Database Info

Treo Pro - CDMA - ROMs, Instructions, Tips & Tricks

Treo Pro on CDMA networks - ROMs, Instructions, Tips & Tricks

Flashing...
[size=+1]Instructions:
First, if you have GSM treo pro (NOT CDMA, NOT SPRINT/VERIZON/TELUS), this is not intended for your device. see this post on GSM treo pro's current status: http://forum.ppcgeeks.com/showpost.p...7&postcount=55
steps:
0) if you have Vista or Windows 7, make sure you have latest WMDC.
1) download Hard-SPL package from attachment, extract to an empty local folder.
2) you must Have Phone Synced with PC in Windows Mobile!
3) run PANTHER_CDMA_HSPL exe from the folder
4) follow steps in the program!
5) it should go to tricolour screen now, i.e. SSPL mode, and show 0.32.SSPL. now follow steps in the RUU that's launched by now.
6) SPL flashes, device automatically reboots, job done. if you get any errors, follow the instructions offered by the program.
7) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 0.36.CMONEX.
NOTE: you will not see the SPL version during normal boot!
to enter bootloader mode to see version: with the device turned on, press and hold the Camera button along with the Power button, then press the reset button with the stylus tip, then release the Camera and Power buttons when bootloader tricolour screen appears.
NOTE 2: anyone having problems with the device entering SSPL automatically or problems with USB connection after SSPL was loaded, please copy SSPL-Manual-PantherCDMA.exe from the SSPLManual.zip attachment to the device and run it. then once the screen is in SSPL, run RUU manually. i.e. you run the RUU on the PC, if it isn't obvious.
NOTE 3: this is unsigned Hard-SPL. no limitations on flashing ROMs. also, this has overwrite protection, if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package will soon be posted.
NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the HardSPL.
Finally, if you wish to thank me with a donation, you can do so by clicking the link the HardSPL program offers, or here: http://hpcmonex.net/htc/pantc/panther.htm
Troubleshooting tips:
- READ THE INSTRUCTIONS
- READ THE INSTRUCTIONS
- READ THE INSTRUCTIONS
- if you have USB issues:
1. anyone having problems with the device entering SSPL automatically or problems with USB connection after SSPL was loaded, please copy SSPL-Manual-PantherCDMA.exe from the SSPLManual.zip attachment to the device and run it (make sure USB is plugged in). then once the screen is in SSPL, run RUU manually. i.e. you run the RUU on the PC, if it isn't obvious.
2. if it still has connection error in SSPL screen, try unplugging and replugging the USB
3. try different USB port, PC, etc.
4. when there are sync issues, the program also suggests installing this file on the phone: http://hpcmonex.net/roms/enablerapinew.cab, just making a note here too.
5. it's been verified that you can flash HardSPL from SD in SSPL, see instructions below.
Updates:
HardSPL NBH file is now downloadable from 1st post! you can flash this from SD now; rename this NBH to PANTIMG.NBH, put it on a fat32 formatted SD, and then run SSPL-Manual-PantherCDMA.exe on the phone.
steps for stock SPL restore:
0. only use this for warranty service! for no other purpose!!! also before flashing this, make sure you already have stock ROM flashed.
1. download Stock_SPL_Restore_036.zip attachment from 1st post, extract it.
2. get customRUU and flash this file. can also do SD flash (PANTIMG.NBH).[/size]

ROMs - CDMA
BigE Rom 23518 v 1.0 - SPRINT
BigE Rom 23511 v 1.2 - SPRINT
CFAY Treo Pro 6.5 Rom - SPRINT

Reserved 3
This is reserved for future use...

Reserved 4
This is reserved for future use...

Reserved 5
This is reserved for future use...

Sprint Treo Pro on Boost Mobile. Will the stock roms also be posted in this thread?

Video Drivers?
Any video drivers like on the touch pro ?

link death, please upload thanks

Stick the list; to get fixed up!

