Database Info

How To Install Khalpowers V4 Rom for motorola XT720

Hello, This is a guide on how to install khalpowers V4 Rom for motorola XT720
1. The rom can be find here http://www.multiupload.com/OBEJWF9QF download and unrar, then download the patch here http://www.multiupload.com/ETK2TR4VG7 DO NOT UNZIP THIS! then you can download the radio patch http://www.multiupload.com/1CZ6BX1VFI
2.Now we going to root the xt720, download the .apk here http://www.mediafire.com/?q814b0pxrwy7n24 , install to the phone, then click on root, it should say woot, your root or something now your rooted.
3.Go here to download open recovery http://www.4shared.com/file/OZbPemP4/OpenRecovery.html install to your phone open it up, click on install recovery then click normal reboot.
4. this is not needed but you SHOULD if you have sense.open up open recovery (called system recovery in the drawer) then click on the recovery reboot. when the screen has loaded up go to nandroid then backup then click the top 5 (using the volume buttons to move and the camera button to select,) this should 5 mins to 10mins if not take out battery and try again.
5. when you have done that go to your sd card and copy and paste the personaRedV4 folder to the folder nandroid/openrecovery/paste here if you dont have that folder go to step 6 then step 7
6.when you have done this paste the metamorphframework file you downloading to openrecovery/update folder
7. Also i you should install this theme because the one which comes with the rom isn't great. download here http://www.multiupload.com/2ZJWXWUTGI then copy this to openrecovery/update folder.
8.if you didn't back up your rom then make a folder on your sd card called nandroid then create a folder called openrecovery in that folder. paste personaRedV4 folder into it
9. make a ext3 on your sd card look it up use google
10. now go to openrecovery and click on recovery boot, when it's loaded like before go to nandroid>restore>personaRedV4 then restore all whens it finished go back to the main menu then go to apply update then click on metamorphframework then go back to apply update menu and install the radio and galaxyxt like you did before.
11.when finished go to main menu click on clear davik cache/cache partion then wipe / factory reset then reboot
12. enjoy many thanks to khalpowers Dexter xavwanted's Mioze7Ae Fjfalcon
for more info go to http://forum.xda-developers.com/showthread.php?t=1002993
Thanks

Nice list. One thing that sometimes trips people up when installing Open Recovery using Dexter's apk: you must have the SD card mounted on the phone when you install Open Recovery (i.e. USB Charge Only mode). The easy way to make sure this is true is to unplug USB. Otherwise "install recovery" will report "success", but Open Recovery won't actually be installed.
TL;DR: unplug the phone before you press the "install recovery" button in step 3.

Mioze7Ae said:
Nice list. One thing that sometimes trips people up when installing Open Recovery using Dexter's apk: you must have the SD card mounted on the phone when you install Open Recovery (i.e. USB Charge Only mode). The easy way to make sure this is true is to unplug USB. Otherwise "install recovery" will report "success", but Open Recovery won't actually be installed.
TL;DR: unplug the phone before you press the "install recovery" button in step 3.
Click to expand...
Click to collapse
Yeah, thanks but i thought most people would get it lol

mintaeroboy said:
Hello, This is a guide on how to install khalpowers V4 Rom for motorola XT720
1. The rom can be find here http://www.multiupload.com/OBEJWF9QF download and unrar, then download the patch here http://www.multiupload.com/ETK2TR4VG7 DO NOT UNZIP THIS! then you can download the radio patch http://www.multiupload.com/1CZ6BX1VFI
2.Now we going to root the xt720, download the .apk here http://www.mediafire.com/?q814b0pxrwy7n24 , install to the phone, then click on root, it should say woot, your root or something now your rooted.
3.Go here to download open recovery http://www.4shared.com/file/OZbPemP4/OpenRecovery.html install to your phone open it up, click on install recovery then click normal reboot.
4. this is not needed but you SHOULD if you have sense.open up open recovery (called system recovery in the drawer) then click on the recovery reboot. when the screen has loaded up go to nandroid then backup then click the top 5 (using the volume buttons to move and the camera button to select,) this should 5 mins to 10mins if not take out battery and try again.
5. when you have done that go to your sd card and copy and paste the personaRedV4 folder to the folder nandroid/openrecovery/paste here if you dont have that folder go to step 6 then step 7
6.when you have done this paste the metamorphframework file you downloading to openrecovery/update folder
7. Also i you should install this theme because the one which comes with the rom isn't great. download here http://www.multiupload.com/2ZJWXWUTGI then copy this to openrecovery/update folder.
8.if you didn't back up your rom then make a folder on your sd card called nandroid then create a folder called openrecovery in that folder. paste personaRedV4 folder into it
9. make a ext3 on your sd card look it up use google
10. now go to openrecovery and click on recovery boot, when it's loaded like before go to nandroid>restore>personaRedV4 then restore all whens it finished go back to the main menu then go to apply update then click on metamorphframework then go back to apply update menu and install the radio and galaxyxt like you did before.
11.when finished go to main menu click on clear davik cache/cache partion then wipe / factory reset then reboot
12. enjoy many thanks to khalpowers Dexter xavwanted's Mioze7Ae Fjfalcon
for more info go to http://forum.xda-developers.com/showthread.php?t=1002993
Thanks
Click to expand...
Click to collapse
Hi
Thanks for the really detailed tutorial, but the rom link seem's to down. Could you please give us another link

krishn said:
Hi
Thanks for the really detailed tutorial, but the rom link seem's to down. Could you please give us another link
Click to expand...
Click to collapse
http://www.multiupload.com/OBEJWF9QFI
Sent from my XT720 using XDA App

mintaeroboy said:
http://www.multiupload.com/OBEJWF9QFI
Sent from my XT720 using XDA App
Click to expand...
Click to collapse
hows the rom everyone?

