Database Info

[Q] CM7 Root Fail

I am having some phone problems as a result of a root attempt.
Phone : LG p999
Carrier : Wind (Canada)
Here's what I did:
1. Tried superoneclick root program. It never got to completion and I couldn't figure out why. It always failed at right before finishing, even after reboots.
2. After superoneclick , I decided I would edit the adb shell manually. I did not initialize psneuter because that step was successful with Superoneclick. I loaded the superuser package. After this, I couldn't get the phone to boot, even in recovery mode.
3. Next I used One-Click ClockworkMod Recovery NvFlasher to load clockworkmod (cwm) . At first I loaded it onto internal SD. This worked fine but I couldn't get it to recognize any backups or cm7 nightlies.
4. Then I tried loading on the external SD. This worked, I couldn't see any backups but could load cm7 nightly and gapps.
5. Rebooted phone, everything fine. But within a few hours, my 3g was not working. I typed #*#*4636*#*# and saw the 3g settings were empty. Apn settings are normal though.
So here is where I'm at now. Wifi, SMS, calling all work. Cannot access 3G, sdcard (can’t take pictures).
Also, I didn't make a backup. Yea, that was stupid.

first thing were you on 2.2.2 or 2.3.3 when you first tried superoneclick? It sounds like you did the update and were on 2.3.3. The superoneclick methode does not work for rooting anymore. You have to nvflash CWM first. Then flash xboarders stock ota rooted or any Rom that is pre rooted I think will work.
So what I would do at this point is try using nvflash and flash back to stock and start over. You will probally have to reinstall CWM then I would just use the xboarders stock rooted ROM just to gain root then install CM7. You probally dont have to flash xboarders first but that is the way I know will definitly work so that is what I recomend. Also I dont know if the NVflash returns the phone to stock 2.2.2 or 2.3.3 I have never done it. maybe someone else who knows more could chime in.
Charlie

Are you already on Cyanogen Mod 7 as your title indicates? CM7 is rooted OOTB. There is no reason to try and root it again.

Yes it is running CM7 now, but with some serious problems:
1. Can't use one click to flash stock ROM -- each time I try the phone gets stuck in a rebooting loop and just eventually freezes.
2. 3G/sdcard problems with CM7
- not sure if this is just an issue with the CM7 build or whether my phone is causing this.
I have flashed CM7, but the weird thing is that the 3G works fine for about a day and then it cuts out. Its not an APN thing --> I checked the settings. Any ideas what is going on there?
Gonna try loading xboarders when I have a free evening.
Thanks

Proud new owner of a rooted G2X, but rusty with the recovery.

First off, thanks for stopping by to assist. Secondly, I just bought a used G2X off ebay and it came already rooted, with super user already installed. However, there's no rom on there and it's still running Froyo 2.2.2.
I haven't messed with rooting, recovery, or ROMs since my G1 so I'm quite rusty, leaving me with a few questions.
1. I know LG just released a Gingerbread update, yet I can't access it or any of the previous updates through the about phone update area. That's because I'm rooted right? I wouldn't mind just having stock 2.3.4 on here for now.
2. I don't know if the previous owner already put a custom recovery on here or not (not very talkative) so is there a way for me to check that? I was reading that if I boot into recovery without a custom one installed, the default recovery automatically starts wiping and reformating and I don't want that.
3. And just a general consensus question, coming from my horrible Samsung vibrant, GB roms are the way to go with this phone right, avoid the ICS?
Thank you in advance for all your help. Appreciations.

To check if you have a custom recovery power off phone and then boot into recovery mode via Power + volume down until you see 2nd LG logo, then release. The recovery type will be on top of the screen and bottom if I remember right. To update through Over The Air, I believe you need to be stock completely.
1. unroot, and most of what you need is here http://forum.xda-developers.com/showthread.php?t=1049154
2.That might be the case I'm not sure, I think completely factory resetting the phone is doable by holding power + volume down/up... Not completely sure as that is as far back as I can remember when the phone was 1st released a year ago. the least you can do is try if you plan on flashing a custom rom.
3. Personally I like CM7 based roms... or at the least 2.3.3 roms, that have been customized.
Overall this phone is cake walk compared to flashing the G1 with all the partitions and the gold card and what not...

