The Gingerbread update was released today and I decided to give it a go.
So, I downloaded the LG Updater, downloaded the USB driver for my phone (LGP999), and then plugged my phone in and mounted it. My computer recognized the phone instantly, but the LG Updater would not recognized a device. So, I plugged it into different USB ports, restarted the app, redownloaded the app, and reinstalled the driver multiple times, but the app still won't recognize my phone.
I was wondering if anyone else ran into this problem and if they could help me out.
And if you did not run into this problem, how did you get yours to work?
I have not ran into this issue but try it without mounting the SD card.
I restarted my computer.
I just tried it and it still won't recognize my phone.
How did you get yours to work?
Related
I tried connecting my phone to my laptop today and it said installing drivers. It was working yesterday but today for some reason it was trying to install drivers again. It failed, so I downloaded the LG drivers and installed them but my laptop still tries to install the drivers and fails.
I already tried uninstalling the drivers and installing them again.
This is what it says under Device Status
This device cannot start. (Code 10)
EDIT: I got it working by turning on USB Debugging mode.
Sent from my LG-P999 using XDA App
by any chance did you ever figure this out? I flashed my g2x to hellfire ICS 4.0.4 and while I once was able to get the drivers to work, now I get the same error This device cannot start.
i have usb debugging and unknown sources enabled, but mass storage on my phone is disabled. is that related?
Ive tried removing and reinstalling drivers. Seems like I have some issue whenever I try to mount to my pc it refuses and starts slashing the usb connected at the very top bar and then back to disconnected. Ive tried different ports, different cables to no avail. Also...if I try to plug into the ports directly on my laptop..it will simply fail and say no drivers installed. Whe it is seen by the pc its telling me the Quallcomm driver are not there. It was such an issue that when I went to flash back to stock the computer wouldnt recognize it and I had to set up a second pc to flash back.
Seems windows has decided that it is a Qualcomm HSUSB device and wont mount on the second laptop now.
Does your phone power on? When people are hard brickdb thats the same thing thay happens
nah its up and running fine.
In that case very strange. Did u try deleting your drivers. Restarting your pc then installing kies?: it has the drivers you need
I had this problem before, what I had to do was remove any evidence of any Samsung Drivers on my PC, uninstall Kies. Then reinstall Kies, and keep it open while you connect your phone. That worked me, hope it works for you?
did you go as far as deleting everything from the registry? Ill do it Monday when I get to work as I didn't try the re installing on kies. Just odd.
No love and now same issue on two laptops. I have removed drivers and kies and tried reinstalling kies..removing installing drivers. What I AM seeing is
Even ID 5038 in the security logs
Code integrity determined that the image hash of a file is not valid. The file could be corrupt due to unauthorized modification or the invalid hash could indicate a potential disk device error.
File Name: \Device\HarddiskVolume2\Windows\System32\FsUsbExDisk.Sys
Other devices plug up to both laptops just fine??
i had something like this happen. and i had to remove all samsung drivers and and went into device manager and unistalled any updates. rebooted. ran the samsung drivers again. then rebooted. and it worked.
the other time this happened, i did the same procedure with the rebooting and installed keys and rebooted and left kies open while pluging it in (with a pc internet connection) and it searched and found the drivers online.
if you have tried both of those then im out of ideas.
hope it gets resloved.
I actually rebuilt an entire system to test it out..I have it working on it but its still not recognizing %100. Ill keep banging on it between user calls
*FIXED*
I recently blew away my pc and reinstalled windows. Now I cant get adb to recognize my infuse.
Device manager says "infuse 4g" under other and "the drivers for this device are not installed"
I have installed the Infuse USB drivers from samsung multiple times, rebooted my pc, updated driver, etc.
I have installed kies.
I have flashed my phone back to AEON 2.3.6 and adb recognized the device.
I flashed back to CM9 and it doesnt work
I can mount my SD cards and transfer files just fine.
Before I blew away windows everything worked.
Am I missing a driver, do I have the wrong driver? Or does CM9 not work with USB debugging yet?
NEVERMIND I FIXED IT
New windows installation didnt have updates enabled yet. When I turned on updates it found the drivers and works. Carry On
I need help connecting my internal storage to PC.
