I think my phone may be hard bricked.
I was trying to follow the steps in http://forum.xda-developers.com/showthread.php?t=1141550, when I ran into the situation I'm now in.
I followed all of the steps perfectly with the exception of rebooting to recovery, I accidentally rebooted normally. After it had started up and sat for about 5 minutes or so, I rebooted back to recovery. I reflashed the ext4 zip, then Black Ice ROM, and then Bali 3.1. I went to the voodoo menu and disabled both options and told the phone to reboot again.
It sat at the SGS4G screen for 20 minutes and I never heard linda speak during this entire time. I got tired of waiting and pulled the battery. Now the only thing I ever get is the SGS4g screen. I let it sit that way while I slept and when I woke up 3-4 hours later it was still on that screen. I've tried following the advice given in the thread mentioned above to put it back into download or recovery with no luck.
When I connect the phone to the PC instead of recognizing it, it complains about it and immediately makes the USB disconnect sound. If I leave it plugged in every 5-10 minutes or so it'll pop up the warning in the system tray again, and make the USB disconnect sound. If I unplug the phone from USB, the battery charging screen stays on. If I plug back in to USB at this point it'll make the sound like it's connected but never shows in Windows device manager, 'adb devices', or in ODIN. Any ideas before I call it a hardbrick and try to take it back to the store?
chadder said:
I think my phone may be hard bricked.
I was trying to follow the steps in http://forum.xda-developers.com/showthread.php?t=1141550, when I ran into the situation I'm now in.
I followed all of the steps perfectly with the exception of rebooting to recovery, I accidentally rebooted normally. After it had started up and sat for about 5 minutes or so, I rebooted back to recovery. I reflashed the ext4 zip, then Black Ice ROM, and then Bali 3.1. I went to the voodoo menu and disabled both options and told the phone to reboot again.
It sat at the SGS4G screen for 20 minutes and I never heard linda speak during this entire time. I got tired of waiting and pulled the battery. Now the only thing I ever get is the SGS4g screen. I let it sit that way while I slept and when I woke up 3-4 hours later it was still on that screen. I've tried following the advice given in the thread mentioned above to put it back into download or recovery with no luck.
When I connect the phone to the PC instead of recognizing it, it complains about it and immediately makes the USB disconnect sound. If I leave it plugged in every 5-10 minutes or so it'll pop up the warning in the system tray again, and make the USB disconnect sound. If I unplug the phone from USB, the battery charging screen stays on. If I plug back in to USB at this point it'll make the sound like it's connected but never shows in Windows device manager, 'adb devices', or in ODIN. Any ideas before I call it a hardbrick and try to take it back to the store?
Click to expand...
Click to collapse
Press and hold vol up and down and insert the usb cord that will get you into download mode..
You are at a softbrick.
RaverX3X said:
Press and hold vol up and down and insert the usb cord that will get you into download mode..
You are at a softbrick.
Click to expand...
Click to collapse
I've tried pulling the battery and putting it back in so it's fully shut down before holding the volume keys and connecting USB. It makes the USB connect sound and quickly makes the USB disconnect sound, gets the popup in my system tray saying it's an unrecognized USB device and doesn't go to download or a yellow triangle screen. Doesn't appear in ODIN or 'adb devices'. I've tried it this way repeatedly since last night.
I've also tried waiting until it's on the battery charging screen to pull the USB cable. It stays on the battery charging screen even though it's obviously not charging anymore. I hold the volume buttons anyways and plug the USB cable back in, and it makes the connect sound but it still never goes to download mode. I've tried it this way several times as well.
I've put my phone into download mode many times before so I can't imagine my method is wrong, I'm not doing it any differently than I ever have before. It's just behaving strangely. I've never had it stick on the battery charging screen before when I unplug the USB cable...
chadder said:
I've tried pulling the battery and putting it back in so it's fully shut down before holding the volume keys and connecting USB. It makes the USB connect sound and quickly makes the USB disconnect sound, gets the popup in my system tray saying it's an unrecognized USB device and doesn't go to download or a yellow triangle screen. Doesn't appear in ODIN or 'adb devices'. I've tried it this way repeatedly since last night.
I've also tried waiting until it's on the battery charging screen to pull the USB cable. It stays on the battery charging screen even though it's obviously not charging anymore. I hold the volume buttons anyways and plug the USB cable back in, and it makes the connect sound but it still never goes to download mode. I've tried it this way several times as well.