That's what I was going to do, but then I read this:
To perform a master reset using the hardware keys, follow these steps:
Back up all necessary data. See: Prepare for a master reset and back up data on Android
Turn off the phone.
Press and hold the Power and Volume Down, key.
The phone will turn on and display the LG Logo
Wait 30 seconds and thephone will display the open box and arrow pointing towards the phone.
Release the keys, and the phone will reset back to the start up screen.
And so I'm catious about checking that right now because I don't want it to reset right now, kind of has used to use it right now.
I actually miss root, so I think I will stay rooted and check out one of these nice GB ROMS. Man, I have missed custom ROMS lol Now it's just a matter of deciding which is the best to use. So out of th eloop anymore on this stuff.
And yeah, the G1 was an adventure. Soft bricked it twice before.

Ummmm well either way if you do flash a custom rom, you are gonna need to wipe regardless. PM with any questions after you do some searching. All the links and questions you have should be out there already.
Sent from my LG-P999 using xda premium

Thank you for posting an intelligent thread. Basically if you don't want to wipe then you need to install cwm through nvflash, then create a backup. After that flash a rooted froyo rom. If you flash gb over froyo you will most likely have issues if you do not wipe properly. You can try it...but more then likely issues will arise.
Sent from my LG-P999 using xda premium

ICS roms are buggy and are awesome but if you dont want any problems GB shouldn't fail you. The first ROM I used were ICS but after months of not being able to record anything I had to try out GB and so far these roms are perfect. The ICS are still badass but I suggest you mess around with all of them though G2x has awesome devs.

I can confirm that if you hold the volume down and power until the second LG screen comes up you will factory reset the phone. I accidentally did it yesterday when I flashed the stock recovery back on the phone and wanted to check and see if it had worked. I'm a complete noob with flashing etc but like mt3g said all the info is here just look around for it.
Sent from my LG-P999 using XDA

2war said:
ICS roms are buggy and are awesome but if you dont want any problems GB shouldn't fail you. The first ROM I used were ICS but after months of not being able to record anything I had to try out GB and so far these roms are perfect. The ICS are still badass but I suggest you mess around with all of them though G2x has awesome devs.
Click to expand...
Click to collapse
You could have recorded videos by downloading an app called video cam illusion. It does the job.

I forgot about my own thread! lol But thanks for all the insight and help. Currently running into a mobile network/data drop issue so taking advantage and flashing a whole bunch of different roms. From MIUI to Kang Banger is like 2 opposite ends of the spectrum, but I love them both!

Help! boot loop

ok so i rooted a few weeks ago and downloaded the usual apps. super user titanium back up and clock work mod. tried to flash a rom with clock work mod and got the e:signature verification failure message. found a post for a kernal that made clock work mod actually work so i tried to flash a rom. zSimplyAOKPV5_Dark to be exact. now it sticks on boot screen. i have searched for hours and cannot find a way to fix my problem. its my first rooted android and first attempted rom flash and i botched it right off the rip. please help?

Depending on what you did beforehand, you have some options.
If you have backed everything up previously, just flash back to stock with one of the one-click stock roms in the Development section (they're in a sticky).
If you haven't backed everything up, try holding V+/V-/power until it reboots. If it doesn't take you to recovery, you can try to flash a kernel (most likely one that would match the version of android/rom you were running prior to this flash) and see if it lets you into recovery. You'll have to flash it with either Odin or Heimdall, after rebooting into download mode (power off, hold V+/V-, insert USB).
If that doesn't work, though, the stock flashing would probably be your best and/or only bet.

it wont allow me into recovery though i can get to download mode by pulling the battery and pressing just the volume +- and plugging in the usb. i was trying to flash an ics slim rom. thanks for your very speedy response.
i have now tried to flash a stock rom however it is not working from there even with the stock kernal. now it is hanging on the at&t screen.
ok i got it. seems the kernal i flashed to help cwd work properly was the culprit. now i dont know how im going to flash this ics rom im looking at without it.

