Related
okay after reading a bit more and help from other users finally got this working and maybe itll be help to someone else
PHONE MUST BE ROOTED CHECK OUT THE ROOTING THREAD
AND DO THIS AT YOUR OWN RISK UNDERSTAND THE RISK OF OC
THE ARIA IS ALREADY PRETTY ZIPPY SO PERSONAL CHOICE
1. grab any rom cm6 or liberated, then go into the kernel thread and download the kernel pack
some people are reporting certain versions are breaking wifi,3g etc
i used oc768-v3.2 legend zip wifi working no issues plus this is sufficient for me
but if it doesnt work play around with diff kernels
2. boot into recovery mode vol down and power
3. flash your rom then flash the kernel pack and reboot
4. download and setcpu app and start OC
im not taking any credit for any of this but i wanna thank for everyone who worked on this
i just simply wanted to write this because i wanted to try this but i got alot of diff info
but after other users made a few key points decided to write this
anyone feel free to add to this and if i made any errors or whatever mods go ahead and change it
Read ,Search ,Read . I had no luck with the 3.5 kernels tho.
What you want is some hand holding it looks like.
I figured this all out for myself by reading the forum.....
but anyway I'll answer it in the foolish hope of no more people asking the same questions
1. download what files....? if your talking about roms i think youll know where to go after reading this post.
2. you can use whatever rom you like, the main two on this forum and as far as I know on the aria full stop are Liberated and Cyanogen Mod 6. Liberated is based on the stock aria rom so its pretty much what your used to with your stock aria (minus the AT&T rubbish plus a few added perks). Cyanogen Mod 6 is based on bare android so it doesn't have all the sense ui, it is also based on froyo which is the version above eclair (which is what is running on your base aria/ liberated rom). Do not ask which rom to use, it is up to personal preference you just have to try both and see which one you like.
3. you flash a kernel the same way you install a rom on your phone except instead of selecting the rom .zip file you select the kernel .zip file. You should first flash a rom and then afterwards flash the kernel. As ycode90 said some kernels don't work so just go through the process again and try another one, the 3.2 825 kernel was working on liberated for me so try that one.
All OC kernals broke wifi or mobile network on my buddies Aria, I left him with the stock kernal from CM6.
Sent from my T-Mobile G2 using XDA App
im running dumfuqs oc kernel v3.2 844, on cm6 v6.0.2.1 my wifi works and the wireless tethering works. it runs fast the only thing that doesnt work is my bluetooth
bkmo said:
What you want is some hand holding it looks like.
Click to expand...
Click to collapse
no sir thats not the case see how after some user input sheds new light
now i can head back to square one
f it if i get it working ill post a how to
overclock went great but it keeps crashing my swype keyboard and livewallpaper
did a nandroid restore and it went back to normal and reflashed the kernel and it did it again
Has been my exp. LWP and overclock do not play well together.
ycode90 said:
Has been my exp. LWP and overclock do not play well together.
Click to expand...
Click to collapse
Yup, it had been my experience that these OC kernels and *anything* that utilizes gpu sucks. There isn't a kernel for the aria at this time, and by using these kernels here you are increasing cpu performance at the expense of gpu performance. I don't believe its worth it at all just for a linpack number.
Yep patiently waiting for an ARIA kernel.
Working over clock:
http://forum.xda-developers.com/showthread.php?t=736019&page=33
, just need to get the latest nightly, 87 so that bluetooth, wifi, and network all works great.
Good Luck
I don't understand how to flash the kernel or rom. I see no options in Recovery. I'm on CM6.0.2.1 trying to use oc844-v3.5-legend-cm-2.6.29-signed. Help?
lasertits said:
I don't understand how to flash the kernel or rom. I see no options in Recovery. I'm on CM6.0.2.1 trying to use oc844-v3.5-legend-cm-2.6.29-signed. Help?
Click to expand...
Click to collapse
you install it the same way you installed the CM6 Rom. Put the kernel zip on your SD card and install the zip via Clockwork. Also anytime you flash a new Rom you will have to reflash the overclock kernel.
Hey guys, I've managed to achieve 1% battery steps on Froyo!
It has been tested in quite some Froyo roms by now, and it seems to work great! No battery drains or anything like that.
In order to obtain one percent battery steps, your rom/theme must give support to it. I've modified EphuNord (http://forum.xda-developers.com/showthread.php?t=1046027) Gingerbread theme to add support to it.
So, the only thing you need to do is to apply the battery_step.zip attached. It replaces your /system/lib/libandroid_servers.so. This library was extracted from Milestone FroyoMOD rom (http://forum.xda-developers.com/showthread.php?t=815595).
