Related
What have we accomplished so far? List your personal running kernel/ROM combos that you are using for the best (and tested) battery life. Let others benefit from your experiences! Thanks!
Das bamf and drods 1.8 bfs kernel set at 1.45. Usually get around 15ish hours with moderate use.
Sent from my ADR6400L using XDA App
Fyretech rom with imoseyon kernel 1.92 dialed down to 1.792, setcpu, atk. Today is the first day running this combo phone has been on since 7am, moderate use (phone calls, texts, games, internet and youtube,) its 10pm now and i have 39% left on battery. I would have had to charge my phone at least once today when it was new out of the box.
EDIT: using 3g, 4g not available yet in central Jersey.
I'm using the bamf v4.3a kernel with the stock rom. i'm also using setcpu set for the 'ondemand' governor and a profile that underclocks the cpu to 245/245mhz when the screen is off.
BAMF 1.4 sense remix, with adrenaline (spelling? 4.4.2 kernel, dark horse theme, auto rotate Rosie (Saweeeet!) Optimal setcpu settings. Ie: charging profile (245 mhz min- 1.0ghz max/smartass) with this setting I normally get almost 1% battery charge increase a minute. screen off profile (700's mghz-1ghz/on demand. Screen on profile (1.1ghz-1.3ish ghz/smartass. etc... I know some stuff I mentioned doesn't really pertain to battery life, but this set up is just sick! Also, I read somewhere that its a good idea to let ur battery die completely, then turn phone on without charging (you may have to just a bit to get it back on) And let die again. This supposedly tells the phone where the dead zone is on the battery accurately, so it can now get a full clean battery charge. Myth? Idk, but damnit my battery is sick now! Hope this helps.
Sent from my ballerific, sick nasty, purely DopeDiculous, T-Beezy with that LTE-Z!
Personally, I've been testing Imoseyon [ROM] Tesla Coil Version 1.5, with Imoseyon [Kernel] leanKernel: minimal kernel "battsaver" .92 version. I am running it on "On Damand" with charging and screen off profiles, mobile data NOT on auto sync, Tasker for wireless ON at Home and audio OFF at nite.
Really, this seemed to have doubled my battery life. I was having to charge before the end of the work day with moderate use and now have been able to use well into the night.
Hope to see even more Rom/kernel concoctions out there as I love to try any new suggestions.
With adrenalines (I still don't memorize the spelling! Lol) 4.4.2 kernel it deff charges waaay faster as stated. Setcpu charging profile to lowest mghz min to around 1ghz max on smartass. Not demand, n it will bounce around to proper mghz levels as needed to speed up charging process. Its sweet n like you, I'm open for more suggestions
Sent from my ADR6400L using XDA Premium App
Adryn's debloat ROM and his kernel, with extremely light usage I pulled 38 hours (my previous record was 36). I have been using my phone for the bare minimum, so this is why I got so high. No, this is not real world usage and yes, I hated it, but it works. My normal battery life is somewhere closer to ~18 hours, except on Tuesday's and Thursday's, when I have lecture classes, I usually pull 9-10 hours, because I play games and browse the internet for 2 and a half hours.
Using imoseyon kernel 1.4 extreme(InteractiveX governor) with Tesla Coil 1.5. I have an extended battery, and with moderate use my phone can easily make it through one day into the next before needing to be charged.
Screen off and plugged in.. ;-)
I think it would be best to post in your stats whether or not you have 4g enabled as there are large populations of each way and it makes a significant difference.
IISiDeK1CKII said:
__________________
HTC Touch > HTC G1 > Apple iPhone > Apple iPhone 3G > Droid Eris > Droid > Droid Incredible > Samsung Fascinate > HTC Thunderbolt
Click to expand...
Click to collapse
Ha! You change phones a lot! My lineage is >>>Samsung MM-A900 flip phone>>>Samsung Jack (Windows)>>>Droid Eris>>>HTC Thunderbolt
ph0tios said:
Using imoseyon kernel 1.4 extreme(InteractiveX governor) with Tesla Coil 1.5. I have an extended battery, and with moderate use my phone can easily make it through one day into the next before needing to be charged.
