Related
Hello friends.
This is intended to be a thread providing up-to-date versions of ZTE ROMs, mainly for the very unsupported (so far) ZTE V71A and ZTE V11A, but if you have other requests for ZTE roms, please ask and I'll see if I can provide.
--- VDF_IT_V11AV2.0.0B02.zip (466.13 MB) http://www.multiupload.nl/E709JNIJ2H
--- FWUpgrade_Pad_CDMA_V55.zip (215.24 KB) http://www.multiupload.nl/NP6EWS6K3B
--- SPT_AM_V55V1.3.0B09.zip (193.05 MB) http://www.multiupload.nl/YTMKD922CU - NEW v55 ROM
--------------------------------------
The above files are most probably all down, and I can no longer locate new versions for them.
I can, however quote:
dclou said:
Hello All:
The phone company in Taiwan(TWN GSM) has just released the offical 4.0.4 rom zte V71A
(Taiwan mobile mypad p4 is the OEM of ZTE V71A)
http://service.taiwanmobile.com/csonline/cellphone/download.html
Just Connect to the above hyperlink and press "P4 Android 4.04 升級檔 "
Then you can download it and upgrade to 4.0.4.
Please help to update this ROM to the first page of this thread...^^
Click to expand...
Click to collapse
I'm sorry friends. I've lost access to the ZTE servers from where I procured new roms for devices.
Unless I find a different source, I can't provide any updates.
Until further notice this thread may be considered dead.
Thanks man, soo is this older or newer? http://kepfeltoltes.hu/120218/tmp_-2133757290_www.kepfeltoltes.hu_.png
1.2.0B09 released in february 2012 vs 1.0S released in july 2011
Leave me your e-mail adress by pm if you want the file, but be advised that we still don't have a flashing utility to install it with, me and mobilx are still trying to figure out how we can get this software on our devices.
sangemaru said:
1.2.0B09 released in february 2012 vs 1.0S released in july 2011
Leave me your e-mail adress by pm if you want the file, but be advised that we still don't have a flashing utility to install it with, me and mobilx are still trying to figure out how we can get this software on our devices.
Click to expand...
Click to collapse
That would be good. did you get my pm?
Zte score roms?
Sent from my X500 using xda premium
Okay, so here is a pdf for the huaweii media pad 7, of the flashing process and the unlmt.cfg needed is 0byte also , it is supposed to be the same process, dont use the files from here, its not for v71a or v11a!
http://www.huaweidevice.com/tcpsdownload/downLoadCenter?category=&flay=software&downloadID=NDM5NzQ=
brd912, couldn't you have just said X500 in the first place? I'll look, if I find anything I'll let you know.
zsolti, so far I've had no success with using the huawei procedure to flash our tabs, and mobilx hasn't been online today so I haven't got a clue from him about this.
The bad news is, as confirmed earlier by mobilx, the builds are IDENTICAL to what we currently have on our devices. Not encouraging at all (Verified by comparing build.prop). And we don't even know how to flash them yet...
I'm attempting to obtain a carrier unlocked nandroid backup right now, to see if it's locked at a component firmware level or at software level. Maybe we'll see some good news on that front.
Hello there,
This guide in english explains a lot. So this unlmt.cfg file actually serves as a trigger to automatik or manual update.
That means
if it is present update will start on PWR off PWR on
if it is NOT present than you need to go to the FTM mode VOL+ & PWR and update process will start
dload folder must be on ext-sd card.
Again leaked FWs for V11a are the same as ones on our devices
Sangemaru can confirm if his internal FW name on 7 inch matches with the leaked ones.
Go to yours build.prop file and check ro.build.sw_internal_version=VDF_RS_V11AV1.0.0B03 example of mine device
VDF - network - vodafone
RS - country - serbia
V11A - model - 10 inch
V1.0.0 FW version - very first
B03 - localisation ( APNs, keyboards etc) Serbian network APNs and Cyrillic keyboard
Yea, I read it.
At least for my tablet, it didn't apply. Update would not trigger, either on reboot or ftm mode, with neither UPDATA.zip or update.zip names, with the file or not, with fresh sd card format or not, development mode or not, etc.
