hello XDA.!!! well i just got in my mail today my skinomi techskin black carbon fiber skin and thought i might as well show you guys if anybody is interested in buying this skin ( comes with screen protector as well). as you can see i didn't cover up the with google (just to see how it looks).
The skin itself feels good in hand and the carbon fiber skin has a cool effect when put in sunlight. The skin doesn't add any bulk well maybe just like a little little you cant feel it at all. the little pieces that go around the phone where the hardest ones to put on the phone since it was hard lining them up so they wouldn't over lap each other. the carbon fiber skin also included there screen protector( like invisible shield). i have used there screen protectors before on my mytouch 4g and i really liked there screen protectors and how they felt. they do get the orange peel effect but let it sit there for maybe a whole night or 2 and it should look clear and good. overall im content with my purchase it was 25.50 in total i believe with shipping included its not a cheap skin but i think its worth it if you would like to make your g2x look sexy. my rating from 1-10 is a solid 9 for the fact that its kind of difficult to put on but with patience an empty room, no kids screaming , little bit of music, and around 30 minutes of your time you should be solid. to conclude its a great skin will prevent scratches on the back, sides , and screen but will not prevent screen cracks or anything of that sort since ITS NOT A CASE. Well hope you understood my review since its my first one.
oh and you can pick this up from amazon or skinomi website.
well heres the package you receive in the mail.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and heres how it looks like when you take it out.
Whats inside the tube.
well the installation of this skin was rating from dificult level 1-5 i rate a 4 because its a really sticky material (3m material) so it took me about 15 min to do the back just right. even tho i tried my best i know i messed up a little.
heres a look of the back.
another look.
Heres the final skin put on the phone and the rest of the pics. Taken with my dads blackberry sucky pics i know.
Thanks for the great review with pics.
Do you think it would be difficult to remove this skin after some time without actually causing some superficial damage to the stock body?
mmapcpro said:
Thanks for the great review with pics.
Do you think it would be difficult to remove this skin after some time without actually causing some superficial damage to the stock body?
Click to expand...
Click to collapse
your welcome.
i think it would be kind off hard but no damage.
I'm on day 2 so far so good.
Sent from my LG-P999 using XDA App
I'm thinking about getting this, AND a case. My baby needs maximum protection!
Sent from my LG-P999 using XDA App
This skin is pretty cool stuff. With patience you get a perfect result! Minor gaps between the single foils, however, it feels worthy and the device is nicely protected without loosing its sleek design.
Perfect for me!
No additional case needed. I am keeping the Phone in my trouserpockets without worries.
Sent from my GT-I9100 using XDA App
FatalityBoyZahy said:
I'm thinking about getting this, AND a case. My baby needs maximum protection!
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
It's really worth it. It gives a nice look and feel to it and it protects from scratches. I say you grab one they have life time warranty.
Sent from my HTC Sensation 4G using XDA App
I picked up the dark wood grain pattern skinomi when i first got my g2x. So far i'm two months in and pleasantly surprised. it's a lot of moolah for a skin if you ask me, but the lifetime warranty sold me on it. It is one of the more difficult ones i've put on, but the pieces fit ok. Had a bit of trouble with the corners coming unstuck, but a few minutes of pressure secured them. I would definitely suggest a clear hard case to go over the skin if you are one to keep it in your pocket. Otherwise, you will get bits of lint/dirt stuck around the edges and it is unseemly. just my $.02, but if you've got the dough to blow (i used a gift card) then give it a shot.
I'll most likely order this once I recieve my replacement G2X.
Sent from my LG-P999 using XDA App
Related
So, here it is... And it looks pretty tight. My question is, has anyone else gone this route yet?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I was watching the installation video to see the coverage, and it appears that the back, top side and bottom are all separate, and w/it being black on black, it's kind of hard to see what it leaves uncovered. I don't want my phone to look ghetto fabulous, like I just patchworked this on one night after watching a fast & furious marathon drunk w/gaps on every edge.
Anyway, if anyone has, let me know. If not, I'll jump in and try it out and post photos and give my 2 cents.
RhynosAndroid said:
So, here it is... And it looks pretty tight. My question is, has anyone else gone this route yet?
I was watching the installation video to see the coverage, and it appears that the back, top side and bottom are all separate, and w/it being black on black, it's kind of hard to see what it leaves uncovered. I don't want my phone to look ghetto fabulous, like I just patchworked this on one night after watching a fast & furious marathon drunk w/gaps on every edge.
Anyway, if anyone has, let me know. If not, I'll jump in and try it out and post photos and give my 2 cents.
Click to expand...
