Related
Hi,
New to the forum, I found it while looking for an upgrade from WM5 to WM6 for my 2125. A fantastic source of information! I upgraded to Phil's Windows Mobile 6 for Tornado BETA, and everything went smooth as silk... until I disconnected from ActiveSync. I have full Internet access through ActiveSync with my laptop, but as soon as I disconnect the Internet connection fails. The phone works fine, and it pops in and out of the Edge network just like normal. I read though the beta thread, but nothing sounds quite like what I'm experiencing. Other than Internet, the phone and all the other features work perfect!
Any suggestions, oh wise ones?
Thanks,
- Steve
* whew * finally figured it out... I needed to add back in all my Cingular network settings...
Here's the Cingular instructions for anyone else who is upgrading their phone and neglected to copy down all network settings beforehand...
https://cingular.atgnow.com/cng/tutorials/KB56473.html
Thanks!
- Steve
Hi all,
I've got a Vodafone (UK) v1240 (HTC Tornado Noble variant) running ericjm WM6 For Tornado - HTC Edition ROM and GSM.02.61.01 / SPL.2.00.0014.
Every day or two, the 'G' symbol disappears from the bar at the top of the Home screen and doesn't return. GPRS is unavailable until I use the connection manager to turn the radio off and back on again.
This is *really* annoying as I use push email on a daily basis and often find ActiveSync in 'waiting for network' mode, even though I'm in an area with a good signal.
I've tried the registry hack of setting GRPS to 'Always on' and renaming the 'SuspendResume' registry value - but that doesn't seem to help this issue.
I've seen a few other grumbles on this forum and around the www about this issue - but no firm solutions. Can anyone shed any light on this - or suggest a fix?
the GPRS issue is fixed with the latest radio ROM update, did you run phil's WM6GSMUpdate? If not, get it from my tutorial in my signature
Thanks for the response karhoe.
I did apply WM6GSMUpdate while following an install guide similar to yours for ericjm's WM6 For Tornado - HTC Edition ROM.
I'll try re-applying it, but I believe it is already in effect as my radio version states: 4.1.13.28_02.61.01
Any other ideas?
Try this
I have the same problem when i use andot's ROM. I have also upgraded the radio to 4.1.13.28_02.61.01, but still not solved.
Finally, after i change my ROM to NiTroGenious' WM6 English 5.2.1616.18120 ROM, and upgraded my SPL to 2.00.0014, the problem has been solved. I am not sure whether is the ROM or SPL solve the problem.
If you want to upgrade your SPL, please find the link under NiTroGenious's signatures.
One thing I have seen even in my own phone (running VJs ROM v3.2) that depending on what's being refreshed on my home screen, the "E" symbol will disappear. In that case, it's not that my GPRS connection has dropped, it's just that the top bar isn't refreshing to display the symbol. If I force a home screen refresh, lo and behold it's back again. Could that be what's happening with you?
Hey guys, i've seen a number of different threads which "kind of" talk about this issue. I'm hoping to make this the definitive one. I'm on hour 10 of working to try to get this running..
(My apologies in advance if there is already one out there that i haven't found. i have been really looking and i think i tried it all... im sure thats what everyone says )
Hardware: HTC 8925 a.k.a At&t Tilt a.k.a TyTN II
Software: Duttys Official WM6.1 Release
Radio: 1.64.06.04
Provider: At&t (US)
Problem: BlackBerry Connect's "Identity" Tab reads "PIN: Pending"
I should also mention that i called At&t to confirm (prior to all of this) that i have a BBConnect service plan, it is active, and there is nothing on their end that would indicate a failure of any sorts.
Attempted Fixes (These have ALL failed):
I've tried every combination of having active sync enabled and disabled during bbconnect install.
I hard reseted before every install. Soft reseted after issue still occurred even after bbconnect install rebooted.
