Related
i've been using cm7 for a while now..but suddenly yesterday it is failed to boot..i've tried to use updates.zip but it got stuck at a quarter of the installation..right now it can't be charged at all, as i charged it will restart and restart before the moto signed..can somebody please help me!!!
ikr99 said:
i've been using cm7 for a while now..but suddenly yesterday it is failed to boot..i've tried to use updates.zip but it got stuck at a quarter of the installation..right now it can't be charged at all, as i charged it will restart and restart before the moto signed..can somebody please help me!!!
Click to expand...
Click to collapse
Try this first:
Plug the phone in for charging. Hold volume up and camera while powering on to get to the bootloader. After you get to be bootloader press and release the power button to shut the phone off. It should stay powered off while it continues charging. But watch it to make sure it doesn't try to autoboot after a while.
If not/alternatively:
Take off the back cover of the phone. Start charging and keep an eye on the screen. It will charge without booting for something like 10-15min. When it starts to boot, yank out the battery and then put it back. Repeat for 1-2 hours.
Or you can maybe try combining these: and use rubber bands to hold the volume up and camera buttons down so that when it auto-powers-on it will go to the bootloader and you can just press the power button if that happens.
I used to suffer this problem a lot. I ended up getting an external battery charger (you can find them for pretty cheap). Strongly recommended.
Mioze7Ae said:
Try this first:
Plug the phone in for charging. Hold volume up and camera while powering on to get to the bootloader. After you get to be bootloader press and release the power button to shut the phone off. It should stay powered off while it continues charging. But watch it to make sure it doesn't try to autoboot after a while.
If not/alternatively:
Take off the back cover of the phone. Start charging and keep an eye on the screen. It will charge without booting for something like 10-15min. When it starts to boot, yank out the battery and then put it back. Repeat for 1-2 hours.
Or you can maybe try combining these: and use rubber bands to hold the volume up and camera buttons down so that when it auto-powers-on it will go to the bootloader and you can just press the power button if that happens.
I used to suffer this problem a lot. I ended up getting an external battery charger (you can find them for pretty cheap). Strongly recommended.
Click to expand...
Click to collapse
it did help in charging the battery but the system won't started, it keeps on restarted after the starhub logo (singapore set)..
OK, so first try to get to open recovery (press and hold volume-up while booting from power off state). From openrecovery make a nandroid backup, factory reset, and try a reboot.
If you can't get into open recovery you can try stock recovery (I can't remember the process off the top of my head)
Do you have ext partition on your SD card?
The last resort is to flash back to stock using a sbf using RSS lite/sbf_flash.
Mioze7Ae said:
OK, so first try to get to open recovery (press and hold volume-up while booting from power off state). From openrecovery make a nandroid backup, factory reset, and try a reboot.
If you can't get into open recovery you can try stock recovery (I can't remember the process off the top of my head)
Do you have ext partition on your SD card?
The last resort is to flash back to stock using a sbf using RSS lite/sbf_flash.
Click to expand...
Click to collapse
it didn't work..i've read some articles about it this problem..all i need is update.zip that compatible with xt720 can anyone please help???
I don't think there are any update.zip that work -- the milestone xt720 recovery never had that vulnerability (unless you've flashed the xt720mod.sbf). And as far as I know all updates for XT720 have gone via Motorola's usb software updater program (not ota update.zip) so I don't think there are any correctly signed full system updates sitting around anywhere.
I think you're going to have to flash a stock sbf using RSD lite (windows) or sbf_flash (Linux, macos)
the device can't be detected by computer in it's current state so i can't flash it
Make sure you download moto usb drivers.
Hold down power button, volume button, camera button at the same time bootloader will come up.
Startup rsd lite plug into usb your phone should be recognize.
If not reconnect if this doest work reinstall rsd lite.
Sent from my XT720 using xda premium
sorry guy but it still can be helped do u have any other idea???
1.Can you get to bootloader.
2. Can you get to open recovery.
Answer yes or no on these questions.
Base on your answers I will come up with some ideas.
Sent from my XT720 using xda premium
mchlbenner said:
1.Can you get to bootloader.
2. Can you get to open recovery.
Answer yes or no on these questions.
Base on your answers I will come up with some ideas.
Sent from my XT720 using xda premium
Click to expand...
Click to collapse
i can only get to bootloader and the android recovery 2e that's it or else it will restart until all the power have drain
If your computer doesn't recognize your phone try a different computer.
Also try plugin and uplugin and plugging again.
Also try hardreset and remove sdcard.
Sent from my XT720 using xda premium
i've tried them all still not working, i got no idea any more how to solve this,but i did try to use update.zip in from this link
http://androidforums.com/motorola-d...la-droid-frg01b-update-1-2-a.html#post1296035
it loaded only half way.
That is for motorola droid not milestone xt720.
Did you try to install something to have this happen.
Sent from my XT720 using xda premium
before this happen im using cm7 but it cant move app to sd, so i tried to install the update using openrecovery it was stucked then i chose to restart it and it continue to restart until now.
What update did you install.
You must realize are bootloader is locked you have be careful what you install.
