Related
I have a Droid Incredible Rooted using Unrevoked forever with S-Off. I have been running CM 6.0.2 for a while now and had an issue the other day with my SD card. The card died and when I put a new card in the phone got stuck in a boot loop. I tried reflashing CM 6.0.2 and gapps but I continue to get the same boot loop. I understand that you need to wipe all data but when I atempt to wipe the Dalvik Cache I get the the following message "E:Can't mount /dev/block/ (File Found)" what do I need to do to fix this. I have no phone right now and have become extremely dependent on using it for everything from GPS to MP3 player in my daily life so any help would be greatly appreciated. I have read some posts suggesting running logcat to find what error I am getting during the bootloop that is happening, but I have no idea how to do that. I think the main issue is that I cannot do a full wipe before flashing the ROM.
Please help! I don't want to chalk this up to a bricked device, but I won't be able to hold out much longer since I have to travel this weekend.
First of all, do not double post. It just clutters up the forums.
Second, you need to post this in the Droid Incredible forum or at the VERY LEAST, the Android Q&A forum. I'm not sure why people took the time to create all of the different forums around here if you guys are not even going to use them.
I'm just taking a shot in the dark here based on my experience flashing older Android phones. So do not tell me I'm wrong, AGAIN this is just an option to try:
Just boot into recovery and do a factory reset on the phone. AGAIN, I'm just going on what I CAN REMEMBER here. Use the hboot menu try a restore. Load a factory ROM onto the SD card (using your PC) and the flash it.
I don't know man, maybe I'm wrong about all of this. FACT is that I've had NUMEROUS phones that were in the same shape you are in right now and after google searching, a little common sense and READING I was able to fix the issues. There is a way to go back to your FACTORY ROM but I'm not going to waste my time doing the research for you here, it's your phone and you have access to the same information all of us do.
EDIT:
I mentioned common sense. With that being said, take a look at your own post bro.
talltubatom said:
I understand that you need to wipe all data but when I atempt to wipe the Dalvik Cache I get the the following message "E:Can't mount /dev/block/ (File Found)"
Click to expand...
Click to collapse
I assume you meant "(File NOT Found)". You are trying wipe data off of a NEW SD Card here. How do you expect it to wipe files that are not even there to start with? Make sure your battery is fully charged before doing anything with the phone also. You might think that sounds like it has nothing to do with your problem BUT it can cause boot loops on SOME devices (android and others). Reset to factory from hboot menu. SKIP THE WIPE ALL PART BECAUSE YOU HAVE A NEW SD CARD. Just get back into your phone running Android and then you can redo everything from there.
Thank you for the response.
Sorry for posting in the wrong thread, perhaps a mod could move this to a more resonable place for this question. I'm not trying to clog anythining up. If that isn't an option I'll just create a new thread over there, but like you said that would just be clutter.
First: I did not mean (File NOT Found) the error says (File Found), seems like an odd error on a Formated SD Card that is why I mentioned it.
Second: I tried going to a stock ROM and it would not flash to the device I think it was looking for the previous official ROM that was relesed for the phone and would not install since that did not exist. The one that I downloaded was when Verizon pushed FroYo for the DInc, perhaps I can find one that supports a different upgrade path.
After trying all logical steps, google searches and reading many thread regarding people who have been stuck in this situation I was not able to find anything that was helping me restore my phone, that is why i started a new thread.
Roll Tide <<<< so you won't be so upset with me
The only reason I said posting in the device specific forum or android forums would be better is because there would be more people that know how to fix it viewing your question.
I'm shooting in the dark here but have you tried flashing Clockwork again? Just putting the .zip on the new SDCARD and flashing it? I'm sorry man, I've searched and tried to come up with a good answer but I've not found THAT much. Post in the Incredible forum would probably get your problem solved. I'm not sure that there is much of a difference between deviceds when it comes to recovery but I'm sure that you will get more accurate answer over there, even in the Android section.
Sooo it seems I have now bricked my beloved G2x. I have tried every recovery method on xda I can find (a few times), but still no luck.
I was trying to restore stock on my phone to catch the new OTA update, and it has failed...miserably.
Now, my phone gets to the little T-Mobile G2x splash screen and then reboots. I've tried NVflash'ing the firmware, I've tried kdz (which I absolutely cannot get to work right), I've tried sacrificing a chicken to the LG powers-that-be (okay, haven't tried that...YET), but nothing has worked.
Does anybody know of an absolute "unbrick" method?
Thanks in advance for the help!
Also, every now and then, the phone will actually make it to the initial "Touch the android to begin." screen, but my battery (which was 100% charged before this started) now says 0%, even when plugged in.
these links were in the first page of me searching "brick help"
http://forum.xda-developers.com/showthread.php?t=1611968&highlight=brick+help
http://forum.xda-developers.com/showthread.php?t=1180331&highlight=brick+help
http://forum.xda-developers.com/showthread.php?t=1619893&highlight=brick+help
I've tried those methods, and almost every other I could find. I've searched this forum for hours today before posting this, and no matter what I use, I get stuck in either a bootloop or i get a reboot after a minute of being booted. I've tried different recoveries, different ROMs, different flashing methods, and it all ends up the same way.
if you've actually tried things you might want to post exactly what you have tried what were the outcomes and so on and so on. I'm not going to assume what you have tried and assume what the process you did and where you might have messed up. I'm sure neither is anyone else. So unless you help me help you we together are not going to get anywhere.