Click to expand...
Click to collapse
What's the most noticeable of using with the extended battery? Extra cost, bulk or weight? Thanks.
johnchad14 said:
I think it would be best to post in your stats whether or not you have 4g enabled as there are large populations of each way and it makes a significant difference.
Click to expand...
Click to collapse
True...4g always enabled for me other then when I get no 4g signal and then 3g may go into effect. If no signal at all, then wireless when I am indoors.
I refuse to turn off 4g as that is why I got the phone and my coverage is pretty good for 4g...so, better battery life is a must for me
leankernel v .6 @ 1.41 on demand with das bamf 1.4 remix and i disable data when not using it and right now im at 56% battery at 32 hours with moderate use
I'm using imoseyons extreme kernel on interactivex governer on stock. I'm getting 14hrs %40 battery with moderate usage. I'm mostly on wifi all day with a little of 3g use.
Sent from my ADR6400L using Tapatalk
Huge *NOTE!*
Go to settings, menu, wireless networks, mobile networks and uncheck the third box. No need to have mobile data always on for most peeps . You'll still have 4G n everything, but gain a good 1-2 maybe more hrs (depending on use, kernels, governor settings, and I/O scheduling. I personally am running BAMF 1.6.2 with adryns 4.4.7 kernel, no set CPU, using tool box for that at 245mhz min - 1.02max with ondemand governor and most importantly SIO Scheduler. Try these n you will have amazing performance and better battery life. Let me know you opinions
Sent from my ADR6400L using XDA Premium App
I've always read in the past that the app doesnt actually help with battery life because its purpose was for OCing and Android regulates the cpu clocks already.
So I'm wondering, for those currently using it, have you noticed any difference in battery life (without underclocking while in use)? and if so what profiles are you using?
regP said:
I've always read in the past that the app doesnt actually help with battery life because its purpose was for OCing and Android regulates the cpu clocks already.
So I'm wondering, for those currently using it, have you noticed any difference in battery life (without underclocking while in use)? and if so what profiles are you using?
Click to expand...
Click to collapse
I have just one profile, screen off= 216/216. I'm now on 14 hours with 30% left. Much better than before, when I was getting 11 hours at the most.
I also use the battery calibration app. But that's all I've done.
Just want to add I use wifi calling, and I run everything else, gps and syncing gmail and facebook is on. Screen is set to auto brightness. The only thing I have off is bluetooth.
Profondo_Rosso said:
I have just one profile, screen off= 216/216. I'm now on 14 hours with 30% left. Much better than before, when I was getting 11 hours at the most.
I also use the battery calibration app. But that's all I've done.
Just want to add I use wifi calling, and I run everything else, gps and syncing gmail and facebook is on. Screen is set to auto brightness. The only thing I have off is bluetooth.
Click to expand...
Click to collapse
I do the same.. just 1 screen off profile to underclock it to 216/216 when the screen is off
regP said:
I've always read in the past that the app doesnt actually help with battery life because its purpose was for OCing and Android regulates the cpu clocks already.
So I'm wondering, for those currently using it, have you noticed any difference in battery life (without underclocking while in use)? and if so what profiles are you using?
Click to expand...
Click to collapse
Android does regulate the cpu, but I don't think it will take advantage of more conservative governor modes unless you tell it to. That's only relevant if the kernel supports more conservative governor modes. And, as the other responses have pointed out, you can force Android to be more conservative by capping the max clock speed.
Hmm... Guess its worth a shot. Good lookin out guys.
when i go into setcpu there are alot of options to choose there is no auto detect like on my mytouch 4g. how did you guys get it to work. i picked the last option which was custom and it forced close on me.
charlieb620 said:
when i go into setcpu there are alot of options to choose there is no auto detect like on my mytouch 4g. how did you guys get it to work. i picked the last option which was custom and it forced close on me.
Click to expand...
