Related
When flashes go wrong things can get bad.with the vibrant I just odined to stock...through download load. Will we get something similiar for the greatest smartphone ever LG g2x
Luthien1 said:
When flashes go wrong things can get bad.with the vibrant I just odined to stock...through download load. Will we get something similiar for the greatest smartphone ever LG g2x
Click to expand...
Click to collapse
NV Flash
its not the same. odin was a backup in case you couldnt even get into recovery, so there was download mode as a failsafe....which was through odin.. there has to be something like this available... anyone know.. or are we sol if we mess up bad
Im wondering this as well...my friend flashed a rom on the G2x and the wifi is broken. Rom manager won't flash into recovery. Used my Sim card which has internet but the phone won't recognize the internet. Tried the power+ volume buttons on boot up but nothing happens. Any idea on how to get back to stock? Rom is eagle's blood
You would need to flash CWM through NVflash
ROM manager will not flash CWM, it looks like it did but is actually a fake flash. That's why you need to do it through nv flash.
Sent From My G2x EB 1.07
Yes. You flash back to stock with the KDZ file and the KD flasher program.
Sent from my LG-P999 using Tapatalk
downloaded nvflash and drivers, have usb debug mode on but when i do anything on nvflash it says no usb connected?
nvm got everything done thanks a lot!
I believe that there's the program used to flash KDZ files, I guess that could restore EVERYTHING back to stock.
moshe22 said:
You would need to flash CWM through NVflash
ROM manager will not flash CWM, it looks like it did but is actually a fake flash. That's why you need to do it through nv flash.
Sent From My G2x EB 1.07
Click to expand...
Click to collapse
Koush and Cyanogen said ROM Manager is not doing a fake flash. After flashing the rom you have to immediately boot into recovery using rom manager. It them flashes the new recovery right after boot. The recovery partition is not available when the phone is in normal mode. If you don't do an immediate boot into recovery through ROM Manager then the recovery is not properly flashed. If you have updated to GB then the first time you must do the NVFlash method as there is no way to root the phone any other way at this time.
jboxer said:
Koush and Cyanogen said ROM Manager is not doing a fake flash. After flashing the rom you have to immediately boot into recovery using rom manager. It them flashes the new recovery right after boot. The recovery partition is not available when the phone is in normal mode. If you don't do an immediate boot into recovery through ROM Manager then the recovery is not properly flashed. If you have updated to GB then the first time you must do the NVFlash method as there is no way to root the phone any other way at this time.
Click to expand...
Click to collapse
It is fake in the sense that no matter what you do it isn't on the actual recovery partition and if the phone goes to hell in a handbasket then you have to flash one through NVFLASH anyways. Koush just happens to have a vested interest in people using Rom Manager.
Yes, STAY THE HELL AWAY FROM ROM MANAGER. Seriously, you're just asking for trouble.
I use rom manager all the time. It works great for downloading and flashing roms on the fly... but just NVFlash first.
NVFlash takes like 3.5 seconds and your done. Nandroid backup and your good.
Then either download Rom manager or manually download and copy it to your SD card. Very very simple. Easiest phone ever to get going. You don't even need to worry about rooting first.
You'll gain root after flashing s custom rom. MIUI is my choice right now. CM7 is having problems after they merged the LG GB source.
MIUI 8.19 is found in the rom forums. Weapon is also nice but lacks some extras I'm used to.
LG G2x - 2.3.5 MIUI Love
Asus TF - Custom 3.2
I rooted according the directions found here: http://www.droidfiles.us/nexus-s-4g/root-nexus-s-4g/ after getting a new Nexus S 4G.
Even after locking the bootloader. It goes to the Android-with-box then to the Exclaimation-point-inside triangle. When I volume-up and power-button from that screen, an "Android Recovery <3e>" comes up...
Does anyone know what might be going on? And how do I get my custom recovery to stick?
Well, that's my post, so ill try to help. First, and don't take this the wrong way, but did you follow those instructions to a T? When you boot into bootloader, your pushing CWM to you phone with the fastboot command?
Sent from my Nexus S 4G using XDA App
mikeyinid said:
Well, that's my post, so ill try to help. First, and don't take this the wrong way, but did you follow those instructions to a T? When you boot into bootloader, your pushing CWM to you phone with the fastboot command?
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
No offense taken...it's a valid questions since humans have trouble following directions.
To answer your Q, yes, I followed it to a tee. I'm going to retry now...from scratch. Gonna load the stock imgs and go from the beginning...
