Database Info

[Q] G2x stuck at LG logo/cannot access recovery

Hey all
Before anyone mentions that i should be searching around more, i would like to say that i've been on multiple threads and they all state the same thing (use NVflash to flash CWM and then boot into CWM but the solution did not work for me past flashing CWM and then trying to access recovery after) and i wasn't able to find one that had a similar problem as mine.
I have CWM flashed through NVflash and was running CM7.1 RC1. I took a screenshot with the 'shootme' app and proceeded to look at the gallery to make sure it came out okay. The gallery crashed and i was sent to the home screen. I swiped to a different homescreen when my phone froze halfway through the transition to the next screen. No combination of buttons/long presses were able to get me out of it so i went ahead and did a battery pull. So my dilemma is that now i'm stuck at the LG boot logo with no blue status bar under it. It freezes there and will not do anything every time i boot up. volume down+power does not give me access to recovery nor does any other button combo get me past the LG boot logo.
Are there any other methods i might be able to use like ADB or what not to get myself out of this situation? or at least into recovery? Any comments or suggestions would be greatly appreciated as i've been searching for hours with little help and my eyes are starting to get strained.

hmmm.. I know it's a simple question, but I gotta ask.. are you holding the pwr and volume down button long enough? you have to keep holding it even after you see the LG screen.. Keep holding until you see the 2nd screen?
If so.. do the nvflash again? Edit: Not sure if I would do this without getting further guidance tho..

schmit said:
hmmm.. I know it's a simple question, but I gotta ask.. are you holding the pwr and volume down button long enough? you have to keep holding it even after you see the LG screen.. Keep holding until you see the 2nd screen?
Click to expand...
Click to collapse
This. I remember when I boot looped my phone I had the problem of letting go of the volume key too early, you need to hold down volume and power from a totally powered off phone until recovery actually starts and you see the green "android" logo of CWM.
Try re-flashing CWM, NVFlash CAN fail. There is literally nothing you can do within the OS that will prevent recovery from working. Either you did something wrong somewhere along the recovery process or you discovered an entirely new problem with the phone. I'm going to hazard a guess and say it's the former.

Thanks for the response guys. I wish that it was the case of not holding the buttons long enough. I have tried numerous times with the buttons held down for a long period of time. I even held the combo down for almost 5 minutes a few times.
Every time i try to boot up, it won't go past the LG boot screen so i would pull the battery out and go through flashing CWM through NVflash again. I'm sure I'm not missing anything because everything goes through and gets sent to the phone successfully.
I did happen to run into a thread that was closely similar to mine but his method was to just keep reflashing CWM and the stock recovery back and forth every time it failed until it turned on. I might have to try that if i cannot figure out this problem out soon. Not being able to use this phone is killing me! heh.

I just joined your club. Wow this sucks.

So apparently this is a whole new problem that's been found? Every other help thread seems to point to using NVflash or remaking the partitions due to a bad flash using an O2x based file instead of G2x.
But none of those solutions come close to doing anything. There has been some people with the same problem as me but aren't proactive at all enough to get someone's attention, so i'm guessing this problem is getting pushed to the side with people just going about getting their phones replaces/buying new ones.
I did happen to run into a thread on paulobrien/modaco's forum that had people using NVflash to get out of any sticky situation like this. It just reverts everything back to the stock factory settings but with root. We cannot use this though because he hasn't built it to be compatible with our LGP999's because everything was built for their UK LGP990's. Maybe that's a start to getting this solution fixed?

I hate to say this, bit you might have to call t mobile and get a replacement. Flash back to stock recovery and they won't know you messed with anything.
Sent from my Nexus 5g using XDA Ultimate App

Don't send back....you'll get same defacement a battery pull go into nvflah and go back stock then flash nv flash fix pArtitions

As I have mentioned before, NVflash does NOT give me access to my recovery let alone solve anything else. NVflash DOES work and does sucessfully send both CWM and the stock recovery but when I try to boot into either of them, let alone just power on normally, it simply DOES NOT go past the LG boot screen. it just hangs there doing nothing at all until I pull the battery out and do the same process over until it just hangs again.
while it is on/stuck at the LG screen, my computer does not recognize it so i cannot even try and run ADB commands. It does however, recognize it when I plug it in using the volume buttons held down when I use NVflash but there's nothing else I can do besides use NVflash obviously.

