Database Info

[Kernel] [GPL] Sense 2.6.32.21 OC/UV 1.51GHZ (CFS-Smartass-TUN)

This kernel is created specifically for sense roms It will more then likely not work in it current state on any AOSP based rom
Features
Overclocked to 1.51ghz and stable as ever (for most)
added in smartass and interactive cpu freq govs
added in TUN support
compiled v4l2 as modules
many more....
for a full list of changes check the commit log here
Quirks
Smartass wont scaled below 768mhz atm im looking into it stick with interactive for the best overall experience for now.
Source
Downloads:
Build 4​

Awesome! I'll give my feedback as to how it is working.
I did notice once a governor is selected you have to reset your Mhz or it will stay on 806 max. Also this kernel doesnt want to work with OC widget at all but works fine with SetCPU. I've always liked OC widget a little more as it uses less battery than SetCPU.
Great work so far BC your the man. Been running this bad boy and havn't had a single reboot @ 1.5ghz. Though my battery is going quick for some reason, dont know why

This'll work on the stock Sense?
^ Shift Faced

jesusice said:
This'll work on the stock Sense?
^ Shift Faced
Click to expand...
Click to collapse
yes it shall took me a bit but i found out the issue

i'm going to assume this works for stock rooted roms?

d1msum4lyfe said:
i'm going to assume this works for stock rooted roms?
Click to expand...
Click to collapse
Looks like it should, yes

Thank you very much for this. I can confirm that this is running well on stock.

cloverdale said:
Thank you very much for this. I can confirm that this is running well on stock.
Click to expand...
Click to collapse
^ Ditto
Now, coming from the Moment I've never used an OC kernel... anything I should know? Any tips?
^ Shift Faced

jesusice said:
^ Ditto
Now, coming from the Moment I've never used an OC kernel... anything I should know? Any tips?
^ Shift Faced
Click to expand...
Click to collapse
If you get random reboots, it means it's OCed a bit too high; just scale it back a bit and you'll be fine if that ever happens

Is this running at 1.5 all the time or does it throttle between ranges?
What is the default range?
Does the user have to do anything to enable or set the throttling?

zeropants said:
Is this running at 1.5 all the time or does it throttle between ranges?
What is the default range?
Does the user have to do anything to enable or set the throttling?
Click to expand...
Click to collapse
As noted above, I'm new to OC'ing but I'm pretty sure you have to set it to the ranges you want via something like SetCPU or OS Monitor. I believe default is gonna stop at 800mhz unless you scale it up.
EDIT: And thanks Impaler for the help!
^ Shift Faced

zeropants said:
Is this running at 1.5 all the time or does it throttle between ranges?
What is the default range?
Does the user have to do anything to enable or set the throttling?
Click to expand...
Click to collapse
Use SetCPU and select the Mhz/governor you want to use. Each Governor "Throttles differently"

jesusice said:
As noted above, I'm new to OC'ing but I'm pretty sure you have to set it to the ranges you want via something like SetCPU or OS Monitor. I believe default is gonna stop at 800mhz unless you scale it up.
EDIT: And thanks Impaler for the help!
^ Shift Faced
Click to expand...
Click to collapse
No problem, I'm here if you need anything else

What are some good range options?

I'm using 800 min 1.5ghz max interactive. Profiles I have setup: charging 1.5ghz performance, screen off 800 max 245 min
Bumped it up 1.1ghz min 1.5ghz max interactive, going to see how much that affects my battery life
Sent from my PG06100

Dread 7us said:
I'm using 800 min 1.5ghz max interactive. Profiles I have setup: charging 1.5ghz performance, screen off 800 max 245 min
Bumped it up 1.1ghz min 1.5ghz max interactive, going to see how much that affects my battery life
Sent from my PG06100
Click to expand...
Click to collapse
I have mine set to 768 min and 1.4GHz max interactive
Charging is 1.4 performance
screen off 245 min and 800 max interactive.
I don't want to push up around 1.5 until I'm sure this is more stable on my phone.