Sent from my XT720 using xda premium
i dont quiet sure about the update, all i want is to make all the apps movable, but i really dont know the bootloader is locked so how do fixed this?
I hate to be the one to tell you if you can't get into bootloader and be recognized by computer and sbf flash if you can't do this your phone maybe bricked.
Sent from my XT720 using xda premium
ok, what did u mean by bricked? sorry i cant understand the term
Broke
Sent from my XT720 using xda premium
Hey please experts help me with my galaxy 3 i just bought one i had it 1 day, battery was discharged and after i charged it i got bootloop I tried many roms and i always got : bootloop, boot screen with GT-I5800 or screen Kernel panic upload mode. I cant go into recovery mode i dont know hy it dont works (its vol+,vol -, home, power isnt it?) I cant root it i cant do anything. Anybody have some ideas what to do or its bricked? If its important i can still go into download mode and flash it using Odin thats all i can do with this phone. Pls heeeelp.
P.S.
Its not like that i dont red the forum i sited here many hours and still i didnt find solve of my problem. I guess i am too dummy ;/ I will be graceful sboody ?: (
Here comes help!
Welcome to the forum, btw
First thing you should do is hold on a little bit.
To solve your problem try to get to download mode (VOL-, HOME, POWER, then after phone turns on, release power) and flash Kyrillos' ROM (FROYO - v9.0) - fire up odin, tick one package, select tar and flash it. AFTER the flashing ends, you should boot up to recovery (CWM recovery for G3MOD kernel). Here, navigate through menu using VOL+, VOL- and navigate to "Wipe data/factory reset" option. Now press HOME button to confirm. Navigate again to Yes, press HOME again and wait till its done.
Now Navigate to "Reboot" or something like that - its the first option in there. Then press HOME again. You should see the phone rebooting and then displaying the bootanimation - it lasts for aprox. 10-20minutes, so don't panic!
If this wont solve your problem, give me more info
- New or used phone - THIS IS ABSOLUTELY IMPORTANT TO KNOW BECAUSE IF YOU HAD NEW, YOU HAD 2.1 FIRMWARE ON IT
- Did you wipe data/factory reset phone
- What else you tried?
- etc, etc...
There will be solution somewhere... I'm sure. But post the result after trying that.
PS: here on xda is a little THANKS button... Use it instead of "THANK YOU" posts. (Just in case you didn't know)
twinky444 said:
Welcome to the forum, btw
First thing you should do is hold on a little bit.
To solve your problem try to get to download mode (VOL-, HOME, POWER, then after phone turns on, release power) and flash Kyrillos' ROM (FROYO - v9.0) - fire up odin, tick one package, select tar and flash it. AFTER the flashing ends, you should boot up to recovery (CWM recovery for G3MOD kernel). Here, navigate through menu using VOL+, VOL- and navigate to "Wipe data/factory reset" option. Now press HOME button to confirm. Navigate again to Yes, press HOME again and wait till its done.
Now Navigate to "Reboot" or something like that - its the first option in there. Then press HOME again. You should see the phone rebooting and then displaying the bootanimation - it lasts for aprox. 10-20minutes, so don't panic!
If this wont solve your problem, give me more info
- New or used phone - THIS IS ABSOLUTELY IMPORTANT TO KNOW BECAUSE IF YOU HAD NEW, YOU HAD 2.1 FIRMWARE ON IT
- Did you wipe data/factory reset phone
- What else you tried?
- etc, etc...
There will be solution somewhere... I'm sure. But post the result after trying that.
PS: here on xda is a little THANKS button... Use it instead of "THANK YOU" posts. (Just in case you didn't know)
Click to expand...
Click to collapse
Thank u very much man phone was used but it had 2.1 stock firmware on it, i didnt wipe/ factory reset on phone, and i didnt't tied sthing else.
Now tell me after flashing Kyrillos' rom v9.0 Do I have flash kernel with CWM or its in Kyrillos already? How to enter CWM recovery mode ? Same as normal (VOL +, VOL-, HOME, then POWER) I did thank u cuz it sounds logical what u wrote thank u man and I am waiting for reply.
CWM is pre-installed on Kyrillos rom. To boot into CWM recover just turn the phone on, hold the power button until a menu comes up and in the menu it will say recover. Press recovery to go into recovery mode.
--------------------------------
Click thanks if I helped.
I did flashed kyrillo's v 9.0 and and after flashing phone just stay in boot screen and nothing happends. I cant do anything again. Do root is needed to flash ROM's cuz when my phone crashed it wasnt rooted and now i cant root it cuz computer only see it as Modem and composite device mode ;/ I dont know what to do.
KamelusPL said:
I did flashed kyrillo's v 9.0 and and after flashing phone just stay in boot screen and nothing happends. I cant do anything again. Do root is needed to flash ROM's cuz when my phone crashed it wasnt rooted and now i cant root it cuz computer only see it as Modem and capcitive mode ;/ I dont know what to do.
Click to expand...