Jduhb said:
As I have mentioned before, NVflash does NOT give me access to my recovery let alone solve anything else. NVflash DOES work and does sucessfully send both CWM and the stock recovery but when I try to boot into either of them, let alone just power on normally, it simply DOES NOT go past the LG boot screen. it just hangs there doing nothing at all until I pull the battery out and do the same process over until it just hangs again.
while it is on/stuck at the LG screen, my computer does not recognize it so i cannot even try and run ADB commands. It does however, recognize it when I plug it in using the volume buttons held down when I use NVflash but there's nothing else I can do besides use NVflash obviously.
Click to expand...
Click to collapse
Did you ever find a solution to this issue? Because my phone is doing this...
I attempted to restore my phone back to the wrong backup that was from a galaxy sII (2.3.4 i think); needless to say, the restore failed. I then restarted my phone from CWM and it gets stuck at LG screen.
I have tried to NVflash back to stock; nothing. same thing reflashing back to CWM.
ideas?

have you tried this link out yet?
http://forum.xda-developers.com/showthread.php?t=1180331

same problem..... anybody find something to fix this yet?

From what I heard is that you need to remove the battery, then boot into recovery or something.
Sent from my G2X

Use smartflash for the p990 but only use the p999 ap.bin file which will put the rom and kernel back to stock p999.

Rom for recovery always fixes any soft brick back to stock 2.3.3 OTA. It's saved my phone multiple times from stuck on S/W screen to being stuck on lg logo or even the dreaded can't mount sdcard-cache errors in cwm.
Sent from my LG-P999 using xda premium

I used the following method when Clockworkmod became corrupted and was unable to mount my sd card. I had just wiped everything on my phone intending to install a new rom when the issue happened. I could not even get to the S/W upgrade screen. It saved my phone. Hope it works for you.
http://forum.xda-developers.com/showthread.php?p=17258229

jcbofkc said:
I used the following method when Clockworkmod became corrupted and was unable to mount my sd card. I had just wiped everything on my phone intending to install a new rom when the issue happened. I could not even get to the S/W upgrade screen. It saved my phone. Hope it works for you.
http://forum.xda-developers.com/showthread.php?p=17258229
Click to expand...
Click to collapse
omg thank you so much! It worked! Not only that but i was stuck on frodo 2.2.2 before which is why i was messing with my phone in the first place and now its on gingerbread. Awesome! thank you!!!!

sabotage99 said:
omg thank you so much! It worked! Not only that but i was stuck on frodo 2.2.2 before which is why i was messing with my phone in the first place and now its on gingerbread. Awesome! thank you!!!!
Click to expand...
Click to collapse
Glad for you that it worked.
Kwes1020 pointed me in the right direction last week. Be sure to give a thanks to ILUHA_89 who came up with the fix.

Amazing how people are soo lost without providing them link after link to other threads. They are soo lazy and can't follow simple directions, each time i get a new phone i go to that section on xda and soak up all the information as it usually is already there. It's just funny is all i guess.

d12unk13astard said:
Amazing how people are soo lost without providing them link after link to other threads. They are soo lazy and can't follow simple directions, each time i get a new phone i go to that section on xda and soak up all the information as it usually is already there. It's just funny is all i guess.
Click to expand...
Click to collapse
It's really not that big a deal. I was brand new to android once and asked all sorts of things.
I, like you, happen to read everything I can get my hands on. Some struggle going through all the info. I was here the day the forum opened, so I kind of remember where everything is.
Some are lazy and others just have no idea what the heck is going on and are intimidated by certain processes. I would rather help someone instead of listening to them ***** about their broken phone.

