Hi all,
A friend recently gave me a Lowepro Tasca 30 (http://products.lowepro.com/product/Tasca-30,2108,25.htm) basically a pouch that claims to hold small gadgets - cameras, HDDs, phones etc.
Was playing around with it and it fits the HTC Desire quite nicely... a tad large, but good enough to protect the phone etc.
However, the way the pouch "closes" is there are two magnets near the top to keep the pouch closed - they feel fairly strong (keeps the pouch closed well)
I was wondering is it ok for the HTC Desire to pass the magnet each time I take it in and out? I've realised i can attempt to keep the pouch open, but often the magnets 'snap' together right at the end when I pull the phone out.
Thanks!
the magnets shouldn't effect the desire.
anyway, if the case can hold HDDs, then the magnets shouldn't be harmful at all.
kuobob said:
the magnets shouldn't effect the desire.
anyway, if the case can hold HDDs, then the magnets shouldn't be harmful at all.
Click to expand...
Click to collapse
yeah that was what i was thinking.
but was under the impression that gadgets + magnets are not a good combination. (in particular HDDs)
or does the magnet have to be super super strong to be bad for the device?
pyko said:
yeah that was what i was thinking.
but was under the impression that gadgets + magnets are not a good combination. (in particular HDDs)
or does the magnet have to be super super strong to be bad for the device?
Click to expand...
Click to collapse
I have an official HTC leather side holster for my Desire. It uses two magnets to hold the flap shut to secure the phone. I've been using it since January this year. No problems encountered.
I remember a discussion back in my Iphone Classic days, where they said, that the magnets does have an impact to the internal flash memory.
Don't know if this is right.
I used to have an Xperia X1.
I remember people over the forums complaining about holsters with magnets causing the X1 to think that the keyboard has been slid open even if it wasn't. I kept my X1 in a holster with a magnet too..but never experienced the said issue. Maybe it has something to do with the strength of the magnet(s) used.
My pouch also has magnets, have had it for as long as I had the phone (1 year) and never had problems.
Not had any issues using a pouch with a magnet that holds the pull-out strap in place. I believe it's just HDDs that are a bad combination with magnets, and the Desire doesn't have one.
The only ill effect I encountered from using a case with a magnetic clasp was that the compass always pointed towards the clasp itself.
Also it's a bit of a myth that magnets can damage hard drives - a principal component inside a hard drive is a large powerful magnet! It'd have to be insanely strong to cause problems.
I use the oem pouch which has a magnet too, so I think no harm can be done from it.
I had one for almost 3 years with a Sony K800i.
The pouch died earlier than the phone itself. So in my opinion it really can´t do any harm.
Same here.
I've been using magnet pouch ever since I started using a mobile phone.
No problem ever occured with all of my phone I've ever used.
magnets should not affect mobile phones ...
---------- Post added at 06:35 PM ---------- Previous post was at 06:31 PM ----------
ayazora said:
Same here.
I've been using magnet pouch ever since I started using a mobile phone.
No problem ever occured with all of my phone I've ever used.
Click to expand...
Click to collapse
yep, modern tech should not be affected by magnets
For what I know magnets can't harm the phone itself. However magnets can harm the display (only for LCD not OLED), but it has to be an insanely strong kind of magnet. Like the ones used in HDDs.
Don't think any kind of pouch can do damage to your device unless it features freaking electromagnets
Don't forget about vibrations. Those magnets damaged it in my Desire. At least i assume that was the cause. Vibration module has been replaced when i gave phone to replace broken glass.
Nevertheless I'll check this again. HTC says if i remember correctly that magnets won't affect device. It is still on warranty so that won't be a big problem.
All mistakes in post will be corrected when I'll sit in front of the computer.
Sent from my HTC Desire using xda premium
Magnet?
The phones normally start singing country and western music ...
What is your problem? Is that impossible to break electric engine using magnets? If for you it is then start learning physics again.