Click to collapse
Turn your phone off by pulling the battery out. The put the battery back in but don't turn the phone on. Hold the volume up + volume down + home button + power button and as soon as the screen turns on, let go of the button. This will take you into CWM recovery. Then, in recovery, select wipe data/ factory reset, then wipe cache and then wipe the dalvik cache. These options are all in recovery and are easy to find. Then reboot the phone and it should work. Also you don't need to root your phone to flash a custom ROM.
--------------------------------
Click thanks if I helped.
MicroGeek said:
Turn your phone off by pulling the battery out. The put the battery back in but don't turn the phone on. Hold the volume up + volume down + home button + power button and as soon as the screen turns on, let go of the button. This will take you into CWM recovery. Then, in recovery, select wipe data/ factory reset, then wipe cache and then wipe the dalvik cache. These options are all in recovery and are easy to find. Then reboot the phone and it should work. Also you don't need to root your phone to flash a custom ROM.
--------------------------------
Click thanks if I helped.
Click to expand...
Click to collapse
The problem is that this recovery mode dont works .... :S Look I am serious
xxx.youtube.com/watch?v=lZ5ySu_wZKY
In url change xxx to www i cant post outside links
MicroGeek said:
CWM is pre-installed on Kyrillos rom. To boot into CWM recover just turn the phone on, hold the power button until a menu comes up and in the menu it will say recover. Press recovery to go into recovery mode.
--------------------------------
Click thanks if I helped.
Click to expand...
Click to collapse
You probably have confused Samsung galaxy 3 with Samsung galaxy S3 because this phone (Galaxy 3) Hasn't menu that you can boot to recovery/bootloader with. At least I dont know about such "menu" thing.
---------- Post added at 03:13 PM ---------- Previous post was at 03:01 PM ----------
----------------------------------------------------------------------- SOLUTION! ---------------------------------------------------------
@KamelusPL: You said that you cant boot after flashing Kyrillo's ROM v9.0. And you had Android 2.1 and you couldn't boot. That means you have been in hurry to get things really fast done and flashed FROYO ROM WITHOUT BOOTLOADERS OVER 2.1 THAT COMES WITH ITS OWN TYPE OF BOOTLOADER = bricked.
HOWEVER, there's a solution! yeah!
This is a bit risky, but if you want your phone working again, you must do that. I'm saying again, I take no responsibility over such things.
1. Put your phone into download mode. This must be working.
2. Download this file: http://hotfile.com/dl/132526357/46bd186/I5800XXJPS_OXX_Android_2.2.rar.html
3. Open odin, tick ONE PACKAGE, in the down right corner click ONE PACKAGE and select .tar file you downloaded. ITS WITH PROPER BOOTLOADERS - FROYO XXJPS. That must work.
4. Click start. NOW DO NOT TOUCH YOUR PC until its done!
5. Wait till its done and wait till your phone boots up.
6. If you will have still bootloop, then you must boot into recovery (YOU MUST WAIT... RECOVERY WONT SHOW IMMEDIATELY just like in download mode... wait man.), here navigate using the same keys I told you before, and select wipe data / factory reset, then select yes and wait till its done. Then, navigate to wipe cache partition, select yes and wait till its done. Then, select reboot system now and press HOME.
7. This should be working!
This menu! Recovery is the second last option and I have a galaxy 3...
Edit: also I would recommend doing what the Guy above said. To boot into download mode you hold volume down + home button and the power button. :thumbup:
--------------------------------
Click thanks if I helped.
MicroGeek said:
This menu! Recovery is the second last option and I have a galaxy 3...
Edit: also I would recommend doing what the Guy above said. To boot into download mode you hold volume down + home button and the power button. :thumbup:
--------------------------------
Click thanks if I helped.
Click to expand...
Click to collapse
Sorry, I mean when booting phone theres no menu like fastboot or something like that because he said he cant boot it anymore.
Sorry, Im now using cyanogenmod 7 so I didn't know that
So I'm sorry
Sent from my GT-I5800 using xda app-developers app
Its interesting when I flash android 2.1 I got bootloop and when I flash higher android or other mod, I tried all i got stuck on Samsung logo what it may be phone is still bricked i guess there is no help ;/
@twinky444
I tried ur advice i flashed that Froyo loader and still nothing( Lag on samsung logo) what should i do ? :X
Is there other way to start that recovery ;/ I am confussed and depressed ;<
KamelusPL said:
Its interesting when I flash android 2.1 I got bootloop and when I flash higher android or other mod, I tried all i got stuck on Samsung logo what it may be phone is still bricked i guess there is no help ;/
@twinky444
I tried ur advice i flashed that Froyo loader and still nothing( Lag on samsung logo) what should i do ? :X
Is there other way to start that recovery ;/ I am confussed and depressed ;<
Click to expand...
Click to collapse
Hold vol up+down and power and home button when the phone is off and let go of the power button once you see something on the screen.
Sent from my GT-I9003 using xda app-developers app
Wait, so when you bought your phone yesterday the battery was discharged? So you didn't check if it was working or not before you bought it? Maybe you were scammed into buying a broken phone
--------------------------------
Click thanks if I helped.
