Database Info

[Q] big problem with sidekick

bought sidekick sght839 from friend and it worked fine b4 doing reset. now, when it starts, the tutorial comes up on home screen and can`t press arrow to proceed to next page. firmware 2.2.1-kernal 2.6.32.9-build froyo uvkj2. the wireless works and connects to internet fine. can`t use phone as 456 keys dont work and worked b4. can change settings OK. have rooted it. still doesnt want to work as b4. am new here so if someone could let me know if they have any ideas, I would appreciate it. am also new to android phones. I cant find heimdall file to download. Know how to set phone to download and use Odin but cant find proper files online.

Use the search bar on XDA to search for the kj2 stock Odin files, follow the directions given closely, download them, make sure you have the correct drivers so that Odin recognizes your phone, then boot into download mode using the method found in the forums, just do a quick search for download mode. You should have everything operational after download from Odin is finished, hope this helps
Sent from my SGH-T839 using XDA App

trouble installing odin
I have tried numerous times to install Odin but all I get is unregistered device...that is as far as it goes. Dont know how to get around that. 456 keys also work then dont work otherwise the phone works fine as far as internet and making calls goes. Crazy device!

Try this:
http://forum.xda-developers.com/showthread.php?t=1350060&highlight=heimdall
I soft-bricked my phone and this was the only method that worked.

if you havent reflashed your firmware yet, i have a suggestion. install clockworkmod recovery. there is a thread in the sk4g development section of this website. the title is something like cwm for the sk4g. enjoy! so look for that and follow the instructions in the first post of that thread. make sure you grab the update.zip file from that thread and do not flash cwm through rom manager. trust me on this. after you have followed the instructions in that thread, boot into cwm (boot into stock recovery and select reinstall packages. you should then boot into cwm recovery), select advanced, and then select fix permissions. when it finishes, it will say done. reboot your device and see if any of the problems have been fixed. i did this and it stopped my phone from randomly rebooting every 15 to 30 minutes. it might fix the problems on your device. if not, i would move to the next step, reflashing the firmware. flash the kj2 build and then learn how to remove bloatware. kj2 is less buggy to start with. still buggy, but less buggy than KD1, KG2, or the other version (KI2?). if you reflash firmware, you will need to re-root in order to remove bloatware. removing bloatware is key for optimal performance with the stock firmware. you can also flash a custom rom if you wish. most of the custom roms on this site have minimal bloatware, so if you wish to go that route, bloatware shouldnt be much of an issue. i personally am on the stock firmware and dont suggest flashing roms for someone so new to android. but if you feel confident enough, thats your decision. i also suggest booting into cwm and running fix permissions after removing bloatware. i theorize that removing system apps causes permissions errors similar to registry errors in windows.

some success with sk4g
don`t know how or why but I got frustrated with the phone and threw it in the trash on top of coffee grounds...changed my mind and pulled it out and cleaned it and charged it and...voila...it worked. banged it against the sink a couple times. weird! so, now I am trying to install custom rom and keep running into everification error when I try to flash. 456 buttons still dont work and cant take a video with it but it will probably work better if I can find a work-around for these errors I get. I am on a mission now and I cant give up. Hope someone can help me. I think there may be hope for this thing. Thanks for whatever help I can get.

i told you, install clockworkmod and fix permissions. it will probably fix the problems you are having. if you choose not to listen, thats. your choice. but my advice will probably help you without having to through the pain in the rear of reflashing the firmware. reflashing the firmware itself isnt really that difficult, but once you do it, your back to square one with your device. starting from scratch is the frustrating part. i bricked my phone and had to reflash, and it took me a couple weeks to get the phone where i needed it again. im staying on the stock firmware for this reason.

how does one fix permissions
OK OK dont yell. How do I fix permissions? Newbie on board here so I need a little more help than the rest. I dont necessarily want to do the rom thing myself. Thanks.

copy and paste this into your browser: forum.xda-developers.com/showthread.php?t=1124453 and follow the instructions in the first post. after you have followed those instructions, boot into recovery mode. the stock recovery will apear. scroll down and select reinstall packages. the clockworkmod recovery should boot up. the text in the screen will be orange. scroll down and select advanced. scroll down again and select fix permissions. when it finishes, it will say done. reboot your device and see if you have any of the issues you were having. i am not guaranteeing this will fix the issues, but i think it might. if it doesnt, my next suggestion will be reflashing the stock firmware. but try this and post back when finished and let me know if it works.

sk4g problem
didnt work. did exactly what you said and no go. any other suggestions. it works so well for some things like wifi and calling except 456 buttons on and off. it is funky indeed. thanks for the help also, cant take video or manage photo or use front camera as the left side button to choose options doesnt work either. seems like something is up with the rom. cant install anything from samsung or tmobile as it is an unregistered phone.

were you able to boot into clockworkmod recovery?

boot up
yes I did.

then you need to reflash your firmware. you need odin, you need the samsung vibrant drivers, and you need the firmware files. do a search on odin in the dev thread for this device and you should be able to find everything you need, including instructions.

Have tried that too
have the drivers, have odin and have tried that too. that didnt work as the phone is unregistered and not recognized. it is used and I cant register it.

on your phone, go to settings>about phone and scroll down to where it says baseband version. the last 3 characters under that will say either kd1, kg2, or kj2. if its not kj2, then i have a suggestion for you. but post back and lmk.

phone setting
it is kj2. now what? this is all confusing as it has been updated I believe by previous owner. thanks for your time. i am going to try the odin method again. i first did it on a 64bit puter with windows 7 so i can try it on my 32bit machine. have read that sometimes odin doesnt work well on 64bit. am willing to try anything. will let you know. thanks again. cant get the stock rom download anywhere. will just try flashing custom rom.

you cant odin a custom rom unless the dev makes an odin file, which they usually dont. you have to flash through clockworkmod. you can head over to the dev section and pick from many roms that are listed. follow the developers instructions for flashing very carefully or you will brick your device.

Thanks for advice.
I know I can`t odin a custom rom. I can`t seem to odin anything on this machine. I have cwm and have tried using it to flash a rom but I keep getting everification and such error msgs. Gonna let it sit for awhile and think about this. I have the update.zip file on sdcard but can`t seem to get that to install no matter what I do. Very puzzling deal. Thanks anyway for your help.

do you have android sdk installed on your computer? google it and install it, then try odin again.

got sdk
sdk installed and will try odin again...seems a little more complicated than the last time I tried...will google a bit more on this. Thanks.

[DEV & CWM Recovery for Pantech Crossover]

Forgive me if I'm posting in the wrong section. Forgive me if I'm not allowed to post here yet. Just forgive me in general. I don't want to be banned or anything like that. I'm Extremely interested in android development.
I made a working port of ClockworkMod Recovery v5.0.2.8 for the Pantech Crossover. I wanted to do this before I started tinkering around with porting cm7.2. So that I would have a way to backup, restore, and flash new roms, etc... Or else when I make a noob mistake like yesterday and have a non booting phone resulting in having to flash my old boot.img with fastboot...anyways..
DANGER: DRAGONS AHEAD
FLASH AT YOUR OWN RISK
YOU HAVE BEEN WARNED
The method I used to flash the recovery was:
1)adb push recovery.img /sdcard/recovery.img
2)flash_image recovery /sdcard/recovery.img
3)repeat step 2 (for some reason it gave me a read error out of memory the first time)
Here's the link to the custom recovery:
http :// dl. dropbox .com /u/20070520/ recovery.img
I know I'm not supposed to post links yet. Remove spaces
I just hope that there are others with the Pantech Crossover that are interested in this and the possible future development of custom roms.
Also if anyone knows if there is a good way to get ahold of koush let me know, so I can give him what he needs to hopefully add this to Rom Manager. I couldn't message him on github because he doesn't have an email set up with it

And while I'm at it. Here's the method for rooting your crossover. I'm not going to provide the files since they can easily be found with a google search.
1: Find a copy of gingerbreak.apk and copy it to your sd card
2: Enable usb debugging and allow installation of non market apps
3: Install gingerbreak
4: Root device with Gingerbreak
5: You can uninstall Gingerbreak when its completed.
Sent from my rooted PantechP8000 using XDA

Thanks so much for this! I have a friend with a crossover and is always looking for my help with making it work better. I realize this is a newer thread, I was wondering how things were coming along with CM? Anything I can do to help perhaps?

crap i need a rom to fix my crossover the buttons are no longer mapped after a hard reset. please help.

