Related
Hi,
I have my Sensation 2.3.3 S-Off, Super-CID, all that stuff, although it is on stock firmware.
Just wondering, does anyone know from experience or otherwise, will the new 2.3.4 update cause any problems? Bricking caused by update or anything?
I'd rather not S-On manually as I'd have to reflash firmware and I don't want to lose all my personal data, apps, etc.
I don't really care if it goes S-on, as long as it still works!!
Thanks!
P.s. I debranded from Vodafone to Stock Europe, can the CID be rewritten?
--Removed--
Seriously,
U'v come this far and have not flash'd some InsertCoin 2.2.2 Sense
into your Sensation yet? (2.3.4 with OC safely op to 1.5 GHz)
Check this tread and discover what you'v been missing out on.
Get titanium to backup your apps, spend some quality time with your phone and you'll never regret it!
It was the first thing i did after S-off and rooting.
Flashing the radio could be a little "exciting" but whent without a hitch for me. (and most of us)
You'll never go back.... promise!
Jesus, just realized i sound like an infomercial,....
12013E12T said:
Seriously,
U'v come this far and have not flash'd some InsertCoin 2.2.2 Sense
into your Sensation yet? (2.3.4 with OC safely op to 1.5 GHz)
Check this tread and discover what you'v been missing out on.
Get titanium to backup your apps, spend some quality time with your phone and you'll never regret it!
It was the first thing i did after S-off and rooting.
Flashing the radio could be a little "exciting" but whent without a hitch for me. (and most of us)
You'll never go back.... promise!
Jesus, just realized i sound like an infomercial,....
Click to expand...
Click to collapse
I have to agree, InsertCoin 2.2.2 Sense rom just rocks. If you want to go to Android 2.3.4, just flash this or one of the other custom roms out there that have been updated already using the EU stock rom.
Flashing InsertCoin now! Seems to be going well.
So much easier than expected!
Thanks for the sales pitch, worked a treat!
On the white HTC boot screen for nearly 20 minutes...
Doesn't seem to be looping, just not doing anything???
ok,... that kinda sucks.....
Did u get it going already?
What guide (if any) did u follow?
At what point did this happen?
Can you adb to it?
It's all good now, wiped data with CWM and reflashed and It's working!
Love the speed... Just need to update the radio and flash the overclock kernel.
When updating the radio CWM keeps saying "wrong zip file" though. Any ideas on what could be going on there?
Also, how do you flash to 2.2.2 and the overclock kernel? Just copy to SD and use CWM?
Thanks!
Sent from my HTC Sensation Z710e using XDA App
Glad to hear it worked out.
And now to top it all up with a recent radio file and some oc madness
Doing the following is on your own risk! I din't force you to do it,
think before act and don't blame me when [email protected]#g it up.
To flash the radio you should,
Download this radio file,
Make sure the filename is PG58IMG.zip exactly or it will not work.
copy it to the root of your sd card.
Download a md5 checker from te market and check the file, The md5 should match up with this one.
md5: 64a0383b87b4b780cf516f7d7e43b784
If not, redownload & try again.
this is very imporant!!
If you flash a corrupted file you will own a very expensive brick!
Now:
Turn your phone off, take out the battery.....wait a few seconds and put it back in.
power up your phone while holding down the vol- button.
The bootloader will scan for the radio update.
Once it finds the update, select Yes.
Allow the bootloader to finish flashing the updated radio, and boot
The radio file is now flashed.
Remove de PG58IMG.zip file from your SD card BEFORE rebooting your phone or it'll try to flash it again when powering up after draining your battery.
To flash the 2.2.2. ROM
put it on your sd card
recovery - wipe all (data/factory reset)
select the file in cwm en confirm.
Also, Never install a theme on an unbooted fresh install, leads to f/cs.
Kernel can be done in cwm aswell by selecting the file and flashing it.
The tool to oc it is included.
Thats it. Good luck, and let me know.
Wow!
Thanks for the noob-friendly tutorial!!
Will try it later tonight and let you know how it goes.
Just with the radio update, fastboot keeps saying "wrong zip file" or something like that... Md5 was correct but still nothing... Bit will try again
Do I definitely need to wipe everything to flash 2.2.2? I have titanium set up and everything backed up anyway, but just wondering. Losing my data for a third time will make me cry a little!
Again, thank you!!
Sorry, also, in CWM do I just "install zip from sd card" to flash the kernel and 2.2.2 ROM, yeah?