[Q] G2x Update Prob (Possible Brick)

Hey ppl. I have a really BIG problem with my G2x and I was wondering if you could help me out. I ran the LG Mobile Support Tool to update my G2x to 2.3.3. After the process, my phone is stuck on "S/W Upgrade Please wait while upgrading..."
I tried using to LG Support Tool and it's saying that I'm running V21e
I can't boot into recovery. All I get is "S/W Upgrade Please wait while upgrading..."
Before doing this I had done a backup through the recovery. How do I get it to bootup?
Any advice and assistance would be greatly appreciated.

I have the same problem! Stuck on "S/W Upgrade Please wait while updating..."

So pulling the battery out, unplugging the USB and pressing vol-down + power doesn't boot to recovery? Did it freeze at 4% or get all the way through and now you're having this problem?

I'd suggest shutting the phone completely off and trying to root it again using NVFlash: http://forum.xda-developers.com/showthread.php?t=1054492&highlight=nvflash
I think that's the only real option if you can't get into recovery. I'm not guaranteeing it will work, but it's worth a shot.
If you can get it rooted again and get back to CWM, flash 2.3.3 using this: http://forum.xda-developers.com/showthread.php?t=1179748 instead of LG's awful garbage updater.

deanp0219 said:
So pulling the battery out, unplugging the USB and pressing vol-down + power doesn't boot to recovery? Did it freeze at 4% or get all the way through and now you're having this problem?
Click to expand...
Click to collapse
It went all the way through.
I did the battery pull and pressed Power + Vol-Down and it didn't boot into recovery.

Same issue.
I've been working on this since about 1:00 PST.
I've tried 32 bit laptop. 64 bit desktop.
When I had initially got it going after about an hour, it basically had gotten to the "download" tab and constantly got stuck a 4%.
I have never had root on the phone, no custom roms or anything. Just a $543 brick.
Called LG was told to "Pull the battery and put it back in". Seriously? You guys had me on hold for 5 minutes and wasted 15 minutes of my time to tell me that?
Then I was told by the same guy if that doesn't work there are no other current workarounds other than sending the phone back to them.
No thanks.
Then I was live chatting with an LG guy named Jorge at the same time. He told me we needed to hard reset. Told him can't do that because the "S/W Upgrading" screen will just flash back after a power plus volume up hold. He said he believes we're having issues because it is so new, they seemed to have been blind sided by this. He said that they think that everyone was trying to update at the same time, possibly suggesting server overload.
Anyway, I've tried multiple computers, multiple USB ports on each. Multiple USB cables, and I even tried using a KDZ file that apparently housed the entire update. But for the life of me, I have no clue how to flash a .kdz file.
Any suggestions are MORE than welcome!
Thanks guys, and good luck.

deanp0219 said:
I'd suggest shutting the phone completely off and trying to root it again using NVFlash: http://forum.xda-developers.com/showthread.php?t=1054492&highlight=nvflash
I think that's the only real option if you can't get into recovery. I'm not guaranteeing it will work, but it's worth a shot.
If you can get it rooted again and get back to CWM, flash 2.3.3 using this: http://forum.xda-developers.com/showthread.php?t=1179748 instead of LG's awful garbage updater.
Click to expand...
Click to collapse
Did you try any of this?

deanp0219 said:
Did you try any of this?
Click to expand...
Click to collapse
Yea. I tried it and still nothing.

I'm at the same place. I have CWM installed and can access it. I've flashed different ROMS and tried to restore my old one. It all works, I'm sure, but I can't get past that S/W Update screen to find out!

Sorry guys, wish I could help more but I'm stumped. I'm sure there are people on here smarter than I am who can figure this out. It seems to be a widespread problem so hopefully someone will figure out a fix. Damn LG s/w updater. This isn't the first time it's bricked phones.
http://www.google.com/search?source...gc.r_pw.&fp=79f73547dc11dcbf&biw=1366&bih=667

I currently have the same problem, don't think there is a fix.

1 click recovery
http://forum.xda-developers.com/showthread.php?t=1056847

follow these steps... must have windows xp to work
http://forum.xda-developers.com/showthread.php?t=1179750

Working Solution!
Spunix said:
follow these steps... must have windows xp to work
http://forum.xda-developers.com/showthread.php?t=1179750
Click to expand...
Click to collapse
YOU ARE A LIFESAVER! It worked!!!
It really works just on a Windows XP.