ATTENTION:
I recommend you installing 2nd-init (https://market.android.com/details?id=com.pedronveloso.sndinitdefy) and making a nandroid backup before applying this patch. If anything goes wrong (i.e. the library is not compatible with your rom), you'll be stuck in Motorola logo, so starting custom recovery on 2nd-init and restoring the nandroid backup is the easiest way to get your phone back!
Thanks 89luca89 for the library.
Thanks Ephumuris for the rom and original theme.
thnnx
Thanks! Working on S.Froyo II with custom BlueGingerbread framework.
Thanks! Also working on Froyo - Barebones v1.5.5
What modification needs for theme to use this mod?
Does it affect battery life?
here dosen`t work... CM7 RC0
the icon in screenshot show number inside baterry icon, and after im flash, my icon as same...
Jean-DrEaD said:
here dosen`t work... CM7 RC0
the icon in screenshot show number inside baterry icon, and after im flash, my icon as same...
Click to expand...
Click to collapse
You don't need this thing for CM7 ... this one is for Froyo ROMs.
CM7 already has it included.
@slph You must modify framework-res.apk in order to include icons for every battery step. You have also to change the xml that describes battery behavior.
Sent from my MB525 using XDA App
maniac103 said:
You don't need this thing for CM7 ... this one is for Froyo ROMs.
CM7 already has it included.
Click to expand...
Click to collapse
Hum.. i want that icon on CM7.. on UOT don`t have... but thanks
work fine for me
rom 3.4.2-164 stock
don't work with MIUI 1.6.3
thanks
Works on stock (deodexed) CEE Froyo (3.4.2-179) too!
i loved it on my froyo!!!
any way to get it working on a rooted 2.3.3/ 4.5.1-112 gingerbread???
thx
Katana1234 said:
i loved it on my froyo!!!
any way to get it working on a rooted 2.3.3/ 4.5.1-112 gingerbread???
Click to expand...
Click to collapse
Maybe you can try using CM7 system/lib/libandroid_servers.so. However, I cannot ensure it will work.
matheusvilela said:
Maybe you can try using CM7 system/lib/libandroid_servers.so. However, I cannot ensure it will work.
Click to expand...
Click to collapse
thx but i didn't work.
i know what i have to change in the libandroid_servers.so to but i don't know how.
no skills in de/recompiling the .so file
I have EphuNord rom, applied the theme you made, but didn't work. Since it works for others i guess i did something wrong. Now i'm stuck in a bootloop
But look on the bright side, now i have something to do tonight
matheusvilela said:
Hey guys, I've managed to achieve 1% battery steps on Froyo!
It has been tested in quite some Froyo roms by now, and it seems to work great! No battery drains or anything like that.
In order to obtain one percent battery steps, your rom/theme must give support to it. I've modified EphuNord (http://forum.xda-developers.com/showthread.php?t=1046027) Gingerbread theme to add support to it.
So, the only thing you need to do is to apply the battery_step.zip attached. It replaces your /system/lib/libandroid_servers.so. This library was extracted from Milestone FroyoMOD rom (http://forum.xda-developers.com/showthread.php?t=815595).
ATTENTION:
I recommend you installing 2nd-init (https://market.android.com/details?id=com.pedronveloso.sndinitdefy) and making a nandroid backup before applying this patch. If anything goes wrong (i.e. the library is not compatible with your rom), you'll be stuck in Motorola logo, so starting custom recovery on 2nd-init and restoring the nandroid backup is the easiest way to get your phone back!
Thanks 89luca89 for the library.
Thanks Ephumuris for the rom and original theme.
Click to expand...
Click to collapse
Not working.. Trie it on China unicom 2.10
please... post a model with battery from androidian theme!
or explain me what font and size used in... ^^
can i use this on a stock froyo 2.2.1? i have 3.4.3_11-Stock.UKTmobile_BLUR...
@shibabz03
Applying the patch might work, but make a nandroid backup before flashing it in case something goes wrong.
The theme, however, must be made for your ROM. The one in the first post just works with EphuNord and others nordic based ROMs.
@Jean-DrEaD
I've attached the images used for battery.
Can I just extract this *.so and replace the one in the official (but rooted) froyo?
i am hoping to put the KOB4LT R3V4MP3D 4.1 ICS theme on my skyrocket. i have cwmr touch installed and i am rooted. i was running superlite with that theme but wanted to try the new stock leak. it is running a lot smoother an with less problems then superlite did. so i want to know if i can put it on a stock rom without screwing everything up.