All tests were performed with the the HKLM\System\Versions Aku set to .0.4.2 as per Dutty's wiki: (http://wiki.xda-developers.com/index.php?pagename=DuttySeriesKaiser)
I also tried various combinations such as .0.2.0 and .0.3.6 and .0.3.0
Even tired changing Device ID to HTC_P3450
Tried all of the following BBConnect software downloads:
4.0.0.84:
http://sems.org/content/download/bbc4/o2-terra-bbconnect_wm6_professional_bb_4.0.0.84.cab
4.0.0.90:
http://sems.org/content/download/bbc4/bbconnect_wm6_pro_4.0.0.90.cab
4.0.0.91:
http://sems.org/content/download/bbc4/bbconnect_wm6_professional_bb_4.0.0.91.cab
4.0.0.92:
http://sems.org/content/download/bbc4/bbconnect_wm6_professional_bb.4.0.0.92.cab
Tried installing this one both by copying cab file over to local device and through device web browser:
4.0.0.97:
http://www.america.htc.com/mobile/connect/8925/
I'm installing from and installing to the local device memory, not the storage card..
i think i covered it all... oh, i didnt try the one HEX edit solution, because i didnt think its applicable to dutty's rom..
can ANYONE please help?!
---------------UPDATE--------------------
Okok...so problem solved... i thought i read something similar to this solution somewhere.. but..well whatever... frustrations are over (the problem always seems to find a way to fix itself after you post help for it! )
Process:
1. Hard Reset (set up initial settings, connect to provider, its a total of two reboots iirc)
2. Change registry setting (HKLM\System\Versions Aku set to .0.4.2)
3. Soft Reset
4. Change Device ID to any value (Settings->System->About->Device ID)
5. Soft Reset
6. Install BBConnect 4.0.0.97 via device browser from http://www.america.htc.com/mobile/connect/8925/
7. Installation reboots system
8. Disable 3G connection, force to use EDGE via wireless connection manager
9. Device receives PIN, activates, etc..
10. Enable 3G connection
Notes:
1. So i dont know if items 2,3,4, and 5 were really required.. after preliminary testing, everything works fine with the 3g connection turned on after initial registration.
2. I noticed that the BBConnect Today icon kept showing an exclamation mark indicating its outgoing connection was being blocked. Also the status window kept showing that the connection was suspended by the user, when i never did anything.. so i tired disabling the 3G and sure enough.. problem solved..
Hope this saves someone out there the headache i've been going through.. oh well.. back to the girlfriend who i've been ignoring for the last 10 hours... (hopefully im not in that much trouble )
wooooooooooooooooooot, thx for the solution.
Man...thanks a lot for all the help...it worked like a charm...and i am using it here in dubai...uae where the black berry doestn support the kaiser offically
cheers bro
Great work man, great work for users who uses BBConect
3G still working?
Quick question for those who tried the (disabled 3G to Edge) and then re-enabled 3g.
Does your 3g still work? Have your tried to place calls in 3G mode? I am on my third Tilt, the prior two times I lost 3g after installing blackberry connect, and I want to see if anyone else has this problem, before a try a third time.
Note: On my previous two phones all worked well when I downgraded to GPRS (Edge) as described, but I never got back 3g (even after flashing and removing BBConnect)
elec.two said:
Hope this saves someone out there the headache i've been going through.. oh well.. back to the girlfriend who i've been ignoring for the last 10 hours... (hopefully im not in that much trouble )
Click to expand...
Click to collapse
I added this post to Dutt's WIKI and gave you due credit for your hard work.
Now if only someone can figure out how to force WM to do multiple APNs and BBConnect would be perfect!
Strange... All I had to do with my Tilt was set the AKU to .0.4.2 or .0.4.4 in the registry before installing the BB Connect software.
I've used the .92 & .97 installers from CAB files on my SD card just fine.
If you change the AKU version after the BB software is installed, it won't work right, as it will still drop the connection. You'll have to reinstall the software.
http://forum.xda-developers.com/showpost.php?p=1903958&postcount=5
Quick Question
So to those of you who have BB Connect running, is all well with your 3G? Thanks for your help, I want to hear a few success stories before a walk down this path again
so I followed the steps, and got everything installed and turned off. I'm trying to get an unlocked tilt on my blackberry account on t-mobile.