Sent from my HTC Desire using xda premium
HTC phones, pouches, and magnets
My HTC TouchPro 2 phone has an internal magnetic switch that determines its horizontal or vertical position to orient the screen display. When the screen display is locked and turned off, waving the phone near the magnetic clasp on my belt pouch can turn it on and unlock it. If I don't notice this, random pressure on the screen while it is in the pouch can cause all sorts of mischief -- repeatedly dialing a phone number; adding a contact to my address book multiple times; entering garbage text into an email message; depleting the battery quickly. These mysteries had me baffled for some time, until I figured out how to reproduce the problem consistently with the magnetic clasp (or any other magnet).
Does anyone make a decent nonmagnetic pouch? One made of hard plastic which the phone snapped into, broke fairly quickly. The generic velcro-closing pouches I have found are bulky and awkward. Do Verizon and HTC simply choose to ignore this problem? Do newer HTC phones not use the internal magnetic switches or insulate them from external magnetic fields (if that is possible)?
Related
I'm about to buy a GPS receiver from eBay (new), but I'm not too sure on the "magnetic windscreen mount" that comes with it.
Most of the time, you should keep magnets away from electronic devices due to the damage they can cause, but in this scenario should I be concerned?
I had a magnetic holder for my old MP3 player and it caused one of the components to lift far enough off the PCB for it to lose contact. I will admit though, the magnet I had was obviously too powerful - the casing on the back of the MP3 player used to bend outwards. I just can't afford any damage to happen to my XDA 2.
I got a TomTom kit from ebay arrived today (purchased from Uncle_sam) the holder is very flimsy, it broke in my hand and is now useless. I was also supposed to receive a leather case, clip and speed camera detector BUT NOTHING.
Beware this seller!!!!
Having said that the TomTom is pure excellence.
Matt
I have ysed the magnetic holders with xda1 and xda2, works perfectly, just a small very thin plate of metal sticks to te back of the xda and it holds firmly to the magnetic mount on the windscreen, I have had no adverse effects and in my view this is one of the best ways of mounting a pda, the bonus with the xda2 is that you can film stuff from the car as you go along.
Where did you get the magnetic holder from?
Hi,
I brought a magnetic holder at the same time i brought my GPS mouse and chargeing lead from PDAMODS.COM
The magnetic holder is excelent. I have been using it for a long time. As metoined above you get a little metal plate to stick to the back of your device so it has something for the magnet to stick to. However i thought sticking it on the back may make it look a bit ugly. I instead removed the sticky coating and put it under the battery cover. I had to just make it a bit narrower by rubbing it on a knife sharpening stone. This let it fit perfectly and the XDA II looks no different.
The good thing about the mag mount is it is very small and compact, and very quick and easy to place and remove the XDA II.
Thanks for the info - I think I'll treat myself to one of those.
pasive magnets dont kill eletronics like eletro magnets does
because of 2 things
they are in general not as strong
and their field dont variate like electromagnets does
links about magnets
http://www.dansdata.com/gz009.htm
http://www.dansdata.com/magnets.htm
I use this mount ......
http://www.gpsw.co.uk/details/prod1313.html
It's absolutely excellent !! and at £10 who can grumble!! I bought two, one for my wifes car as well!
Thats the one i have to and its cheaper than pdamods.com.
Another thing i forgot to mention in my earlier post is the suction is really good. I know a lot of suction mounts can have problems with falling off but this one has never done that yet to me
Wow, thanks for that. I might just do the same.
and there was me thinking that lith-ion batteries can be damaged by magnetic holders??
I just bought this new car holder two weeks ago and I have to say it's awesome! I've had two car holders before this, one giant universal one that was ugly and broke really quick, and a SGS specific one bought off Ebay that scratched the backplate and was no good.
I saw this at a local store last week and decided to give it a try, it's a universal mount that holds using an adhesive pad, but the pad leaves no residue or stickyness on the phone it just holds the phone, and then when you pull it off it comes off. My phone has never fallen off and one time just for fun I tossed the phone at it lightly and it stuck, thats how sticky this thing is.
The best part is once it starts to lose its stickiness due to dust, skin etc you just rinse it out and start over again.
