Related
I just got my Samsung Infuse 4G, and I'm very interested in learning to flash to improve the performance of my new toy, but I'm kinda intimidated lots to learn and seems like a steep "learning curve. Can someone point me in the right direction on a good place to start (good reading).
I'm most interested in using the Zeus ROM as it seems to not lose any functionality, uses the most current modem, allows for overclocking. Is there anything else I shouldn't flash with this ROM I've. heard things mentioned in other threads like, lag fixes, different kernels, and other various fixes. But like I said I'm a noob and have a ton of questions even about the most basic of topics.
All I've done thus far is installed the free version of ROM manager, used the flash Clockworkmod recovery, and used the backup current ROM (which would be the stock one). I'm a little scared to proceed as after I backed up the current ROM I went looking for the file I named but couldn't find it.
I think what I need most is a good starting point, any help is appreciated.
dginsd said:
I just got my Samsung Infuse 4G, and I'm very interested in learning to flash to improve the performance of my new toy, but I'm kinda intimidated lots to learn and seems like a steep "learning curve. Can someone point me in the right direction on a good place to start (good reading).
I'm most interested in using the Zeus ROM as it seems to not lose any functionality, uses the most current modem, allows for overclocking. Is there anything else I shouldn't flash with this ROM I've. heard things mentioned in other threads like, lag fixes, different kernels, and other various fixes. But like I said I'm a noob and have a ton of questions even about the most basic of topics.
All I've done thus far is installed the free version of ROM manager, used the flash Clockworkmod recovery, and used the backup current ROM (which would be the stock one). I'm a little scared to proceed as after I backed up the current ROM I went looking for the file I named but couldn't find it.
I think what I need most is a good starting point, any help is appreciated.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1437548
edit: welcome and have fun
edit edit: play with for froyo first..discover your phone. read up as much as your can for a week or two..then if you still want to, go ahead.
qkster said:
http://forum.xda-developers.com/showthread.php?t=1437548
edit: welcome and have fun
edit edit: play with for froyo first..discover your phone. read up as much as your can for a week or two..then if you still want to, go ahead.
Click to expand...
Click to collapse
Can't see anything to add.. Maybe check our the Infuse superthread which is stickied in dev section.
And definitely play with froyo. Feel and KNOW Android. Then you will know how your phone works and is supposed to play. You will appreciate the the custom roms all the more.
Sent from my SAMSUNG-SGH-I997 using Tapatalk
I'd recommend Titanium Backup & Dropbox, they've come in pretty handy for me. And pay close attention when instructions say to wipe! I'm pretty new at this too, but I grasped the importance of the wiping after reading through a few threads and seeing what happened to those who forgot/didn't.
Radiotsar said:
I'd recommend Titanium Backup & Dropbox, they've come in pretty handy for me. And pay close attention when instructions say to wipe! I'm pretty new at this too, but I grasped the importance of the wiping after reading through a few threads and seeing what happened to those who forgot/didn't.
Click to expand...
Click to collapse
Now, you're tallking Radio.
It only took Erik three months to figure that out..
check out albee's sig...lol
Thanks! I figure if I keep at this, pretty soon I'll be as "functionally illiterate" in Linux as I am in Assembly, SQL and VB.
Radiotsar said:
I am in Assembly, SQL and VB.
Click to expand...
Click to collapse
Wow, you have all the right credentials to be a kernel dev.
qkster said:
Now, you're tallking Radio.
It only took Erik three months to figure that out..
check out albee's sig...lol
Click to expand...
Click to collapse
Woah what! Lol...
Sent from my SAMSUNG-SGH-I997 using Tapatalk
Yes...+1...know froyo and your phone first, and read, especially if you plan on flashing a beast lime Zeus....
Sent from my SAMSUNG-SGH-I997 using xda premium
dman3285 said:
Yes...+1...know froyo and your phone first, and read, especially if you plan on flashing a beast lime Zeus....
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
I love lime! It is a wee bit sour. Glad to hear you lime them too... Lol.
Sent from my SAMSUNG-SGH-I997 using Tapatalk
Thought I'd missed some new color theme.
Radiotsar said:
Thought I'd missed some new color theme.
Click to expand...
Click to collapse
No, lol. Dman and his swype. SWIFT KEY FTW!
Sent from my SAMSUNG-SGH-I997 using Tapatalk
Grrrrrr....
Sent from my SAMSUNG-SGH-I997 using xda premium
Thanks all for the suggestions, I'll get to reading.
I've had the phone for about a week and a half and thus far I love it (coming from a dumb phone) and loved it even more when I learned Android is a Linux based system, as I switched to Ubuntu about a year ago.
dman3285 said:
Grrrrrr....
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
Try it dude. Worst case scenario you hate it. Promise you will love it.
Sent from my A500 using Tapatalk
Result of my first flash
OK I've done quite a bit of reading over the last 24 hours familiarized myself with how flashing is done. Thus far I've flashed first the Infusion Kernel found here forum.xda-developers.com/showthread.php?t=1134995 using ROM manager with ClockWorkMod Recovery. Got a little worried at first because it took so long to boot afterwards , but thanks to qkster's noob post I kinda expected it, it helped me a lot, so again thank you for that.