Your welcome
I know it sucks, you don't have to wipe BUT, it can (not saying it will) lead to strange issues like force closes etc.
It's up to you.
About the radio file,
Im pretty sure you have the radio file in the wrong location.
It should be placed in the root of your sd card, not the root of your divice.
So like this /sdcard/PG58IMG.zip
NOT in /PG58IMG.zip
khanley said:
Hey, got the radio working perfectly. Trying to copy the 2.2.2 Rom now and it just wont copy onto the SD through copy and paste or adb push. I have no idea what's wrong with it...
Click to expand...
Click to collapse
Are you sure there is enough free space on your SD-card?
If so, try downloading it directly on your phone.
Got everything working! Have insertcoin 2.2.1 with UnityV7 working perfectly (2.2.2 is unstable on my phone... SU, gmail and facebook all force close)
Absolutely delighted with the results! Wont be looking back
Turns out the problem was a bad SD card (which is making me cry since it's a kingston 16GB class 10)
Anyway, thanks for all your help, I really appreciate it!
Nice! Glad it worked out, and sorry for your loss
Sorry to hear 2.2.2 is not stable for you tho.
Baad (the InsertCoin ROM cook) mentioned a few days ago that work is being done on a new kernel especially written for his ROM so maybe that's worth a shot in a couple off days....
Anyways,....glad i could help, happy camping!
Hello All,
I am a avid XDA reader and follower. I don't post allot, but do allot of reading and tooling around. That being said I have read and tried many different option for my issue.
Device: I9020T on T-Mobile US
Issue: "Baseband Unknown" / No Cell Service
-Under Settings/About Phone. My Baseband version = Unknown
-My signal bars are greyed out with a small "X"
-Everything else works, wifi, camera, ect...
When in FASBOOT the following is listed:
-Product Name: Harring
-HW Version: REV 11
-Bootloader Version: I9020XXKA3
-Baseband Version: I9020XXKD1
-Carrier Info: EUR
-Serial Number: This matches the on on my box
The issue started after I installed one of the latest KANG builds of CM7 nightly builds. I also had flashed [KERNEL] [gpl] NS/NS4G Trinity (E)UV and OC 2.6.35.13/.14 BFS .404, CM7 + m(any) roms.
This combo had been working good for at least 8-10 hours until I was listening to music through PowerAMP, when all of the sudden the music sounded like a CD skipping. The screen was unresponsive and no buttons or combo of buttons did any thing. I hesitated but eventually had to pull the battery.
When I powered the phone back up it hung at the trinity boot logo and just froze. After several reboots with the same results, I resorted to flashing a different ROM through Recovery. That's when I noticed the issue at hand.
As I was typing this I noticed it was strange that fast boot listed my carrier info as EUR??? Is this maybe because I'm currently running [ROM] Gingerbread Peter Alfonso (GPA17)? I flashed the ROM listed for my phone.
Anyways here is what I have tried:
-Flashing a NANDROID of stock 2.3.2 through Recovery
-ADB/Fastboot flashing the various radios for my model
-Flashing radios through Recovery
-Flashing ROMS meant for my phone with radios in them
-Even found everything I needed and used ODIN to get back to factory fresh!!!
So sorry for the long post but I am out of ideas and am thinking it my actually be a hardware issue.
Thought I'd throw this out to you all and see if there are any ideas I may have not tried.
Thanks in advance for any ideas or advice.
can you install a stock rom back onto it? There is a baseband selection mode that you may have to do.
http://forum.xda-developers.com/showthread.php?t=1116884
1. Go to Dialer. Dial *#*#4636#*#*
2. Go to Phone information. Choose the preferred network to
"GSM Auto PRL" or "CDMA Auto PRL" or whatever you have.
3. Scroll down, deactivate and activate Phone Radio.
4. Press Menu button.
5. Select Phone frequency, then choose your country.
6. In the previous menu push the Home button to go back to Homescreen.
7. Reboot.
(By Brainmaster)
Ive had to run this a few times depending on radio and rom.
after many trials I am sticking with rooted stock.
Wow that is defiantly a menu I have never seen before.
It doesn't let me select any of the preferred carrier option. When I tap on GSM auto (PRL) it just closes and defaults back Unknown.
It's ded?
Sent from my HTC Phone
thepyro6 said:
It's ded?
Sent from my HTC Phone
Click to expand...