phoenixfriend said:
it wont allow me into recovery though i can get to download mode by pulling the battery and pressing just the volume +- and plugging in the usb. i was trying to flash an ics slim rom. thanks for your very speedy response.
i have now tried to flash a stock rom however it is not working from there even with the stock kernal. now it is hanging on the at&t screen.
ok i got it. seems the kernal i flashed to help cwd work properly was the culprit. now i dont know how im going to flash this ics rom im looking at without it.
Click to expand...
Click to collapse
Flash corn kernel if you have stock gingerbread
Sent from my SGH-I897

The utility in my signature can help you flash the Corn Kernel so that you will have CWM.

I have corn kernal and odin 3 on the computer at home. Ill do that tonight. Any suggestions on a good stable rom for a noob? Preferably ics. I hated posting for fear of being flamed as a noob. My wife keeps making fun of me for it so I kinda have to get it done. I want to fix hers also. Its a great little phone it just seem a bit buggy to me. Very laggy. Thanks for all the help.
Sent from my SAMSUNG-SGH-I897 using XDA

Maybe start with a KK4 based rom such as Legend and then move up to ICS after that. I only say that because there is a bug in ICS that could render your internal SD unusable. It's rare, but when it happens you will not be happy.

Still unable to get corn kernal to flash. I've tried a few of your guys fixes but I'm gonna have to get some other updates to my computer first.
Sent from my SAMSUNG-SGH-I897 using XDA

[Q] Would Samsung fix my bricked phone?

I bricked my unlocked Captivate (bought on Amazon for $240 - I was avoiding a data plan) trying to get Ice Cream Sandwich on it. The phone was rooted.
Initially, the phone was only loading a Samsung splash screen when I tried to get it into normal mode. However, recovery mode was working; it would boot into Clockworkmod. Which is a bad thing considering they would easily tell I had messed with it!
So, I loaded the phone into Download mode and tried to flash the stock ROM using Odin. Odin said "failed" and now my phone was completely soft bricked, and the infamous "[phone]-----/!\-----[computer]" screen was showing up. Download mode worked though. I tried to flash all types of stock and custom ROMs to no avail. Now, recovery and normal modes don't work while Download mode does.
So, I called Samsung and told them it wasn't working; they told me it was still under warranty and I could send it in for repairs.
My question would be: will Samsung repair my phone, or will they find out I messed with it and refuse to do so? Also, if they find out, how much will I have to pay them to fix it?
Getting a new phone is out of the question... I might just buy

If there is an odin flash counter on download mode, they will figure it out if you have messed with it. If there's not, make a good story. Was it on 2.3.6 already when you bought it?

If you can get into download your not bricked. The screen you see is kernel panic. You will have to flash a proper kernel to get it to boot back up.
Sent for a corner cell in Arkham

Yeah, you can still fix it. No need it to bring to samsung

Has anyone sent a bricked phone in to Samsung before?
I tried flashing stock Captivate Gingerbread kernels to no avail. I googled and googled, and I tried everything I found. Including Odin and heimdall.
It was running Gingerbread 2.3.5 when I updated it myself to Ice Cream Sandwich 4.0.3. It was running beautifully. Then I tried to recover my backed-up data, which worked, but then I tried to reboot the phone and it wouldn't boot.
And no, I don't remember seeing any "flash counter." Would they still be able to tell?
Has anyone sent a bricked phone in to Samsung before? If so, what were the results?
Also, how much do you think Samsung would charge me to fix it if they found out and voided the warranty? Hopefully less than $50? And they would charge me for shipping too, right?