To the best of my recollection, here's how it went down:
Started off with running Genesis v1 Beta 6.
Ran G2x batch clean up tool w/ CWM Touch
Flashed cyanogen_p999-ota.eng.feli.zip in CWM
* At this point my phone would not make it past more than 1 minute after booting. It would boot up, but after approx. 1 minute, it would reboot, no matter what I did w/ it. This happened several times
Wiped everything through CWM, flashed Genesis again (default install)
*Had same reboot issues listed above
Used NVFlash to push stock V21e firmware http://forum.xda-developers.com/showthread.php?t=1248644
*After this, My phone would not make it past the "T-Mobile G2x with Google" splash screen. You would hear the T-mobile jingle, then the screen would "get stuck" for about one minute, and then the phone would reboot and go through the LG logos to the splash screen and repeat endlessly until I performed a battery pull
Restored stock recovery using NVFlash
*Did a reboot and suddenly saw the boot animation from Genesis!? Not sure how that happened, but it never made it past the boot animation
Ran G2x batch clean up again to try to "clean" the phone, and pushed the V21e firmware again
*Same boot problem
Flashed stock recovery again, then attempted to use KDZ. KDZ will continue to force close midway through the operation, and I cannot get it to work
Pushed V21e yet again
*Now it started making it to the initial set-up "Touch the android..." dialog. I could actually make it through this part, and then the phone would reboot again
*Somewhere in the middle of this, my battery went from reading 95%(The few times it would actually boot) to reading 0%. I wiped battery stats in CWM, but it didn't fix it. "Hey, maybe my battery actually died," I thought, so it's now on the wall charger, waiting for me to try to rescue it again.
I'm going to *attempt* to install a nandroid in CWM, and pray that it fixes things, but if that does not work, I'm at a complete loss
mt3g said:
if you've actually tried things you might want to post exactly what you have tried what were the outcomes and so on and so on. I'm not going to assume what you have tried and assume what the process you did and where you might have messed up. I'm sure neither is anyone else. So unless you help me help you we together are not going to get anywhere.
Click to expand...
Click to collapse
+1
More info would be great!
If I were you, would give a shot of mansa_noob's clean up tool:
http://forum.xda-developers.com/showthread.php?t=1590523
It will reorganize your partitions. Then you just need to flash CWM recovery, then the stock ROM.
Edit:
Just saw your new post, wow that's interesting. I'm not too sure if the touch CWM has anything to do with it, how about to try the normal recovery version of the clean up tool, then maybe a different stock ROM?
Sent from my LG-P999 using xda premium
the only thing I can think of will get me flamed lol, don't use those clean up tools unless it is a last resort! I can say I've never had an issue with just flashing after going through mounts and storage (data, system,cache) and wiping the main things.
The fact that the phone can be booted and it is showing images on the screen means you are not bricked. On the other hand, I've yet to read the issues you are describing, ever. You got quite mess on your hands.
KDZ is your best bet, what do you mean it just "continues to force close"
DupleX01 said:
+1
Just saw your new post, wow that's interesting. I'm not too sure if the touch CWM has anything to do with it, how about to try the normal recovery version of the clean up tool, then maybe a different stock ROM?
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
Tried CWM 5.0.2.0, also. I've tried both the stock ROM and the basic cyanogen ROM (Sorry, can't remember exactly where in the cycle those fell...I've repeated several steps several times)
Alright, so It's fixed! Thanks for the interest.
Just for the sake of somebody who (somehow) might have something similar, here's what fixed it....and be warned, this is QUITE unorthodox:
My phone was fully charged (turned off, showing the charged battery icon). I removed the battery, the SIM, and the SD card, and stuck my phone in the fridge for about 10 minutes...That's right, the fridge. I read somewhere that this may help when writing to the disk, and I figured "why not?"
I then pushed V21e using NVflash again, and, lo and behold, it works like a champ! Now just to get the latest OTA update, sit back, and wait for the latest and greatest ROMs to trickle down.
Also, sorry about the original post being kind of vague...It was posted after literal hours of searching and trying different things, and the frustration clouded my brain.
that is crazy lol, but glad something worked for you...
mt3g said:
the only thing I can think of will get me flamed lol, don't use those clean up tools unless it is a last resort! I can say I've never had an issue with just flashing after going through mounts and storage (data, system,cache) and wiping the main things.
The fact that the phone can be booted and it is showing images on the screen means you are not bricked. On the other hand, I've yet to read the issues you are describing, ever. You got quite mess on your hands.
KDZ is your best bet, what do you mean it just "continues to force close"
Click to expand...
Click to collapse
Hey buddy. I won't flame. You are absolutely right. I don't use the cleanup tool a lot either but then since my bluetooth issue is fixed I am slacking .
I am curious though why it did not work but will respond to op in a minute.
Sent from my LG-P999 using XDA
rtotheichie said:
Alright, so It's fixed! Thanks for the interest.
