Related
Ok I was flashing back to stock 2.1 useind odin when mid process my phone fell battery out usb disconnected and bam thats it. Now my phone is locked on a screen that shows a picture of a phone ! and a computer. I can get it back to download mode and odin will se the phone but gets no further then do not unplug device, my computer beeps when its plugged in but it dose not show the phone in my computer section. Any fixes or am i screwed?
PS phone is only two weeks old if need be could I take it back like this????
Hmm I think I may hove gotten past this problem. Uninstalled odin reinstalled and now it seems to be hopefully working
Here is the fix
I was in this same situation yesterday. Here is how to get it back into download mode.
•Be sure the Samsung USB drivers for the phone are installed on your computer.
•Remove and replace the battery.
•Connect the phone to the computer with the USB cable. The "phone-exclamation mark-computer" picture should display on the phone's screen.
•Hold the Volume Up+Volume Down+Power buttons down simultaneously.The screen should go blank, then the picture should appear again. When the screen goes blank a second time, release the Power button while continuing to hold the Volume Up+Volume Down buttons down
If that doesn't work,i had a similar problem where I could get into odin, but it would progress beyond the pit file. Take the battery, sim and memory card out of your phone. Start odin. Put the battery only back in. hold volume up and down. Plug the phone in while holding these buttons. Don't let go until you are in download mode. Now try restoring. It should work.
Thanks for the input i am back up and running!!
Sent from my SAMSUNG-SGH-I897 using XDA App
Bricked replacement Captivate - Orange Screen
Just to let you know. I recently received a replacement captivate thru warranty exchange. The phone was apparently a new one with JF6. So I decided to do an update to JH7 using Kies mini. A little over half way to the update procedure, the phone screen turned orange and stayed there for a long time, eventually I had to pull the plug. Of course I had to manually go to download mode and launch Kies mini emergency recovery, the damn thing again got stuck at the orange screen.
If anybody has this experience do no proceed further and throw that damn thing back at At&T's face. Do not attempt to do anything. I made a mistake of then doing an ODIN one-click back to stop and the phone got stuck half way, went to the orange screen.. and then it was over.. The phone was dead, wouldn't turn on, no recovery or download mode with any button combo. When I plugged in to the wall, no battery indicator.
save yourself the trouble and return the damn thing
still there
I am a "noob" to posting here, and a noob to the android due to being an avid iPhone user. I am having the same problem, phone -!- computer and have tried every method i can find in this forum to get passed it. Are there any other thoughts or suggestions? (got hung at do not turn off target in odin) Thanks in advance to any help.
I would look at this thread http://forum.xda-developers.com/showthread.php?t=1153310
Stephenv1971 said:
I would look at this thread http://forum.xda-developers.com/showthread.php?t=1153310
Click to expand...
Click to collapse
went that route, still cant find dl mode. have resistors built and all. any way i try to boot shows me the phone -!- computer, and the computer doesnt attempt to recognise it so there is no communication between the computer and phone. unfortunately, i dont have a v/ohm meter, so i am not sure of the accuracy of the resistors i used to make my jig.
I fixed this many times with phone that had the button download mode and didn't.
Getting into download mode while softbricked like this wont show the normal download screen. IT will still show the error screen....
With download mode working still:
Simply remove the battery and replace,
Open odin
Hold down volume keys and plug it in till you see odin recognize ur phone.
Then continue to use odin.
Dosent work, repeat.
If you know ur button combo dosent work:
Just open odin.
Remove battery & replace.
Use jig (3k 100k ohms twisted)
Then when the phone turns on and your see the pc! screen plug in usb.
See if odin sees it.
Assuming your flash didn't fail on the PBL.bin or SBL.bin you should be fine.
Follow the methods suggested by other users here and you will get back up and running in no time at all.
Don't sweat the 'phone-!-pc' screen. I'm a little surprised that no one has given you the good news....that is just a version of the download screen for later hardware revisions. It looks bad, but if Odin recognizes your phone (if one of the COM fields goes active), just start your flash again.
Now if Odin does not recognize the phone when plugged in via USB, then you have some more work to do.