TonyArmstrong said:
No offense taken...it's a valid questions since humans have trouble following directions.
To answer your Q, yes, I followed it to a tee. I'm going to retry now...from scratch. Gonna load the stock imgs and go from the beginning...
Click to expand...
Click to collapse
Apparently alot of people have this issue, me included. I seen some posts about using root explorer to change the name of the recovery image if it shows up in system /ext. Sounds crazy but I hear it doesn't show up on all phone's. IV come to terms with having to fastboot every time I flash but I'd love to see a fix. Have you tried Amons recovery?
TonyArmstrong said:
No offense taken...it's a valid questions since humans have trouble following directions.
To answer your Q, yes, I followed it to a tee. I'm going to retry now...from scratch. Gonna load the stock imgs and go from the beginning...
Click to expand...
Click to collapse
Have you flashed recovery through Rommanager when your phone boots up?
You have to flash a non-stock kernel, the recovery gets overwritten on reboot. So if you flash CWM and reboot without flashing a custom kernel you will be back to stock recovery.
Edit: oops maybe I was wrong lol, maybe it isnt the kernel. im assuming you flashed the recovery in fastboot?
mbh87 said:
You have to flash a non-stock kernel, the recovery gets overwritten on reboot. So if you flash CWM and reboot without flashing a custom kernel you will be back to stock recovery.
Edit: oops maybe I was wrong lol, maybe it isnt the kernel. im assuming you flashed the recovery in fastboot?
Click to expand...
Click to collapse
No, I dont think your wrong bro. It makes sense. Ill test your theory soon.
Tony, when you push CWM, are you able to boot into recovery by hitting volume down twice to recovery and hitting power? If so, I suggest you flash this ROM. Its stock rooted and you will not have problems with CWM sticking. You dont even have to wipe to flash it...
I've read on some methods for rooting that there is a file /system/etc/install-recovery.sh (or something like that, should be able to find it by mounting system in recovery and adb shell ls /system/etc then using adb shell rm -r /system/etc/install-recovery.sh).
Though after I fastboot flashed the recovery, booted into recovery, did a nandroid, I formatted /system before I flashed CM7, so that would've killed the file anyways.
david1171 said:
I've read on some methods for rooting that there is a file /system/etc/install-recovery.sh (or something like that, should be able to find it by mounting system in recovery and adb shell ls /system/etc then using adb shell rm -r /system/etc/install-recovery.sh).
Though after I fastboot flashed the recovery, booted into recovery, did a nandroid, I formatted /system before I flashed CM7, so that would've killed the file anyways.
Click to expand...
Click to collapse
I just had CWM, never had any issues. Im not sure what dictates whether that file is there or not. Im guessing that since tony is so quiet though he got it figured out..
whats amazing is i dont have this script and its one of the things holding the one click up :x
also its part of init.rc so technically a new kernel would.. in theory wipe that out...
mikeyinid said:
Have you flashed recovery through Rommanager when your phone boots up?
Click to expand...
Click to collapse
I did flash CWM through Rom Manager. That didn't work the first few times. It stalled...
mikeyinid said:
Tony, when you push CWM, are you able to boot into recovery by hitting volume down twice to recovery and hitting power? If so, I suggest you flash this ROM. Its stock rooted and you will not have problems with CWM sticking. You dont even have to wipe to flash it...
Click to expand...
Click to collapse
I got it to stick -- or at least i thought I had it. I followed the initial instructions provided in a previous thread. And per the instructions, I download Rom Manager and I installed CWM through it (again).
I'm going to wipe my phone fully -- reinstall the base 2.3.4 with the the stock recovery, via the IMG files for GRJ22 and start over...See what happens then.
Wait, I'm confused. Why would you flash stock images when your already stock? If you follow the instructions in the link you posted in the op there is no reason you shouldn't be rooted. Have you actually even booted into recovery?
TonyArmstrong said:
I got it to stick -- or at least i thought I had it. I followed the initial instructions provided in a previous thread. And per the instructions, I download Rom Manager and I installed CWM through it (again).
I'm going to wipe my phone fully -- reinstall the base 2.3.4 with the the stock recovery, via the IMG files for GRJ22 and start over...See what happens then.
Click to expand...
Click to collapse
Sent from my Nexus S 4G using XDA App
I realllyyy don't suggest flashing a recovery with rom manager. I'm not bashing ROM Manager, I'm a paid user, but the way that it flashes recoveries is unsafe. I've had it almost brick my Evo and I've seen it brick other phones.