I'm assuming it worked on your V11A, so somebody should attempt it on their own V71A's if possible. I may have messed something up, or simply have an unsupported sd card.
The one in first post for V71a is :
ro.build.zte_build_number=SmartTab7-MSM8260-V02d-Dec022011-Vodafone-ES
ro.build.software_version=SmartTab7-MSM8260-V02d-Dec022011-Vodafone-ES
ro.build.sw_internal_version=VDF_ES_V71AV1.2.0B09
ro.com.google.clientidbase.ms=android-hms-vf-{country}
ro.com.google.clientidbase.am=android-vf-{country}
ro.build.date=Sat Dec 3 02:09:34 CST 2011
Mine is:
ro.build.zte_build_number=SmartTab7-MSM8260-V02d-Dec022011-Vodafone-HU
ro.build.software_version=SmartTab7-MSM8260-V02d-Dec022011-Vodafone-HU
ro.build.sw_internal_version=VDF_HU_V71AV1.2.0B09
ro.com.google.clientidbase.ms=android-hms-vf-{country}
ro.com.google.clientidbase.am=android-zte
ro.build.date=Sat Dec 3 03:44:43 CST 2011
.
Anyone know what will happen if we flash a firmware from another carrier, like in my case? Because the network id isnt the same for hungary it is 21670, for spain its different...
I'm assuming one thing will happen: nothing.
hei, did any of you has dialer app, it seems vodafone had removed this one
p.s. am on july rom
if there is one can some one post it
tanks
Honeycomb, friend. Honeycomb has telephony support removed. If you want phone service look into a VoIP service.
Hi all !!!!!
I'm Italian .......
My device specs :
M8660A-AABQNLYM-3.1.32T 1 Jul 23 2011 22:00:00
Kernel version :
2.6.35.11-perf.
[email protected]#2
Build Number :
SmartTab10-MSM8260-V02d-Dec022011-Vodafone-IT
huawei media tab
sangemaru said:
Honeycomb, friend. Honeycomb has telephony support removed. If you want phone service look into a VoIP service.
Click to expand...
Click to collapse
did notice that huawei media pad has a dialer app, however did not succed to start it.
I'm saying that in greate proportion the two tablets are just the same.
no luck
zsolti256 said:
The one in first post for V71a is :
ro.build.zte_build_number=SmartTab7-MSM8260-V02d-Dec022011-Vodafone-ES
ro.build.software_version=SmartTab7-MSM8260-V02d-Dec022011-Vodafone-ES
ro.build.sw_internal_version=VDF_ES_V71AV1.2.0B09
ro.com.google.clientidbase.ms=android-hms-vf-{country}
ro.com.google.clientidbase.am=android-vf-{country}
ro.build.date=Sat Dec 3 02:09:34 CST 2011
Mine is:
ro.build.zte_build_number=SmartTab7-MSM8260-V02d-Dec022011-Vodafone-HU
ro.build.software_version=SmartTab7-MSM8260-V02d-Dec022011-Vodafone-HU
ro.build.sw_internal_version=VDF_HU_V71AV1.2.0B09
ro.com.google.clientidbase.ms=android-hms-vf-{country}
ro.com.google.clientidbase.am=android-zte
ro.build.date=Sat Dec 3 03:44:43 CST 2011
.
Anyone know what will happen if we flash a firmware from another carrier, like in my case? Because the network id isnt the same for hungary it is 21670, for spain its different...
Click to expand...
Click to collapse
Hi majaelix,
Tried all proceudres described in this post with no luck updating firmware, I have a Vodafone Spain V71a with 1.0 software version.
Tired to create several folders in sd-ext and puting inside the update.zip and the .cfg file with no success
Tried to sign the zip with Signapk utility but when I try to update it from Recovery, it says: "signature check failed", I think one of the files nneded to sign a zip file is related to the recovery, so I don't know how to generate it.
Also tried to root it with fastboot boot superboot.img but my fastboot can't detect the device form pc, I'vhe checked if drivers are installed in device administration and all seems to be ok.