Instead of using the PersonaRedV4 archive, can I follow your guide and use the GalaxyXT one that khalpowers put up? http://www.multiupload.com/VAIZTZJWMM <-- this one here

Beako said:
Instead of using the PersonaRedV4 archive, can I follow your guide and use the GalaxyXT one that khalpowers put up? http://www.multiupload.com/VAIZTZJWMM <-- this one here
Click to expand...
Click to collapse
Yes of cousre
Sent from my XT720 using XDA App

Hello All,
I'm knew to Android but since I got my XT720 I have been looking for ways to make it better since it doesn't have a lot of internal memory. I would also like to share how I installed it GalaxyXTv4.
I basically followed this Video
http://forum.xda-developers.com/showthread.php?t=943368
I download it the Galaxy from using this link
http://www.multiupload.com/VAIZTZJWMM
Finally I downloaded the whole root and openrecovery using this link
http://forum.xda-developers.com/showthread.php?t=946973
I also replace the content of the openrecovery folder with the extract of the GalxyXT, and the followed the Video.
The only difference is that I did reset everything cache, davlik, and factory defaults. When the phone rebooted, I was doing the initial setup and the phone rebooted itself twice, so I decided to remove the microSD card let the phone boot and then add the SD card back, I formated the card using the phone option and it has been working great (only a few hours since I installed the Galaxy).
The phone is performing better than when I was on 2.1 with apps2sd and definitely better than using 2.2.1 v4 BLUR make

My quick office is gone and when I wanna watch youtube videos the phone will reboot by itself. Help, please.

nnbmj said:
My quick office is gone and when I wanna watch youtube videos the phone will reboot by itself. Help, please.
Click to expand...
Click to collapse
1. I can't do anything about quickoffice sorry I miss it to but use documents to go and abode PDF (thats what I use) or go to filestube.com and search quick office apk download and install
2. Idk about YouTube if its the app make sure you have flash, and with the browwser videos aren't very good playing
Hope that's helps you
Sent from my XT720 using XDA App

I followed this guide and it worked, but when I powered off and powered on my phone just now.. it just stays at the white Motorola circle logo and then powers off. It's not bricked... is it?
Edit: Managed to get back into Openrecovery to wipe all 3 cache things. Now it's working okay.

After I format the SD card, I put to the phone, and it is not able to be read anymore. Please help

Re format it or buy a new card
Sent from my HTC Vision using XDA App

Sharp SH7218u

This thread is dedicated to hacking and development of the Sharp SH7218u. This is an Android phone with a somewhat unique clamshell form-factor.
Before proceeding, please note that all of the usual warnings apply. The software and techniques described here have the potential to break your device and make it unusable. By using the software and following these techniques you run the risk of bricking your phone. I take no responsibility if this happens - proceed at your own risk.
First, some credits for the work of others:
Z4root:
Developed by xda member RyanZA.
http://forum.xda-developers.com/showthread.php?t=833953
SH7218u Clockworkmod Recovery:
Clockworkmod original developer is Koushik Dutta:
www.clockworkmod.com
Dialer2:
Original developer of now open source dialer is dnaq Productions:
http://dnaq.tumblr.com/
Initial hacking and development work:
Gigi Tse is credited for early and ongoing work for the SH7218u:
http://gigitse.com/
http://www.msharp.cn/forum/t390991/page1/
Now on the instructions....
-------------------
Rooting Your Phone, Installing Clockworkmod Recovery, and Installing Google Apps
Gather the Required Files:
1. Go to the z4root xda thread, login in and download z4root.1.3.0.apk:
http://forum.xda-developers.com/showthread.php?t=833953
2. Download SH7218u_recovery.apk:
(attached below)
3. Download the Clockworkmod recovery flashable Google Apps file from the following site:
http://goo-inside.me/gapps
In the table, you want to select the HDPI, CyanogenMod 6 version. The file that you download should be
called 'gapps-hdpi-20101114-signed.zip'
4. Place these three files on your micro-SD card and insert the card into your phone.
Root Your Phone
1. Boot up your phone and skip the system setup wizard. Go to the app drawer and run 'Settings'.
2. Select 'Applications', and enable 'Unknown sources'.
3. Select 'Development', and enable 'USB debugging'.
4. Exit back out to your home screen launcher, then go to the app drawer and run 'ES File Explorer'.
5. The file explorer should show you the contents of your sd card. Tap on the file 'z4root.1.3.0.apk'.
6. Confirm installation of z4root, and when this is complete select 'Open' to run the app.
7. From within z4root, press the 'Permanent Root' button.
8. Wait until this process is complete, and the phone will reboot by itself. It can take 30 seconds or so for this to happen, so be patient. You are now rooted.
Flash Clockworkmod Recovery Image
You must be rooted for this to work. Do this after you have successfully completed the rooting process above. Also please note that this is not the CWM recovery image developed by Gigi Tse. Her image contains CWM version 3.0.2.4. This is my recovery image and contains CWM version 5.0.2.8.
1. Open the app drawer and run 'ES File Explorer'.
2. Tap on the file 'SH7218u_recovery.apk'.
3. Confirm installation and run the application by selecting 'Open' once installation is complete.
4. On startup, the application will request Superuser privleges - press 'Accept' to allow this.
5. Press the 'Flash Clockworkmod Recovery' button.
6. Wait a few seconds until you see the confirmation message 'Recovery Flash Complete'.
7. Exit out of the application. You now have Clockworkmod as your recovery. You can uninstall the SH7218u_recovery app if you wish as you have no further use of it.
Note for users of Link2SD: This version of Clockworkmod recovery will perform backup and restore operations on the secondary SD card partition used by Link2SD. However, that partition must be formatted in the ext3 filesystem for this to work. Formatting the partition in any other filesystem (e.g. ext2, fat32, ext4, etc.), will result in failure to mount and backup the partition. An SD card can be prepared for use with Link2SD from within this version of Clockworkmod recovery by using the 'Partition SD Card' feature within the 'Advanced' menu.
Install Google Apps
1. Boot into Clockworkmod Recovery. This is done by powering down your phone, then turning it back on by pressing and holding down the number 3 and 6 buttons together, then pressing and releasing the power button. Continue to hold the number 3 and 6 buttons until you see the Clockworkmod screen.
2. Select 'install zip from sdcard' from the menu.
3. Select 'choose zip from sdcard' from the next menu.
4. The next menu will be the contents of your sdcard. Select the Google Apps file - 'gapps-hdpi-20101114-signed.zip'.
5. Confirm the installation and wait until it is complete.
6. Press the back button once to get back to the main screen and select 'reboot system now'. You now have Google Apps installed.
When you reboot the device, you will be taken through the Google account setup. Please note that in order for contacts applications to work with Google synchronization, you will need to install a modified contact editor. The stock firmware on this phone is not intended to sync with the Google servers as it was intended for Chinese users. The modified contact editor fixes this issue. It is free and available from the Market. Look for 'Contact Editor Free' by a developer named 'dmfs'.