random_person1308 said:
I tried flashing stock Captivate Gingerbread kernels to no avail. I googled and googled, and I tried everything I found. Including Odin and heimdall.
It was running Gingerbread 2.3.5 when I updated it myself to Ice Cream Sandwich 4.0.3. It was running beautifully. Then I tried to recover my backed-up data, which worked, but then I tried to reboot the phone and it wouldn't boot.
And no, I don't remember seeing any "flash counter." Would they still be able to tell?
Has anyone sent a bricked phone in to Samsung before? If so, what were the results?
Also, how much do you think Samsung would charge me to fix it if they found out and voided the warranty? Hopefully less than $50? And they would charge me for shipping too, right?
Click to expand...
Click to collapse
You recovered your apps thru TB? If yes, Didn't you read that you're not supposed to restore apps from titanium from GB to ICS? Might cause problem like this. No flash counter, they're not gonna notice this. Have you tried flashing again stock GB rom?(not just a kernel but a rom) And when you flashed that GB kernel, was that after you flash an ICS rom? Remember, when you're on ICS, you must use ICS kernel and not GB kernel. If it didnt work Just make a good story! Tell them you updated it through kies and updating was interrupted. Im pretty sure 2.3.6 is out on captivate. If they tell you its your fault for updating it, ask them why did they put update on kies when you can't even use it. Plus, they didn't warn you not to update it.

cessprin00 said:
You recovered your apps thru TB? If yes, Didn't you read that you're not supposed to restore apps from titanium from GB to ICS? Might cause problem like this. No flash counter, they're not gonna notice this. Have you tried flashing again stock GB rom?(not just a kernel but a rom) And when you flashed that GB kernel, was that after you flash an ICS rom? Remember, when you're on ICS, you must use ICS kernel and not GB kernel. If it didnt work Just make a good story! Tell them you updated it through kies and updating was interrupted. Im pretty sure 2.3.6 is out on captivate. If they tell you its your fault for updating it, ask them why did they put update on kies when you can't even use it. Plus, they didn't warn you not to update it.
Click to expand...
Click to collapse
No, I used Clockworkmod to recover data. It worked, and then I hit "reboot system now," and the phone wouldn't boot.
I already shipped the phone off, but thanks for the help, I really appreciate it! If Samsung doesn't fix it I know what to do now!

Ok, so I've been doing some research over the past few weeks and I figured out what I did wrong. I inadvertently tried doing a Nandroid restore (i.e. - restoring the whole system) instead of just apps. And I didn't wipe data first. That's why it was failing to boot. Why I couldn't flash the stock kernel from Odin; I have no idea.
As for the phone; Samsung fixed it free of charge (all they had to do was a reset...) and sent it back to me.
After getting it back, I rooted and installed Clockworkmod recovery using Corn kernel version 7.05. Geeve420 has an excellent guide over on androidforums.com. Then I flashed Cyanogenmod9 RC2, then Slim ICS version 4.2. It's running smoothly, though in 24 hours I have had 1 freeze (I did a battery pull and restarted) and a few force closes.
I also installed that Google Now app (the thread on XDA is called "The Google Now for ICS Project"). In other words, I went from being a complete n00b to getting JellyBean software on my phone! All I did was follow the directions, step-by-step, and it worked.
Thanks to all who helped!

random_person1308 said:
Ok, so I've been doing some research over the past few weeks and I figured out what I did wrong. I inadvertently tried doing a Nandroid restore (i.e. - restoring the whole system) instead of just apps. And I didn't wipe data first. That's why it was failing to boot. Why I couldn't flash the stock kernel from Odin; I have no idea.
As for the phone; Samsung fixed it free of charge (all they had to do was a reset...) and sent it back to me.
After getting it back, I rooted and installed Clockworkmod recovery using Corn kernel version 7.05. Geeve420 has an excellent guide over on androidforums.com. Then I flashed Cyanogenmod9 RC2, then Slim ICS version 4.2. It's running smoothly, though in 24 hours I have had 1 freeze (I did a battery pull and restarted) and a few force closes.
I also installed that Google Now app (the thread on XDA is called "The Google Now for ICS Project"). In other words, I went from being a complete n00b to getting JellyBean software on my phone! All I did was follow the directions, step-by-step, and it worked.
Thanks to all who helped!
Click to expand...
Click to collapse
Good for you then Try not to mess with it again. Haha. Do a lot of reading if you're a little hesistant. Plus, asking before doing so is not problem. We have a lot of helpful xda members here to guide you. Goodluck!

[Q] Help i'm a noob and need help please!