I had forgotten about posting here, and my problem has been resolved. So here it is... I tried everything that I could find within this forum, almost. I built my own jig with inferior radio shack components that would not activate download mode, though it would turn the phone on. I got wise, spent 8 dollars at ebay and purchased a JIG there. Instant download mode after 3 days (shipping). Reflashed with one click, updated w/ kies, made kernal changes and am now rockin my captivate. Thanks to those who assisted.
Steve_O_1971 said:
I had forgotten about posting here, and my problem has been resolved. So here it is... I tried everything that I could find within this forum, almost. I built my own jig with inferior radio shack components that would not activate download mode, though it would turn the phone on. I got wise, spent 8 dollars at ebay and purchased a JIG there. Instant download mode after 3 days (shipping). Reflashed with one click, updated w/ kies, made kernal changes and am now rockin my captivate. Thanks to those who assisted.
Click to expand...
Click to collapse
Using the 3-resistor method takes A LOT of patience, at least in my experience. Glad everything worked out.
beast534 said:
Using the 3-resistor method takes A LOT of patience, at least in my experience. Glad everything worked out.
Click to expand...
Click to collapse
Patience is a virtue, and my Ex's name. LOL! I can do without patience.
Jokes aside, i actually soldered the resistors to a plug that i had cut up, and made sure it was covered so my skin wouldnt come in contact. The Radio Shack here buys inferior products and sells them at reggular retail. Unfortunately my $300.00 V-Ohm meter is on the fritz, and i have not had the time or money to replace it yet, but I have intentions to check the actual resistance of the jig I made. ^^
RESOLVED!
I have been on these forums long enough that if you violate protocol you get spanked but please resist if you can. I am out of ideas, I have the flu, I have a sick phone, I think this is the correct forum, I hope I have dotted all my I’s and crossed all my T’s. I have searched this forum and I have searched using Google.
Folks, I know there are dozens and dozens of "help me I've bricked my phone" threads. I have read and read and read but I can't seem to drill down to the exact issue I'm having. I used AIO Captivate Toolbox to attempt to install Cognitionv4.1.1.zip ROM on my newly updated to the official Froyo 2.2 Captivate. Having never seen the process before, but having been ROMing phones for several years it looked like it went ok. There was a progress bar on the phone as the file was downloaded, the phone restarted, and the screen displayed a gray battery alternating with a circular progress animation. Reading all the advice out there, and based on previous experience, I waited. And I waited some more. I went to watch a couple of TV shows and 90 minutes later it was doing the same thing. I pulled the USB, no affect; really nothing left I did a battery pull. When I returned the battery to the phone it went into a loop displaying the AT&T logo following by a black screen. Then I spent a few hours, seriously, trying to get the phone into the Download mode following what I read in the forums. I was unable to do the three button process so I cannibalized my Kindle USB to get a connector to make a jig. I had the resistors I needed to get the 301K I needed, soldered it all together and was able to get the phone in Download Mode. When I plug and unplug the phone I hear Windows make the sound it makes when it finds a USB device. I tried to use Odin to restore to factory, it said it was successful, the phone restarted, back to the gray battery and the spinning progress bar. Now when I run Odin, plug in the phone Odin doesn’t see the phone even though Windows does. Please, how can I get a working ROM on my phone?
Thanks,
Brian
U gotta give us the exact steps u took.
Number the steps u took
Sent from my SAMSUNG-SGH-I897 using XDA App
Have you tried one of the One click stock odins? Try that and see what happens
It might help you to note that that battery+spinner screen is what happens when you plug in the cable with the phone completely off - it's supposed to do that. This allows you to charge the battery with the phone off. You should be able to just press power and boot.
The boot might fail, but that battery screen alone isn't an indicator of any problem, it's just what's supposed to happen when your phone is off and plugged in.
This is assuming I'm reading your post correctly, of course.
I've had trouble getting Odin to work before, but never had it claim success and then be unable to boot (I've recovered from a complete soft brick twice now, yay DIY experimenting).
I just did a workstation restart, battery pull in the phone, put it back in Download mode with the jig, executed Odin, connected the phone and Windows sees it as a Samsung Composite USB device, hit start on Odin3, Odin returns this message and here it sits:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
Put your phone in download mode after connecting to USB and it should work
smokestack76 said:
Have you tried one of the One click stock odins? Try that and see what happens
Click to expand...
