Related
People who are stuck with 4.5.1-134_DFP-13XX Kernels and or any BL6 SBFs may now freely switch between any kernels they require.
Say for example, to upgrade to Walter's fixed SBF of 4.5.3_109 Kernel from 4.5.1-134_DFP-13XX, do the following.
1. Flash Defy-BL6Downgrade-CDT.sbf through RSD Lite.
2. Flash walter's 4.5.3_109 kernel sbf right away after that or an update zip package if you have a functional recovery. (Actually, you may flash any kernel. Even Froyo kernels)
You're done.
Wipe data/cache in case you get stuck at boot. No more bootloader errors.
This is based on http://forum.xda-developers.com/showthread.php?t=1486731
Credits go to dlhxr.
Note: If you have an SBF which you want to flash after this, just the BL6Downgrade-CDT.sbf is enough.
If you want to get into a custom recovery (only if you already have it), then you have to flash BL6Downgrade.SBF, or you will end up with a Bootloader ERR screen.
Files:
BL6Downgrade.SBF [34MB] - http://www.mediafire.com/download.php?vdpp0nnr5f12e95
i'm stuck with [SBF]Android 2.3.6 - 4.5.1-134-DFP-188
this will work?
[SBF]Android 2.3.6 - 4.5.1-134-DFP-188 is BL7
pss214 said:
i'm stuck with [SBF]Android 2.3.6 - 4.5.1-134-DFP-188
this will work?
[SBF]Android 2.3.6 - 4.5.1-134-DFP-188 is BL7
Click to expand...
Click to collapse
I haven't tested it with BL7. Could you check if it works?
PS: I was previously stuck with 134-DFP-1321.
Now on 4.5.3_109-25.
prasannavl said:
I haven't tested it with BL7. Could you check if it works?
PS: I was previously stuck with 134-DFP-1321.
Now on 4.5.3_109-25.
Click to expand...
Click to collapse
It cannot work with BL7，
because it is bl=6 2.2 Froyo SBF。
after you flash the SBF you can flash any BL>=4 kernel.
I just try it yesterday, so great.
So, i will try this.
I want so much use the MIUI on my Defy+
I can downgrade it using this method?
Hey guys,
I tried the steps mentioned above.
I had the 4.5.1-134-DFP-231 on my Defy+ and wasn't able to root it.
So I downloaded the Defy-BL6Downgrade.sbf and the 4.5.2-109-DHT-22-fixed.sbf and flashed them in this order with RSD Lite 4.9
Now my screen stays completely black. But it seems to enter the boot loader as RSD Lite shows the device as "connected..."
When I flash again, the screen turns on and shows "SW Update In progress".
But still no screen...
Any help on that?
Already posted
http://forum.xda-developers.com/sho... froyo kernel and green lense camera with bl6
Sent from my MB525 using xda premium
just tried here
and its WORKING!
THAAAAAAAAAAAAAAAAANKS SO MUCH
now im using the MIUI Pikachu Edition on my Defy+
dFde said:
Hey guys,
I tried the steps mentioned above.
I had the 4.5.1-134-DFP-231 on my Defy+ and wasn't able to root it.
So I downloaded the Defy-BL6Downgrade.sbf and the 4.5.2-109-DHT-22-fixed.sbf and flashed them in this order with RSD Lite 4.9
Now my screen stays completely black. But it seems to enter the boot loader as RSD Lite shows the device as "connected..."
When I flash again, the screen turns on and shows "SW Update In progress".
But still no screen...
Any help on that?
Click to expand...
Click to collapse
For now only what you can do is reflash it with DFP-231 to make it working and waiting for root like everyone with BL7.
Defy Plus 4.5.1-134 DFP-231 CEE
So we could say this is the ultimate setup for those with Obsessive-ROM Updating Disorder? So we can move freely between froyo and gb without flashing full sbf every time?