Click to collapse
Yeah.. When I hit the tegra 2 option it wont let me change the governor.
You need to be rooted so that you can let set CPU have super user access. Are you rooted yet?
regP said:
Yeah.. When I hit the tegra 2 option it wont let me change the governor.
Click to expand...
Click to collapse
I think that that means that the kernel is not supported for the "automatic" governors. However, you can still create profiles to regulate the CPU based on perameters that you set, i.e. Screen off 216/216
jayohwhy said:
I think that that means that the kernel is not supported for the "automatic" governors. However, you can still create profiles to regulate the CPU based on perameters that you set, i.e. Screen off 216/216
Click to expand...
Click to collapse
So all G2x see the same in setcpu - no autodetect and only governor available is "driver"?
Will custom ROMs like CM7 change this?
SetCPU improved my battery life tremendously! Before I was losing about 15-30% and hour, since 8:30 this morning my battery only dropped to 73%. I set my active profile between 457mhz and 816mhz depending on remaining battery and it's still fast as hell.
rhinology said:
So all G2x see the same in setcpu - no autodetect and only governor available is "driver"?
Will custom ROMs like CM7 change this?
Click to expand...
Click to collapse
From what I've heard, yes, that is what every g2x setcpu user sees. I don't know whether CM7 will fix this, or maybe later versions of setcpu
jayohwhy said:
From what I've heard, yes, that is what every g2x setcpu user sees. I don't know whether CM7 will fix this, or maybe later versions of setcpu
Click to expand...
Click to collapse
Once we get some custom kernels, we should be able to change the governors in setCPU, dependent upon on what the kernel supports.
SetCPU Custom Frequencies for G2X
I got SetCPU today and was playing around with it and it looked like it was limiting my CPU all the time due to lack of profile, not just when I had the screen off per my profile so I looked into making a text file for custom frequencies and am posting it here since there doesn't seem to be any help for g2x with it.
This is a really simple file, tell me if you guys have any better ideas, I just put in:
216000,528000,712400,1000000
I'm attaching it. I put the file in my dropbox, grabbed it via the app and then moved it to /sdcard/setcpu.txt via astro file manager then loaded custom profile from within setcpu. Hopefully this saves someone some time or you can tell me if I'm going about this the wrong way
I'm sure it could be fine tuned more but I was getting irritated at how much of a pain it was to unlock the phone with it set too low, so for screen off I have it set to 216->528. You could add 254000 in or something. The phone seems to be as usable as before now with setcpu enabled like this while it should be limiting the cpu when the screen is off. It sucked (well not the battery) without a custom profile.
socalTNT said:
You need to be rooted so that you can let set CPU have super user access. Are you rooted yet?
Click to expand...
Click to collapse
rooted?????? what is that?
TheMightiest1981 said:
SetCPU improved my battery life tremendously! Before I was losing about 15-30% and hour, since 8:30 this morning my battery only dropped to 73%. I set my active profile between 457mhz and 816mhz depending on remaining battery and it's still fast as hell.
Click to expand...
Click to collapse
Yep, I agree. My phone has been off the charger for almost 9 hours, and I'm at 70%.
I have everything on, including wifi calling, and one profile in Setcpu for screen off 216/216.
Also used the battery calibration app.
Profondo_Rosso said:
Yep, I agree. My phone has been off the charger for almost 9 hours, and I'm at 70%.
I have everything on, including wifi calling, and one profile in Setcpu for screen off 216/216.
Also used the battery calibration app.
Click to expand...
Click to collapse
Im assuming u did little to no use. I did moderate use and im down to 52% after 4hrs
Sent from my LG-P999 using XDA Premium App
I tried that 216/216 profile and got the sleep of death followed by reboot loop every few minutes after the phone booted. wouldn't stop till I manually powered the phone down then back on. oh well... my phone idles fine anyway. wonder what clock speed android idles at by default.
charlieb620 said:
Im assuming u did little to no use. I did moderate use and im down to 52% after 4hrs
Sent from my LG-P999 using XDA Premium App
Click to expand...
