Related
Hi all,
I am at my wits end on this problem if anyone can offer any adivice it would be greatly appreciated. So let me give a recap of what has occured thus far. The water damage tag for some reason turn pink thus i am unable to get warranty exchange. I am pretty certain that the phone has never been expose to any water of anything of that sort, but i do live in houston, tx so might be humidity or what not that cause the tag to turn. Anyways.
1. This all started after i flashed RRE 5.2 RC3. Initially after a successful flash everything seem normal and fine. Then next morning i woke up to a frozen screen with many verticial lines running up and down the screen was almost unreadable. Initially i thought it was a bad flash or just random lock up. I did a hard reset and tried to enter the bootloader. Black screen, it does seem like the backlight is coming up but nothing on the screen. I can hear the phone power on and boot successfully into windows. Activesync connects i can browse the contents of the phone.
2. After flashing to stock att rom and stock htc roms same symptoms. So at this point i am thinking crap bad LCD screen. so I ordered both the digitizer and lcd screen for good measure. I replaced them hoping that a bad LCD was all. replaced both screens and i powered on the phone. same problem. black screen. The phone still powers on and boots into windows. Activesync still connects and i cna still reflash the phone.
3. I work extensively and do both desktop pc and notebook repair. I am not new to dealing with small electronic repairs. but at this juncture i am unable to identify the cause of hte malfunction. i am hoping maybe some of the gurus here might be able to shine some light on the subject.
Thanks in advance for any help.
I would have followed the same approach; your description makes it sound like it might be some kind of backlighting issue at first read. I'm inclined to think it might be a cold connection (bad connector) on the main board.
Silly question, what happens if you power up the phone with the keyboard exposed?
*EDIT* Not sure if you have been here yet: http://www.mikechannon.net/
Cheers,
i just tried to power up the phone with keyboard exposed. Powers up the same as with the keyboard hidden. Still boots up fine but black screen. I already have the service manuel dowloaded. i have checked around with several repair places both local and on the web. Seems like no one has any parts for the att fuze/touch pro gsm except for the lcd and digitizer and a speaker.
its quite possible that it is a main board but as the same time it might be something as simple as a ribbon cable. i have contacted htc about doing a possible repair and they want wayyyy too much for just a main board repair almost $400 USD.
Anyone have a bricked/ non working touch pro they would like to sell ? =P
fkoong said:
its quite possible that it is a main board but as the same time it might be something as simple as a ribbon cable.
Click to expand...
Click to collapse
Could be a bad ribbon cable ... and firmly pressing around the front/back of the unit shows no change?
pressing the phone front and back show no changes to display. in a very dark room I can see that there is light emitting from the display but its just the screen is not displaying anything visable. this occured both before and after i changed out the screens. I'll do another visual inspection of all the boards to see if there is any bad resistors burnt out circuits etc.. but i didn't notice anything mentionable during my first 2 inspections. Maybe 3rd time is the charm.
Thanks for all the feedback thus far Hilaireg it is quite appreciated. All this venting has at least made me feel 1000% better than after i replaced my lcd and still same problem at least i don't feel like a complete idiot!
Sorry I couldn't be of much help ... you've done all the steps a seasoned hardware person would do.
Do post back to let other folks know if you get it back up and running.
Cheers,
you have a pm fkoong.
I have possibly the same problem. Phone got wet, dried it out for 2 days (in a container of rice). Phone worked but had "water marks" on screen that disappeared after two days and everything was fine for about 2 weeks. Then one day (happened to be humid misting rain eve in Charleston) the screen is blank (hint of backlight only). A soft reset and it seems OK for about 1hr, then blank again. The hard resest screen displayed OK (readbale text etc), but didnt work. But as I write this, I retry to document it results correctly and the NATF ROM is reloading and the screen works! We will see how long!!
Well.. not that long, the end of the ROM load and it went blank again, seems like a video driver problem. The Press VoluP to boot does show some red artifact.
Trying hard reset again (No SIM no uSD)
The NATF v4.4 loads and gives me the Tap screen, Align Screen, stylus, loads customization, opera, tf3d, then loads a bunch of files under ...... and then the screen goes blank again, seem like what happened last time, so Ill try loading a fresh ROM copy... later
Hey guys,
I am going crazy here, searching forums did not help me at all.
The lower section of the screen keeps flicking, and not always, what do i mean by flicking, its like the screen at the lower section keeps doing like a strange low refresh rate, and has an old imprint of some old menus. Happens especially when there is the color of gray.