Click to collapse
Ya, I think it is. RIP Nexus S. HTC Sensation here I come.
after you select gsm auto you hit the menu button on your phone then select the carrier. I know its not labeled what it is on the walkthrough but its similar. not phone frequency but like signal or something. then yuo jsut select usa.
reboot and it should find whatever your service is on its own.
have you tried going back to stock rom? I used this version to go back when i thought i bricked out my phone and its been great. I think my friend used it too but he wont admit he used somethign i gave him.
http://forum.xda-developers.com/showthread.php?t=1060192
http://forum.xda-developers.com/showthread.php?t=1038007
Same issue also involved the trinity kernel. Dev may need to be notified.
kmmxracer said:
Hello All,
I am a avid XDA reader and follower. I don't post allot, but do allot of reading and tooling around. That being said I have read and tried many different option for my issue.
Device: I9020T on T-Mobile US
Issue: "Baseband Unknown" / No Cell Service
-Under Settings/About Phone. My Baseband version = Unknown
-My signal bars are greyed out with a small "X"
-Everything else works, wifi, camera, ect...
When in FASBOOT the following is listed:
-Product Name: Harring
-HW Version: REV 11
-Bootloader Version: I9020XXKA3
-Baseband Version: I9020XXKD1
-Carrier Info: EUR
-Serial Number: This matches the on on my box
The issue started after I installed one of the latest KANG builds of CM7 nightly builds. I also had flashed [KERNEL] [gpl] NS/NS4G Trinity (E)UV and OC 2.6.35.13/.14 BFS .404, CM7 + m(any) roms.
This combo had been working good for at least 8-10 hours until I was listening to music through PowerAMP, when all of the sudden the music sounded like a CD skipping. The screen was unresponsive and no buttons or combo of buttons did any thing. I hesitated but eventually had to pull the battery.
When I powered the phone back up it hung at the trinity boot logo and just froze. After several reboots with the same results, I resorted to flashing a different ROM through Recovery. That's when I noticed the issue at hand.
As I was typing this I noticed it was strange that fast boot listed my carrier info as EUR??? Is this maybe because I'm currently running [ROM] Gingerbread Peter Alfonso (GPA17)? I flashed the ROM listed for my phone.
Anyways here is what I have tried:
-Flashing a NANDROID of stock 2.3.2 through Recovery
-ADB/Fastboot flashing the various radios for my model
-Flashing radios through Recovery
-Flashing ROMS meant for my phone with radios in them
-Even found everything I needed and used ODIN to get back to factory fresh!!!
So sorry for the long post but I am out of ideas and am thinking it my actually be a hardware issue.
Thought I'd throw this out to you all and see if there are any ideas I may have not tried.
Thanks in advance for any ideas or advice.
Click to expand...
Click to collapse
did you happen to flash the ns4G version of [ROM] Gingerbread Peter Alfonso (GPA17)? that would make sense then why you dont have any signal, considering your on tmobile and the ns4g is sprint.
simms22 said:
did you happen to flash the ns4G version of [ROM] Gingerbread Peter Alfonso (GPA17)? that would make sense then why you dont have any signal, considering your on tmobile and the ns4g is sprint.
Click to expand...
Click to collapse
No im absolutely sure i flashed the right ROM. Peter Alfanzo was a ROM i flashed after this issue happened. It was the CM7 nightly + Trinity kernel that did me in...
Sent from my Nexus S using XDA Premium App
simms22 said:
did you happen to flash the ns4G version of [ROM] Gingerbread Peter Alfonso (GPA17)? that would make sense then why you dont have any signal, considering your on tmobile and the ns4g is sprint.
Click to expand...
Click to collapse
Sorry to hijack the thread, but I have the same problem as the OP and I think this is exactly what I did wrong.
I wasn't paying attention when I updated Cyanogenmod and I chose the Nexus s 4G instead of regular Nexus s.
Ever since then my baseband has been "unknown" (except in fastboot, where is shows as KB3 (which I updated to as one of my attempts to fix it).
I have gone back to stock, no change. I have updated the radio, no change.
I have no idea what else to do. Does anyone have any ideas??
Canehdianman said:
Sorry to hijack the thread, but I have the same problem as the OP and I think this is exactly what I did wrong.
I wasn't paying attention when I updated Cyanogenmod and I chose the Nexus s 4G instead of regular Nexus s.
Ever since then my baseband has been "unknown" (except in fastboot, where is shows as KB3 (which I updated to as one of my attempts to fix it).
I have gone back to stock, no change. I have updated the radio, no change.
I have no idea what else to do. Does anyone have any ideas??
Click to expand...
Click to collapse
have you tried reformatting all your phones partitions?
simms22 said:
have you tried reformatting all your phones partitions?