Did you make any advance on this issue, I'm looking forward.
caveman_78 said:
Hi majaelix,
Tried all proceudres described in this post with no luck updating firmware, I have a Vodafone Spain V71a with 1.0 software version.
Tired to create several folders in sd-ext and puting inside the update.zip and the .cfg file with no success
Tried to sign the zip with Signapk utility but when I try to update it from Recovery, it says: "signature check failed", I think one of the files nneded to sign a zip file is related to the recovery, so I don't know how to generate it.
Also tried to root it with fastboot boot superboot.img but my fastboot can't detect the device form pc, I'vhe checked if drivers are installed in device administration and all seems to be ok.
Did you make any advance on this issue, I'm looking forward.
Click to expand...
Click to collapse
No, but Please standby, a fellow Hungarian 10" user is probably going to make some kind of update we have obtained a build that is even newer, it is the following:
SmartTab7-MSM8260-V03a-Jan182012-Vodafone-HU
good news
zsolti256 said:
No, but Please standby, a fellow Hungarian 10" user is probably going to make some kind of update we have obtained a build that is even newer, it is the following:
SmartTab7-MSM8260-V03a-Jan182012-Vodafone-HU
Click to expand...
Click to collapse
Wow, those are good news. I can't wait for the update. maybe after, we can try to make some weird ICS port.
Please, keep us informed...
Thanks...
i have some problem
hello i have a V71A and i wanna take back the stock rom beacuse i formated system... and a CWM is buggy and usb mass storage is doesn't work and my pc don't see the tablet just CD-rom and not more "adb devices -list of devices atthaced (and nothing)" pls help (sorry for my english)
Uninstall and reinstall usb drivers. Your problem is a driver issue. And how exactly did you format the system?
Hey team!
My TF701T is not recognizing the zip file I downloaded from ASUS that will update the firmware.
My end goal is to install Lollipop on the tablet, but in order to play with Cyanogenmod 12, I need to get that firmware updated as Fastboot isnt playing nice otherwise.
I've tried using an insertable SD Card, and copying the file from ASUS to the internal storage and waiting for the auto-detect according to the SOP doc. Is there any way to get the ball rolling here?
please let me know if I can provide additional information.
Nevermind. I have a TF700T, and have been trying run an update for the TF701T =\
Hi,
I have nokia N8 and I recently managed to downgrade firmware from nokia belle refresh to scandinavian 11.05 firmware using instructions from this forum. Now I would like to refurbish it, but I want to use lowest possible firmware that is available for my product code. First I have one question, on mrcrab.net for nokia N8 RM-596 the lowest possible software is 11.12. I click on that link, and than I find my product code 059D6F4. And here I encounter my first problem there are 2 versions, V1 and V2. V1 has Variant ID: 4566463622, and V2 has Variant ID:4732303273. I don't know what is my variant ID, I searched on google and I can't find how to read Variant ID from my phone. So my first question is how to find Variant ID for my phone. Next I tried to write firmware from V2 version, although I am not sure if it is my Variant. So I downloaded all files from this page, put it in RM-596 folder in .../Phoenix/Products, renamed all files that contain RM-596 or RM596 in their name, so that all characters before these are deleted. But still there are some files with names without these chars so I left them as they are. Than I click Flashing, Firmware Update, than I click button with 3 dots [...]. In new window I get recognized my product code, in first column is 059D6F4, Description is empty, DP ver column shows 2.0. Since this is the only option I have, and only folder in Products folder is RM-596, I choose this and click OK. But here is problem and my second question, in Firmware Update window Product Code, and SW version text boxes are grayed, and Variant dropdown doesn't have any options. What am I suppose to do regarding this problem, thank in advance. Also I disable antivirus, run Phoenix as administrator, phoenix version is 2012.04.003.47798, the same one I used for downgrade from Belle refresh to Scandinavian FW. If anyone wants to help me via TeamViewer I would appreciate it.
Hi,
Thanks for using XDA kindly post here Android Q&A, Help & Troubleshooting
Good Luck!
I wanted to try installing a custom ROM, but i am not gonna do that withouth a stock ROM backup. However, i can't find the stock ROM for my device anywhere online and i have zero idea how to go around dumping mine. My serial code is: BLN-L21C432B130
Stock recovery would be nice too
Keep looking on Firmware Finder, or Google.