(I don't have any pictures right now but heres the website)
http://www.clingo.com/
bigc_13 said:
I just bought this new car holder two weeks ago and I have to say it's awesome! I've had two car holders before this, one giant universal one that was ugly and broke really quick, and a SGS specific one bought off Ebay that scratched the backplate and was no good.
I saw this at a local store last week and decided to give it a try, it's a universal mount that holds using an adhesive pad, but the pad leaves no residue or stickyness on the phone it just holds the phone, and then when you pull it off it comes off. My phone has never fallen off and one time just for fun I tossed the phone at it lightly and it stuck, thats how sticky this thing is.
The best part is once it starts to lose its stickiness due to dust, skin etc you just rinse it out and start over again.
(I don't have any pictures right now but heres the website)
http://www.clingo.com/
Click to expand...
Click to collapse
This is some pretty neat stuff!!!
Looks awesome.
Just bought one of eBay
I would like some more reviews for this it looks very interesting will it also hold with an invisibleshield attached to the back or is it slippy then? I don't want my phone to fall off while driving it could cause a lot of damage to my phone
webcrtor said:
I would like some more reviews for this it looks very interesting will it also hold with an invisibleshield attached to the back or is it slippy then? I don't want my phone to fall off while driving it could cause a lot of damage to my phone
Click to expand...
Click to collapse
+1
I'd like to know how sticky the sticky bit is as the roads over here are atrocious, I don't really want to have to fish the phone out from under the pedals while doing 100kmh
I like the idea of these but i don't think i'd ever trust it to hold the phone properly
I have seen a video of someone going over speed bumps and the phone stayed attached but i'd rather go for something that i know would be sturdy due to the holder. Just my opinion.
Got mine the other day.
Where I'm living at the moment there is road crew everywhere screwing with the roads. Potholes raised bits in the road. Suffice to say the roads are f'ing terrible.
And this thing will not let go if it at all. After driving around for about half an hour it was actually quite difficult to get my phone off the holder.
Driving around there is very little vibration in the phone, all the joints in the holder are very firm without being a ***** to use.
Overall im very impressed
As an extra test, I just went on a 600km road trip on Monday and it held my phone the entire time, I love this thing
For those who don't believe in Clingo I must say that it takes me two hands to take my SGS off of it. It is STICKY.
When you remove the phone off the holder does it make the back of the phone all weird and sticky?
And will it stick to a phone case? the case has a smooth and a bit of rubbery feel to it
I bought one of these also and found it to be very good.
You just have to watch out for the bump on the bottom of the SGS in positioning the phone during sticking.
I had one of these for a while but have now switched to a holder that my SGS just slots into.
It doesn't leave any residue on the back of the phone. It doesn't work too well with leather cases as it likes a nice smooth surface for maximum attachment and a word of warning, it can lose some of its 'strength' if the sun is baking your car all day. Even in England where we just get ****e weather, last summer mine dropped off a couple of times whilst driving which is why I ditched it.
And one final tip, get a retractable car charger because you can then 'set the slack' in the cable so that it does not pull on the phone. Curly cords can cause the phone to work itself loose as they always try and retract into their original shape. Plus retractable chargers are neater too.
I use the i9000 specific one from Ebay (dealextreme actually). I've hacked it a bit:
- shortened the bit that goes over the phone so it will push less hard
- removed some sharp edges that could scratch the phone
- removed the bendy bit and glued the phone holder and suction parts together at a near-right angle
and most important of all:
- stuck a PU anti slip mat under the suction cup and cut to size (a tad larger than the original suction cup). Now the suction cup also sticks to the dashboard
Those PU mats are like the Clingo backside I suppose. But a lot less expensive. The grip is very good (too good?) as I wanted to remove it from the phone and I was afraid to pull off the back cover. I'm happy I only stick it to the dash
TieNN89 said:
When you remove the phone off the holder does it make the back of the phone all weird and sticky?
And will it stick to a phone case? the case has a smooth and a bit of rubbery feel to it
Click to expand...
Click to collapse
I dont have a case on my phone so I can't comment on that part.