I've put my phone into download mode many times before so I can't imagine my method is wrong, I'm not doing it any differently than I ever have before. It's just behaving strangely. I've never had it stick on the battery charging screen before when I unplug the USB cable...
Click to expand...
Click to collapse
buy the download mode jig or make one.
chadder said:
I've tried pulling the battery and putting it back in so it's fully shut down before holding the volume keys and connecting USB. It makes the USB connect sound and quickly makes the USB disconnect sound, gets the popup in my system tray saying it's an unrecognized USB device and doesn't go to download or a yellow triangle screen. Doesn't appear in ODIN or 'adb devices'. I've tried it this way repeatedly since last night.
I've also tried waiting until it's on the battery charging screen to pull the USB cable. It stays on the battery charging screen even though it's obviously not charging anymore. I hold the volume buttons anyways and plug the USB cable back in, and it makes the connect sound but it still never goes to download mode. I've tried it this way several times as well.
I've put my phone into download mode many times before so I can't imagine my method is wrong, I'm not doing it any differently than I ever have before. It's just behaving strangely. I've never had it stick on the battery charging screen before when I unplug the USB cable...
Click to expand...
Click to collapse
check your pm.
Hey. I had the same exact problem. I couldn't get into download mode...and thus no odin. Look in the bible. There is a guide on how to get into download mode multiple ways. I used method 2. After that, follow the guide to flash using odin, also in the bible. hope you get it fixed.
Sent from my SGH-T959V using XDA Premium App
or u could try to reboot windows and see if you still get the usb error heaven forbid that it doesnt mess up lol
I had this exact same problem one day.... It is a soft brick i promise... I cant remember what i did to get into download but try everything you can. When i first flashed the bali 3.0 it did this too me. I was eventually able to get into download mode and reflash. Keep trying brother you will get it eventually get it.
Sent from my SGH-T959V using XDA App
farwek said:
I had this exact same problem one day.... It is a soft brick i promise... I cant remember what i did to get into download but try everything you can. When i first flashed the bali 3.0 it did this too me. I was eventually able to get into download mode and reflash. Keep trying brother you will get it eventually get it.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
HAH SUCCESS!! I finally got it into download mode by pressing ONLY vol down and power. Worked like a charm. Pressing both vol buttons is what was killing me. I got into download mode with Vol Down and Power, and then had to uninstall/reinstall my samsung drivers. Odin now sees my phone and I'm pushing KD1 as we speak. Thanks a million everyone. I love this forum. Thanks to all who helped.
chadder said:
HAH SUCCESS!! I finally got it into download mode by pressing ONLY vol down and power. Worked like a charm. Pressing both vol buttons is what was killing me. I got into download mode with Vol Down and Power, and then had to uninstall/reinstall my samsung drivers. Odin now sees my phone and I'm pushing KD1 as we speak. Thanks a million everyone. I love this forum. Thanks to all who helped.
Click to expand...
Click to collapse
You should probably flash KC1
Beefvvl said:
You should probably flash KC1
Click to expand...
Click to collapse
god people are still using that ginger release sigh wish it was gone.....
rootzrobot said:
vol. down and power means u were on gb bootloaders....and you most likely still are.
Click to expand...
Click to collapse
+1
[10chars]
RaverX3X said:
god people are still using that ginger release sigh wish it was gone.....
Click to expand...
Click to collapse
+1 on that. I wish penguin0609 would at least update the op of the issues with it or at least have mr clown close the thread and take the link out.
Related
hey guys,
my phone litteraly wont do anything. i f*ed up some fonts using type fresh, then tried to restore using the odin3 downloader. i accidentally closed it, and now my phone wont boot up/react to any buttons pressed. any help? thanks guys!
had the same problem. i cant figure out how to even get odin working, it says one click but when i hook up it to odin it gives me a message that still doesnt tell me ****. i had to send my phone back for a new one and told them i used easyroot on the market bc i didnt know what it was and it sounded cool but now i know not to ever do that again that it messd up my phone. Praying to god that they dont charge my for anything
You should still be able to enter bootloader mode by turning phone off and holding down up/down vol and pwr simultaneously until boot screen flashes then release power button only
it wont even do that
open odin (use the stock one click version)
with the phone off (remove/reinsert the battery if need be) and not plugged in; hold vol. down and insert the usb cable (keep holding vol. down untill you see the download screen). this should put you into download mode and if you have the right drivers odin should recognize the phone.