Just for the sake of somebody who (somehow) might have something similar, here's what fixed it....and be warned, this is QUITE unorthodox:
My phone was fully charged (turned off, showing the charged battery icon). I removed the battery, the SIM, and the SD card, and stuck my phone in the fridge for about 10 minutes...That's right, the fridge. I read somewhere that this may help when writing to the disk, and I figured "why not?"
I then pushed V21e using NVflash again, and, lo and behold, it works like a champ! Now just to get the latest OTA update, sit back, and wait for the latest and greatest ROMs to trickle down.
Also, sorry about the original post being kind of vague...It was posted after literal hours of searching and trying different things, and the frustration clouded my brain.
Click to expand...
Click to collapse
I am afraid if my theory is correct your flash (memory) may be going. The symptoms you have described and the fix you mention would suggest a data retention problem. If it breaks again (i hope that I am wrong and it won't) you may have to stick it in the fridge again but if that happens get rid of it fast!
Sent from my LG-P999 using XDA
rtotheichie said:
Alright, so It's fixed! Thanks for the interest.
Just for the sake of somebody who (somehow) might have something similar, here's what fixed it....and be warned, this is QUITE unorthodox:
My phone was fully charged (turned off, showing the charged battery icon). I removed the battery, the SIM, and the SD card, and stuck my phone in the fridge for about 10 minutes...That's right, the fridge. I read somewhere that this may help when writing to the disk, and I figured "why not?"
I then pushed V21e using NVflash again, and, lo and behold, it works like a champ! Now just to get the latest OTA update, sit back, and wait for the latest and greatest ROMs to trickle down.
Also, sorry about the original post being kind of vague...It was posted after literal hours of searching and trying different things, and the frustration clouded my brain.
Click to expand...
Click to collapse
Yet another proof of G2X's unbrickable fame with a happy ending.
Happy for you!
Sent from my LG-P999 using xda premium
Hi, first post, and attempting to stick to forum rules and customs as much as possible... I have a question about recovery mode on my T-Mobile G2x (LG Optimus 2x). A couple months back, I was finally looking into modding and choosing a ROM. However, before doing any of that, I thought it smart to try a nandroid backup, which to my knowledge can be achieved through recovery mode (which I looked up, and found could be accessed with power button/volume down). So I tried it out and successfully booted into recovery mode. Satisfied that I was capable of that I rebooted, and to my serious disappointment and frustration, everything (almost) was gone. Contacts, messages, apps, the whole shebang. Interestingly, however, my pictures/media files remained, along with root access, and certain files I had stored internally. Other than that, I was looking at my phone like it was on day one. Since then, I've been too scared to try anything sketchy at all, and I've been religiously backing up everything with TitaniumBackup. What I want to know is, why did my phone reset like that, why did certain things remain, and how can I safely go about doing a nandroid backup now? I'd rather not delete everything again...
Apologies if that was long, but I hope I've made things clear enough! If you need more information, or if I'm an unknowing rulebreaker, please let me know.
Thanks in advance!
Well. Lol recovery mode on stock does a factory reset. Thats why you lost everything. You need to flash custom recovery via nvflasher before you can make your nandroid backup. There are step by step guides on how to do everything on your g2x. Btw the g2x is not the o2x. Their software is not compatible without porting, so make sure you have the lg p999 and not the lg p990. Search guide to getting started with your g2x ,assuming you are on the p999, everything you need to know is there.
EDIT: Guide is here http://forum.xda-developers.com/showthread.php?t=1060715
[REF][Guide/Tutorial] Getting Started Modding Your T-Mobile G2x
You need to flash clockworkmod for custom recovery options, backup, and flashing roms. Rooting it is just a tiny step.
Sent via Acer Iconia A100 on CM10_Build090212; godmachine v2.0 kernel, Smooth, Stable, Fast
Wow haha. That's obviously where I got confused... totally new to this stuff! If I remember right I was following instructions from a couple different sites at once.. good grief. But thanks for putting it in plain english! So yeah, mine's the p999 and I've actually been to the guide page before. However I think I had seen something else and was under the impression that there was a way I could do a nandroid backup beforehand. One thing though, I guess now I'm wondering what exactly a factory reset even does. Evidently it erases all apps and settings and such, but why do pictures and files remain along with root access? Just curious. If there's a guide to that or a link you know of that I can't find that would be fantastic!
Nonetheless, thanks for being so prompt and helpful!
mattagiii said:
Wow haha. That's obviously where I got confused... totally new to this stuff! If I remember right I was following instructions from a couple different sites at once.. good grief. But thanks for putting it in plain english! So yeah, mine's the p999 and I've actually been to the guide page before. However I think I had seen something else and was under the impression that there was a way I could do a nandroid backup beforehand. One thing though, I guess now I'm wondering what exactly a factory reset even does. Evidently it erases all apps and settings and such, but why do pictures and files remain along with root access? Just curious. If there's a guide to that or a link you know of that I can't find that would be fantastic!
Nonetheless, thanks for being so prompt and helpful!
Click to expand...
Click to collapse
Factory reset clears all personal data, just like your phone came out of the box (or the factory). The reason pictures and files remain is probably because they're on your sd card.