Made a screenshot of the phone, no problems, there, so its not a software rendering problem, might be a drivers problem though, or a defec tin the screen itself.
Frequency is high but not always, and am unable to determine when does that happen exactly. going crazy here, is this a defect? or all touch pro's have this?
Exact explanation summary:
1CM from the bottom of the LCD sometimes flickers as if that 1CM is having an extremely low refresh rate. Mostly happens when there is light gray, but not necessarily, and a soft reset for the phone does not remove it. It happens on random!
Hey,
Yeah it happens to me too! You don't need to do a soft reset, it actually fades away if you watch it closely! I don't know what it is either, and yes it is random as you have stated! I initially thought it was an application I installed as it only started happening after that, so I did a full hard reset and its still happening! Not sure what or how, but hoping next firmware version stops it!
Cheers,
mpls-te
As it happens, that's exactly why I've logged on here today! Any ideas whta the cause might be?
OK, good to see that others have this, so am not alone here, experts here, any ideas? other touch pro users, can you please leave your statements?
I hope its a driver issue.
But from what i noticed, its like, the screen is OFF, as in blank and no back light, but somehow, the application working on the screen before you turned off the device is somehow printing something on the LCD, something that we don't see, and when we actually start the phone and its back light, that OFF LINE imprint pops on screen. Something like that.
Its completely illogical, but dunno, can't find any sense here and am going crazy
Same thing happened to me and a few others as well.
See my thread here.
What rom is everyone using?
I've noticed a similar issue with mine, except rather than something software it seems like it's the backlight for the bottom 1cm of the screen flickering slightly. I don't see any weird pixels or inappropriate screen information, just a dimming/high speed flickering of the backlight in that same regionas yours. It comes and goes. Sometimes weeks without it, then maybe 3 times in a day for a minute or two at a time. Everything else works fine and whatever screen I go to displays fine.
I'm assuming it's a hardware problem with the LED(s) that light up the bottom portion of the screen, and I'm going to use it as an excuse to get a warranty replacement somewhere near the end of the warranty when the phone's getting a little old and worn.
maxh said:
I've noticed a similar issue with mine, except rather than something software it seems like it's the backlight for the bottom 1cm of the screen flickering slightly. I don't see any weird pixels or inappropriate screen information, just a dimming/high speed flickering of the backlight in that same regionas yours. It comes and goes. Sometimes weeks without it, then maybe 3 times in a day for a minute or two at a time. Everything else works fine and whatever screen I go to displays fine.
I'm assuming it's a hardware problem with the LED(s) that light up the bottom portion of the screen, and I'm going to use it as an excuse to get a warranty replacement somewhere near the end of the warranty when the phone's getting a little old and worn.
Click to expand...
Click to collapse
Lool, evil, lets just hope that this problem DOES occur when you go to their shop for your replacement
Good idea though, might do the same thing except that i have to travel abroad to where i got the phone from to actually get the warranty working. Don't forget to re-enable stock SPL and stock ROM
It happens frequently enough I'll be able to get it on video just in case they need proof, but typically they just exchange by mail.
I just posted in another thread about this issue. I have run into the same thing a few times. The bottom portion of the screen flickers, and when i do things that have a dark gray or black screen I can see a ghost image of the left and right soft keys from my TFL3D home screen. It seems to be most noticeable when the screen brightness is set to max. To get it to go away I usually do a few soft resets, and then, if needed, i will turn off the phone and take the battery out for a while. I have never tried waiting it out to see if it will just go away on its own.
proj3ktpat said:
I just posted in another thread about this issue. I have run into the same thing a few times. The bottom portion of the screen flickers, and when i do things that have a dark gray or black screen I can see a ghost image of the left and right soft keys from my TFL3D home screen. It seems to be most noticeable when the screen brightness is set to max. To get it to go away I usually do a few soft resets, and then, if needed, i will turn off the phone and take the battery out for a while. I have never tried waiting it out to see if it will just go away on its own.
Click to expand...
Click to collapse
I see that everyone posting in this thread,that has their signature filled in, is using the Energy ROM. I find that very interesting.
i am having the same problems, sometimes touchflo3d will flicker at the bottom, near the edges. I also get text that can be read through other screens. Like on pocketshield i can see the left and right softkey words still at the bottom. its so odd !