Click to expand...
Click to collapse
I've wiped user data/factory reset a few times now. Is there a higher-level format option that I should be using?
I thought for sure that going back to stock (based on these instructions - theunlockr.com/2011/01/20/how-to-unroot-the-nexus-s/) would work, but no such luck.
I find it perplexing that the baseband shows in fastboot, but nowhere else. *#*#4636#*#* shows radio off and network type unknown, settings/about phone/ shows baseband version unknown.
I tried different methods that I've found online over the weekend, but nothing has brought my radio back.
I am certainly open to suggestions!
I'm going to provide as much additional information as possible.
I have a Nexus S I9020A, running on Fido (Canada).
My initial problem stems from when I updated to cyanogenmod 7.1 from 7.0. My first (and likely biggest) mistake was not making a backup. Oops.
I think I accidentally chose "Nexus S 4G" instead of "Nexus S". As soon as I did that, I stopped getting any cellular voice or data connection (wifi continues to work fine). Under Phone Information, it said it was a Nexus S 4G.
The phone locks itself into airplane mode now. When I try to turn airplane mode off through the settings menu, it hangs. When I hold down power and choose "turn airplane mode off" it seems to work, but then I still get no signal.
I have pushed it back down to stock. It now remembers that it is a Nexus S (not 4G), but it didn't help the baseband problem.
I have tried to reflash the baseband. no effect.
I called Fido and got them to "repush" the SIM card. No effect.
I am humbly appreciative of any and all help that anyone can provide!
EDIT: Nvm! Lol just saw your post above mine lol just was to lazy to read lol
Not sure if you already did this but if u have root explorer or if u don't go to 4shared.com and type in root explorer v 2.16
Back up efs file first
Open root explorer and find the efs file. Press and hold/ Move :
"nv.log"
"nv_data.bin" and
"nv._data.bin.md5"
Into Root Of SD card... reboot phone and u should have ur 3G back
Sent From In between Your Moms Boobies
YourMainDude said:
EDIT: Nvm! Lol just saw your post above mine lol just was to lazy to read lol
Not sure if you already did this but if u have root explorer or if u don't go to 4shared.com and type in root explorer v 2.16
Back up efs file first
Open root explorer and find the efs file. Press and hold/ Move :
"nv.log"
"nv_data.bin" and
"nv._data.bin.md5"
Into Root Of SD card... reboot phone and u should have ur 3G back
Sent From In between Your Moms Boobies
Click to expand...
Click to collapse
Thanks! This is similar to some other threads I saw on the android forum (and elsewhere on XDA).
I'll try this when I get home (and get to a reliable wifi signal).
Wow! I haven't looked at my post in a wile. Hopefully you all are getting some resolution to these issues. I ended up calling Samsung and they agreed to fix my Nexus under warranty. They replaced some parts that I can't remember off the top of my head, but it should arive at my door tomorrow!!!
Sent from my HTC Sensation 4G using xda premium
YourMainDude said:
EDIT: Nvm! Lol just saw your post above mine lol just was to lazy to read lol
Not sure if you already did this but if u have root explorer or if u don't go to 4shared.com and type in root explorer v 2.16
Back up efs file first
Open root explorer and find the efs file. Press and hold/ Move :
"nv.log"
"nv_data.bin" and
"nv._data.bin.md5"
Into Root Of SD card... reboot phone and u should have ur 3G back
Sent From In between Your Moms Boobies
Click to expand...
Click to collapse
Hmmm bad news... my efs folder appears to be empty. Now what?
A very frustrating day... Thought i would have it fixed pretty quick, alas....
My efs folder is empty. I guess that explains the lack of radio, but it appears that i might need to send the phone to Samsung to get the efs reflashed. Is there a way to write it back myself? Ill look tomorrow i guess.
Here is some more info:
I just tried to update to 2.3.6
Clockwork mod is giving me an error message:
Assert failed: getprop("ro.product.device") == "crespo" || get prop("rp.build.product") == "crespo"
E:error in [filename]
(Status 7)
Installation aborted
Not sure if that helps but it's another piece of thepuzzle hopefully.
*sigh*
So it appears that I need a backup of my /efs folder in order to fix this myself (which I do not have).
I know what my IMEI should be, however I have no idea if it is even possible to take someone else's backup and alter it the proper IMEI.