Click to collapse
Actually, your assumption is wrong, as is often the case.
I'd quantify it more as normal use. Lots of texts, some games of Pro pool, a few phone calls, checking Pulse 3-4 times during the day for 10 minutes at a time, some mild web browsing and watching a few youtube videos.
I ended up at around 18-19 hours of of use.
Today, I'm off the charger for 8 hours, and I still have 45% left, and I would say that's with some moderate to heavy use.
regP said:
I tried that 216/216 profile and got the sleep of death followed by reboot loop every few minutes after the phone booted. wouldn't stop till I manually powered the phone down then back on. oh well... my phone idles fine anyway. wonder what clock speed android idles at by default.
Click to expand...
Click to collapse
Try upping it to 216/312 or a tad higher and you should be fine.
Hey guys,
Ive been using SetCPU since it was fixed for the sensation. I am curious about what others have observed as far as battery life and performance goes.
I am running 1.8Ghz with a cpu voltage of 1.265V (1265000uV).
My battery doesnt last all that long despite all the profiles I have in place. I guess thats expected when you overclock by that much, huh? Is it worth it though?
Im sure more of you out there have experience to share. Im not talking Quadrant and benchmark scores, Im talking REAL use!
I am beginning to feel that dropping the frequency down may be in order since I cannot find anything that needs 1.8Ghz to work on this phone. Plus, less frequency means less required voltage. That would mean more battery!
Anyone care to chime in with their overclock frequency + voltage and experience?
Matt
I'm also interested in getting some input from other users, without having to clog up the respective overclocking threads in the Development section.
Yesterday after work, I set up the 1.5Ghz Undervolted option using utking's tool (http://forum.xda-developers.com/showthread.php?t=1168707). I didn't see too much need to push my CPU too hard, and a stable UV always piques my interest.
I created a couple of basic SetCPU profiles (screen off, battery below 20%, temperature < 50C), and scaling on demand up to 1512Mhz, my phone took about another 7-8 hours of moderately heavy use (Navigation, Maps, Yelp, photos, etc.) before it was on its last legs.
Bear in mind that I've been using the Anker 1900mAh battery. But even after the OC-UV that I set up, this was at least as good of battery usage as before without any SetCPU or overclocking, and actually seemed to be a little bit better to be honest.
I just dropped down to 1.6Ghz @ 1.26V...
I couldn't keep my phone from freezing with anything less than 1.26V @ 1.6Ghz. We will see how this goes for a few days and compare to my previous 1.8Ghz @ 1.265V.
So far, speed seems to be FASTER than 1.8Ghz. My Quadrant score (only being used here for comparison reasons) was 2700 right off the bat, whereas 1.8Ghz would peak around 2700-2800 after several tries.
The carousel works much better! I can swipe through quickly and have it scroll with zero lag. I can also fast swipe and watch is spin nicely!
Google Earth and Maps is about the same as 1.8Ghz.
Before, at 1.8Ghz, I could probably get 16 hours out of my phone with VERY LIGHT use. (A few 2min phone calls, check mail throughout the day, check the web a little). I am charging the phone up and will report back later.
Matt
I went down from 1.62 UV to 1.5 UV,because I could not see any difference in general use nad in benchmarks(except Quadrant) and battery consumption is much bigger with 1.62 with exact same profiles on setCpu.I think that this is best compromise between speed and battery life and as far as I know this is native clock speed of 8260 Snapdragon.
mrg02d said:
I just dropped down to 1.6Ghz @ 1.26V...
I couldn't keep my phone from freezing with anything less than 1.26V @ 1.6Ghz. We will see how this goes for a few days and compare to my previous 1.8Ghz @ 1.265V.
So far, speed seems to be FASTER than 1.8Ghz. My Quadrant score (only being used here for comparison reasons) was 2700 right off the bat, whereas 1.8Ghz would peak around 2700-2800 after several tries.
The carousel works much better! I can swipe through quickly and have it scroll with zero lag. I can also fast swipe and watch is spin nicely!