Dread 7us said:
I'm using 800 min 1.5ghz max interactive. Profiles I have setup: charging 1.5ghz performance, screen off 800 max 245 min
Bumped it up 1.1ghz min 1.5ghz max interactive, going to see how much that affects my battery life
Sent from my PG06100
Click to expand...
Click to collapse
there no real need to have it running at such high freqs all the time mine is set at 245 min 1.31 max usually n got no lag what so ever
the higher speeds are more for gaming and cpu intensive applications

todAY HAS been a good day for HTC EVO SHIFT 4g android development. downloading kernal now! thanks for the hard work

BC you need to set your Donation link up like Impaler. I dont have paypal and it says you have to log in. Impaler's lets you pay with just a credit card. I will send a donation if I can do it without a paypal account.

fifedogg said:
BC you need to set your Donation link up like Impaler. I dont have paypal and it says you have to log in. Impaler's lets you pay with just a credit card. I will send a donation if I can do it without a paypal account.
Click to expand...
Click to collapse
Hey, you clicked my donate link? Thanks!

SETCPU settings

I got setcpu yesterday and was wondering what profiles/settings people are using?
I've found with the screen off if I keep my minimum clock at 100hz it will freeze so I keep it at minimum 200 Max 400.

i set a profile where my minimum clock was at 200 but i am still getting shut downs. any suggestions?

Please STOP using SetCPU. It does not work so great on 2.2 ROMs.

diablo009 said:
Please STOP using SetCPU. It does not work so great on 2.2 ROMs.
Click to expand...
Click to collapse
I used it for OC's

41LY45 said:
I used it for OC's
Click to expand...
Click to collapse
If u r on a custom ROM, flash a kernel like say glitterballs. Then use the Voltage Controller app to set ur OC and UV (under volt) levels. These are more stable than SetCPU.
When using Voltage Controller, set the settings as "set for now" (this sets them temporary and resets upon boot). Use it for some time, and if u r comfortable with no freeze ups, etc, u can mark them as "set on boot" to make them permanent.

diablo009 said:
Please STOP using SetCPU. It does not work so great on 2.2 ROMs.
Click to expand...
Click to collapse
Thanks for your opinion.

diablo009 said:
If u r on a custom ROM, flash a kernel like say glitterballs. Then use the Voltage Controller app to set ur OC and UV (under volt) levels. These are more stable than SetCPU.
When using Voltage Controller, set the settings as "set for now" (this sets them temporary and resets upon boot). Use it for some time, and if u r comfortable with no freeze ups, etc, u can mark them as "set on boot" to make them permanent.
Click to expand...
Click to collapse
Thanks for the tip.
Swyped from my Froyo-ed Captivate.

I use it on OC kernel for CM7, as Voltage Control is not supported. I have it at min 400 max 1200 and it works wickedly.

adzidek said:
I use it on OC kernel for CM7, as Voltage Control is not supported. I have it at min 400 max 1200 and it works wickedly.
Click to expand...
Click to collapse
Min for captivates is 100. Putting min at 400 would only kill battery faster since the CPU is at 400 instead of 100 when idle.

[Q] Trickster MOD doesn't stick.

Hi all,
I'm still a noob in android, and I would like some help with Trickster mod. I've been using cromi-x 5.x with hund's kernel and app for a while,
and without a doubt, awesome ROM, great kernel, great performance, but high battery draining.
I would like to try the latest that's kernel, I think it's v7, but with a little more juice, but I can't figure how to make the settings of trickster mod to stick.
I've set the cpu and gpu frequencies, apply them and tried rebooting with and without the grace period with the same results. Everything remains unchanged.
Can someone guide me step by step?
Thanks in advance.
Sorry for my poor English.

