[Q] Where can I download a stock Rom 2.2 for my galaxy s? - General Questions and Answers

Hi all, please can anybody help, I have bricked my galaxy s uk version so it only comes on to where the big S is on screen then the screen goes blank but the 2 bottom buttons are lit up and it vibrates every min or so. Now I have been reading and learning all weekend and am ok so far and am confident that after i get my jig off ebay in a few days (Cos the 3 button trick does not work) i can get in to download mode, then here is where i am a little unsure and would really appriciate some clear guidence on where to get the Stock rom from and what els do i need to download to use in odin? after downloading whatever I need to download what goes in to the fields on odin i have quoted below ?
1 PIT
2 PDA
3 PHONE
4 CSC
5 ETC
6 DUMP
I have watched a few very good vids on youtube but none clearly tell me what i need to download and what go in to each field in a none expert phone developpers language Please help?
Thanks Meurig.

mindiawl said:
Hi all, please can anybody help, I have bricked my galaxy s uk version so it only comes on to where the big S is on screen then the screen goes blank but the 2 bottom buttons are lit up and it vibrates every min or so. Now I have been reading and learning all weekend and am ok so far and am confident that after i get my jig off ebay in a few days (Cos the 3 button trick does not work) i can get in to download mode, then here is where i am a little unsure and would really appriciate some clear guidence on where to get the Stock rom from and what els do i need to download to use in odin? after downloading whatever I need to download what goes in to the fields on odin i have quoted below ?
1 PIT
2 PDA
3 PHONE
4 CSC
5 ETC
6 DUMP
I have watched a few very good vids on youtube but none clearly tell me what i need to download and what go in to each field in a none expert phone developpers language Please help?
Thanks Meurig.
Click to expand...
Click to collapse
Take a look at samfirmware.com. There you find anythik you need.

Thanks but what about the rest of the questions i asked? Can you help with them please? Thanks
Sent from my galaxy s 2

Related

[Q] i9000 bricked, where can i download new rom please?

Hi, where can i download a standard 2.1 rom to my computer please? I need it as I have bricked my galaxy s so need to reflash using odin.
Please help. Thanks
http://www.samfirmware.com/
Hi, thanks for your reply, but when I go to that website what do i download? Please see another thread i wrote earlier below.
Hi all, please can anybody help, I have bricked my galaxy s uk version so it only comes on to where the big S is on screen then the screen goes blank but the 2 bottom buttons are lit up and it vibrates every min or so. Now I have been reading and learning all weekend and am ok so far and am confident that after i get my jig off ebay in a few days (Cos the 3 button trick does not work) i can get in to download mode, then here is where i am a little unsure and would really appriciate some clear guidence on where to get the Stock rom from and what els do i need to download to use in odin? after downloading whatever I need to download what goes in to the fields on odin i have quoted below ?
1 PIT
2 PDA
3 PHONE
4 CSC
5 ETC
6 DUMP
I have watched a few very good vids on youtube but none clearly tell me what i need to download and what go in to each field in a none expert phone developpers language Please help?
Thanks Meurig.
Hi I'm currently at work be home in an hour or so ill send u the links and a guide how to reinstall the normal/ stock firmware.
NICK
Sent from my GT-I9000 using XDA App
mindiawl said:
Hi, thanks for your reply, but when I go to that website what do i download? Please see another thread i wrote earlier below.
Hi all, please can anybody help, I have bricked my galaxy s uk version so it only comes on to where the big S is on screen then the screen goes blank but the 2 bottom buttons are lit up and it vibrates every min or so. Now I have been reading and learning all weekend and am ok so far and am confident that after i get my jig off ebay in a few days (Cos the 3 button trick does not work) i can get in to download mode, then here is where i am a little unsure and would really appriciate some clear guidence on where to get the Stock rom from and what els do i need to download to use in odin? after downloading whatever I need to download what goes in to the fields on odin i have quoted below ?
1 PIT
2 PDA
3 PHONE
4 CSC
5 ETC
6 DUMP
I have watched a few very good vids on youtube but none clearly tell me what i need to download and what go in to each field in a none expert phone developpers language Please help?
Thanks Meurig.
Click to expand...
Click to collapse
Here is a guide you can follow:
1. Go to: http://www.samfirmware.com/
Go to Toolbox > Firmware > FW Android (and look for the firmware of your choice)
or (easy):
Download
ODIN 1.3
http://www.megaupload.com/?d=MADK0XTB
PIT (512) - file
Download: http://www.multiupload.com/I5WICSBFJ1
I9000XXJVO firmware (Android 2.3.3)
http://hotfile.com/dl/118194280/1ab7271/GT_I9000_XXJVO_XXJVO_OXAJVO.rar.html
2. Extract the zip (JVO-firmware) in a folder.
3. Open Odin as admin and boot phone into 'recovery mode':
- Connect your phone with the usb-cable and wait until Odin gives a green status and says 'connected'.
Mount the following files:
- PIT (512)
- PDA (from folder)
- PHONE (from folder)
- CSC (from folder)
Also check Re-Partition: ON
4. Press start and wait till your phone reboot properly (can take up too 10 minutes)
Good luck.
Wow thanks very much for that, i will try it tomorrow if hopefully my jig arrives. Thanks again and I'll let you know how I get on.
Sent from my galaxy s 2
No problem let me know if it worked