Click to collapse
I know there are more than one version of Odin, do I need to look for a specific one? Obviously I need one for the Captivate.
Burstaholic said:
It might help you to note that that battery+spinner screen is what happens when you plug in the cable with the phone completely off - it's supposed to do that. This allows you to charge the battery with the phone off. You should be able to just press power and boot.
The boot might fail, but that battery screen alone isn't an indicator of any problem, it's just what's supposed to happen when your phone is off and plugged in.
This is assuming I'm reading your post correctly, of course.
I've had trouble getting Odin to work before, but never had it claim success and then be unable to boot (I've recovered from a complete soft brick twice now, yay DIY experimenting).
Click to expand...
Click to collapse
When I first read this my jaw dropped. I was trying to remember if I tried powering on. Well Odin completed a moment ago and when I powered up it went back to the looping between AT&T and a black screen. If only were that simple.
when Odin fails you, you are doomed!
I'm kidding... but really... good luck
Look in the development section for an Odin 1 click, this will flash you back to stock... open Odin on your comp first...then plug in your usb and goto download mode, for me I have to take my battery out, plug in usb, hold both volume keys and insert battery while holding them...and then it goes to download mode and Odin sees it, its the only way I can get it to flash successfully, ...
As long as you can get into download mode, its not bricked... just finding the right combo can sometimes be tricky
EDIT
http://forum.xda-developers.com/showthread.php?t=731989
I'm trying to be nice, what you need to do is figure out if odin 1 click will work. Without that it will be very hard to recover.
I (we) fixed it! The link below had the combination of files and steps to make this bad boy boot up.
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
Thanks to all of you for any contribution. What pointed me the right direction was drilling down and searching for specific versions of Odin rather than "unbrick" my phone. It was that search that led to this link. Several folks above mentioned Odin, thank you.
What I didn't say in my original post, because I didn't want to sound any more pathetic than I already did was, I worked on this issue from noon yesterday until 2:00AM this morning. I was back up at 5:30 and worked on it pretty much continuously until now. I really do have the flu and I feel like crap, but the good feeling that comes with not having a bricked phone has been restored. I *know* you all understand. I am crawling back in bed where I should have been all along.
Thanks again!
Brian
I think my phone may be hard bricked.
I was trying to follow the steps in http://forum.xda-developers.com/showthread.php?t=1141550, when I ran into the situation I'm now in.
I followed all of the steps perfectly with the exception of rebooting to recovery, I accidentally rebooted normally. After it had started up and sat for about 5 minutes or so, I rebooted back to recovery. I reflashed the ext4 zip, then Black Ice ROM, and then Bali 3.1. I went to the voodoo menu and disabled both options and told the phone to reboot again.
It sat at the SGS4G screen for 20 minutes and I never heard linda speak during this entire time. I got tired of waiting and pulled the battery. Now the only thing I ever get is the SGS4g screen. I let it sit that way while I slept and when I woke up 3-4 hours later it was still on that screen. I've tried following the advice given in the thread mentioned above to put it back into download or recovery with no luck.
When I connect the phone to the PC instead of recognizing it, it complains about it and immediately makes the USB disconnect sound. If I leave it plugged in every 5-10 minutes or so it'll pop up the warning in the system tray again, and make the USB disconnect sound. If I unplug the phone from USB, the battery charging screen stays on. If I plug back in to USB at this point it'll make the sound like it's connected but never shows in Windows device manager, 'adb devices', or in ODIN. Any ideas before I call it a hardbrick and try to take it back to the store?
chadder said:
I think my phone may be hard bricked.
I was trying to follow the steps in http://forum.xda-developers.com/showthread.php?t=1141550, when I ran into the situation I'm now in.
I followed all of the steps perfectly with the exception of rebooting to recovery, I accidentally rebooted normally. After it had started up and sat for about 5 minutes or so, I rebooted back to recovery. I reflashed the ext4 zip, then Black Ice ROM, and then Bali 3.1. I went to the voodoo menu and disabled both options and told the phone to reboot again.
It sat at the SGS4G screen for 20 minutes and I never heard linda speak during this entire time. I got tired of waiting and pulled the battery. Now the only thing I ever get is the SGS4g screen. I let it sit that way while I slept and when I woke up 3-4 hours later it was still on that screen. I've tried following the advice given in the thread mentioned above to put it back into download or recovery with no luck.