Any other way to enter the recovery? I'm afraid not.
Maybe this has somethig to do with flashing CUSTOM FROYO ROM over 2.1. Because Kyrillos' ROM's kernel converts filesystems to other ones than the stock RFS that is used by stock samsung roms. That means the phone after flashing stock rom directly after some custom froyo roms dont recognize the partitions in different filesystems. So you must wipe data and cache partition to get the phone to recognize theese partitions again.
After that, the phone will boot. BUT YOU MUST BOOT IT TO RECOVERY AND WIPE DATA SOMEHOW.
This is really wierd... If you can go to download mode, I'm sure this can still be fixed somehow, but the stock froyo rom should boot into recovery anyways...
Have you tried getting to recovery when you first saw the phone that its not booting? I mean at the beggining of this problem if you had still 2.1 when you got the phone? Because wiping data from recovery on 2.1 should have solved this problem I think...
EDIT: HERE IN XDA IS SOME FILE - zerofill.tar THAT IF YOU FLASH IT, YOU PROBABLY GET WIPED PARTITIONS, but not sure... TRY THAT - I think rkoby13 has posted this file somewhere... Try to PM him...
twinky444 said:
Any other way to enter the recovery? I'm afraid not.
Maybe this has somethig to do with flashing CUSTOM FROYO ROM over 2.1. Because Kyrillos' ROM's kernel converts filesystems to other ones than the stock RFS that is used by stock samsung roms. That means the phone after flashing stock rom directly after some custom froyo roms dont recognize the partitions in different filesystems. So you must wipe data and cache partition to get the phone to recognize theese partitions again.
After that, the phone will boot. BUT YOU MUST BOOT IT TO RECOVERY AND WIPE DATA SOMEHOW.
This is really wierd... If you can go to download mode, I'm sure this can still be fixed somehow, but the stock froyo rom should boot into recovery anyways...
Have you tried getting to recovery when you first saw the phone that its not booting? I mean at the beggining of this problem if you had still 2.1 when you got the phone? Because wiping data from recovery on 2.1 should have solved this problem I think...
EDIT: HERE IN XDA IS SOME FILE - zerofill.tar THAT IF YOU FLASH IT, YOU PROBABLY GET WIPED PARTITIONS, but not sure... TRY THAT - I think rkoby13 has posted this file somewhere... Try to PM him...
Click to expand...
Click to collapse
U have absolutly right that they to solve this is enter recovery mode but i think my problem is deeper i found something on my own. Look.
If your GSII has the folowing symptoms :
Bootloop
Stuck on GSII logo, but already removed the battery to try to fix it
Enters Download mode and Recovery mode
It means that you are soft bricked and is easy to solve.
But if your symptoms are the mentioned above, PLUS the symptoms below
Enters Download mode but does NOT enter recovery mode (usually means a NAND rw corruption)
Doesn't flash
Bad flash in odin (FAIL after flashing, or the flashing suddenly stops)
It looks like I must use all my brain power to solve that i guess i need to go deeper into android stuff cuz i wont give up. I even gave my phone to service but seems like that dude is lame and he is not so much expert like i need i send message to Kyrillos cuz i guess he knows all bout androids and all that stuff and thats the person who i need some1 very good must see my topic guess i will just read learn and w8 for help thank u all for advices
After watching your youtube video I am confused. You try to get in into recovery, but don't even wait 10 seconds before you remove the battery?
Before you start make sure the battery is not empty or even broken. Charge until it reports full.
Battery out for a while, remove charging cable. Then battery in, press Vol+ and Vol-, add Home, then Power, as soon as something appears onscreen let go all three. Then WAIT. What happens?
If it stays on the GT I5800 screen for longer than a minute on a stock Eclair AND stock Froyo (from twinky's advice), you probably have a serious hardware issue. Did this device you bought ever work properly for you? That's important. If you really bought a phone that you never saw working, it's most likely hopelessly dead. If it worked, and showed the reported error after a day, there might be hope.
edit: I had countless bootloops/flash FAILs/tons of FC after 1st boot/corrupted FS... don't give up! As long as download mode is still accessable, it's not dead yet!
martialaw said:
After watching your youtube video I am confused. You try to get in into recovery, but don't even wait 10 seconds before you remove the battery?
Before you start make sure the battery is not empty or even broken. Charge until it reports full.
Battery out for a while, remove charging cable. Then battery in, press Vol+ and Vol-, add Home, then Power, as soon as something appears onscreen let go all three. Then WAIT. What happens?
If it stays on the GT I5800 screen for longer than a minute on a stock Eclair AND stock Froyo (from twinky's advice), you probably have a serious hardware issue. Did this device you bought ever work properly for you? That's important. If you really bought a phone that you never saw working, it's most likely hopelessly dead. If it worked, and showed the reported error after a day, there might be hope.
edit: I had countless bootloops/flash FAILs/tons of FC after 1st boot/corrupted FS... don't give up! As long as download mode is still accessable, it's not dead yet!
Click to expand...
Click to collapse
Dude u rly think i am so stupid?