P.S im on energyrom
I'm on NATF v2.2, not an energy rom. But then again, mine looks more like a hardware issue, as I've never seen any ghost images of text or softkeys, just flickering.
can somebody post screens?
maybe the same problem here...
hardreset, other roms > problem still there:-(
Same problem here and I am using stock rom!
here are 3 screens of my xda diamond pro, using latest official o2 rom and newest romeOS eng
hope you can see this prob?! same like yours?
climber1872000 said:
I see that everyone posting in this thread,that has their signature filled in, is using the Energy ROM. I find that very interesting.
Click to expand...
Click to collapse
Well, i doubt EnergyROM has anything to do with that problem, since my Stock ROMz had same problem, never got fixed with any updates HTC used to release. MAYBE some Cooked ROMs out there have this solved, if any, please let us know And my problem is nothing close to screenshots above :S
mj084 said:
here are 3 screens of my xda diamond pro, using latest official o2 rom and newest romeOS eng
...
hope you can see this prob?! same like yours?
Click to expand...
Click to collapse
Dude, those photos are awful, after seeing them am happy with my phone flickering, its nothing close to this.
You see, in your photos, all three of em, you some kind of shadow effect, where text of a button for example has that same text beneath it 3x6mm, that is not my case at all.
My case is as follows, IF i am on the home screen for example all looks ok, except that the bottom 1CM of the screen is flickering. If i go to another window, either a total black one or any other screen, i would still see a ghost of the old home screen, for example, and only at the bottom 1CM.
Will post photos once i get my cam back. Cheers
similar issue
my issue is kinda similar, instead of getting the bottom 1cm or so discoloration or stuck pixels, I get streaks of red or blue on my screen. I have had this happen on each version of NATF I have tried, but don't remember it happening on the stock version (which I am tempted to try again to see if that's the issue).
Could this be a driver issue?
mind is even worse than all you guys, the touch screnn dose not response, and i have the energy rom on it, before it goes wrong. it just suddenly dose not response, than i send it to HTC, they ask for 425.00 for fix.... I will just send this to Asia and get some one to fix it.
But I hope before i send it out, some one can help me here.... anyway can fix it easy!!!!
Hi all, i have the same problem, here's another topic about it
http://forum.xda-developers.com/showthread.php?t=447891&page=2
Ok, so I've had my Fuze like 4 or 5 months now and have had no problems until a day or two ago. I try to do anything, my screen does not work properly. I touch somewhere and it doesn't register it 95% of the time. I looked at the screen and there seems to be a little liquid under there but I don't know how it got there, I put a screen protector on it the whole time I've had it and it just appeared out of nowhere and it's never had any kind of liquid spilt on it or anything. I try to click on the text box for SMS in touchflo 2.1 and it won't go in there and it starts moving the text messages up and down and opening task manager randomly and whenever I open the start menu it goes right into moving the items around. I have tried reflashing but have not yet tried to go back to stock. I'm going to try that and if it doesn't work I'm takin it in to AT&T to see if they can either give me a new one or fix it.
I have had the same problem with my screen on Touch Pro.
I had to get the phone repaired under warranty. I think HTC replaced the screen.
Search the forums, quite a few people have had this problem.
Has it been exposed to heat?
Seeing as your a fellow texan, have you left it in your car or under direct sunlight for a prolonged period?
I'd look up an At&t Device Support center and take it to them, they should change the device on the spot if there's no physical damage and its still under warranty.
Make sure you revert to the Stock/Shipped ROM and SPL (i wouldn't worry too much about the SPL though if you can't get it, i've turned in 2 devices with a hardSPL and nothing ever happened, but its better to be safe then sorry right?)
best of luck
Has anyone come across this before? I was watching a video on MX Player not too long ago, and it seems to have resulted in a permanent colourful static for the phone.
I can't really tell if it's doing anything, but when I go through the motions of resetting it or booting into bootloader, the screen does not change at all.
Interestingly the volume buttons are still working, and if I press the area of the screen where I think the buttons are (e.g., the back/home/programs buttons) I get the right vibrations. Which leads me to believe my screen is broken, and that it's a hardware fault. I'm hoping pretty hard this isn't the case, as my phone is only two months old and it was a replacement for a 6 month old Nexus 4 which had stopped charging.
Anyone come across this before? I'm hoping there's a kind of solution somewhere out there... To make matters worse I bought this phone via a parallel importer AND I'm currently overseas and won't be back till the end of January.
Sigh. Photo of screen is as attached - please forgive the terrible quality as I had to use my laptop webcam.
Thanks in advance, everyone!
jono_nz said:
Has anyone come across this before? I was watching a video on MX Player not too long ago, and it seems to have resulted in a permanent colourful static for the phone.