Click to collapse
I've had something similar to this, but it was called PhantomSkinz. I had it on my G2, and myTouch 4G. Both felt great at hand.
Glad to hear from someone that has had something similar. Not like I'm going to need much to twist my arm to get it, but it certainly helps to get feedback.
those who have a carbon fiber skin, please post a pic if you dont mind
c19932 said:
those who have a carbon fiber skin, please post a pic if you dont mind
Click to expand...
Click to collapse
From the pictures I see it does not cover the phone.
Sent from my LG-P999 using XDA Premium App
Why in the world would they make a piece to cover the metal Google plate. That's one of my favorite parts of the look of this phone.
Sent from my LG-P999 using XDA Premium App
F0rgiven said:
Why in the world would they make a piece to cover the metal Google plate. That's one of my favorite parts of the look of this phone.
Sent from my LG-P999 using XDA Premium App
Click to expand...
Click to collapse
That's actually one of the benefits of having all the pieces separate, the piece that would cover the metal strip is separate. I agree with you, but I plan to keep the metal strip shown, even if I have to use an exacto knife to make it happen.
Sent from my [rooted] LG-P999 using the XDA App.
3m dinoc can be bought in small amounts, cut it to size and profit. Way cooler than the pre cut options I've seen for phones.
Sent from my LG-P999 using XDA App
AdamHart612 said:
3m dinoc can be bought in small amounts, cut it to size and profit. Way cooler than the pre cut options I've seen for phones.
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
I agree... And upon taking your advise, I just bought a 12"x48" sheet of it from ebay. I worked w/vinyl for several years, from custom applications made in-house to pre made applications, so I'm comfortable w/the whole process. The saddest part is, w/o your input, I probably never would've thought of it on my own!
I'm excited, now I can make it fit how I want! PLUS, it was less and I have enough, that I can customize friends phones if they like the look of it... For a modest price of course. <hehhehhehhehheh>
RhynosAndroid said:
I agree... And upon taking your advise, I just bought a 12"x48" sheet of it from ebay. I worked w/vinyl for several years, from custom applications made in-house to pre made applications, so I'm comfortable w/the whole process. The saddest part is, w/o your input, I probably never would've thought of it on my own!
I'm excited, now I can make it fit how I want! PLUS, it was less and I have enough, that I can customize friends phones if they like the look of it... For a modest price of course. <hehhehhehhehheh>
Click to expand...
Click to collapse
pics after you finish please, I may want to be put down as a friend.....for a modest price of course
snp304 said:
pics after you finish please, I may want to be put down as a friend.....for a modest price of course
Click to expand...
Click to collapse
absolutely. i'm interested too! enuff of this "carbon look" and "carbon feel" and "carbon printed" and "leather stitched to look like carbon"; i want the REAL deal (to match my car and bike, my money clip, my well, you get the point lol)... and would prefer it to be a hard rubber case with that around it (guess i could buy a black case that i want and wrap that instead too); but keep us updated and lemme know if you'd wanna make another to sell if it works out or have "extra materials" looking forward to the pics! good luck!
I don't like this one !
BUT
CHECK MY:
http://forum.xda-developers.com/showthread.php?t=1085373
Well, I got the Carbon Fiber vinyl sheet in [12"x48"]. Looks good, now it's time to waste about a foot of it while I perfect the stencil.
http://www.ebay.com/itm/BLACK-HARD-...ccessories&hash=item45fe9d3624#ht_4171wt_1163
Doesn't it look like the Otterbox Defender?
At first looks cool, but then after a close look it kind of makes the phone look bulky
Looks exactly like what the Defender would be but Otterbox hasn't released a Defender for our Sensation. I wonder if these are from a batch of prototypes Otterbox had produced but decided not to market? I would love to hear from anyone who tries this. I might take the plunge myself as a matter of fact.
Sent from my HTC Sensation 4G using xda premium
lavafire said:
At first looks cool, but then after a close look it kind of makes the phone look bulky
Click to expand...
Click to collapse
Yeah, I thought the same. They also have one with the silicone black and the plastic white. It looks appealing but i'm not too sure. I was hoping someone had it.
jlczl said:
Looks exactly like what the Defender would be but Otterbox hasn't released a Defender for our Sensation. I wonder if these are from a batch of prototypes Otterbox had produced but decided not to market? I would love to hear from anyone who tries this. I might take the plunge myself as a matter of fact.
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
I'm with you. Also, its being shipped from the states so it adds to the possibility that it might be a prototype. I would buy it, but the seller doesn't refund.
Ordered it today.