BTW, the full package should have the recovery image, this is, it is included on the UPDATE.APP file.
Panchoso4D said:
Keep looking on Firmware Finder, or Google.
BTW, the full package should have the recovery image, this is, it is included on the UPDATE.APP file.
Click to expand...
Click to collapse
I have been using firmware finder. No idea how to know what version is the right one for me tho. There was one, but it didn't download
Check this out: http://pro-teammt.ru/firmware-database/?firmware_model=BLN-L21C432B130&firmware_page=0
Is the official web page for the devs of Firmware Finder (on russian, just traduce it with your preferred traductor). The URL points for the firmware database, already put your version on the search field. You can download the firmware by clicking on the "update file" column URL (the 5th column).
For downloading the full package, you must choose the "FullOTA-MF" firmware.
Currently, there are 2 "FullOTA-MF" firmwares. Be sure to check if the changelog is available; if the changelog URL gives you a 404 error, then that firmware file will be unavailable.
Finally, you can flash the firmware through dload + 3 button method, if needed. There are guides on how to do this on the forums.
Cheers, and good luck :good:
Don't forget to check that the firmware version fits with your device's version.
Here http://download-c.huawei.com/download/downloadCenter?downloadId=94087&version=376224 you can download from official Honor European site the firmware for BLN-L21, Android 6.0, EMUI 4.1, C432B130
Panchoso4D said:
Check this out: http://pro-teammt.ru/firmware-database/?firmware_model=BLN-L21C432B130&firmware_page=0
Is the official web page for the devs of Firmware Finder (on russian, just traduce it with your preferred traductor). The URL points for the firmware database, already put your version on the search field. You can download the firmware by clicking on the "update file" column URL (the 5th column).
For downloading the full package, you must choose the "FullOTA-MF" firmware.
Currently, there are 2 "FullOTA-MF" firmwares. Be sure to check if the changelog is available; if the changelog URL gives you a 404 error, then that firmware file will be unavailable.
Finally, you can flash the firmware through dload + 3 button method, if needed. There are guides on how to do this on the forums.
Cheers, and good luck :good:
Don't forget to check that the firmware version fits with your device's version.
Click to expand...
Click to collapse
Could I please have a link to the guide?
Go to the repository thread in the guides section, you'll find everything you need
Model - ROG Phone 5 Ultimate (Possibly ROG Phone 5 as well see here )
2021/11/05
Version Name - WW-18.0840.2109.188
Release Date - 2021/11/05
OTA Download Link - Download
RAW Download Link - PENDING
Stock Boot Image - Download
Magisk Patched Boot Image - Download
Changelog
ROG Phone 5 (ZS673KS) software Image：WW-18.0840.2109.188 for WW/JP/EU/RU only*
This firmware is only for ROG Phone 5 WW/JP/EU version use and not applicable to ROG Phone 5S/5S Pro series models.
Note: Please be patience it's normal when downloading status bar stop a while with large update package.
For WW SKU Improved Item:
1. Optimize the charging experience function
Steps of Update:
1. Check software version of your device**
2. Download device software and Update SOP (From “Manual” Item)
3. Only apply to same SKU update, Example: WW->WW, CN->CN, TW->TW.
4. Software update cannot transfer the software SKU and downgrade the software version.
5. Wrong SKU may cause update failure, please update the same SKU version only.
**How to know the device model?
Path: Settings->About-> Model number
Example: ASUS PadFone2
**How to know the device software version?
Path: Settings->About-> software information->Build number
Example: CHT_PadFone2-user-10.4.17.15-UpdateLauncher
**System upgrade may cause part of data missing, please back up your important data before system upgrading.
Click to expand...
Click to collapse
Spoiler
2021/08/24
Version Name - WW-18.0840.2107.151
Release Date - 2021/08/24
OTA Download Link - Download
RAW Download Link - Download
Stock Boot Image - Download
Magisk Patched Boot Image - Download
Changelog
ROG Phone 5 (ZS673KS) software Image：WW-18.0840.2107.151 for WW/JP/EU only*
Note: Please be patience it's normal when downloading status bar stop a while with large update package.