When I connect the phone to the PC instead of recognizing it, it complains about it and immediately makes the USB disconnect sound. If I leave it plugged in every 5-10 minutes or so it'll pop up the warning in the system tray again, and make the USB disconnect sound. If I unplug the phone from USB, the battery charging screen stays on. If I plug back in to USB at this point it'll make the sound like it's connected but never shows in Windows device manager, 'adb devices', or in ODIN. Any ideas before I call it a hardbrick and try to take it back to the store?
Click to expand...
Click to collapse
Press and hold vol up and down and insert the usb cord that will get you into download mode..
You are at a softbrick.
RaverX3X said:
Press and hold vol up and down and insert the usb cord that will get you into download mode..
You are at a softbrick.
Click to expand...
Click to collapse
I've tried pulling the battery and putting it back in so it's fully shut down before holding the volume keys and connecting USB. It makes the USB connect sound and quickly makes the USB disconnect sound, gets the popup in my system tray saying it's an unrecognized USB device and doesn't go to download or a yellow triangle screen. Doesn't appear in ODIN or 'adb devices'. I've tried it this way repeatedly since last night.
I've also tried waiting until it's on the battery charging screen to pull the USB cable. It stays on the battery charging screen even though it's obviously not charging anymore. I hold the volume buttons anyways and plug the USB cable back in, and it makes the connect sound but it still never goes to download mode. I've tried it this way several times as well.
I've put my phone into download mode many times before so I can't imagine my method is wrong, I'm not doing it any differently than I ever have before. It's just behaving strangely. I've never had it stick on the battery charging screen before when I unplug the USB cable...
chadder said:
I've tried pulling the battery and putting it back in so it's fully shut down before holding the volume keys and connecting USB. It makes the USB connect sound and quickly makes the USB disconnect sound, gets the popup in my system tray saying it's an unrecognized USB device and doesn't go to download or a yellow triangle screen. Doesn't appear in ODIN or 'adb devices'. I've tried it this way repeatedly since last night.
I've also tried waiting until it's on the battery charging screen to pull the USB cable. It stays on the battery charging screen even though it's obviously not charging anymore. I hold the volume buttons anyways and plug the USB cable back in, and it makes the connect sound but it still never goes to download mode. I've tried it this way several times as well.
I've put my phone into download mode many times before so I can't imagine my method is wrong, I'm not doing it any differently than I ever have before. It's just behaving strangely. I've never had it stick on the battery charging screen before when I unplug the USB cable...
Click to expand...
Click to collapse
buy the download mode jig or make one.
chadder said:
I've tried pulling the battery and putting it back in so it's fully shut down before holding the volume keys and connecting USB. It makes the USB connect sound and quickly makes the USB disconnect sound, gets the popup in my system tray saying it's an unrecognized USB device and doesn't go to download or a yellow triangle screen. Doesn't appear in ODIN or 'adb devices'. I've tried it this way repeatedly since last night.
I've also tried waiting until it's on the battery charging screen to pull the USB cable. It stays on the battery charging screen even though it's obviously not charging anymore. I hold the volume buttons anyways and plug the USB cable back in, and it makes the connect sound but it still never goes to download mode. I've tried it this way several times as well.
I've put my phone into download mode many times before so I can't imagine my method is wrong, I'm not doing it any differently than I ever have before. It's just behaving strangely. I've never had it stick on the battery charging screen before when I unplug the USB cable...
Click to expand...
Click to collapse
check your pm.
Hey. I had the same exact problem. I couldn't get into download mode...and thus no odin. Look in the bible. There is a guide on how to get into download mode multiple ways. I used method 2. After that, follow the guide to flash using odin, also in the bible. hope you get it fixed.
Sent from my SGH-T959V using XDA Premium App
or u could try to reboot windows and see if you still get the usb error heaven forbid that it doesnt mess up lol
I had this exact same problem one day.... It is a soft brick i promise... I cant remember what i did to get into download but try everything you can. When i first flashed the bali 3.0 it did this too me. I was eventually able to get into download mode and reflash. Keep trying brother you will get it eventually get it.
