for a 6 month old Nexus 4 which had stopped charging.
Anyone come across this before? I'm hoping there's a kind of solution somewhere out there... To make matters worse I bought this phone via a parallel importer AND I'm currently overseas and won't be back till the end of January.
Sigh. Photo of screen is as attached - please forgive the terrible quality as I had to use my laptop webcam.
Thanks in advance, everyone!
Click to expand...
Click to collapse
Only time I've seen something like this was when my integrated graphics card on my desktop overheated, everything still worked, but colorful static everywhere. I'd let it cool down for a while, chances are it was pretty hot when it did that, and see if high temps might make it happen again.
I just had the same thing happen. Phone had been in my pocket and I had just taken it out to check the time maybe 10 minutes before it happened. The only difference with mine was I bumped into a table and hit the phone in my pocket. It does have a case on it and there is no sign of damage at all such as a cracked screen or anything. The static only lasts for a few seconds and thats right after I force it to reboot. After that it just goes to an all black screen. My LED indicator light is still flashing at me telling me I have an email though so I'm not sure what the deal is.
Were you able to resolve this issue? I too just experienced this issue as well and my phone is currently unusable. Thanks!
Do a full wipe as in wiping the entire phone and making it as if you just got it out of the box. if it persist RMA
Sent from my Nexus 5
Hi, I broke my screen (really bad smash) and had have this static on my new screen. The new screen was apparently fully tested. When using the slim port i can display on my TV and the digitizer works fine, its just this same colour static on the handset. I am now waiting for a replacement USB flex (it was a bit bent in the break) and i expect the new USB flex will fix it. If not then its a bad screen.
Will post the results when i get the parts
Fixed!
Hi,
My new USB flex arrived today. I installed it and found my screen is working perfectly.
The first pic is the same colour static that the op had.. Second one is the USB flex board / ribbon. Ebay for 20 Euro. Please remember that USA users are LG D820 and Europe/rest of works LG D821. I think its important for this part as the aerials connect here ans they are different in USA.
Good luck everyone
zeebo1111 said:
Hi,
My new USB flex arrived today. I installed it and found my screen is working perfectly.
The first pic is the same colour static that the op had.. Second one is the USB flex board / ribbon. Ebay for 20 Euro. Please remember that USA users are LG D820 and Europe/rest of works LG D821. I think its important for this part as the aerials connect here ans they are different in USA.
Good luck everyone
Click to expand...
Click to collapse
Hi,
sorry for reopen the topic but I really need to know if change de USB flex solve this problem
thanks
Static screen and freezing
Hi All,
Need help here with my 6 month old Nexus 5. It has been pretty good with no issues but since last evening, it started behaving weird. The chronological events are as follows
1. While browsing on Chrome some websites were not scrolling intermittently. This was only in the browser.
2. After about 10 mins of the above behavior the entire phone froze and didn't release itself. I had to force reboot by holding the power button down for about 10 secs. When the screen came on, it was the static screen
3. I again pressed the power button a couple of times but no use. Held it again for 10 secs, then phone rebooted and everything was fine.
4. Continued to use the phone and everything was normal until this afternoon, when the phone again froze while browsing a website
5. Since then the phone screen shows the static and if I press the power button once, the screen switches off and press again the screen comes on with the display showing properly. I can now only perform one touch which is registered and the screen freezes. If I switch off and on again the next screen / action is shown which is the action I did in the previous touch. Every time it registers one touch and I have to switch off and on again to see the next screen. Sometimes the phone just shows static and I have to wait a few seconds (30 sec) before using it again.
6. If I make a call to my phone, I hear one ring and then it is busy tone like I've cancelled the call. However the phone does not show the incoming call.
My phone has been intact and is well protected with screen guards and case. There is no physical misuse / abuse of the phone. I managed to shut down the phone and enter recovery. Here as well it only registered one touch, though the phone was processing and moving the next step. I somehow managed to initiate a factory reset through the settings, but no use.
Now in about 2-3 hrs the phone has become completely useless. I'm uncertain what the problem is, all my touch inputs are registered and processed. The screen just doesn't refresh to the next and requires a power off/on. I picked up this phone in the US and now in India. So I can't RMA the phone and I don't have warranty for this in India.
Any suggestion will be greatly appreciated.
Madzy said:
Hi All,
Need help here with my 6 month old Nexus 5. It has been pretty good with no issues but since last evening, it started behaving weird. The chronological events are as follows
1. While browsing on Chrome some websites were not scrolling intermittently. This was only in the browser.
2. After about 10 mins of the above behavior the entire phone froze and didn't release itself. I had to force reboot by holding the power button down for about 10 secs. When the screen came on, it was the static screen
3. I again pressed the power button a couple of times but no use. Held it again for 10 secs, then phone rebooted and everything was fine.