Just use fastboot... if you can't get that working, you probably shouldn't be messing with the phone.
mikeyinid said:
Wait, I'm confused. Why would you flash stock images when your already stock? If you follow the instructions in the link you posted in the op there is no reason you shouldn't be rooted. Have you actually even booted into recovery?
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
I'm rooted successfully. I feel more comfortable (with recovery acting flaky) with unrooting and starting over from scratch...
Call me kooky, but a bone-stock unrooted phone with no user data, no nothing, is how I got it, so why not return it to that state and start over. That's the only way I know to insure that whatever I do is not influenced by any data, bad file permissions, etc. that could hose rooting and installing recovery.
TonyArmstrong said:
I'm rooted successfully. I feel more comfortable (with recovery acting flaky) with unrooting and starting over from scratch...
Call me kooky, but a bone-stock unrooted phone with no user data, no nothing, is how I got it, so why not return it to that state and start over. That's the only way I know to insure that whatever I do is not influenced by any data, bad file permissions, etc. that could hose rooting and installing recovery.
Click to expand...
Click to collapse
OCD, I know the feeling lol. What got it to stick?
derekwilkinson said:
I realllyyy don't suggest flashing a recovery with rom manager. I'm not bashing ROM Manager, I'm a paid user, but the way that it flashes recoveries is unsafe. I've had it almost brick my Evo and I've seen it brick other phones.
Just use fastboot... if you can't get that working, you probably shouldn't be messing with the phone.
Click to expand...
Click to collapse
I used fastboot to install CWM initially (fastboot flash recovery recovery-xxxxx.zip -- can't remember the filename right now). The directions for rooting the NS4G state explicitly to use ROM Manager to flash the recovery to "make sure it sticks" after initially pushing it to the phone via fastboot.
It's obviously a hack, but apparently it works more often than it fails.
I'm a paid user of ROM Manager as well. I have to admit, it was fine to flash Amon Ra to my Evo. Since I'm new(er) to the NS4G, I'm going to defer to those with more expertise and follow the directions given.
TonyArmstrong said:
I used fastboot to install CWM initially (fastboot flash recovery recovery-xxxxx.zip -- can't remember the filename right now). The directions for rooting the NS4G state explicitly to use ROM Manager to flash the recovery to "make sure it sticks" after initially pushing it to the phone via fastboot.
It's obviously a hack, but apparently it works more often than it fails.
I'm a paid user of ROM Manager as well. I have to admit, it was fine to flash Amon Ra to my Evo. Since I'm new(er) to the NS4G, I'm going to defer to those with more expertise and follow the directions given.
Click to expand...
Click to collapse
well the "make sure it sticks" flashing with rom manager doesn't make any sense. the only way the recovery would be overwritten is if the ROM you flash over writes it or in fastboot
mikeyinid said:
OCD, I know the feeling lol. What got it to stick?
Click to expand...
Click to collapse
Yeah, I'm very anal when it comes to this kind of stuff...I was a developer for a little bit (Java middleware, then on to the front-end stuff) where regression testing was important. Sometimes, it's best to reload things piece by piece to see what breaks what. Then go from there.
I haven't gotten it to stick yet; gonna get some sleep and start over tomorrow. I used fastboot to push the stock boot, bootloader, system, recovery, and userdata IMGs a moment ago, and the phone is back to bone stock.
Hi all, hope you can help. I installed clockworkmod recovery onto my wife's captivate, and now it won't boot - it's stuck at the "galaxy-S" screen.....I can get it into the YELLOW TRIANGLE screen and once managed to get it into the clockworkmod menu screen.
I believe the phone has android 2.3, not 2.2 on it and this might have been my mistake. The entry point into the kernel is likely different...
how can i fix this? do i need to remove clockworkmod and go back to the stock bootloader? The phone is not rooted, yet (that was the next step).
I haven't been able to find anything in the forums about people that have done (the stupid thing that I did) and installed clockworkmod on a 2.3 phone.
Thanks.
How exactly did you flash cwm? You shouldn't even be able to cause if 3e recovery signature verification?
If you can get to the yellow android screen, that's download mode. You're actually in a good place right now.
To fix where you are, take a look at the development section - there's a post about One-click stock packages. If you're sure she was on Gingerbread, grab one of the non-bootloader Gingerbread stock packages and flash that from download mode.
If you're not sure, I would suggest grabbing one of the Gingerbread stock packages with bootloaders (just to make sure).