Hello I rooted my i997r infuse rogers but the com# in oden was in the wrong box and it saied succesful /failed one but I didn't think much of it I was so exited that it worked I upgraded from 2.3.3 to 2.3.6 AT&T firmware thinking i have to in order to install ics I then installed cms 10 J.B 4.3 my phones runs great better than ever before execpt for the fact that my screen takes about one minute to turn on with lines I think its called rainbowing im not sure I think it has something to do with my original root that messed up my screen so I want to downgrade to stock using odin and reinstall and hopefully my screen won't be messed up so I used http://forum.xda-developers.com/showthread.php?t=1193927 it was successful I used the Odin_UXKG3_rooted_no_bootloaders_v2.zip then Odin_Stock_Rogers_UXKG3_Kernel.zip and my screen now has a shade of gray with this shade of blue this blue shade that covers the screen right when I turn it on it keeps getting worse it goes away after a couple minutes in recovery mode but now I just don't know what to do I can't even use my phone now help me please! How do I fix my video driver I guess this is whats going on help I can't seem to find a working link for CWM-UXKG3-rooted-de-odexed-update-v2.zip maybe if I install the cwm the light neon blue screen will go away?

crayzze said:
Hello I rooted my i997r infuse rogers but the com# in oden was in the wrong box and it saied succesful /failed one but I didn't think much of it I was so exited that it worked I upgraded from 2.3.3 to 2.3.6 AT&T firmware thinking i have to in order to install ics I then installed cms 10 J.B 4.3 my phones runs great better than ever before execpt for the fact that my screen takes about one minute to turn on with lines I think its called rainbowing im not sure I think it has something to do with my original root that messed up my screen so I want to downgrade to stock using odin and reinstall and hopefully my screen won't be messed up so I used http://forum.xda-developers.com/showthread.php?t=1193927 it was successful I used the Odin_UXKG3_rooted_no_bootloaders_v2.zip then Odin_Stock_Rogers_UXKG3_Kernel.zip and my screen now has a shade of gray with this shade of blue this blue shade that covers the screen right when I turn it on it keeps getting worse it goes away after a couple minutes in recovery mode but now I just don't know what to do I can't even use my phone now help me please! How do I fix my video driver I guess this is whats going on help
Click to expand...
Click to collapse
Read this:
http://forum.xda-developers.com/showthread.php?t=1613523

Thanks I read the part about the bootloaders I flashed to gb 2.3.6 and then flashed the bootloaders hoping it would fix the blue screen i always get and have to wait 5 minutes to go away every time turn m screen on it just isin't when I power my phone on its whenever I turn my screen on I can't see anything when someone calls me I have to wait, im on a rogers infuse and I hope this isn't a permanent bug. I went back to 2.3.3 gb stock I don't have a rogers boot logo anymore but it runs fine execpt for this light neon blue that covers the screen does anyone else ever have this problem please help.

crayzze said:
Thanks I read the part about the bootloaders I flashed to gb 2.3.6 and then flashed the bootloaders hoping it would fix the blue screen i always get and have to wait 5 minutes to go away every time turn m screen on it just isin't when I power my phone on its whenever I turn my screen on I can't see anything when someone calls me I have to wait, im on a rogers infuse and I hope this isn't a permanent bug. I went back to 2.3.3 gb stock I don't have a rogers boot logo anymore but it runs fine execpt for this light neon blue that covers the screen does anyone else ever have this problem please help.
Click to expand...
Click to collapse
rainbow screen on recovery = no gb bootloaders
blue screen on phone ...maybe bad cable connection or corrosion at contact
you might have to open it and check the connections

Working and tested CWM 1.2 ghz
Phase 1:
---------
To obtain CWM head over too Jscotts odin url.
1. download the file which includes root access.
"Stock UCLB3 with root
UCLB3_Unbrick_root_1.1.zip"
2. you will also need Samsung Kies, which will install the usb driver for your Samsung galaxy. The link is on the website.
3. Place your phone into Download mode
To do this, have your usb cable for your phone plugged into the computer but disconnected from your phone. shut off your phone. When the power is off press Volume up and Volume down simultaneously, after the buttons are pressed plug in the usb cable at the same time, which should be connected to the computer.
This will place the phone in Download mode.
4. open the included Odin.exe, when you see the yellow bar under ID:COM then everything is good.
Follow the rest of the instructions on jscotts website.
Finally when this procces is done, reboot into android.
Phase 2:
---------
1) Download SGS kernel flasher
2) Click on the link on jscotts website to download a stock kernel which contains CWM. use "2013.04.30-CWM-Synthesis-1.2Ghz.zip in the following link:
forum.xda-developers.com/showthread.php?p=25724638
You now have a working GB cwm and next is follow Enthropy's CM9 guide for your first ROM!