I've stuffed my captivate on a few occasions and so far I have been able to use this method to get into download mode and fix it.
it wont do anything at all. it wont power on, show up in adb, anything... and stupid att wont do ANYTHING -_- oh well. any help would be appreciated!
Have any of you offering support to the OP actually had your phone in the described state? I've read a few posts where the phone is seemingly completely dead as the OP describes and no one says they've successfully recovered from that state. All I ever see is the same old button combinations/battery/usb shenanigans and statements of that should work and that the phone is unbrickable. I have personally seen a device that was behaving in such a manner and no combination of battery pulling, usb plugging, button holding, or tongue twisting would generate anything from the phone. The only thing the phone would do was get hot.
same here. Phone showed bright green screen...wasnt done with teh flash and said it was finished...now the nly thing I can get is power and hold the vlume up for some IRQ and hex stuff. I posted a questionthis morning but...serious. Vol up and down and any things else gives nothign but a black screen..battery out...back in anything..its torched.
Have you tried getting into download mode via the sdk?
Sent from my SAMSUNG-SGH-I897 using XDA App
daveshih said:
Have you tried getting into download mode via the sdk?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
when i plug it in, windows doesnt make any noises and doesnt recognize it, and when i use the "adb devices" command, nothing shows up.
daveshih said:
Have you tried getting into download mode via the sdk?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Did you read the rest of the posts? The OP already stated several times that the phone does nothing. I realize that most people will say it does nothing or is "bricked" if it simply shows the "connect to computer" screen, but the OP has stated more than once that the phone shows nothing. Yes, everyone is trying to help, but simply repeating what has been said numerous times before doesn't help.
Has anyone actually recovered a phone that displays NOTHING? No logos, no recovery, no nothing.
Last night, i turned off the light in my room when i noticed a glowing from my desk. i walked over, and it turns out my captivate's screen was in fact on, it was just a faint black glow, and none of the power buttons would do anything. when i took the battery out, it shut off completely!
As I pointed out here
http://forum.xda-developers.com/showthread.php?t=757293
Im pretty sure it was my fault for not completely following instructions on the ext4 one click install root, settings.db etc so everyone needs to make sure if the dev says flash before..do it.
State of the phone was, it would not completely power on..therefor no usb drivers would load and Odin cannot see the phone and it can no longer flash..the only thing I could get it to do was show a screen with that text. I put in my post. I ordered it via letstalk.com so I sent it back and assuming they get the same result Ill have a new one hopefully by the end of the week. Im just glad I stil had my old iphone3 to slap my sim card in.
The odin one click flash thing..it just flaked right at the start it looked like..but I cant be sure because as soon as I saw a blue progress bar I stepped into the kitchen for abtou 30 sec..I came back and the screen was florescent green and Odin said it was done. I knew something was wrong as it was way too fast so I unplugged, removed the battery and set it back in...from there on out it would do nothing with the power button unless on a semi rare occasion if I hit the volume up button and power I got the IRQ stuff.
Annoying as I had a nandroid backup just before I started messing with it.
i just sent mine into samsung... back to mah ol trusty blackjack. gonna have to get used to supermario bros 3 instead of spyro....
ANYWAYS theyre sending me a new one!
uiskibum said:
open odin (use the stock one click version)
with the phone off (remove/reinsert the battery if need be) and not plugged in; hold vol. down and insert the usb cable (keep holding vol. down untill you see the download screen). this should put you into download mode and if you have the right drivers odin should recognize the phone.
I've stuffed my captivate on a few occasions and so far I have been able to use this method to get into download mode and fix it.
Click to expand...
Click to collapse
So, yes in same state as op... no nothing... couldn't get jack out of it. at all, none
what this post said worked.... not holding power button... nothign...
removed battery
plugged in battery
hold vol down
(still no response)
plug in usb cable and continue holding vol down.
it went to recovery mode
... no holding of power button, just vol down and plugged in USB... give it a shot man, let me know
EDIT: feel free to PM me if you want me to help walk you through it...
ace518 said:
So, yes in same state as op... no nothing... couldn't get jack out of it. at all, none
what this post said worked.... not holding power button... nothign...
removed battery
plugged in battery
hold vol down
(still no response)
plug in usb cable and continue holding vol down.
it went to recovery mode
... no holding of power button, just vol down and plugged in USB... give it a shot man, let me know
EDIT: feel free to PM me if you want me to help walk you through it...
Click to expand...