In either case, see if you can find a one-click package with ClockworkMod Recovery baked into the kernel (it should say on the post which ones have it). That way you can flash what you want right out of the gate.
thanks. i am quite sure it has gingerbread. the person i bought it from said they did a kies update to 2.3.
i was following the instructions from the cyanogenmod wiki for the captivate: hxxp://wiki.cyanogenmod.com/wiki/Samsung_Captivate:_Full_Update_Guide
after it finished installing the "clockworkmod recovery" i got into this bind. are those instructions for froyo only?
If you followed the instructions about flashing the speedmod kernel, that's where it's hanging. You've got a froyo kernel with a GB rom. Not a big deal, but Android isn't happy about it. Flash a stock GB package, or find a GB kernel with CWM (like boog's) and flash that and you should be ok.
thanks. do i do this using ODIN or heimdall? I installed CWM using heimdall, and in my frantic reading i thought i saw something about installing stock bootloader/rom packages with ODIN after installing CWM could brick it? Or did I misread that?
dolhop said:
thanks. do i do this using ODIN or heimdall? I installed CWM using heimdall, and in my frantic reading i thought i saw something about installing stock bootloader/rom packages with ODIN after installing CWM could brick it? Or did I misread that?
Click to expand...
Click to collapse
Using heimdall is fine (it's also my personal preference between the two, but either will work).
With where you're at, you really shouldn't need to flash any bootloaders. That's pretty much the only area where there is a real risk of hard bricking the phone.
Since Heimdall worked for you once, I'd suggest grabbing the Heimdall one-click I made that's in my signature. You don't need to open it in Heimdall - just download, double-click it, and let it get ready to run. Then connect the phone in download mode and click "flash". You'll have the stock GB rom, with Boog's kernel and CWM all ready to go. You can then flash CM7 from recovery there (you'll probably have to flash it twice, though).
On a side note - flashing stock will wipe your apps. I'm assuming you backed everything up before this. If not, you might need to try and just flash a kernel first, do your backups, then go from there.
(Should you want to do that, go here, grab the one from the "Here is the odin flashable version flash it first if your on stock: Link Mirror" set of links, and then flash that in Heimdall.)
wow, thanks guys, i can breathe easier now. jmtheiss, i got it reflashed to UCKH3 using your one-click package (though now it is AT&T rather than rogers, but i really don't care as long as it works!).
does the one-click root application work with 2.3.4? or is there a more-preferred way to root it now?
Again, thanks so much for the assistance people!
In theory, you should already be rooted (I believe boog's kernel, which was in my one-click, is rooted). If not, go to the bottom of boog's 1st post, and grab the KH3 zip file. Flash that in CWM, and you'll have root permissions.
Or, if you're flashing to CM7, you can just do it from recovery as you are right now. I know from personal experience it works.
thanks everyone. it all worked, and all is good. wife is not an angrybird anymore
dolhop said:
thanks everyone. it all worked, and all is good. wife is not an angrybird anymore
Click to expand...
Click to collapse
Glad to hear that she's not flying over your house shooting explosive eggs. Always a turn for the better.
Had the same problem once before, odin fixed it aswell
Hello everyone,
I just bought a Verizon Galaxy S3 and I am in the process of rooting it. Im kinda freaking out because things really arent going that well for me. So far what I've done is root and unlock bootloader. Here is where the problem starts. When I try to reboot into CWM recovery it just boots me into the normal android recovery. Is this normal? every video I have watched shows people manually rebooting straight into CWM. The only way I can get it to work is if I go into EZ recovery and press "Flash" then "Reboot Into Recovery" buttons.
My second area of confusion is regarding the IMEI backup. Is this something everyone does when flashing roms on this phone? I am very confused as to what I'm supposed to do. Do I use the adb or download a terminal app from the play store? If someone could clarify that would be great !
Sorry if these questions are pathetic but this is my first time doing this and it's a learning experience I geuss. Here are the links to the guides I used for what I have done so far.
http://forum.xda-developers.com/showthread.php?t=1762709
http://forum.xda-developers.com/showthread.php?t=1852255
Thanks
I recently saw someone have a problem getting custom recovery persist, and another member pointed out a step you needed to do to get it to stick. I'll see if I can locate that post and add it to this post.
As far as IMEI goes, you only need to back it up once, and then you are good to go. Perform step a followed by step b in the backup thread.
apacseven said:
I recently saw someone have a problem getting custom recovery persist, and another member pointed out a step you needed to do to get it to stick. I'll see if I can locate that post and add it to this post.