Thx for ROM....
BR

Mio A702 ELL WM6 OS 5.2.1238 Build 17745.0.2.3, by ansar

Dear forum members,
These instructions are for upgrading your Mio A702 Rom.
The provided Rom image is the official ELL WM 6.0 OS 5.2.1238 Build 17745.0.2.3 version.
Keep this rom image in order to flash it when sending the device for service.
- The MS_IPL, Uboot, XIP, OS and SYS are the original Mio A702 factory Rom Version R39.5.112
- Before flashing make a backup of your files.
A. Download Link
The official version: Mio_A702_ELL_WM_6.0_OS_5.2.1238_Build_17745.0.2.3_by_ansar.zip
Rapidshare: http://rapidshare.com/files/379638989/Mio_A702_ELL_WM6_OS_5.2.1238_Build_17745.0.2.3_by_ansar.zip
B. Instructions to successfully flash the rom image
Unzip the downloaded file Mio_A702_ELL_WM6_OS_5.2.1238_Build_17745.0.2.3_by_ansar.zip and you will have:
- USB driver folder
- ChiSync33.exe file
- Mio_A702_ELL_WM6_OS_5.2.1238_Build_17745.0.2.3_by_ansar.bin and
- Mio_A702_Rom_Upgrade_Guide.txt file
Rom Flashing Guide Lines:
1. Make sure that Mio A702 can be connected and synchronized with your PC / Laptop.
2. Turn on the device while holding up the side joystick.
In case the device was on, hold up the joystick and press the Reset button.
In both cases you enter to USB update mode.
3. If you do not have already installed the USB drivers, it is time to do so.
USB drivers are in the download folder with this name.
4. After USB driver installation run ChiSync33.exe.
5. Tap on Image tab to browse for the downloaded file: Mio_A702_ELL_WM6_OS_5.2.1238_Build_17745.0.2.3_by_ansar.bin
6. By pressing Info tab you can see this file info.
7. Tap on Update to start rom image flashing.
8. You can disconnect only when the message of checksum is displayed and ChiSync33.exe is showing the stop sign.
8. Wait for the process to finish and your device to boot.
Till next version enjoy!!
Regards, ansar
_________________
Mio A702 tnx to Elen
CE image WM6.0 OS 5.2.1238 Build 17745.0.2.3 ELL official

Is this english ROM??

[NoDo ROM]Spark_Vodafone_ELL_1.20.401.00_Radio_5.54.09.21_22 .33b.50.10_NoDo by ansar

Dear forum members,
In the following A, B, C and D sections is described the flashing process
of the NoDo unbranded ROM: RUU_Spark_Vodafone_ELL_1.20.401.00_Radio_5.54.09.21_22.33b.50.10U_NoDo
A. Pre-Requisites
If your Tropy 7 is flashed with a ROM of the following releases:
1. RUU_Spark_Vodafone_ELL_1.10.168.04_Radio_5.52.09.16_22.33a.50.10U
2. RUU_Spark_Vodafone_ELL_1.10.168.05_Radio_5.52.09.16_22.33a.50.10U
then you can flash the following NoDo unbranded ROM and when you like you can comeback to your previous ROM
In case your Tropy 7 is flashed with a different of the above 1, 2 ROMs but your Firmware version at your phone settings>about>more information
is of the form xxxx.yy.zzzzz.168 i.e. with characteristic value 168
then you can also flash the following NoDo unbranded ROM, but you can comeback only to one of the above 1, 2 ROMs
B. Downloading
You must download the following 2 ROMs:
1. Download this zip ROM file: RUU_Spark_Vodafone_ELL_1.20.401.00_Radio_5.54.09.21_22.33b.50.10U_NoDo_by_ansar
2. Download this zip ROM file: RUU_Spark_Vodafone_ELL_1.20.401.00_Radio_5.54.09.21_22.33b.50.10U_NoDo_Signed_by_ansar
Extract the downloaded zip ROM files with an unzip / 7zip utility in separate folders of your choice
C. Flashing Process
In order to successfully flash the provided ROMs you must follow these steps:
1. Flash the ROM of the above (B.1.) extracted zip ROM file
2. After flashing Tropy 7 will automatically enter again in bootloader mode
3. In the screen of your computer the ROMUpdateUtility will report an ERROR
4. Ignore it and exit from ROMUpdateUtility
5. Now flash the ROM of the above (B.2.) extracted zip ROM file
6. After flashing your Tropy 7 will boot normally
7. Exit from ROMUpdateUtility and proceed with your brand new ROM
If you do not want them you can delete all operator apps, in order to have more free RAM
Beware, in WP7 deleting an application means it is deleted from ROM
D. ROM Flashing Instructions
In order to flash a ROM follow these steps:
1. Press and hold power-on/off button to power-off the phone
2. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
3. When your phone enters the tricolor screen bootloader mode, release volume-down button
4. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
5. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
6. After completion of (D.5.) above, check the usb message connection on your phone screen
7. To flash the ROM go to your pc/laptop folder where the downloaded zip ROM file is extracted
8. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
Till next version enjoy!!!
Regards, ansar

Hi,
Please explain what language is ( _ELL_ ).
Thank you.