I can go to Froyo with flash this downgrade fix?
prasannavl said:
People who are stuck with 4.5.1-134_DFP-13XX Kernels and or any BL6 SBFs may now freely switch between any kernels they require.
Say for example, to upgrade to Walter's fixed SBF of 4.5.3_109 Kernel from 4.5.1-134_DFP-13XX, do the following.
1. Flash Defy-BL6Downgrade.sbf through RSD Lite.
2. Flash walter's 4.5.3_109 kernel sbf right away after that or an update zip package if you have a functional recovery. (Actually, you may flash any kernel. Even Froyo kernels)
You're done.
Wipe data/cache in case you get stuck at boot. No more bootloader errors.
PS: Can someone please test this with BL7 although it is quite unlikely?
This is based on http://forum.xda-developers.com/showthread.php?t=1486731
Credits go to dlhxr.
Files:
Defy-BL6Downgrade.sbf [34MB] - http://www.mediafire.com/download.php?vdpp0nnr5f12e95
Click to expand...
Click to collapse
Really ? Froyo kernel on a BL6 ?
Updated: Only flashing the CDT is enough to switch to another ROM. But that works only if you can flash another SBF, as the Bootloader with ERR would be shown right after.
In case you're planning to flash through recovery flash the one with the entire kernel. The BL6Downgrade.sbf [34MB] file. Or if you have an sbf of the next kernel you want to flash, then flashing just the BL6Downgrade-CDT is enough.
Epsylon3 said:
Really ? Froyo kernel on a BL6 ?
Click to expand...
Click to collapse
Turns out this is actually a Froyo Kernel resigned for BL6. So, its possible to flash any BL>=4.
Eramix3 said:
I can go to Froyo with flash this downgrade fix?
Click to expand...
Click to collapse
Yes, you can. As long as its any BL>=4
fiskenigaten said:
So we could say this is the ultimate setup for those with Obsessive-ROM Updating Disorder? So we can move freely between froyo and gb without flashing full sbf every time?
Click to expand...
Click to collapse
Not above BL7 though. Not yet.
It needs to be done, so as to work with new software based on BL7
Yes, you can. As long as its any BL>=4
Click to expand...
Click to collapse
But i can flash sbf Froyo?
I cant downgrade to Froyo SBF. Call bootloader erro with BL6 rom. I never fleshed BL7 roms.
Eramix3 said:
I cant downgrade to Froyo SBF. Call bootloader erro with BL6 rom. I never fleshed BL7 roms.
Click to expand...
Click to collapse
i think you can flash only android 2.2.2 and above ... i'll try later and leave some feedback
Is there battery friendly froyo kernel similar to Walter GB kernel 4.5.2-109dht22 which can be used with cm7 on froyo builds.
Sent from my MB526 using XDA App
JDGC_U6_2.13.0 > BL6Downgrade-CDT > JORLA_U3_3.4.2_107-9 = Bootloader Error
JDGC_U6_2.13.0 > BL6Downgrade > JORLA_U3_3.4.2_107-9 = Bootloader Error
JDGC_U6_2.13.0 > BL6Downgrade-CDT > JRDNEM_U3_3.4.2_177-005_NORDIC = Bootloader Error
JDGC_U6_2.13.0 > BL6Downgrade > JRDNEM_U3_3.4.2_177-005_NORDIC = Bootloader Error
DEFYPLUS_U3_4.5.1-134 > BL6Downgrade-CDT > JORLA_U3_3.4.2_107-9 = Bootloader Error
DEFYPLUS_U3_4.5.1-134 > BL6Downgrade > JORLA_U3_3.4.2_107-9 = Bootloader Error
DEFYPLUS_U3_4.5.1-134 > BL6Downgrade-CDT > JRDNEM_U3_3.4.2_177-005_NORDIC = Bootloader Error
DEFYPLUS_U3_4.5.1-134 > BL6Downgrade > JRDNEM_U3_3.4.2_177-005_NORDIC = Bootloader Error
Hi everyone,
I've tried looking around for answer to this, but could not find anything, or at least could not find anything that said it explicitly.