I can't really tell if it's doing anything, but when I go through the motions of resetting it or booting into bootloader, the screen does not change at all.
Interestingly the volume buttons are still working, and if I press the area of the screen where I think the buttons are (e.g., the back/home/programs buttons) I get the right vibrations. Which leads me to believe my screen is broken, and that it's a hardware fault. I'm hoping pretty hard this isn't the case, as my phone is only two months old and it was a replacement for a 6 month old Nexus 4 which had stopped charging.
Anyone come across this before? I'm hoping there's a kind of solution somewhere out there... To make matters worse I bought this phone via a parallel importer AND I'm currently overseas and won't be back till the end of January.
Sigh. Photo of screen is as attached - please forgive the terrible quality as I had to use my laptop webcam.
Thanks in advance, everyone!
Click to expand...
Click to collapse
Only time I've seen something like this was when my integrated graphics card on my desktop overheated, everything still worked, but colorful static everywhere. I'd let it cool down for a while, chances are it was pretty hot when it did that, and see if high temps might make it happen again.
I just had the same thing happen. Phone had been in my pocket and I had just taken it out to check the time maybe 10 minutes before it happened. The only difference with mine was I bumped into a table and hit the phone in my pocket. It does have a case on it and there is no sign of damage at all such as a cracked screen or anything. The static only lasts for a few seconds and thats right after I force it to reboot. After that it just goes to an all black screen. My LED indicator light is still flashing at me telling me I have an email though so I'm not sure what the deal is.
Were you able to resolve this issue? I too just experienced this issue as well and my phone is currently unusable. Thanks!
Do a full wipe as in wiping the entire phone and making it as if you just got it out of the box. if it persist RMA
Sent from my Nexus 5
Hi, I broke my screen (really bad smash) and had have this static on my new screen. The new screen was apparently fully tested. When using the slim port i can display on my TV and the digitizer works fine, its just this same colour static on the handset. I am now waiting for a replacement USB flex (it was a bit bent in the break) and i expect the new USB flex will fix it. If not then its a bad screen.
Will post the results when i get the parts
Fixed!
Hi,
My new USB flex arrived today. I installed it and found my screen is working perfectly.
The first pic is the same colour static that the op had.. Second one is the USB flex board / ribbon. Ebay for 20 Euro. Please remember that USA users are LG D820 and Europe/rest of works LG D821. I think its important for this part as the aerials connect here ans they are different in USA.
Good luck everyone
zeebo1111 said:
Hi,
My new USB flex arrived today. I installed it and found my screen is working perfectly.
The first pic is the same colour static that the op had.. Second one is the USB flex board / ribbon. Ebay for 20 Euro. Please remember that USA users are LG D820 and Europe/rest of works LG D821. I think its important for this part as the aerials connect here ans they are different in USA.
Good luck everyone
Click to expand...
Click to collapse
Hi,
sorry for reopen the topic but I really need to know if change de USB flex solve this problem
thanks
Static screen and freezing
Hi All,
Need help here with my 6 month old Nexus 5. It has been pretty good with no issues but since last evening, it started behaving weird. The chronological events are as follows
1. While browsing on Chrome some websites were not scrolling intermittently. This was only in the browser.
2. After about 10 mins of the above behavior the entire phone froze and didn't release itself. I had to force reboot by holding the power button down for about 10 secs. When the screen came on, it was the static screen
3. I again pressed the power button a couple of times but no use. Held it again for 10 secs, then phone rebooted and everything was fine.
4. Continued to use the phone and everything was normal until this afternoon, when the phone again froze while browsing a website
5. Since then the phone screen shows the static and if I press the power button once, the screen switches off and press again the screen comes on with the display showing properly. I can now only perform one touch which is registered and the screen freezes. If I switch off and on again the next screen / action is shown which is the action I did in the previous touch. Every time it registers one touch and I have to switch off and on again to see the next screen. Sometimes the phone just shows static and I have to wait a few seconds (30 sec) before using it again.
6. If I make a call to my phone, I hear one ring and then it is busy tone like I've cancelled the call. However the phone does not show the incoming call.
My phone has been intact and is well protected with screen guards and case. There is no physical misuse / abuse of the phone. I managed to shut down the phone and enter recovery. Here as well it only registered one touch, though the phone was processing and moving the next step. I somehow managed to initiate a factory reset through the settings, but no use.