Yes you can flash random things like the toggle mod, but I'm not sure if every mod will work perfectly though. Trial and error then nandroid
Sent from my SAMSUNG-SGH-I727 using xda premium
steve0.adams said:
i am hoping to put the KOB4LT R3V4MP3D 4.1 ICS theme on my skyrocket. i have cwmr touch installed and i am rooted. i was running superlite with that theme but wanted to try the new stock leak. it is running a lot smoother an with less problems then superlite did. so i want to know if i can put it on a stock rom without screwing everything up.
Click to expand...
Click to collapse
well u shouldn't be mismatching framework-res.apk's, as each from chef puts different configs in there from my understanding, but u can flash the systemui.apk without issue I would think, as well as some of the inverted and aosp apps included in that theme
I am running rooted stock 2.3.6 ATT version. Can someone post the complete .zip file of stock 2.3.6 with the following modifications so that I can install it thru the CWM bootstrap.
1) Gas gauge 1% battery mod
2) Lockscreen as in victory rom
3) 3D signal bar
4) ICS icons for text messaging,browser,dialer...
I tried editing myself but ended up screwing my phone. thanks
rukesh18 said:
I am running rooted stock 2.3.6 ATT version. Can someone post the complete .zip file of stock 2.3.6 with the following modifications so that I can install it thru the CWM bootstrap.
1) Gas gauge 1% battery mod
2) Lockscreen as in victory rom
3) 3D signal bar
4) ICS icons for text messaging,browser,dialer...
I tried editing myself but ended up screwing my phone. thanks
Click to expand...
Click to collapse
i am currently working on a zip flashable deodexed rooted stock 2.3.6 based on the asia opps firmware.... other than that the only thing we have to work with is the 2.3.5 firmware for U.S. phones.... when i have some more luck with the updater script ill upload it and you can have a whack at it (along with anyone else that wants to dev from the zip)... heck maybe ill have a whack at it myself.....
rukesh18 said:
I am running rooted stock 2.3.6 ATT version. Can someone post the complete .zip file of stock 2.3.6 with the following modifications so that I can install it thru the CWM bootstrap.
1) Gas gauge 1% battery mod
2) Lockscreen as in victory rom
3) 3D signal bar
4) ICS icons for text messaging,browser,dialer...
I tried editing myself but ended up screwing my phone. thanks
Click to expand...
Click to collapse
So, you are odexed? Or deodexed? Can't get the 1% batt on odexed (yet)... all of the rest is do-able whether you are odexed or not.. i could help you, but not for a few days..
Sent from my mind using XDA
rukesh18 said:
I am running rooted stock 2.3.6 ATT version. Can someone post the complete .zip file of stock 2.3.6 with the following modifications so that I can install it thru the CWM bootstrap.
1) Gas gauge 1% battery mod
2) Lockscreen as in victory rom
3) 3D signal bar
4) ICS icons for text messaging,browser,dialer...
I tried editing myself but ended up screwing my phone. thanks
Click to expand...
Click to collapse
This is a nice request for someone besides yourself to do. Are you sure that's all you need? Would you like an appetizer or a drink with that order.
Sent from my MB865 using xda premium
tmease1 said:
This is a nice request for someone besides yourself to do. Are you sure that's all you need? Would you like an appetizer or a drink with that order.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
LOL
Sent from my mind using XDA
LOL
The End.
hi
2 years withe my love GALAXY S1 (I9000)
rom every 3days ,alot of changes,life is running.
now ,i want some silent ,somthing to be stable and to install all my games and programes.
so i buy 7.7 , i am just asking LQ1 or LQ2 or CM9 or CM10 or any rom else which is
stable ,speed ,less problems.
i know this is the main question in fourms but
i will install it just once ,and will not change it .
main usage is web browsing and reading(smal font in HC is realy problem)
any advice plz
Paranoid Android! :good:
my suggestion... stock deodexed tweaked rom...
all cm10 based roms are crap tbh... very laggy and buggy for me... no real jelly bean effect.... the indian stock was the best for me...
in i9000
JB smooth,nice and better performance but some times i feel it need more hardware ,more function need more hardware .
LQ1 is good enough with everything working so if it isn't broke don't fix it as the brickbug is quite worrying after so many cases.
Im using Tweaked stock beta 5, tried CM bulids, but there are missing stuff, and. small bugs.
I suppose Zeta 4.0 shoulbe same as the one im using, no bugs , smoot efortless expereience
alryhaan said:
in i9000
JB smooth,nice and better performance but some times i feel it need more hardware ,more function need more hardware .
Click to expand...