AS for root, I believe it's on a lower level than recovery (but I may be wrong)
Sent from my LG-P999 using xda premium
rtotheichie said:
Factory reset clears all personal data, just like your phone came out of the box (or the factory). The reason pictures and files remain is probably because they're on your sd card.
AS for root, I believe it's on a lower level than recovery (but I may be wrong)
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
ya what he said..lol
Sent via G2x on CM7 b135.2 w/faux 52 kernel
Anyone know how I can get the unlock code for my G2x? It's not serviced and probably has bad esn
Sent from my SPH-D710 using Tapatalk 2
I don't know where to post this, I'm coming here all panicked and retarded, so I'm apologizing in advance.
I literally bought my Galaxy S 4G from WIND (Canada) this morning. From what I understood, upgrading the OS was dangerous, all I wanted to do was root... I followed this guide: ht tp ://w ww.gal axyforum s.ne t/forum/off-topic-forum/5053-rooting-tutorial-here-posted-permission-t-mobile-galaxy-s-4g-gingerbread.html (remove spaces)
which I found in a post on these forums. Someone who also was on WIND said it worked fine for them... They were rooted. I foolishly tried it, everything seemed FINE. When I load CWM it can't mount my SD card. I don't know what to do, it's stuck in T-Mobile boot screen loop if I try to exit.. I literally just stopped crying. My dad is going to KILL me if he finds out I ****ed up the new phone I just bought HOURS ago. I don't know what the **** to do, I don't know what's wrong. I need help, please. Anybody know what I can do? I don't care about rooting, I just need my device to work. Please, someone, anyone with any idea, what should I do? I can get back into download mode, and CWM. Is there anything I can do there? There's a recovery guide pinned but it says it's for the T-Mobile version, which I read is the same, can I use that to fix my phone?
This is my first Android device, I've never owned one before. I don't know ****, I shouldn't have tried anything... I just got cocky and made a mistake. I'm usually very good with this kind of stuff. Please someone tell me if there's something I can do to fix this, please!
I'm sorry if I sound stupid, I'm trying not to, I'm just really panicky and stressed right now.
I've tried searching through the forums - I still am searching through them, I'm sorry if I missed a post that can help me.
EDIT: I found someone who is also stuck in a boot loop... He seems to have SD Card issues as well, but doesn't speak English very well, so I don't thing he was able to communicate what his issue was...
Quote:
Originally Posted by GMK63
.......(---------THAT WHAT I FOLLOWED .
But I did the first part and They said i should get the stuff I store on my SD Card to pull out a file (``12) In CWM, use your volume up/down positions to navigate, scroll down to "Install Zip From SDcard". Select with a click of the power button. Navigate to where you put sms-T959V-KJ6-v0.1.1-rc1-unsigned-update.zip (in the root of your SDcard) and select with the power button. Confirm you want to install.
``)
but it doesn't give me the option to go get it on my SDcard and Now my Phone just turns on and off with the samsung galaxy S logo plus T-mobile exclusive logo . The only possitive thing about all the damage is that I can still put my phone on dowload mode and I just think if someone knows how to get my phone back to it state they will need me to put it on download mode.
Thank you in advance for your Help, for replying and offering to help.
I appriciate it. My phone is Mobillicity carrier just like wind .[/B]
Then, user bhundven replies to him saying:
Ok, this is really simple. I've explained it in quite a few threads in the Galaxy S 4G forums in General, Q&A, and the Dev forum. I'm going to explain this, but in a way to be more general. So I'm being verbose in case anyone else with a T959W happens to run across this and has not tried anything yet.
Again, I'm not good with windows at all, and I prefer it that way.
If you're on windows, check out our wiki:
http://forum.xda-developers.com/wiki...xy_S/SGH-T959V
There is tons of help there for setting up heimdall on windows with all the right drivers and such.
Once you have heimdall setup get AntonX's latest cwm zip for his kernel.
This kernel is a BML kernel, and this guide I am giving you right now will help you get cm9 installed which is an MTD kernel. You can find out more about BML vs. MTD here.
Once you have downloaded AntonX's kernel, extract the zImage from it and open up the terminal/cmd prompt and navigate to the directory you extracted the zImage to.
Put your phone into Download Mode and type the following in the command prompt:
Code:
heimdall flash --kernel zImage
The heimdall program will flash this kernel+initramfs to the kernel partition and reboot the phone. Do not unplug the usb cable until you see the "Galaxy S" screen. When you see that screen, unplug the usb cable and remove the battery from the back.
Assuming you downloaded CM9 and put it on your sdcard already, you can get into recovery by holding the vol+ and vol-, then pressing the power button to turn the phone on. When you see the "Galaxy S" screen, let go of the buttons, and you should be in the recovery now.
This is where things get a little tricky. If you have not tried to do anything to your phone yet. This would be a great time to use the "Backup and Recovery" menu on CWM. Do a full backup.
The "assert 7" error that the previous person got was because the cwm install script (the updater-script) checks the already installed /system/build.prop's data against the "to be installed" build.prop to verify this rom can be installed. If it doesn't exist, then it moves forward.