So the OTA update is now live in the USA, but here in New Zealand no OTA update is available.
Im on stock 2.3.6, and unrooted, and when searching for updates nothing is found.
Is there any way to manually apply the US 4.0.4 official update? Such as flashing an official fxz file?
Would be really appreciated if someone could help me out in lamens terms!
Thanks!
If you have an at&t phone follow the instructions here to get on the leak http://forum.xda-developers.com/showthread.php?t=1779968
After that you can OTA to the official, but we can't FXZ back from the official yet, so staying on the leak is still recommended.
Sent from my MB865 using xda premium
Scottyfer said:
If you have an at&t phone follow the instructions here to get on the leak http://forum.xda-developers.com/showthread.php?t=1779968
After that you can OTA to the official, but we can't FXZ back from the official yet, so staying on the leak is still recommended.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Hi, thanks for the answer.
It does not have stock AT&T, so is it still okay to follow the linked process?
Currently:
System version = 55.1.28.MB865.TNZ.en.NZ
Android version = 2.3.6
Kernal version = [email protected]#1
Baseband version = 2012-02-03 07:56 Off.Bld LUD_EDISON_R1E_PATCH_24_120203_0746 ... (just in case this would create an issue doing OTA update?)
idobbim said:
Hi, thanks for the answer.
It does not have stock AT&T, so is it still okay to follow the linked process?
Currently:
System version = 55.1.28.MB865.TNZ.en.NZ
Android version = 2.3.6
Kernal version = [email protected]#1
Baseband version = 2012-02-03 07:56 Off.Bld LUD_EDISON_R1E_PATCH_24_120203_0746 ... (just in case this would create an issue doing OTA update?)
Click to expand...
Click to collapse
Then it would not work. The update checks for at&t bloatware. As of now I have not seen any update files for the New Zealand version.
Sent from my MB865 using xda premium
ins't there any way to update, like other phones using cwm and instaling a custom rom?
DIDNT HAVE ENOUGH time to finish post, will finish soon, got school right now so dont start till i have finished it!!!
EDIT: finished
Heya fellow NZ'er, I got my motorola atrix 2 on ICS , and im here to help!
So follow these steps to get it working, First off, get moto-fastboot, extract it, and get the all the files inside into C:/Users/*Your name*/HERE.
Once that is done, get this file WARNING: its around 350MBs. Extract that file into C:/Users/*Your name*/HERE So that you have a whole bunch of .img files and a few otheres in there.
Ok now the tricky part, flashing the files.
MAKE SURE YOUR BATTERY IS FULL!!!!
Put the Atrix 2 in fastboot mode by turning it on while holding power, vol up and vol down all at the same time. (I prefer holding vol up and down together first, and pressing the power button.) then press vol down to get to a selection called "AP fastboot" and then press volume up.
Once there, make sure it has installed the right drivers (Should be like Mot single somethingarather device) and then go to start and type cmd in the search bar. go to the program and then once in command prompt, type in:
Code:
moto-fastboot devices
Then your phone should show up. Next just copy this and right click and paste into Command Prompt
Code:
moto-fastboot flash mbm allow-mbmloader-flashing-mbm.bin
moto-fastboot reboot-bootloader
Wait for it to come back again from reboot
Code:
moto-fastboot flash mbmloader mbmloader.bin
moto-fastboot flash mbm mbm.bin
moto-fastboot flash cdt.bin cdt.bin
moto-fastboot flash lbl lbl
moto-fastboot flash logo.bin logo.bin
moto-fastboot flash ebr ebr
moto-fastboot flash mbr mbr
moto-fastboot flash devtree device_tree.bin
moto-fastboot flash recovery recovery.img
moto-fastboot erase userdata
moto-fastboot erase cache
moto-fastboot flash system system.img
moto-fastboot flash webtop grfs.img
moto-fastboot flash preinstall preinstall.img
moto-fastboot flash radio radio.img
moto-fastboot flash boot boot.img
moto-fastboot reboot
Now hold the phone.(Literally) Now it may seem bricked. Well thats what happened to me.