Click to collapse
I just did the same move i9000 to P6800 on Friday. CM9 was great on my sgs but I had one of the original SGSs with the slow chips and JB was usable but slow.
i like cm9, nice and fast, no issues, and the experirience between my cm9 phone and cm9 tablet are the same
I load stock ICS then Zeta4.0 then Dedraks kernal to get rid of debug crap . I use latetest hk.
Yes, the Indian one's the best DDLP5
But I could not find the Deodexed one...(so as to apply the V6 Supercharger).
Does anyone have the Deoxded one of DDLP5 ? Many thanks
i've made my own deodexed on ddlp5... do you want the full version of bloatware remove one...
edan1979 said:
i've made my own deodexed on ddlp5... do you want the full version of bloatware remove one...
Click to expand...
Click to collapse
Cool, yes please!, I'd like to download it.
Sorry for bothering, but could you provide both full and no-bloatware ?
For no-bloatware one, which apps do you remove: readers hub, games hub, social hub?
What about the s-dock that shortcuts popup memo/calc, etc?
Is it possible to install back those removed apps if I want them again?
Many thanks
found the full stock deodexed at this thread...
http://forum.xda-developers.com/showthread.php?t=1819429
i'm currently uploading the slim version... what's being removed... mostly all samsung software, but i retain the mini apps... oh... update some of the apps to the latest like maps/gmail/youtube and some others... add up flash player as its been pull out from playstore... oh the menu bar also has been edit to show battery percentage... i think that's all...
edan1979 said:
found the full stock deodexed at this thread...
http://forum.xda-developers.com/showthread.php?t=1819429
i'm currently uploading the slim version... what's being removed... mostly all samsung software, but i retain the mini apps... oh... update some of the apps to the latest like maps/gmail/youtube and some others... add up flash player as its been pull out from playstore... oh the menu bar also has been edit to show battery percentage... i think that's all...
Click to expand...
Click to collapse
yes I tried that one, I couldn't get kai's one to work, ddlp5
I can't recall exactly, but it was either boot-loop, or I could not get the /system to have as rw..
The same rw mounting problem goes with the LQ2 dedoxed one in the dev thread...
http://www.mediafire.com/?i8234n1wp30ikd0
this the slim version of ddl5
edan1979 said:
http://www.mediafire.com/?i8234n1wp30ikd0
this the slim version of ddl5
Click to expand...
Click to collapse
thanks, will update soon, btw, have you got the supercharger all working with this rom?
update1: hm, i get a boot loop, after the GT6800 logo, I dont even see sammy logo.
the rom was originally from the official ddlp5, before fleshing yours, I wiped everything including /system, /data, /sdcard, /cache
update2: supernoob here, but I see that yours dont have boot.img inside the zip? do I have to have a correct boot.img?
thanks
you dont need to wipe... what included in the zip is a replacement deodexed /system/app and system/frameworks... others will still use the stock ddl5 files... supercharger script is also working fine.
btw what cwm did you use... i'm using cwm 6.0.1.1...
the way that i install it.
1. flash ddlp5 using odin
2. flash cwm 6.0.1.1
3. copy the files to sd card
4. flash it with cwm
that's all... it never fail before...
So
Ddlp5 looks to be the best untill now.
Can I ask why people return from JB to ICS ?
Sent from my GT-I9000 using xda premium
alryhaan said:
So
Ddlp5 looks to be the best untill now.
Can I ask why people return from JB to ICS ?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I think the current JBs are all based on CMs, they are alright,.. but I personally think the official stocks are much better as far as the stability goes
(I'm kinda used to Samsung touchwiz and options, etc),
it's just that the official ones often have more bloats then needed (but again I might be wrong)
I've recently tried all JBs from Dev thread, i.e., JB v1.3, Nexness v2, paranoid v2.1, etc (all latest as of today)
But they all seemed to have some unknown or awkward errors, and not 'smooth'. and so not recommended for daily use (for me..)
Hoping for some the official JB release from samsung..
---------- Post added at 07:59 PM ---------- Previous post was at 07:45 PM ----------
edan1979 said:
you dont need to wipe... what included in the zip is a replacement deodexed /system/app and system/frameworks... others will still use the stock ddl5 files... supercharger script is also working fine.
btw what cwm did you use... i'm using cwm 6.0.1.1...
the way that i install it.
1. flash ddlp5 using odin
2. flash cwm 6.0.1.1
3. copy the files to sd card
4. flash it with cwm
that's all... it never fail before...
Click to expand...
Click to collapse
Right, It works good now, I'm now trying to apply SCv6, will update again, thanks
update: ok, scv6 applied, so far the best! thanks