Sent from my SGH-T959V using XDA App
farwek said:
I had this exact same problem one day.... It is a soft brick i promise... I cant remember what i did to get into download but try everything you can. When i first flashed the bali 3.0 it did this too me. I was eventually able to get into download mode and reflash. Keep trying brother you will get it eventually get it.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
HAH SUCCESS!! I finally got it into download mode by pressing ONLY vol down and power. Worked like a charm. Pressing both vol buttons is what was killing me. I got into download mode with Vol Down and Power, and then had to uninstall/reinstall my samsung drivers. Odin now sees my phone and I'm pushing KD1 as we speak. Thanks a million everyone. I love this forum. Thanks to all who helped.
chadder said:
HAH SUCCESS!! I finally got it into download mode by pressing ONLY vol down and power. Worked like a charm. Pressing both vol buttons is what was killing me. I got into download mode with Vol Down and Power, and then had to uninstall/reinstall my samsung drivers. Odin now sees my phone and I'm pushing KD1 as we speak. Thanks a million everyone. I love this forum. Thanks to all who helped.
Click to expand...
Click to collapse
You should probably flash KC1
Beefvvl said:
You should probably flash KC1
Click to expand...
Click to collapse
god people are still using that ginger release sigh wish it was gone.....
rootzrobot said:
vol. down and power means u were on gb bootloaders....and you most likely still are.
Click to expand...
Click to collapse
+1
[10chars]
RaverX3X said:
god people are still using that ginger release sigh wish it was gone.....
Click to expand...
Click to collapse
+1 on that. I wish penguin0609 would at least update the op of the issues with it or at least have mr clown close the thread and take the link out.
Ok heres the past 12 hours of my phones life. I instalaled Zeus V5 with the ICS theme, I flashed Entropy's latest daily kernel. I was setting up my phone back to what I had it at before I restored it. It was working perfect at about 3:00 AM CST. I plugged it in and went to sleep. When I woke up at about 11:00 AM CST. My phone was off. I assumed it just shut off so I tried turning it on...nothing. I tried the 3 button push and nothing. I then took my battery out and put it back and still nothing. I've tried removing the sd the sim and the battery and then plugging it in. I've tried DL mode in several different ways. I've used different computers, different cables, different wall outlets. No matter what I can't get a single thing to detect this phone and it won't respond to any amount of button pushes...So if anyone can help me fix my phone I will send you either 50 bucks through paypal or a 50 dollar giftcard. Please I'm begging you. Anyone please help.
Do you have a different battery you can use? Sounds like it might be the one you have in there.
do you get anything on your screen at all ?
$50 can be sent to [email protected] via paypal:
Here ya go buddy
http://forum.xda-developers.com/showthread.php?t=1116251&page=2
Instructions:
1) Make sure the drivers for the Infuse 4G are installed (installing Kies is the best way to accomplish this)
2) Download and unzip GTG's_Ultimate_Unbrick.zip
3) Run Odin3 v1.7.exe as administrator
4) Place your phone into download mode (pull battery, replace battery, press and hold both volume buttons while plugging in the USB cable)
5) Make sure your phone shows up in Odin as COM##
6) Click the PIT button and choose infuse.pit (and make sure Re-Partition is checked)
7) Click the PDA button and choose PDA_UCKD5.tar.md5
8) Click the PHONE button and choose PHONE_UCKD5.tar.md5
9) Press Start
Thanks to GTG!
It has to be your battery.
Sent from my SGH-I997 using xda premium
FauxAffliction said:
Ok heres the past 12 hours of my phones life. I instalaled Zeus V5 with the ICS theme, I flashed Entropy's latest daily kernel. I was setting up my phone back to what I had it at before I restored it. It was working perfect at about 3:00 AM CST. I plugged it in and went to sleep. When I woke up at about 11:00 AM CST. My phone was off. I assumed it just shut off so I tried turning it on...nothing. I tried the 3 button push and nothing. I then took my battery out and put it back and still nothing. I've tried removing the sd the sim and the battery and then plugging it in. I've tried DL mode in several different ways. I've used different computers, different cables, different wall outlets. No matter what I can't get a single thing to detect this phone and it won't respond to any amount of button pushes...So if anyone can help me fix my phone I will send you either 50 bucks through paypal or a 50 dollar giftcard. Please I'm begging you. Anyone please help.