This had been working fine for me. I have the correct drivers installed and no issues until I flashed the rally stock rom. Since then I haven't been able to see my internal SD from the PC.
I have restored from backup and tried a few other roms and kernels but it still doesn't work.
I have tried it on other computers and with different cables and get nothing. The phone indicates that its charging so I know its plugged in but when I look in device manager nothing pops up. If it was a simple driver issue I know I would at least see the device in there.
I also tried Odin and it doesn't see my phone either. What the hell is going on here?
myeyez said:
I need help connecting my internal storage to PC.
This had been working fine for me. I have the correct drivers installed and no issues until I flashed the rally stock rom. Since then I haven't been able to see my internal SD from the PC.
I have restored from backup and tried a few other roms and kernels but it still doesn't work.
I have tried it on other computers and with different cables and get nothing. The phone indicates that its charging so I know its plugged in but when I look in device manager nothing pops up. If it was a simple driver issue I know I would at least see the device in there.
I also tried Odin and it doesn't see my phone either. What the hell is going on here?
Click to expand...
Click to collapse
PC probably dropped the drivers. I see it happen to mine now and then. I just put into download mode and plug in without Odin loaded and it refreshes the drivers.
Hi everyone! I've updated my Samsung Galaxy i9003L to 2.3.6 via Kies a few days ago, and USB connection has stopped working for seemingly no reason. The phone just charges but never mounts. Kies doesn't detect it either.
On Win7, when I try to connect I get the device listed as "Unknown Device", error 43. Have tried uninstalling USB drivers and reinstalling official Samsung drivers at least 5 times. Didn't work. Also, Kies doesn't detect the phone. Have tried running Kies' connection troubleshoot tool. Didn't work either.
I've tried connecting the device with 3 different USB cables (including the original Samsung one), and on different USB ports as well. Didn't work either. Also tried putting the device on USB Debugging mode, to no avail. I've also cleaned the USB port in the phone just in case. Problem persists.
My Linux netbook used to detect the device with no problem at all before the update. Now it doesn't detect it either. I've also tried my GF's Mac, but no dice. This makes me think this may be a phone error.
I've also tried the *#7284# USB/MODEM solution and rebooted my phone to factory settings twice already. Nothing seems to work.
I'd appreciate some help on the matter, this is driving me slightly crazy!
Kbuster said:
Hi everyone! I've updated my Samsung Galaxy i9003L to 2.3.6 via Kies a few days ago, and USB connection has stopped working for seemingly no reason. The phone just charges but never mounts. Kies doesn't detect it either.
On Win7, when I try to connect I get the device listed as "Unknown Device", error 43. Have tried uninstalling USB drivers and reinstalling official Samsung drivers at least 5 times. Didn't work. Also, Kies doesn't detect the phone. Have tried running Kies' connection troubleshoot tool. Didn't work either.
I've tried connecting the device with 3 different USB cables (including the original Samsung one), and on different USB ports as well. Didn't work either. Also tried putting the device on USB Debugging mode, to no avail. I've also cleaned the USB port in the phone just in case. Problem persists.
My Linux netbook used to detect the device with no problem at all before the update. Now it doesn't detect it either. I've also tried my GF's Mac, but no dice. This makes me think this may be a phone error.
I've also tried the *#7284# USB/MODEM solution and rebooted my phone to factory settings twice already. Nothing seems to work.
I'd appreciate some help on the matter, this is driving me slightly crazy!
Click to expand...
Click to collapse
that thing is pain,happened to me several times.first of all uninstall kies,then remove all drivers asosieted with you phone,you could do factory reset of your phone(not necessary in my case,but if other fails),then reinstall kies and drivers,gl.
Maybe at your firmware,try to install xxkpe+pit and flash ddlf2
Sent from my GT-I9003 using xda premium
xGiox said:
that thing is pain,happened to me several times.first of all uninstall kies,then remove all drivers asosieted with you phone,you could do factory reset of your phone(not necessary in my case,but if other fails),then reinstall kies and drivers,gl.
Click to expand...
Click to collapse
Hi! First of all, thanks for the help. I doubt this is a firmware problem, since neither mi Linux netbook nor a Mac computer detected the phone in any way, and they also used ot be able to detect it with no problem.