Related
I used my Nexus S without a screen protector, and there was one day when I was using the phone heavily, this part of the screen felt a little rough to the touch when I was swiping it.
Now when I look at the screen I see these faint track marks on the screen that aren't scratches, but it's like something smudged the screen. I have wiped it with microfibre cloth (My Oakleys pouch) but I can't remove this smudge.
It's barely visible when the screen is on but you can see it if the screen is off.
Does anybody else have this problem? Is it a scratch or can I wash this off somehow?
I have similar spots... it's most likely the oleophobic coating wore off in that area. Not sure how it happens, but it seems to be ****ty coating.
Kayatoast said:
I used my Nexus S without a screen protector, and there was one day when I was using the phone heavily, this part of the screen felt a little rough to the touch when I was swiping it.
Now when I look at the screen I see these faint track marks on the screen that aren't scratches, but it's like something smudged the screen. I have wiped it with microfibre cloth (My Oakleys pouch) but I can't remove this smudge.
It's barely visible when the screen is on but you can see it if the screen is off.
Does anybody else have this problem? Is it a scratch or can I wash this off somehow?
Click to expand...
Click to collapse
dinan said:
I have similar spots... it's most likely the oleophobic coating wore off in that area. Not sure how it happens, but it seems to be ****ty coating.
Click to expand...
Click to collapse
I also have one such small spot that is only visible when the screen is off, and only visible at a certain angle with a lot of light. It's been there since I got the phone. It actually looks like it's under the glass, but I can't tell for sure. I can't feel it. I've been keeping an eye on it and I'll utilize Best Buy's protection plan if it gets worse. Im glad I'm not the only one, but this is a little disappointing.
It's problably the oleophobic coating like others said. I have the same thing on mine, and have been thinking of exchanging it because of it. But I think I might as well keep it, as this phone has no other problems, and I'm sure it will probably wear off any phone I get with due time.
Take a paper towel and lightly go over that area. I bet it comes clean so you can't see it anymore until you wipe your oily fingers in that spot again. It seems oils like to get stuck in those spots unless you clean it with something that absorbs oils, and isn't reused over and over.
Thanks for the replies guys. Yeah I am hesitant to do a return as my phone works great with none of the issues faced by others.
I'll try cleaning it as suggested. Thanks!
Sent from my Nexus S using Tapatalk
I had the smudges that Kayatoast talked about. I just wiped it off with a paper towel and it disappeared. I guess we must clean it with something that absorbs oil.
My smudges probably came from the hand lotion...
I've also decided not to return mine because I don't want to get a replacement phone with a worse problem.
As for wiping it off, this may work for others in some situations, but the spot on mine is definitely a blemish/defect. Cleaning it has zero effect.
I used iklear to clean the screen then wiped it down with a microfibre cloth. That took care of the smudge. Then I slapped a screen protector on it and that took care of the smudge..now to get rid of those air bubbles..lol.
I recommend this brand: http://www.protectionfilms24.com/pr...geraeteklasse=7&marke=Samsung&modell=4603&go=
Arrived in 2 days, made by 3M and doesn't affect my screen clarity at all.
I just realized the same type of smudge on mine today. It's not on top of the screen, but seems like it's under it. Like others, I didn't want to exchange it because everything else works fine plus I'm out of my 30 day period with no exchange.
If I remember, I'm probably going to do a warranty exchange before it ends.
When I was cleaning my screen to put on my cheap eBay screen protector, I noticed the same smudge in the middle of my screen. No amount of cleaning removed it completely. On went the screen protector, and "Voila", smudge disappeared .
BTW, the eBay screen protector is very close to screen feel as the naked screen and is completely clear. Free with the $3.99 shipped silicone case... gotta love eBay!!!
treodoc said:
When I was cleaning my screen to put on my cheap eBay screen protector, I noticed the same smudge in the middle of my screen. No amount of cleaning removed it completely. On went the screen protector, and "Voila", smudge disappeared .
BTW, the eBay screen protector is very close to screen feel as the naked screen and is completely clear. Free with the $3.99 shipped silicone case... gotta love eBay!!!
Click to expand...
Click to collapse
You know, I thought this was a joke until I got the cheap screen protectors that came with the S gel case. Yeah, it disappears. Weird since it looked like the smudge was under the screen.