HDias said:
Hi all,
I'm still a noob in android, and I would like some help with Trickster mod. I've been using cromi-x 5.x with hund's kernel and app for a while,
and without a doubt, awesome ROM, great kernel, great performance, but high battery draining.
I would like to try the latest that's kernel, I think it's v7, but with a little more juice, but I can't figure how to make the settings of trickster mod to stick.
I've set the cpu and gpu frequencies, apply them and tried rebooting with and without the grace period with the same results. Everything remains unchanged.
Can someone guide me step by step?
Thanks in advance.
Sorry for my poor English.
Click to expand...
Click to collapse
Make sure the kernel you're using is compatible with CROMi and not CM or AOSP.

cmendonc2 said:
Make sure the kernel you're using is compatible with CROMi and not CM or AOSP.
Click to expand...
Click to collapse
Thanks for the fast reply.
The kernel comes with CROMi install, so I guess it's 100% compatible.
Any leads?
Just for clearing, I'm on the lastest Asus bootloader and latest CROMi-X 5.3a.

You need to enable set on boot.

ebildude123 said:
You need to enable set on boot.
Click to expand...
Click to collapse
I've already done that...I think, but I'll give it a try.
So, if I understood, set the frequencies and select kernel under set on boot? No grace period or delay?
Thanks

What are you trying to set it to? You have 1.8 (or is it 1.6GHz) on performance and and 1.3GHz on balanced and 1GHz on PowerSaving. This is what I set the CPU profiles to in the rom.
I'm not sure trickster can change these.....

sbdags said:
What are you trying to set it to? You have 1.8 (or is it 1.6GHz) on performance and and 1.3GHz on balanced and 1GHz on PowerSaving. This is what I set the CPU profiles to in the rom.
I'm not sure trickster can change these.....
Click to expand...
Click to collapse
Wow...now I'm nervous...the Master has spoken :laugh:
Before all, thanks for your great job on CROMi-X :good:. You rock man. I wish Asus could keep up with you.
For now I'm using hund's kernel and changed balanced to 1400GHz with is app. Like I said before, it runs great, but battery pays the bill.
I've tried _that v7, but sometimes it lags on some apps. What I would like, was to set it, also to 1400GHz, and see how it behaves with speed and battery.
In my experience in balanced mode hund's kernel is a lot faster than _that. Maybe because _that in balanced mode varies between 1200-1300GHz.
On the other hand _that is more battery friendly.
But every time I've tried changing it with Trickster nothing happens. Can Trickster do the job? Or it's not possible?
Thanks

HDias said:
Wow...now I'm nervous...the Master has spoken :laugh:
Before all, thanks for your great job on CROMi-X :good:. You rock man. I wish Asus could keep up with you.
For now I'm using hund's kernel and changed balanced to 1400GHz with is app. Like I said before, it runs great, but battery pays the bill.
I've tried _that v7, but in balanced mode it varies between 1200-1300GHz, and sometimes it lags on some apps. What I would like was to set to 1400GHz and see how it behaves.
For all that I've read, _that is still developing for our tablet, and also I think is kernel is more battery friendly.
But every time I've tried changing it with Trickster nothing happens. Can Trickster do the job? Or it's not possible?
Thanks
Click to expand...
Click to collapse
:angel: Thanks for the kind words. No more the master than anyone else
I don't think that's kernel oc's the same way as hunds. You can go down but not up in trickster. The limit for balanced is 1.3 so you can't get to 1.4.
I have an idea though
Copy the cpu3.sh to cpu2.show in /system/etc
Then use trickster to knock the frequency down to 1.4. That should work

sbdags said:
:angel: Thanks for the kind words. No more the master than anyone else
I don't think that's kernel oc's the same way as hunds. You can go down but not up in trickster. The limit for balanced is 1.3 so you can't get to 1.4.
I have an idea though
Copy the cpu3.sh to cpu2.show in /system/etc
Then use trickster to knock the frequency down to 1.4. That should work
Click to expand...
Click to collapse
:laugh: If it doesn't go right, go left...wise words, Master Yoda
Will give it a try later and report back.
Many thanks.