As far as IMEI goes, you only need to back it up once, and then you are good to go. Perform step a followed by step b in the backup thread.
Click to expand...
Click to collapse
Alright thanks, so for most people once they flash it once it should stay every time they reboot into recovery? I have probably the noobiest question of all time, what does flashing CWM recovery even do? is it like flashing a rom where it just gets baked in to the OS permanently? Or does it actually provide a backup of data because I thought thats what nandroids were for.
Havent found exactly what I was recalling as far as the recovery problem, but I found something in a thread below this that makes me think maybe your bootloader wasnt unlocked properly. What version (if any) of ez recovery did you use?
Also, flashing CWM (ideally, at least) replaces the stock recovery with the clockworkmod recovery. Then, when you boot into CWM, that is where you make a backup (nandroid) of your current ROM. Once you have backups made you can quickly switch between ROMs by restoring the nandroids.
I hope I understood your question correctly and also answered it properly.
apacseven said:
Havent found exactly what I was recalling as far as the recovery problem, but I found something in a thread below this that makes me think maybe your bootloader wasnt unlocked properly. What version (if any) of ez recovery did you use?
Also, flashing CWM (ideally, at least) replaces the stock recovery with the clockworkmod recovery. Then, when you boot into CWM, that is where you make a backup (nandroid) of your current ROM. Once you have backups made you can quickly switch between ROMs by restoring the nandroids.
I hope I understood your question correctly and also answered it properly.
Click to expand...
Click to collapse
Yes you did, thank you so much. In the tutorial I used it was saying that the newer versions of EZ unlock were having problems so I downloaded version 1.2. How do I proceed if my bootloader was unlocked improperly? Also, I went in to EZ recovery and flashed CWM and made a nandroid backup if this matters.
Thanks so much for your help.
If you used version 1.2 then my point was moot. So you can only get into CWM if you install CWM from ez recovery and then hit reboot into recovery? If you do the hold vol up + home button while powering on it always takes you to stock recovery?
Yep its very weird. Not sure what to do.
Someone else will likely be able to chime in on how to correct this, unfortunately (or fortunately? lol) it hasnt happened to me so I havent had to deal with it. Its not a huge deal so I wouldnt worry about it.
Personally I use TWRP recovery. You can try that and see if it will stick, you can always go back to CWM later. Try it in ez recovery, or Goo manager from the play store (I use goo manager). If you want to try installing it from goo manager, install the app, hit menu, then select install open recovery script.
K cool. So would it hurt me if I just used ez recovery to flash and reboot everytime I need to get into CWM? Also for goo manager does that install the one you were talking about or CWM?
Sent from my SCH-I535 using xda app-developers app
Goo manager is only for TWRP recovery. And as long as the backups are being stored and you can access them the next time you get into CWM, it doesnt matter. Like I said, hopefully someone will be able to tell you how to correct this issue and we will both learn a thing or two from it.
Did you follow Step 12 in Section 2 in the first link you posted?
You have to make sure to go to CWM v6.0.1 in the drop down and install that version of Clockwork Mod Recovery.
I'm not sure if that's the cause of your issue, but you may want to check into that
Yep i did that
Sent from my SCH-I535 using xda app-developers app
Can someone please help D:
Sent from my SCH-I535 using xda app-developers app
So I rooted my brother's infuse 4G because it was slow as sin and needed A. a data/cache wipe and B, I wanted to give him Jellybean
I followed all the instructions I could; rooted, installed the modded 3e (or thought I did), got a CWM installed afterwards, and then set about installing first CM9 (as the Jellybean ROM post says I should) followed by the actual ROM and its Gapps. Well, I installed CM9 (although it seemed to take all of 30 seconds, rather fast...) when I tried to wipe data/factory reset, CWM froze. I rebooted and from then on I had it softbricked. Stuck booting at the samsung logo, and when I tried to return to the recovery, the recovery was a garbled mess that looked like a scrambled TV channel. I used Heimdall and did the one-click reset to stock, and here I am. The phone boots to stock just fine, but my recovery is still completely boned.
Do I re-root? How do I install CWM again without being able to install 3e? (can't install 3e without a working recovery in the first place, after all..)