Phew im glad im not the only one, the smudge is barely noticeable except under light and while the screen is off. Going to try to clean it.
Is the smudge you guys are talking about, blue by chance? I have a slight blue streak underneath my screen since it was purchased. To best describe it, it looks like a shiney blue streak from cleaning with windex that never dries.
Sent from my Nexus S using XDA App
Does any of you proud X owners think that if one applies the a screen protector incorrectly (bits of dust between the protector and the screen) or something similiar, that it could cause the screen to scratch, having a sand-like effect? I'm really paranoid about the screen when it's naked...
btw. how the hell am i supposed to put on a protector without air bubbles? Seems impossible.
I dunno about the first question. But you're supposed to be able to put it on using a credit card to smooth it out as you apply it. In saying that, I've never done it successfully
Sent from my One XL using XDA Premium
lukas_1 said:
Does any of you proud X owners think that if one applies the a screen protector incorrectly (bits of dust between the protector and the screen) or something similiar, that it could cause the screen to scratch, having a sand-like effect? I'm really paranoid about the screen when it's naked...
btw. how the hell am i supposed to put on a protector without air bubbles? Seems impossible.
Click to expand...
Click to collapse
I doubt having anything under the screen protector would harm these screens. The junk stuck under it isn't going to move as it's stuck in the adhesive.
The best way to apply them (for me anyways) is to clean the screen with an LCD cleaner (or make your own), use tape to blot up anything else, wipe again.
Next--I have found by taking the first layer of the film protecting the screen protector upside down works best. Dust and debris can fall and settle on the sticky side. Then carefully apply. As long as you don't touch the adhesive side, you can pick it up and keep applying the protector until you get it right. You want the top of the protector just about even with the AT&T globe.
Enjoy.....
By using tape do you mean using scotch tape, sticking it on the screen and pulling off?
I'll try washing my screen protector, drying it up, cleaning the screen with MF cloth, taping it up and then hopefully I'll be able to apply it perfectly! :fingers-crossed:
lukas_1 said:
Does any of you proud X owners think that if one applies the a screen protector incorrectly (bits of dust between the protector and the screen) or something similiar, that it could cause the screen to scratch, having a sand-like effect?
Click to expand...
Click to collapse
If you trap a particle of dust under the protector that has a hardness greater than the screen, yes, it will eventually scratch the screen in that spot.
However: Gorilla Glass has a Mohs hardness of around 9, which means there is not a lot in the mineral world that can scratch it. The likelihood of your trapping something like that under the screen protector, if you apply it correctly, is not great.
You should be able to remove a particle big enough to scratch your phone from the screen protector without having to wash the protector. I think you would ruin the screen protector if you wash it.
I've used packaging tape as it leaves no residue. Done it for years before with iPhones before owning an Android.
Sent from my HTC One X using xda app-developers app
When you apply your screen protector, do it in a washroom with a hot shower running. The steamy air will prevent dust from getting under it.
I will try that out. I always seem to get a bit of dust or lint on the corner of my screen protectors.
flar2 said:
When you apply your screen protector, do it in a washroom with a hot shower running. The steamy air will prevent dust from getting under it.
Click to expand...
Click to collapse
Just don't wait too long, not sure if the humidity sensor would get affected.
The way I do it: obviously, I clean the screen then remove completely the clear layer from under to make sure no dust will fall in. I'm holding the screen protector with the tips of my fingers on the sides and gently bend it across (the long) median then align with the phone's screen (this is the hard part). Put the screen protector on the screen at this stge the contact area will be the median line, and then use a credit card and work your way to the eges (one side at a time). I never got any bubbles under this way. I caught some dust particles few times though. It takes patience but it pays off, currently I have no dust or bubbles on it.
Sent from my HTC One X using xda app-developers app
iElvis said:
If you trap a particle of dust under the protector that has a hardness greater than the screen, yes, it will eventually scratch the screen in that spot.
Click to expand...
Click to collapse
If the particle is trapped in one place and can't move, I don't see how it can cause a scratch.
Plus, if any dust gets on the screen during the application process (as long as you've done a halfway decent job), its probably airborne. So its not grit or sand or anything like that (which would just fall to the ground instantly) but more likely skin, ash, etc.