Click to collapse
Hey thanks, but i already sent it to em... thank you everyone for your help!
Just a note... i said before hold vol down and plug in usb. I had it in a pretty bad state tonight. Played around. Same idea as before, but had to hold vol up and vol down. If i brick a few more times, i'll give a better guide. But this phone can DEFINITELY come back from a state where you can't even get it to power on. Figured any additional info on this would be good.
Ok I was flashing back to stock 2.1 useind odin when mid process my phone fell battery out usb disconnected and bam thats it. Now my phone is locked on a screen that shows a picture of a phone ! and a computer. I can get it back to download mode and odin will se the phone but gets no further then do not unplug device, my computer beeps when its plugged in but it dose not show the phone in my computer section. Any fixes or am i screwed?
PS phone is only two weeks old if need be could I take it back like this????
Hmm I think I may hove gotten past this problem. Uninstalled odin reinstalled and now it seems to be hopefully working
Here is the fix
I was in this same situation yesterday. Here is how to get it back into download mode.
•Be sure the Samsung USB drivers for the phone are installed on your computer.
•Remove and replace the battery.
•Connect the phone to the computer with the USB cable. The "phone-exclamation mark-computer" picture should display on the phone's screen.
•Hold the Volume Up+Volume Down+Power buttons down simultaneously.The screen should go blank, then the picture should appear again. When the screen goes blank a second time, release the Power button while continuing to hold the Volume Up+Volume Down buttons down
If that doesn't work,i had a similar problem where I could get into odin, but it would progress beyond the pit file. Take the battery, sim and memory card out of your phone. Start odin. Put the battery only back in. hold volume up and down. Plug the phone in while holding these buttons. Don't let go until you are in download mode. Now try restoring. It should work.
Thanks for the input i am back up and running!!
Sent from my SAMSUNG-SGH-I897 using XDA App
Bricked replacement Captivate - Orange Screen
Just to let you know. I recently received a replacement captivate thru warranty exchange. The phone was apparently a new one with JF6. So I decided to do an update to JH7 using Kies mini. A little over half way to the update procedure, the phone screen turned orange and stayed there for a long time, eventually I had to pull the plug. Of course I had to manually go to download mode and launch Kies mini emergency recovery, the damn thing again got stuck at the orange screen.
If anybody has this experience do no proceed further and throw that damn thing back at At&T's face. Do not attempt to do anything. I made a mistake of then doing an ODIN one-click back to stop and the phone got stuck half way, went to the orange screen.. and then it was over.. The phone was dead, wouldn't turn on, no recovery or download mode with any button combo. When I plugged in to the wall, no battery indicator.
save yourself the trouble and return the damn thing
still there
I am a "noob" to posting here, and a noob to the android due to being an avid iPhone user. I am having the same problem, phone -!- computer and have tried every method i can find in this forum to get passed it. Are there any other thoughts or suggestions? (got hung at do not turn off target in odin) Thanks in advance to any help.
I would look at this thread http://forum.xda-developers.com/showthread.php?t=1153310
Stephenv1971 said:
I would look at this thread http://forum.xda-developers.com/showthread.php?t=1153310
Click to expand...
Click to collapse
went that route, still cant find dl mode. have resistors built and all. any way i try to boot shows me the phone -!- computer, and the computer doesnt attempt to recognise it so there is no communication between the computer and phone. unfortunately, i dont have a v/ohm meter, so i am not sure of the accuracy of the resistors i used to make my jig.
I fixed this many times with phone that had the button download mode and didn't.
Getting into download mode while softbricked like this wont show the normal download screen. IT will still show the error screen....
With download mode working still:
Simply remove the battery and replace,
Open odin
Hold down volume keys and plug it in till you see odin recognize ur phone.
Then continue to use odin.
Dosent work, repeat.
If you know ur button combo dosent work:
Just open odin.
Remove battery & replace.
Use jig (3k 100k ohms twisted)
Then when the phone turns on and your see the pc! screen plug in usb.
See if odin sees it.
Assuming your flash didn't fail on the PBL.bin or SBL.bin you should be fine.
Follow the methods suggested by other users here and you will get back up and running in no time at all.
Don't sweat the 'phone-!-pc' screen. I'm a little surprised that no one has given you the good news....that is just a version of the download screen for later hardware revisions. It looks bad, but if Odin recognizes your phone (if one of the COM fields goes active), just start your flash again.
Now if Odin does not recognize the phone when plugged in via USB, then you have some more work to do.