Anyway take the battery out, and wait a Full 5-10 mins (And i mean actually get a stopwatch if you have to), then put it back in then leave it to charge for about 5-10 mins (Even though it was full when you started RIGHT??).
Now it should boot up normally and on its way to ICSdom!
Hey, cheers for the reply!
Is that the firmware from the "Atrix 2 MB865 Firmwares SuperThread (Ice Cream Sandwich)" thread?
Just wondering if I will be able to get back to current/an NZ version after flashing that? My atrix 2 still has over 2 and a half years of warranty remaining so, kind of want to keep it under warranty if possible. I'm sure if its sent in with firmware that doesnt match the IMEI, it will be coming straight back :S
idobbim said:
Hey, cheers for the reply!
Is that the firmware from the "Atrix 2 MB865 Firmwares SuperThread (Ice Cream Sandwich)" thread?
Just wondering if I will be able to get back to current/an NZ version after flashing that? My atrix 2 still has over 2 and a half years of warranty remaining so, kind of want to keep it under warranty if possible. I'm sure if its sent in with firmware that doesnt match the IMEI, it will be coming straight back :S
Click to expand...
Click to collapse
Well I was playing around with my phone, and was able to flash it with Telecom NZ firmware So im pretty sure if you need to get it fixed, you can just download the telecom NZ file thats in the same place, and follow my steps again, to get back to Telecoms firmware, Now time to get back to finishing my steps lol...
Thanks heaps for completing the steps, just got to work up the courage to do it now :S
The part where you said it seems bricked seems a little scary lol.
The drivers you linked are 32bit, did you run them on 64bit windows fine, or should I search for a 64bit version
Drivers Theyre the ones I used and Im on 64 bit
ICS 4.0.4 root
Hey there,
I'm trying to root my atrix 2 which is upgraded to the recent update ICS 4.0.4. I'm curious to know like, how much time it takes to root the device?
karthikreddy0430 said:
Hey there,
I'm trying to root my atrix 2 which is upgraded to the recent update ICS 4.0.4. I'm curious to know like, how much time it takes to root the device?
Click to expand...
Click to collapse
Ummm, the flashing process I have posted takes about 15-30 mins I would say... But thats with me scouring on how to do it, and not having a nicely formatted instructions to follow
Hey guys,
4.04 update is available for Telecom XT NZ network, for the ATrix2 MB865, System version 672.1.20.MB865.TNZ.en.NZ
I just got a one from Telecom with ICS !
tjfnz said:
Hey guys,
4.04 update is available for Telecom XT NZ network, for the ATrix2 MB865, System version 672.1.20.MB865.TNZ.en.NZ
I just got a one from Telecom with ICS !
Click to expand...
Click to collapse
Yep, i read that telecom are releasing updates sometime in december, so i guess they finally did it. Doesnt affect me though, im on jellybean
tjfnz said:
Hey guys,
4.04 update is available for Telecom XT NZ network, for the ATrix2 MB865, System version 672.1.20.MB865.TNZ.en.NZ
I just got a one from Telecom with ICS !
Click to expand...
Click to collapse
How did you get the update?my mate just got an Atrix 2 but no update is available
lokhor said:
How did you get the update?my mate just got an Atrix 2 but no update is available
Click to expand...
Click to collapse
Look on the side of this page: https://forums.motorola.com/pages/00add97d6c it tells that the MB865 will get it 4.0.4 sometime in december.