A little preparation and a few tricks will go a long way to a good screen protector install. My process is:
1) Use a wet apply protector. Don't know why, but I've had vastly better results (no dust under protector) with wet apply rather than dry ones. I got to the point where I can do a dry type almost flawlessly, but only after lots of practice and a great amount of care. But even so, there still tends to be a dust particle or two. With wet apply, the first one I ever tried was perfectly dust free with little effort, and the subsequent ones also.
2) Before starting, examine the protector and see how it fits on the phone. With the backing still on the protector, place it on the phone's screen and match up the openings and edges to familiarize yourself.
3) As previously mentioned, use steam to pull dust out of the air. I run a hot shower for 5-10 minutes, then apply the protector in the bathroom. It won't eliminate all the dust, but makes a big difference.
4) Wipe the screen off with a micro-fiber cloth (often included with better quality wet apply protectors).
5) Blow off the screen with a can of compressed air (the kind used to dust electronics and whatnot) to get rid of any remaining dust.
6) Spray the application solution. Quickly apply the protector. As another mentioned, don't hold the sticky side up after you take the backing off, or it will instantly catch dust. Put the protector on quickly, don't let the sticky side touch anything but the screen. Handle the protector as little as possible, and by the edges.
7) Squeegee the protector down with a credit card (make sure the edge of the card is smooth) or some protectors will include a rubber squeegee. Blot the excess moisture at the edges. Then leave the phone alone while it dries.
The best investment for my smartphone has been Ghost Armor. I have spent so much money on packs of screen protectors. A couple years ago I decided $45 was worth it if I only needed to do it once a year. You won't regret it, and you don't have to install it.
Npsacobra said:
The best investment for my smartphone has been Ghost Armor. I have spent so much money on packs of screen protectors. A couple years ago I decided $45 was worth it if I only needed to do it once a year. You won't regret it, and you don't have to install it.
Click to expand...
Click to collapse
I've also heard horror stories about peoples phones not working after they are done or the screen not functioning afterwards. And since you sign an agreement they aren't liable
No thank you
Sent from my One X using Tapatalk 2
Npsacobra said:
The best investment for my smartphone has been Ghost Armor. I have spent so much money on packs of screen protectors. A couple years ago I decided $45 was worth it if I only needed to do it once a year. You won't regret it, and you don't have to install it.
Click to expand...
Click to collapse
I replace about 3 screen protectors a year (bought from amazon clear ones, 3 for $1.99). Other than a little rainbow effect when the screen is off, no regrets looks just like glass. I've been through many protectors before (ridiculously many on my first 'smartphones' rip moto ming, touchpro 1&2) but I can't justify the cost anymore, I'd rather have none (since I change my device every 8-12 months).
Sent from my HTC One X using xda app-developers app
I went with ghost armor myself, they installed for like 22 bucks.
No issues to report.
WR
Sent by WR's O/C'd One-XL on CR-V
Npsacobra said:
The best investment for my smartphone has been Ghost Armor. I have spent so much money on packs of screen protectors. A couple years ago I decided $45 was worth it if I only needed to do it once a year. You won't regret it, and you don't have to install it.
Click to expand...
Click to collapse
Screen protectors that come in packs are crap. The higher quality kind that cost $15 or so (Skinomi, Zag, etc) are in a different class. I've had a Skinomi on my One X since release (May), and one on my Flyer for almost a year and a half. Both are still looking great.
Sent from my HTC One X using xda app-developers app
I've never used a screen protector. Don't like the feel of them. This phone has great glass. I'm a mechanic and I keep my phone in my pocket all day (screen towards my leg of course) and not one scratch
Sent from my HTC One XL using xda app-developers app
I use Xtremeguard. Wet application and every time I get a perfect install. No bubbles no particles.
Sent from my HTC One XL using Tapatalk 2
charlieb620 said:
I use Xtremeguard. Wet application and every time I get a perfect install. No bubbles no particles.
Sent from my HTC One XL using Tapatalk 2
Click to expand...
Click to collapse
Was gonna say the same bout my Zagg...love it! Wet application and a squeegee, works perfect every time. The wet app also can aide with alignment if you don't get it just right, you can still move it before you squeegee.