Sent from my HTC_Flyer_P512_NA using xda premium
i can understand protecting your phone is important. but come on. that looks horrendous. lol
barrist said:
i can understand protecting your phone is important. but come on. that looks horrendous. lol
Click to expand...
Click to collapse
The Otterbox Defender is one of the most popular tough cases for any device. Unfortunately it isn't made for the Sensation but this looks exactly like what it would be if it were actually made.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.otterbox.com/HTC-EVO-3D-...EVO3D_color=20&start=1&cgid=htc-evo-3d-cases
http://www.ebay.com/itm/BLACK-HARD...ccessories&hash=item45fe9d3624#ht_4171wt_1163
Sent from my HTC_Flyer_P512_NA using xda premium
Mine arrived this morning.
I had a Defender for my iPhone, which saved it a couple of times (mainly from beer spillage) so I wanted something similar and this appears to be the only option until a more established manufacturer pulls their finger out!
So, here are my thoughts on it.....
Overall:
Build quality is very middle of the road, ergonomics need working on, but for the price it does the trick.
Inner case:
The inner plastic case is snug and feels robust enough to withstand the odd drop (not as tough as O/box plastic tho..). It clips on and off easily enough, but not so easy as to make me concerned. All the holes are there and they are where they should be.
However, there is a serious - yet workable - design flaw with the "built-in" screen protector. It comes glued to the inner case, which is great, but in order to remove the protective plastic film on either side of it, you have to prise it off and then stick it back on once you've removed the film. Luckily the glue they use is extra crappy, so it's quite easy to un-stick. To re-glue the screen protector back on, I just used tiny amounts of superglue gel, applied with a pin head. Unfortunately tho, this means that the front face of the phone is not sealed and therefore not splash or dust proof.
Outer case:
The outer silicone is not of a good quality. It's very thin and floppy and I predict it would lose it's shape and possibly tear if it were pulled about too much. This is both unfortunate and ironic as it takes a lot of pulling and poking to get it to fit around the inner case. Once you've got it on properly, it's fine - it's just a bit of a mission to get it snug and flush. However, the biggest design flaw with the outer case, is that the headphone and usb port covers do not stay shut - or rather they open very easily. There is no "wedge" mechanism on the doors to ensure they hold in place. This is particular annoying as they flap open if your fingers brush past them when you are holding the phone. In order to rectify this, I have used a tiny bit of blu-tack (don't know what the US equivalent of it is, sorry) on the inside of the cover doors so they stay shut. One other thing... my particular model has what looks like a small cigarette burn on it, but I guess that's just my bad luck there!
Conclusion:
Obviously, I realise that this is not a O/box, or any other decent case brand for that matter, so I can't be too harsh on it, especially at the price I paid ($17.95/ £11.50). At the end of the day, it's an (almost fully) encapsulating case which will give my Senny more protection than most other options available, at least until someone makes a better alternative.
No, it doesn't look like the coolest case on the block, but that's not what I have my phone for, so I'm not too concerned about aesthetics. What matters to me is that it works.... and it does (almost lol!).
Hope this was useful. If anyone has had any differing experiences with this case, I'd be very interested to hear about them.
Cheers,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Should you get a case for the LG Nexus 4?
Advantages of having a nexus 4 case
-(obviously) Protection for your phone
-Can include a stand so you wont need to hold it all the time
-Extra grip
-Can make your phone unique
-Sturdy hardware buttons to prevent accidental pressing(Varies throughout designs)
-Prevents it from getting dirty
Advantages of not having a case
-Glitter Glass shows(Shows alot better than transparent cases)
-Easier to swipe from the edge of the screen (Cases pop up at screen edges)
-Logos are more noticeable
-Looks better
-The smooth texture(Unless you want grip instead)
Cases give you grip/protection/.(recommended just in case something happens)
If your careful with your phone and like the special design then you probably wont be needing one covering your nexus.So in the end, its just protection VS looks.Press thanks if you made a decision on whether or not you want to use a case!
I think you missed the fact where THE WHOLE PHONE IS MADE OF GLASS
Sent from my Nexus 4, the only phone approved by Patrick Star
Case vs No Case?
I would go with case. My phone took a dive off my car after I set it there for literally 3 seconds (vehicle was not in motion at all). It made one small crack on the right hand side. Not a big deal right? Wrong. The digitizer failed on about 25% of the surface area right in the middle of the screen. In plain english that means no touch response on the screen, originating from the crack and extending the full width of the screen. This makes it difficult to text as it knocks out the T key in portrait keyboards and the message send button. In landscape it's also difficult. While a cracked screen may not seem like a big deal, it does suck when you have to drop ~$80 for a new digitizer/LCD.