See the sticky at the top of Q&A. http://forum.xda-developers.com/showthread.php?t=1180331

[Q] Help Help Phone keeps getting in clockwork recovery mode

HI ALL,
i have unrooted my phone and then i,ve updated my phone but i forgot to remove clockworkmodrecovery now when i reboot my phone it keeps getting in recovery mode
Is there anyone who can help me?

I have the exact same problem!
I've tried restoring a backup, rebooting the phone, turning it off, install update from sdcard, formatting cache...
None to any avail. Please help!
I've tried about every option now, I've even tried downloading a ROM and flashing it to the phone. It still boots into Clockworkmod.
Can I throw my phone in the trash now?
Edit:
I don't have windows XP, so nope to unbricking your O3D guide.

Sdcard
I can only put the rom at my external sdcard i don know how to put someting in the internal flash

I've now tried flashing KingDroid.
It's still in the bootloop.
Why does it seem like no one even cares about this thread?

FPtje said:
I've now tried flashing KingDroid.
It's still in the bootloop.
Why does it seem like no one even cares about this thread?
Click to expand...
Click to collapse
People care but if they don't have an answer for you it's not much they can do, tried pulling the battery I guess and using CWM to reset battery data and reseting to factory defaults etc?

People arent answering because there is already a guide on the forum explaining exactly how to fix this.
Sent from my LG-P920 using XDA Premium App

Echts said:
People care but if they don't have an answer for you it's not much they can do, tried pulling the battery I guess and using CWM to reset battery data and reseting to factory defaults etc?
Click to expand...
Click to collapse
I have tried about every single option in the CWM menus, and I've tried pulling the battery at random times.
None of them worked.
I'm now going to remove Arch Linux from my PC to make room for windows XP. Sorry for my previous outrage.
Next time remove CWM from your phone before updating...
I just installed windows XP and followed the guide to the letter. I am now stuck with the firmware update screen. How do I get rid of this?

Flash rom
I,ve managed to flash the rom with the original v10D but itś still booting in clockwork recovery mode pfffff

These phones really are hard to unbrick.

Tell me please how to exit Rekaveri. Reloading and pulling the battery does not helps, it means everything? brick?

serano3d said:
Tell me please how to exit Rekaveri. Reloading and pulling the battery does not helps, it means everything? brick?
Click to expand...
Click to collapse
If you're stuck at the "updating firmware" screen like me, you're simply ****ed.
http://forum.xda-developers.com/showthread.php?t=1197108
use LG vip service.
I just called them, they said they'd "assess" my situation and that they'd call me back to tell me whether they'll replace it...

restore
Hi,
I have managed to restore a backup image but he is still booting in clockwork recovery what am i forgetting ????
Sincerely Snellie1972

Recover
I have recovered the phone with clockwork recovery with stock file
Optimus 3D 10D pre-rooted CWM restore but still it goes in too clockwork recovery at boot
What am i doing wrong ????
Thanks in advance
snellie1972

Unfortunately I was also able to get passed the clockwork screen but the phone is stuck on the update just like anybody else. I contacted the store where I bought it from and they sent me a prepaid box already to send it to them for repair/replacement.
As everyone says, at the moment it's not possible to recover from that state, sorry snellie.
If you still get the clockwork, then just follow these instructions but even so, you wont get passed the software update screen.

Flash
I have managed to flash using first de KDZ tool from LG en after that i have used te LGMOBILE update tool and just put in my imei and serial and it was downloading and restoring my phone so far so good but when it was Finished without any error it is still haging on update software ...
I don't understand why it is not going any further
Greetz
snellie1972

It's almost as if this firmware update screen is fake and an indicator for LG to see you ****ed your phone up.
Is there any known hacker even working on this?

[Q] Bricked an LG P505

How do I unbrick an LG P505? I rooted it, deleted a bunch of apps that I never used and when I deleted Nuance something or other it kept giving me an error telling me it had stopped working (apparently it was running on the background) and I couldn't get it to shut up so I shut off the phone. When I turned it back on again it was stuck on the android logo.
I've tried hard reset, but it gave me an error right after the LG setup thing and now whenever I try it again it gets stuck on the android logo screen again.
Any help?