Slow
Well, it's been slow goings so far. I downloaded the open source files for the p8000 and it looks like they just built the original rom from a generic build. I've been trying to get a more customized build setup but I need to do some more reading so far. One of the problems is that instead of an akmd(2) binary for orientation and compass it uses three separate modules. Plus the hci_attach is a bit different as well and so is the bluetooth. So that significantly hampers the ease of even a basic port.
As far as the gentleman with the question about a rom to fix your device. The best I can do right now is to upload a clockwork mod backup after I do a factory reset. I don't get much time to work on this between my wife and daughter.
Also, do you have adb access to your device? Surely it wouldn't be too difficult to adb push the correct keymapping files back to your phone.
You say a hard reset messed up your mappings? What problems were you experiencing prior to the reset?

Crossover
Hello,
I just wanted to let you know that there are people watching your thread. I am very interested in this as my parents have Crossovers and have recently rooted and unlocked them (well, I did) and set them up to work on Net10.
The only issue I've noted is that there are some failures, like the Market refusing to install apps no matter what is done. I'm going to install your ClockworkMod in hopes that later it might be useful.
I realize there isn't a large development scene for the P8k yet, and maybe there won't be but it's always a great hope that those with the capabilities might take pity. I was almost thinking that it might be my foray into actually looking deeper at the code than the small bit I've done.
Kind Regards,
Kaylus

Yup
kaylus said:
Hello,
I just wanted to let you know that there are people watching your thread. I am very interested in this as my parents have Crossovers and have recently rooted and unlocked them (well, I did) and set them up to work on Net10.
The only issue I've noted is that there are some failures, like the Market refusing to install apps no matter what is done. I'm going to install your ClockworkMod in hopes that later it might be useful.
I realize there isn't a large development scene for the P8k yet, and maybe there won't be but it's always a great hope that those with the capabilities might take pity. I was almost thinking that it might be my foray into actually looking deeper at the code than the small bit I've done.
Kind Regards,
Kaylus
Click to expand...
Click to collapse
I haven't had any problems with the market refusing to install apps but I do sometimes run across the no connection error with the market when on wifi. Although I did notice this before I rooted my crossover. Sometimes disabling and re-enabling the wifi helps. I really do think it is a bug somewhere in the original rom.
As far as the custom recovery image. Everything seems to be working pretty good. I use it mainly for restoring previous backups. I would say I've restored my backup at least a dozen times. Occasionally it states there was an error restoring .android secure but I have yet to track that down. I need to double check the recovery.fstab to make sure I have everything set right for the mount points.

stevotdo said:
I haven't had any problems with the market refusing to install apps but I do sometimes run across the no connection error with the market when on wifi. Although I did notice this before I rooted my crossover. Sometimes disabling and re-enabling the wifi helps. I really do think it is a bug somewhere in the original rom.
Click to expand...
Click to collapse
I'm actually completely stuck at this point. I'm rooted, unlocked, different carrier, APN set correctly. I can access data and voice -- but it just hangs at "Downloading..." on the market. If I factory reset it works initially but after reboot it fails. I'm not quite sure why this occurs and if it is just this phone or a side-effect of using it on a different carrier.
Strangely Wi-fi doesn't resolve it.
As far as the custom recovery image. Everything seems to be working pretty good. I use it mainly for restoring previous backups. I would say I've restored my backup at least a dozen times. Occasionally it states there was an error restoring .android secure but I have yet to track that down. I need to double check the recovery.fstab to make sure I have everything set right for the mount points.
Click to expand...
Click to collapse
I'll give your recovery a run and let you know, if you manage CM7 let me know I know it's a big undertaking. Thanks for the response.

Market Error
As far as the Android Market hanging. I see a few references to it being cause by the .android_secure folder becoming corrupted on the sd card.
One temporary fix suggest moving all the installed apk's back to the phone memory and deleting the .android_secure folder. Then rebooting and moving those apps back to the sd card.
That seems like some wasted time if it doesn't happen to work. I would just turn the phone off, remove the sdcard, and restart (granted any apps that were moved to the sdcard wont work until it is reinserted.) Then I would try to download and install an app. If that works then shutdown, insert sd, and reboot.
I'm really curious if the problems with .android_secure that you and i are having aren't just more bugs in the original rom.

Just as a poster above me said, I am watching this thread and really appreciate everything you are doing. Thanks again.

Well I appreciate the support. I just hope to be able to offer a rom sometime soon. Unfortunately I won't have anymore free time till Tuesday
crimson12 said:
Just as a poster above me said, I am watching this thread and really appreciate everything you are doing. Thanks again.
Click to expand...
Click to collapse

Not an issue, life first, then android development.
Sent from my Galaxy Nexus using Tapatalk

Pantech Crossover Update
Ahhhhh check out the pantech support page for the crossover. They finally have the Gingerbread update.
http:// pantechusa. com/xupgrade/ remove spaces.
Which is great because I soft bricked my phone (don't ask) and this was going to be the only way to fix it.

stevotdo said:
Ahhhhh check out the pantech support page for the crossover. They finally have the Gingerbread update.
http:// pantechusa. com/xupgrade/ remove spaces.
Which is great because I soft bricked my phone (don't ask) and this was going to be the only way to fix it.
Click to expand...
Click to collapse
Oh hell yes finally. Thanks for the notice!
Sent from my Galaxy Nexus using Tapatalk

Mildly related, but have you figured out how to root the gingerbread ROM? I've tried ginger break to no avail.
Sent from my Galaxy Nexus using Tapatalk 2

anyone have a stock image of the 2.2 for android my phone came preupgraded to 2.3.6 and i would like to have it rooted over being on gingerbread since a root method hasnt been found yet for the new firmware

Bricked?
I tried to use the pantech provided gingerbread update this morning. It got about an eighth of the way through and failed. It instructed me to reboot while holding volume up and home and power. That put it in software updating mode. I tried the upgrade 3 more times, it failed at the same point each time. Now my phone is stuck in S/W Updating mode and I can't seem to get it out. I've tried pressing volume up and down for 10 seconds, and pressing volume down and home while powering on, nothing seems to make a difference. Any thoughts about how to at least get me back to froyo?

formattdd said:
I tried to use the pantech provided gingerbread update this morning. It got about an eighth of the way through and failed. It instructed me to reboot while holding volume up and home and power. That put it in software updating mode. I tried the upgrade 3 more times, it failed at the same point each time. Now my phone is stuck in S/W Updating mode and I can't seem to get it out. I've tried pressing volume up and down for 10 seconds, and pressing volume down and home while powering on, nothing seems to make a difference. Any thoughts about how to at least get me back to froyo?
Click to expand...
Click to collapse
Nevermind, bad usb cable.

formattdd said:
Nevermind, bad usb cable.
Click to expand...
Click to collapse
Glad you got it working!
Sent from my Galaxy Nexus using Tapatalk 2

Yeah now I'm having the same regrets as above. No root.
Sent from my PantechP8000 using XDA

Have an SGH-T959W on Wind? Don't worry, it is exactly the same as the SGH-T959V!