Google Earth and Maps is about the same as 1.8Ghz.
Before, at 1.8Ghz, I could probably get 16 hours out of my phone with VERY LIGHT use. (A few 2min phone calls, check mail throughout the day, check the web a little). I am charging the phone up and will report back later.
Matt
Click to expand...
Click to collapse
How simple is it to temp-root and overclock? I am really only interested in overclocking to speed up Sense, and you said it performs better with a speed boost.
Sent from my HTC Sensation 4G using XDA Premium App
Very,very easy,just read this tread :http://forum.xda-developers.com/showthread.php?t=1168707
I have mine undervolted at VDD_1175000 and 1500MHz. I like it very much...makes a big difference in quadarant score, but not sure in reality how much faster. Battery life is fine (when the phone is on). Have not experiened FC's
I have modified eugenes batch file to push my kernel file and preferred speed after perma-temp-root and now is all in one click...
So here is a little update:
Its been about 8 hours since full charge and I am at 55% battery left.
1.6Ghz @ 1.26V, On Demand.
Ive been checking email, making a few calls, and surfing the net with both wifi and GPRS (was out of the network, away from 4G). I also played Angry birds for a little bit and showed off Google Maps and Earth to my Mom.
Now that Im back home, ive turned back on 4G...
Ive noticed a slight amount of hesitation while opening and closing things, but nothing bad.
I havent had any profiles kick in yet, but they will soon with the battery getting low. I will resist charging the phone and see if I make it through the night, using it as I need it. I will report tomorrow.
Matt
I must be doing something wrong.
I am rooted and running LeeDriods 1.2 Rom. When I launch setcpu the only options i have are 1000 mghz? WTF am i doing wrong?
i think at LeeDroid 1.2 you must not use setcpu but Demon control?
BigBoppa said:
i think at LeeDroid 1.2 you must not use setcpu but Demon control?
Click to expand...
Click to collapse
Hmmm, okay. I saw where set cpu was updated for the sensation in the latest release but it doesn't seem to support overclocking with this rom.
Shame that as i was about to get that rom and flash it onto my phone, glad i came in here now
Running Leedroid 1.0
Kernel @ 1.7ghz max, i have it set to 1.5ghz and 192mhz
Runs hot when i play finger racing or reckless racing or modern combat 2 or something intensive, but besides the heat, it drains just like it normally would to be honest, maybe a little quicker, definite speed increase in overall user experience, without an OC the rom just flops, better than stock but just crap, OC is needed.
Hi, my Triumph should be arriving in the mail in just a few days and i was wondering which is the best kernel or ROM and Kernel combination that is best for battery life? I've heard that battery life on the Triumph is not so good. Maybe it's false but i would still like to know.
jerenater10 said:
Hi, my Triumph should be arriving in the mail in just a few days and i was wondering which is the best kernel or ROM and Kernel combination that is best for battery life? I've heard that battery life on the Triumph is not so good. Maybe it's false but i would still like to know.
Click to expand...
Click to collapse
I would go with CM7
That's what i was planning on. Does your Triumph give you battery problems?
jerenater10 said:
That's what i was planning on. Does your Triumph give you battery problems?
Click to expand...
Click to collapse
The battery life is a lot better now with the latest builds of CM7 and MIUI.
I just use CM7 and leave wifi and bluetooth off, no juice defender or anything like that and I can easily go all day with no charge, typically about a day and a half and my battery is getting low but it really depends on what you are doing like games, wifi, videos and whatnot.
Before I think there was a problem with the battery draining while in idle but things have cleared up since then, There are also third party kernels you can OC and everything, but you can use them to undervolt as well to save some battery if you know what you are doing. over on androidforums there is a lot more chatter about this phone, just so you know.
ketjr81 said:
The battery life is a lot better now with the latest builds of CM7 and MIUI.
I just use CM7 and leave wifi and bluetooth off, no juice defender or anything like that and I can easily go all day with no charge, typically about a day and a half and my battery is getting low but it really depends on what you are doing like games, wifi, videos and whatnot.