One anomaly of note - when I was going about all this, booting the phone into recovery always got me 3e, even after installing CWM. I had to manually install CWM by using an update.zip and "reinstall packages" every time I wanted to use CWM. ROM manager would boot me to CWM, but it took several reboots and a flashable CWM zip before I could even get CWM installed in the first place - ROM manager refused to do it the easy way.
What did I do wrong, and more importantly, how do I get back on track? What do I do to put a fixed recovery back on this thing? Odin? ADB?
Today was the first time I ever used Heimdall, I've been a fair weather flasher since the beginning, I've never had to ADB or Odin.
It sounds like you didn't install cwm recovery properly, but I'm not sure I've never ran into this problem before. If you go here
http://forum.xda-developers.com/showthread.php?t=1524081 and carefully read over the first and second post you should end up with gb and red cwm recovery. The way I've done it was to put the phone in dl mode and flash the first package (the stock gingerbread att rom). After it is installed and booted up, I then power it off and go back into dl mode. Then flash the second package, which is just the kernel and red cwm recovery, (be patient because it takes awhile). Once that is done then go into recovery and wipe data/factory reset, wipe dalvik cache, wipe system, and install cm9. I think it only installs the kernel and recovery the first installation after formatting and creating the partitions, but after its done you have to go through the menus and tell it to reboot. After it reboots it will be stuck at the cyanogenmod galaxy s logo, so you will have to go into recovery once more. When you're there you should have blue cwm (only continue if you do) and install jb, without actually having to install the full cm9. When you navigate to which ever jb rom you want to install, a prompt will appear stating that there is incompatible partition layout and to confirm installation you will have to reselect the jb zip again to install. It will flash pretty quick because at this point its doing the same thing as when you went from gb to cm9 and only installs the kernel, recovery, and reformat/creates the partitions, (I think). It will reboot on its own but it will take you back into recovery. At this point all you have to do is navigate to the same jb zip you want to install and flash it, followed by gapps, and then reboot system. This process has worked for me but I highly recommend reading and following the instructions given in the post above.
Use goo.I'm app. Also you need to flash GB bootloaders in Odin . is recovery all colorful? If you see recovery fine just get goo app on play store and install a recovery
Sent from my SAMSUNG-SGH-I317 using Tapatalk
I would go the ODIN route, I have bricked so many times because i try to make the impossible possible. Just search for a already rooted pda,mdr file. I skipped the cm9 part idk if that would make things better or not but as my post says im a risk-taker
One thing I'd like to point out, flashing to ICS from GB requires 2 flashes. First flash sets the new partitions. You reboot and pull the battery, then boot back into recovery and reflash with the gapps.
That was the first problem I saw, and now commenting while on the Nexus I can't see the OP so that's all I'll comment on.
Sent from my Nexus 7 using xda premium
UnhoIy said:
One thing I'd like to point out, flashing to ICS from GB requires 2 flashes. First flash sets the new partitions. You reboot and pull the battery, then boot back into recovery and reflash with the gapps.
That was the first problem I saw, and now commenting while on the Nexus I can't see the OP so that's all I'll comment on.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
but if don't have any problems i'm good right or should i go back and do it
MajorLeagueROM said:
but if don't have any problems i'm good right or should i go back and do it
Click to expand...
Click to collapse
I've never skipped ICS and gone straight to JB like you, that's risk I've yet taken. I guess if you've had no problem then you're good, but I've gone back to stock and to JB at least 12 times now and used the same process every time without a hitch. In the case of OPs problem, I would just go back to stock and try again. Although I always go back to 2.2 stock...
Sent from my SGH-I997 using xda app-developers app
UnhoIy said:
I've never skipped ICS and gone straight to JB like you, that's risk I've yet taken. I guess if you've had no problem then you're good, but I've gone back to stock and to JB at least 12 times now and used the same process every time without a hitch. In the case of OPs problem, I would just go back to stock and try again. Although I always go back to 2.2 stock...
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
I'll just do it tonight then maybe my phone will run better, i thought i'd be a waste of time. thanks for the info
MajorLeagueROM said:
I'll just do it tonight then maybe my phone will run better, i thought i'd be a waste of time. thanks for the info
Click to expand...
Click to collapse
Lucky me, I get to go back to stock tonight for soft-bricking for the first time having this phone. It's what I get for trying to port a ROM with only a nights worth of research.
Oh well.
UnhoIy said:
Lucky me, I get to go back to stock tonight for soft-bricking for the first time having this phone. It's what I get for trying to port a ROM with only a nights worth of research.
Oh well.
Click to expand...
Click to collapse
lol it happens to the best of us