Sent from my HTC One XL using xda premium
Not sure if this is still relevant, but I will put a vote for Ghost Armor as well. I have it for all my devices and it's like there's nothing there. Crystal clear and screen responsiveness is great. Had Zagg before and the orange peel feel and stickiness made me remove it. Those cheap packs aren't great either, they scratch up very very quickly.
Yesterday i bought the Spigen glass.tr screen protector
it's a dry protector and no wet solution needed
the biggest problem any one can had is the dust under the screen protector
anyway
i installed the protector after cleaning my phone screen very carefully and i was sure that there was no dust there
and of course after the installation there was some dust between the protector and the screen
i was very mad . it's a 30$ protector
i removed the protector and using some alcohol (the white one that u can find in any drug store )
i cleaned the protector
then i made sure that the protector stays wet with the alcohol and i applied it then used the squeegee to remove any small drops of alcohol between the screen and the protector
and now its perfect no dust and no bubbles at all
i wanted to share this with everyone having trouble applying his glass screen protector
miahegypt said:
Yesterday i bought the Spigen glass.tr screen protector
it's a dry protector and no wet solution needed
the biggest problem any one can had is the dust under the screen protector
anyway
i installed the protector after cleaning my phone screen very carefully and i was sure that there was no dust there
and of course after the installation there was some dust between the protector and the screen
i was very mad . it's a 30$ protector
i removed the protector and using some alcohol (the white one that u can find in any drug store )
i cleaned the protector
then i made sure that the protector stays wet with the alcohol and i applied it then used the squeegee to remove any small drops of alcohol between the screen and the protector
and now its perfect no dust and no bubbles at all
i wanted to share this with everyone having trouble applying his glass screen protector
Click to expand...
Click to collapse
Thanks for the tip! I just ordered mine yesterday and was looking for a solution to this ahead of time. This should work great!
So no hazing or issues with the alcohol coming in contact with the edges (case or what have you)?
.Pie said:
Thanks for the tip! I just ordered mine yesterday and was looking for a solution to this ahead of time. This should work great!
So no hazing or issues with the alcohol coming in contact with the edges (case or what have you)?
Click to expand...
Click to collapse
water works to..
.Pie said:
Thanks for the tip! I just ordered mine yesterday and was looking for a solution to this ahead of time. This should work great!
So no hazing or issues with the alcohol coming in contact with the edges (case or what have you)?
Click to expand...
Click to collapse
Don't worry about it
Thats why i'm using alcohol
But it will be better if your phone was switched off while you r trying this
Sent from my GT-I9500 using xda app-developers app
How did you remove it? Most stories I've read of someone removing have led to a problem in the area where they first pried it up.
Usally whn this happens i just get tape and stick it under the screen protector without removing it totally or screen and remove the dust. And lay the screen protector again. Always works for me.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Mime ghost glass comes with an anti-dust film. All I did to install was wipe the screen down to remove oils, stick on the film and remove it, and put the glass on. Not a single bubble or spec of dust on the first try.
Great tip!
One has to be OCD about cleaning, to ensure dust free surface before application!
I was able to install it in one go without any dust particles!
I had it in a very well lit room on my workbench with table lighting + my ledlenser headlight looking at the screen from various angles and gave a final wipe with the included mf cloth ( had cleaned the screen prior to final wipe with included ipa swab quite a few times)just before removing the film to install glas.tr.
Not to mention I minimized airflow throughout the room which really helped to prevent dust movement and recontamination of the screen surface!
Sent from my GT-I9500 using Tapatalk 2
flu13 said:
How did you remove it? Most stories I've read of someone removing have led to a problem in the area where they first pried it up.
Click to expand...
Click to collapse
you have to remove it very carefully and move you finger while you remove it
kinubic said:
Usally whn this happens i just get tape and stick it under the screen protector without removing it totally or screen and remove the dust. And lay the screen protector again. Always works for me.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
not if you dust is on the middle
and if you have a cat or dog , it will be a miss
i use your method always when there is dust at the corners or edges so it easy to remove it
Thanks for this. I ruined and discarded a glass screen protector because I tried to remove dust using the old tape method. By the time I was done so much other stuff had landed on the sticky side that I gave up. I then tried water but it was too sticky to make a difference. I may buy another one now knowing I can use rubbing alcohol!
If you're really nuts about no hazing from alcohol then use some true 190 proof Everclear.