Fullmetal Jun said:
Phase 1:
---------
To obtain CWM head over too Jscotts odin url.
1. download the file which includes root access.
"Stock UCLB3 with root
UCLB3_Unbrick_root_1.1.zip"
2. you will also need Samsung Kies, which will install the usb driver for your Samsung galaxy. The link is on the website.
3. Place your phone into Download mode
To do this, have your usb cable for your phone plugged into the computer but disconnected from your phone. shut off your phone. When the power is off press Volume up and Volume down simultaneously, after the buttons are pressed plug in the usb cable at the same time, which should be connected to the computer.
This will place the phone in Download mode.
4. open the included Odin.exe, when you see the yellow bar under ID:COM then everything is good.
Follow the rest of the instructions on jscotts website.
Finally when this procces is done, reboot into android.
Phase 2:
---------
1) Download SGS kernel flasher
2) Click on the link on jscotts website to download a stock kernel which contains CWM. use "2013.04.30-CWM-Synthesis-1.2Ghz.zip in the following link:
forum.xda-developers.com/showthread.php?p=25724638
You now have a working GB cwm and next is follow Enthropy's CM9 guide for your first ROM!
Click to expand...
Click to collapse
Thank you but it's not bricked... are you suggesting this will take away the screen issue?... k so it's been a while since I used my infuse the screen was getting so annoying that I put it away for a month last night I turned it on and the screen seemed fine, I was very pleasantly surprised I re rooted it and put on the new cm10 jellybean and noticed the longer I kept using the screen the more the lines/screen problem came back I left it untouched overnight after modding it and this morning it's fine again until continued use of the screen... I have taken it apart and unplugged all the screen plugs reattached looked around everything seemed fine so I dunno... I have a really newbie question for the way I went about getting to jellybean from stock... first I rooted it with Odin_Infused_Gingerbread_Kernel_v1 and noticed that cwm was installed so is this all I need to proceed with installing ics? because I kept thinking I needed to install 2.3.6 and that is not firmware meant for my phone and thats what I think might be the cause of my screen issue sooo do I just need to root it first then go straight to ics or do I need to put 2.3.6 then ics?
I am on a rogers infuse.

crayzze said:
Thank you but it's not bricked... are you suggesting this will take away the screen issue?... k so it's been a while since I used my infuse the screen was getting so annoying that I put it away for a month last night I turned it on and the screen seemed fine, I was very pleasantly surprised I re rooted it and put on the new cm10 jellybean and noticed the longer I kept using the screen the more the lines/screen problem came back I left it untouched overnight after modding it and this morning it's fine again until continued use of the screen... I have taken it apart and unplugged all the screen plugs reattached looked around everything seemed fine so I dunno... I have a really newbie question for the way I went about getting to jellybean from stock... first I rooted it with Odin_Infused_Gingerbread_Kernel_v1 and noticed that cwm was installed so is this all I need to proceed with installing ics? because I kept thinking I needed to install 2.3.6 and that is not firmware meant for my phone and thats what I think might be the cause of my screen issue sooo do I just need to root it first then go straight to ics or do I need to put 2.3.6 then ics?
I am on a rogers infuse.
Click to expand...
Click to collapse
Re-reading your thread, I realized that you have a i997R - Roger's. These come stock GB 2.3.4 - unlike the i997-ATT that started with 2.2.1
The difference is that the i997R has already built in bootloaders from the start. That means that Roger's phone do not get the distorted recovery with flashing we termed as "rainbow." The rainbow is fixed with a bootloader flash. Roger's phone do not need this step.
I think the color distortion you are seeing could be due to a heating issue, the screen or the graphics chip. More likely than not, this may be hardware related.
If you have opened and cleaned out the connections and such, and have not noted any difference, then the problem may be deeper situated. Further testing may require another Infuse and swapping out parts to see where the issue lies.
gl