I do have some minor problems and some questions. In ROM manager I selected the option to flash ROM from SDcard, it then prompts me to select the ZIP file to flash and after I select it it asks me what to wipe so I select everything, It then reboots into CWM. I then have to select again flash from SDcard and select the file, my question is am I supposed to have to re-select "flash from SDcard" and re-select the ZIP file to flash? When I flashed the Zeus ROM I didn't do any wiping in CWM because I had selected those options in ROM manager, is this a goof up on my part, was I supposed to wipe again once inside CWM? I ask this because it seems like nothing was wiped, all my apps were still there, settings, pretty much everything. I also have an error right after I boot the phone up and my desktop is loaded, I then get a pop up thats really quick maybe 10 seconds
Code:
The application android system (process system) has stopped unexpectedly please try again[CODE] with a force close button. Everything seems to work fine on the phone so I'd like to know what this error is about, is it linked to me not wiping everything once in CWM?
There is also some instructions for the Zeus ROM that I didn't understand regarding the swype keyboard not installing with the flash and I had an error pertaining that as well. The instructions on the Zeus ROM read as follows [QUOTE]This theme includes a themed swype keyboard (Thanks to nunhugger and studacris). After flash of the theme, Do not open swype, go to root explorer and install it, then it will work flawless. For some reason it will not install on flash, but its all good.
[/QUOTE]
This instruction is listed for the Aries theme (which I tried first) not the ICS revamped, but I'm having the same issue. How do I install Swipe via root explorer. I also really liked the Samsung keyboard any way to get that back? I did use titanium backup for a lot of my apps (haven't restored anything yet, as everything seems to still be there) but I'm not sure I did for the Samsung keyboard. Anyone have an .APK of it they can get to me?
Any help with my issues is greatly appreciated, keep in mind though I'm still a noob so instructions given that a 10 year old can follow are preferred.:p My wife likes the look of my phone now and wants me to do hers too, so I want to make sure I do it right, it's one thing to brick your own phone, quite another to brick your wife's.
dginsd said:
OK I've done quite a bit of reading over the last 24 hours familiarized myself with how flashing is done. Thus far I've flashed first the Infusion Kernel found here forum.xda-developers.com/showthread.php?t=1134995 using ROM manager with ClockWorkMod Recovery. Got a little worried at first because it took so long to boot afterwards , but thanks to qkster's noob post I kinda expected it, it helped me a lot, so again thank you for that.
I do have some minor problems and some questions. In ROM manager I selected the option to flash ROM from SDcard, it then prompts me to select the ZIP file to flash and after I select it it asks me what to wipe so I select everything, It then reboots into CWM. I then have to select again flash from SDcard and select the file, my question is am I supposed to have to re-select "flash from SDcard" and re-select the ZIP file to flash? When I flashed the Zeus ROM I didn't do any wiping in CWM because I had selected those options in ROM manager, is this a goof up on my part, was I supposed to wipe again once inside CWM? I ask this because it seems like nothing was wiped, all my apps were still there, settings, pretty much everything. I also have an error right after I boot the phone up and my desktop is loaded, I then get a pop up thats really quick maybe 10 seconds
Code:
The application android system (process system) has stopped unexpectedly please try again[CODE] with a force close button. Everything seems to work fine on the phone so I'd like to know what this error is about, is it linked to me not wiping everything once in CWM?
There is also some instructions for the Zeus ROM that I didn't understand regarding the swype keyboard not installing with the flash and I had an error pertaining that as well. The instructions on the Zeus ROM read as follows
This instruction is listed for the Aries theme (which I tried first) not the ICS revamped, but I'm having the same issue. How do I install Swipe via root explorer. I also really liked the Samsung keyboard any way to get that back? I did use titanium backup for a lot of my apps (haven't restored anything yet, as everything seems to still be there) but I'm not sure I did for the Samsung keyboard. Anyone have an .APK of it they can get to me?
Any help with my issues is greatly appreciated, keep in mind though I'm still a noob so instructions given that a 10 year old can follow are preferred.:p My wife likes the look of my phone now and wants me to do hers too, so I want to make sure I do it right, it's one thing to brick your own phone, quite another to brick your wife's.[/QUOTE]
If you are running zeus without problem, you must have done something right. The force close when booting up its normal. It will go away when you leave it alone 5 minutes.
You had mentioned that you used ROM Manager, try to avoid that program to flash. Wipe may be ok, idk. I don't use it. I usually wipe or flash in cwm.
In gtg post in the QA, the is a pin up on his original infused ROM thread. Use the cwm installation instruction.
The kernels are in that link.
In order to install something via Root Explorer, you should have that program. You can buy it from Market ....or look for it. When you run it, go to /system/app find the zombie Swype, and install it by click on it. You don't necessarily have to use root explorer, ES Explorer from Market will work as well. Root explorer is a better tool for modding.
Here is another Swype.
forum.xda-developers.com/showthread.php?t=1351512
Click to expand...
Click to collapse
So I know there's been some controversy and scares going around about the US version, since it JUST came out. I'm here to calm you guys down. I have now rooted mine, flashed an interim CWM touch version (not permanent) and have flashed a ROM......ALL successfully.
Here's what I did:
UNLOCKING:
Unlock your bootloader by registering at HTCdev.com and following the unlock instructions. Under device, choose "All other devices", as the One S is not yet listed. It'll walk you through getting your unlock token and flashing it.
ROOTING
Follow Paul O Brien's instructions on rooting your phone. I flashed the r3 superboot file he had. The first time it didnt take and just booted the phone back up. Second time it took, and seems to have stuck, at least for apps. Please note that my phone says *TAMPERED* along with the *UNLOCKED* notification. I have no idea what that means exactly, but everything works great for me.
This means if you dont want to leave Sense but want to get the tons of useless and annoying T-Mobile and other bloatware apps out, you can. T-Mo are dicks and make almost 100% of the apps on it by default SYSTEM apps, therefore unremovable. So you'll need root and Titanium Backup to freeze or delete them. I'd recommend freezing the non-TMo one's just in case.