Phone was working when i bought it i suspect that some sort of application crashed it( i guess taskkiller), i did tried to take out battery for longer time even 1 day ... And i did tried to hold buttons longer
Its bad flash that has made the situation...
Flash zero fill.tar which will clean your system
Flash again a rom using 'Forced download mode' ( vol+, home, power button)
Note: you should restart your phone by keys when its still on after zero fill flash using the force download keys.
Sent from my GT-I5800 using xda premium
KamelusPL said:
Dude u rly think i am so stupid?
Phone was working when i bought it i suspect that some sort of application crashed it( i guess taskkiller), i did tried to take out battery for longer time even 1 day ... And i did tried to hold buttons longer
Click to expand...
Click to collapse
Sorry, I was just telling from the video. But a software like taskkiller cannot mess up the whole phone in a way that prevents access to recovery.
Try cleaning the ROM like in above post and then flash a bootloaderfree stockrom. That should leave you with a perfect situation to start all over again.
Hi,I don't know if the word "bricked" or "drowned" is the best match for my case,but anyways here is my story:I had installed on my phone the kyrilos rom,I don't remember wich version excactly it has been too long before.My phone fell into a glass of water,I pulled battery out,dried it up with hair styler,after that it had some water marks on the screen and it was working quite good,I re-flashed it abd worked better,the watwr marks on the screen dissappeared and got better...but...my girlfriend reebooted accidently in recovery and it dropped dead,froze,I pulled the battery out,reebooted,and after that I am stuck in phone's logo and it keeps loading nothing ..forever..and I can't even boot to recovery mode..any ideas?I've searched in this blog and I couldn't find anything to do..please help me..
Sent from my GT-S6500 using xda premium
can someone help me how to revive my friend phone it doesn't booting up.. can someone provide a instruction on how to flash it ??
CrowsZer0 said:
can someone help me how to revive my friend phone it doesn't booting up.. can someone provide a instruction on how to flash it ??
Click to expand...
Click to collapse
It's not clear if you are saying it doesn't power on at all or if you're saying it does power on but stops/reboots somewhere during boot?
If it does power on but gets stuck somewhere, can you get to OpenRecovery (press and hold and keep holding volume up button after powering on)? If you can't get into OpenRecovery, you'll need to use RSDlite (Windows) or sbf_flash (linux,mac) to flash a stock SBF (get one from sbf.droid-developers.org). Or you can try getting into stock recovery and doing a factory reset.
If it doesn't power on at all, then maybe the problem is your battery/charging or worse. Sometimes the charging gets stupid.
My Motorola Xoom won't turn OFF and stuck on M logo. Please, can you help me ?
I assume battery drain has turned it off for you by now. In the future, pressing the power button and volume up at the same time should help.
LaserChicken said:
I assume battery drain has turned it off for you by now. In the future, pressing the power button and volume up at the same time should help.
Click to expand...
Click to collapse
My tablet is OFF only when the battery is empty, it is normal, but the same thing happens when you get the power back.
By pressing the power button and volume up at the same time, not helping me. Just a quick restart ...
Thanks !
Minolta2003 said:
My tablet is OFF only when the battery is empty, it is normal, but the same thing happens when you get the power back.
By pressing the power button and volume up at the same time, not helping me. Just a quick restart ...
Thanks !
Click to expand...
Click to collapse
Can you go to recovery?
superbay said:
Can you go to recovery?
Click to expand...
Click to collapse
Yes, in recovery menu I accessed WIPE DATA/FACTORY RESET and WIPE CACHE PARTITION
I tried to REBOOT without SD Card also
Nothing change !
Minolta2003 said:
Yes, in recovery menu I accessed WIPE DATA/FACTORY RESET and WIPE CACHE PARTITION
I tried to REBOOT without SD Card also
Nothing change !
Click to expand...
Click to collapse
As far as i know your Xoom might be romless. Try flashing any rom from your sdcard and lets see what happens
superbay said:
As far as i know your Xoom might be romless. Try flashing any rom from your sdcard and lets see what happens
Click to expand...
Click to collapse
Can you teach me how can I flash the rom through Fastboot because ADB is not recognized by the computer, cannot install MTP driver.
Minolta2003 said:
Can you teach me how can I flash through Fastboot because ADB is not recognized by the computer, cannot install MTP driver.
Click to expand...
Click to collapse
Im sorry i cant. Im not familiar with such way since flashing from sdcard is more simple for me. Computer not recognizing device because of MTP driver is known for common issue though. Dont you want to try flashing from sdcard? Its easier if one is present.
superbay said:
Im sorry i cant. Im not familiar with such way since flashing from sdcard is more simple for me. Computer not recognizing device because of MTP driver is known for common issue though. Dont you want to try flashing from sdcard? Its easier if one is present.
Click to expand...
Click to collapse
Yes, shure, the sdcard is present, and I want to know how to do this, step by step. Thank you !
Minolta2003 said:
Yes, shure, the sdcard is present, and I want to know how to do this, step by step. Thank you !
Click to expand...