Before I think there was a problem with the battery draining while in idle but things have cleared up since then, There are also third party kernels you can OC and everything, but you can use them to undervolt as well to save some battery if you know what you are doing. over on androidforums there is a lot more chatter about this phone, just so you know.
Click to expand...
Click to collapse
Thanks. I got my phone today and im loving it so far. Do you know which of those third party kernels are good for battery life and that i can install over stock? I'm not quite ready to install a ROM yet but i already did the HTC Thunderbolt Build.prop tweak and obviously im rooted.
It's usually not the kernel but whatever governor you have it set to use. Even the stock can get improved performance if you switch the governor to such--”performance”--but I'm probably not the guy to tell you about which one is best.
I also have the silly feeling a lot of misconceptions abound here...in the form of ”I changed this setting and now my device lasts longer..., oh btw I no longer play with it 24/7.” In other words, use drastically impacts battery performance. JuiceDefender is an amazing tool but it won't do you a bit of good if you're testing out your phone's Adobe Flash capabilities regularly.
Sent from my Wildfire S
The Savagezen and interactive (not sure if interactive is on any of the kernels for this phone.) gov isn't that great. At least not in my experience. I had SmartassV2 on my girlfriends phone and it got ~3600 on Antutu benchmark at 1.5 and when I used Savage at 1.5 she got ~1700. The interactive gov made my friends Dinc2 noticably slower. Just switching home screens it lagged to the point it was hard to get into the app to change the gov.
CM7 + TheOC kernel allows adjusting voltage & overclock or underclock. You really should flash a CM7 ROM. Having it just rooted can be dangerous because you're not using a custom recovery to make a backup image, and if something messes up, you don't have a backup ROM to restore. Going to a different ROM forces you to make a backup, then there's a backup to restore if you mess things up.
Governors just tell the CPU how fast to ramp up to a certain frequency, & how long to stay there. It's hard to balance fast ramp up (less lag), and low battery drain (spend more time in the lower frequencies). I like interactive/x, find that smartassv2 spends too much time in the mid frequencies (~500) even for light work. Using the app CPU Spy helps a lot to see what's going on. Also it tells you whether your phone is sleeping properly when screen is off, which is a big factor for battery drain.
Post pics of battery usage or comment which Rom has the best battery life for you, don't if you've only tried one Rom...
Sent from my insertcoined Sensation 4G with Beats Audio
rickyiswhite said:
Post pics of battery usage or comment which Rom has the best battery life for you, don't if you've only tried one Rom...
Sent from my insertcoined Sensation 4G with Beats Audio
Click to expand...
Click to collapse
I use Insert Coin 5.1.1, "Rom Cleaned" with LBE security. With heavy usage (2h music, 1h calls, 1h internet + screen) I can get minimum 14 hours. Same battery on GB stock rom 4h.
When I have fully charged battery on Friday afternoon, during the weekend (only have few phone calls, a little bit wifi) I plug it in at work on Monday with 15-20% left.
I have stock battery.
THE_Genius
The_Genius said:
I use Insert Coin 5.1.1, "Rom Cleaned" with LBE security. With heavy usage (2h music, 1h calls, 1h internet + screen) I can get minimum 14 hours. Same battery on GB stock rom 4h.
When I have fully charged battery on Friday afternoon, during the weekend (only have few phone calls, a little bit wifi) I plug it in at work on Monday with 15-20% left.
I have stock battery.
THE_Genius
Click to expand...
Click to collapse
i have IC 5.1.4 and the battery life his horrible when im using my phone, but during school i underclock to 1.02ghz max turn power saver on and data off and itll last... also have stock battery with 1.5ghz kernel
With ARHD 6.5.1, Sebastian's kernel and 1900 mA anker battery I can do 3 days of light usage, 2 of mid ones and of course 1 of heavy.