Click to expand...
Click to collapse
Mine did this, but it was when I was messing with different ROM's and kernels, etc. It just plain shut off. Nothing would work, not the 3 button, anything. So I pulled the battery, put it back in and plugged in my jig I bought from Mobile Tech Videos, $8 at the time, and it went into download mode. From there I went to GTG's Ultimate Unbrick, and I was fine. Try it, if you have a jig. If it works, then cool, and you don't owe me a thing.
try following the GTG unbrick up above with the odin.
i recall a post a while ago from someone who had bricked their phone and it seemed to be like yours, and one of the responses was that even though the screen didn't show up as download mode, it was still connected and able to odin properly.
when you plugged it into your computer in download mode, did odin pick it up?
You guys don't pay attention to what you read. He said, Nothing comes up on the screen and he can not put it on DL mode.
I would try getting a battery or if you know someone with an infuse, barrow the battery and see if that works. If that doesn't work, try the Jig. I'm sure with the JIG you will be able to bring back your phone from SOD...
GL
Ok guys, took it to AT&T and the guy tried like 4 new batteries. It is NOT the battery. He doesn't know what's wrong with it but then again I didn't tell them about the ROMS or rooting(duh) there is not physical or water damage at all. Anyone else??
drivel2787 said:
$50 can be sent to [email protected] via paypal:
Here ya go buddy
http://forum.xda-developers.com/showthread.php?t=1116251&page=2
Instructions:
1) Make sure the drivers for the Infuse 4G are installed (installing Kies is the best way to accomplish this)
2) Download and unzip GTG's_Ultimate_Unbrick.zip
3) Run Odin3 v1.7.exe as administrator
4) Place your phone into download mode (pull battery, replace battery, press and hold both volume buttons while plugging in the USB cable)
5) Make sure your phone shows up in Odin as COM##
6) Click the PIT button and choose infuse.pit (and make sure Re-Partition is checked)
7) Click the PDA button and choose PDA_UCKD5.tar.md5
8) Click the PHONE button and choose PHONE_UCKD5.tar.md5
9) Press Start
Thanks to GTG!
Click to expand...
Click to collapse
Doesn't go in to DL mode...try again.
Based on the description, since it had a functional ROM and died later on not in the middle of a flash:
1) Battery dead as a doornail - I BELIEVE that with certain types of jigs (potentially not the standard one) the device will turn on without a battery so this could be confirmed. If so, you might be able to fix it with a new battery OR topping off the battery in an external charger.
2) Total hardware failure of some sort, highly likely going beyond a brick. (e.g. even if you JTAGed a good bootloader it would still be dead - probably because the bootloader is still good.)
Entropy512 said:
Based on the description, since it had a functional ROM and died later on not in the middle of a flash:
1) Battery dead as a doornail - I BELIEVE that with certain types of jigs (potentially not the standard one) the device will turn on without a battery so this could be confirmed. If so, you might be able to fix it with a new battery OR topping off the battery in an external charger.
2) Total hardware failure of some sort, highly likely going beyond a brick.
Click to expand...
Click to collapse
I went to an AT&T store and the guy tried several batteries. How could it be hardware when all it was doing was charging...While I was asleep and not touching it at all.
you can try reading this.
http://forum.xda-developers.com/showthread.php?t=1336359
qkster said:
you can try reading this.
http://forum.xda-developers.com/showthread.php?t=1336359
Click to expand...
Click to collapse
this exactly!!... take your time ..do it right...you can do it....
o wait thats a song!!!
but seriously ..read it ALL!! and follow instructions very carefully ..i had to download ubuntu.. my phone "died" just a blank screen and this got me back!!!
good luck !!
Like I stated before. Mine did the same thing. Black screen, no power, 3-button didn't work. My jig popped in into download mode, and GTG's unbrick from there. I leanred a long time ago, to always have my jig with me. Love my jig! Thanks MTV! best $8 I ever spent.
I'm sure you tried this but I actually never use three buttons to get into download mode. I just insert the battery, hold down the two volume buttons and, while holding the buttons, I plug in the usb that's plugged into the computer. Flame me if this is obvious but I didn't see anyone suggest it.
hey faux ..how long have you had this phone and how long have you been with ATT?