FLASHING ROMS
1. Flash Paul O Brien's intermin CWM touch version. You MUST use this interim CWM version for the moment, as the others do not work properly. Some things like USB mount dont work in this interim version, but the important functions like wipe and flash, backup and restore, and restart do work. The CWM recovery seems permanent, based on my initial trials, so no worries about reflashing it each restart.
2. Flash your ROM of choice from Clockworkmod Recovery. I'm using Black Dragon right now, but there are others out there as well. I'm personally looking forward to CM9, but its a little ways away, usability-wise.
So there you have it, all you US guys. Don't be afraid to mod your phone. Remember all the warranty void disclaimers as always. I'm not responsible for you bricking your phone. This is just my experience in just under 24hrs of use. Things are looking good for the One S.
bump... i see US users still asking.
Mods, can we perhaps sticky this post of mine? I don't want to take credit for the actual methods of rooting, since Paul O Brien and others deserve that credit, but I think it'd be helpful for US users, since many don't know whether or not the international method works.
That, or perhaps editing the Intl guides to make it clear that the US version accepts the same methods and ROMs.
Worked great for me
Sent from my HTC VLE_U using xda premium
So if we root and flash a custom ROM is there any way to get the phone back to factory state, and get rid of the *TAMPERED* and *UNLOCKED* notification??
Did anyone else get a bit of a sad chuckle out of the first step in the instructions being "remove and reinsert battery"?
cyberchuck9000 said:
Did anyone else get a bit of a sad chuckle out of the first step in the instructions being "remove and reinsert battery"?
Click to expand...
Click to collapse
Great, now my blisters on my fingers will heal.
But still.... I cannot imagine not needing a batt pull.
nickmv said:
Mods, can we perhaps sticky this post of mine? I don't want to take credit for the actual methods of rooting, since Paul O Brien and others deserve that credit, but I think it'd be helpful for US users, since many don't know whether or not the international method works.
That, or perhaps editing the Intl guides to make it clear that the US version accepts the same methods and ROMs.
Click to expand...
Click to collapse
+1
androidcues said:
Great, now my blisters on my fingers will heal.
But still.... I cannot imagine not needing a batt pull.
Click to expand...
Click to collapse
If you need to perform a hard reset on the One S, you hold down the power button for about 7-10 secs.
First of all, thanks for this thread...I used the HTC One S All in one tool kit to unlock my phone, unfortunately I miss understood one of the directions(#5) and stopped using the tool kit and followed another thread, much to my surprise, my bootloader is unlocked, hooray My question is, how do I get back to the original state if that is possible? The reason I ask, is I would like to go back and do it correctly...I used better terminal emulator to see if I had root, but all I got was the $ sign instead of the # sign So I would like to start over...
Thanks in advance for the help
I'm honestly not sure what the procedure is for relocking an HTC bootloader. Perhaps do some Google research on some of the latest models, and I bet you'll find something.
That being said, once you unlock the bootloader a single time, the best you can do is go to **RELOCKED** state. You'll never get back **LOCKED**. Once it's gone it's gone. I'm curious about the **TAMPERED** message though. That's an ugly word.
not sure what exactly went wrong.
somehow flashed CWM and now thats the only thing my phone will boot to, even after re-flashing the stock recovery.
can't get the phone to turn on, only CWM every single time.
suhailtheboss said:
not sure what exactly went wrong.
somehow flashed CWM and now thats the only thing my phone will boot to, even after re-flashing the stock recovery.
can't get the phone to turn on, only CWM every single time.
Click to expand...
Click to collapse
Uh oh that doesn't sound good
Sent from my HTC VLE_U using xda premium
yeah, tried reflashing both CWM & stock recovery. phone still boots to CWM everytime.
Luckily i can still access the phone via ADB, (while in recovery) so i'm sure i'll be able to sort it out. just need to take a fresh crack at it tomorrow. gonna switch back to my galaxy nexus tonight. (oh wait, i dont have any other phones that use microsim)
haha.
Hmm, interesting. Did you flash the interim recovery that Paul O Brien posted, and not another version? Just wanna make sure. I've heard of this happening in my past experience with the Nexus S, but I can't recall what the deal was. Regardless, I don't think you're in trouble. As with your GNex, it's very hard to completely brick the device unless you flash perhaps a bad hboot file, however I'm not really familiar with HTC devices.
This is my first HTC so I'm still trying to learn how the hboot and other processes work together. Sry to hear you had bad luck.
UPDATE: You should try the root install script. It tells the phone to boot after install. That might get you booted atleast.
Some thoughts:
1. Flash the stock recovery back and reflash CWM
2. Clear cache and dalvik within CWM, and make sure to use the 'Reboot System' option if you aren't already.
From what I can tell, your "boot-to-recovery" flag is set on the phone, and isn't getting cleared.
nickmv said:
So I know there's been some controversy and scares going around about the US version, since it JUST came out. I'm here to calm you guys down. I have now rooted mine, flashed an interim CWM touch version (not permanent) and have flashed a ROM......ALL successfully.
Here's what I did:
UNLOCKING:
Unlock your bootloader by registering at HTCdev.com and following the unlock instructions. Under device, choose "All other devices", as the One S is not yet listed. It'll walk you through getting your unlock token and flashing it.
ROOTING
Follow Paul O Brien's instructions on rooting your phone. I flashed the r3 superboot file he had. The first time it didnt take and just booted the phone back up. Second time it took, and seems to have stuck, at least for apps. Please note that my phone says *TAMPERED* along with the *UNLOCKED* notification. I have no idea what that means exactly, but everything works great for me.