ARHD works for about 1.5 days moderate use and 3.5 days on minimal use.
i've never liked a custom kernel, it always eats up my battery faster than stock (based from my experience) even undervolting doesn't make it last longer.
baste07 said:
ARHD works for about 1.5 days moderate use and 3.5 days on minimal use.
i've never liked a custom kernel, it always eats up my battery faster than stock (based from my experience) even undervolting doesn't make it last longer.
Click to expand...
Click to collapse
Highly agree with custom kernels eating up the battery
Sent from my insertcoined Sensation 4G with Beats Audio
ARHD 6.5.1 battery life is very good.
I am now outlasting my partners iPhone 3GS with heavier use!
I can go a full day and still have 40-50% remaining.
Also there is no need to overclock. I use no frills cpu set to 192 min and 972 max. Very smooth and fast.
Phil
I don't understand how you guys are getting such excellent battery life on a Sense rom because I only get those numbers when I'm on Senseless. I guess I just have to try harder
Not sure.
All I can suggest is that you:
Make sure you are on correct radio/RIL
Super wipe
Reflash ROM
Use no-frills cpu and underclock to 972 max 192 min
Disable always on mobile data
Enjoy your phone
I have brightness set to auto. I have unlimited data so rarely use wifi.
Still on 100% from unplugging at 6:30 this morning.
Phil
dgenx210 said:
I don't understand how you guys are getting such excellent battery life on a Sense rom because I only get those numbers when I'm on Senseless. I guess I just have to try harder
Click to expand...
Click to collapse
Maybe it has something to do with your 1.7GHz OC...
philje123 said:
Not sure.
All I can suggest is that you:
Make sure you are on correct radio/RIL
Super wipe
Reflash ROM
Use no-frills cpu and underclock to 972 max 192 min
Disable always on mobile data
Enjoy your phone
I have brightness set to auto. I have unlimited data so rarely use wifi.
Still on 100% from unplugging at 6:30 this morning.
Phil
Click to expand...
Click to collapse
I have very limited data allowance [it's 50MB PAYG for what it's worth, like 1.50 in GBP] and I don't go out much so I just use WiFi at school and home. Radio is on 3.32 although I'm not sure about my RIL. And also I always enjoy my phone. Always
EDIT: RIL is HTC-RIL 4.0.0013HMQ. I always use Kohr-ah's stuff so I'm pretty sure that this was included it the 3.32FW i got from the thread.
GladiatoRiley said:
Maybe it has something to do with your 1.7GHz OC...
Click to expand...
Click to collapse
Um I haven't updated my sig in a while. I'm stock everything on VI 4.0.0 and SetCPU 648-972 ondemand.
dgenx210 said:
Um I haven't updated my sig in a while. I'm stock everything on VI 4.0.0 and SetCPU 648-972 ondemand.
Click to expand...
Click to collapse
There you have it!
You have your CPU set to a minimum of 648 mhz so it will never go any slower than 648 mhz.
I have mine set to the lowest (192 mhz) so that when it's not needed the CPU can run as low as 192 mhz.
Phil
philje123 said:
There you have it!
You have your CPU set to a minimum of 648 mhz so it will never go any slower than 648 mhz.
I have mine set to the lowest (192 mhz) so that when it's not needed the CPU can run as low as 192 mhz.
Phil
Click to expand...
Click to collapse
Well I already have a profile for screen off. 192-486MHz. Should I still lower it?
I hadn't seen a ROM on my phone that lasts more than 12 hours for moderate to heavy use. I wonder how everyone else is getting 1-2 days of battery life (happy for them, sad for me).
I don't install any other app apart from the stock ones available with the Rom, plus the XDA app. Can someone please share the secret?
Thanks!
Sent from my HTC Sensation 4G XE with Beats Audio using XDA
Getting terrible battery life on ARHD 6.5.3 with Sebatian kernel. SetCPU ondemand governor 192 min and 1.6 max. Screen off profile to 192 min 1 ghz max. Get about 5-6 hours of life with moderate use.
how long have you had the setup?
Sent from my GT-P7510 using xda premium