sbdags said:
:angel: Thanks for the kind words. No more the master than anyone else
I don't think that's kernel oc's the same way as hunds. You can go down but not up in trickster. The limit for balanced is 1.3 so you can't get to 1.4.
I have an idea though
Copy the cpu3.sh to cpu2.show in /system/etc
Then use trickster to knock the frequency down to 1.4. That should work
Click to expand...
Click to collapse
@sbdags...you pull it of again.:laugh:
Working like a charm, faster and smother than ever. Now trickster is working (limited cpu to 1400 GHz), my tablet flies in balanced mode, and battery is holding on just fine, better than with hund's kernel.
Like I've said before...you rock man.
Many thanks, and keep up with your excellent work :good:

HDias said:
@sbdags...you pull it of again.:laugh:
Working like a charm, faster and smother than ever. Now trickster is working (limited cpu to 1400 GHz), my tablet flys in balanced mode, and battery is holding on just fine, better than with hund's kernel.
Like I've said before...you rock man.
Many thanks, and keep up with your excellent work :good:
Click to expand...
Click to collapse
You are welcome Glad it worked - I'll add it to the next installer

sbdags said:
You are welcome Glad it worked - I'll add it to the next installer
Click to expand...
Click to collapse
Sweet :victory:

sbdags said:
:angel: Thanks for the kind words. No more the master than anyone else
I don't think that's kernel oc's the same way as hunds. You can go down but not up in trickster. The limit for balanced is 1.3 so you can't get to 1.4.
I have an idea though
Copy the cpu3.sh to cpu2.show in /system/etc
Then use trickster to knock the frequency down to 1.4. That should work
Click to expand...
Click to collapse
Please clarify how to copy this file.. Where is it and what exactly i should do to let trickster settings stick?

eslamgenio said:
Please clarify how to copy this file.. Where is it and what exactly i should do to let trickster settings stick?
Click to expand...
Click to collapse
Both files live in the /system/etc folder. You will need root access to do it.
Rename cpu3.sh to cpux.sh and then rename cpu2.sh to cpu3.sh and then rename cpuz.sh tp cpu3.sh. That way your balanced mode will now be performance. Then trickster can move the freq down

Kernel OC

Ive tried Elemental x up to max on Exodus. What is a good OC setting and what could our phone handle? Max 29xx didnt work so well

cell2011 said:
Ive tried Elemental x up to max on Exodus. What is a good OC setting and what could our phone handle? Max 29xx didnt work so well
Click to expand...
Click to collapse
I know it's personal to you, but overclocking the Nexus 5 just makes no sense, it runs smooth as it is already, and I'd suggest to just change the CPU governor to performance and up the amp from there, you can use kernel auditor which has a lot of options.

Question Poco X3 Pro Kernel

Hi,
Gpu overclock is my reason to root poco.
I'm new to this I want to ask if KonaBess works with Poco X3 Pro ?
I know that works with 855/855+ and anybody tested this ?
Is there Kernel for Poco X3 Pro that increase Gpu Freq to 700-800 Mhz for gaming ?

Overclocking to 700Mhz is useless for me, because GPU from SD860 has 675Mhz as max. frequency.
And yes - messing with KonaBess cause reboot under heavy load.

wojownikhaha said:
Overclocking to 700Mhz is useless for me, because GPU from SD860 has 675Mhz as max. frequency.
And yes - messing with KonaBess cause reboot under heavy load.
Click to expand...
Click to collapse
But to 750-765 or 800 Mhz is worth it ,but someone tell me that snapdragon 860 is first chip with " seems like frequency tables for 860 is locked . TZ locked "
So i don't know about this staff is that possible that 860 can't be overclock with konabess or kernel ?
That is why I want root.

astronomy2021 said:
So i don't know about this staff is that possible that 860 can't be overclock with konabess
Click to expand...
Click to collapse
Update: successfully overclocked to 685Mhz using KonaBess What a success.
Let's try 695Mhzh... That's too much.
Mabye 690Mhz?
Yeah - 690Mhz is perfectly stable.

wojownikhaha said:
Update: successfully overclocked to 685Mhz using KonaBess What a success.
Let's try 695Mhzh... That's too much.
Mabye 690Mhz?
Yeah - 690Mhz is perfectly stable.
Click to expand...
Click to collapse
How many Antutu scores do you get with 685Mhz?