I fear my next option will be to submit it for repair at a Samsung repair shop (and be without a phone even longer )
Hello,
I Have Updated My LG G2x To The GB Update 2.3.3 But It Hasn't Resolved Any Of The Issues They Said It Would. The Phone Still Shuts Off, Screen Locks And Never Comes Back, And The Data Is Constantly Hanging. I Am Looking For A Way To Root My Phone So That I Can Install A Custom Rom. Ive Tried SuperOneClick And Gingerbreak And Both Ended In Failure. Please If Anyone Has Any Info On How To Do So Please Let Me Know.
Thank You,
ZiggySoWavy said:
Hello,
I Have Updated My LG G2x To The GB Update 2.3.3 But It Hasn't Resolved Any Of The Issues They Said It Would. The Phone Still Shuts Off, Screen Locks And Never Comes Back, And The Data Is Constantly Hanging. I Am Looking For A Way To Root My Phone So That I Can Install A Custom Rom. Ive Tried SuperOneClick And Gingerbreak And Both Ended In Failure. Please If Anyone Has Any Info On How To Do So Please Let Me Know.
Thank You,
Click to expand...
Click to collapse
read earlier you just have to installed clockwork and flash a rom with superuser, not sure if thats true but it makes sense. Im probably going to be getting a g2x today, with gb on it and will flash custom rom.
Here you have too use nvflash too install cwm recovery then download and install a rooted rom. Either eagleblood or weapon g2x then place on your sd card power off phone power on whille holding power and vol down flash the zip from sd card go here follow the instructions its very very simple http://forum.xda-developers.com/showthread.php?t=1056847 yes it works with 2.3. I bought my phone preloaded with gingerbread. Workd smoothly and was quick dont forget to hit the thanks button
This is doing my head in to the point I have borrowed a new HTC Sensation only to find the problem exists on this phone also.
When using the Camera App If I hit the power button the screen turns off. I am then unable to switch the screen back on - It appears the phone crashes.
Behaviour some times differs depending whether I have taken a photo or not.
The following behaviour is observed:
The lights stay illuminate on the soft keys at the bottom of the screen.
The phone can receive calls how ever it doesn't ring and I unable to answer them.
This problem is confirmed on 2 seperate devices which have been flashed with:
Android Revolution HD 3.6.12
10.58.9035.00U_10.15.9035.02_2 radio
I have also run super wipe on the phone before installing the HD Rom.
Please help!?
Ive also had this problem on a few diffrent roms.
But i flashed amaze camara update, and not had any prob since.
Im now running the latest ICS with sense, with what ever camara software came with the rom. And not had any problem
big_sw2000 said:
Ive also had this problem on a few diffrent roms.
But i flashed amaze camara update, and not had any prob since.
Im now running the latest ICS with sense, with what ever camara software came with the rom. And not had any problem
Click to expand...
Click to collapse
Cheers moved to ICS and its now fixed.
edwardblum said:
Cheers moved to ICS and its now fixed.
Click to expand...
Click to collapse
Having the same issues on both mine and my wives phones, both running AR 3.6.11 along with lag and other issues! Pretty fed up - and considering a different ROM. How is the ICS ROM, any issues like the 3.6.11? Is it hard to install?
I would try Elegancia ICS. Maybe a little pain to install, if you need to update your firmware.
http://forum.xda-developers.com/showthread.php?t=1429953
Firmware
http://forum.xda-developers.com/showthread.php?t=1432220
You may have to superCID if the firware dont work. Also easy todo
See post 4
http://forum.xda-developers.com/showthread.php?t=1192300
Have a read of the last 10 pages or so of the ICS thread for superCID info if your stuck, but it is easy.
I will give it a try! Do you just download the zip firmware and flash it?
It's not a rom problem, it is faux's kernel problem.
You can flash bricked kernel to solve.
banasik72 said:
I will give it a try! Do you just download the zip firmware and flash it?
Click to expand...
Click to collapse
Put the img zip directly on the SD card, not in any folder.
Boot the phone in to bootloader Power on volume down same time.
Just follow the instructions.
DO NOT POWER OFF REMOVE BATTERY ETC.
You will have to remove file from memory card before rebooting.
If you fail with the upload, then you will have to superCID
I've been using Embryo for quite awhile now and its been great! Unfortunately the only thing that does not seem to work on my phone is the power menu. I've reflashed Embryo 3.0, 3.1, 3.2, 4.0 to no avail. I've been trying to figure out as to why my power menu does not seem to work but i've come up to no conclusion...
Anyone know the source of my problem?
ur efs is corrupt, I almost guarantee it. See my sticky tread with the fixes in general section