Deleted

Deleted

Thank you! Very good job!
No ideas how to get the phone to answer a call when you open?

TabletGuru said:
Thank you! Very good job!
No ideas how to get the phone to answer a call when you open?
Click to expand...
Click to collapse
Hey someone read my thread!!
Sorry, no posts on this thread yet and it has been up for a while. I think most people who have this phone stick to Howard forums or other such sites that cater to the phone type and its region of origin.
As for your question, no...but I have tried. That would require a modification of the phone app or a change to the OS itself as the phone app is the active app when the phone is ringing and the device is opened. If I had the source code for the stock phone app, this would be a fairly easy thing to do. Unfortunately, I have been unable to find the source for the stock device firmware anywhere. I tried compiling a generic Froyo phone app from the Google source, but of course this did not work. This is a somewhat special app that needs to interface with several parts of the device's hardware, so a generic version just doesn't work. Unless Sharp releases the full source code for the stock firmware, I don't think this is going to be possible....at least not from someone with my somewhat limited development abilities.

Sent from my MB855 using xda premium

Google Play
Hey xdajunkman, amazing work you are doing here.
Have you considered adding Google Play to the mix? I was able to get the latest version working just fine on my SH7218u.
How hard would it be to hack the light notifications area of the phone, to make some of the notifications last for 1-2 seconds longer?
I should also add that my phone is giving some really flaky GPS information. It is putting me somewhere in the ocean near China unless I use wifi only. Do you have any experience with this?
EDIT: I don't know why, but the dialer is not working for me with regard to the long-press of the delete key and silent (#) key. No idea why...
EDIT2: It is because I had another keyboard installed; which must do something funky... switching back to a default keyboard and then trying seemed to work!

Thanks for your guide! Do you have got new version Rom? 2.3 or 2.3.5?

johnny8384 said:
Thanks for your guide! Do you have got new version Rom? 2.3 or 2.3.5?
Click to expand...
Click to collapse
Not likely to come. This would mean building something like CM7 for a new device from scratch. This kind of task takes dozens of man-hours for an expert developer, and that assumes that they have access to the original source for the release build. We do not have the original source, and there is no such developer working on this device. We will be stuck with Froyo.

Thank you so much for taking the time to write a guide xdajunkman!
I received my SH7218u today and did everything. The instructions were clear and the whole process took no more than 30 minutes.
Surprisingly, my SH7218u accepts 64 microsd card (after you format it).