But it does not leave any sort of residue at all. comes of perfectly clean.
Quick update (hope this doesn't count as necro posting) The holder got dusty, started losing its grip, I rinsed it off and the next morning when it was dry it was as sticky as it was when I first started using the holder. Much more time down the road and this is still a great holder.
I'm interessed in it also, but...
The hole of speaker sound, is not covered by clingo??
Because when i'm using satnav/GPS apps i need to listen, but if clingo is above the hole the sound doesn't come out...
Can someone say something about this, please...
Sncrespo said:
I'm interessed in it also, but...
The hole of speaker sound, is not covered by clingo??
Because when i'm using satnav/GPS apps i need to listen, but if clingo is above the hole the sound doesn't come out...
Can someone say something about this, please...
Click to expand...
Click to collapse
All you would need to do is place it on the holder so that it isn't covering the speaker hole when you stick the phone to the clingo holder. You can stick it anywhere you want on the phone so it's only a matter of placement
Only caveat is that smooth/velvety materials don't stick well. My HTC EVO stock battery case doesn't stick for long, and the Seidio active innocase is too smooth to stick. Works great on a stock iPhone and my HTC Universal. Holds that one hard enough to pull the battery cover off!
My concern is will it rip off my invisible shield when I try to take it off the mount. I can see the adhesive pulling the film right off the back of my phone.
I've got this for my Samsung Galaxy S II, and it will almost *always* remove the battery cover due to its grip when trying to take the phone off. Good and bad
I haven't seen any posts for DHD in regards to this and since this barnd is the most advertised and most positive-commented, I'd like to add my negative comments so that everyone is aware.
First of all, before I bought it, I've read the best comments about it as being the best choice. For me, it was the worst product I could buy and at such a high price which cannot be explained. This is why:
1) Hard to slide in and once in its place, the phone is so firmly fixed in the holder that you need tools to remove it. I always end up fighting with it to get out and the result is that always the sim cover gets off and stays fixed in the holder. The sides of the phone also start showing wear/scratch signs. This is the most unacceptable problem for a priduct of that price.
2) The provided proclip (special mount for specific car model) for one of my cars doesn't stay fixed on my car. It is so long and so thin and its corners are so badly aligned that even the adhesives don't come in contact with the console plastic and each time I try to take my phone off the holder, the whole mount comes off. With my other car for which the mount is smaller, it's ok bad still unacceptable for the price I paid overall.
Having read this, don't buy this product.
Thats a pity; I've been using a generic suction-cup mount in my car but was planning on purchasing a Brodit as I'd had no problems with the previous one I had for my Touch Pro 2.
I had a similar problem with the car mount half of it; it was supposed to mount over the air vent but would 'slip-off' if you hit a bump on the road. I fixed this with a heat gun, bending the mount to give it a firmer grip.
If the Brodit mount is a bad idea for the Desire HD, can anyone recommend a better option for the car than a clunky generic plastic lump I've got attached to my windscreen?
I bought a Brodit Active Holder for my DHD and I've had no problems fitting and removing the phone from it. If anything, when I slot the phone into place, there is a bit of a gap between the bottom of the phone and the holder so you can see part of the cable connector has not fully gone into the phone. Still charges though, just looks a bit irritating.
Other than that Im pleased with it, no fit or removal problems whatsoever
Reckless187 said:
I bought a Brodit Active Holder for my DHD and I've had no problems fitting and removing the phone from it. If anything, when I slot the phone into place, there is a bit of a gap between the bottom of the phone and the holder so you can see part of the cable connector has not fully gone into the phone. Still charges though, just looks a bit irritating.
Other than that Im pleased with it, no fit or removal problems whatsoever
Click to expand...
Click to collapse
Where have you bought it from? because I received a message today from the Swedish manufacturer who admit this as a problem with some of their stock.
andreasy said:
Where have you bought it from? because I received a message today from the Swedish manufacturer who admit this as a problem with some of their stock.
Click to expand...