This means if you dont want to leave Sense but want to get the tons of useless and annoying T-Mobile and other bloatware apps out, you can. T-Mo are dicks and make almost 100% of the apps on it by default SYSTEM apps, therefore unremovable. So you'll need root and Titanium Backup to freeze or delete them. I'd recommend freezing the non-TMo one's just in case.
FLASHING ROMS
1. Flash Paul O Brien's intermin CWM touch version. Some things like USB mount dont work, but the important functions like wipe and flash and restart do. The CWM recovery seems permanent, based on my initial trials, so no worries about reflashing it each restart. I cant speak for the non-interim solutions, but from what I can gather, they are problematic, so avoid them for now.
2. Flash your ROM of choice from Clockworkmod Recovery. I'm using Black Dragon right now, but there are others out there as well. I'm personally looking forward to CM9, but its a little ways away, usability-wise.
So there you have it, all you US guys. Don't be afraid to mod your phone. Remember all the warranty void disclaimers as always. I'm not responsible for you bricking your phone. This is just my experience in just under 24hrs of use. Things are looking good for the One S.
Click to expand...
Click to collapse
Is this part a must? Would you mind PM'ing me with how to do this part if it's a must? I have Unlocked and rooted my phone, just waiting for a good ROM to come by.
Thongvilay said:
Is this part a must? Would you mind PM'ing me with how to do this part if it's a must? I have Unlocked and rooted my phone, just waiting for a good ROM to come by.
Click to expand...
Click to collapse
That step is only if you want to flash ROMs, or need to wipe cache, dalvik, etc. CWM is used for flashing and recovery/backup purposes. If you're not using ROMs yet, then you have no need for it.
nickmv said:
Hmm, interesting. Did you flash the interim recovery that Paul O Brien posted, and not another version? Just wanna make sure. I've heard of this happening in my past experience with the Nexus S, but I can't recall what the deal was. Regardless, I don't think you're in trouble. As with your GNex, it's very hard to completely brick the device unless you flash perhaps a bad hboot file, however I'm not really familiar with HTC devices.
This is my first HTC so I'm still trying to learn how the hboot and other processes work together. Sry to hear you had bad luck.
UPDATE: You should try the root install script. It tells the phone to boot after install. That might get you booted atleast.
Some thoughts:
1. Flash the stock recovery back and reflash CWM
2. Clear cache and dalvik within CWM, and make sure to use the 'Reboot System' option if you aren't already.
From what I can tell, your "boot-to-recovery" flag is set on the phone, and isn't getting cleared.
Click to expand...
Click to collapse
thanks for the tips, i had tried clearing cache/dalvik within CWM and it still would not work. and yes i did flas the interim CWM from paulobrien
luckily the phone would work via ADB while in CWM. So i pushed three different ROMS to the phone, at first each oen would lock up and reboot within 20 seconds of doing anything. I then went back into recovery & wiped data/cache/dalvik maybe 10 times out of sheer frustration. Then re-flashed a fresh copy of black_dragon_v4.0, didnt do anything after boot. just let it sit there till this morning.
now the phone seems to be working perfectly...
so hopefully if anyone encounters this problem my last couple posts will help them out!
suhailtheboss said:
thanks for the tips, i had tried clearing cache/dalvik within CWM and it still would not work. and yes i did flas the interim CWM from paulobrien
luckily the phone would work via ADB while in CWM. So i pushed three different ROMS to the phone, at first each oen would lock up and reboot within 20 seconds of doing anything. I then went back into recovery & wiped data/cache/dalvik maybe 10 times out of sheer frustration. Then re-flashed a fresh copy of black_dragon_v4.0, didnt do anything after boot. just let it sit there till this morning.
now the phone seems to be working perfectly...
so hopefully if anyone encounters this problem my last couple posts will help them out!
Click to expand...
Click to collapse
Wow, I have no idea dude. That sounds kinda crazy. Hopefully all will be well in the future and you won't come across it again.
the only variable i can think of is that i did have the phone about a week before launch. HTC mailed it to me directly.
I thought maybe that had somethign to do with it, but as far as i can tell the phone was the final shipping version.
I sent you a PM, trying to find a solution.
I've tried searching for the solutions to this, but some of them are difficult to search and I'm struggling to get relevant results. So I apologize if any of this has been covered elsewhere.
Anyhow, I just installed the ParanoidAndroid ROM last night, and it all went very smoothly, and I was pleased. But, there seem to be a couple issues that either I need to iron out, or that the devs need to. And I'm fully willing to believe it's an issue on my end and not theirs, so, here we go:
1) In CWM, the top half of the screen or so has the rainbow glitch going on and there's a de-centered kind of effect happening that makes it very difficult to use.
2) I'm unable to get my external SD card to mount. I've seen plenty of threads about this similar issue, and I've tried tweaking the build.prop entry regarding this, but nothing I'm doing is helping.
3) The flash only works once per boot, even with included flashlight app. I haven't tested the flash's functionality in the camera yet. But in the flashlight app, the flash will turn on, and when I turn it off, it won't come back on until after a reboot.
4) I now have two installations of the stock Gallery app (com.android.gallery3d and com.google.android.gallery3d). I'm sure I can just uninstall one, but is there one that would be wiser to uninstall?
Otherwise, everything else seems to be working just fine. Thank you all very much in advance.
I've since discovered and fixed a new problem. My phone was apparently not sending or receiving any MMS messages, over WiFi or otherwise. But the APNs described in this post fixed that entirely:
http://forum.xda-developers.com/showthread.php?p=23806717#post23806717
As problem #4 from above goes, I deleted the com.android.gallery3d app and kept the com.google.android.gallery3d app as there were internet and syncing features that were omitted or nonfunctional from the former one.