Also, use a bunch of bursts from a can of compressed just before you apply the protector, but be careful to not blow anything on the exposed backing.
I would use an isopropyl or ethyl type alcohol, no acetone.
I've always just gone into my bathroom, run the shower at hot until the mirror glass begins fogging up, clean off my phone screen, apply the protector.
The steam will weigh down the dust particles in the air allowing you to install your screen protector without finding dust immediately after you just cleaned it.
orlandoxpolice said:
I would use an isopropyl or ethyl type alcohol, no acetone.
Click to expand...
Click to collapse
I think the medical one is ethyl
Sent from my GT-I9500 using xda app-developers app
nickhimself said:
I've always just gone into my bathroom, run the shower at hot until the mirror glass begins fogging up, clean off my phone screen, apply the protector.
The steam will weigh down the dust particles in the air allowing you to install your screen protector without finding dust immediately after you just cleaned it.
Click to expand...
Click to collapse
Thats a great method to apply a screen protector
I'f tried it before but cause i wear glass it gets foggy and i end up not seeing what i'm doing
Sent from my GT-I9500 using xda app-developers app
nickhimself said:
I've always just gone into my bathroom, run the shower at hot until the mirror glass begins fogging up, clean off my phone screen, apply the protector.
The steam will weigh down the dust particles in the air allowing you to install your screen protector without finding dust immediately after you just cleaned it.
Click to expand...
Click to collapse
That sounds like an interesting idea too. Only downside I might see is if the steam gets between the glass and the phone, and the steam is from impure water (no tap water is perfectly pure), and those mineral deposits become visible in between the glass someday. But I'm probably overthinking it. Will have to do an install myself in a few weeks, tough to decide between the steam room and the alcohol methods.
The111 said:
That sounds like an interesting idea too. Only downside I might see is if the steam gets between the glass and the phone, and the steam is from impure water (no tap water is perfectly pure), and those mineral deposits become visible in between the glass someday. But I'm probably overthinking it. Will have to do an install myself in a few weeks, tough to decide between the steam room and the alcohol methods.
Click to expand...
Click to collapse
That's why I said "as soon as the mirror starts to fog up" instead of "wait until everything's so foggy you can barely see in front of your face".
You can also wait until you start seeing some steam, then open your bathroom door a crack and turn off the shower. That'll stop the accumulation of steam but still allow you to proceed with the installation.
flu13 said:
How did you remove it? Most stories I've read of someone removing have led to a problem in the area where they first pried it up.
Click to expand...
Click to collapse
can you elaborate on this? what kind of problem, i know i have a replacement on the way from MIME (amazing customer service btw), so i'm curious why peopled are having an issue with removal...
I've just seen a handful of stories in this forum where people have peeled up their glass and when they've put it back down, the corner they peeeled from won't lay flat.
I ended up with few of the small spiderweb bubbles under my Nilkin screen protector I installed last night. A few along the very top edge of the glass, and a few at the bottom. I am currently trying the binder clip with micro-fiber cloths trick to apply pressure and remove them. If that doesn't work, I saw a mention of putting the phone in a plastic bag and using a vaccuum hose.
1.) Has the vaccuum trick worked for anybody here.
2.) I got to thinking about this. I have a foodsaver vaccuum sealer for storing food. Would this do a better job of pulling out the bubbles since it creates a better seal?
I don't see how it could hurt the phone in any way. Others thoughts on this?
-Jeremy
What i would suggest :
Clean the screen with piece of cloth ( Mostly comes with the package)
Get some tape 2 pcs...
place one on the top of the screen protector , and pull it slowly to remove the screenprotector
get the other piece of tape and tape it around ur finger (Inside out) now with 1 finger u would pull the screen protector up
and with the other u would tap the screen where the bubbles are , this will make the bubbles go away!
Then just replace the screen protector and remove the tape, DONE!
PS: If this didn't help , then send your device to me i will fix it for free :good:
Bubbles are created by dust on the screen. I read someone suggest lift the protector with one piece of sticky tape then use another to remove the dust from the screen and protector. Do this for each bubble
Edit. Crap. Teaches me not to read the replies
Sent from my Nexus 5 using Tapatalk
Blowtorch em off
Sent from my Nexus 5 using Tapatalk
Assuming its not dust....just a bubble, like the huge one to the right of the led notification ....I used a thin cloth and an adjustable wrench and tighten the wrench firmly on the bubble...with the cloth protecting the phone of course. In 20 minutes per bubble....I had none. Gone for good.