Click to collapse
Sorry to hear that, you were unlucky. I bought mine off eBay Uk last week. It was a Uk seller called drivesafeandlegal2. I dont have enough posts to post a link unfortunately. I done a search under 'brodit desire hd'
Free delivery and package arrived in a couple of days.
For those who bought the Brodit carholder and its to tide ( like antenna cover gets stuck) you can solve it.
Take sandpaper with a very tiny grain and start sanding the edges of the sides. Make the sharp edges round and sand it with some water so that the surface and edges gets smooth ( even more smooth then original).
After this is done you don't see a difference in color or you don't mess up your holder as long the sandpaper is a P400 or lower and apply water in the end.
Mine looks like new and phone slides in without pushing until it reach the usb port.
No fuss with antenna cover and much more safe scratching your phone.
I purchased one of these to hold my phone and was sick of changing mounts every time i got a new phone.
http://www.exogear.com/products-exomount-car-mount-holder.html
Its basically a normal suction mount with a little bit of a sticky surface that does not come off on anything. The DHD fits fine and i haven’t had it fly off or wobble as i am driving or turning (and yes i turn sharp at high speeds).
This is probably (apart from a proclip) one of the best universal mounts i have used. The proclip is my choice as its solid and fixed but requires work, this on the other hand is my second choice as i can stick it anywhere in my car and have it suck down without leaving a mark and not have to mess around changing clips.
Features:
•Exomount’s patented suction technology enables you to mount on almost any flat surface such as car dashes, glass, wood, metal,
plastics and even drywall!
•Polyurethane lined grip keeps your phone or GPS safe and secure
•Quickly and easily mount and unmount your phone or GPS with our stylish clip grip holder
•Mounts all smart phones and GPS devices up to 5-inch screens
•Multi-angle rotation for your preferred viewing angle
cheers for the thread
does anyone use this with an otterbox (or similar) case? I'm thinking of buying one of these as there is zero options available for a DHD with a case
also any issues with the patented stick technology or whatever its called becoming not so grippy after x weeks/months?
Try slipgrip mounts for otterbox cases. You can find it on ebay also.
pappas99 said:
cheers for the thread
does anyone use this with an otterbox (or similar) case? I'm thinking of buying one of these as there is zero options available for a DHD with a case
also any issues with the patented stick technology or whatever its called becoming not so grippy after x weeks/months?
Click to expand...
Click to collapse
Non mine is still sticky now, i don’t think it is supposed to be super sticky as the gel and stick i think improves the suction. I just purchased another because they are pretty good and it doesnt need to be on a flat surface to work at all.
I've read that vibration might be an issue... we have very bumpy roads where I'm at so I wouldn't like it to be all over the place...
Any further info about this please?
BuZzCoRe said:
I've read that vibration might be an issue... we have very bumpy roads where I'm at so I wouldn't like it to be all over the place...
Any further info about this please?
Click to expand...
Click to collapse
I think there is a video review which says this but i have tried this on a Samsung Galaxy S2, Iphone4,Desire HD and Sensation and it is perfectly fine on bumpy roads. The clamp is strong enough to hold it. You will get the same jigger on say a tomtom or any other mount.
The reason why the clamp is the size it is, so when holding onto phones it doesnt press any buttons on the side of the phone.
Quality isnt that bad for its price and i would think its the best universal mount i have used in a car, i have used many mounts but this one has lasted the longest and seems very promising.
You can even rotate it and mount a tablet in your car!
I have ordered mine from eBay.. will post report as soon as I receive the delivery...
Sent from my Desire HD
I'm a new user of it too, and love it !
Question for you:
Since my dash is not completely straight so I can't put it there (even so it lasts about 1 day), I'm putting it on the windshield, but the arm is so short that I can't find a good place for it.
I put it meanwhile just a lil bit below the mirror, but on a way that the top of the phone is kinda behind the mirror, otherwise its too far and too hard to reach it.
I tried many other places but none was good enough.
Its or too far or blocking the road.. :\
Where do you put it? and where do you suggest me to put?