I had forgotten about posting here, and my problem has been resolved. So here it is... I tried everything that I could find within this forum, almost. I built my own jig with inferior radio shack components that would not activate download mode, though it would turn the phone on. I got wise, spent 8 dollars at ebay and purchased a JIG there. Instant download mode after 3 days (shipping). Reflashed with one click, updated w/ kies, made kernal changes and am now rockin my captivate. Thanks to those who assisted.
Steve_O_1971 said:
I had forgotten about posting here, and my problem has been resolved. So here it is... I tried everything that I could find within this forum, almost. I built my own jig with inferior radio shack components that would not activate download mode, though it would turn the phone on. I got wise, spent 8 dollars at ebay and purchased a JIG there. Instant download mode after 3 days (shipping). Reflashed with one click, updated w/ kies, made kernal changes and am now rockin my captivate. Thanks to those who assisted.
Click to expand...
Click to collapse
Using the 3-resistor method takes A LOT of patience, at least in my experience. Glad everything worked out.
beast534 said:
Using the 3-resistor method takes A LOT of patience, at least in my experience. Glad everything worked out.
Click to expand...
Click to collapse
Patience is a virtue, and my Ex's name. LOL! I can do without patience.
Jokes aside, i actually soldered the resistors to a plug that i had cut up, and made sure it was covered so my skin wouldnt come in contact. The Radio Shack here buys inferior products and sells them at reggular retail. Unfortunately my $300.00 V-Ohm meter is on the fritz, and i have not had the time or money to replace it yet, but I have intentions to check the actual resistance of the jig I made. ^^
I have been having trouble with my Bell Vibrant for the past few days, with a black screen after the 'S' Tried several things out there to resolve this issue, nothing seemed to work.
In desperation I tried the Odin3 one-click, not noticing its for the captivate. I successfully flashed and am now in a reboot loop with the AT&T logo screen. I can't get into recovery mode. or download mode to re flash with different ROM.
Any ideas????
Yes this is a vibrant device running a captivate rom and I have also posted this question in Vibrant general.
[email protected] said:
I have been having trouble with my Bell Vibrant for the past few days, with a black screen after the 'S' Tried several things out there to resolve this issue, nothing seemed to work.
In desperation I tried the Odin3 one-click, not noticing its for the captivate. I successfully flashed and am now in a reboot loop with the AT&T logo screen. I can't get into recovery mode. or download mode to re flash with different ROM.
Any ideas????
Yes this is a vibrant device running a captivate rom and I have also posted this question in Vibrant general.
Click to expand...
Click to collapse
Use odin for the vibrant, not familiar with that SGS phone so I don't know if they have a one click odin . If not, you will need the stock .tar or kernel, modem and zimage files.
Open Odin in windows.
Take out your extSD, Sim and battery, wait 10+ secs.
Now plug the usb in.
While holding the vol +- insert the battery and it should go into download mode.
Now you can click start in odin.
I do know that the vibrant is a pain in the ass to get into download mode and that the above is the most consistent way to get there.
This is what I know of the vibrant, correct me if I'm wrong anyone.
For what it's worth, I had a hard time getting my captivate into download mode. This is what I had to do...when you do this, have the ODIN for your phone ready because if you back out from download mode, you'll get the blessed 'phone to computer' screen...which I was still able to get into download mode from...but some people haven't had such luck.
1) Turn off phone...(take battery out or whatever)
2) Holding the two volume buttons down, SLOWLY plug in USB cord HALF-WAY. Push it in just a tad...if the screen doesn't come up with the shoveling android...push in just a little bit more...keep doing this until you get the shoveling android...if the phone turns on...you missed it - start over.
3) Once in download mode, if the ODIN program doesn't see your phone on a COM port yet...push the USB cord in the rest of the way and it should see it then. I think I actually had to unplug the cord and plug it back in slowly till it saw it. Once it does see it, don't touch the cord anymore!
4) Click start on ODIN and let it do it's thing. You should see a progress bar show up on your phone's download screen within a minute or so...if not...turn off the phone and try again. you will get the 'blessed' screen but hopefully you won't have to do it.
My heart stopped for a bit when I tried the above and it didn't work the first time and I got the 'blessed' screen. But I just tried again and all was fine...so don't fret too much.
Anyways...hope this helps.
iceman198 said:
For what it's worth, I had a hard time getting my captivate into download mode. This is what I had to do...when you do this, have the ODIN for your phone ready because if you back out from download mode, you'll get the blessed 'phone to computer' screen...which I was still able to get into download mode from...but some people haven't had such luck.