[Q] Tab does not boot onto recovery nor download mode.

I received a private message in regards to my question whether my tab is coma bricked or hard bricked. I explained to him that my tab does not work at all..no sign of life..i cant get into both recovery or download mode. HIS advice was to give it 4 hours. FOR ME, its an extremely anxious 4 hour wait..can someone please tell me whether or not this is a hard bricked? I hope to God it's just a coma brick ((((.
And in case you're wondering as to HOW this even happened lol. I use one sd card for both my tab and galaxy note..anyways, me being the unorganized noob that I am, I forgot that I had two JB BOOT LOADERS - one for my p5100 tab and the other for my gtn7000..and suprise, suprise, it was the wrong bootloader that I had flashed..
Plllleaase, someone helllp ( this is my brothers tab and he will knock me out when he finds out :'(
Thaanks
labelladon said:
I received a private message in regards to my question whether my tab is coma bricked or hard bricked. I explained to him that my tab does not work at all..no sign of life..i cant get into both recovery or download mode. HIS advice was to give it 4 hours. FOR ME, its an extremely anxious 4 hour wait..can someone please tell me whether or not this is a hard bricked? I hope to God it's just a coma brick ((((.
And in case you're wondering as to HOW this even happened lol. I use one sd card for both my tab and galaxy note..anyways, me being the unorganized noob that I am, I forgot that I had two JB BOOT LOADERS - one for my p5100 tab and the other for my gtn7000..and suprise, suprise, it was the wrong bootloader that I had flashed..
Plllleaase, someone helllp ( this is my brothers tab and he will knock me out when he finds out :'(
Thaanks
Click to expand...
Click to collapse
Then be ready to get knocked down!!!
Probably your tab is hard bricked because you flashed wrong bootloader
Anyways try following if something happens
1.put tab on charge and see it switch on
2.long press power button
3.continuously press and release power button
Best of luck
Sent from my C1505 using xda app-developers app