Hello Canadian users with SGH-T959W!
I spent some time the last few days comparing the kernel source for SGH-T959W and SGH-T959V, and found they are exactly the same (plus a few fixes for us on SGH-T959V from the SGH-T959W source!)!
This is good for you, because we have unofficial cm7, cm9, aokp, et alii... ports for the SGH-T959V.
Maybe a forum admin could update the Samsung Galaxy S 4G forum to also say: SGH-T959V & SGH-T959W
Technically, the only real difference is that the stock roms for the SGH-T959W will have different pre-installed software. The hardware of the SGH-T959W is the same as the SGH-T959V.
Enjoy!
Read this stuff to continue:
http://forum.xda-developers.com/showthread.php?p=28566711#post28566711

BTW, if anyone has an odin or kies tarball, please PM me!
This way I can verify if the bootloaders are different or not, and if they are different, I can make you guys custom Heimdall OneClick and Odin packages.

bhundven said:
I spent some time the last few days comparing the kernel source for SGH-T959W and SGH-T959V, and found they are exactly the same (plus a few fixes for us on SGH-T959V from the SGH-T959W source!)!
Click to expand...
Click to collapse
Sorry to bump this thread, but out of curiosity, what were the fixes you were able to implement after seeing the kernel source for the 959W?
If it's something you'd rather not explain and will just be rolling out in future kernels, no big deal; just curious.
Thanks.

fingolfin14 said:
Sorry to bump this thread, but out of curiosity, what were the fixes you were able to implement after seeing the kernel source for the 959W?
If it's something you'd rather not explain and will just be rolling out in future kernels, no big deal; just curious.
Thanks.
Click to expand...
Click to collapse
The hardware is exactly the same. There is still a problem with the OTA Assert, meaning, how the rom knows if it is able to install on the phone or not during install from cwm. Also how it identifies itself to the play store.
I'm fixing this in the next cm9 unofficial release (coming soon, eta... a few hours, maybe).
The only real difference between SGH-T959V and SGH-T959W is the pre-installed/bundled software on the phone.
Everything else is one-to-one.
I'm still paranoid about bootloaders. So I'm still waiting for someone to post Kies or leaked tar.md5 for the SGH-T959W so that I can diff the bootloaders. If they are different, I will create new Heimdall OneClicks for SGH-T959W so that it is simple for you to go back to stock. See my current Heimdall OneClick thread to get an idea of what I mean.
On the other hand, we have some issues with our SGH-T959V bootloaders, and I have Unbrickable Mod on my phone. So, if the bootloaders are different, I would like to try flashing the SGH-T959W bootloaders to see if they work any better.
Also, there are a few fixes in the SGH-T959W kernel source that I will be incorporating into the current unofficial CM7 and CM9 ports I work on. Not having these fixes shouldn't have any negative impact on SGH-T959W.
I hope this info is informative. If not, ask more!

I have a SGH-T959W which seemed to have a bad flash already (from before.. and I am trying to revive it) on it (seems stuck on the cwm screen, and the system partition doesn't seem to have all the data that it needs to). Is there any way of getting the original ROM for this phone? Even if I install a cm build for the T959V, I don't get errors but its stuck in a cwm loop (keeps coming back to cwm).
When I try any of the one-clicks for the T959V, it succeeds on the kernel upload but always fails on the modem upload.
Where would you look for the Kies tar for this phone? Any possible way of getting the original ROM from a brand new phone? (any instructions for these would be great)
bhundven said:
The hardware is exactly the same. There is still a problem with the OTA Assert, meaning, how the rom knows if it is able to install on the phone or not during install from cwm. Also how it identifies itself to the play store.
I'm fixing this in the next cm9 unofficial release (coming soon, eta... a few hours, maybe).
The only real difference between SGH-T959V and SGH-T959W is the pre-installed/bundled software on the phone.
Everything else is one-to-one.
I'm still paranoid about bootloaders. So I'm still waiting for someone to post Kies or leaked tar.md5 for the SGH-T959W so that I can diff the bootloaders. If they are different, I will create new Heimdall OneClicks for SGH-T959W so that it is simple for you to go back to stock. See my current Heimdall OneClick thread to get an idea of what I mean.
On the other hand, we have some issues with our SGH-T959V bootloaders, and I have Unbrickable Mod on my phone. So, if the bootloaders are different, I would like to try flashing the SGH-T959W bootloaders to see if they work any better.
Also, there are a few fixes in the SGH-T959W kernel source that I will be incorporating into the current unofficial CM7 and CM9 ports I work on. Not having these fixes shouldn't have any negative impact on SGH-T959W.
I hope this info is informative. If not, ask more!
Click to expand...
Click to collapse

phaedrus81 said:
I have a SGH-T959W which seemed to have a bad flash already (from before.. and I am trying to revive it) on it (seems stuck on the cwm screen, and the system partition doesn't seem to have all the data that it needs to). Is there any way of getting the original ROM for this phone? Even if I install a cm build for the T959V, I don't get errors but its stuck in a cwm loop (keeps coming back to cwm).
When I try any of the one-clicks for the T959V, it succeeds on the kernel upload but always fails on the modem upload.
Click to expand...
Click to collapse
This is annoying, sorry you are going through this. It sounds like something dorked your param.lfs.
I've had this happen to me, and it always appends 'bootmode=2' to the kernel command line. Only way to fix it is to flash a new param.lfs from the stock image...
phaedrus81 said:
Where would you look for the Kies tar for this phone? Any possible way of getting the original ROM from a brand new phone? (any instructions for these would be great)
Click to expand...
Click to collapse
...which brings me to this part. Someone told me that they have this image, but when I asked them to post it somewhere, I got no response.
Bug Wind and Samsung for a kies mini or a stock image that you can flash to the phone. Samsung is probably not going to be as helpful as Wind, so I'd try bugging the crap out of Wind.
Hopefully someone will get me the tar.md5 soon, and we can get you guys a one-click with bootloaders (which includes the param.lfs).
If you feel bold/brave, you can try flashing the bootloaders from my Stock oneclick in my signature.
Since it should be the same hardware it should work the same. Granted after flashing your phone will now be a SGH-T959V and not an SGH-T959W.
I hold no guarantee that it will work, and/or that it won't try to shoot you at your favorite new 3d film. <.< ... >.>

