I have A problem with my Polaris. WLAN, Bluetooth and GPS is working fine, but GSM/3G isn't working at all. Sometimes (very very rarely) it will register to network, but i can't make or recieve any calls - even 112 emergency call. Device sometimes hangs while trying to make call and buzzing form speaker very loud.
I was trying all ROMS and all Radio ROMS included:
Radio_Murata_PPAS_1.58.21.23
Radio_1.59.44.02
Polaris_Radio_1.64.08.21
Polaris_Radio_1.64.06.04
Polaris_Radio_1.58.26.20
Polaris_Radio_1.58.25.14
Polaris_Radio_1.58.21.23
Thanks in advance for any help.
Related
Hi all.
Well, having updated to Darkforce rom and radio 1.15, I have *nearly* been convinced to switch to WM6 permanently. However, one issue is still plagueing me, and has been the same in all WM6 roms, no matter what radio I have installed.
When I get an incoming call, my headset will not reconnect. I hae to manually press the headset button to get audio to the headset, then again to answer the call. This does not always work. In WM5, my headset (Blutrek G2) can be in sleep mode, but the UNiversal always wakes it up for an incoming call.
Anyone have any ideas?
Thanks muchly.
Darkforce wm6 & radio 1.15 & sony hbh660: incoming and outgoing calls perfectly working without any button push.
Thanks for the reply. I've decided to ditch the Blutrek. Bought a Sony HBH-PV700 today and all is fine. Voice dial working as well
Apparently this is a problem with many different car stereo head units/handsfree kits. I would like to get some info on who has it working and who doesn't. If you could provide the info as follows.
I will start,
-Phone: ATT Fuze
-Head unit: Kenwood DNX 8120
-Rom: Elite RC3
-Radio version: 1.02.25.32
-Specific problem:
1. After hanging up after a call the bluetooth connection drops. A call coming in causes the phone to reconnect to the headunit and handsfree works again until I hangup again. To make a call from the headunit I have to re-establish the bluetooth connection from the phone or headunit first.
2. SMS feature does not work.
3. Battery icon on headunit works when first paired but shows completely empty all times after that.
-Works with other phone?: Yes, ETEN x800 (No SMS), Eten X500 (no SMS)
-Ever worked with this phone in any configuration?: No
-Fixes tried: Jetware Bluetooth Handsfree Extension. Fixes the battery level icon, doesn't fix connection drop problem, or SMS.
I really hope someone can shed some light on this and some type of fix.
-Phone: HTC Raphael
-Head unit: JVC KD-BT1
-Rom: ROMeOS 1.70.1
-Radio version: 1.02.25.28
-Specific problem:
1. I seem to have the same problem with the connection drop you describe. Although I'm not sure it's always.
2. SMS feature does not work either
3. Sometimes I can't acces my phonebook through the headunit, a reconnect most of the times does the trick.
4. Disconnecting the headunit from the phone will give an error. I have to shut down BT on my phone to disconnect, so I can connect another phone.
-Works with other phone?: Yes, Nokia 6230i
-Ever worked with this phone in any configuration?: No
-Fixes tried: -
-Phone: touch pro
-carkit: parrot mk6100
-Rom: wwe 1.90.401.1
-Radio version: 1.02.25.19
-Specific problem:
1. had the exact same problem. solved by installing jetware 1.30. now it never disconnects.
2. SMS feature dunno (never tried)
3. battery icon fixed also by jetware
-Works with other phone?: Yes, qtek 8310 (wm6, also with jetware), se z520i
-Ever worked with this phone in any configuration?: yes
-Fixes tried: Jetware Bluetooth Handsfree Extension - for me this solved all problems, including syncing the phonebook on the older qtek 8310 which didn't sync at all.
-Phone: HTC Touch Pro
-BT System: Windows Blue&Me
-Specific problem:
1. sometimes connects automatically to car system (which it should do) and other times it doesnt. very annoying when driving and assumed it has connected.