Here are the FXZ for Photon Q via Firmware Team:
Android 4.0.4 - Sprint US - 7.7.1Q-6_SPR-89_ASA-36 (No simlock)
asanti_c-user-4.0.4-7.7.1Q-6_SPR-89_ASA-36-42-release-keys-Sprint-US.xml.zip
Android 4.0.4 - Sprint US - 7.7.1Q-6_SPR-125_ASA-10 (No simlock)
asanti_c-user-4.0.4-7.7.1Q-6_SPR-125_ASA-10-11-release-keys-Sprint-US.xml.zip
Android 4.0.4 - Sprint US - 7.7.1Q-6_SPR-125_ASA-14 (No simlock)
asanti_c-user-4.0.4-7.7.1Q-6_SPR-125_ASA-14-15-release-keys-Sprint-US.xml.zip
Android 4.1.2 - Sprint US - 9.8.2Q-122_XT897_FFW-5 (No simlock)
asanti_c_sprint-user-4.1.2-9.8.2Q-122_XT897_FFW-5-6-release-keys-cid9.xml.zip
==================================================
Android 4.0.4 - Cellular US - 7.7.1Q-6_SPR-125_CSP-10 (No simlock)
asanti_c_cspire-user-4.0.4-7.7.1Q-6_SPR-125_CSP-10-10-release-keys-ACG-CS-US.xml.zip
Android 4.0.4 - Cellular US - 7.7.1Q-6_SPR-125_CSP-14 (No simlock)
asanti_c_cspire-user-4.0.4-7.7.1Q-6_SPR-125_CSP-14-14-release-keys-ACG-CS-US.xml.zip
Android 4.1.2 - Cellular US - 9.8.2Q-122_XT897_FFW-7 (No simlock)
asanti_c_cspire-user-4.1.2-9.8.2Q-122_XT897_FFW-7-8-release-keys-cid9.xml.zip
Download
NOTES
- use at least RSD Lite 6.1.5 (maybe 6.1.x will work too) or you get an error on flashing system.img.ext4
- you may have to open the zip and edit the xml, and delete the 2 lines "<step operation="getvar" var="max-download-size" />" if you get unknown command fastboot getvar max-download-size
- do not flash Sprint firmware to phone from Cellular US and vice versa unless you know what are you doing!!!
RSD Compatible?
Skrilax_CZ said:
Here are the FXZ for Photon Q via Firmware Team:
Sprint US 7.7.1Q-6_SPR-89_ASA-36
asanti_c-user-4.0.4-7.7.1Q-6_SPR-89_ASA-36-42-release-keys-Sprint-US.xml.zip
Sprint US 7.7.1Q-6_SPR-125_ASA-10
asanti_c-user-4.0.4-7.7.1Q-6_SPR-125_ASA-10-11-release-keys-Sprint-US.xml.zip
Cellular US 7.7.1Q-6_SPR-125_CSP-14
asanti_c_cspire-user-4.0.4-7.7.1Q-6_SPR-125_CSP-14-14-release-keys-ACG-CS-US.xml.zip
Download: http://sbf.droid-developers.org/asanti_c/list.php
Click to expand...
Click to collapse
asanti_c-user-4.0.4-7.7.1Q-6_SPR-125_ASA-10-11-release-keys-Sprint-US.xml.zip Failed Flashing Process at system.img. Also had to delete getvar from xml to even get that far. I don't know if this is RSD Lite compatible but that's what I tried using. Any suggestions on what to do next or even to learn what I need to know to continue would be awesome, thanks.
You can try using fastboot and flash manually.
Lookin into it.
Skrilax_CZ said:
You can try using fastboot and flash manually.
Click to expand...
Click to collapse
Thanks, idk how to flash system (or would I just flash this whole file?) in fastboot. Looking into that now, because "advanced tech support" at sprint doesn't know how to restore my data, lol.
EDIT: Works
I guess I just needed a newer RSD lite version 6.0 here: https://hotfile.com/dl/174582400/60ad26d/RSDLite_6.0.rar.html
I still had to remove the getvar commands from the .xml but phone took the flash finally! It's activating now. Thanks again Skrillax for this, hoping this firmware is more stable than the first update.:good:
patrickm823 said:
I guess I just needed a newer RSD lite version 6.0 here: https://hotfile.com/dl/174582400/60ad26d/RSDLite_6.0.rar.html
I still had to remove the getvar commands from the .xml but phone took the flash finally! It's activating now. Thanks again Skrillax for this, hoping this firmware is more stable than the first update.:good:
Click to expand...