For WW SKU Improved Item:
1.Updated Android security patch to 2021-07
2.Fixed issue with sending MMS messages on Optus Australia
3.Fixed an issue where some videos played through apps would get stuck and without response.
4.Fixed issue where AirTriggers would become insensitive after opening Taobao APP
For JP SKU Improved Item:
1.Updated Android security patch to 2021-07
2.Fixed an issue where some videos played through apps would get stuck and without response.
3.Fixed issue where AirTriggers would become insensitive after opening Taobao APP
Steps of Update:
1. Check software version of your device**
2. Download device software and Update SOP (From “Manual” Item)
3. Only apply to same SKU update, Example: WW->WW, CN->CN, TW->TW.
4. Software update cannot transfer the software SKU and downgrade the software version.
5. Wrong SKU may cause update failure, please update the same SKU version only.
**How to know the device model?
Path: Settings->About-> Model number
Example: ASUS PadFone2
**How to know the device software version?
Path: Settings->About-> software information->Build number
Example: CHT_PadFone2-user-10.4.17.15-UpdateLauncher
**System upgrade may cause part of data missing, please back up your important data before system upgrading.
Click to expand...
Click to collapse
*********************************************************************************************************************
2021/07/22
Version Name - WW18.0840.2106.86
Release Date - 2021/07/22
OTA Download Link - Download
RAW Download Link - Waiting
Stock Boot Image - Download
Magisk Patched Boot Image - Download
Changelog
ROG Phone 5 (ZS673KS) software Image：WW-18.0840.2106.86 for WW/JP/EU only*
Note: Please be patience it's normal when downloading status bar stop a while with large update package.
Note: Please be patience it's normal when downloading status bar stop a while with large update package.
Improved Item:
1. Updated Android security patch to 2021-06
2. Fixed an issue where the game would crash when using multiple windows to open the settings and change the system navigation
3. Fixed the problem of broken sound when using screen recording
4. Fixed the problem of low notification sound when using Bluetooth headsets in standby mode
5. Fixed an issue where blocking notifications in the game could not block Facebook messenger notifications
6. Fixed the problem of reduced call volume
7. Fixed the problem of using a microphone to record the voice of a team in the game, and the problem of not being able to record your own voice
8. Fixed the problem that the 5G network cannot be detected when connected to the GT-AX11000 router
9. Fixed a serious delay in the screen when entering the game with Geforce Now
10. Optimize touch experience
11. Fix sound effect for speaker playback.
Steps of Update:
1. Check software version of your device**
2. Download device software and Update SOP (From “Manual” Item)
3. Only apply to same SKU update, Example: WW->WW, CN->CN, TW->TW.
4. Software update cannot transfer the software SKU and downgrade the software version.
5. Wrong SKU may cause update failure, please update the same SKU version only.
**How to know the device model?
Path: Settings->About-> Model number
Example: ASUS PadFone2
**How to know the device software version?
Path: Settings->About-> software information->Build number
Example: CHT_PadFone2-user-10.4.17.15-UpdateLauncher
**System upgrade may cause part of data missing, please back up your important data before system upgrading.
Click to expand...
Click to collapse
I would assume it is all the same, since the firmware you posted is
https://dlcdnets.asus.com/pub/ASUS/...S_I005_1-ASUS-18.0840.2106.86-1.1.92-user.zip
and the firmware from https://forum.xda-developers.com/t/new-firmwair-version-ww18-0840-2106-86.4309457/ is also
https://dlcdnets.asus.com/pub/ASUS/...S_I005_1-ASUS-18.0840.2106.86-1.1.92-user.zip
twistedumbrella said:
I would assume it is all the same, since the firmware you posted is
https://dlcdnets.asus.com/pub/ASUS/...S_I005_1-ASUS-18.0840.2106.86-1.1.92-user.zip
and the firmware from https://forum.xda-developers.com/t/new-firmwair-version-ww18-0840-2106-86.4309457/ is also
https://dlcdnets.asus.com/pub/ASUS/...S_I005_1-ASUS-18.0840.2106.86-1.1.92-user.zip
Click to expand...