Now in about 2-3 hrs the phone has become completely useless. I'm uncertain what the problem is, all my touch inputs are registered and processed. The screen just doesn't refresh to the next and requires a power off/on. I picked up this phone in the US and now in India. So I can't RMA the phone and I don't have warranty for this in India.
Any suggestion will be greatly appreciated.
Madzy said:
Hi All,
Need help here with my 6 month old Nexus 5. It has been pretty good with no issues but since last evening, it started behaving weird. The chronological events are as follows
1. While browsing on Chrome some websites were not scrolling intermittently. This was only in the browser.
2. After about 10 mins of the above behavior the entire phone froze and didn't release itself. I had to force reboot by holding the power button down for about 10 secs. When the screen came on, it was the static screen
3. I again pressed the power button a couple of times but no use. Held it again for 10 secs, then phone rebooted and everything was fine.
4. Continued to use the phone and everything was normal until this afternoon, when the phone again froze while browsing a website
5. Since then the phone screen shows the static and if I press the power button once, the screen switches off and press again the screen comes on with the display showing properly. I can now only perform one touch which is registered and the screen freezes. If I switch off and on again the next screen / action is shown which is the action I did in the previous touch. Every time it registers one touch and I have to switch off and on again to see the next screen. Sometimes the phone just shows static and I have to wait a few seconds (30 sec) before using it again.
6. If I make a call to my phone, I hear one ring and then it is busy tone like I've cancelled the call. However the phone does not show the incoming call.
My phone has been intact and is well protected with screen guards and case. There is no physical misuse / abuse of the phone. I managed to shut down the phone and enter recovery. Here as well it only registered one touch, though the phone was processing and moving the next step. I somehow managed to initiate a factory reset through the settings, but no use.
Now in about 2-3 hrs the phone has become completely useless. I'm uncertain what the problem is, all my touch inputs are registered and processed. The screen just doesn't refresh to the next and requires a power off/on. I picked up this phone in the US and now in India. So I can't RMA the phone and I don't have warranty for this in India.
Any suggestion will be greatly appreciated.
Click to expand...
Click to collapse
I'm getting the same issue. Tried soft and hard reset. Opened her up and seated all cables. The issue is still persisting. Is replacing the USB flex the way to go?
Hey I have a nexus 5 32GB and the screen started to do weird things and now it isn't working at all. Its the same in recovery mode also do I think that it's not a software problem.
I think there is an issue with the motherboard. Please help me out.
Thanks in advance.
nexus565 said:
Hey I have a nexus 5 32GB and the screen started to do weird things and now it isn't working at all. Its the same in recovery mode also do I think that it's not a software problem.
I think there is an issue with the motherboard. Please help me out.
Thanks in advance.
Click to expand...
Click to collapse
Most likely the flex cable
ふかつどう
Anyone seen this colored screen?. I have been getting this past 2 weeks when phone is charging and screen is about to turn off. I am on stock not rooted.
bullorbear said:
Anyone seen this colored screen?. I have been getting this past 2 weeks when phone is charging and screen is about to turn off. I am on stock not rooted.
Click to expand...
Click to collapse
Looks like the daydream function. You can turn it off in Settings>Display>Daydream
Sent from my Nexus 5 Unchained using XDA Free mobile app
Same thing, Screen now black. Won't turn on...
Hey everyone, I know that this is kind of late to the thread, but I have what I believe is the same problem as everybody else here. I had my Nexus 5 in my pocket for maybe five minutes, and in between the times that I put it in my pocket and took it out again to reply to a text, the screen went all colorful and static on me (Red tint, almost as if I had twilight on, but I didn't). I tapped the back, and the colors went back to normal, but the digitizer wasn't responding to touch. Then, It went black. No color, the speakers weren't working, neither was the backlight on the display. I took it apart, and figured its either the USB flex cable (which looked frayed), or the mainboard. If its the USB flex cable, then I know I can repair it. If it's the mainboard... well, as a sixteen year-old who has no current source of income, I'm out of a $400 phone.
Pictures attatched. Thanks!
rikudo said:
I'm getting the same issue. Tried soft and hard reset. Opened her up and seated all cables. The issue is still persisting. Is replacing the USB flex the way to go?
Click to expand...
Click to collapse
I took the phone the LG service center and the technician seemed to know this issue and immediately said that the USB flex cable needs to be changed. The entire fix took about 5 mins and the phone is working fine since then.
Sorry for the delayed response.