Click to collapse
Just copy the rom and gapps to the sdcard and simply flash them from the recovery. Or if you want to update the revovery, you can also put it in the sdcard and flash it before you flash the rom. Wipe cache lastly
superbay said:
Just copy the rom and gapps to the sdcard and simply flash them from the recovery. Or if you want to update the revovery, you can also put it in the sdcard and flash it before you flash the rom. Wipe cache lastly
Click to expand...
Click to collapse
This is my recovery menu:
Android System Recovery <3e>
reboot system now
apply update from USB drive
wipe data/factory reset
wipe cache partition
1. Please tell me how can copy files, flash or update from recovery with this options ?
2. You know the download links for rom, gapps and update files ?
Thanks !
Minolta2003 said:
This is my recovery menu:
Android System Recovery <3e>
reboot system now
apply update from USB drive
wipe data/factory reset
wipe cache partition
1. Please tell me how can copy files, flash or update from recovery with this options ?
2. You know the download links for rom, gapps and update files ?
Thanks !
Click to expand...
Click to collapse
Gee so sorry. I thought you have custom recovery like cwm or twrp. Apparently you still have stock recovery there. So i guess you need to download the stock image for your Xoom and, yes you are correct, flash them from fastboot then. Long long time ago, i ever did this but i dont really remember all things. But all i know is that I followed steps from here http://androidforums.com/xoom-all-things-root/653230-return-your-xoom-stock.html. Pay attention for post #37 since all commands i applied are from there. If you need different version of image, you can try looking which fits yours here http://forum.xda-developers.com/showthread.php?t=1049485. As i told you before, ive done this long time ago so i dont remember what i did at that time but i succeeded by following the steps. However, im here to help you as far as i can. Keep me updated with your process there
superbay said:
Gee so sorry. I thought you have custom recovery like cwm or twrp. Apparently you still have stock recovery there. So i guess you need to download the stock image for your Xoom and, yes you are correct, flash them from fastboot then. Long long time ago, i ever did this but i dont really remember all things. But all i know is that I followed steps from here http://androidforums.com/xoom-all-things-root/653230-return-your-xoom-stock.html. Pay attention for post #37 since all commands i applied are from there. If you need different version of image, you can try looking which fits yours here http://forum.xda-developers.com/showthread.php?t=1049485. As i told you before, ive done this long time ago so i dont remember what i did at that time but i succeeded by following the steps. However, im here to help you as far as i can. Keep me updated with your process there
Click to expand...
Click to collapse
Your advice was definitely the solution, but I did not get to do anything because my Xoom is stuck in black screen and cannot power it on
I do not know the cause. It's incredible what happens !
Suddenly started to reboot itself, then stopped completely. It was only connected to the original charger and USB, ready for install drivers and flash.
The power led is ok (white and green, after few minutes) I removed the battery, the voltage is correct, and nothing ...
Do you have any idea?
Minolta2003 said:
Your advice was definitely the solution, but I did not get to do anything because my Xoom is stuck in black screen and cannot power it on
I do not know the cause. It's incredible what happens !
Suddenly started to reboot itself, then stopped completely. It was only connected to the original charger and USB, ready for install drivers and flash.
The power led is ok (white and green, after few minutes) I removed the battery, the voltage is correct, and nothing ...
Do you have any idea?
Click to expand...
Click to collapse
Well that's new for me. Did you have that after you do the whole process? when did you get the black screen? Cant go to fastboot either?
How are you charging? wall charger how long? Which Xoom do you have?
Sent from my Motorola Galaxy s3 using xda app-developers app
superbay said:
Well that's new for me. Did you have that after you do the whole process? when did you get the black screen? Cant go to fastboot either?
Click to expand...
Click to collapse
No, before, when my tablet was with my initial problem (Won't turn OFF and stuck on M logo).
Suddenly it started to reboot itself and stuck each time at M logo, then stopped completely, after 4-5 cycles.
During this time, I followed the steps in this link till the point 6 (reboot your computer, plug in your Xoom and allow the drivers to install), with WiFi Xoom Restore downloaded files.
Black screen, no fastboot, no android recovery, nothing, just a green light when charging with original wall charger (SPN5632B)
Chadwick108 said:
How are you charging? wall charger how long? Which Xoom do you have?
Sent from my Motorola Galaxy s3 using xda app-developers app
Click to expand...
Click to collapse
With Original Motorola Wall Charger SPN5632B, no long time because my tablet was almost always connected to the charger.
The battery has 8 volts and charger 12 volts.
If I disconnect the charger and hook it back, the white light stay bright about 10 minutes, then turns green.
Motorola XOOM Wi-Fi - MZ604
From what I remember, last days when charging, the Xoom jacks area was warm, now is cold. Maybe it is normal to be cold if the tablet is fully charged now, I don`t know exactly if this is a good indication for helping me...
Minolta2003 said:
No, before, when my tablet was with my initial problem (Won't turn OFF and stuck on M logo).
Suddenly it started to reboot itself and stuck each time at M logo, then stopped completely, after 4-5 cycles.
During this time, I followed the steps in this link till the point 6 (reboot your computer, plug in your Xoom and allow the drivers to install), with WiFi Xoom Restore downloaded files.