Thanks,
Yarden.
what a piece of junk! i tried it last night and couldn't find ANY spots in my car (newish 2004) where it would stick! I haven't tried the windshield yet. It literally would stay in place a few seconds then fall. did anyone else get this? perghaps i installed it wrong. is it just a case of taking the white ring protector off the stick part then putting on a surface? or did i not do something?
I wonder how safe this would be if mounted on dash and you break suddenly.
pappas99 said:
cheers for the thread
does anyone use this with an otterbox (or similar) case? I'm thinking of buying one of these as there is zero options available for a DHD with a case
Click to expand...
Click to collapse
Try Herbert Richter universal mounts if you're still after an option to use with otterbox case.
I've had mine for several weeks now.
It sticks everywhere.
I use mine with a Otterbox Commuter Case and it fits well.
Vibration is a small issue, though.
the Herbert Richter universal mounts is bulky with the arm, the exo gear mount is good btu if the clamp had a few extras to secure it better it would be 10/10
A|ex said:
I purchased one of these to hold my phone and was sick of changing mounts every time i got a new phone.
http://www.exogear.com/products-exomount-car-mount-holder.html
Its basically a normal suction mount with a little bit of a sticky surface that does not come off on anything. The DHD fits fine and i haven’t had it fly off or wobble as i am driving or turning (and yes i turn sharp at high speeds).
This is probably (apart from a proclip) one of the best universal mounts i have used. The proclip is my choice as its solid and fixed but requires work, this on the other hand is my second choice as i can stick it anywhere in my car and have it suck down without leaving a mark and not have to mess around changing clips.
Features:
•Exomount’s patented suction technology enables you to mount on almost any flat surface such as car dashes, glass, wood, metal,
plastics and even drywall!
•Polyurethane lined grip keeps your phone or GPS safe and secure
•Quickly and easily mount and unmount your phone or GPS with our stylish clip grip holder
•Mounts all smart phones and GPS devices up to 5-inch screens
•Multi-angle rotation for your preferred viewing angle
Click to expand...
Click to collapse
Alex, Mind to share what is the quality like?
pappas99 said:
what a piece of junk! i tried it last night and couldn't find ANY spots in my car (newish 2004) where it would stick! I haven't tried the windshield yet. It literally would stay in place a few seconds then fall. did anyone else get this? perghaps i installed it wrong. is it just a case of taking the white ring protector off the stick part then putting on a surface? or did i not do something?
Click to expand...
Click to collapse
yes. take the white protector bit off, its that sticky bit that helps it stay stuck to the surface, im surprised the suction bit worked at all with that thing still on lol
---------- Post added at 05:25 PM ---------- Previous post was at 05:22 PM ----------
zane222 said:
Alex, Mind to share what is the quality like?
Click to expand...
Click to collapse
The quality feels like it is kinda flimsy, but after using it, it feels tough.. i used to be kinda careful with it but these days i just grab and twist it and it definitely doesn't feel like it's gonna fall apart.
The ball bit that it rotates on did get a bit dirty on mine and it got quite hard to rotate it, but just clean the bit of it you can see (no need to take apart) and then it should be all good again. That's only happened once to me, and i literally just wiped with a dry finger and wiggled it about a bit and its fine again.
I was JUUUUST about to buy one, but because I live in Australia, shipping + handling is $49 alone!
Does anyone recommend any other mounts, without the massive shipping charge?
Apart from ebay cheapies.
jaysinclair said:
I was JUUUUST about to buy one, but because I live in Australia, shipping + handling is $49 alone!
Does anyone recommend any other mounts, without the massive shipping charge?
Apart from ebay cheapies.
Click to expand...
Click to collapse
I do not mind if you send me cash paypal etc to handle the purchase and shipping for you? If you like i can weigh the actual device (without packaging) which will make it cheaper and price up on royalmail web site air mail signed for etc?
Got one of those
I got the exogear holder about a month ago, and i can recommend it to anyone.
Sticks nice to many surfaces, the phone is not slipping down, can be used with a phone of any size (or a gps device)
The only down side is that you have to use both hands to place your phone into the holder.
so it holds the note fine ?