Thanks for the info about what might be causing the cwm loop issue
I think I will the one-click with bootloaders a try (will update this thread with the results). At this point I think I have exhausted all other options to revive the device.
bhundven said:
This is annoying, sorry you are going through this. It sounds like something dorked your param.lfs.
I've had this happen to me, and it always appends 'bootmode=2' to the kernel command line. Only way to fix it is to flash a new param.lfs from the stock image...
...which brings me to this part. Someone told me that they have this image, but when I asked them to post it somewhere, I got no response.
Bug Wind and Samsung for a kies mini or a stock image that you can flash to the phone. Samsung is probably not going to be as helpful as Wind, so I'd try bugging the crap out of Wind.
Hopefully someone will get me the tar.md5 soon, and we can get you guys a one-click with bootloaders (which includes the param.lfs).
If you feel bold/brave, you can try flashing the bootloaders from my Stock oneclick in my signature.
Since it should be the same hardware it should work the same. Granted after flashing your phone will now be a SGH-T959V and not an SGH-T959W.
I hold no guarantee that it will work, and/or that it won't try to shoot you at your favorite new 3d film. <.< ... >.>
Click to expand...
Click to collapse

phaedrus81 said:
Thanks for the info about what might be causing the cwm loop issue
I think I will the one-click with bootloaders a try (will update this thread with the results). At this point I think I have exhausted all other options to revive the device.
Click to expand...
Click to collapse
Also, just to make sure you have tried different cables and computers.
Not being able to flash the modem sounds like a cable/computer issue.
If you have that issue while flashing bootloaders, you could hard-brick your phone.
The first time you flash with the oneclick, it will not flash bootloaders. The second time, the option to flash bootloaders opens up, but you still have to enable it.
Don't forget to read all the documentation in my thread before doing anything.
If you have any questions, ask before you do.

The Root Doesn't work. I follow the step and it damaged my phone! T959W
bhundven said:
Hello Canadian users with SGH-T959W!
I spent some time the last few days comparing the kernel source for SGH-T959W and SGH-T959V, and found they are exactly the same (plus a few fixes for us on SGH-T959V from the SGH-T959W source!)!
This is good for you, because we have unofficial cm7, cm9, aokp, et alii... ports for the SGH-T959V.
Maybe a forum admin could update the Samsung Galaxy S 4G forum to also say: SGH-T959V & SGH-T959W
Technically, the only real difference is that the stock roms for the SGH-T959W will have different pre-installed software. The hardware of the SGH-T959W is the same as the SGH-T959V.
Enjoy!
Read this stuff to continue:
http://forum.xda-developers.com/showthread.php?p=28566711#post28566711
Click to expand...
Click to collapse
I try your root process for my T959W now My phone Can't turn on . It turn on and off with the glaxy S 4G logo and T-Mobile . HELP PLS i tried to unroot It does work and It . PLS HELPPPP!!!!!

GMK63 said:
I try your root process for my T959W now My phone Can't turn on . It turn on and off with the glaxy S 4G logo and T-Mobile . HELP PLS i tried to unroot It does work and It . PLS HELPPPP!!!!!
Click to expand...
Click to collapse
Please be more specific as to which 'process' you followed and what you did.
Sorry I've been delayed in responding!
Again, if you can be more specific as to exactly what you did, I will be better prepared to help you.

It does look like it could be a cable/computer issue. I tried different cables and some of them didn't get as far as the modem (failed the kernel upload as well). Haven't got a cable which succeeds in the modem flash yet.
All of the driver stuff on windows makes me nervous though. Is there any way to flash this on linux. Does the one-click package work with fastboot or can fastboot be used to flash the individual pieces?
bhundven said:
Also, just to make sure you have tried different cables and computers.
Not being able to flash the modem sounds like a cable/computer issue.
If you have that issue while flashing bootloaders, you could hard-brick your phone.
The first time you flash with the oneclick, it will not flash bootloaders. The second time, the option to flash bootloaders opens up, but you still have to enable it.
Don't forget to read all the documentation in my thread before doing anything.
If you have any questions, ask before you do.
Click to expand...
Click to collapse

phaedrus81 said:
It does look like it could be a cable/computer issue. I tried different cables and some of them didn't get as far as the modem (failed the kernel upload as well). Haven't got a cable which succeeds in the modem flash yet.
All of the driver stuff on windows makes me nervous though. Is there any way to flash this on linux. Does the one-click package work with fastboot or can fastboot be used to flash the individual pieces?
Click to expand...
Click to collapse
These phones do not have fastboot, but they have download mode.
Yes, you can do this from: Windows, Linux, or Mac OS X
If you still have problems with multiple cables, I highly recommend trying a different computer. I've had this problem myself before. It drove me nuts until I got a friends laptop and everything worked perfectly. My laptop's usb ports had gone bad for some unexplainable reason.
Check out the wiki pages we have written:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/SGH-T959V

Steps I followed
managed to get my Wind SGH-T959W rooted and up and running with a unofficial CM9 build, but it took a bit of work.
Firstly, I tried just about every one-click solution out there, to no avail. It's possible SOC 1.7 with rattlethecage works, but I didn't have the patience to find out whether I simply had to wait a bit longer.
I followed this guide(whilst clenching every clenchable muscle I could consciously control):
http://www.galaxyforums.net/forum/of...ngerbread.html
The gist is, Odin 1.7, stock+voodoo for T959V, plus some update that I'm not qualified to describe. That should get you rooted and if that's all you're looking for, you'll have to suffer through a little T-Mobile branding on startup.
Once you got it all rooted, you'd think it'd be a good idea to toss sgs-ics on there, right? Well, no. After installing the 4G variant, it promptly set off into a boot loop which I'm again, unqualified to diagnose. The obvious solution was to try another team's version of ICS, which I indeed found here:
http://forum.xda-developers.com/show....php?t=1730954
Barring some missing features, it sounds like a good alternative to sgs-ics. Though I had to go through one additional step, which I really, honestly assure you I was under-qualified to execute. When I tried to load Team Acid's CM9 r3 it gave me an assert on the updater-script, since the hardware didn't match up. Easy. Unzip the package, open up META-INF/com/google/android/updater-script, remove the first check. You know it's the same hardware, you don't need some stinkin' script to tell you it won't work.
So all said and done, I now have a Wind Mobile SGH-T959W running ICS 4.0.4 courtesy of bhundven, the Odin folks, Team Acid, and likely a slew of other contributors.
Thanks folks, and enjoy!
PS, if you want that tarball bhundven, send me a PM with some brief instructions, and hopefully you can help my fellow Winders.
.......(---------THAT WHAT I FOLLOWED .
But I did the first part and They said i should get the stuff I store on my SD Card to pull out a file (``12) In CWM, use your volume up/down positions to navigate, scroll down to "Install Zip From SDcard". Select with a click of the power button. Navigate to where you put sms-T959V-KJ6-v0.1.1-rc1-unsigned-update.zip (in the root of your SDcard) and select with the power button. Confirm you want to install.
``)
but it doesn't give me the option to go get it on my SDcard and Now my Phone just turns on and off with the samsung galaxy S logo plus T-mobile exclusive logo . The only possitive thing about all the damage is that I can still put my phone on dowload mode and I just think if someone knows how to get my phone back to it state they will need me to put it on download mode. :crying:
:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
Thank you in advance for your Help, for replying and offering to help.:highfive:
I appriciate it. My phone is Mobillicity carrier just like wind .