Just so you know, if you read through the paranoid thread in the dev section or any of the ics ROM threads actually, all of your questions r covered. I cangive you answered/jumping off points for your questions.
1. The rainbow distortion comes from having Froyo bootloaders instead of GB. To fix this you will need to use Odin or Heimdall to flash the GB bootloaders. Look in the ISET Super Everything thread that's stickied in the dev section. BE SURE to flash something else with Odin or Heimdall (whichever you choose) before you try flashing the bootloaders. If you lose your connection while trying to flash bootloaders, you can hard brick your phone which basically means you have a shiny coaster.
2. Your external sd card is found in the emmc folder on ics ROMs. You need a root enabled file explorer to open it.
3. Using your camera flash as a flashlight which I believe is referred to as torch is one of the few known remaining bugs on Infuse ics ROMs. The flashlight app that is included is currently the only way to get it working. The flashlight should turn on everytime you open the app but it won't turn back on if you turn it off while in the app.
4. MMS is an issue with the APN settings. Look at the last few pages in the dev section. I know it was recently covered on a couple different ics ROMs threads. To get to the APN settings, go through the following path in the settings.
More (under data usage) > Mobile Networks > Access Point Names, click on the AT&T listing, then change MMS Proxy to 66.209.11.32
I'm pretty sure that is all you have to do to fix MMS but read some dev threads for more info. I think you can also try to look in the Dev Tools app if it is included with the ROM. In the app, click connectivity then start MMS. Again, further reading should give you more info.
Boz™
Sent from my SGH-I997 using xda app-developers app
Yeah, the flashlight thing, I knew was a known bug. But the latest update claiming that "all bugs squashed" misled me, I guess. Because that bug obviously persists. But, c'est la vie.
As the rainbow glitch goes, I never installed Froyo on here, I went from stock to Gingerbread to... actually, here's specifically what happened:
•Initially, I installed 3e Recovery and CWM on my stock Android 2.2 per the instructions here, http://www.youtube.com/watch?v=Y09p-J_g_Rg, and everything went fine.
•Then I flashed Gingerbread UCLB3 per this thread, http://forum.xda-developers.com/showthread.php?t=1508619, but unfortunately, I made a dumb mistake. I neglected to disable Voodoo Lagfix first and softbricked my phone.
•So, I went back to the Infuse Super Everything Thread and found this fix, http://forum.xda-developers.com/showthread.php?t=1092021, brought my phone back to stock, just fine.
•Then I flashed to UCLB3 the same way as before, only this time disabling Voodoo and it all worked perfectly.
•Then I immediately flashed to ParanoidAndroid and everything went as described in the thread and now here I am with the CWM glitch.
So I've only been stock or Gingerbread ever before on my phone.
Anyone know how to simply change the font or install a new one?
Sent from my SGH-I997 using xda premium
I use ROM Toolbox Pro.
Edit: Check the Paranoid Android dev thread end of page 32 and beginning of page 33. The guy that maintains the PA port just posted a link and instructions for the fix to rainbow recovery.
I'm no expert so I may b wrong but I'm pretty sure that if you had a stock AT&T infuse then it most likely came with Froyo originally. Just bc you flashed a GB ROM doesn't mean you got the bootloaders. To get the GB bootloaders, you need to run Heimdall a second time with the "Install Bootloaders" checkbox checked. I'm not exactly sure how it works in Odin but I think you have to have a file in the PDA slot in order to get the bootloaders installed.
I do know that if you have rainbows, it is bc you have Froyo bootloaders. Our at least that is the only reason I've ever heard of and I've read of people with the issue numerous times. I would just read through some of the dev ics threads bc there have been a few times in the last week that I've seen people pay steep by step instructions explaining exactly which Heimdall or Odin to use. I just know that you have to take extra steps to install GB bootloaders. With Heimdall that means checking the flash bootloaders checkbox. They do this bc it can hard brick your phone so they don't want you to install them unless absolutely necessary.
Boz™
Sent from my SGH-I997 using xda app-developers app
Ah-ha! Very good, someone else is having my same problems, lol. I'll definitely be using Odin, as that's how I fixed my softbrick issue and I could never get Heimdall to install on my computer properly (Java issues or something, couldn't figure it out and Odin worked anyway).
Do you know if flashing the bootloader will cause any loss of information or settings? Or will it affect nothing else?
I'm not 100% sure on that one. When I did it, I was using Heimdall to fix my soft bricked phone at the same time so I was basically starting fresh. I'm not sure if it is possible to just flash bootloaders in the Odin PDA slot and keep everything else. I would assume that you would lose everything and have to reflash the ROM from recovery but that's just an assumption.
I would get titanium backup (if u don't already have it) and backup everything and sync with your Gmail account just in case. That way u can save it apps and their settings.
You may b able to ask that question on the PA dev thread and get a better answer.
Boz™
Sent from my SGH-I997 using xda app-developers app
There's an XDA Forum restriction on newbies. I can't post in any Dev forums until I've... done something, I forget. Ten posts or ten thanks. I forget what. Either way, I'm not allowed in there yet. lol
Anyhow, based on some threads I've found, it seems possible to flash only the bootloader in Odin. I'm still just waiting to find out how much information is lost in the process before I dive into it.
But yeah, I do have Titanium, and now that I have everything installed and set up just the way I like it, it is time for a backup anyway.
Supposing I need to, is there any problem restoring system apps and data once I do this? Because everything will be identical, minus the bootloader. I just know I've read enough about the dangers of restoring system data on the threads here to be cautious. Even though I'll just be going from ParanoidAndroid to the same flash of ParanoidAndroid, plus a new bootloader, but better safe than sorry.
