Booting Error with G2x - General Questions and Answers

Hi I have a T-Mobile G2x which I rooted a few days ago. Last night I was playing around with a program called "Kernal Lite" (or something to that effect) and I installed a MOD called Trinity CM 7. I knew CM stood for CyanogenMod so I installed it. It was rebooting and when it got to the part where it said T-Mobile G2x in silver letters, it froze for about 2 hours. So I panicked. I went into recovery mode and tried to install the factory firmware again but it gave me an error saying "E: Signature Verification Failed". So I formatted the system and everything and now it doesn't load. I can go into the recovery menu and I can let it load. If I let it load it goes past the LG logo and then TRINITY shows up in green letters and it freezes. Can anyone help me please? Thanks.
P.S.
Sorry if this is in the wrong section as I didn't see a help section in the G2x forum.

What you did was flash a Kernel that wasn't compatible with your ROM. You should be able to put another ROM (like CM7) and flash it through recovery..

Wow really? So how would a noob like me do that? Thanks so much for your help btw.

I sent you a pm

Related

[Q] Please help me on this i cant seem to find the answer anywheres

i have rooted my g2x several time but after i shut if off to charge at night i tuirned it on and it went straight to the cwm recovery screen i wiped it and restarted it and it went right back to it i flashed several other roms and when i went to reboot it it still rebooted to recovery screen i formated everything i new of what am i doing wrong. i had a stable rom in it and it was working for like 3 weeks before this happened . I hope someone can help me on this i love my phone and dont want to lose it. My computer is running on windows 7 i have tried these
http://forum.xda-developers.com/showthread.php?t=1056847
http://forum.xda-developers.com/show....php?t=1056847
and i even tried one where i tried to flash it back to stock and and now it stuck on a white box with an arrow coming out of it with and android robot in front of it
Did i brick this can it be saved i hope someone can help me one this i just pray i didnt brick it
STANC1 said:
i have rooted my g2x several time but after i shut if off to charge at night i tuirned it on and it went straight to the cwm recovery screen i wiped it and restarted it and it went right back to it i flashed several other roms and when i went to reboot it it still rebooted to recovery screen i formated everything i new of what am i doing wrong. i had a stable rom in it and it was working for like 3 weeks before this happened . I hope someone can help me on this i love my phone and dont want to lose it. My computer is running on windows 7 i have tried these
http://forum.xda-developers.com/showthread.php?t=1056847
http://forum.xda-developers.com/show....php?t=1056847
and i even tried one where i tried to flash it back to stock and and now it stuck on a white box with an arrow coming out of it with and android robot in front of it
Did i brick this can it be saved i hope someone can help me one this i just pray i didnt brick it
Click to expand...
Click to collapse
I don't exactly know how to fix your problem, but to shine some light, your not bricked. If u were, u wouldn't be able to access anything
Sent from my LG-P999 using XDA
STANC1 said:
i have rooted my g2x several time but after i shut if off to charge at night i tuirned it on and it went straight to the cwm recovery screen i wiped it and restarted it and it went right back to it i flashed several other roms and when i went to reboot it it still rebooted to recovery screen i formated everything i new of what am i doing wrong. i had a stable rom in it and it was working for like 3 weeks before this happened . I hope someone can help me on this i love my phone and dont want to lose it. My computer is running on windows 7 i have tried these
http://forum.xda-developers.com/showthread.php?t=1056847
http://forum.xda-developers.com/show....php?t=1056847
and i even tried one where i tried to flash it back to stock and and now it stuck on a white box with an arrow coming out of it with and android robot in front of it
Did i brick this can it be saved i hope someone can help me one this i just pray i didnt brick it
Click to expand...
Click to collapse
Use this to put cwm and then flash the rom you like.
If phone still boots into recovery you may have a stuck vol- button.
http://forum.xda-developers.com/showthread.php?t=1590523
Sent from my LG-P999 using XDA
i cant get into recoveery now im stuck in it relaoding as i tried to flash the recovery again and its stuck
try and flash again, if it doesn't stick, then try again. If it gives you an error report the error. Try what mansa_noob posted, it usually works for everyone, it fixes everything (partition and issues) and then flashes the recovery for you.

Stuck on LG screen

Hello so I tried to put genesis ics rom on g2x and followed instructions, now its stuck on his rom lg logo(meaning it shows lg logo, then shows custom logo) and I cant get into CWM either, any direction would help
What steps did you take because if the you followed the steps, it would boot.
Also, when you say you can't get into cwm, what does it say/do?
Does it show some grip reaper?
Sent From My Handheld Portal Device
So after hours of being up all night, I fixed it.....I was sooooo happy I was able to get CMW Recovery loaded on there through CMD prompt but at 1st it was gone cause I didt know that ROM manager put a fake recovery on there, so did it manually and put a new rom on sd card and now it works back to 2.3.4 stock rooted, but thanks for responses all