Click to collapse
It is the same, I'm looking for the RAW File.
JazonX said:
It is the same, I'm looking for the RAW File.
Click to expand...
Click to collapse
Wouldn't it also be the same then?
twistedumbrella said:
Wouldn't it also be the same then?
Click to expand...
Click to collapse
Not really, Once you install an OTA, The Active boot partition switches to the opposite one to boot the new firmware.
If you have Root + TWRP, I find this messy because then you have to manually patch the boot images, and it is usually after a few bootloops and softbricks. There is an option in Magisk, Install to inactive slot. That doesn't work always, at least during my ROG II and ROG III days.
Good thing about the RAW files, They do a clean install without wiping, and you can set it up easily afterwards with the usual magisk and patch steps without losing userdata. For a firmware upgrade I always prefer Raw files.
I actually found a RAW file from a usual source I used to get these, But surprisingly this version is not available in the ASUS site. Its about 3 digits below the current one.
WW_ZS673KS_18.0840.2106.83_M3.13.24.40-ASUS_1.1.92_Phone-user.raw | Download
Well... I can at least take some of your worries... OTAs won't be a thing after you unlocked your bootloader. You need to manually install them via magisk again. So there is no chance these automatic updates will break your phone.
Furthermore you don't have to worry about root + TWRP as well because there is no twrp for this phone and I doubt there will be one in the next time.
But applying updates and keeping root access without loosing your user data should be no problem. Magisk has special options for this and many people here update that way without bootloops and soft bricks.
JazonX said:
Not really, Once you install an OTA, The Active boot partition switches to the opposite one to boot the new firmware.
If you have Root + TWRP, I find this messy because then you have to manually patch the boot images, and it is usually after a few bootloops and softbricks. There is an option in Magisk, Install to inactive slot. That doesn't work always, at least during my ROG II and ROG III days.
Good thing about the RAW files, They do a clean install without wiping, and you can set it up easily afterwards with the usual magisk and patch steps without losing userdata. For a firmware upgrade I always prefer Raw files.
I actually found a RAW file from a usual source I used to get these, But surprisingly this version is not available in the ASUS site. Its about 3 digits below the current one.
WW_ZS673KS_18.0840.2106.83_M3.13.24.40-ASUS_1.1.92_Phone-user.raw | Download
Click to expand...
Click to collapse
I think you completely misunderstood my comment. I was saying that if the firmware for both models is the same, it is likely the raw files for both are the same (but still separate from the firmware).
In addition to what was already pointed out above, you have things backwards. The RAW firmware is intended to be a low-level rebuild. The regular firmware is not an incremental (which I assume is what you were thinking) and comes will a full firmware image every time.
Edit: The version from this thread now includes a separate flash_raw and flash_raw_and_wipe command.
twistedumbrella said:
I think you completely misunderstood my comment, but I am sure someone new will appreciate the explanation (with a few corrections).
In addition to what was already pointed out above, you have things backwards. The RAW firmware is intended to wipe your data, while the regular firmware upgrades are not. The regular firmware is not an incremental (which I assume is what you were thinking) and comes will a full firmware image every time.
Click to expand...
Click to collapse
RAW never wipes data. I've done it for almost 2 years in my ROG II.
That's how I usually update my firmware.
Unless something is changed in ROG 5 ... If yes, Then I'm wrong.
I'm yet to test all these anyway, Since unit is still on the way.
JazonX said:
RAW never wipes data. I've done it for almost 2 years in my ROG II.
That's how I usually update my firmware.
Unless something is changed in ROG 5 ... If yes, Then I'm wrong.
I'm yet to test all these anyway, Since unit is still on the way.
Click to expand...
Click to collapse
Then apparently it has changed. I didn't have a ROG II, but I have the ROG 5 in hand. I couldn't tell you what has changed, though.
You can, however, opt out of the erase. Not sure if you have to convert the raw to images first, though. I think that would be the method you used in previous phones. It was a flash_all script (or command, if you were on Windows).
Edit: The version from this thread now includes a separate flash_raw and flash_raw_and_wipe command.
twistedumbrella said:
Then apparently it has changed. I didn't have a ROG II, but I actually have my ROG 5. Couldn't tell you what else has changed.
