When I hit my earphone button, nothing happens...I would love it if it would activate voice command....any suggestions?
Thanks!
fernandosaez said:
When I hit my earphone button, nothing happens...I would love it if it would activate voice command....any suggestions?
Thanks!
Click to expand...
Click to collapse
To help, you should tell us that your using ROM.
Ciao
tHANKS FOR ANWSERING.
I have tried it with to roms: Rajus 7.4
and now with psidoc wm5 matrik edition...same thing in both!
Help..please!
Mapping the Headset button,
Actually, thats a good point, but i dont think it is going to be that easy. During a call, the headset button puts the call on hold, and is equivalent to the green button on the phone. As far as i remember there was a thread somewhere a year or so back, and no-one managed to get the button to launch VC. However... that was before WM6
In the meantime, i can only suggest mapping the backlight button to VC.. Thats how i do it!
for me, I just simply press the headset button, and it activates VC immediately. I'm using the Beasty ROM, and a Pantronics headset
Well I changed to the beasty rom, and you are right..it works!
Execept- The button still dosent activate VC, I use the "light" button as someone mention before (thanks), but now my earphone mic does listen to it.
So any clue as how to get the button on the mic to work?
Ideally it would work like this.
Press to answer phone
Press and hold to activate VC
I ride my bike everywhere and that is why this would be IDEAL
THANKS!
Unfortunately, I don't think it's possible to map it like that, the headset button only recognizes press(or in my case, press and hold to avoid mis-clicks). I did it by mapping the button formerly titled "Record"(the one right next to the camera) to VC, and now it works like a charm. Maybe you should try that too!
That's odd - I've always had the ability to use the button on the headset to either launch VC, or answer/end a call without having to do anything special at all.
Maybe it's something to do with the headset you are using? I've got a few, and a Parrot car kit, and they all work in this way.
Cheers,
Steve.
Bluetooth & Wired differences!
Lets tidy this up. I believe that we are crossing lines a bit....
The BLUETOOTH headset button often activates VC... thats not primarily the problem. I believe the problem is the wired headset... that one is the one a lot of people use, and i havnt found a way to make that launch the listening feature of VC as yet.
StevePritchard said:
That's odd - I've always had the ability to use the button on the headset to either launch VC, or answer/end a call without having to do anything special at all.
Maybe it's something to do with the headset you are using? I've got a few, and a Parrot car kit, and they all work in this way.
Cheers,
Steve.
Click to expand...
Click to collapse
oh, that.
It won't work, I'm afraid. That button only acts as an answer/disconnect button, no special functions, and it can't be mapped to anything...
Thanks for answering...so the question...or solution is.....
Whar are the best bt STERIO earphones the except VC buttom mapping?
Million dollar question...
Try googling around!
I can't recommend STEREO BT headsets, I haven't seen any so far, even though I know they exist. Right now, I'm using a Plantronics headset, which is very comfortable, but the transmission power is a bit low, meaning I get some static even with the phone in my pocket, and the headset in my ear...
Been googling..so far NOTHING!
how about this string: bluetooth headset stereo review ?
Headset
mzalan said:
how about this string: bluetooth headset stereo review ?
Click to expand...
Click to collapse
I actually use a conceptronic stereo headset, and that works fine out of box!
Firstly - hello all! What a great forum, I've gone from knowing nothing about Windows Mobile to having a fully customised Raphael in about 48 hours!
But: I have a set of Motorola S9 Bluetooth headphones which work excellently (although I haven't yet made or received a call using them). I also have a Sony a2dp Bluetooth headunit which also works excellently.
However .... As a matter of course I use the one touch power button to lock/standby, and when I press play/pause on either bluetooth device it automatically unlocks the phone.
When I'm driving this isn't such an issue as I will be ordering a Brodit Car Cradle very soon. But when I have the handset in my pocket using the S9 having it unlocked is a recipe for unwanted screen presses. I use the Touch Media Player (I know it's not the best but it seems to work OK for what I want) and the handset switches to the Music screen automatically (as well as unlocking) whenever I press play/pause. So theoretically it's pretty likely that it's only the media player that will get messed with, but you never know...
So my question is: Is there any way of stopping it from unlocking like this without introducing extra locking/unlocking complications?
hi
im using the Jabra BT3030, that uses A2DP aswel, on my touch pro and my phone stays locked when i start stop use the voice dailing, changing volume or song.
the phone turns on that is true, are u sure u are using the lock function
to realy lock ure phone u have to press and hold the end call button for 2 seconds(lower right button). if that button is not set to lock u can change that in ure phone settings under settings>long press end key there u can chose lock device
i hope this helps, let me know
WildFire
Yeah, I'm using SonyEricsson HBH-DS980, and for me too the phone only turns on upon play/pause etc., but does not unlock.
Have you guys had any problems with receiving/making call using your headests? I have a problem that after a few minutes into a call my headset disconnects, although BT stays on, and I have to restart the headset to re-acquire BT-lock. And it keeps doing this every few minutes. Highly annoying - renders my headset completely useless for phone calls (luckily it still rocks for listening to music).
Mine does the same. Both with my HBH-DS970 and with my HTC BT headphones. I tried the long-press end key lock which works, but prevents me from changing tracks using the HTC headset, yet the volume control works. Weird huh?
I haven't tried the long end key press to lock the device. But thats because I use that for switching on vibrate mode.
Anyone got any other suggestions?
I'm using the motorola S9 too, and my TP doesn't unlock when I press play/pause.
Note that I've installed Answerkeydisabler and Advanced Config Tool and played with locking/screen-off, and may have activate some options leading to this behaviour...
ross
u can always set the long key to "always display the quick list" so u can chose to lock ure device or set ure vibrate ringer
also u can just use the volume keys to change ure ringer to vibrate/sound to
I am now using the quick list so it sort of solves the problem. But it still seems a little awkward compared to just pressing the power button once and not having the a2dp commands reactivating it.
Are we saying that this cant be done?
Any ideas?
On a Fuze, when you're on a call, you can hit the Speaker button to turn on the speakerphone feature. And you can turn it off by hitting the button again. That works great.
Now, pair a Bluetooth headset.
Switching from headset to speaker phone takes many steps: Menu>Headset Off. Hit Speaker phone on button.
Does anyone know of a way to switch the headset on/off like speaker phone? In an ideal world, I'd replace the Video Sharing button with a headset button.
I've hunted around but not found anything remotely similar to this, but I can't be the only one with a problem.
Any suggestions?
Really? Nobody else gets annoyed switching from Speaker to Headset?
Bump. Bump.
Hi,
since I switched to MSVC the cable headset button refuses to work for activation of voice command recognition. It did though beforehand when using Cyberon Voice Speed Dial. Switching back to this software does not help either as it stopped working then, too. Anyone any ideas how to solve this issue?
CU,
Cactus World
P.S. Pressing two times the button in a quick row still activates the redial feature as pressing it for a longer period during a call hangs up the call.
SOLVED: Putting a string value registry entry named "Path" with value "\Programme\Voice Command\VoiceCmd.exe" into HKLM\Software\OEM\VoiceCommand makes the cable headset button work flawlessly thus initiating MSVC on long press as desired.
Thanks, works like a charm !
Hey there... I'm experiencing a problem with WM6.5... I'm using CVSD and it triggers only on holding the call button on the phone... When I hold button on my BT headset/carkit the only result I get is a single blink from the BT icon on taskbar.... Anyone has EnergyROM Mercury and can report it working/ not working on HTC Touch Pro T7272?