I have read through the car mount thread, but am interested specifically in a magnetic mount. Wondering if anyone has been using one. Does it turn the screen off etc.? Anyone using, or that has tried one, please provide feedback. Thanks in advance for any info.
Sent from my Nexus 6P using Tapatalk
cveez11 said:
I have read through the car mount thread, but am interested specifically in a magnetic mount. Wondering if anyone has been using one. Does it turn the screen off etc.? Anyone using, or that has tried one, please provide feedback. Thanks in advance for any info.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
A few members in the Dbrand thread have put their metal plate behind their vinyls, and subsequently used they're magnetic mounts. They reported no problems whatsoever, and so I plan to do the same.
Sent from my Nexus 6P using Tapatalk
I'm using an aukey vent mount. It works great with no issues.
Sent from my Nexus 6P using Tapatalk
cveez11 said:
I have read through the car mount thread, but am interested specifically in a magnetic mount. Wondering if anyone has been using one. Does it turn the screen off etc.? Anyone using, or that has tried one, please provide feedback. Thanks in advance for any info.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
I have the magnetic plate behind my case and the main magnet in my vent. The other day my gyroscope got stuck and all my photos were upside down. It's apparently common and all you have to do is tap the back of the phone. The magnet does not turn the screen on or off.
http://forum.xda-developers.com/nexus-6p/help/pictures-upside-t3246925
I use a magnetic mount and it works beautifully.
I have a Scosche magnetic car mount and a Spigen Rugged Armour case. I placed the larger metal plate inside my case with the adhesive to the inside of the case (not phone) and it works very well. Has not fallen. I have not had any issues with signal, GPS, phone turning off, orientation, etc. Have not tried NFC to be honest though.
I used a magnetic car CD mount without any issues. I was able navigate with Google Maps.
I duct-taped the metal plate to the inside of my Adopted case.
This is the mount I am using:
http://www.amazon.com/gp/product/B00V54LQO4?psc=1&redirect=true&ref_=oh_aui_detailpage_o08_s00
I'm using a Koomus Magnetos mount with a magnetic plate taped to the inside of my Speck Candyshell Grip case (and my thinner Diztronic case). No issues affecting phone performance at all.
I stopped using my magnetic car mount on my note 4 because I noticed my 4g lte speeds (I'm on verizon) went down with the magnet. Haven't tried it with the 6p but will test it out.
LuckyDragan said:
I'm using a Koomus Magnetos mount with a magnetic plate taped to the inside of my Speck Candyshell Grip case (and my thinner Diztronic case). No issues affecting phone performance at all.
Click to expand...
Click to collapse
Does the plate do any noticeable bump on the case?
I got this one https://www.amazon.com/gp/aw/d/B00VKMRR9E/ref=yo_ii_img?ie=UTF8&psc=1
Very happy with it. Holds well and doesn't affect the phone at all. Stuck the metal plate inside my rinke case and have not had any problems.
Sent from my Nexus 6P using Tapatalk
There is something about the whole magnet / electronic device thing that bothers me...
thedude420 said:
There is something about the whole magnet / electronic device thing that bothers me...
Click to expand...
Click to collapse
I feel ya, bro. It seems just as untrustworthy as that hoe Sally Rottencrotch who lives in the next building and wants to show you her kitty . . . there's a voice inside your head saying "Don't do it man, she's dirty". A magnetic mount sounds like it would be asking for our expensive ass phone to go flying after the first big pothole you hit. I was looking into a car mount a few weeks ago and found this: The Best Smartphone Car Mount.
After researching the options for ten hours, surveying more than 1,000 Wirecutter readers, and testing about thirty models, the smartphone car mount we recommend for most people is TechMatte’s MagGrip CD Slot ($11). Although it may not be what you’d envision when you think of a car mount, the MagGrip CD Slot proved to be a simple, compact, and affordable option that’s a great fit for most cars. Compared to the other models we tested, the style allows for the easiest insertion, removal, and repositioning and does not sacrifice a secure hold. It also places the phone at an ideal position that doesn’t block your view of the road.
Click to expand...