Shyin said:
How do I unbrick an LG P505? I rooted it, deleted a bunch of apps that I never used and when I deleted Nuance something or other it kept giving me an error telling me it had stopped working (apparently it was running on the background) and I couldn't get it to shut up so I shut off the phone. When I turned it back on again it was stuck on the android logo.
I've tried hard reset, but it gave me an error right after the LG setup thing and now whenever I try it again it gets stuck on the android logo screen again.
Any help?
Click to expand...
Click to collapse
Are you having custom recovery or stock one? And what error did you get when you tried to start recovery
Sent from my LG-P500 using Tapatalk

I didn't get to install custom recovery. Right now I managed to get to the fastboot mode screen, but I'm not sure that's gonna help in any way...
How do I start recovery?

Shyin said:
I didn't get to install custom recovery. Right now I managed to get to the fastboot mode screen, but I'm not sure that's gonna help in any way...
How do I start recovery?
Click to expand...
Click to collapse
To start recovery hold volume down +home+power until it comes if recovery starts means u are not bricked but if you are getting fastboot error means your mobile is bricked to unbrick follow this tutorial http://forum.xda-developers.com/showthread.php?t=1088046 and be sure to see every page of the thread for problems that may occur while doing it and their solutions
It works with p500 but I don't know about p509...
Sent from my LG-P500 using Tapatalk

sachin kamboj said:
To start recovery hold volume down +home+power until it comes if recovery starts means u are not bricked but if you are getting fastboot error means your mobile is bricked to unbrick follow this tutorial http://forum.xda-developers.com/showthread.php?t=1088046 and be sure to see every page of the thread for problems that may occur while doing it and their solutions
It works with p500 but I don't know about p509...
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
HOLY CRAP MAN IT WORKED!
Thank you very very very much!

p505r stuck at lg screen after fastboot fix wiped everything
my wifi kept saying error so I thought id try flashing my phone to a new rom/kernel and I was stuck in fastboot mode as well, I came upon this fastboot fix using cmd etc and it deleted all files on my p505r, and now I can get it to emergency mode OR it stays stuck at the lg logo... and no I cant get into recovery, it loads the android and box thing a progess bar shows up for 3 seconds then the phone reboots again...
im really running out of ideas, can someone please help??? I would really like to give my mom back her phone asap...
so to cover everything again:
phone can go into EMERGENCY MODE or be stuck at the lg logo... no other option is available...

I think my lg g2x is bricked (im kind of a noob)

What i did before this problem
1.used the lg support tool to go from froyo to gingerbead (worked great)
2. attempted to use clockwork rom to install icecream sandwhich based rom (it failed)
What i get now
1.If i turn my phone on like i always would i would get the lg logo, and it would stay like that forever
2. if i try to boot into recovery i get "s/w upgrading"
I contacted lg and they said to send it in and wait 2 WEEKS to get it back and there may be an additional charge
Can someone please help me fix this without going to lg. I just want to be able to use my phone again :'(

run this:
http://forum.xda-developers.com/showthread.php?t=1590523
I did the exact same thing to my phone the other day. Then install the new rom via clockworld after its done.

But if you installed the 2.3.4 then don't update to any rom besides the kwes 2.3.4 because anything else you won't have audio or anything while in call there is no fix for it yet besides using kdz to downgrade.
Sent from my LG-P999 using xda premium

bj83gc said:
run this:
http://forum.xda-developers.com/showthread.php?t=1590523
I did the exact same thing to my phone the other day. Then install the new rom via clockworld after its done.
Click to expand...
Click to collapse
I tried it and it didnt help.
if i do a normal boot i get the lg logo wiht a loading bar that eventual stops and does nothing
if i boot into recovery i get "s/w upgrading" again

you have to use nvflash to snap it out of that... I remember i had it stuck on that for awhile until i flashed the stock recovery/bootloader stuff and then reflashed cwm and then it finally came to