Stupid Kenwood... not the phone i love my TP
-Phone: ATT Fuze
-Head unit: Kenwood DNX 6140
-Rom: EnergyRom 2.0 Series build 32609
-Radio version: 1.12.25.19
-Specific problem:
SMS not working
AD2P not connecting. Just getting "No Device"
I even try to connect Via USB... no love there either, and it locked up the Kenwood.
I am going to try a few A2DP programs i found. will report back when i have more answers.
Dolph
Update: So I did some messing around with the system settings on my phone and one the DNX 6140. I found that if i delete the bluetooth profile off of both the TP and the Kenwood, then pair via the kenwood not the Touch Pro, disable A2DP and grant access to my phonebook. They seem to "play well together". The moment I enable the A2DP on the Kenwood I get issues. I turn off A2DP and the Kenwood acts like everything is fine again. I am going to see if there are any other A2DP profiles that I can install on my TP, then do some messing around. I'll keep you guys posted.
Update #2: I have officially paired my TP to use the handsfree function, Phonebook download with voice dialing, and A2DP for the Kenwood DNX 6140. If you have any questions on how I did it I will create another post below. you can also PM me.
-Phone: ATT Fuze
-Head unit: Dual HD6425
-Rom: NATF 4.5
-Radio version: The ATT leaked one
-Specific problem:
1. When a call ends, the phone won't hang up. I have to turn the phone off manually. I can't seem to hang up the call from the radio like I'm supposed to.
2. I get this background hum sometimes.
3. If I try dialing before the phone connects it will only connect as a hands free device and not A2DP.
Did you find a way to prevent automatic contact download to the Kenwood with the HTC Touch Pro. I have too many contacts to transfer. (i.e more than the Kenwood can handle)
Thanks
Jeffrey
1st post yay, glad I can be of "some" help here as everyone else I've looked someone else has answered before I get a chance to respond lol...but..
-Phone: HTC Fuze
-Head unit: Pioneer 9800BT
-Rom: Stock
-Radio version: 1.02.25.32
-Specific problem:
1. Haven't had any problems with the unit dropping the connection. I can make and receive phone calls just fine. When I dial from the remote control on the unit and use the "Make Call" and "End Call" buttons they work flawlessly.
2. SMS feature on the phone works, but the sound doesn't play through he car speakers. Is that what you meant?
3. Battery icon shows empty on mine too...It never did this with my old Kaiser.
-Works with other phone?: HTC Kaiser (No SMS)
-Ever worked with this phone in any configuration?: No
-Fixes tried: None yet.
Anyone battling with the Kenwood 9140? I've got a call into Kenwood - they said it (touch pro) was tested with 1.90.xx... (FRE) ROM. Nice - the US model they're selling has been tested with only a French ROM. Got a second reply back to contact Parrott (the 9140 has Parrott BT). They forwarded my info on to their OEM division...we'll see.
Oddly, I never had an issue with the Parrott 3000 aftermarket BT unit when I had it installed with an Alpine (who's OEM BT didn't work, either) prior to installing the Kenwood. I figured if Parrott could do it right as a stand-alone, it should be a piece of cake for an embedded version. *shrug*
-Phone: ATT Fuze
-Head unit: Alpine Iva-w505 with kce-400bt (with firmware v 2.51)
-Rom: Latest EnergyRom (issue persists across every version i've used)
-Radio version: 1.14.25.35
-Specific problem:
1. sometimes connects automatically to car system (which it should do) and other times it doesn't.
2. Forcing a connection doesn't always work, but the it will connect when a call is made or received
3. Same issues above affect both phone and audio streaming
4. using MS voice command, it'll loose connection after accepting the command you want. will reconnect a few seconds after the other party picks up the phone.
phone : pro 2
head unit : Bolero 1Z0 035 156F
ROM ver : 1.86.415.2(67102)
Radio ver: 4.49.25.17
1- the pro2 pair with the Bolero nicely with full phone book access with no problem in call droping
2- the sms function is not working not show on car screan and not even a notification sound
hope there is a solution for the sms prob
Hello,
For a couple of months i have been using a HTC Touch Pro.