Thanks for all your help, man.
Appears as though that question's already been answered here:
http://forum.xda-developers.com/showthread.php?t=1603220&page=5
Bottom of page 5 states somewhat affirmatively that no data will be lost. So, lovely. Now I've just got to flash the bootloader, and then work on my forum searching skills. I can never find ****, when clearly it's somewhere. lol
dstarr3 said:
2) I'm unable to get my external SD card to mount. I've seen plenty of threads about this similar issue, and I've tried tweaking the build.prop entry regarding this, but nothing I'm doing is helping.
Click to expand...
Click to collapse
Figured out the emmc part but how do you actually open the external SD on your pc?
This may not be a traditional Q&A format, but I really wanted to make sure that the plan I have in mind is going to work out for me.
Hi! I'm a noob. I want to flash my first ROM ever after having gotten frustrated beyond belief with how often my Infuse crashes (every few hours I get the triple vibrate to crash). I've already rooted the Infuse and installed CWM though it seems that it was pointless for me to do both of these things as the steps I'm to follow seem to install the both of 'em.
Phone: Samsung Infuse
Carrier: AT&T
Current Firmware version: 2.2.1
Baseband version: I997UCKH1
Kernel version: 2.6.32.9
Build number: FROYO.UCKH1
ROM I want to install: Unofficial CM10
Steps I intend to take:
Back up with Titanium Backup (Free) - Done as according to ctkatz's thread.
I did not do a launcher backup, mostly because I don't know what it is and I don't believe I have one I'm interested in keeping. Also, I didn't use Rom Manager to make a nandroid backup since in the threads I've read the general consensus seems to be Rom Manager is REALLY AWESOME at bricking phones, but not so good for much else.. Rather, I booted into CWM and told it to make a backup. I'm under the impression this made a nandroid backup. If this didn't, please somebody let me know.
Install 2.3.6 Gingerbread via jscott30's thread and installing option D. And for some reason, this is the only step that requires me to use Odin. I'm not really sure why, if anybody wants to clear that up it'd be great!
Use Qksters EFS backup script to ensure that if I somehow mess things up, I can still save my phone! And to run this I just "flash" it like I would a ROM. Which is by selecting the install zip from sdcard option.
Follow Entropy's CM9 guide to go from GB to ICS And this is just because you can't jump from GB to JB? I'm assuming it's something along those lines. Either way, his guide seems straightforward enough. Also during this step, put the ROM, Overclock Kernel, and Gapp files for CM10 on my internal SD card.
Wipe in CWM
Flash the ROM in CWM
Flash Overclock Kernel in CWM because if I'm going through all this trouble to doctor my Android, I may as well give myself the ability to overclock it
Wipe Cache Partition in CWM I don't really know what this does, but I'm assuming it doesn't wipe anything I care about
Advanced/Wipe Dalvick Cache Same as the previous step. I don't know what it does, but I'm following instructions.
Reboot And I'm supposed to understand this first reboot will take like 5-10 minutes and I shouldn't run around my house crying that my phone broke when it takes a long time to reboot.
Wait 15 minutes and reboot a second time
Log into google account And this gets my contacts back
Restore user app data This gets my apps and my 3 starred all angry birds levels back?
CAREFULLY restore some system data that is green
And after that, I get to play around with my brand new shiny OS and enjoy my phone!
I apologize that this is not a very concise accumulation of questions, but there's not really a single guide that goes step by step through this ENTIRE process of going from Froyo to a customized jellybean OS while making sure you don't lose any app data. It's taken me about ~5 hours of reading through a number of topics and my brain is starting to feel fuzzy, so I really just wanted some of the more experienced members of the community to doublecheck my planning.
Thank you guys so much! Everybody in this community is just awesome for dumbing this process down for those of us who do not understanding the inner workings of a computer : ). I'm very appreciative!
You have pretty much the right idea.
There's a few pointer i would suggest. Back up your contacts to google. Save all your photos to your PC.
When you are making the move from 2.2.1 to 4.1.2 or 4.2, I would start it all new. I would not restore anything you had in froyo (2.2.1) to 4.1.2.
With that in mind, put your phone into download mode, flash jscott's gb with bootloaders.
Flash cm9 and then cm10 as instructed on their ops or andros's write up.
Also I noticed you have a step about flashing the OC kernel, but OC has now been integrated into the kernel that comes with the build.
And as qkster stated, avoid restoring data. If there is something essential you do not want to lose you may restore data for that specific app and in case you start having issues, you know what to blame.
Sent from my SGH-I997 using xda app-developers app
qkster said:
You have pretty much the right idea.
There's a few pointer i would suggest. Back up your contacts to google. Save all your photos to your PC.
When you are making the move from 2.2.1 to 4.1.2 or 4.2, I would start it all new. I would not restore anything you had in froyo (2.2.1) to 4.1.2.
With that in mind, put your phone into download mode, flash jscott's gb with bootloaders.
Flash cm9 and then cm10 as instructed on their ops or andros's write up.
Click to expand...
Click to collapse
Luckily, the guide I read on backing up suggested both of those things, so I've done those.
I'm underway! I managed to successfully install the option D from jscott, but I'm a little confused on how to flash the bootloaders. Do I need to put my phone back into download mode to use Odin again? I tried that, and Odin doesn't seem to want to recognize my phone.
And sadly, I can't skip out on the bootloaders as I'm sure you guessed. Upon trying to go to CM9 I failed miserably due to rainbows. I actually used your guide to get back to well, stock UCLB3, and from there I've been trying to get the bootloaders on by putting my phone in download mode.