1) Turn off phone...(take battery out or whatever)
2) Holding the two volume buttons down, SLOWLY plug in USB cord HALF-WAY. Push it in just a tad...if the screen doesn't come up with the shoveling android...push in just a little bit more...keep doing this until you get the shoveling android...if the phone turns on...you missed it - start over.
3) Once in download mode, if the ODIN program doesn't see your phone on a COM port yet...push the USB cord in the rest of the way and it should see it then. I think I actually had to unplug the cord and plug it back in slowly till it saw it. Once it does see it, don't touch the cord anymore!
4) Click start on ODIN and let it do it's thing. You should see a progress bar show up on your phone's download screen within a minute or so...if not...turn off the phone and try again. you will get the 'blessed' screen but hopefully you won't have to do it.
My heart stopped for a bit when I tried the above and it didn't work the first time and I got the 'blessed' screen. But I just tried again and all was fine...so don't fret too much.
Anyways...hope this helps.
Click to expand...
Click to collapse
He is on a vibrant, not a captivate although it should be close to the same procedure. I've seen the usb half plug method but it never did anything for mine.
A jig should do the trick. Get a MicroUSB-b plug breakout board from sparkfun.com and two resistors (300k+1k) in serial across pins 4 and 5. Turn your phone off and take the battery, sim, and external sd card out. Pop the jig into the usb slot and put the battery back in. The phone should go into download mode on it's own without you having to hit any buttons.
After that, just follow what everyone else said - use a one-click-stock odin for your particular model.
The jig worked. took a trip to the source and grabbed the resisters and took apart the micro USB adapter included in my BlueAnt handsfree.
followed the directions from
http://forum.xda-developers.com/showthread.php?p=9804077#post9804077
Back in business.
Thanks all.
[email protected] said:
The jig worked. took a trip to the source and grabbed the resisters and took apart the micro USB adapter included in my BlueAnt handsfree.
followed the directions from
http://forum.xda-developers.com/showthread.php?p=9804077#post9804077
Back in business.
Thanks all.
Click to expand...
Click to collapse
Glad that worked and thanks for the update info.
Im trying to explain everything to prevent unneeded questions
I have viewed several threads about this but absolutely none with an answer. My Samsung Infuse 4g with at&t (nonrooted) is in a bootloop. The cause of this was my every-other-day reboot. Once I turned it back on it goes to the samsung screen for about 5 secs, then goes black, then says samsung again and so on repeatedly. I pull the battery and as soon as it makes contact back with the phone it turns on by itself into the same Samsung screen over and over. When plugged into wall or computer it will show the charge screen where there is no battery life left, then it will flash and start up the charge screen again and so on just like the samsung screen. I cannot go into download mode (the buttons, at this point, do nothing. No response)
I have tried taking the battery out and plugging in usb cable to computer, then holding both volumes and putting battery in=charging loop
↑ with volume up=charging loop
↑↑ with volume down=charging loop
computer doesnt detect it, adb cant find it, cannot go into download mode, odin cant see it, heimdall cant see it, cant actually boot into anything, cant leave battery in or else phone will restart itself the entire time, and this was caused by my (already gbread) infuse 4g doing a regular reboot (aka power button, tap power off, after phone is confirmed off take battery out, battery back in, turn on)
Recommendations at this point? on a scale from 1=noob to 10=expert im a 7 on this type of thing. Ive always heard that as long as you can boot into a picture its only soft bricked but if i was right i wouldnt be here. Any and all help would be much appreciated. If you need me to post a video I would have NO problem doing that showing everything im doing.
oh, and by I have viewed several threads about this i meant that i have only been able to find 1 thread about it and 2 links that didnt work for me but might for you
link that worked- http://forum.xda-developers.com/archive/index.php/t-1354731.html
links that did not-
http://www.google.com/url?sa=t&rct=...ih1Zf_BvtcIbJXGEw&sig2=jjOcukFWr9sPWJZH1rlhnA
http://www.google.com/url?sa=t&rct=...ih1Zf_BvtcIbJXGEw&sig2=SZeMzIF2hnjdkk6GPDkovg
You might have already tried this way, but I've always held down both volume buttons first before plugging in the USB cord - not the other way around. You can also try different cords, different USB ports and/or different computers.
Mine was doing this the other day and it turned out to be my SD card being flaky. Maybe try taking it out and booting?