So the first order of business is to wipe the /system partition. Go to "Mounts and Storage" and format the system partition.
Now go back to the main screen and do "Factory Reset/Wipe Data".
Now go "Install zip from sdcard" -> "choose zip from sdcard" -> and use the volume keys to select the zip file.
After the rom is installed, navigate back to the main screen and "Reboot the system now" if it doesn't reboot by itself.
When the phone reboots, because it is going from BML to MTD, it obviously can't just install the files to what would be an MTD partition if the kernel knows nothing about MTD. So it boots into the newly installed MTD kernel and continues the installation, which in the end will also reboot again.
The first boot is very slow. It is building a cache of all the pre-installed system applications. Let it sit for a while. I know it's tempting to go play with your phone right away, but resist if you can.
The next CM9 release will be on a different kernel, and albeit a much better rom.
I will also be adding OTA Asserts for SGH-T959W so that you will not have to wipe /system before installing the rom, but I do that still just for good measure. But this also means that your phone will work properly with the google play store.
If this still does not work, please let me know what went wrong and I will be happy to assist!
-Bryan
Is what Bryan is saying my solution? I don't think he understood the SD Card mount issue. Does anyone know how to fix that? I really hope to hear from you guys ASAP before my dad catches on... Please. I really need help. I'll search more in the morning, it's 1 AM here.
Okay well first of all.. GET A GRIP OF YOUR SELF
*slaps twice across the face
This phone is unbrickable so can you get in to download mode? (power off phone then when it's off hold the volume up and down buttons at the same time, while holding them down connect your phone to a usb cable)
A green android digging thing should show on your screen. Tell me when you get this far.
Sent from my HTC VLE_U using xda app-developers app
As a matter of fact, you don't entirely need a download mode screen to recover your device too. I've gotten to a pixelized colorful screen and thought my phone was done for, but Odin/Heimdall still recognized it, so I was able to recover my phone.
Calm down and as long as your phone can still be detected on your computer, you will be fine. Odin or Heimdall should be able to show that he device was "added" when you plug it in.
bkoon1218 said:
As a matter of fact, you don't entirely need a download mode screen to recover your device too. I've gotten to a pixelized colorful screen and thought my phone was done for, but Odin/Heimdall still recognized it, so I was able to recover my phone.
Calm down and as long as your phone can still be detected on your computer, you will be fine. Odin or Heimdall should be able to show that he device was "added" when you plug it in.
Click to expand...
Click to collapse
That's true, just make sure you have the drivers installed for the phone first and for the purpose of my method of recovery download Odin. If you did everything correctly you'll see a green light in Odin under recognized devices once you're in download mode
Sent from my HTC VLE_U using xda app-developers app
lonoguge said:
Okay well first of all.. GET A GRIP OF YOUR SELF
*slaps twice across the face
This phone is unbrickable so can you get in to download mode? (power off phone then when it's off hold the volume up and down buttons at the same time, while holding them down connect your phone to a usb cable)
A green android digging thing should show on your screen. Tell me when you get this far.
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
Thanks for the slaps, I needed them!
Yes! I think I am still able to get into download mode, atleast I was able to last night (After the loop issue). Also, I formatted (factory reset option or something?) my settings when I was in CWM last night assuming that would change it back to the way it was, or atleast fix the SD mount problem..I hope this doesn't cause any issues.
What should I do when I'm in download mode?
bkoon1218 said:
As a matter of fact, you don't entirely need a download mode screen to recover your device too. I've gotten to a pixelized colorful screen and thought my phone was done for, but Odin/Heimdall still recognized it, so I was able to recover my phone.
Calm down and as long as your phone can still be detected on your computer, you will be fine. Odin or Heimdall should be able to show that he device was "added" when you plug it in.
Click to expand...
Click to collapse
That's great news! It's nice to hear that someone who's phone was also messed was able to repair it.
lonoguge said:
That's true, *just make sure you have the drivers installed for the phone first and for the purpose of my method of recovery download Odin. *If you did everything correctly you'll see a green light in Odin under recognized devices once you're in download mode
Click to expand...
Click to collapse
Where can I get these drivers? Should I download the latest version of Odin?
I'll try this as soon as I get back from taking my little sister to school.
I just want to say again, this is the SGH-T959W from WIND in Canada. It's apparently the same hardware as the SGS4G from T-Mobile, just different software. I hope this isn't a problem.
Thank you both for replying so soon. After tossing and turning in bed for the last 5 hours, barely getting any sleep, it's such a relief to read these posts!
Obviously you didn't read too much if you bought the phone and tried to mess with it the same day. You would have seen if you went to the 2nd page of here and actually read something like this, http://forum.xda-developers.com/showthread.php?t=1552119 where I clearly say, it is it different, you will get boot looped, I am working on a package to fix it, and for anyone on a wind phone to hold on and wait.
I don't have time to try and help and fix every single wind phone in the world because people get too impatient and start flashing everything in the world from the first post they read. Odin and Heimdall fail at certain parts of flashing this phone. I am trying to give the Heimdall creator as much as I can to help fix this, so everyone telling to flash this or that package, it's not going to work, it will fail. I have verified this 100 times with Heimdall.