Black screen, no fastboot, no android recovery, nothing, just a green light when charging with original wall charger (SPN5632B)
Click to expand...
Click to collapse
Green light indicates that the battery is full. Your case is not an ordinary one though. What happens if you press volume up+power button? Does it even boot? At least to the fastboot?
Anyway, previously you said that you removed the battery. Did you tear up your Xoom?
superbay said:
Green light indicates that the battery is full. Your case is not an ordinary one though. What happens if you press volume up+power button? Does it even boot? At least to the fastboot?
Anyway, previously you said that you removed the battery. Did you tear up your Xoom?
Click to expand...
Click to collapse
Yes, it is very difficult to understand what happened in this case. No logo, no boot, no fastboot, is power off
Now (Volume up + Power) = Nothing, same black screen
Before (Volume up + Power) = Reset
Yes, I tear up my Xoom
Minolta2003 said:
Yes, it is very difficult to understand what happened in this case. No logo, no boot, no fastboot, is power off
Now (Volume up + Power) = Nothing, same black screen
Before (Volume up + Power) = Reset
Yes, I tear up my Xoom
Click to expand...
Click to collapse
Im afraid i could not give you further suggestion other than removing sdcard and trying booting it up again with any means or keep pressing the volume up+power button for at least a minute. If it doesnt give you any good, well then sorry im done by this point.
Any history about the tablet? The one that pushed you to tear up the device maybe? What happened before the tablet's gone weird?
Hi there,
Kindly help... I successfully installed B512 on my TL10 using force upgrade method, afterwhich I changed recovery to TWRP 3.0.2 using mobopx v2.2, which was also successful. And then I installed SuperSU 2.46 via TWRP, then cleared cache/dalvik. But upon rebooting system, I get a blank screen, even after waiting for more than 15 minutes.
And so I tried going to TWRP (Vol+ and power), which was successful, in order to boot to bootloader, with the intention of loading back the stock bootloader via adb, so that I can force install B512 from my microSD card again. It seemed to install fine...
However, at this point, I cannot reboot to bootloader (Vol- and power) anymore, I only get blank screen. Trying recovery (Vol+ and power) doesn't work either. Rebooting normally gives me the same. I cannot by any means connect via adb now.
Is there any way to unbrick my phone at this point?
Thanks so much. Cheers.
Works entrance for the recovery (Vol+ and Vol- and Power)?
rakrakrak said:
Works entrance for the recovery (Vol+ and Vol- and Power)?
Click to expand...
Click to collapse
No bro...
eusagc said:
However, at this point, I cannot reboot to bootloader (Vol- and power) anymore, I only get blank screen. Trying recovery (Vol+ and power) doesn't work either. Rebooting normally gives me the same. I cannot by any means connect via adb now.
Click to expand...
Click to collapse
What happens when you do a Vol up + power?
CloudCompute said:
What happens when you do a Vol up + power?[/QU
The phone "doesn't want to turn off" bro. It has fully discharged, but as soon as I plug the charger in, it immediately powers up. When it does, now it shows the Huawei logo. But it's stuck there, and if I press the power button for a few secs, it will power down, but immediately power up again...
Click to expand...
Click to collapse
eusagc said:
CloudCompute said:
What happens when you do a Vol up + power?[/QU
The phone "doesn't want to turn off" bro. It has fully discharged, but as soon as I plug the charger in, it immediately powers up. When it does, now it shows the Huawei logo. But it's stuck there, and if I press the power button for a few secs, it will power down, but immediately power up again...
Click to expand...
Click to collapse
Let it get fully charged first. Then remove the charger and keep the Vol up and power button pressed for ~10 secs or more, and see where it takes you.
Click to expand...
Click to collapse
CloudCompute said:
eusagc said:
Let it get fully charged first. Then remove the charger and keep the Vol up and power button pressed for ~10 secs or more, and see where it takes you.
Click to expand...
Click to collapse
Ok dude, will do. Thanks!
Click to expand...
Click to collapse
CloudCompute said:
eusagc said:
Let it get fully charged first. Then remove the charger and keep the Vol up and power button pressed for ~10 secs or more, and see where it takes you.
Click to expand...
Click to collapse
Done bro. Although I must say, I'm kinda back like yesterday when the phone is just helplessly discharging until it drops dead. Pressing vol+ and power restarts the phone, but I'm still stuck at the logo...
Click to expand...
Click to collapse
CloudCompute said:
Done bro. Although I must say, I'm kinda back like yesterday when the phone is just helplessly discharging until it drops dead. Pressing vol+ and power restarts the phone, but I'm still stuck at the logo...
Click to expand...
Click to collapse
You seem to be in a sticky situation bro. Your recovery seems to be broken because in stock recovery Vol up + power should ideally take you to recovery and not restart. If you could somehow boot into fastboot mode then it could open up some options to bring your phone to life.