Radiotsar said:
You might have already tried this way, but I've always held down both volume buttons first before plugging in the USB cord - not the other way around. You can also try different cords, different USB ports and/or different computers.
Click to expand...
Click to collapse
Ive tried a hp touchpad cord, an atrix cord, and the original cord. I cant really do the button combo because as soon as the battery makes contact the phone turns on. thats why i had the usb cord in first to see if it worked. ive tried every usb port and 2 different laptops, the computer wont recognize it if the phone wont go past the samsung start up screen
J101 said:
Mine was doing this the other day and it turned out to be my SD card being flaky. Maybe try taking it out and booting?
Click to expand...
Click to collapse
I've taken the card out and used a different card, nothing. Tried taking sim card out, nothing.
I should have been clearer. Leave the battery out of the process until after attaching the cord and the screen coming up.
Sent from my SGH-I997 using xda premium
Radiotsar said:
I should have been clearer. Leave the battery out of the process until after attaching the cord and the screen coming up.
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
I do, every time.
1. battery out
2. hold down volume buttons (any combo)
3. attach cord (nothing happens, no screen, nothing)
4. put battery in
Results= Charging loop
lifetaker said:
I do, every time.
1. battery out
2. hold down volume buttons (any combo)
3. attach cord (nothing happens, no screen, nothing)
4. put battery in
Results= Charging loop
Click to expand...
Click to collapse
should be the same...wonder if you battery needs to be charged first, it should be fully charged at best...to do any flash/Odin/one click
this how I do it...basicly the same..
>take batt out
>plug in usb cable...to both phone and computer
>hold both volume buttons...NO NOT HOLD THE POWER BUTTON....
>put batt in...
and bam should see the android dude shoveling in yellow triangle...
If you get no response from the usb without the battery, and inserting the battery indicates the battery needs charging - I'd suspect the phone's usb port. Especially after trying different cords & computers.
Sent from my SGH-I997 using xda premium
Sorry for the sometimes choppy video recording.
http://www.youtube.com/watch?v=QWKdGS_5_Ps&feature=youtu.be
Have you tried a jig you can buy them on ebay for 6-12 bucks or you can donate one of you old cables and make it your self..
http://galaxys2root.com/galaxy-s2-hacks/how-to-make-a-usb-jig-for-your-galaxy-s2/
this will/should get you into download mode
Hello.
I have the same problem... tried also everything now i gave it to cellphone shop, i hope you guys can give me answer before i am gonna waist $100
HELP?1
Help me please
I was in this state. There are two options I can think of. A JIG as mentioned previously or the Heimdall One-Click-Unbrick. The one-click unbrick did it for me and got me back to cmw and download mode, then i could flash to stock, root and flash up to ICS. It was really easy and I stopped sweating once it booted to cmw instantly after running it.
Joe
hello.
The problem is when i connect it to my computer its keep disconnecting and doing terreble noise, (windows noise) when you keep connecting and disconnecting USB cable
JIG DIDNT WORK, because the same problem.... maybe the chargging connect is broken? or has a corrosion?
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Thanks ✟
Moving to Q&A
Sounds/Looks like a hardware issue...
Did it get any water damage in the past?
Hope you got warranty or still under warranty.
I am having exactly the same problem. My Infuse has never been rooted or unlocked (quite ironically, I was about to root it for the first time).
Boot loop when not plugged in, charge loop when plugged in. Absolutely no combination of buttons, inserting/removing the battery, and/or plugging/unplugging the USB has gotten it to do anything.
This has happened several times over the past few days. The first few times it sorted itself out in an hour or two. Today I couldn't get it to do anything at all.
I found several posts by people who have this problem, and it has never been conclusively solved from what I've seen. Finally one person said they fixed it by lightly smacking the phone with their hand. Lo and behold, it came on for about 5 minutes before looping again. So I smacked it again, and before it could re-loop, I factory reset it. A few hours went by and I was convinced that it was fixed.
A few minutes ago I had it plugged in to my computer via USB and was getting ready to SuperOneClick it. Then it went back into loop. I can't get it to come on this time. Again, no combination of buttons will send it into download mode. The computer can't see it. The battery is charged. The USB cable and port are fine. The software was reset earlier today. Does this mean that I have a hardware problem, or is there a software issue that could be fixable?