Click to collapse
It's incredibly thorough and well-reasoned, and by the end I had no logic with which to argue it. Mine will be in Tuesday.
cabbieBot said:
I feel ya, bro. It seems just as untrustworthy as that hoe Sally Rottencrotch who lives in the next building and wants to show you her kitty . . . there's a voice inside your head saying "Don't do it man, she's dirty". A magnetic mount sounds like it would be asking for our expensive ass phone to go flying after the first big pothole you hit. I was looking into a car mount a few weeks ago and found this: The Best Smartphone Car Mount.
It's incredibly thorough and well-reasoned, and by the end I had no logic with which to argue it. Mine will be in Tuesday.
Click to expand...
Click to collapse
lol, 10-4 on Sally. My main concern was mostly the fact of having a "strong magnet" directly touching my device or case. NAND, sensors, processors, etc... all concern me when it comes to strong magnetic fields :/ Maybe I will buy one for my wife and test it out on her device first
thedude420 said:
lol, 10-4 on Sally. My main concern was mostly the fact of having a "strong magnet" directly touching my device or case. NAND, sensors, processors, etc... all concern me when it comes to strong magnetic fields :/ Maybe I will buy one for my wife and test it out on her device first
Click to expand...
Click to collapse
There's really nothing to worry about.
I have (as well as many others) been using magnetic holders for years now.
It's no longer an issue since there aren't any devices with spinning discs.
I wouldn't worry about the phone flying off the mount either if you have it attached properly.
I've taken my previous car to the track multiple times and it held on fine.
brandaopj said:
Does the plate do any noticeable bump on the case?
Click to expand...
Click to collapse
Baaaarely imperceptibly. Since the entire inner layer is silicone, it's quite accommodating, especially since the back plate is less than 1 mm thick.
LuckyDragan said:
Baaaarely imperceptibly. Since the entire inner layer is silicone, it's quite accommodating, especially since the back plate is less than 1 mm thick.
Click to expand...
Click to collapse
i have a magnetic one that i had for my other phone that was already in my car. being on project fi, i got onto project fi chat help and asked about the magnetic car holders. the rep told me that while they had no data to support or not support it for the 6P, they would recommend not doing it due to the way the GPS and battery are positioned in the phone. take that for what it is worth for you...
Was tinkering with a magnetic car mount today and noticed that if the magnet touched the bottom back of the phone (right by the USB port) the screen turns on.
Any one have an idea why that would happen? Found it interesting, since that's not normally where the magnet will contact I'm not worried, but curious if any one knows what's being tripped.
rbrenart said:
Was tinkering with a magnetic car mount today and noticed that if the magnet touched the bottom back of the phone (right by the USB port) the screen turns on.
Any one have an idea why that would happen? Found it interesting, since that's not normally where the magnet will contact I'm not worried, but curious if any one knows what's being tripped.
Click to expand...
Click to collapse
Built in feature to activate the screen if a special case is used, notably the ones with a flap on the front cover. Once the front cover is flipped open, screen is automatically turned on to welcome you. You can trigger the same thing you witnessed by placing the magnet on the screen side, near the bottom. Magnet comes close, screen locks. Magnet moves away, screen activates. Same feature on a lot of other devices from years past actually, such as OG nexus 7 and whatnot.
Don't know if it applies to the 6p, but the OG moto droid had a dock that used a magnetic that automatically launched "car mode" when docked to the magnet.
Sent from my Nexus 6P using Tapatalk
I have one, got it on Amazon for like 8 bucks shipped. The metal disk that goes on to your phone is not magnetized, just metal so that it sticks to the magnetic base- so you don't have to worry about carrying the magnet around all day and erasing the credit cards in your pocket, etc...
Haven't noticed any effect on the sensors when attached, and I use GPS everyday. You would think it would mess up the compass, but I guess I don't use it while attached...
Sent from my Nexus 6P using Tapatalk
Hey i have the spigen neo hybrid ex and just wanted to let ppl know if they're wondering. It works with fine with the magnet car docks. I've put the plate in between the case and phone.
Sent from my Nexus 6P using Tapatalk