Help!
qkster said:
Re-reading your thread, I realized that you have a i997R - Roger's. These come stock GB 2.3.4 - unlike the i997-ATT that started with 2.2.1
The difference is that the i997R has already built in bootloaders from the start. That means that Roger's phone do not get the distorted recovery with flashing we termed as "rainbow." The rainbow is fixed with a bootloader flash. Roger's phone do not need this step.
I think the color distortion you are seeing could be due to a heating issue, the screen or the graphics chip. More likely than not, this may be hardware related.
If you have opened and cleaned out the connections and such, and have not noted any difference, then the problem may be deeper situated. Further testing may require another Infuse and swapping out parts to see where the issue lies.
gl
Click to expand...
Click to collapse
Yes I bootloader flashed it in desperation with an at&t bootloader and now lost the rogers bootloader lol... My phone came stock 2.3.3 gb and I desperatly wanted gb 2.3.6 so I rooted it and did so, then after discovering ics and then after jb... I believe that installing 2.3.6 might have damaged the hardware being that its only ment for at&t i997's or possibly a combination of 2.3.6 and then installing ics then jb or whatever the case may be my screen needs 1 to 5 minutes to fully appear... my question is if I ever happen to root another rogers i997 do I need to upgrade to 2.3.6 before installing ics or can I install right after root? Because I also might re root the phone back to stock and root it then install the newer version of ics then jb cm 10.2... I am currently running on jb cm 10.2 do you think it would make a difference if I rerooted to stock then install newer ics then jb with upgrading to 2.3.6 for at&t phones??? Thank you.

crayzze said:
Yes I bootloader flashed it in desperation with an at&t bootloader and now lost the rogers bootloader lol...
Click to expand...
Click to collapse
no big deal..same phone..same hardware..different version of firmware..it's the APN for providers that makes the difference
crayzze said:
My phone came stock 2.3.3 gb and I desperatly wanted gb 2.3.6 so I rooted it and did so, then after discovering ics and then after jb... I believe that installing 2.3.6 might have damaged the hardware being that its only ment for at&t i997's or possibly a combination of 2.3.6 and then installing ics then jb or whatever the case may be my screen needs 1 to 5 minutes to fully appear.
Click to expand...
Click to collapse
yes..you are right. Rogers came with 2.3.3 not 2.3.4 as I previously stated.
the earlier versions of gb came with Carrier IQ that track users. It was taken out later.
I doubt Installing 2.3.6 or ICS or JB will cause any prob with the phone. I suspect your phone may have some hardware issues.
After the first flash, the os (esp ICS or JB) may need time to build cache and dalvik..sometimes it may take a few minutes. Blue or distorted screen, however, is not typical from my experience.
crayzze said:
my question is if I ever happen to root another rogers i997 do I need to upgrade to 2.3.6 before installing ics or can I install right after root? Because I also might re root the phone back to stock and root it then install the newer version of ics then jb cm 10.2... I am currently running on jb cm 10.2 do you think it would make a difference if I rerooted to stock then install newer ics then jb with upgrading to 2.3.6 for at&t phones??? Thank you.
Click to expand...
Click to collapse
IMO, it doesn't matter how you get to CM10.2. Rooting is just one method. The idea is to get insecure recovery...ie..cwm.
from stock rom, you can odin or heimdall a custom kernel without rooting. boot into recovery and flash what you want.
it doesn't matter if its rogers or att. same phone..same hardware. years ago, it only mattered when a user had to return or exchange the phone for warranty...after the warranty period ended..it's not a big deal.
flash away at any method you want. it doesn't make any difference in my mind. get some practice..the infuse has many restore methods via odin or heimdall
rooting gives one access to the root directory
insecure kernel or custom recovery allows one to flash firmware without manufacturer signature