Mime ghost glass BTW.
Sent from my N5 cell phone telephone....
I would suggest not doing it during night time. Do it on a very illuminated area. Clean with the provided cloth uniformly until looks perfect. I my self always blow the screen during the sticking process and never get dust between screen and protector. If any bubble, sweep it with a credit card before removing the top layer.
As someone said once you have them its a fail. I use the glass ones I know they crazy prices but I do the steam room bit and drop them on. No bubbles.
Sent from my Nexus 5 using XDA Premium 4 mobile app
You may (or may not) have noticed it is easier to apply screen protectors at times; you could apply them all day flawlessly, and other days they just don't play ball. The reason is humidity! The more humid the environment the less chance there is of dust particles wizzing around. Typically this will be summer here in the UK where its gets really humid. To replicate the humidity in colder climates / seasons, you can run a hot shower or bath and let the bathroom steam up. The screen protector should apply perfectly there, but you don't want to spend to long there with your precious phone, condensation and all. You could also try bowls of steaming hot water around the area you're going to be applying the screen protector in.
Be sure to apply common sense before applying the screen protectors if you're going to be using the above mentioned methods and the usual rules apply, clean the screen etc before hand.
Just installed the Bodyguardz Pure Tempered Glass screen protector with the Express Align tray on my white Galaxy S6.
It is 100% Halo Free and went on pretty much perfect. Not sure how it would come out on the black S6 but I'm not complaining about mine.
I have installed tons of screen protector over the years and this is my first Bodyguardz. The Express Align tray works perfect and I highly recommend it.
Just made sure you push real hard and wait for the protector to adhere to the phone before trying to remove the Express Align tray.
Well worth the $35.00 from the AT&T Store. I also have the Zagg as a back up but don't think I'll be needing it right now.
It's a little short on the top and bottom but that is how they avoid the halo.
I'm sure Bodyguardz will be offering their "Crown" for the S6 Pure in the near future.
I also managed to installed it without getting any junk under the screen
(the spots in pics are only in the pics, not under glass).
Here are a few pictures.
Can you share any tips that help to prevent dust or lint get under the screen during installation?
AirSupply said:
Can you share any tips that help to prevent dust or lint get under the screen during installation?
Click to expand...
Click to collapse
Just a real clean area and have a nice bright light over the area you are working on. Also a can of compressed air comes in handy. Soft Micro Fiber rags. I use the Giottos Large Rocket Blower ( used with my cameras). I believe that they are only like $10. and something you will always use as I do. Bodyguardz is coming out with their "Crown" for the S6 to fill in the spaces.
http://www.amazon.com/Giottos-Rocket-Blaster-Blower-Large/dp/B00017LSPI
My tip for a clean and lint free installation. Go into your bathroom. Turn on the shower with hot water. Let it get nice and steamy. It will settle the dust in the room and then clean and apply the screen protector. Sounds crazy but been doing this for years and never get anything under my screen protectors.
c_86 said:
My tip for a clean and lint free installation. Go into your bathroom. Turn on the shower with hot water. Let it get nice and steamy. It will settle the dust in the room and then clean and apply the screen protector. Sounds crazy but been doing this for years and never get anything under my screen protectors.
Click to expand...
Click to collapse
+1
I've been doing this for a while to.
Sent from my SM-G920V using XDA Free mobile app
c_86 said:
My tip for a clean and lint free installation. Go into your bathroom. Turn on the shower with hot water. Let it get nice and steamy. It will settle the dust in the room and then clean and apply the screen protector. Sounds crazy but been doing this for years and never get anything under my screen protectors.
Click to expand...
Click to collapse
That depends on your location actually. I also do the same but Moscow is very very dusty city and I live near the highway... so even after the hot shower I can see particles floating))) Usually I buy couple of protectors so succeed with at least one, that is not an option with a 35 bucks SP though )
Another vote for the steamy shower route.
I'm tempted to pull this one off and try the Zagg I have sitting here.
If it was not so short on the top & bottom it would be perfect.