Is it ok to have 2 partitions?
One is a ext2, and the other I just created using clockwork mod ext3...
I'm wanting to use that custom rom..
EDIT: clockwork mod Repartitioned my ext2 to ext3 now ಠ_ಠ
and all my apps are "installed"
Going to make a backup rom now.. and then Install xdajunkman's custom rom >__<
EDIT: Ok succesfully installed the Custom rom It looks great I might say awesome work xdajunkman
Ok the question is now.. how to I get back all my previous apps and stuff?
I followed the guide and made a backup already

My 7218u stuck at Sharp logo when boot because i've uninstalled a system apps ( don't remember exactly) what i've to do now? plz help me
P/S: My english sucks, sorry for that

delpan said:
My 7218u stuck at Sharp logo when boot because i've uninstalled a system apps ( don't remember exactly) what i've to do now? plz help me
P/S: My english sucks, sorry for that
Click to expand...
Click to collapse
Boot into clockwork mod by pressing 3and 6 and the power on button, (assuming you have that installed)
Reinstall the rom.. http://forum.xda-developers.com/showthread.php?p=22106340#post22106340

sirjoe1 said:
EDIT: Ok succesfully installed the Custom rom It looks great I might say awesome work xdajunkman
Ok the question is now.. how to I get back all my previous apps and stuff?
I followed the guide and made a backup already
Click to expand...
Click to collapse
It is usually just easier if you wait until you have the new ROM installed before you try and install your apps. There is no reliable way from within CWM to restore your installed apps.
However, because the new ROM is just a modified version of the stock ROM, it should be possible to flash the new ROM without wiping the existing user data and keeping your installed apps. Restore your backup that has all of your apps installed. Then, flash the modified ROM but skip the step in the instructions that tells you to wipe existing user data. Instead of wiping the user data, do the following:
1. In the 'mounts and storage' menu of CWM recovery, select to format both '/system' and '/cache'
2. In the 'advanced' menu of CWM, select 'Wipe Dalvik cache'
Now proceed with installing the ROM as per the instructions. This should result in the modified ROM being installed, but all of your installed apps should be protected.
If this does not work, then you will just have to re-installed the modified ROM according to the instructions (including wiping the existing user data), then re-install all of your apps. For future reference, a great app called Titanium Backup will allow you to backup your apps and restore them after changing the ROM.

sirjoe1 said:
-->My 7218u stuck at Sharp logo when boot because i've uninstalled a system apps
-->( don't remember exactly) what i've to do now? plz help me
Boot into clockwork mod by pressing 3and 6 and the power on button, (assuming you have that installed)
Reinstall the rom.. http://forum.xda-developers.com/showthread.php?p=22106340#post22106340
Click to expand...
Click to collapse
Agree with sirjoe1. Hopefully you flashed CWM as your recovery before you did this. However, if not then booting into recovery mode as described above should trigger a factory reset from the stock recovery partition. I have not attempted this myself with the stock recovery, but usually what this will do is simply return your device to it's stock state. You can then start over using the instructions in the OP....but without deleting critical system apps this time.

Hello again, I've a question, has anyone successfully Overclocked the cpu frequency on this phone using setcpu or similar apps?

Overclocking not possible without either a custom kernel or a kernel module of some sort. As the source for the stock kernel was never released, such a thing would be a HUGE undertaking. Very unlikely to ever happen.

xdajunkman said:
Overclocking not possible without either a custom kernel or a kernel module of some sort. As the source for the stock kernel was never released, such a thing would be a HUGE undertaking. Very unlikely to ever happen.
Click to expand...
Click to collapse
Oh darn, that's such a downer..
These sh7218u threads are so dead nowadays :/

I might have messed up my phone -_- (again)
I went into the /data/sdext2/dalvik-cache and deleted everything and now a few apps have gone missing, and some won't work, they just give me a force close error >___<
I also lost my go launcher ex settings..
and to make things worse.... my internal memory went to 0% free... deleted a few things to clear up 8mb..
Any Ideas how to fix this ? @[email protected]
[Can you guys play 480p videos?
I can't.. 360p runs fine though..]

I am hoping to get this device this week.
Thanks for your tutorial, and I will let you know if it runs out just fine

[Q] Please Help :(

First off, this is my first post (Woopty doo horraaaay) and I desperately need help.
I have a Wifi-Only Motorola Xoom, it used to be on 3.2.1, and I had it rooted, with only using the Tiamat 2.2.2 Moray root.
I've been wanting to upgrade to ICS for a while, and I finally am. I've had to reset my xoom back to stock 4 or 5 times now, and I'm annoyed and want to do it right. Starting off, my Xoom is starting on ICS, unlocked, unrooted.
I've done many different orders of stuff. First, I flashed the clockwork recovery mod, and then I go into it, and installed the EOS-Wingray-60, but after I did that, when I start up the xoom, it never loads, it stays on the "Team EOS" boot animation. I tested it, and left it on all night, and woke up and it was still on team eos. Next, I tried installing the universal root, (It worked), and THEN I installed the Wingray-60. Same problem, stuck on animation. I've repeated these several times, and am not sure what to do.
Pretty much all I want is to be able to overclock it. What order should I do when installing roots and things?
I have wingray-60, Rogue Kernal 2.0.2 Kuma, Universal root, Clockwork recovery mod, Tiamat 3.0.5 (Not sure what this is, but when I use it, it automatically aborts the install), and I have all of the **** to restore it back to factory + my original 3.2.1 backup rooted is saved.
What order should I use the installs in, and which ones should I use? And is there something I'm doing wrong?