[Firmware] Unbrick & restore Galaxy Tab 3 7in SM-T210R

[Firmware] Galaxy Tab 3 7in SM-T210R
How to restore your Samsung Galaxy Tab 3 7in wifi tablet with odin and the stock firmware. Unbrick your device
Directions [NOTE] make sure your battery is fully charged before starting this process.
Download files listed to your computer
UPDATED LINK WITH ALL Firmware in one easy spot HERE
1. http://www.sammobile.com/firmwares/1/?model=SM-T210R&pcode=0#firmware or MK1 Firmware to fix screen flicker
2. ODIN 3.07.ZIP
3. Samsung drivers
extract the drivers and install.
extract odin 3.07 program to desktop
extract firmware to desktop
Enter download mode / odin mode on the tablet from a powered off state.
Press and hold power, home, and volume down. you will see a warning screen then press volume up to continue
Now the device is in download mode. plug in usb cable to computer and device and let the drivers install give it 3 minutes
run odin 3.07 and wait to see the com port connect.
Click on pda button in odin and find the firmware file you extracted to your desktop and select it
press start and wait for device to finish the flash and reboot.
Thats it you just restored the firmware on your device.
Link to samsung mobile firmware
http://www.sammobile.com/firmwares/1/?model=SM-T210R&pcode=0#firmware
How to video linked here VIDEO
Thanks for the info. Is there already a way of how to reset the flash counter ?
batman08 said:
Thanks for the info. Is there already a way of how to reset the flash counter ?
Click to expand...
Click to collapse
No sure if Triangle away app will work on this device yet. I really dont care if it shows flash counts it doesnt bother me.
Question, does this remove cwm?
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
meber said:
Question, does this remove cwm?
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It should restore the entire device even stock recovery
Video added to OP
hi
is the firmwere contains or supports the arabic language ?
if not how do i find a firmwere that supports arabic language
tab 3 ( sm-t210r )
thak you
i did this but my galaxy tab is like all colored flicked like green blue red etc...keeps flickering...i just bought this so i know its not a hardware problem, because it was fine til i rooted....now its all like shaky and flickery
Thank you
I am glad I found this I just got mine a week ago and was in a hurry to root it so I could play around and in doing so I spaced off making a backup. So again thanks your a lifesaver. Can do the updates then back it up before I root it again. You happen to know of any good roms for this tablet?
it didint work for me i get a block of yellow text and it says factory mode and alot of other stuff
my tab 3 t210 doesnt let me choose any usb mode MTP or PTP. and doesnt let me uncheck Developer options -> usb debugging. When i try to do these, my tab restarts and panic mode comes. would this subject solve my problem?
tuncell said:
my tab 3 t210 doesnt let me choose any usb mode MTP or PTP. and doesnt let me uncheck Developer options -> usb debugging. When i try to do these, my tab restarts and panic mode comes. would this subject solve my problem?
Click to expand...
Click to collapse
yes I think it would
is the latest version for the galaxy tab 3 t210r wifi only for the US the MK1 listed as unknown on http://www.sammobile.com/firmwares/1/?model=SM-T210R&pcode=XAC ??
does this overwrite recovery?
if so can you still install philz recovery from http://forum.xda-developers.com/showthread.php?t=2468441 ??
also will the root method work from http://forum.xda-developers.com/showthread.php?t=2433853 ??
biggyhead said:
i did this but my galaxy tab is like all colored flicked like green blue red etc...keeps flickering...i just bought this so i know its not a hardware problem, because it was fine til i rooted....now its all like shaky and flickery
Click to expand...
Click to collapse
After I rooted my Samsung Galaxy Tab 3 7" using prerooted.tar.md5, I had the same issue. The screen kept flickering and now I want to unroot to go back to the original manufacturing setting. I just flashed this firmware and it restored to the original condition except the flickering problem still exists. Please help.
unbrick my galaxy tab 3 10.1 P5200
First I greatly appreciate this forum; you may actually be able to help - - - -
Apparently I may have turned my Galaxy Tab 3 10.1 P5200 into a brick; my battery was below 50%, and it asked me if I wanted to update my IAP? - -somewhat of a novice in this regards, said yes, immediately asked me to connect my charger, after I did the power was not charging and continued to drop. Now it will not charge at all - - -no battery prompt, no screen, no nothing, went completely dead. My question is how can I restore power to my TAB 3? I have tried most of the suggestions from google sites; and an IT friend of mine indicated this sounds like a firmware issue and I would have to send to manufacture - - -I purchased it 1 1/2 months ago brand new; I LOVE MY GALAXY TAB 3; currently in a war zone and it would take forever to send back and get back; can someone give me some hope on restoring power so I do not have to send back . . .Thanks to all of you, be safe.
Horatio03 said:
First I greatly appreciate this forum; you may actually be able to help - - - -
Apparently I may have turned my Galaxy Tab 3 10.1 P5200 into a brick; my battery was below 50%, and it asked me if I wanted to update my IAP? - -somewhat of a novice in this regards, said yes, immediately asked me to connect my charger, after I did the power was not charging and continued to drop. Now it will not charge at all - - -no battery prompt, no screen, no nothing, went completely dead. My question is how can I restore power to my TAB 3? I have tried most of the suggestions from google sites; and an IT friend of mine indicated this sounds like a firmware issue and I would have to send to manufacture - - -I purchased it 1 1/2 months ago brand new; I LOVE MY GALAXY TAB 3; currently in a war zone and it would take forever to send back and get back; can someone give me some hope on restoring power so I do not have to send back . . .Thanks to all of you, be safe.
Click to expand...
Click to collapse
ok, here's the update, I have in fact been told it IS as a result of the firmware . . . . is there a 3rd party or download available that can be used to fix the firmware issue . ..if known please, please, please, give the link - - -thank you for your attention
screen flickers
when i restore my screen flickers and shakes and changes colors randomly
does it work for my : samsung galaxy tab 3, 7 inch SM-T210 ?
Bad firmware image
The same thing was happening to me so i went to sammobile to find a good copy of the firmware and sure enough that was it. Took me 12 friggin hours and i think i cried a little, but now no more flickering.
Sorry im new so i cant submit the link but its the first result in the list when you search for firmware on sammobile.
samsong313 said:
The same thing was happening to me so i went to sammobile to find a good copy of the firmware and sure enough that was it. Took me 12 friggin hours and i think i cried a little, but now no more flickering.
Sorry im new so i cant submit the link but its the first result in the list when you search for firmware on sammobile.
Click to expand...
Click to collapse
Thread updated. when I made this thread the device it was on a different firmware and it must not work anymore so links in OP are updated get the firmware from samsung mobile