With no luck, sadly. Odin just doesn't want to show my phone as connected. Kinda stuck at the moment!
EDIT: I re-read the guide of yours I followed and saw that all I had to do was flash the thing a second time with the install bootloaders box checked. Unfortunately, I've done that, and I can clearly read the words "Uploading SBL...SBL upload failed!" on my screen.
Doesn't take much of a genius to figure out that the BL likely stands for bootloaders, so now I'm slightly freaking out. Heimdall One-click is currently trying to end the session. I'm of course going to let it go as long as I can hoping that it ends things nicely as I'm terrified to try turning anything off at this point. Hopefully I didn't just permanently destroy my phone =\
Andros: Oh thank you for saving me from the OC mishap. I suppose there's some good in me not having gotten that far yet due to problems!
EDIT 2: I can see the light at the end of the tunnel! I swapped my USB ports around a bit and kept trying with your Heimdall One-click stuff and finally got the bootloaders in! Once that went through the rest was easy as pie : ) Everything's going smooth, I'm currently installing JB Gapp stuff, then I'm going to follow the rest of my ROM guide and I don't forsee any issues. Thank you guys again, both of your guides and your responses were very helpful!
I want to thank YOU arguro. If everybody had the patience and intelligence to so thoroughly research what they wanted to do there would be so many less help I bricked my phone threads and a whole lot less irritated developers.
You went into the process with the right amount desire / fear. Glad you made it and welcome to jellybean!
Sent from my SGH-I997 using xda app-developers app
Hello! I apologize in advance for my lack of knowledge.
First of all here is my phone info
Rooted RAZR maxx hd with unlocked bootloader (XT926)
My main objective is to flash custom ROMs and see if any are better and faster than stock.
My problem is I have no idea what I'm doing. I can't seem to find any threads that are simple enough for me to understand what I need to do and in what order I need to do those things.
Supposedly I need to back up my phone which seems to be the same thing as having a recovery???
If there is a thread that simplifies backing up and using a custom recovery please post a link.
I don't understand how to back up my phone, or if I use my computer or phone to do said back up.
I don't understand how to use the app ROM manager, my phone isn't listed on it when I try to download clockworkmod. So I downloaded a file cwm.img and I don't know what the heck to do with it?
I think I have adb on my computer?
I'm so confused and there's too much information and it makes no sense to me. Can someone please help me or post links to SIMPLE walk throughs of what I need to do and tell me what order I'm supposed to do them in?
I'm sorry if you think I haven't searched because I've been searching for a long time over a few days and all I've found is information that is too complex for me.
I appreciate any help! I'm new and I don't want to hurt my phone.
boost4life17 said:
Hello! I apologize in advance for my lack of knowledge.
Click to expand...
Click to collapse
First of all here is my phone info
Rooted RAZR maxx hd with unlocked bootloader (XT926)
Mine is a Razr HD (XT925) But it's mainly the same except roms and some tools (and probably some other things I don't know...)
My main objective is to flash custom ROMs and see if any are better and faster than stock.
Which is the idea I had a week ago
My problem is I have no idea what I'm doing.
I was exactly in the same position since this is my first smartphone ever ^^
I can't seem to find any threads that are simple enough for me to understand what I need to do and in what order I need to do those things.
Well I had to search a while cause I first of all wanted to backup the most I could before doing anything.
Supposedly I need to back up my phone which seems to be the same thing as having a recovery???
This is a good thinking But there are limitations on what you can do without making the first thing which is rooting your phone "and then unlocking it".
If there is a thread that simplifies backing up and using a custom recovery please post a link.
I don't understand how to back up my phone, or if I use my computer or phone to do said back up.
The first thing I could do, was to backup the Apps/Contacts/etc... by using some apps like : MyBackup
The thing is : these applications are limited until you are rooted, because you wont be able to save apps data like your game scores or whatever
The second way to backup, is to make an entire backup of your system and data, which can only be made after unlocking the bootloader (by installing a custom recovery).
Be careful, unlocking your bootloader will ENTIRELY WIPE the data you have so make backups BEFORE.
I don't understand how to use the app ROM manager, my phone isn't listed on it when I try to download clockworkmod. So I downloaded a file cwm.img and I don't know what the heck to do with it?
Not sure about it because I never got that app before unlocking my bootloader.
I think I have adb on my computer?
To get adb on your computer, you need Android-SDK.
I'm so confused and there's too much information and it makes no sense to me. Can someone please help me or post links to SIMPLE walk throughs of what I need to do and tell me what order I'm supposed to do them in?
If you need more infos, dont hesitate to ask me on your post Ill subscribe to it in case of
I'm sorry if you think I haven't searched because I've been searching for a long time over a few days and all I've found is information that is too complex for me.
I can understand, personnaly im working in IT and I understand how this can be a pain when you have no knowledge at all on that subject :/
I appreciate any help! I'm new and I don't want to hurt my phone.
Once again, good thinking, but even thought, going where you are going is very risked.
And I can tell...because I nearly bricked my phone...as you can see here : http://forum.xda-developers.com/showthread.php?t=2631547
boost4life17 said:
Hello! I apologize in advance for my lack of knowledge.
First of all here is my phone info
Rooted RAZR maxx hd with unlocked bootloader (XT926)
My main objective is to flash custom ROMs and see if any are better and faster than stock.
My problem is I have no idea what I'm doing. I can't seem to find any threads that are simple enough for me to understand what I need to do and in what order I need to do those things.
Supposedly I need to back up my phone which seems to be the same thing as having a recovery???
If there is a thread that simplifies backing up and using a custom recovery please post a link.