To have ICS with Overclock, all you need is:
- Unlocked Bootloader
- Rooted
- CWM Recovery installed (Rogue)
- TeamEOS Wingray Build 60
- TeamEOS Google Apps V10.5
All the other stuff you listed, you can move to another folder for archive. You don't need it.
Follow these steps.
Use Titanium Backup to backup any applications and data you want to save. If you don't care about the apps/data, you can skip this step.
Boot into Recovery. Power off, when the Moto logo shows for about 1 sec, hold the Vol down. Select Android Recovery.
From CWM, select wipe data/factory reset **Warning - you will blow away all your apps/data *** See note about backing up first.
Follow these steps to ensure a clean first install. Select "wipe cache partition"
Select "Yes - Wipe Cache"
Select "advanced"
Select "Wipe Dalvik Cache"
Select "Yes - Wipe Dalvik Cache"
Select "+++++Go Back+++++"
Select Install from Zip, Select Zip. Navigate to your Team EOS ROM, and install it
IMMEDIATELY after the ROM is installed, install the Google APPS file via Select ZIP.
If you did everything correctly, Reboot. Now Team EOS boot animation should start and ICS will be available to you along with the Market. Restore your apps. Select from Settings to OC to your desired speed and enjoy.
Remember to thank the Devs for all their hard work and donate

al mon said:
To have ICS with Overclock, all you need is:
- Unlocked Bootloader
- Rooted
- CWM Recovery installed (Rogue)
- TeamEOS Wingray Build 60
- TeamEOS Google Apps V10.5
All the other stuff you listed, you can move to another folder for archive. You don't need it.
Follow these steps.
Use Titanium Backup to backup any applications and data you want to save. If you don't care about the apps/data, you can skip this step.
Boot into Recovery. Power off, when the Moto logo shows for about 1 sec, hold the Vol down. Select Android Recovery.
From CWM, select wipe data/factory reset **Warning - you will blow away all your apps/data *** See note about backing up first.
Follow these steps to ensure a clean first install. Select "wipe cache partition"
Select "Yes - Wipe Cache"
Select "advanced"
Select "Wipe Dalvik Cache"
Select "Yes - Wipe Dalvik Cache"
Select "+++++Go Back+++++"
Select Install from Zip, Select Zip. Navigate to your Team EOS ROM, and install it
IMMEDIATELY after the ROM is installed, install the Google APPS file via Select ZIP.
If you did everything correctly, Reboot. Now Team EOS boot animation should start and ICS will be available to you along with the Market. Restore your apps. Select from Settings to OC to your desired speed and enjoy.
Remember to thank the Devs for all their hard work and donate
Click to expand...
Click to collapse
Now, just to be clear, I should root with the universal root?

Do you have Titanium Backup or Rom Manager? Do you also have SU access?
If you do, you most likely have Root, but you can always re-root if you are unsure.

al mon said:
Do you have Titanium Backup or Rom Manager? Do you also have SU access?
If you do, you most likely have Root, but you can always re-root if you are unsure.
Click to expand...
Click to collapse
No, I had just restored my xoom back to factory. I just rerooted, using the universal root, then I wiped all my crap like you said, then I downloaded Eos 60, then I download Gapps and when I download gapps, my xoom says "E:Can't open /sdcard/EOS_GApps_ics_4.0.3_v9.zip (bad) Installation aborted".
Now what :|

You need to flash this version of the CMW Recovery. Without it, you cannot see/mount your SDCard.
http://forum.xda-developers.com/showthread.php?t=1074979
After flashing, reboot into recovery again and it should see the external SDCard which now contains your EOS ROM and EOS GApps. Flash those back to back and you should be good to go.

I CAN see my external SDCard!!!
If I couldn't see it, how could I even be rooted? That's a whole 'nother problem!
Sorry, but yeah, I can't see everything just fine. It's just Gapps is refusing to install, and everytime I install Eos 60, my device won't boot.

Slayergramp said:
I CAN see my external SDCard!!!
If I couldn't see it, how could I even be rooted? That's a whole 'nother problem!
Sorry, but yeah, I can't see everything just fine. It's just Gapps is refusing to install, and everytime I install Eos 60, my device won't boot.
Click to expand...
Click to collapse
Okay... Relax lol
Please answer these questions
1. Have u checked the md5 sums on the gapps and the eos rom? They are provided and a bad installation can mean your files are buggered sooo check the md5 are correct for each file
2. Did you install the rogue recovery or the modded cwm recovery using fastboot? (not using rom manager or whatever)
3. Have you factory wiped before installing the rom?
4. Did you wipe cache and dalvik cache?
5. Did you install the rom then the. Gapps?
6. Did you fix permissions once you finished flashing both files?
Thanks
Sent from my mind control device

joshndroid said:
Okay... Relax lol
Please answer these questions
1. Have u checked the md5 sums on the gapps and the eos rom? They are provided and a bad installation can mean your files are buggered sooo check the md5 are correct for each file
2. Did you install the rogue recovery or the modded cwm recovery using fastboot? (not using rom manager or whatever)
3. Have you factory wiped before installing the rom?
4. Did you wipe cache and dalvik cache?
5. Did you install the rom then the. Gapps?
6. Did you fix permissions once you finished flashing both files?
Thanks
Sent from my mind control device
Click to expand...
Click to collapse
First off, I finally got the EOS rom to work perfectly fine. My problem was that I never wiped the system's cache data or dalvik. And where do I check the Md5 sum for the Gapps? Because they still are a "(bad)" file.
Yes, I use a perfectly fine recovery, not rom manager, what permissions need fixing? Thanks.