JUST MAKING SURE... You have kies installed on your computer right???
Sent from my A500 using Tapatalk
Had the phone about 6 months...att for 3 and a half years. IDK what "Jig you're talking about or else I might try it if I can easily get one today and it doesn't have to be shipped. I'd rather not try the unbrickable thing because my phone as of right now is in warranty I'd rather not void it. And yes I did the two button DL mode. Not 3.
Erik_T said:
JUST MAKING SURE... You have kies installed on your computer right???
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
Yes I do have it installed.
Im trying to explain everything to prevent unneeded questions
I have viewed several threads about this but absolutely none with an answer. My Samsung Infuse 4g with at&t (nonrooted) is in a bootloop. The cause of this was my every-other-day reboot. Once I turned it back on it goes to the samsung screen for about 5 secs, then goes black, then says samsung again and so on repeatedly. I pull the battery and as soon as it makes contact back with the phone it turns on by itself into the same Samsung screen over and over. When plugged into wall or computer it will show the charge screen where there is no battery life left, then it will flash and start up the charge screen again and so on just like the samsung screen. I cannot go into download mode (the buttons, at this point, do nothing. No response)
I have tried taking the battery out and plugging in usb cable to computer, then holding both volumes and putting battery in=charging loop
↑ with volume up=charging loop
↑↑ with volume down=charging loop
computer doesnt detect it, adb cant find it, cannot go into download mode, odin cant see it, heimdall cant see it, cant actually boot into anything, cant leave battery in or else phone will restart itself the entire time, and this was caused by my (already gbread) infuse 4g doing a regular reboot (aka power button, tap power off, after phone is confirmed off take battery out, battery back in, turn on)
Recommendations at this point? on a scale from 1=noob to 10=expert im a 7 on this type of thing. Ive always heard that as long as you can boot into a picture its only soft bricked but if i was right i wouldnt be here. Any and all help would be much appreciated. If you need me to post a video I would have NO problem doing that showing everything im doing.
oh, and by I have viewed several threads about this i meant that i have only been able to find 1 thread about it and 2 links that didnt work for me but might for you
link that worked- http://forum.xda-developers.com/archive/index.php/t-1354731.html
links that did not-
http://www.google.com/url?sa=t&rct=...ih1Zf_BvtcIbJXGEw&sig2=jjOcukFWr9sPWJZH1rlhnA
http://www.google.com/url?sa=t&rct=...ih1Zf_BvtcIbJXGEw&sig2=SZeMzIF2hnjdkk6GPDkovg
You might have already tried this way, but I've always held down both volume buttons first before plugging in the USB cord - not the other way around. You can also try different cords, different USB ports and/or different computers.
Mine was doing this the other day and it turned out to be my SD card being flaky. Maybe try taking it out and booting?
Radiotsar said:
You might have already tried this way, but I've always held down both volume buttons first before plugging in the USB cord - not the other way around. You can also try different cords, different USB ports and/or different computers.
Click to expand...
Click to collapse
Ive tried a hp touchpad cord, an atrix cord, and the original cord. I cant really do the button combo because as soon as the battery makes contact the phone turns on. thats why i had the usb cord in first to see if it worked. ive tried every usb port and 2 different laptops, the computer wont recognize it if the phone wont go past the samsung start up screen
J101 said:
Mine was doing this the other day and it turned out to be my SD card being flaky. Maybe try taking it out and booting?
Click to expand...
Click to collapse
I've taken the card out and used a different card, nothing. Tried taking sim card out, nothing.
I should have been clearer. Leave the battery out of the process until after attaching the cord and the screen coming up.
Sent from my SGH-I997 using xda premium
Radiotsar said:
I should have been clearer. Leave the battery out of the process until after attaching the cord and the screen coming up.
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
I do, every time.
1. battery out
2. hold down volume buttons (any combo)
3. attach cord (nothing happens, no screen, nothing)
4. put battery in
Results= Charging loop
lifetaker said:
I do, every time.
1. battery out
2. hold down volume buttons (any combo)
3. attach cord (nothing happens, no screen, nothing)
4. put battery in
Results= Charging loop
Click to expand...