Since then i have a problem connecting my phone to my car.
I am driving a Peugeot 206 with a build in radio, and i have no problems connecting the phone to the radio.
However when i try to call someone i can here the dialtune over the radio but when the person on the other side picks up the phone the connection drops out and i can`t here anyone. Only when i press the speakeroption on the phone i can speak to the person on the other side.
The same problem occurs when i get called and i pick up the phone.
The weird thing is before i upgraded my phone to the latest official ROM-update i was able to call people and i could actually use my build in bluetooth car function. But now after the update i cant do anything anymore.
I`m using the following ROM and Radio:
ROM: 5.05.404.1 NLD
Radio: 1.11.25.01
There must be a way that i can actually call someone, let stand pick up my phone in my car.
Hello,
since I've upgraded the ROM I am using now (Endymion) to the latest version (3.4) I have a strange problem.
I am opening a new thread because I am not pretty sure it is a ROM related issue (instead it could be a radio related problem, but this has never happened before, with the same radio I am using now). Kernel issue??
The problem is that if I activate the bluetooth and then connect my bluetooth headset, the call is like interrupted so I can't hear the voice of my interlocutor and vice versa for about 10-15 seconds. Then it goes as usual.
I've noticed this issue because I have a Tasker rule which activates the bluetooth if a certain person calls and if I am at home. But this happens even if I activate the bluetooth by hand.
Do you have an idea of what could the cause of this problem be?
I'm sorry, i can't really help you i just can tell you that i'm also on Endymion V3.4 and i often use a Bluetooth headset.
But everything works fine, i have no issues like you.
I often use Bluetooth headset too and the headset is working good for me, but it's the bluetooth activation that makes this problem happen.
Did you try to switch bluetooth ON during a call?
What radio do you use?
Yes i often switch on my Bluetooth headset during a call and I immediately hear the partner in my ear
I have never changed radio, because everything works fine for me (never change a running system).
The second reason is, that i can't flash radio, because I'm S-On. I used HTCDev in case of unlocking the bootloader.
I've actually not had a problem making or receving calls when using a Bluetooth head set.
However i have some time had problems listing to music on the headset when i'm out in public, however i think that might be the headset.
Would changing the radio change that?
Shamz84 said:
I've actually not had a problem making or receving calls when using a Bluetooth head set.
Click to expand...
Click to collapse
Again, such sentence tells me I wasn't clear enough.
I've never had a problem making or receiving calls when using a Bluetooth headset too!.
Indeed, the problem occurs when, and only when I activate the bluetooth during a call.
Hi all
I have a fully unlocked (from purchase) P5100 tablet which has been rooted for openvpn support. I set up a bluetooth headest with it and everything was ok.
After a few days mobile originiated GSM voice is no longer working properly although mobile terminating seems to work fine .
GSM Speakerphone calls ring once on the tablet then go silent. and this is total "audio shut down" silent, no hiss no nothing, the call proceeds but when the call is picked up at the remote (B party) end , there is no voice path either way but DTMF tones can be inserted to line from the keypad.
GSM tablet originated calls made with a stereo headphone (i.e. expecting to listen to the call on headphone using the tablets internal microphone) give the same result as GSM speakerphone
GSM inbound calls to headphones work as expected
VOIP calls route as expected
tried turning off BT and WIFI , rebooting , unpairing the BT headset ...no restoration of audio !!
Well....i'm stumped !!! anyone got any clues ???
regards
CQU
for the record - I have checked the obvious like the "in call" volume was set to maximum not set to "0"
try Reset factory setting
Factory reset hasnt fixed it, going back to supplier as 'not fit for purpose" under the sale of goods act
Specifically wanted a 5100 for gsm voice calling
Regards
CQU
same problem...
Hi, I've got the same issue...
Even after flashing several custom roms I can make between 0 and 2 succesful outgoing gsm phone calls after a reboot.
Maybe anyone knows a radio rom that works properly in the netherlands? I'm hoping that that might solve the issue. Unfortunately, samsung hasn't released a new version for the netherlands yet as far as I know...