Galaxy tab 2 unroot and update latest firmware help

Hi all,
new to this forum and before continuing i will say to admins and moderators i have read the rules but i do appolgise if this question has previously been asked and answered but i have looked everywhere to answer this question through out the net and here but just cant seem to find the answer i look for for this tablet..?
My question is probably simple to some..
basically i have had a galaxy tab 2 7" GT-P3110 for some time now and i rooted it awhile ago with out any problems..
now after awhile i have now decided i want to update the tablet.. to the latest firmware. now we all know that we cant do this simple because it says device status custom or modified..
so i have tried many things now and the devise is reset but still on custom..
can anyone please tell me the way to basically reset this so i can update it?
i have unrooted it via supersu and reset it via factory reset..
i have tried to update via kies but no joy..
i have downloaded odin but have not got a clue where to get a official firmware.. and not sure if im doing it the right way or heading the right way.. can anyone help ?
regards mogs..
n1mogs said:
Hi all,
new to this forum and before continuing i will say to admins and moderators i have read the rules but i do appolgise if this question has previously been asked and answered but i have looked everywhere to answer this question through out the net and here but just cant seem to find the answer i look for for this tablet..?
My question is probably simple to some..
basically i have had a galaxy tab 2 7" GT-P3110 for some time now and i rooted it awhile ago with out any problems..
now after awhile i have now decided i want to update the tablet.. to the latest firmware. now we all know that we cant do this simple because it says device status custom or modified..
so i have tried many things now and the devise is reset but still on custom..
can anyone please tell me the way to basically reset this so i can update it?
i have unrooted it via supersu and reset it via factory reset..
i have tried to update via kies but no joy..
i have downloaded odin but have not got a clue where to get a official firmware.. and not sure if im doing it the right way or heading the right way.. can anyone help ?
regards mogs..
Click to expand...
Click to collapse
Follow these steps :
1) First download Samsung firmware from GT-P3110 Firmware
2) Download the P3110 firmware based on your region or from any region but you need to wipe/cache reset in case you are going to flash from the region you are not residing.
3) Extract the firmware using winrar,winzip or 7zip,you will get a files with tar.md5 extension..
4) Open odin,please see only these options are checked. Auto-reboot and F.Reset Time,,plese uncheck all other options.
5) click on PDA and select the firmware you have got after extraction
6) Now click on start.
7) you should get a message in the left bottom panel saying "Successful".
8) your tablet will restart.
9) switch it off by pressing Power off button
10) Now immediately press Power button+volume up button for few seconds until you see samsung boot logo and leave power button but keep on pressing volume up button until you see android logo i.e recovery mode.
11) Wipe factory reset from menu and restart.
Enjoy Buddy.
:laugh::laugh::laugh::laugh::laugh:
Update
Hi thanks for your reply and its much appreciated. after posting this last night i ended up going with what i was thinking,
which was pretty much the same as what you suggested. i now have managed to update the device and now rerooted
with not doing things like this ona regular basis its a bit of a ball ache trying to remember how or to suss things out without bricking something
but again thanks for you reply..
however do you know much about sony xperia z? i have one and was wondering if you or anyone else knows of a way to screen mirror movies from it to xbox? Aka on that device "throw" i have managed to setup a media server but wanted the throw to work or screen mirroring?
Hi,
Am totally new on this platform and looking for a solution to my rooted Samsung Tab 2. I wish to update it but keep on getting your device is modified prompt. Kindly assist.