The phone looks beautiful without the case, but it's not enough to justify the risk.
I've done both ways. Mine is currently naked... But it makes me a little nervous. Just can't find a case that I'm really happy with.
Sent from my Nexus 4 using xda app-developers app
h0bnail said:
I've done both ways. Mine is currently naked... But it makes me a little nervous. Just can't find a case that I'm really happy with.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I go naked at home and some places but in public I use this case
http://www.goballisticcase.com/coll...lg-nexus-4-ballistic-shell-gel-sg-series-case
Nexus 4 CyanogenMod 10.1.0
It's a no brainer!
OMG. This is all so dreary.
Look at your last phone. If its a mess and you're a clumsy git... get a case. If your old phone shows few signs of use then forgo the case.
Simples.
I cracked the back of my phone the first week I got it. A pallet jack just bumped my leg a cracked it by the speaker. This phones as fragile as the soft spot on a newborns head.
Sent from my Nexus 4 using XDA Premium HD app
I always have front and back protectors for the glass but the only times I use a thick sturdy case is when I'm at the gym or know there is a risk of breaking for example when I went hiking
Sent from my Nexus 4 using xda app-developers app
Some time ago I got one of these cases from eBay: http://www.ebay.com/itm/BLACK-CLEAR...G-GOOGLE-NEXUS-4-E960-ACCESSORY-/350692488954
I've been really happy with it. It's decently slim, seems like it provides pretty good protection, and with the translucent back, you can still see the original back of the phone (or dbrand skin in my case). It's very inexpensive, and the only downside I've found is that it makes the power button a bit stiff. Hasn't at all been a deal killer for me, though.
I use the OEM bumper case. Just yesterday I dropped my phone from waist height (about 3 feet) onto a tile floor and except for a few faint marks on the silver trim along the top of the bumper (that side hit the tile head on) no issues. Everyone who saw it was amazed I wasn't left with a cracked screen.
Sent from my Nexus 4 using xda app-developers app
Guys I think we should thank davanator22 for this he has brought up a very good discussion.
Did anyone test this case, it looks nice. Just like spigen cases.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.evocel.com/categories/motorola/moto-x-2014.html
It looks like a spitting image of a Spigen case. It does look nice just wonder how much bulk it adds, I know I sound like a broken record but I do not like cases that add too much bulk.
I have a Spigen case for my Nexus 5, and it is very nice but adds a lot of bulk.
Raistlin1 said:
It looks like a spitting image of a Spigen case. It does look nice just wonder how much bulk it adds, I know I sound like a broken record but I do not like cases that add too much bulk.
I have a Spigen case for my Nexus 5, and it is very nice but adds a lot of bulk.
Click to expand...
Click to collapse
yea i agree with this i had a spigen neohybrid for nexus 5 made it thick. and since its not rounded like the case in the back you lose the functionality of the rounded back where you can tip the phone one way or another for the display when its on its back. but i like it too.
Can any one confirm if this case has a flat back?
Hernandezsrt said:
Can any one confirm if this case has a flat back?
Click to expand...
Click to collapse
one of the reviews on amazon claimed it did indeed have a flat back, thus rendering the "rock to activate active display" feature unusable
Pictures anyone?
The case is freaking awesome. By far the best case I've ever bought for any phone. I would post pics but damn Tapatalk won't let me.
https://plus.google.com/100003611763845866613/posts/39F76S9oSXo
Update:
The case kept hitting/pressing on the volume rocker and power button which lead to constant bug reports being generated. Sucks cuz it was a great case. It took me a while to figure out wtf was happening lol
Sent from my XT1095 using Tapatalk
in
I bought one, we will see how she goes. Looks badass though.
I also picked one up on amazon yesterday. Will post some pics once it arrives.
Got the case
I got the case in blue. The price is right for sure. I actually love the case because it makes it angled and square. The buttons on the side feel awesome to click now too. The cons are that after two days of having it in my pocket the outside blue plastic corners are picking up the black from my pockets. That's the only issue really, my headphones and charger fit perfectly on it and it feels snug, there is a slight bend in the rubber at the top but NBD. Also, the plastic outside is mat, not shiny though the pictures would have you believe otherwise. Let me know if anyone else wants detail or pics.
how thick does it make the phone?
anyone try the BRILA cases also?
I am getting my replacement today... I will post some pix
eh, mine comes tomorrow lol impatient
size
About 1.5cm, still fits in my pocket, all good. Gonna pick up a darker colour one today because the blue edges are turning dark.