GMK63 said:
.......(---------THAT WHAT I FOLLOWED .
But I did the first part and They said i should get the stuff I store on my SD Card to pull out a file (``12) In CWM, use your volume up/down positions to navigate, scroll down to "Install Zip From SDcard". Select with a click of the power button. Navigate to where you put sms-T959V-KJ6-v0.1.1-rc1-unsigned-update.zip (in the root of your SDcard) and select with the power button. Confirm you want to install.
``)
but it doesn't give me the option to go get it on my SDcard and Now my Phone just turns on and off with the samsung galaxy S logo plus T-mobile exclusive logo . The only possitive thing about all the damage is that I can still put my phone on dowload mode and I just think if someone knows how to get my phone back to it state they will need me to put it on download mode. :crying:
:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
Thank you in advance for your Help, for replying and offering to help.:highfive:
I appriciate it. My phone is Mobillicity carrier just like wind .
Click to expand...
Click to collapse
Ok, this is really simple. I've explained it in quite a few threads in the Galaxy S 4G forums in General, Q&A, and the Dev forum. I'm going to explain this, but in a way to be more general. So I'm being verbose in case anyone else with a T959W happens to run across this and has not tried anything yet.
Again, I'm not good with windows at all, and I prefer it that way.
If you're on windows, check out our wiki:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/SGH-T959V
There is tons of help there for setting up heimdall on windows with all the right drivers and such.
Once you have heimdall setup get AntonX's latest cwm zip for his kernel.
This kernel is a BML kernel, and this guide I am giving you right now will help you get cm9 installed which is an MTD kernel. You can find out more about BML vs. MTD here.
Once you have downloaded AntonX's kernel, extract the zImage from it and open up the terminal/cmd prompt and navigate to the directory you extracted the zImage to.
Put your phone into Download Mode and type the following in the command prompt:
Code:
heimdall flash --kernel zImage
The heimdall program will flash this kernel+initramfs to the kernel partition and reboot the phone. Do not unplug the usb cable until you see the "Galaxy S" screen. When you see that screen, unplug the usb cable and remove the battery from the back.
Assuming you downloaded CM9 and put it on your sdcard already, you can get into recovery by holding the vol+ and vol-, then pressing the power button to turn the phone on. When you see the "Galaxy S" screen, let go of the buttons, and you should be in the recovery now.
This is where things get a little tricky. If you have not tried to do anything to your phone yet. This would be a great time to use the "Backup and Recovery" menu on CWM. Do a full backup.
The "assert 7" error that the previous person got was because the cwm install script (the updater-script) checks the already installed /system/build.prop's data against the "to be installed" build.prop to verify this rom can be installed. If it doesn't exist, then it moves forward.
So the first order of business is to wipe the /system partition. Go to "Mounts and Storage" and format the system partition.
Now go back to the main screen and do "Factory Reset/Wipe Data".
Now go "Install zip from sdcard" -> "choose zip from sdcard" -> and use the volume keys to select the zip file.
After the rom is installed, navigate back to the main screen and "Reboot the system now" if it doesn't reboot by itself.
When the phone reboots, because it is going from BML to MTD, it obviously can't just install the files to what would be an MTD partition if the kernel knows nothing about MTD. So it boots into the newly installed MTD kernel and continues the installation, which in the end will also reboot again.
The first boot is very slow. It is building a cache of all the pre-installed system applications. Let it sit for a while. I know it's tempting to go play with your phone right away, but resist if you can.
The next CM9 release will be on a different kernel, and albeit a much better rom.
I will also be adding OTA Asserts for SGH-T959W so that you will not have to wipe /system before installing the rom, but I do that still just for good measure. But this also means that your phone will work properly with the google play store.
If this still does not work, please let me know what went wrong and I will be happy to assist!
-Bryan

Confused
bhundven said:
Ok, this is really simple. I've explained it in quite a few threads in the Galaxy S 4G forums in General, Q&A, and the Dev forum. I'm going to explain this, but in a way to be more general. So I'm being verbose in case anyone else with a T959W happens to run across this and has not tried anything yet.
Again, I'm not good with windows at all, and I prefer it that way.
If you're on windows, check out our wiki:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/SGH-T959V
There is tons of help there for setting up heimdall on windows with all the right drivers and such.
Once you have heimdall setup get AntonX's latest cwm zip for his kernel.
This kernel is a BML kernel, and this guide I am giving you right now will help you get cm9 installed which is an MTD kernel. You can find out more about BML vs. MTD here.
Once you have downloaded AntonX's kernel, extract the zImage from it and open up the terminal/cmd prompt and navigate to the directory you extracted the zImage to.
Put your phone into Download Mode and type the following in the command prompt:
Code:
heimdall flash --kernel zImage
The heimdall program will flash this kernel+initramfs to the kernel partition and reboot the phone. Do not unplug the usb cable until you see the "Galaxy S" screen. When you see that screen, unplug the usb cable and remove the battery from the back.
Assuming you downloaded CM9 and put it on your sdcard already, you can get into recovery by holding the vol+ and vol-, then pressing the power button to turn the phone on. When you see the "Galaxy S" screen, let go of the buttons, and you should be in the recovery now.
This is where things get a little tricky. If you have not tried to do anything to your phone yet. This would be a great time to use the "Backup and Recovery" menu on CWM. Do a full backup.
The "assert 7" error that the previous person got was because the cwm install script (the updater-script) checks the already installed /system/build.prop's data against the "to be installed" build.prop to verify this rom can be installed. If it doesn't exist, then it moves forward.
So the first order of business is to wipe the /system partition. Go to "Mounts and Storage" and format the system partition.
Now go back to the main screen and do "Factory Reset/Wipe Data".
Now go "Install zip from sdcard" -> "choose zip from sdcard" -> and use the volume keys to select the zip file.
After the rom is installed, navigate back to the main screen and "Reboot the system now" if it doesn't reboot by itself.
When the phone reboots, because it is going from BML to MTD, it obviously can't just install the files to what would be an MTD partition if the kernel knows nothing about MTD. So it boots into the newly installed MTD kernel and continues the installation, which in the end will also reboot again.
The first boot is very slow. It is building a cache of all the pre-installed system applications. Let it sit for a while. I know it's tempting to go play with your phone right away, but resist if you can.
The next CM9 release will be on a different kernel, and albeit a much better rom.
I will also be adding OTA Asserts for SGH-T959W so that you will not have to wipe /system before installing the rom, but I do that still just for good measure. But this also means that your phone will work properly with the google play store.
If this still does not work, please let me know what went wrong and I will be happy to assist!
-Bryan
Click to expand...
Click to collapse
I have Window 7 and I went on wiki. I don't know what rom or what I am suppose to download to get heimdall . Plus the steps is not for T959W.

GMK63 said:
I have Window 7 and I went on wiki. I don't know what rom or what I am suppose to download to get heimdall . Plus the steps is not for T959W.
Click to expand...
Click to collapse
:facepalm:
Then send your phone back to Mobillicity. Tell them that you don't know what a smart phone is and did something stupid to it. Go get yourself a nice clamshell phone.
I gave you explicit instructions that work for SGH-T959V and SGH-T959W. As a matter of fact, these instructions work on any "Galaxy S" phone, but you shouldn't flash just any other phone's rom to any other phone.
It just so happens that the SGH-T959V and SGH-T959W are the same exact hardware, just pre-packaged with different software and sold in different regions.
THEY ARE THE SAME PHONE!