The problem is its installed, but the email options are greyed out. We don't use an exchange server (or if we do it is configured very wrong) as I have pop3 information on my t-mobile blackberry page. It says I register successfully on the network, but I still don't receive emails. What do I need to chnage?
edit: fixed - I had to get back online and say yes that I had a new pin.
THANKS!!
lcohen999 said:
Now if only someone can figure out how to force WM to do multiple APNs and BBConnect would be perfect!
Click to expand...
Click to collapse
that is the same problem I have left now, almost like hardware related.
does AT&T default one can do multiple APNs? as it is officaly support BBC.
I installed Blackberry Connect and I am using it with a Blackberry Enterprise Server.
But I see in order to have the BB icon, the GPRS is always attached. Should it work like this ? I know/knew that with Blackberry phones it attaches to GPRS only when incoming email is coming, and only with Microsoft Directpush technology it stays attached all the time.
If it works like this ( Always On ), is there a difference between BB Connect for WM, and Outlook with Microsoft Direct Push ?
Yours,
Alex
elec.two said:
4.0.0.97:
http://www.america.htc.com/mobile/connect/8925/
Click to expand...
Click to collapse
This link doesn't seem to work, it's actually supposed to be:
http://www.america.htc.com/mobile/connect/8925/index.html
The problem is, when you click "install now" it still can't find the cab. The 4.0.0.97 cab is now mirrored here:
http://sems.org/content/download/bbc4/bbconnect_wm6_professional_bb_al_4.0.0.97.cab
desktop manager software
Do you have a link for desktop manager?
I have the version 4.x.17 and cannot connect with the bb on the pda.
I don't know which is the latest or most compatible version for desktop mgr having in consideration what you have in the pda. please, give me some light...
Thanks from a Touch DUAL user....
Thanks Elec.Two
Just added this to the Touch Dual Forum (Nike) as it works a dream for us too!
http://forum.xda-developers.com/showthread.php?t=390284
Has anybody an idea how this will work on a Pharos / HTC P3470? I just tried it described in this taks, but without success.
I had 2 dots and an x
I updated to Dutty's ROM today, and had problems with BBC.
So I searched, found this page and did exacty as told. No luck. Tried again. No luck.
So I went to Start/Settings/Connections/Connections and then clicked on 'Manage existing connections' and changed the settings (default on Dutty's ROM). [To do that click 'Edit' and change the 'Access point name' from isp.cingular to wap.cingular. Click next and change the 'User name' from ISP.CINGULARGPRS.COM to WAP.CINGULARGPRS.COM]
This worked for me. This info is for noobs, of which I am one!
I have just updated my TyTN II to WM6.1 and bbconnect (version 4.0.97) stopped working. Basically it had PIN marked as pending and was reporting no connection.
I have executed only step 2 (change hklm) and 3 (soft reset) from elec.two procedure and it resolved my issue - bbconnect works now. I have not reinstalled the bbconnect.
So I went to Start/Settings/Connections/Connections and then clicked on 'Manage existing connections' and changed the settings (default on Dutty's ROM). [To do that click 'Edit' and change the 'Access point name' from isp.cingular to wap.cingular. Click next and change the 'User name' from ISP.CINGULARGPRS.COM to WAP.CINGULARGPRS.COM
Click to expand...
Click to collapse
Well, I have to thank you on this! I could not get BB Connect to work for the life of me, and your fix finally go t it working!!!
Thanks!
.... and now for the Diamond - same old problem....
Have tried all the known fixes - I think - anyone had any success with bbconnect on the new diamond? Sigh.....
Hello.
I have an O2 Xda Exec with Ranju's v7.7 WM6.1
Everything works perfect except the wifi.
Why can't I make it work?