It does some damage on the leather back
Had the same issue, not using it for the moment will see if it goes away with time
djisia87 said:
It does some damage on the leather back
Click to expand...
Click to collapse
I experienced the same issue, had to send it back for a refund. Other than that I was really impressed by the case as a whole.
bhayes444 said:
I experienced the same issue, had to send it back for a refund. Other than that I was really impressed by the case as a whole.
Click to expand...
Click to collapse
I like the case too but leather... I wish some well known brand release something to US!!!
This company is legit. I got a replaced back for the color because it got messed up. They were super cool about it.
"I went ahead and included the Shadow Blue case for you, thinking that this color might wear the best. We hope that our effort to assist you shows that we care about you and if you can send us a quick note when you receive the package, that will be much appreciated. Thank you very much, Matt, and please have a wonderful evening!"
These guys have my respect.
I've noticed that there are a lot of threads for rugged cases, slim cases, vinyl skins and for people who want to use the phone naked (with Nexus Protect, hopefully ).
But how about covering the phone in a clear, transparent skin to protect the soft alluminium against scratches, while preserving the awesome look and design of the Nexus 6p?
I've found a handful of such skins:
http://www.skinomi.com/sk22137-huawei-nexus-6p-skin-protector.html
http://www.skinomi.com/sk22137-matte-nexus-6p-phone-skin-protector.html
http://www.iqshield.com/iq22137-huawei-nexus-6p-skin-protector.html
http://phantomskinz.com/google-nexus-6p/
http://www.xtremeguard.com/Huawei-Nexus-6P-Screen-Protectors-p/huanex6pxgrds.htm
http://www.armorsuit.com/huawei-nexus-6p-full-body-skin-protector.html
http://www.bestskinsever.com/google-nexus-6p-skins
Please share your experience with products like these (even with previous phones), or tell us if you order one!
A few samples from a couple different brands
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've got the first Skinomi you listed installed on my aluminum angler while I'm waiting for a dbrand skin to arrive. Although I've used the Skinomi screen protector before, this is my first time using the full body skin. In short, I love it. I typically carry my phone in my front pocket and so far there's been no peeling, scratches, etc... It adds a nice tackiness to the grip. I doubt it provides any drop protection though. Visually, I can't tell there's anything on the phone.
Bought xtremeguard to protect mine while i waited for my vinyl skin. The screen guard had huge cut outs for the speaker and the proximity sensors were covered. That leaves a lot of glass exposed and a black screen on calls.
The back was also poorly cut in terms of fit and finish. There's no skin provided for the visor, and the top edge of aluminum around the visor was completely omitted.
I bought that for $2 back when there was a sale code, but it was definitely not something I would keep on the long term. That being said, the visibility through the skin was quite good after you let the skin settle in about 2 days after installation.
Sent from my Nexus 6P using Tapatalk
adrman said:
I've got the first Skinomi you listed installed on my aluminum angler while I'm waiting for a dbrand skin to arrive. Although I've used the Skinomi screen protector before, this is my first time using the full body skin. In short, I love it. I typically carry my phone in my front pocket and so far there's been no peeling, scratches, etc... It adds a nice tackiness to the grip. I doubt it provides any drop protection though. Visually, I can't tell there's anything on the phone.
Click to expand...
Click to collapse
Could I trouble you for a pic of the skin on alluminum? All i see is the graphite ones, would be nice to see how the alluminum looks with one of these skins. Thanks!
hudsoncouto said:
Could I trouble you for a pic of the skin on alluminum? All i see is the graphite ones, would be nice to see how the alluminum looks with one of these skins. Thanks!
Click to expand...
Click to collapse
Here you go. I could have aligned the back piece a bit better. It's a little low. I figured I'd just leave it though since I'm expecting a dbrand. Also, there is a skin over the visor as well.
Those pics look pretty darn good actually. I wouldn't mind a clear visor vinyl, but I'm rocking a matte black already.
Sent from my Nexus 6P using Tapatalk
rice923 said:
Those pics look pretty darn good actually. I wouldn't mind a clear visor vinyl, but I'm rocking a matte black already.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Yeah, about the only thing they missed was a piece directly above the visor. I tried putting it in the Google Adopted case as well. It barely fit, but I hated the look, so skin only.
Just ordered a Bestskinever full body skin. We'll see if its cut out better than the other ones.
All these other brands seem to share more or less the same cuts, ommiting the strip above the visor, and not really covering "edge-to-edge". Waiting for some company to solve these issues. I'm mostly excited about Slickwrap's Naked series. It had perfect coverage on the HTC one M8