Click to collapse
Anyone mind giving the cliff notes on *how* to fastboot the files manually? Will it work on stock recovery?
Added Sprint US 7.7.1Q-6_SPR-125_ASA-14.
Re: [01-23-2013]Photon Q FXZ
Does this restore stock recovery as well? If so it's definitely easier than restoring a stock nandroid and recovery.img and taking the ota update. My understanding is the latest fxz is stock asa14?
Sent from my XT897 using xda app-developers app
Yes, it is fully stock and independant on the current device state, so you can flash it, then flash recovery and then nandroid. You just might need to remove the "get var" fastboot commands from the xml in order to get it flashed.
Re: [01-23-2013]Photon Q FXZ
So this is similar to an SBF file where it restores your phone to stock if you want to start over new? Would it be wise to wipe everything before using it? (After a backup of course)
Sent from my XT897 using xda premium
Skrilax_CZ said:
Added Sprint US 7.7.1Q-6_SPR-125_ASA-14.
Click to expand...
Click to collapse
just a heads up to others i Flashed this one instead of doing the OTA and then i tried to flash one of the older versions and RSD Lite lite failed. on the phone fastboot screen said error firmware was not downgradeable
this helped me to unbrick mine after ota update.
thanks, fixed it with RSD lite latest version, and flasing worked good
I broke my device. Thanks for this so I can fix it maybe.
Rangerbry said:
just a heads up to others i Flashed this one instead of doing the OTA and then i tried to flash one of the older versions and RSD Lite lite failed. on the phone fastboot screen said error firmware was not downgradeable
Click to expand...
Click to collapse
so this means there is some kind of bootloader lock on downgrading from the latest firmware? maybe they did that so people can't go back and use Motofail2go or something? is your bootloader unlocked by the official method?
Does it matter which firmware you flash or does it have to be the one that was on the phone before? Got a failure message in RSD lite and im not sure if it was cuz of low device battery or wrong version. My phone was bought new and bricked on the December firmware, whichever that was.
If you have low battery, discharge it completely, then plug to charger and leave it be, so it doesn't try to boot when plugged in to the charger.
If you get failure message in RSD lite, read it
But you can just flash latest FW.
Sorry Im really hung over today didnt mean to geek out. Didnt realize I already posted here! Is flashing with RSD lite really as easy as it seems to unbrick a phone?
I honestly don't recall whether Photon Q charges in fastboot when connected via USB. However, if you leave it in fastboot until it discharges completely, and then plug it to a wall charger (!and leave it there be), it will start charging in "emergency mode" i.e without booting.
Does NOT charge in FastBoot mode. Might overheat if left in recovery after restore.
I just wanted to follow up and say this was a shockingly easy method of restoring a bricked device. Just 3 easy steps.
Hi guys. Not so long ago cspire PhQ came to my hands.
Bootloader locked.
Trying to power on - stuck on moto logo, then restarts and everything is repeated.
Tried to flash stock ICS and JB roms.
When flashing ICS phone does not like boot.img (says - No Downgrades).
When flashing JB fully , on the last rebooting it starts doing the same thing, so nothing changes....
Sprint stock roms do not even start flashing. On sbl1 - flashing failed.
Any suggestions guys?
You are using the RSD Lite application to flash the FXZ files I assume?
If yes, you should NOT grab the Sprint FXZ's... It states that pretty clearly in the OP.
For a proper downgrade, you have to remove some additional lines.
For the JB flash, that is odd - which version of RSD are you using?
arrrghhh said:
You are using the RSD Lite application to flash the FXZ files I assume?
If yes, you should NOT grab the Sprint FXZ's... It states that pretty clearly in the OP.
For a proper downgrade, you have to remove some additional lines.