@keyzjn
I am using 3D Mark as benchmark.
See scores for each frequency below.

@wojownikhaha Thanks for help
You are using Konabess from github this https://github.com/xzr467706992/KonaBess ?
Overclock is on Turbo_L1 or Turbo_L2 ?

astronomy2021 said:
You are using Konabess from github this
Click to expand...
Click to collapse
Newest 0.14 version
astronomy2021 said:
Overclock is on Turbo_L1 or Turbo_L2 ?
Click to expand...
Click to collapse
NOM_L1. I was curious how much we can get from stock voltage. And the answer is: 690 Mhz.

Can we increase voltage on Poco X3 Pro to OC like 750 Mhz ? How is possible that someone is overcloking 865 to 905Mhz ?

I looking in chiness to find right setting for 855 and Find this 730 Mhz/ Vot NOM and NOM_L3 785 Mhz ?

astronomy2021 said:
I looking in chiness to find right setting for 855 and Find this 730 Mhz/ Vot NOM and NOM_L3 785 Mhz ?
Click to expand...
Click to collapse
I tried 730mhz NOM but failed

keyzjn said:
I tried 730mhz NOM but failed
Click to expand...
Click to collapse
730Mhz is unstable even on NOM_l3

wojownikhaha said:
730Mhz is unstable even on NOM_l3
Click to expand...
Click to collapse
what about 700 mhz is voltage that will works ?

wojownikhaha said:
730Mhz is unstable even on NOM_l3
Click to expand...
Click to collapse
You need to know that how much hardware using voltage on some level, "it's not only gpu that you measure". Example cpu will use more voltage if it's freq is maxed, and your TFT/IPS screen Will use some voltage to if brightness maxed.
So if you use NOM_L3 on GPU, please calculate other hardware to successfully measure "hardware used resources voltage" for overclocking.
You need to install some battery measurements like accubattery or something to get value of current MaH used by devices and do overclock step by step to migrate NOM_L3
Mine works if cpu is downgraded from 2.4ghz to 2.2ghz, and with lowest screen brightness to do 850mhz on snapdragon 855

I think that gpu is tzlocked at 692mhz. Sadly so this is max freq from 855+/860 which we can get.
Maybe modifying kernel will unlock this.

astronomy2021 said:
I think that gpu is tzlocked at 692mhz. Sadly so this is max freq from 855+/860 which we can get.
Maybe modifying kernel will unlock this.
Click to expand...
Click to collapse
There's a kernel in the Telegram group.
• Performance improvements (No, it's not a gaming kernel)
And a probably related ROM
Also read what never00miss said in the reply, might even work on stock kernel.

Well, from my experience, that kernel definitely does not overclock, however, it makes the phone run really smooth, especially on custom roms. You can try doing it yourself (oc), or wait for gaming kernel. However, i dont see the need in overclocking this phone, really.
pl1992aw said:
There's a kernel in the Telegram group.
• Performance improvements (No, it's not a gaming kernel)
View attachment 5307021
And a probably related ROM
View attachment 5307025
Also read what never00miss said in the reply, might even work on stock kernel.
Click to expand...
Click to collapse

Ad3s12 said:
Well, from my experience, that kernel definitely does not overclock, however, it makes the phone run really smooth, especially on custom roms. You can try doing it yourself (oc), or wait for gaming kernel. However, i dont see the need in overclocking this phone, really.
Click to expand...
Click to collapse
I don't need OC either.
Smooth, issue-less, and good battery backup longevity is enough.

Hi,
Yup tested on mi 9 miui 12.5. Works perfectly fine. In a few days I'll try undervolting a little bit.

Yeh but Mi 9 happy has 855 not 855+/860 so Gpu can be overclock up to even 850 MHz with no problem.