I don't understand how to back up my phone, or if I use my computer or phone to do said back up.
I don't understand how to use the app ROM manager, my phone isn't listed on it when I try to download clockworkmod. So I downloaded a file cwm.img and I don't know what the heck to do with it?
I think I have adb on my computer?
I'm so confused and there's too much information and it makes no sense to me. Can someone please help me or post links to SIMPLE walk throughs of what I need to do and tell me what order I'm supposed to do them in?
I'm sorry if you think I haven't searched because I've been searching for a long time over a few days and all I've found is information that is too complex for me.
I appreciate any help! I'm new and I don't want to hurt my phone.
Click to expand...
Click to collapse
Start
Use Recovery Tools from play to flash your fav img.
TWRP check my Problems post in HD gen. Pocket proof, easy
Not pocket proof:
CWMR be careful of the double touch conformation!-you can use the keys til you are versed w/ the input flukes that inspired Philz recovery. Otherwise solid & simple.
I use Philz which may support everything in Rom Manager soon.
RM works w/ Photon Q recovery works on all the msm8960 phones, xt907, 925, 926, mb886. keys only.
All recoveries
Just because you can format it, it still may not be supported in the backup or even the xml restore (/persist)
edit
Get a SANDISK 64 GB CARD, FORMAT FROM RECOVERY to default format-fat32. Then when in doubt BACKUP.
All for now
bye
No offense intended, but if it's too difficult for you, than you probably shouldn't touch the phone until you understand everything. Before you start modding, you need to know how to recover it so we don't have another brick. Once you start to understand the minor things, it will be like a light switch and the more complex things will start to make sense.
Hybris95 said:
First of all ..
Click to expand...
Click to collapse
Be careful, unlocking your bootloader will ENTIRELY WIPE the data you have so make backups
>>>>
This only happens on a moto factory UL.
Not the one for the xt907, 926 & mb886.
I do believe a 925 can save themselves the bother of the factory path if they do not mind it being not reversible. Yet both are irreversibly noticeable.
aviwdoowks said:
Be careful, unlocking your bootloader will ENTIRELY WIPE the data you have so make backups
>>>>
This only happens on a moto factory UL.
Not the one for the xt907, 926 & mb886.
Click to expand...
Click to collapse
Sorry about that I thought XT926 were close enough from XT925 (which is the only device I own) to have the same unlocking process.
My bad ^^
well if you're already unlocked and rooted, use this
http://wiki.cyanogenmod.org/w/Install_CM_for_xt925
follow the instructions, go to the development forum, download TWRP, CWM whichever floats your boat, and just use adb and fastboot.
id reccomend a backup, nandroid, titianium, etc.
djvita said:
well if you're already unlocked and rooted, use this
http://wiki.cyanogenmod.org/w/Install_CM_for_xt925
follow the instructions, go to the development forum, download TWRP, CWM whichever floats your boat, and just use adb and fastboot.
id reccomend a backup, nandroid, titianium, etc.
Click to expand...
Click to collapse
Is post # 5 true for you & your 925 unlock?
Thanks
RikRong said:
No offense intended, but if it's too difficult for you, than you probably shouldn't touch the phone until you understand everything. Before you start modding, you need to know how to recover it so we don't have another brick. Once you start to understand the minor things, it will be like a light switch and the more complex things will start to make sense.
Click to expand...
Click to collapse
This is an excellent point. When I first got into this a couple of years ago, I soft bricked my Bionic. I was able to recover it, but I could have avoided the problem if I had read a little more first. Now I read, read, read before trying something new. I found YouTube videos very helpful when I was a noob. Rootjunky is one resource, online and on YouTube. rootjunky.com
Sent from my Nexus 7 using xda app-developers app
aviwdoowks said:
Is post # 5 true for you & your 925 unlock?
Thanks
Click to expand...
Click to collapse
yes i supposedly backed up with cwm, but the last time i got in that option, it did not find that backup.
at least there is a firmware superthread, but my cwm is for 4.4 only, so id have to flash another cwm to go back to stock jb
i find a titanium backup to be better, just backup my sms/calls, wifi keys, and user apps...
RikRong said:
No offense intended, but if it's too difficult for you, than you probably shouldn't touch the phone until you understand everything. Before you start modding, you need to know how to recover it so we don't have another brick. Once you start to understand the minor things, it will be like a light switch and the more complex things will start to make sense.
Click to expand...
Click to collapse
No offense taken! I appreciate the constructive criticism. That is why I posted this question. I am reading all I can and I won't be attempting anything more until I understand the concepts. I just didn't know where to go for a more simple explanation of these concepts since apparently I'm not as intelligent as 90% of you guys on this forum!
I have already rooted and unlocked my phone so that's a good start haha. I will now follow the advice given in this thread and hopefully learn enough to understand these more complex concepts!
I appreciate everyone's information and responses!
Thanks ya'll
Jess
Good to hear you've placed these flammers where they have to be ^^
Anyway Nice job on what is done, the hardest and risky is still to come :/
Envoyé de mon XT925 en utilisant Tapatalk
its easy, the scripts i used are noob friendly, most important part is to backup your info!
djvita said:
yes i supposedly backed up with cwm, but the last time i got in that option, it did not find that backup.
at least there is a firmware superthread, but my cwm is for 4.4 only, so id have to flash another cwm to go back to stock jb
i find a titanium backup to be better, just backup my sms/calls, wifi keys, and user apps...
Click to expand...
Click to collapse
???
Cwm=Cwmr?
Recovery is made for phone not any particular rom.
I'm glad you didn't take offense. Just keep learning, you are off to a good start.
Sent from my Droid RAZR MAXX HD using xda app-developers app