For the JB flash, that is odd - which version of RSD are you using?
Click to expand...
Click to collapse
I use RSD Lite to flash whole stock roms from here http://sbf.droid-developers.org/asanti_c/list.php
RSD version 6.15
getvat + gpt strings were removed of course.
what else could help?
If there were no error messages when done. There might be hardware problems.
Sent from my XT897 using XDA Premium 4 mobile app
I put together a couple nice little Batch files for you guys. Tool is for windows only
This is what they can do for you
1. Relock a unlocked bootloader and complete wipe device back to android 4.4.2 along with fixing the Unlock logo
2. Full Restore to android version 4.4.2 including a full wipe
3. Full Restore to android version 4.4.2 NO WIPE
4. Flash Moto Logo to replace the unlock bootloader Logo
To run any of these scripts you must be in bootloader mode / Fastboot Mode
Power off Device
hold both volume up and down then power
hold all buttons for 3 seconds then release
this will put you in bootloader mode
Now run the script you want to run
check out this video of me using the scripts
Video
Link to the firmware tool can be found HERE
Link to Motorola Drivers needed are Here
Warning Use these at your own risk
Great job buddy
Sent from my XT1033 using Tapatalk
Doublepranks said:
Great job buddy
Sent from my XT1033 using Tapatalk
Click to expand...
Click to collapse
Thanks. I thought someone could use this
XT1034??? Plz!
swirly05 said:
XT1034??? Plz!
Click to expand...
Click to collapse
Just download your firmware and replace the the firmware I have in the zip with the XT1034 the batch files should work the same.
sent from my Galaxy Note 3 running HyperDrive.
-edited- working links
just a simple question,if you locked the bootloader can you unlocked it again later? thanks
Sent from my XT1034 using XDA Premium 4 mobile app
ryuben2k said:
just a simple question,if you locked the bootloader can you unlocked it again later? thanks
Sent from my XT1034 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes you can relock and unlock the bootloader with the same code you unlock it with the first time.
when you got the device the bootloader is status code 0 locked once unlocked it is status code 3 and relocked is status code 2.
now you can bounce between status code 2 and 3 locked and unlocked with the bootloader unlock code.
So if I wanted to completely restore my phone back to when I first got it out of the box, does this tool do that?
Would the "Restore US_retail_XT1032_KXB20.9-1.8-1.4_CFC" .bat work like this?
Because for some reason, all of my ringtones that came with the phone just disappeared and I wanted to get them back.
jman1234 said:
So if I wanted to completely restore my phone back to when I first got it out of the box, does this tool do that?
Would the "Restore US_retail_XT1032_KXB20.9-1.8-1.4_CFC" .bat work like this?
Because for some reason, all of my ringtones that came with the phone just disappeared and I wanted to get them back.
Click to expand...
Click to collapse
that bat file will restore and delete everything from the phone but you will keep the unlocked bootloader if you unlocked it
Tomsgt said:
Yes you can relock and unlock the bootloader with the same code you unlock it with the first time.
when you got the device the bootloader is status code 0 locked once unlocked it is status code 3 and relocked is status code 2.
now you can bounce between status code 2 and 3 locked and unlocked with the bootloader unlock code.
Click to expand...
Click to collapse
ok. so if i locked my phone back and turn on the phone, the unlocked bootloader warning will be gone? im planning to sell my phone to my friend. thank u
Sent from my XT1034 using XDA Premium 4 mobile app
Tomsgt said:
Just download your firmware and replace the the firmware I have in the zip with the XT1034 the batch files should work the same.
sent from my Galaxy Note 3 running HyperDrive.
Click to expand...
Click to collapse
How would I do this (replace the firmware) for XT1032 GB Retail version? I would need VERY basic instructions!! I have downloaded it to my laptop running Windows 7, it is - RETAIL-GB_4.4.2_KLB20.9-1.10-1.9_cid7_CFC_1FF_v5_SVC.xml.zip -
1 question please
I have the moto g 1033 version can i download my phoe's factory file and replace with the US zip file in your tool to flash my 1033 stock system???