Click to collapse
should be the same...wonder if you battery needs to be charged first, it should be fully charged at best...to do any flash/Odin/one click
this how I do it...basicly the same..
>take batt out
>plug in usb cable...to both phone and computer
>hold both volume buttons...NO NOT HOLD THE POWER BUTTON....
>put batt in...
and bam should see the android dude shoveling in yellow triangle...
If you get no response from the usb without the battery, and inserting the battery indicates the battery needs charging - I'd suspect the phone's usb port. Especially after trying different cords & computers.
Sent from my SGH-I997 using xda premium
Sorry for the sometimes choppy video recording.
http://www.youtube.com/watch?v=QWKdGS_5_Ps&feature=youtu.be
Have you tried a jig you can buy them on ebay for 6-12 bucks or you can donate one of you old cables and make it your self..
http://galaxys2root.com/galaxy-s2-hacks/how-to-make-a-usb-jig-for-your-galaxy-s2/
this will/should get you into download mode
Hello.
I have the same problem... tried also everything now i gave it to cellphone shop, i hope you guys can give me answer before i am gonna waist $100
HELP?1
Help me please
I was in this state. There are two options I can think of. A JIG as mentioned previously or the Heimdall One-Click-Unbrick. The one-click unbrick did it for me and got me back to cmw and download mode, then i could flash to stock, root and flash up to ICS. It was really easy and I stopped sweating once it booted to cmw instantly after running it.
Joe
hello.
The problem is when i connect it to my computer its keep disconnecting and doing terreble noise, (windows noise) when you keep connecting and disconnecting USB cable
JIG DIDNT WORK, because the same problem.... maybe the chargging connect is broken? or has a corrosion?
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Thanks ✟
Moving to Q&A
Sounds/Looks like a hardware issue...
Did it get any water damage in the past?
Hope you got warranty or still under warranty.
I am having exactly the same problem. My Infuse has never been rooted or unlocked (quite ironically, I was about to root it for the first time).
Boot loop when not plugged in, charge loop when plugged in. Absolutely no combination of buttons, inserting/removing the battery, and/or plugging/unplugging the USB has gotten it to do anything.
This has happened several times over the past few days. The first few times it sorted itself out in an hour or two. Today I couldn't get it to do anything at all.
I found several posts by people who have this problem, and it has never been conclusively solved from what I've seen. Finally one person said they fixed it by lightly smacking the phone with their hand. Lo and behold, it came on for about 5 minutes before looping again. So I smacked it again, and before it could re-loop, I factory reset it. A few hours went by and I was convinced that it was fixed.
A few minutes ago I had it plugged in to my computer via USB and was getting ready to SuperOneClick it. Then it went back into loop. I can't get it to come on this time. Again, no combination of buttons will send it into download mode. The computer can't see it. The battery is charged. The USB cable and port are fine. The software was reset earlier today. Does this mean that I have a hardware problem, or is there a software issue that could be fixable?
EDIT: So I decided to try hitting the power button, something that had never worked to this point, and the device came on. A couple minutes later it went back to boot loop. On a whim I tried download mode, which had stubbornly refused to work all day. Of course it immediately worked. Not really knowing what to try, since I'd already wiped user data, I wiped cache data and formatted the internal SD. Then I told it to reboot. Back to boot loop. A few minutes later, it came back on with the power button. Two minutes later, boot loop again. Then it restarted of its own accord. And now back to boot loop. I just don't even know anymore.
EDIT2: Just a thought... Something is weird with the power button. Whenever the phone is on and I hit power (briefly, not holding it down), it goes to the shutdown menu as though I'd held it down. A few seconds later, I'm always back in boot loop.
Infuse loop
I have found the problem. It is, in my case, the power button. I removed the case and crossed terminals with a paperclip. BAM. Booted up, and when I removed the paper clip.... back to boot loop at Samsung logo.
There is a place to send the phone. Ive see great reviews.
mobiletechvideos.mybigcommerce.com/samsung-infuse-4g-power-button-repair/
Seems like there has been a string of power button malfunctions going around lately. There are a few threads going on where people have had this issue. Sometimes its just the terminals needing to be cleaned or dust blown out.