You can, however, opt out of the erase. Not sure if you have to convert the raw to images first, though. I think that would be the method you used in previous phones. It was a flash_all script (or command, if you were on Windows).
Click to expand...
Click to collapse
Ohh .. In that case I was super wrong, and apologies over my misinformation.
Yeah, Actually ROG II Raw files had a Flash-all file which installs the full firmware, and reboots.
I even had a source (A Persian website) to get these when the OTA releases.
I was on windows, and usually after a RAW installation, the cache (Art or Dalvik, Whatever it is we have now) gets cleared and Phone becomes a little bit snappier than it was before.
Guess we gotta stick to ASUS OTA files from the support site then.
Thanks a lot ! : )
These updates come with a flash_raw script that looks more or less harmless. There is no visible wipe command included, but the phone did appear wiped after installing.
The flash_all, on the other hand, has a rather obvious section to opt in or out of an erase that opting out on Linux and Windows. I think the wipe isn't as much a wipe as it overwrites the partition.
I typically install my firmware with fastboot using a slightly modified version of the flash_all script and an unpacked payload. Somehow I broke the installer, which gives me a chance to test the raw again.
Edit: The version from this thread now includes a separate flash_raw and flash_raw_and_wipe command.
JazonX said:
The cache (Art or Dalvik, Whatever it is we have now) gets cleared and Phone becomes a little bit snappier than it was before
Click to expand...
Click to collapse
I thought that rumor died long ago. Usually unless things go wrong clearing the cache should not make your phone faster.
It's like closing all apps/recents after each usage in order to boost the performance.
Anubarak16 said:
I thought that rumor died long ago. Usually unless things go wrong clearing the cache should not make your phone faster.
It's like closing all apps/recents after each usage in order to boost the performance.
Click to expand...
Click to collapse
I think Art broke that. If I remember the explanation, the idea was to create something like the old odex layout that was less sloppy. The code that used to be cached is now broken out into a physical file alongside the application. It's also how apps like *that one everyone remembers for IAP* are able to modify code without breaking signatures.
Successfully rooted using the same commands from here and the root images in the OP.
JazonX said:
Successfully rooted using the same commands from here and the root images in the OP.
Click to expand...
Click to collapse
Any word on the raw firmware? What about the existing boot images?
twistedumbrella said:
Any word on the raw firmware? What about the existing boot images?
Click to expand...
Click to collapse
The RAW firmware I shared earlier - I didn't test it since it's a downgrade.
If the current firmware gets a RAW release, I will definitely test it.
Currently I patched only Boot Slot_A and booted to system using A. (using the same patched image I updated in OP)
Since there is no TWRP, I dont want to manually patch A and B both.
Magisk is stable, Didnt pass SafetyNet - So might need a module for that.
JazonX said:
The RAW firmware I shared earlier - I didn't test it since it's a downgrade.
If the current firmware gets a RAW release, I will definitely test it.
Currently I patched only Boot Slot_A and booted to system using A. (using the same patched image I updated in OP)
Since there is no TWRP, I dont want to manually patch A and B both.
Magisk is stable, Didnt pass SafetyNet - So might need a module for that.
Click to expand...
Click to collapse
You do need a module. It's posted in one of the root threads. I guess we won't know if you need different boot images until someone tests, but at least you seem to be comfortable patching your own.
twistedumbrella said:
You do need a module. It's posted in one of the root threads. I guess we won't know if you need different boot images until someone tests, but at least you seem to be comfortable patching your own.
Click to expand...
Click to collapse
Patching own images are always reliable...
SafetyNet Passed with this fix !
JazonX said:
Patching own images are always reliable...
SafetyNet Passed with this fix !
Click to expand...
Click to collapse
Glad you found it. Good luck.
I flashed the raw firmware. It was a downgrade and my device was already set up and in use, but it included the scripts and commands to install without a wipe (finally). Moving the latest firmware to the sdcard allowed me to update almost immediately after finishing the flash.
I would assume it works on the Ultimate, since everything else has been identical and the date on that package is the same as the software image.
New update !