Slayergramp said:
First off, I finally got the EOS rom to work perfectly fine. My problem was that I never wiped the system's cache data or dalvik. And where do I check the Md5 sum for the Gapps? Because they still are a "(bad)" file.
Yes, I use a perfectly fine recovery, not rom manager, what permissions need fixing? Thanks.
Click to expand...
Click to collapse
Download a free md5 program...
Look at the md5 when u download the gapps package in the goo in side me link in the eos thread
Sent from my mind control device

joshndroid said:
Download a free md5 program...
Look at the md5 when u download the gapps package in the goo in side me link in the eos thread
Sent from my mind control device
Click to expand...
Click to collapse
What IS md5, what does it need to be, and where do I check it? I don't understand the jibberish in the second half of your sentence.

Slayergramp said:
What IS md5, what does it need to be, and where do I check it? I don't understand the jibberish in the second half of your sentence.
Click to expand...
Click to collapse
Md5 is a unique hash that is calculated depending on the file.. When they match you have exactly what has been uploaded by the developer. When they dont that can be a cause of your problems.. I suggest u know and understand that for future for almost any file you download where one is provided... You can brick your device and it would be your own fault if you didnt check an md5.. So jibberish, hardly..
Now... Google a free md5 program for your computer and download n install it
Go to your relevant eos thread in first post there is a link for latest gapps packages...
Download the latest 10.5v if u havnt
Look at the md5 its displayed when you download the file or on the side of the file in the list...
Put the downloaded file in the md5 program on your computer and compare to the one provided..
Now try to flash this package within recovery...
Be sure to wipe caches, dalvik... Flash gapps.. Go to advanced then fix permissions... Then reboot.. See if it works.. If not try factory reset, wipe cache n dalvik, install rom, then gapps, then fix permissions.. Then reboot
Sent from my mind control device

ICS installation for HTC Wildfire S

Cud anybody help me with the istallation procedure for the following link..
http://forum.xda-developers.com/showthread.php?t=1683874
Really confused here and wanna install ICS 4.0.4 for my phone :/

0. Make sure you're rooted
1. I think you also need s-off
1.5. Download the ROM file, and the Gapps file
2. Flash a custom recovery, such as ClockWorkMod. The easiest way is to download ROM Manager
3. Boot into that recovery. This can be done by using ROM Manager, or some device specific method (search it)
4. Make a backup (use the volume keys to navigate, select and back buttons are different for each phone, but should be easy to figure out)
5. Clear data/factory reset. OPTIONAL: under advanced clear dalvik cache
6. Install zip from SD card, navigate to the downloaded ROM, and select
7. Let it install, then install zip from SD card again, but this time select the google apps file
8. Reboot and enjoy! First bootup will always take longer than normal.
NOTE: since you do a factory reset, its a good idea to backup your apps with titanium backup, and various other things (like sms and mms) with mybackup root
This is the procedure for flashing any non-Sense (lol) ROM as well
Hope this helps!
Sent from my MB508 using xda premium

I really doubt the Wildfire S to be powerful enough to manage running ICS smoothly.
Anyway, good luck!

Rooting the phone is such a pain in the ass wid the bootloader requiring as many as 14-15 software's installed b4 it can work properly and also crashes everytime!!
gagdude said:
0. Make sure you're rooted
1. I think you also need s-off
1.5. Download the ROM file, and the Gapps file
2. Flash a custom recovery, such as ClockWorkMod. The easiest way is to download ROM Manager
3. Boot into that recovery. This can be done by using ROM Manager, or some device specific method (search it)
4. Make a backup (use the volume keys to navigate, select and back buttons are different for each phone, but should be easy to figure out)
5. Clear data/factory reset. OPTIONAL: under advanced clear dalvik cache
6. Install zip from SD card, navigate to the downloaded ROM, and select
7. Let it install, then install zip from SD card again, but this time select the google apps file
8. Reboot and enjoy! First bootup will always take longer than normal.
NOTE: since you do a factory reset, its a good idea to backup your apps with titanium backup, and various other things (like sms and mms) with mybackup root
This is the procedure for flashing any non-Sense (lol) ROM as well
Hope this helps!
Sent from my MB508 using xda premium
Click to expand...
Click to collapse

pavan shandilya said:
Rooting the phone is such a pain in the ass wid the bootloader requiring as many as 14-15 software's installed b4 it can work properly and also crashes everytime!!
Click to expand...
Click to collapse
Yeah man, the installation of the ROM is actually the easy and fun part
But good luck and if you need any help, you can post your questions in the respective threads. I'm sure you'll get lots of answers
Sent from my MB508 using xda premium

Loading First ROM

Hey guys,
I'm very new to Android and I have a few questions. I used to install custom OS's on my blackberry and I jailbroke my iphones so I'm some what used to this stuff but every operating system is obviously different. So I've had my S3 for about 6 weeks and I finally rooted a couple days ago. To root I followed this thread: http://forum.xda-developers.com/showthread.php?t=1875914. I rooted, unlocked the bootloader, and installed clockworkmod recovery. Now I have been wanting to load a jelly bean ROM. I kind of wanted to load the Synergy ROM found here: http://forum.xda-developers.com/showthread.php?t=1792499. So am I ok to just download from that thread and drag and drop to my phone on my PC and just follow the directions? I don't have an external SD Card is just fine to use internal storage? Like I said all I have done is rooted from that first link. I just kinda wanted some verification before I go and brick my phone, thanks for your help.