With no way to connect to the phone the only options left are the hardware buttons. I am sure you'd have tried them already, but just in case you have not, try the other 2 key combinations also, Vol down + power and Vol up + Volume down + power, for ~10 secs, to check if any of these either forces a factory reset or boots the phone into fastboot mode.
eusagc said:
Hi there,
Kindly help... I successfully installed B512 on my TL10 using force upgrade method, afterwhich I changed recovery to TWRP 3.0.2 using mobopx v2.2, which was also successful. And then I installed SuperSU 2.46 via TWRP, then cleared cache/dalvik. But upon rebooting system, I get a blank screen, even after waiting for more than 15 minutes.
And so I tried going to TWRP (Vol+ and power), which was successful, in order to boot to bootloader, with the intention of loading back the stock bootloader via adb, so that I can force install B512 from my microSD card again. It seemed to install fine...
However, at this point, I cannot reboot to bootloader (Vol- and power) anymore, I only get blank screen. Trying recovery (Vol+ and power) doesn't work either. Rebooting normally gives me the same. I cannot by any means connect via adb now.
Is there any way to unbrick my phone at this point?
Thanks so much. Cheers.
Click to expand...
Click to collapse
Go back to stock recovery reflash stock rom make sure you have a unlocked bootloader......all remember that Google is your friend.....
CloudCompute said:
You seem to be in a sticky situation bro. Your recovery seems to be broken because in stock recovery Vol up + power should ideally take you to recovery and not restart. If you could somehow boot into fastboot mode then it could open up some options to bring your phone to life.
Click to expand...
Click to collapse
That's correct bro. Although it appears from adb that I was able to install the stock recovery, I cannot access it with Vol+ and power.
CloudCompute said:
With no way to connect to the phone the only options left are the hardware buttons. I am sure you'd have tried them already, but just in case you have not, try the other 2 key combinations also, Vol down + power and Vol up + Volume down + power, for ~10 secs, to check if any of these either forces a factory reset or boots the phone into fastboot mode.
Click to expand...
Click to collapse
Yes, I did. And I can't even boot to bootloader after all that... The phone only seems to charge, but is stuck at the logo.
I'm ready to send this to Huawei's service center. Is there anything more I can do at this point before I do that? Thanks so much.
stinka318 said:
Go back to stock recovery reflash stock rom make sure you have a unlocked bootloader......all remember that Google is your friend.....
Click to expand...
Click to collapse
Thanks bro, but that's what I did, or at least was planning to do. After rooting B512 via TWRP, the phone got stuck at the logo. And so I tried to install stock recovery, which it did, in order to reflash the stock ROM. But at this point I'm still stuck at the logo, and I can't access recovery and BL anymore. The BL is unlocked right from the start...
eusagc said:
Thanks bro, but that's what I did, or at least was planning to do. After rooting B512 via TWRP, the phone got stuck at the logo. And so I tried to install stock recovery, which it did, in order to reflash the stock ROM. But at this point I'm still stuck at the logo, and I can't access recovery and BL anymore. The BL is unlocked right from the start...
Click to expand...
Click to collapse
Did you try volume down and then plug USB in on computer then command prompt fast boot reboot it may work.
eusagc said:
I'm ready to send this to Huawei's service center. Is there anything more I can do at this point before I do that? Thanks so much.
Click to expand...
Click to collapse
Go ahead, send it to Huawei service centre. They'll have ways to reach the internal memory after opening up the device.
stinka318 said:
Did you try volume down and then plug USB in on computer then command prompt fast boot reboot it may work.
Click to expand...
Click to collapse
Thank you for this suggestion brother. I tried exactly as you described, however, the phone looks badly discharged, and while the screen was blinking/showing the red battery icon, it doesn't seem to want to charge. I waited around 5 minutes, but nothing seems to progress from here.
And so now, I moved the USB cable to a proper charger, and now it seems to be charging, with the LED light a steady red, and the screen the normal red circle with "0%" inside. It seems to be charging at the moment, although I really have to wait until it shows "1%" until I can surely say so.
One thing that's different now is that the phone hasn't turned on (by itself) yet. And at least this looks promising.
I'll let you know what happens in a while... Thank you!
eusagc said:
Thank you for this suggestion brother. I tried exactly as you described, however, the phone looks badly discharged, and while the screen was blinking/showing the red battery icon, it doesn't seem to want to charge. I waited around 5 minutes, but nothing seems to progress from here.
And so now, I moved the USB cable to a proper charger, and now it seems to be charging, with the LED light a steady red, and the screen the normal red circle with "0%" inside. It seems to be charging at the moment, although I really have to wait until it shows "1%" until I can surely say so.
One thing that's different now is that the phone hasn't turned on (by itself) yet. And at least this looks promising.
I'll let you know what happens in a while... Thank you!
Click to expand...
Click to collapse
Charging's at 4% now... And the phone hasn't turned on so far... Looks promising...
eusagc said:
Charging's at 4% now... And the phone hasn't turned on so far... Looks promising...
Click to expand...
Click to collapse
All well now?
CloudCompute said:
All well now?
Click to expand...
Click to collapse
I was out of town for the past few weeks and didn't have time to do this. I'm back now and plan to work on this tonight. Thank you bro, I'll let you know how it goes...