I hate to necro up this thread but I'm having similar problems to the op with my nexus 5. About two weeks ago I saw my screen get grainy just like the op and many others mentioned and then the screen went completely black. The screen still "turns on" but it's just black with the backlight on. I can hear notifications and other things and I'm hoping that all I need to replace is just the flex cable. If it's a problem with the logic board then I'm screwed basically.
Anyway that's my story. Bought the flex cable and it'll be here by tuesday so I'll find out then if I'm lucky or not. Fingers crossed.
pezkiln said:
I hate to necro up this thread but I'm having similar problems to the op with my nexus 5. About two weeks ago I saw my screen get grainy just like the op and many others mentioned and then the screen went completely black. The screen still "turns on" but it's just black with the backlight on. I can hear notifications and other things and I'm hoping that all I need to replace is just the flex cable. If it's a problem with the logic board then I'm screwed basically.
Anyway that's my story. Bought the flex cable and it'll be here by tuesday so I'll find out then if I'm lucky or not. Fingers crossed.
Click to expand...
Click to collapse
Hey man, did you ever try this out and get it to work? I have the same problem and was thinking of trying this out but wanted confirmation first.
Thanks!
Just wanted to post here to say that this thread just saved me a lot of money!
Had the same issue (static showing on the screen). Local phone repair shop told me it needed a new screen, without even looking at it(!), and it would be £120 + labour. Told them I would think about it, and came home and did some more research, found this thread. Ordered a replacement USB flex cable from eBay, and fit it by following a YouTube tutorial, and now the phone is back working fine. brilliant!
Thanks xda!
I had a problem where my screen looked like an old CRT TV with particles flashing all over on anything with a static dark background. Any ideas
Hey guys, i'll try to explain the situation as best i can below, hopefully someone can work out what is wrong.
My phone is about 16 months old. About 2 months ago i dropped it twice within the space of a couple weeks. There were a few cracks along the screen, however it wasn't very noticeable and i wasn't going to bother having it fixed. The problem started a couple of weeks ago when i went to grab it out of my pocket, however i found out the screen was black and it wouldn't turn on. I don't really know how to describe it but it was acting very strange...
- The screen would have white/gray bars all over it then turn off, then it would do the same with very thin vertical lines that were white/gray/other colours...
- When i get the screen on, it generally turns off again within 30 seconds, however it can stay on for a few minutes.
- If the screen is on and i press the lock button, it almost certainly won't come back on.
- Restarting the phone or holding the power and volume button nearly always gets the screen to come back on. It often then restarts but turns off again shortly after.
- The phone is otherwise still working when the screen goes off; the notification light stays on and i hear messages etc coming through
- The backlight often stays lit, revealing a gray screen opposed from total black. Sometimes it does not stay lit however.
- When the screen came on it was often unresponsive to touch
I had the screen replaced yesterday by a phone repair shop and the phone is still not right. I have factory reset the phone and also wiped the partition cache. Other than that it is still not working. IT seems to be working better... The screen always seems responsive to touch when it is on, and it doesn't seem to be turning off as often. It generally starts up and works fine when i start up by holding the power button and down volume button together... However even still it sometimes just flashes up with a few thick white/gray and black lines on the screen..
Does anyone know what can be causing this and how i can resolve it? If you need any more information please let me know and i will try provide it. I could try get some pictures of what the screen is doing when i finish work. Thanks guys, i appreciate any input.
EDIT: I managed to get a pic of what i mean by the thin vertical lines all over the screen. This just appeared when i tried to restart the phone after it the screen had once again stopped working. The imgur link is gIFMGD6
Anyone have any ideas?
Hey, did you ever figure this problem out? My phone just started doing the same thing. Can't find much info about it.
angrysammich said:
Hey, did you ever figure this problem out? My phone just started doing the same thing. Can't find much info about it.
Click to expand...
Click to collapse
Yeah, i had the screen fixed hoping it would fix it, however that didn't work. Turns out it was the motherboard, don't know what was wrong with it in particular other than it was simply going faulty. Had someone replace the motherboard on it for $50 and have had zero problems since! Hope that helps you.
Thanks for the response. I tried replacing the screen too with no luck. Unfortunately the same place that replaced the screen said it would cost $400 to replace the motherboard!!! The phone cost less than that so it looks like I'm gonna buy a new one.
ClangaBanga said:
Yeah, i had the screen fixed hoping it would fix it, however that didn't work. Turns out it was the motherboard, don't know what was wrong with it in particular other than it was simply going faulty. Had someone replace the motherboard on it for $50 and have had zero problems since! Hope that helps you.
Click to expand...
Click to collapse