Piece of cake. If you scroll down to the second post of the Synergy thread, you'll see the very first question in the FAQ:
Q: How do I install this ROM?
A: Download the ROM from the "Download Links" section above, place the file on your phone's external SD card, and then flash via your recovery. First boot after flash takes a wee bit longer than usual.
Click to expand...
Click to collapse
So, download the ROM (using either your phone (take note of where it saves it) or computer). If using your computer, connect your phone and drop that sucker somewhere on the SD card (external or internal -I use internal). (I create a folder in the root of my internal SD card called Files to Flash, in which I keep everything I flash, so it doesn't get scattered about, but do what you want )
Use Titanium Backup to back up all your apps and data to restore later (when you do restore, since you're going from ICS to JB, don't restore any System Data as it will cause many issues (apps and app data is fine)).
Reboot into recovery using Rom Manager, as mentioned in the rooting tutorial you followed.
Use your volume keys to navigate to "backup and restore" and select it using either the home or power button.
Select "backup" and wait for your nandroid backup to complete.
Next, navigate back to the original menu and select the "wipe cache/factory data reset" option.
Once that's done, select the "wipe cache partition" option.
(side note: Instead of doing those two things, I like to go into the "mounts and storage" option and select "format /system" "/data" and "/cache". Both ways work - BE VERY CAREFUL NOT TO FORMAT SDCARD AND EXTERNALSD IF YOU USE MY METHOD...bad joo joo).
Select the "advanced" option from the initial menu and "wipe dalvic cache".
Now you're ready to install.
In the first menu, the second option is "install zip from sdcard." Select it.
Select "choose zip from sdcard" and navigate to where you saved the ROM and select it.
Scroll either up or down, passed all the "no"s and select "yes" and let it do it's thing.
Once it's done, navigate back to the menu you first started at by selecting the "Go Back" option, then reboot and profit.

letinsh posted pretty much the most concise instructions to follow. In addition, I'll suggest to backup your IMEI prior to flashing anything.
Info here:
http://forum.xda-developers.com/showthread.php?t=1852255

So I can just go to this website from my phone and go to the download link and download directly to my phone? Is that easier/faster? Thanks for responding

Good call, Snoop.
I totally forgot about it because I did it once and have flashed dozens of times since
Naganalf - as far as downloading via fone or computer, it's really 6 of one, half dozen of the other. Whichever makes you more comfortable. Keep in mind that it is HIGHLY recommended that you check the md5 sum of your download before flashing, to ensure you have a good download. I have an md5 sum checker on both my computer and fone, so I can do either fairly easily.
This is the one I used on my computer
and I use MD5 Checker by Fabien Thalgott (play store) on my phone.
Having just looked at the Synergy thread, they don't post md5's for their nightly's, so don't worry about that step for them, although, it typically is good practice to check (I hardbricked my S3 the third day I had it by pushing a corrupt file using Odin that would have been caught if I had checked the md5). (Got it JTAG'd back to life, so no worries - everything is recoverable from except physical damage )

Thanks for your help snoop and letish, after this first flash I will be much more comfortable. I am downloading now so when it gets done I will give it a whirl and let you know how it goes.

Naganalf said:
Thanks for your help snoop and letish, after this first flash I will be much more comfortable. I am downloading now so when it gets done I will give it a whirl and let you know how it goes.
Click to expand...
Click to collapse
No worries, dude. I agonized for days before I rooted and flashed my first ROM on my OG Droid back in the day - had one of the founders of DroidForums (synik4l) on G-chat while I did the deed...I was so chicken
Good times, though. Just do your research, understand what it is you're doing, mitigate any risks (by doing your research...) and go to town! Most of the bugs in the process have been ironed out by jokers like me testing and hard-bricking along the way . At this point, the processes are very user friendly and reliable:fingers-crossed:
Enjoy!

How'd it go?
Sent from my SCH-I535 using xda app-developers app

Getting ready to try it now, I will let you know.

when i "Reboot into Recovery" from Rom Manager i don't have a "backup and restore" option. it only has "reboot system now", "apply update from external storage", "wipe data/factory reset", "wipe cache partition", and "apply update from cache"
am I missing something?

Naganalf said:
when i "Reboot into Recovery" from Rom Manager i don't have a "backup and restore" option. it only has "reboot system now", "apply update from external storage", "wipe data/factory reset", "wipe cache partition", and "apply update from cache"
am I missing something?
Click to expand...
Click to collapse
If you haven't selected any options yet then just go back into your rom. You need to download EZ Recovery from the Play Store so that you can flash a custom recovery (ClockworkMod or TWRP) through that app.
Sent from my SCH-I535 using xda app-developers app

I'm sorry but I'm a little confused. Why is it only giving me those options when I reboot into recovery from ROM Manager? The first time after I rooted I'm pretty sure there was an option to "Backup and Restore". Also, why can't I just go into ROM Manager and select "Install ROM From SD Card" and select my ROM that way? sorry but I do appreciate your help.