I can't put together a 1click package that fails flashing, that's why people are ending up in this position in the first place.
I can get your phone fixed but not right this second. There is no permanant damage done, and the less you just keep flashing random stuff, the more likely the chance I can help you fix it, but I'm busy, I run my own business and my paying customers come first as does my mortgage and bills before spending an hour teamviewed into someones pc to fix this.
So hang tight, I will try later to get this fixed, it's not screwed, quit flashing anything you find.
Past what getochkn just said (and please do ignore the "advice" given by people who don't experience with a T-959W), next time you see a "helpful" post on some site that starts off "get this from [the original source]" -- please, please take the time to read the original source.
Secondly, just because your phone has the a similar "trade name" as another phone doesn't mean they are even close to the same inside. Even the model numbers don't mean much. Firmware from a T-959 generally won't work on a T-959V, and, as you have found out, T-969V firmware can make a T-959W a nice paperweight for a while.
Thirdly, I just don't "get" why people even consider flashing their phone on the first day they own it, before they have any idea what it came with and what it can do, not to mention voiding their warranty before even the buyer's remorse period has expired.
While you're waiting for someone to bail you out, you might want to take the time to download Java, the Microsoft C++ executables, and a full version of Heimdall.
getochkn said:
Obviously you didn't read too much if you bought the phone and tried to mess with it the same day. You would have seen if you went to the 2nd page of here and actually read something like this, http://forum.xda-developers.com/showthread.php?t=1552119 where I clearly say, it is it different, you will get boot looped, I am working on a package to fix it, and for anyone on a wind phone to hold on and wait.
I don't have time to try and help and fix every single wind phone in the world because people get too impatient and start flashing everything in the world from the first post they read. Odin and Heimdall fail at certain parts of flashing this phone. I am trying to give the Heimdall creator as much as I can to help fix this, so everyone telling to flash this or that package, it's not going to work, it will fail. I have verified this 100 times with Heimdall.
I can't put together a 1click package that fails flashing, that's why people are ending up in this position in the first place.
I can get your phone fixed but not right this second. There is no permanant damage done, and the less you just keep flashing random stuff, the more likely the chance I can help you fix it, but I'm busy, I run my own business and my paying customers come first as does my mortgage and bills before spending an hour teamviewed into someones pc to fix this.
So hang tight, I will try later to get this fixed, it's not screwed, quit flashing anything you find.
Click to expand...
Click to collapse
THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU!
I really didn't read enough, big mistake, I was just really cocky because I've modded almost every device I own (Wii, PSP, PS3, PS2 various and iDevices [mine, and friends]). Of course, they're all different (Not saying it's all the same thing! ), I just felt very confident because I've never had issues with anything before. At least this is a good learning experience, I've really been put in my pace. I always felt that bricking was something that happened to other people, it doesn't happen to me. I know that sounds stupid, but idk, that's just how I felt. I physically feel sick over this 'whole ordeal (Seriously), I'm such an idiot. >.<'
Thanks for the warning, I won't flash anything! I'm so relieved to hear that there's no permanent damage done, and to be able to speak to someone who's familiar with this specific problem and this specific model of the SGS4G, AND is willing to help me!
Do you know when you'll be able to help me? Of course, take your time, I completely understand that you have other stuff going on, I'm just wondering to see if I can maybe think of some cover up so my dad doesn't find out.
Also, I have a 14 day warranty, is it void now even though the root didn't work? I'm assuming it is.
Edit: Yup, if what jeffsf says is true, it's void.
jeffsf said:
Past what getochkn just said (and please do ignore the "advice" given by people who don't experience with a T-959W), next time you see a "helpful" post on some site that starts off "get this from [the original source]" -- please, please take the time to read the original source.
Secondly, just because your phone has the a similar "trade name" as another phone doesn't mean they are even close to the same inside. Even the model numbers don't mean much. Firmware from a T-959 generally won't work on a T-959V, and, as you have found out, T-969V firmware can make a T-959W a nice paperweight for a while.
Thirdly, I just don't "get" why people even consider flashing their phone on the first day they own it, before they have any idea what it came with and what it can do, not to mention voiding their warranty before even the buyer's remorse period has expired.
While you're waiting for someone to bail you out, you might want to take the time to download Java, the Microsoft C++ executables, and a full version of Heimdall.
Click to expand...
Click to collapse
I'm just very impatient sometimes. I really do enjoy doing this kind of stuff, it's fun for me. I just got really excited and wasn't thinking straight and just went out and tried rooting it. I've wanted an Android for a while now, and have always planned to root it to unlock it's full potential. I've never modded anything else day 1 (and never will again), this is the first time I've done this. I feel terrible about it.
Will do, thanks for helping, jeffsf.
If your still under 14 days return it with a stupid I don't know what happened look. If its stuck just on the tmob screen they most likely will never know what you did. Your other choice is to be a man and own up to it. Tell your dad and take your lumps. That choice is yours. Give it serious thought before you choose as it might define what type of person you end up becoming.
hechoen said:
If your still under 14 days return it with a stupid I don't know what happened look. If its stuck just on the tmob screen they most likely will never know what you did. Your other choice is to be a man and own up to it. Tell your dad and take your lumps. That choice is yours. Give it serious thought before you choose as it might define what type of person you end up becoming.