With that, I am done with this thread. It was not meant for support! It was merely an announcement.
If you need any more help, please check out the Galaxy S 4G forums.
You can find plenty of directions that will work on either SGH-T959V or SGH-T959W on the wiki.
If you are looking for general information, look at the General forum.
If you need help or are asking a question, look at the Q&A (Questions and Answers) forum.
If you are looking to provide constructive feedback and/or logs to help development of ROMs and Kernels, check out the Developer forum. (Note, do not ask questions in the developer forum).
Don't forget the XDA Forum Rules

n00b to rooting and CWM for P3113

First off love the N00b video at sign up that was hysterical, nice work to whoever made it.
Ok on to what I need to know:
I understand HOW TO root/flash a rom, my issue is kind of different than most peoples. I have scoured the web and this site for the files I need to accomplish this with my GT-P3113 build ending in LG5 however I am confused to hell.
1 place will say that CWM 6.0.1 is not usable on my device, another will say that it works fine and another will say to use TWRP (which might I add looks cool to use). Some will say that I need the expresso_wifi file to root my device, others will say use update.zip, and others will say a totally different file all together.
I know what ROM to get, I understand the steps:
Download drivers
Boot to download
use odin to install CWM
back up everything with CWM (which goes to the MicroSD I am guessing? since I wipe the device in a later step)
wipe the device
wipe the cache
wipe the Dalvik cache
flash the rom
flash the root
is all that correct? (just to make sure I got it right) so my biggest question is, which files do I really use? There is a thread from back in June before the 4.0.4 update OTA came through) saying to use instead of that if you have LG3 or etc.
Help would be greatly appreciated, I am a smart guy, just want to have my facts straight before I make this happen.
PS sorry if this is in the wrong place, figured this was the best place for it.

Please be sure and thank the person who decides to do your homework for you.
:laugh:

FlynnErik said:
First off love the N00b video at sign up that was hysterical, nice work to whoever made it.
Ok on to what I need to know:
I understand HOW TO root/flash a rom, my issue is kind of different than most peoples. I have scoured the web and this site for the files I need to accomplish this with my GT-P3113 build ending in LG5 however I am confused to hell.
1 place will say that CWM 6.0.1 is not usable on my device, another will say that it works fine and another will say to use TWRP (which might I add looks cool to use). Some will say that I need the expresso_wifi file to root my device, others will say use update.zip, and others will say a totally different file all together.
I know what ROM to get, I understand the steps:
Download drivers
Boot to download
use odin to install CWM
back up everything with CWM (which goes to the MicroSD I am guessing? since I wipe the device in a later step)
wipe the device
wipe the cache
wipe the Dalvik cache
flash the rom
flash the root
is all that correct? (just to make sure I got it right) so my biggest question is, which files do I really use? There is a thread from back in June before the 4.0.4 update OTA came through) saying to use instead of that if you have LG3 or etc.
Help would be greatly appreciated, I am a smart guy, just want to have my facts straight before I make this happen.
PS sorry if this is in the wrong place, figured this was the best place for it.
Click to expand...
Click to collapse
From someone relatively new to this as well, this is basically correct. Here are some tips from someone who has recently done it.
Make a backup.
Research the files you intend to flash, make sure they are right for your device
Verify the guide you are using has been tested and known to work.
This may seem elementary, but I didn't follow #3 and it cost me a lot of headache un-bricking my SGT 2.

ryphil said:
From someone relatively new to this as well, this is basically correct. Here are some tips from someone who has recently done it.
Make a backup.
Research the files you intend to flash, make sure they are right for your device
Verify the guide you are using has been tested and known to work.
This may seem elementary, but I didn't follow #3 and it cost me a lot of headache un-bricking my SGT 2.
Click to expand...
Click to collapse
Fully agreed! That's why I came to the experts. I have done my homework but the thing is my homework leads me to several different files from before the ICS update. There has only been 1 thread on 1 forum that has been post ICS update, and no real feedback on it. I think I even found one that uses ADB (I understand that concept, but would prefer not to use it since I don't know Linux well enough).
I would love to know what files to use, which ones to stay away from. As I said I have the concepts, I have the understanding, its the actual files that I want to verify, I can rattle off tons of files from tons of sites, but they may or may not be correct (and may have the same name as a correct one but still be incorrect, ie "update.zip" appears a few times on different threads from different time frames).
There is only post in the teamhacksung CM10 wiki that was last edited 8/12/2012, but that could have been anything that was updated, not the files/links to be used.
So I thank you in advance for your help, and you will certainly get a thank you in the forum for help you are providing, I always give credit where credit is due.
Well here goes nothing, going to reboot (to ensure the Kies drivers are installed and loaded into the system 100%), and try the instructions from this link http://forum.xda-developers.com/showthread.php?t=1788625
It seems to work for most, the only concern I have is that I have a different end to the build than most others do (and I am not sure why?)

Did I screw myself?
I rooted, and have CWM installed.
Is it to late to create a ROM backup of my device for when i go to install CM10 (I need a drink for now, so I might install it tomorrow night lol).
That link I posted in the last post is good to go if anyone else needs a safe bet set of directions.
Seriously though, I didn't do a backup, am I screwed now?
EDIT: I just did a back up and it said no sdcard/.android secure found, skipping of backup of apps
and
no sd-ext found skipping backup of that.
is that normal? Did it backup to my microSD?
Still hope I didn't screw myself by backing it up after rooting.