Naganalf said:
I'm sorry but I'm a little confused. Why is it only giving me those options when I reboot into recovery from ROM Manager? The first time after I rooted I'm pretty sure there was an option to "Backup and Restore". Also, why can't I just go into ROM Manager and select "Install ROM From SD Card" and select my ROM that way? sorry but I do appreciate your help.
Click to expand...
Click to collapse
Good questions. The recovery you rebooted into is the Stock recovery that comes with the phone. Your OP in this thread says that you installed CWM recovery. It looks like it didn't stick. Two options - Use the program Snoop suggested, or open up Rom Manager and hit the "Flash Clockwork Mod Recovery" option.
From there you can continue as previously explained.
EDIT - I've never used the ROM Manager's install ROM from SD card option, so I can't speak to it. I know I like having the control (or perceived control ) of doing everything by hand in recovery.

ok I have loaded android version 4.1.1 build number SynergyROM Nightly JB(r111) so I guess i did everything correctly. now i'd like to get my phone kinda back to how i had it lol. if I run titanium backup will my home screens all be restored the way I had them? and when i run titanium backup i ONLY want to run "restore missing apps with data" right? not "restore missing apps + all system data" just want to make sure. thanks

Naganalf said:
ok I have loaded android version 4.1.1 build number SynergyROM Nightly JB(r111) so I guess i did everything correctly. now i'd like to get my phone kinda back to how i had it lol. if I run titanium backup will my home screens all be restored the way I had them? and when i run titanium backup i ONLY want to run "restore missing apps with data" right? not "restore missing apps + all system data" just want to make sure. thanks
Click to expand...
Click to collapse
Correct, don't restore the system data. Now, if you want your txt messages back, you'll see a yellow Messages backup (with a TiBu logo). If you restore that (the only option available is Data, I think), you'll get your txts back.
Remember that you'll prolly need to reboot after the restore, then use ROM Manager to Fix Permissions, then restart again. You'll be off to the races!
As far as getting your home screens back, I don't know if that'll be possible, although they're both TouchWiz launchers....might be alright, then
I run Nova launcher regardless of ROM, so all I have to do is restore the Nova app, then used the built in Nova backup/restore to get my home screens back. Let me know how the Titanium restore works! As a side note, if I have any doubt about whether I'll be able to get my launcher set back up (or I'm switching launchers to try them out), I'll take quick screenshots of all my screens and use that as a reference to set them back up

well i think im all set, thanks again for your help guys. I went ahead and installed nova launcher so i can back up my home screens like you said. so if I want to try a different ROM do i need to flash back to stock first? or just do it like i did this time?

Naganalf said:
well i think im all set, thanks again for your help guys. I went ahead and installed nova launcher so i can back up my home screens like you said. so if I want to try a different ROM do i need to flash back to stock first? or just do it like i did this time?
Click to expand...
Click to collapse
Nahh, just as simple as putting the ROM you want on your ex SD card or internal one which ever you prefer, wiping system/data , and wiping your cache, and then flash your new ROM . You can also "dirty flash" if say you are just moving from r111 of synergy to a newer one. Typically on the forum you will see if anyone had any problems dirty flashing. I always go with a clean flash just to avoid any problems to begin with.

Naganalf said:
well i think im all set, thanks again for your help guys. I went ahead and installed nova launcher so i can back up my home screens like you said. so if I want to try a different ROM do i need to flash back to stock first? or just do it like i did this time?
Click to expand...
Click to collapse
HoudiniJr said:
Nahh, just as simple as putting the ROM you want on your ex SD card or internal one which ever you prefer, wiping system/data , and wiping your cache, and then flash your new ROM . You can also "dirty flash" if say you are just moving from r111 of synergy to a newer one. Typically on the forum you will see if anyone had any problems dirty flashing. I always go with a clean flash just to avoid any problems to begin with.
Click to expand...
Click to collapse
What he ^ said. You can go from ROM to ROM. I, also, like Houdini said, like to flash clean each time. Try it both ways and see if you have problems
I just threw out Nova as an example - there are several good launchers out there...Nova, Apex, Go Launcher (I'll probably catch flack for mentioning it), Trebuchet (from CM). Most if not all have the ability to backup your settings. Try 'em each and figure out which one works best for you :good:
Glad it worked, buddy. Welcome to the flashing addiction :highfive:!

letinsh said:
What he ^ said. You can go from ROM to ROM. I, also, like Houdini said, like to flash clean each time. Try it both ways and see if you have problems
I just threw out Nova as an example - there are several good launchers out there...Nova, Apex, Go Launcher (I'll probably catch flack for mentioning it), Trebuchet (from CM). Most if not all have the ability to backup your settings. Try 'em each and figure out which one works best for you :good:
Glad it worked, buddy. Welcome to the flashing addiction :highfive:!
Click to expand...
Click to collapse
+1 for Nova Apex is also pretty good. Like lentinsh said, most if not all have the ability to back up your settings, making flashing from ROM to ROM that much easier :good: Cant go wrong with Nova though :laugh:

App Restore
Hey peeps,
I have been able to flash a few new ROMs but can't quite get my Apps Restored. I have/had Titanium Back up installed and backed up. With each ROM I install I don't quite get how to restore the Apps I had installed, Titanium Back up gets dropped when I flash to a new ROM.
I'm going to search the Forum for App Backup 101...
OK so I found a link to App Backup and Restore in GPS, on a different thread looks like it is what I need
thanks for any tips...