I open the connection manager, push the wifi icon and nothing happens! It stays off!
Can you give me some advice?
Thanks in advance!
noone85 said:
Hello.
I have an O2 Xda Exec with Ranju's v7.7 WM6.1
Everything works perfect except the wifi.
Why can't I make it work?
I open the connection manager, push the wifi icon and nothing happens! It stays off!
Can you give me some advice?
Thanks in advance!
Click to expand...
Click to collapse
I haven´t any problem with wifi on Ranju v7.7.
reinstall the ROM.
Actually that happened with every wm6 roms I have put in the past.
For example ranju's v7,6.
Do you think that this happens because I have the sdhc driver enabled?
Hello again.
I did some research on my Universal and found out that my device doesn't recognise the wifi module.
I ran the IPer, clicked on adapter info and there is nothing there! (Maybe that's because I can't switch the wifi on. I don't know)
Then, I ran wififofum and there is nothing as a device..
Can anyone please tell me what to do? Please, I'm desperate!!!!!!!
Is there any chance that you are using the Battery Status plug-in? I've experienced exactly the same problem (can't switch WiFi on) with both versions 1.04 & 1.05. If yes, just try to uninstall it.
Unfortunately I'm not using this plugin..
The only today plugins I'm using is the HTC Home VGA, Resco today and SMB GPRS Monitor.
I also do not use the overclocking application embedded with the ROM and I have the watchdog disabled.
Any other clues??? Please...
i have the exact same problem, with every wm6 i installed, now i tried the 6.1 and thats no good, my pda is useless without wifi
any ideas are welcome, i dont want to go back to a wm5 rom
anyone found the cause of this behavior?
I can sometimes switch WLAN on, after the "switching on" time, I turn my Universal off, then on, and WLAN works.
I have the same problem. It started with Tomal's 8.2 ROM and I think it could be when I started using SDHC. Another thing happens to me is that even if, in Stenigs-->System, the Performance is set to 624Mhz, when I test it with CPUID.exe the processor is working at 520Mhz.
Has anyone tryed to downgrade to WM5?
I've read that somthing may be erased in the UNI EEPROM that is not reinstalled with ROMs. But I've "no idea" about it.
a lot of ROMs has affect by WiFi issue when You protect with WPA PSK. Please search for thread : WiFi WPA-PSK Workaround and BubbleFix Service (CAB and OEM) - STABLE ( 1 2 3 ... Last Page) and install the cab. WiFi will run perfectly
Thanks for your help but my problem is that the wlan doesn't turn the WIRELESS LAN on, not the ecryption used. Without wifi, the Universal is just a very BIG cell.
I've even tried this WIFIService.cab but it hasn't solved the problem.
does not seem to work for Tomal's latest ROM
Hey Folks,
i recently Flashed my Kaiser with Brand New 6.1 WWE
the http://forum.xda-developers.com/showthread.php?t=439408&page=23
and i'm ok so far. Speed is not TOO fast but everything is working so far except of one issue. Since i'm not using any 3g connection (no mobile internet flat) i used to switch the phone to GSM Mode in order to increase battery life. Unfortunately i can not change this Mode after flashing the new rom. There ain't even a menu item called "band" in which the band can be selected. Anyone got an idea how to fix that problem? Maybe per Reg Hack?
Let me know Guys!
Thanks in advance
nik
You can install Advanced Config Tool v3.3 (first You need NetCF 3.5 installed), run it and then go to Phone, drop the list down and change "Show Band page" to "Yes".
Hey, thanks..but this didn't help
hahahah just kidding! worked well!
Don't worry, you only had to install a diffenrent Comm mananger in order to switch the phone to GSM mode, the ROM i have right now has the same issue, and that works for me. Look into cab's collections in the forum, almost all commanager posted had this functionality.
Good Luck !
He..he..glad to hear that, about comm manager, yeah absolutely You can ad 3G shortcut at the existing comm manager, just, again, open Advanced config, go to comm manager (if it's exist), just select 3G check box.