NVflash CWM from http://forum.xda-developers.com/showthread.php?t=1566681
if you're unsure of the APX drivers set-up you have a more basic guide here:
http://forum.xda-developers.com/showthread.php?t=1056847
Remove the battery.
Plug in your USB cable to your PC.
Hold Volume Up and Volume Down at the same time keeping them held down.
Plug in the USB cable to your phone. (Keep the buttons held until Windows detects a new APX device.)
Open Device Manager in Windows and you should see "APX Device" listed with an error icon.
Right click on the APX device.
Select 'Update driver software'.
Select 'Browse my computer...'.
Select 'Let me pick...'.
Select 'Have disk'.
Browse to directory you extracted the *driver* software to: One-Click-G2x-recovery-flasher-09-23\APX.
Accept any warnings, including the big red alert (you may need to disable UAC).
Now in Device Manager under 'USB Controllers' you should have an 'NVIDIA USB Boot-recovery driver for mobile devices'.
If not, uninstall the driver, reboot, rinse and repeat.
Click to expand...
Click to collapse

Волк said:
NVflash CWM from http://forum.xda-developers.com/showthread.php?t=1566681
if you're unsure of the APX drivers set-up you have a more basic guide here:
http://forum.xda-developers.com/showthread.php?t=1056847
Click to expand...
Click to collapse
No change, thanks for trying :'(

just keep dicking around with NVflash... its the only way you can wake it up from a soft brick of that form

JHaste said:
just keep dicking around with NVflash... its the only way you can wake it up from a soft brick of that form
Click to expand...
Click to collapse
like what, what do i do. i am a total noob.

johnlicoski1204 said:
like what, what do i do. i am a total noob.
Click to expand...
Click to collapse
I don't think you're booting the phone up into cwm the right way.
Lol do this:
Make sure phone is off. While the phone is off hold down the volume down button.
While still holding volume down, hold the power button.
Continue to hold BOTH the volume down and power buttons. When the SECOND LG logo appears, let go of both of the buttons.
And no offense, but if you're not comfortable with modding your phone... you really shouldn't do it or ask someone else who knows what they're doing to do it.

buru898 said:
I don't think you're booting the phone up into cwm the right way.
Lol do this:
Make sure phone is off. While the phone is off hold down the volume down button.
While still holding volume down, hold the power button.
Continue to hold BOTH the volume down and power buttons. When the SECOND LG logo appears, let go of both of the buttons.
And no offense, but if you're not comfortable with modding your phone... you really shouldn't do it or ask someone else who knows what they're doing to do it.
Click to expand...
Click to collapse
Agree modification to a cellphone can be risky.
Sent from my LG-P999 using xda premium

From my personal experiance with the G2x (i thought i had bricked my phone), i have discovered that it is nearly impossible to brick this phone. I had ran the g2x nullifier and fully wiped my phone clean. When I power up the phone, all i get is the initial white LG logo. Luckely, i discovered the following thread that got my phone functional again:
http://forum.xda-developers.com/showthread.php?t=1248644
Try the above thread and see if your phone gets recovered to a functional state.

dot64 said:
From my personal experiance with the G2x (i thought i had bricked my phone), i have discovered that it is nearly impossible to brick this phone. I had ran the g2x nullifier and fully wiped my phone clean. When I power up the phone, all i get is the initial white LG logo. Luckely, i discovered the following thread that got my phone functional again:
http://forum.xda-developers.com/showthread.php?t=1248644
Try the above thread and see if your phone gets recovered to a functional state.
Click to expand...
Click to collapse
That script is perfectly fine and didn't hurt your phone at all. It states that it will wipe everything out even the rom you were previously on. So when the phone rebooted it stayed on that LG logo because it didn't have a rom to bootup.
At that point a quick battery pull and reboot into recovery was all you needed to do.
Sent from my LG-P999 using xda premium