GT=N8000 is not booting , stuck at downloading mode

hi
i am trying to get this thing on , but it keep showing me "Samsung Galaxy Note 10.1" screen , nothing else
tried to hard reset , so i pressed power+ vol up and asked me to restart or continue
so i continue , and i am stuck at a creen showing me android logo with "Downloading... do not turn off target!!"
its been like this for 4-5 hours
there is something written in the upper left corner
ODIN MODE
product name : GT-N8000
custom binary download : No
current binary : Samsung official
system status : Official
any help please ?
Be more spesific. What was the last thing you've done before that issue?
Btw, maybe it's time to use ODIN and install some rom. There are plenty of "flashing" guides in this forum and on internet. Please feel free to google: "how to flash on n8000 with ODIN". If you have any more trouble, question or something like it feel free to ask. Just be sure you mentioned me in your question so I can now there is a question that asked to me.
Have a nice day.
Edit: I found my answer too hard to understand so here is some hints:
You should search for "how to use odin".
You should download a firmware that corresponds to your tablet. (THIS IS IMPORTANT. IF YOU WON'T BE CAREFUL YOU CAN DAMAGE YOUR DEVICE)
There are plenty of guides that explains how to flash a firmware to a samsung phone. Don't worry, that way is effective for almost every samsung device (except for the new ones) and will be succesfull for your n8000 too!
furkey said:
Be more spesific. What was the last thing you've done before that issue?
Btw, maybe it's time to use ODIN and install some rom. There are plenty of "flashing" guides in this forum and on internet. Please feel free to google: "how to flash on n8000 with ODIN". If you have any more trouble, question or something like it feel free to ask. Just be sure you mentioned me in your question so I can now there is a question that asked to me.
Have a nice day.
Edit: I found my answer too hard to understand so here is some hints:
You should search for "how to use odin".
You should download a firmware that corresponds to your tablet. (THIS IS IMPORTANT. IF YOU WON'T BE CAREFUL YOU CAN DAMAGE YOUR DEVICE)
There are plenty of guides that explains how to flash a firmware to a samsung phone. Don't worry, that way is effective for almost every samsung device (except for the new ones) and will be succesfull for your n8000 too!
Click to expand...
Click to collapse
the tablet is not mine , my niece was using it
it was running good until several days and stopped working
when i go to download mode , it keep restarting for ever
i went to some local shop in my area and they said they can't fix it ( maybe its a hardware issue ? )
If there is a boot loop it is more likely being a software issue but I was wrong before too. So did you tried to flash a rom?
Sent from my D6503 using Tapatalk
furkey said:
If there is a boot loop it is more likely being a software issue but I was wrong before too. So did you tried to flash a rom?
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
no , i didn't tried to flash it
my PC wont recognize it
aos10 said:
no , i didn't tried to flash it
my PC wont recognize it
Click to expand...
Click to collapse
Try to install kies it will install drivers for you
Sent from my D6503 using Tapatalk
furkey said:
Try to install kies it will install drivers for you
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
installed kies , but the logo keep running on my desktop
ok , now my niece told me there is some important files and photos on it
how to restore those files without formatting ?
i can't even access to the device , and no microSD card
Just install the firmware. That's the only way you can open up your files with the resources you have. If it's that important, I strongly suggest you to go to a Samsung service and tell them your story. If you want to do it yourself, search for: installing custom recovery, installing rom. When you switch between different roms you don't have to format your data but I can't remember the case with the Odin.
Sent from my D6503 using Tapatalk
Hi, i have the same problem.
I have a galaxy note 10.1 2013. It originally had ics. I updated my software in the middle of this year.
Today, my tab worked fine, as it usually, does. I placed it in my bag at 5:30 pm after playing and surfing the internet. At 11pm, i took it out and it was a bit hot and it seemed to be stuck at the screen where it says "samsung galaxy note 10.1".
I tried to restart my tab but it still remains stuck in the same screen. When i plugged it in, it shows that im charging. But when i start it up, its still stuck in the same screen.
When i pressed the power button and the volume up button, it gets to this screen which says
Warning!! (Blahblah something about custom os blahblah) volume up: continue volume down: cancel(restart phone)
What do i do? I didnt do anything weird or different today than i would have any other day.
Please, i need your help. Thank you!
Sent from my GT-I9505 using XDA Free mobile app
Sent from my GT-I9505 using XDA Free mobile app

Categories

Resources