EDIT: So I decided to try hitting the power button, something that had never worked to this point, and the device came on. A couple minutes later it went back to boot loop. On a whim I tried download mode, which had stubbornly refused to work all day. Of course it immediately worked. Not really knowing what to try, since I'd already wiped user data, I wiped cache data and formatted the internal SD. Then I told it to reboot. Back to boot loop. A few minutes later, it came back on with the power button. Two minutes later, boot loop again. Then it restarted of its own accord. And now back to boot loop. I just don't even know anymore.
EDIT2: Just a thought... Something is weird with the power button. Whenever the phone is on and I hit power (briefly, not holding it down), it goes to the shutdown menu as though I'd held it down. A few seconds later, I'm always back in boot loop.
Infuse loop
I have found the problem. It is, in my case, the power button. I removed the case and crossed terminals with a paperclip. BAM. Booted up, and when I removed the paper clip.... back to boot loop at Samsung logo.
There is a place to send the phone. Ive see great reviews.
mobiletechvideos.mybigcommerce.com/samsung-infuse-4g-power-button-repair/
Seems like there has been a string of power button malfunctions going around lately. There are a few threads going on where people have had this issue. Sometimes its just the terminals needing to be cleaned or dust blown out.
Ok so my mytouch was charging on my computer then i went to check on a text message, the screen was black but i could see the backlight. So I assumed it was a normal glitch or something so i disconnected it and pulled out the battery, but it wont even turn on or charge now.
I did everyting
I took out the battery
I tried a different battery
I took out both the sim and the sd card
I tried to load on bootloader
I tried a wall charger
Nothing has worked!
Anybody got any ideas.
lifebound said:
Ok so my mytouch was charging on my computer then i went to check on a text message, the screen was black but i could see the backlight. So I assumed it was a normal glitch or something so i disconnected it and pulled out the battery, but it wont even turn on or charge now.
I did everyting
I took out the battery
I tried a different battery
I took out both the sim and the sd card
I tried to load on bootloader
I tried a wall charger
Nothing has worked!
Anybody got any ideas.
Click to expand...
Click to collapse
When you say "Wont even turn on or charge"...
Do you get a buzz when trying to turn on?
How long have you left it on charge?
Does your computer recognize it when plugged in?
Have you rebooted your PC since the issue started?
When you pulled the battery, did you also unplug the USB cable?
What happens if you take out the battery and while holding down volume + & - you plug into PC via USB?
Sent from my Nexus 7 using xda premium
GoPadge said:
When you say "Wont even turn on or charge"...
Do you get a buzz when trying to turn on?
How long have you left it on charge?
Does your computer recognize it when plugged in?
Have you rebooted your PC since the issue started?
When you pulled the battery, did you also unplug the USB cable?
Click to expand...
Click to collapse
There is no buzz because it wont even turn on.
It was on charge for about 10 minutes.
Yeah it does make an noise when i plug it in.
Yes.
And Yes
demkantor said:
What happens if you take out the battery and while holding down volume + & - you plug into PC via USB?
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
I hear the noise of something being recognized on my computer but nothing on the phone. Happens with or without the battery regardless.
Have you tried any adb commands?
adb reboot bootloader
adb reboot recovery
Sent from my SGH-T889 using Tapatalk 2
Sounds suspiciously like hardware, maybe main flex went bad and... well actually probably not as I think it would still vibrate. If you have debugging turned on and the proper drivers in pc the you can try a screen cast and see if you have anything, that or maybe some adb commands.
Also try another pc, one that it has never been connected to, see if drivers try to install
Sent from my MyTouch 4G Slide using xda premium
lifebound said:
There is no buzz because it wont even turn on.
It was on charge for about 10 minutes.
Yeah it does make an noise when i plug it in.
Yes.
And Yes
Click to expand...
Click to collapse
Ok. So it's not totally dead. (It's not necessarily recoverable, but it's not a full brick.)
A failed flex cable isn't out of the realm of possibility. You mentioned you were checking a text.
Did you open the keyboard, or hit the power button or trackpad?
GoPadge said:
Ok. So it's not totally dead. (It's not necessarily recoverable, but it's not a full brick.)
A failed flex cable isn't out of the realm of possibility. You mentioned you were checking a text.
Did you open the keyboard, or hit the power button or trackpad?
Click to expand...
Click to collapse
I Hit the trackpad i think. Once i pressed it i got an empty screen. I already tried using ADB commands but adb wont even recognize my phone once connected. I have tried refreshing the daemon servers multiple times still no detect. Its like out of no where i decided to die or something lol