Click to expand...
Click to collapse
I feel like they might know. I'm willing to try it as a last resort, I'd like to give getochkn a shot first.
I'll tell my dad what happened after it's fixed. I just can't deal with him stressing me out about it more than I already am.
I will have a package probably tomorrow that will provide as detailed instructions as I can.
getochkn said:
I will have a package probably tomorrow that will provide as detailed instructions as I can.
Click to expand...
Click to collapse
Oh, wow! That's much sooner than I was expecting! Thanks for taking the time to do this for me, it really means a lot. Thank you so much getochkn!
Package and instructions here.
http://forum.xda-developers.com/showthread.php?t=1956025
getochkn said:
Package and instructions here.
http://forum.xda-developers.com/showthread.php?t=1956025
Click to expand...
Click to collapse
Thank you so much getochkn!
I read all the instructions before attempting this. But, I have a problem. Heimdall failed to flash. It said something about failing to retrieve the PIT or something? So, I tried again. Didn't work. So, I restarted my computer, and my phone.
Phone doesn't go into download mode, instead, I end up on a screen saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
What should I do?
BagelBreath said:
Thank you so much getochkn!
I read all the instructions before attempting this. But, I have a problem. Heimdall failed to flash. It said something about failing to retrieve the PIT or something? So, I tried again. Didn't work. So, I restarted my computer, and my phone.
Phone doesn't go into download mode, instead, I end up on a screen saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
What should I do?
Click to expand...
Click to collapse
That firmware screen should detect as download mode still in Heimdall. I have gotten that and reflashed from Heimdall before. Not sure why it's trying to download the pit, it should only do that when you tell it to download pit. Flashing shouldn't trigger that. See if Heimdall will detect it in that firmware recovery mode and I guess try again, otherwise your phone is really borked.
getochkn said:
That firmware screen should detect as download mode still in Heimdall. I have gotten that and reflashed from Heimdall before. Not sure why it's trying to download the pit, it should only do that when you tell it to download pit. Flashing shouldn't trigger that. See if Heimdall will detect it in that firmware recovery mode and I guess try again, otherwise your phone is really borked.
Click to expand...
Click to collapse
Thank you for the quick reply!
It worked! I really can't thank you enough! Thanks again for taking the time to do this!
I think it may have said "Uploading Pit" because it said it again this time, but it didn't encounter a problem when it did that.
I know I have 3 choices, the one I would like to choose is ICS. Would mind pointing me in the direction of an ICS ROM that's compatible with my device? I'm afraid to use something that may not work and mess up my phone again.
EDIT: Actually, I think I'll just stick with this. I just installed the twist kernal and the modem, everything works, I'm rooted and have recovery. I'd rather not mess with it until I'm more experienced with droids.
Thanks again everyone, especially you getochkn! I'm so relieved that my phone is working again! My dad didn't notice that I wasn't using the new phone I got, so I didn't have to cover up or anything.
Hello, all. I hope someone can help me with my SGH-T959W. Right now I'm at the point where the phone has CWM installed, but will only boot into recovery no matter what I do. I've followed the N00b guide to Flashing/Fixing the SGS4G, but clearly I'm missing something.
I tried to follow the Windows-based procedure for the SGH-T959W, but was unable to get version 1.40 to execute, and was unable to locate version 1.31.
So, given that the SGH-T959W and SGH-T959V are the same phone except for the bootloader, I tried the Java-based Stock KJ-6 + Root. The first time I tried it, the upload failed after the PIT, and the phone was no longer able to boot into anything other than download mode. I eventually managed to get it to the point where it tried to flash the modem, but I was never able to get the modem to flash successfully. I tried both under Windows and Linux, using two different PCs and every USB cable I could find, since I know those tend to be dodgy. Still, I've never gotten past flashing the modem, though sometimes it's done worse.
But at this point, I had a phone that would dutifully boot into CWM, so I could change strategy anyway. So I grabbed the unofficial Cyanogenmod 10.1, copied it to the root of the SD card, and tried to load that via CWM. It failed the hardware check.
That's problem #1. Is it possible to modify Cyanogenmod to check for the 959W instead of only the 959V?
Now, problem #2. I decided to give Slim ICS a whirl, since it's light on requirements and a 512MB/1GHz device would probably appreciate a lighter load. The two packages claim to install, but the progress bar never reaches 100%, and when I try to boot the phone, it just boots into CWM. It's a newer version of CWM now, and the startup logo is different, so something worked, but clearly not everything.
When installing, I did mount UMMU, factory reset, wipe the cache and the Davlik cache, mount UMMU, install, then fix perms. But I still get that loop back to CWM.
So something critical didn’t take, however many times I tried (I've lost count, but I think I'm going on 10), and I don't know the architecture well enough to know where to start looking. I'm pretty comfortable with other operating systems, but this is only the second Android device I've tried to customize.
I suspect I can’t solve any other problem until I solve problem #2, regardless of which distro I end up wanting to run.
Sorry for the long-winded post, but I figured the more questions I answered up front, the better the chances of fixing this would be.