[q] Help Boot Loop! WIND

I don't know where to post this, I'm coming here all panicked and retarded, so I'm apologizing in advance.
I literally bought my Galaxy S 4G from WIND (Canada) this morning. From what I understood, upgrading the OS was dangerous, all I wanted to do was root... I followed this guide: ht tp ://w ww.gal axyforum s.ne t/forum/off-topic-forum/5053-rooting-tutorial-here-posted-permission-t-mobile-galaxy-s-4g-gingerbread.html (remove spaces)
which I found in a post on these forums. Someone who also was on WIND said it worked fine for them... They were rooted. I foolishly tried it, everything seemed FINE. When I load CWM it can't mount my SD card. I don't know what to do, it's stuck in T-Mobile boot screen loop if I try to exit.. I literally just stopped crying. My dad is going to KILL me if he finds out I ****ed up the new phone I just bought HOURS ago. I don't know what the **** to do, I don't know what's wrong. I need help, please. Anybody know what I can do? I don't care about rooting, I just need my device to work. Please, someone, anyone with any idea, what should I do? I can get back into download mode, and CWM. Is there anything I can do there? There's a recovery guide pinned but it says it's for the T-Mobile version, which I read is the same, can I use that to fix my phone?
This is my first Android device, I've never owned one before. I don't know ****, I shouldn't have tried anything... I just got cocky and made a mistake. I'm usually very good with this kind of stuff. Please someone tell me if there's something I can do to fix this, please!
I'm sorry if I sound stupid, I'm trying not to, I'm just really panicky and stressed right now.
I've tried searching through the forums - I still am searching through them, I'm sorry if I missed a post that can help me.
EDIT: I found someone who is also stuck in a boot loop... He seems to have SD Card issues as well, but doesn't speak English very well, so I don't thing he was able to communicate what his issue was...
Quote:
Originally Posted by GMK63
.......(---------THAT WHAT I FOLLOWED .
But I did the first part and They said i should get the stuff I store on my SD Card to pull out a file (``12) In CWM, use your volume up/down positions to navigate, scroll down to "Install Zip From SDcard". Select with a click of the power button. Navigate to where you put sms-T959V-KJ6-v0.1.1-rc1-unsigned-update.zip (in the root of your SDcard) and select with the power button. Confirm you want to install.
``)
but it doesn't give me the option to go get it on my SDcard and Now my Phone just turns on and off with the samsung galaxy S logo plus T-mobile exclusive logo . The only possitive thing about all the damage is that I can still put my phone on dowload mode and I just think if someone knows how to get my phone back to it state they will need me to put it on download mode.
Thank you in advance for your Help, for replying and offering to help.
I appriciate it. My phone is Mobillicity carrier just like wind .[/B]
Then, user bhundven replies to him saying:
Ok, this is really simple. I've explained it in quite a few threads in the Galaxy S 4G forums in General, Q&A, and the Dev forum. I'm going to explain this, but in a way to be more general. So I'm being verbose in case anyone else with a T959W happens to run across this and has not tried anything yet.
Again, I'm not good with windows at all, and I prefer it that way.
If you're on windows, check out our wiki:
http://forum.xda-developers.com/wiki...xy_S/SGH-T959V
There is tons of help there for setting up heimdall on windows with all the right drivers and such.
Once you have heimdall setup get AntonX's latest cwm zip for his kernel.
This kernel is a BML kernel, and this guide I am giving you right now will help you get cm9 installed which is an MTD kernel. You can find out more about BML vs. MTD here.
Once you have downloaded AntonX's kernel, extract the zImage from it and open up the terminal/cmd prompt and navigate to the directory you extracted the zImage to.
Put your phone into Download Mode and type the following in the command prompt:
Code:
heimdall flash --kernel zImage
The heimdall program will flash this kernel+initramfs to the kernel partition and reboot the phone. Do not unplug the usb cable until you see the "Galaxy S" screen. When you see that screen, unplug the usb cable and remove the battery from the back.
Assuming you downloaded CM9 and put it on your sdcard already, you can get into recovery by holding the vol+ and vol-, then pressing the power button to turn the phone on. When you see the "Galaxy S" screen, let go of the buttons, and you should be in the recovery now.
This is where things get a little tricky. If you have not tried to do anything to your phone yet. This would be a great time to use the "Backup and Recovery" menu on CWM. Do a full backup.
The "assert 7" error that the previous person got was because the cwm install script (the updater-script) checks the already installed /system/build.prop's data against the "to be installed" build.prop to verify this rom can be installed. If it doesn't exist, then it moves forward.
So the first order of business is to wipe the /system partition. Go to "Mounts and Storage" and format the system partition.
Now go back to the main screen and do "Factory Reset/Wipe Data".
Now go "Install zip from sdcard" -> "choose zip from sdcard" -> and use the volume keys to select the zip file.
After the rom is installed, navigate back to the main screen and "Reboot the system now" if it doesn't reboot by itself.
When the phone reboots, because it is going from BML to MTD, it obviously can't just install the files to what would be an MTD partition if the kernel knows nothing about MTD. So it boots into the newly installed MTD kernel and continues the installation, which in the end will also reboot again.
The first boot is very slow. It is building a cache of all the pre-installed system applications. Let it sit for a while. I know it's tempting to go play with your phone right away, but resist if you can.
The next CM9 release will be on a different kernel, and albeit a much better rom.
I will also be adding OTA Asserts for SGH-T959W so that you will not have to wipe /system before installing the rom, but I do that still just for good measure. But this also means that your phone will work properly with the google play store.
If this still does not work, please let me know what went wrong and I will be happy to assist!
-Bryan
Is what Bryan is saying my solution? I don't think he understood the SD Card mount issue. Does anyone know how to fix that? I really hope to hear from you guys ASAP before my dad catches on... Please. I really need help. I'll search more in the morning, it's 1 AM here.

Okay well first of all.. GET A GRIP OF YOUR SELF
*slaps twice across the face
This phone is unbrickable so can you get in to download mode? (power off phone then when it's off hold the volume up and down buttons at the same time, while holding them down connect your phone to a usb cable)
A green android digging thing should show on your screen. Tell me when you get this far.
Sent from my HTC VLE_U using xda app-developers app

As a matter of fact, you don't entirely need a download mode screen to recover your device too. I've gotten to a pixelized colorful screen and thought my phone was done for, but Odin/Heimdall still recognized it, so I was able to recover my phone.
Calm down and as long as your phone can still be detected on your computer, you will be fine. Odin or Heimdall should be able to show that he device was "added" when you plug it in.

bkoon1218 said:
As a matter of fact, you don't entirely need a download mode screen to recover your device too. I've gotten to a pixelized colorful screen and thought my phone was done for, but Odin/Heimdall still recognized it, so I was able to recover my phone.
Calm down and as long as your phone can still be detected on your computer, you will be fine. Odin or Heimdall should be able to show that he device was "added" when you plug it in.
Click to expand...
Click to collapse
That's true, just make sure you have the drivers installed for the phone first and for the purpose of my method of recovery download Odin. If you did everything correctly you'll see a green light in Odin under recognized devices once you're in download mode
Sent from my HTC VLE_U using xda app-developers app

lonoguge said:
Okay well first of all.. GET A GRIP OF YOUR SELF
*slaps twice across the face
This phone is unbrickable so can you get in to download mode? (power off phone then when it's off hold the volume up and down buttons at the same time, while holding them down connect your phone to a usb cable)
A green android digging thing should show on your screen. Tell me when you get this far.
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
Thanks for the slaps, I needed them!
Yes! I think I am still able to get into download mode, atleast I was able to last night (After the loop issue). Also, I formatted (factory reset option or something?) my settings when I was in CWM last night assuming that would change it back to the way it was, or atleast fix the SD mount problem..I hope this doesn't cause any issues.
What should I do when I'm in download mode?
bkoon1218 said:
As a matter of fact, you don't entirely need a download mode screen to recover your device too. I've gotten to a pixelized colorful screen and thought my phone was done for, but Odin/Heimdall still recognized it, so I was able to recover my phone.
Calm down and as long as your phone can still be detected on your computer, you will be fine. Odin or Heimdall should be able to show that he device was "added" when you plug it in.
Click to expand...
Click to collapse
That's great news! It's nice to hear that someone who's phone was also messed was able to repair it.
lonoguge said:
That's true, *just make sure you have the drivers installed for the phone first and for the purpose of my method of recovery download Odin. *If you did everything correctly you'll see a green light in Odin under recognized devices once you're in download mode
Click to expand...
Click to collapse
Where can I get these drivers? Should I download the latest version of Odin?
I'll try this as soon as I get back from taking my little sister to school.
I just want to say again, this is the SGH-T959W from WIND in Canada. It's apparently the same hardware as the SGS4G from T-Mobile, just different software. I hope this isn't a problem.
Thank you both for replying so soon. After tossing and turning in bed for the last 5 hours, barely getting any sleep, it's such a relief to read these posts!

Obviously you didn't read too much if you bought the phone and tried to mess with it the same day. You would have seen if you went to the 2nd page of here and actually read something like this, http://forum.xda-developers.com/showthread.php?t=1552119 where I clearly say, it is it different, you will get boot looped, I am working on a package to fix it, and for anyone on a wind phone to hold on and wait.
I don't have time to try and help and fix every single wind phone in the world because people get too impatient and start flashing everything in the world from the first post they read. Odin and Heimdall fail at certain parts of flashing this phone. I am trying to give the Heimdall creator as much as I can to help fix this, so everyone telling to flash this or that package, it's not going to work, it will fail. I have verified this 100 times with Heimdall.
I can't put together a 1click package that fails flashing, that's why people are ending up in this position in the first place.
I can get your phone fixed but not right this second. There is no permanant damage done, and the less you just keep flashing random stuff, the more likely the chance I can help you fix it, but I'm busy, I run my own business and my paying customers come first as does my mortgage and bills before spending an hour teamviewed into someones pc to fix this.
So hang tight, I will try later to get this fixed, it's not screwed, quit flashing anything you find.