What's the point of Unlocking the bootloader againi if your warranty is already voided
even if as a means for selling to other person he will get phone the already without warranty..
harisaduelite said:
I have the moto g 1033 version can i download my phoe's factory file and replace with the US zip file in your tool to flash my 1033 stock system???
Click to expand...
Click to collapse
yes that should work just fine
akhil17kr said:
What's the point of Unlocking the bootloader againi if your warranty is already voided
even if as a means for selling to other person he will get phone the already without warranty..
Click to expand...
Click to collapse
some people just want to go to stock 100% the person you sell the device to doesnt normal get the warranty any way
Tomsgt said:
some people just want to go to stock 100% the person you sell the device to doesnt normal get the warranty any way
Click to expand...
Click to collapse
So the people here rooting there phones doesn't love warranty or what ??
as no one is working on exploit or something that will allows us to doesn't lose our warranty with unlocking bootloader?
In the Netherlands, the retailer is responsible for warranty by law. They cannot simply forward me to the manufacturer. Additionally, consumer law dictates warranty cannot be void for manufacturing errors by a mere software mod. Therefore I don't care for those intimidating "your warranty is now void" claims.
Sent from my XT1032 using Tapatalk
I always get a fastboot.exe error when i run any of the scripts and it crashes, but it loads back up and still goes through the install but I get alot of errors the whole time. what am i doing wrong?
Problem with your script and going to stock for example with GB tesco roms is that in your script:
Code:
%fastboot% flash system system.img_sparsechunk[B][U]1[/U][/B]
%fastboot% flash system system.img_sparsechunk[B][U]2[/U][/B]
%fastboot% flash system system.img_sparsechunk[B][U]3[/U][/B]
And in packages of GB rom there are system.img_sparsechunk0, system.img_sparsechunk1, system.img_sparsechunk2.
So people be careful.
---------- Post added at 04:21 PM ---------- Previous post was at 04:00 PM ----------
jamsh said:
How would I do this (replace the firmware) for XT1032 GB Retail version? I would need VERY basic instructions!! I have downloaded it to my laptop running Windows 7, it is - RETAIL-GB_4.4.2_KLB20.9-1.10-1.9_cid7_CFC_1FF_v5_SVC.xml.zip -
Click to expand...
Click to collapse
All credits to Tomsgt
Download this: Here
Unzip it on your desktop.
Open the "Firmware restore lock and more 4.4.2" folder and then delete this files:
gpt.bin
motoboot.img
logo.bin
boot.img
recovery.img
system.img_sparsechunk1
system.img_sparsechunk2
system.img_sparsechunk3
NON-HLOS.bin
fsg.mbn
Open the "Restore US_retail_XT1032_KXB20.9-1.8-1.4_CFC.bat" with notepad and change this lines:
Code:
%fastboot% flash system system.img_sparsechunk1
%fastboot% flash system system.img_sparsechunk2
%fastboot% flash system system.img_sparsechunk3
to this:
Code:
%fastboot% flash system system.img_sparsechunk0
%fastboot% flash system system.img_sparsechunk1
%fastboot% flash system system.img_sparsechunk2
and save the file.
Download proper drivers and install them Here
Open "RETAIL-GB_4.4.2_KLB20.9-1.10-1.9_cid7_CFC_1FF_v5_SVC.xml.zip" and copy this files:
gpt.bin
motoboot.img
logo.bin
boot.img
recovery.img
system.img_sparsechunk0
system.img_sparsechunk1
system.img_sparsechunk2
NON-HLOS.bin
fsg.mbn
to "Firmware restore lock and more 4.4.2"
Power off Device
hold both volume up and down then power
hold all buttons for 3 seconds then release
this will put you in bootloader mode
connect your phone to the pc
Now run "Restore US_retail_XT1032_KXB20.9-1.8-1.4_CFC.bat"