Thanks for any help you're willing to offer a n00b.
Dave F.
I think what you were doing with heimdall is the way to go except the t959w doesn't like modems and I think there's some way to leave out the modem part but eh.. I'm not that well versed. Anyway here's a link that may or may not be relevant
http://forum.xda-developers.com/showthread.php?t=1956025
Please read forum rules before posting.
Questions and request for assistance go in the Q&A section.
Thread has been moved.
Thank you for your future attention to this.
Have a great day!
dfarquhar said:
Hello, all. I hope someone can help me with my SGH-T959W. Right now I'm at the point where the phone has CWM installed, but will only boot into recovery no matter what I do. I've followed the N00b guide to Flashing/Fixing the SGS4G, but clearly I'm missing something.
I tried to follow the Windows-based procedure for the SGH-T959W, but was unable to get version 1.40 to execute, and was unable to locate version 1.31.
Click to expand...
Click to collapse
Look here for 1.3.1.
dfarquhar said:
So, given that the SGH-T959W and SGH-T959V are the same phone except for the bootloader, I tried the Java-based Stock KJ-6 + Root. The first time I tried it, the upload failed after the PIT, and the phone was no longer able to boot into anything other than download mode. I eventually managed to get it to the point where it tried to flash the modem, but I was never able to get the modem to flash successfully. I tried both under Windows and Linux, using two different PCs and every USB cable I could find, since I know those tend to be dodgy. Still, I've never gotten past flashing the modem, though sometimes it's done worse.
But at this point, I had a phone that would dutifully boot into CWM, so I could change strategy anyway. So I grabbed the unofficial Cyanogenmod 10.1, copied it to the root of the SD card, and tried to load that via CWM. It failed the hardware check.
That's problem #1. Is it possible to modify Cyanogenmod to check for the 959W instead of only the 959V?
Click to expand...
Click to collapse
Nope, not a CWM issue. Ever since TeamAcid and I started on CM9 (and I believe the last few CM7 builds) added support for T959W. Almost everyone (thankfully! ) has kanged those device trees and also support T959W. I'm sure other T959W users will chime in to tell you that 97% of all roms here work on T959W. (GB and forward)
dfarquhar said:
Now, problem #2. I decided to give Slim ICS a whirl, since it's light on requirements and a 512MB/1GHz device would probably appreciate a lighter load. The two packages claim to install, but the progress bar never reaches 100%, and when I try to boot the phone, it just boots into CWM. It's a newer version of CWM now, and the startup logo is different, so something worked, but clearly not everything.
When installing, I did mount UMMU, factory reset, wipe the cache and the Davlik cache, mount UMMU, install, then fix perms. But I still get that loop back to CWM.
Click to expand...
Click to collapse
Crazy mount setups shouldn't matter anymore. That was an oldschool Froyo/Early GB thing. Almost all new CWM install scripts do the right thing now.
dfarquhar said:
So something critical didn’t take, however many times I tried (I've lost count, but I think I'm going on 10), and I don't know the architecture well enough to know where to start looking. I'm pretty comfortable with other operating systems, but this is only the second Android device I've tried to customize.
I suspect I can’t solve any other problem until I solve problem #2, regardless of which distro I end up wanting to run.
Sorry for the long-winded post, but I figured the more questions I answered up front, the better the chances of fixing this would be.
Thanks for any help you're willing to offer a n00b.
Dave F.
Click to expand...
Click to collapse
I like the long posts! Especially when then they contain more detail for me to help you figure out your problem with. I'm also partial to the short posts that include logs!
TwitchyEye said:
I think what you were doing with heimdall is the way to go except the t959w doesn't like modems and I think there's some way to leave out the modem part but eh.. I'm not that well versed. Anyway here's a link that may or may not be relevant
http://forum.xda-developers.com/showthread.php?t=1956025
Click to expand...
Click to collapse
@TwitchyEye you're right That is the heimdall oneclick that should be used.
@dfarquhar I think using the heimdall oneclick that @getochkn made should be the right path for you. Make sure you use the right version of heimdall. Make sure you completely remove the old version (software and drivers), use zdiag to make absolutely sure!
If all else fails, post here again! (maybe with logs )
Thanks everyone. I grabbed v 1.3.1, so I'm getting ready to try it now.
If anything goes wrong, I'll look into where the logs are stored and how to retrieve them, and I'll be back. Assuming I can't use the logs to figure it out on my own of course.
dfarquhar said:
Thanks everyone. I grabbed v 1.3.1, so I'm getting ready to try it now.
If anything goes wrong, I'll look into where the logs are stored and how to retrieve them, and I'll be back. Assuming I can't use the logs to figure it out on my own of course.
Click to expand...
Click to collapse
Sometimes, it's just the output you see on your screen is a good enough log
bhundven said:
Sometimes, it's just the output you see on your screen is a good enough log
Click to expand...
Click to collapse
Got it working! Heimdall 1.3.1 was the key. I then turned around and flashed Slim ICS since I had it on the SD card already, and it worked. I'm debating whether to move on to Slim Bean, but maybe I need to leave well enough alone for a few days now that I have a working phone.
Thanks again,
Dave