4. Continued to use the phone and everything was normal until this afternoon, when the phone again froze while browsing a website
5. Since then the phone screen shows the static and if I press the power button once, the screen switches off and press again the screen comes on with the display showing properly. I can now only perform one touch which is registered and the screen freezes. If I switch off and on again the next screen / action is shown which is the action I did in the previous touch. Every time it registers one touch and I have to switch off and on again to see the next screen. Sometimes the phone just shows static and I have to wait a few seconds (30 sec) before using it again.
6. If I make a call to my phone, I hear one ring and then it is busy tone like I've cancelled the call. However the phone does not show the incoming call.
My phone has been intact and is well protected with screen guards and case. There is no physical misuse / abuse of the phone. I managed to shut down the phone and enter recovery. Here as well it only registered one touch, though the phone was processing and moving the next step. I somehow managed to initiate a factory reset through the settings, but no use.
Now in about 2-3 hrs the phone has become completely useless. I'm uncertain what the problem is, all my touch inputs are registered and processed. The screen just doesn't refresh to the next and requires a power off/on. I picked up this phone in the US and now in India. So I can't RMA the phone and I don't have warranty for this in India.
Any suggestion will be greatly appreciated.
Click to expand...
Click to collapse
I'm getting the same issue. Tried soft and hard reset. Opened her up and seated all cables. The issue is still persisting. Is replacing the USB flex the way to go?
Hey I have a nexus 5 32GB and the screen started to do weird things and now it isn't working at all. Its the same in recovery mode also do I think that it's not a software problem.
I think there is an issue with the motherboard. Please help me out.
Thanks in advance.
nexus565 said:
Hey I have a nexus 5 32GB and the screen started to do weird things and now it isn't working at all. Its the same in recovery mode also do I think that it's not a software problem.
I think there is an issue with the motherboard. Please help me out.
Thanks in advance.
Click to expand...
Click to collapse
Most likely the flex cable
ふかつどう
Anyone seen this colored screen?. I have been getting this past 2 weeks when phone is charging and screen is about to turn off. I am on stock not rooted.
bullorbear said:
Anyone seen this colored screen?. I have been getting this past 2 weeks when phone is charging and screen is about to turn off. I am on stock not rooted.
Click to expand...
Click to collapse
Looks like the daydream function. You can turn it off in Settings>Display>Daydream
Sent from my Nexus 5 Unchained using XDA Free mobile app
Same thing, Screen now black. Won't turn on...
Hey everyone, I know that this is kind of late to the thread, but I have what I believe is the same problem as everybody else here. I had my Nexus 5 in my pocket for maybe five minutes, and in between the times that I put it in my pocket and took it out again to reply to a text, the screen went all colorful and static on me (Red tint, almost as if I had twilight on, but I didn't). I tapped the back, and the colors went back to normal, but the digitizer wasn't responding to touch. Then, It went black. No color, the speakers weren't working, neither was the backlight on the display. I took it apart, and figured its either the USB flex cable (which looked frayed), or the mainboard. If its the USB flex cable, then I know I can repair it. If it's the mainboard... well, as a sixteen year-old who has no current source of income, I'm out of a $400 phone.
Pictures attatched. Thanks!
rikudo said:
I'm getting the same issue. Tried soft and hard reset. Opened her up and seated all cables. The issue is still persisting. Is replacing the USB flex the way to go?
Click to expand...
Click to collapse
I took the phone the LG service center and the technician seemed to know this issue and immediately said that the USB flex cable needs to be changed. The entire fix took about 5 mins and the phone is working fine since then.
Sorry for the delayed response.
I hate to necro up this thread but I'm having similar problems to the op with my nexus 5. About two weeks ago I saw my screen get grainy just like the op and many others mentioned and then the screen went completely black. The screen still "turns on" but it's just black with the backlight on. I can hear notifications and other things and I'm hoping that all I need to replace is just the flex cable. If it's a problem with the logic board then I'm screwed basically.
Anyway that's my story. Bought the flex cable and it'll be here by tuesday so I'll find out then if I'm lucky or not. Fingers crossed.
pezkiln said:
I hate to necro up this thread but I'm having similar problems to the op with my nexus 5. About two weeks ago I saw my screen get grainy just like the op and many others mentioned and then the screen went completely black. The screen still "turns on" but it's just black with the backlight on. I can hear notifications and other things and I'm hoping that all I need to replace is just the flex cable. If it's a problem with the logic board then I'm screwed basically.
Anyway that's my story. Bought the flex cable and it'll be here by tuesday so I'll find out then if I'm lucky or not. Fingers crossed.
Click to expand...
Click to collapse
Hey man, did you ever try this out and get it to work? I have the same problem and was thinking of trying this out but wanted confirmation first.
Thanks!
Just wanted to post here to say that this thread just saved me a lot of money!
Had the same issue (static showing on the screen). Local phone repair shop told me it needed a new screen, without even looking at it(!), and it would be £120 + labour. Told them I would think about it, and came home and did some more research, found this thread. Ordered a replacement USB flex cable from eBay, and fit it by following a YouTube tutorial, and now the phone is back working fine. brilliant!
Thanks xda!
I had a problem where my screen looked like an old CRT TV with particles flashing all over on anything with a static dark background. Any ideas