Try flashing the stock recovery thru the one click nvflash utility and leave it off for a few min. Then run the g2x batch cleanup tool and see if it then let's u boot into the recovery. (By holding down volume - when hitting power on)
Sent from my LG-P999 using XDA

johnlicoski1204 said:
What i did before this problem
1.used the lg support tool to go from froyo to gingerbead (worked great)
2. attempted to use clockwork rom to install icecream sandwhich based rom (it failed)
What i get now
1.If i turn my phone on like i always would i would get the lg logo, and it would stay like that forever
2. if i try to boot into recovery i get "s/w upgrading"
I contacted lg and they said to send it in and wait 2 WEEKS to get it back and there may be an additional charge
Can someone please help me fix this without going to lg. I just want to be able to use my phone again :'(
Click to expand...
Click to collapse
Ok, so then its safe to assume that you rooted your phone first? Then you set up your phone by using nvflash so you can use ClockWorkMod (CWM)? Then booted your phone into recovery and tried to install ICS? If not done in this order then thats your fault. If you did it in this order then you missed something.
A common mistake is trying to install a ROM via CWM while the phone is running. When you do this the phone restarts and gives you the error triangle with android underneath it.
http://forum.xda-developers.com/showthread.php?t=1039985 Tells you how to do as well as provides links to everything it doesn't.
As for recovery they provisded the right link. Follow it to the "T" and you'll be ok.

Try the link below
johnlicoski1204 said:
What i did before this problem
1.used the lg support tool to go from froyo to gingerbead (worked great)
2. attempted to use clockwork rom to install icecream sandwhich based rom (it failed)
What i get now
1.If i turn my phone on like i always would i would get the lg logo, and it would stay like that forever
2. if i try to boot into recovery i get "s/w upgrading"
I contacted lg and they said to send it in and wait 2 WEEKS to get it back and there may be an additional charge
Can someone please help me fix this without going to lg. I just want to be able to use my phone again :'(
Click to expand...
Click to collapse
Hope fully this fix your issue: http://www.youtube.com/watch?feature=player_embedded&v=TozZKt7_JD8

d12unk13astard said:
That script is perfectly fine and didn't hurt your phone at all. It states that it will wipe everything out even the rom you were previously on. So when the phone rebooted it stayed on that LG logo because it didn't have a rom to bootup.
At that point a quick battery pull and reboot into recovery was all you needed to do.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
But the key issue was that CWM recovery was destroyed as well after nullifing thus leaving me in a stand still to do something. nvflash was the only thing left to recover the phone at that point which worked very well.

There is pretty much no way that after running either the One-Click or Cleanup Batch that he can't get the phone into CWM unless there is a hardware problem. This most likely means that the problem isn't with the scripts or phone, but with the procedure he is attempting.
Even if nullifier (which I don't think is of much use here) had wiped all partitions, the NVFlash will still pop you out of it and leave you with a working CWM.
So keep reading and keep watching videos of how to do it and make sure your drivers are correct. READ a bunch first.
And remember that he got here due to an LG software problem or issue with operation, not from trying to flash as a noob, so he knows he's in over his head right now.
Remember, we all had to start swimming somewhere and it usually wasn't pretty at first. Mine was a corrupted Motorola RAZR.

It appears that this is an older post, but if you are still having this issue, then maybe I can help. If anyone else finds this later, hopefully it helps them as well. I just did something similar and I thought I was screwed. I rooted my phone, installed a ROM (Hellfire... nice ROM BTW), then I got the nullifier. I installed the ROM before I ran the nullifier because I wanted to make sure the ROM worked. However, after running the nullifier, the ROM didn't work.
The only thing that I could get to show was the LG logo at the startup... no second logo (Blue LG), no SW upgrade... NOTHING. The phone wouldn't do anything else. Luckily, I wasn't the first to have this issue and they found the solution...
forum.xda-developers.com/showthread.php?t=1566681
Since you have already done other steps, I am assuming that you already have the drivers installed. So, the only thing you should need to do is download the ROM then install it by clicking flash.bat. The instructions on the page are pretty easy to follow.
No need to deal with the NvFlash until AFTER you do the above procedure. You will need to run it again after the above procedure because it puts it back in the original state (pretty much). The NvFlash will give you the superuser and Clockmod back. You should be good to go after that.

There is no way u can brick the g2x......even if u wanted to.........keep messing around
Sent from my cm_tenderloin using xda app-developers app