It is Greek Language

ELL Means Greek language..
But this is NO greek language ROM...There is no Greek language yet for WP7
Its the English Lang ROM from Vodafone GR

Also no Greek keyboard right? What is the difference from Vodafone GR stock rom that has already been updated via zune?

socratesx said:
also no greek keyboard right? What is the difference from vodafone gr stock rom that has already been updated via zune?
Click to expand...
Click to collapse
καμια διαφορα το ιδιο ειναι,και εγω που την εβαλα δεν ειδα διαφορα

Hi,
This is addressed to those their phones are branded to Vodafone_ELL operator
After flashing you have the HTC_Europe version installed
Regards, ansar

[Q] flashing MAGLDR onto a htc hd2

Guys, Help, I get to No 3 of the instructions listed below, the box disapears and nothing else happens, I have downloaded from the links from here http://forum.xda-developers.com/showthread.php?t=893948, from these links
3. Download MAGLDR 1.13 package from *HERE* and extract to an empty folder on your pc
4. Download a NAND Android ROM from *THIS* Forum and extract to an empty folder on your pc any tips on how to over come the problem, keep the suggestions simple please
I've followed the instructions, but keep failing at No3 ....
Please help, lol, and keep it simple lol
1. FLASH MAGLDR TO YOUR DEVICE
The Original MAGLDR Thread by Cotulla is *HERE*
NOTE1: LEO512 and LEO1024 are both supported
NOTE2: MAGLDR doesn't replace OSPL/HSPL. It runs in the chain after. So it's safe to install and remove it
NOTE3: You can flash between 1.11, 1.12 and 1.13 versions on Magldr without losing your NAND Rom
1. Synch Phone with PC in Windows Mobile!!! It has to be connected to activesync or WMDC via USB cable
NOTE: As an alternative method to activesync you can restart your phone in Bootloader Mode, then connect the usb cable and wait until 'usb' appears in the bottom half of your phones screen
2. Browse to the folder you extracted your Magldr Package files to on your pc, right click on ROMUpdateUtility.exe and select Run as Administrator
3. Tick the box to confirm you are aware of the risks and select 'Next'
4. Tick the box to confirm you have followed the preperation steps and select 'Next'
* The program will now check the usb connection *
5. Select 'Update'
6. Verify the image you will flash (it should say 2.00.000.0) and Select 'Next'
7. Read the process list and Select 'Next'
8. Your phone will enter BootLoader Mode and the progress will goto 100%
9. Your phone will now Reboot. Congrats, you just flashed MAGLDR.
NOTE: To Enter MAGLDR Menu Screen after installation, Long Hold the Power Button when resetting the phone and the menu will appear

[Guide] Flash stock firmware ( rom ) to Nokia 7 plus ( TA-1046 )

Warning :- I am not responsible for any kind of your device damage like soft or
hard brick . DO IT OWN YOUR RISK
Pre- requirements ?
1. Bootloader unlocked
2. Pc / laptop with windows operating system
3. Patience
Tool required
1. OST 6.0.4
https://drive.google.com/open?id=1n91aYT9Di6_v4F3Wjlv8TjfeLc64AcYA
2. Notepad ++
https://notepad-plus-plus.org/download/v7.6.6.html
3. Winrar
https://www.rarlab.com/download.htm
4. Platform tool
https://developer.android.com/studio/releases/platform-tools
5. Nokia driver
https://github.com/StollD/nokia-driver-installer/raw/master/out/Phone_Nokia_USB_Driver_v1.4.0.exe
6. nb0 unpaker
https://forum.xda-developers.com/android/general/nb0-unpacker-packer-tool-t3699464
7. Firmware file ( Oreo 8.1 )
https://fih-firmware.hikaricalyx.com/hmd_en.html#b2n
Steps of flashing
1. Download all files from the link given
2. Extract the file B2N...... .nb0.7z/zip using
winrar
3. Then extract B2N.... .nb0 file using nb0
unpacker
4. Find .mlf file in extracted files and edit in Notepad as the value given below ?
INITOPTION = 0x20000
INITDLTYPE = 0x60
SECURITY_VER = 0x0001
And save the file
5. Run ost tool on your pc/ laptop
6. Select .mlf file on ost tool
7. Reboot your device to download mode
and connect to PC/laptop
8. Flash and wait for boot up
Note :- The process will take time
For other processes follow other guide???

Purak6 said:
Warning :- I am not responsible for any kind of your device damage like soft or
hard brick . DO IT OWN YOUR RISK
Pre- requirements
1. Bootloader unlocked
Note :- The process will take time
For other processes follow other guide
Click to expand...
Click to collapse
any method for locked devices with Developer Preview 4 running

AlahmadPR said:
any method for locked devices with Developer Preview 4 running
Click to expand...
Click to collapse
You can flash latest rom ( march full rom zip pie )

Dear users, I have a Nokia 7 plus updated to the latest fw (android 10 I guess). Because of full memory or because something else the OS doesn't start. It appears a mini recovery where It's written "impossible load the android system. Your data could be damaged.....and so on.... I have just two options:
1) Retry (obviously this option doesn't work)
2) Restore factory settings
I've some data important data inside the phone and I'd like to recover them.
Unfortunately I've never modified the recovery so I guess I've also a locked bootloader, so the TWRP isn't an option. I was thinking about download the original FW and to reinstall it Via ADB. Usually I used this method with samsung through ODIN and often it worked.
Could it works for your opinions?
Thanks for your help,
waiting for your response