Past what getochkn just said (and please do ignore the "advice" given by people who don't experience with a T-959W), next time you see a "helpful" post on some site that starts off "get this from [the original source]" -- please, please take the time to read the original source.
Secondly, just because your phone has the a similar "trade name" as another phone doesn't mean they are even close to the same inside. Even the model numbers don't mean much. Firmware from a T-959 generally won't work on a T-959V, and, as you have found out, T-969V firmware can make a T-959W a nice paperweight for a while.
Thirdly, I just don't "get" why people even consider flashing their phone on the first day they own it, before they have any idea what it came with and what it can do, not to mention voiding their warranty before even the buyer's remorse period has expired.
While you're waiting for someone to bail you out, you might want to take the time to download Java, the Microsoft C++ executables, and a full version of Heimdall.

getochkn said:
Obviously you didn't read too much if you bought the phone and tried to mess with it the same day. You would have seen if you went to the 2nd page of here and actually read something like this, http://forum.xda-developers.com/showthread.php?t=1552119 where I clearly say, it is it different, you will get boot looped, I am working on a package to fix it, and for anyone on a wind phone to hold on and wait.
I don't have time to try and help and fix every single wind phone in the world because people get too impatient and start flashing everything in the world from the first post they read. Odin and Heimdall fail at certain parts of flashing this phone. I am trying to give the Heimdall creator as much as I can to help fix this, so everyone telling to flash this or that package, it's not going to work, it will fail. I have verified this 100 times with Heimdall.
I can't put together a 1click package that fails flashing, that's why people are ending up in this position in the first place.
I can get your phone fixed but not right this second. There is no permanant damage done, and the less you just keep flashing random stuff, the more likely the chance I can help you fix it, but I'm busy, I run my own business and my paying customers come first as does my mortgage and bills before spending an hour teamviewed into someones pc to fix this.
So hang tight, I will try later to get this fixed, it's not screwed, quit flashing anything you find.
Click to expand...
Click to collapse
THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU!
I really didn't read enough, big mistake, I was just really cocky because I've modded almost every device I own (Wii, PSP, PS3, PS2 various and iDevices [mine, and friends]). Of course, they're all different (Not saying it's all the same thing! ), I just felt very confident because I've never had issues with anything before. At least this is a good learning experience, I've really been put in my pace. I always felt that bricking was something that happened to other people, it doesn't happen to me. I know that sounds stupid, but idk, that's just how I felt. I physically feel sick over this 'whole ordeal (Seriously), I'm such an idiot. >.<'
Thanks for the warning, I won't flash anything! I'm so relieved to hear that there's no permanent damage done, and to be able to speak to someone who's familiar with this specific problem and this specific model of the SGS4G, AND is willing to help me!
Do you know when you'll be able to help me? Of course, take your time, I completely understand that you have other stuff going on, I'm just wondering to see if I can maybe think of some cover up so my dad doesn't find out.
Also, I have a 14 day warranty, is it void now even though the root didn't work? I'm assuming it is.
Edit: Yup, if what jeffsf says is true, it's void.
jeffsf said:
Past what getochkn just said (and please do ignore the "advice" given by people who don't experience with a T-959W), next time you see a "helpful" post on some site that starts off "get this from [the original source]" -- please, please take the time to read the original source.
Secondly, just because your phone has the a similar "trade name" as another phone doesn't mean they are even close to the same inside. Even the model numbers don't mean much. Firmware from a T-959 generally won't work on a T-959V, and, as you have found out, T-969V firmware can make a T-959W a nice paperweight for a while.
Thirdly, I just don't "get" why people even consider flashing their phone on the first day they own it, before they have any idea what it came with and what it can do, not to mention voiding their warranty before even the buyer's remorse period has expired.
While you're waiting for someone to bail you out, you might want to take the time to download Java, the Microsoft C++ executables, and a full version of Heimdall.
Click to expand...
Click to collapse
I'm just very impatient sometimes. I really do enjoy doing this kind of stuff, it's fun for me. I just got really excited and wasn't thinking straight and just went out and tried rooting it. I've wanted an Android for a while now, and have always planned to root it to unlock it's full potential. I've never modded anything else day 1 (and never will again), this is the first time I've done this. I feel terrible about it.
Will do, thanks for helping, jeffsf.

If your still under 14 days return it with a stupid I don't know what happened look. If its stuck just on the tmob screen they most likely will never know what you did. Your other choice is to be a man and own up to it. Tell your dad and take your lumps. That choice is yours. Give it serious thought before you choose as it might define what type of person you end up becoming.

hechoen said:
If your still under 14 days return it with a stupid I don't know what happened look. If its stuck just on the tmob screen they most likely will never know what you did. Your other choice is to be a man and own up to it. Tell your dad and take your lumps. That choice is yours. Give it serious thought before you choose as it might define what type of person you end up becoming.
Click to expand...
Click to collapse
I feel like they might know. I'm willing to try it as a last resort, I'd like to give getochkn a shot first.
I'll tell my dad what happened after it's fixed. I just can't deal with him stressing me out about it more than I already am.

I will have a package probably tomorrow that will provide as detailed instructions as I can.

getochkn said:
I will have a package probably tomorrow that will provide as detailed instructions as I can.
Click to expand...
Click to collapse
Oh, wow! That's much sooner than I was expecting! Thanks for taking the time to do this for me, it really means a lot. Thank you so much getochkn!

Package and instructions here.
http://forum.xda-developers.com/showthread.php?t=1956025

getochkn said:
Package and instructions here.
http://forum.xda-developers.com/showthread.php?t=1956025
Click to expand...
Click to collapse
Thank you so much getochkn!
I read all the instructions before attempting this. But, I have a problem. Heimdall failed to flash. It said something about failing to retrieve the PIT or something? So, I tried again. Didn't work. So, I restarted my computer, and my phone.
Phone doesn't go into download mode, instead, I end up on a screen saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
What should I do?

BagelBreath said:
Thank you so much getochkn!
I read all the instructions before attempting this. But, I have a problem. Heimdall failed to flash. It said something about failing to retrieve the PIT or something? So, I tried again. Didn't work. So, I restarted my computer, and my phone.
Phone doesn't go into download mode, instead, I end up on a screen saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
What should I do?
Click to expand...
Click to collapse
That firmware screen should detect as download mode still in Heimdall. I have gotten that and reflashed from Heimdall before. Not sure why it's trying to download the pit, it should only do that when you tell it to download pit. Flashing shouldn't trigger that. See if Heimdall will detect it in that firmware recovery mode and I guess try again, otherwise your phone is really borked.

getochkn said:
That firmware screen should detect as download mode still in Heimdall. I have gotten that and reflashed from Heimdall before. Not sure why it's trying to download the pit, it should only do that when you tell it to download pit. Flashing shouldn't trigger that. See if Heimdall will detect it in that firmware recovery mode and I guess try again, otherwise your phone is really borked.
Click to expand...
Click to collapse
Thank you for the quick reply!
It worked! I really can't thank you enough! Thanks again for taking the time to do this!
I think it may have said "Uploading Pit" because it said it again this time, but it didn't encounter a problem when it did that.
I know I have 3 choices, the one I would like to choose is ICS. Would mind pointing me in the direction of an ICS ROM that's compatible with my device? I'm afraid to use something that may not work and mess up my phone again.
EDIT: Actually, I think I'll just stick with this. I just installed the twist kernal and the modem, everything works, I'm rooted and have recovery. I'd rather not mess with it until I'm more experienced with droids.
Thanks again everyone, especially you getochkn! I'm so relieved that my phone is working again! My dad didn't notice that I wasn't using the new phone I got, so I didn't have to cover up or anything.