[Q] Flashed cyanogen mod 10.1, stuck at boot animation

I flashed the Cyanogen mod 10.1 nightlies for 2013-01-05. The boot animation was running for an abornomally long time so I pulled the battery and booted up and now the boot animation will not stop running. I tried searching for help but with no avail I have not found it too fix this problem. Also I made a CWM backup.
jubjubcat said:
I flashed the Cyanogen mod 10.1 nightlies for 2013-01-05. The boot animation was running for an abornomally long time so I pulled the battery and booted up and now the boot animation will not stop running. I tried searching for help but with no avail I have not found it too fix this problem. Also I made a CWM backup.
Click to expand...
Click to collapse
Also after trying too restore it, I just get the error Couldn't find directory no files found.
jubjubcat said:
Also after trying too restore it, I just get the error Couldn't find directory no files found.
Click to expand...
Click to collapse
Nevermind fixed it.
How did you fix it? rh
How did u fix it? I am facing a similar problem.
and when i tried to upgrade from cm10 to cm10.1 i was stuck at "Android is upgrading - Starting apps" screen. and a fresh installation of cm10.1 was stuck at the boot animation.
I am using Siyah Kernel 1.8.7 and having cyanogenmod as my secondary rom.
Plz help somebody
utsav7r said:
How did u fix it? I am facing a similar problem.
and when i tried to upgrade from cm10 to cm10.1 i was stuck at "Android is upgrading - Starting apps" screen. and a fresh installation of cm10.1 was stuck at the boot animation.
I am using Siyah Kernel 1.8.7 and having cyanogenmod as my secondary rom.
Plz help somebody
Click to expand...
Click to collapse
SiyahKernel s3-v1.8.8
Posted on January 13, 2013
Changelog
rebased on i9300 update7 sources (sudden-death issue is supposedly fixed in this source drop)
reverted temporary fix for exynos-mem exploit as i9300-update7 sources already fix that
cm10.1 is now supported in dual-boot configurations
1.8.7->1.8.8: fixed cm10.1 not booting when installed as 2ndROM (a tiny typo in ramfs)
BUT,it doesn't work anyway (just trying now at it's stuck on the boot screen)
Just try it and report back! :good:
You do realize that the siyah kernel is for the international S3 which has different hardware then our s3? If you are using a kernel for a different phone then of course it wont boot....
R: [Q] Flashed cyanogen mod 10.1, stuck at boot animation
By "International", you mean the exynox version unlocked right?
Sent from my GT-I9300 using xda app-developers app
R: [Q] Flashed cyanogen mod 10.1, stuck at boot animation
Whatever, it's been released v1.8.9 and it's said to fix the CM10.1 issues
Sent from my GT-I9300 using xda app-developers app
Flash problems
I've had installs stick at the boot animation or shortly thereafter several times. Usually it's because of a dumb mistake. The only thing that's consistently worked for me is flashing back to stock VZ firmware via Odin and doing the whole process over from root through installation. It sucks but it always works.
Howdy.
I've just flashed CyanogenMod 10.1 - 20130315 to my droid 4 with Safestrap, and I haven't been able to boot into it; the cyanogenmod splash screen with the rotating wheel graphic shows up, but it spins for upwards of 40 minutes without doing anything.
I followed the guide on the cyanogenmod wiki for the droid 4 device. The forum won't let me post a link to it.
Before I installed I wiped / factory reset, and after install I wiped cache/dalvik; still no dice. I've tried doing the same process several times (even wiking the system before trying to reflash), but the same result has always occurred: ever unhelpful eternal wheel...
I'm a bit at my wits end; I haven't been able to find any other information about this that wasn't solved by wiping cache / dalvik, so I turn to y'all for help.
Same here
I installed Cyanogenmod 10.1 with CWM the link:[Recovery/Bootstrap][5-sep-2012] CWM Touch recovery v6.0.1.1 - xda-developers and i went ahead and installed the mod: cm-10.1-20130211 all went fine untill i noticed that my camera is not working (not a big deal) but then i noticed that my phone only saw 488MB out of my 32GB this was un acceptable after i found how to connect my phone to my pc so it showed up as a storage device do that i copied the same mob but a different version (cm-10.1-20130129_v2) so i went ahead and booted into Android system recovery <3e> and i did a factory reset and then i said oh f*** i need CWMR to install the thing so i just waited for it to do its thing and then reboted the device thinking after i boot up i will reinstall CWMR but i was never able to boot because im stuck on the boot animation. Been waiting for +20min or so and nothing please help me what can i do this is my only phone please help
help with CM10.1 ROM issue
Hi folks,
this is my first post on XDA. I have a Sprint htc EVO 4G LTE phone which was running on JB.
Thought of root and flash with CM. So, first I unlocked the bootloader using htc dev and installed TWRP custom recovery and then rooted.
Then I flashed the stable CM 10 then flashed gapps which is compatible for CM 10 version. so far so good. oh, btw I did nandroid backup before flash and also wiped to factory reset, cache and Delvic cache.
After the flash i clicked on reboot system and I see the Cyanogenmod boot, but its stuck at that stage and I waited for more than an hour. No luck.
Thank god I did back up before this, otherwise not sure what I'm gonna do.
But, could someone tell me why it gets stuck at this point. I know some of you guys had this problem. I searched everywhere but didn't get help. I thought of posting this in android development forum, but as a newbie I can't do that.
Please help me out.
P.S: when I'm on boot screen (power button + vol down button) I see unlocked at the top but I also have TAMPERED in red color on top of that. Was this normal? or do you think that is causing the problem? and what should I do now?
(First of all I am not an expert)
It happens sometimes about 1/10 of every flashes I did with cm10
It might because some files didn't get copied or got corrupted.
Just try this method
Format data
Format system
Format cache
Wipe dalvick cache and factory reset
Now flash the ROM
Hit thanks if I helped
Sent from my WT19i using xda app-developers app
---------- Post added at 11:35 PM ---------- Previous post was at 11:27 PM ----------
(First of all I am not an expert)
First wipe every thing(system,data,cache,dalvick,android secure....)
Now install ROM,
Wait don't install gapps
Now find an extended cm10.1 kernel or lupus kernel(or such kernels) for your device and flash it via pc
I prefer flashing kernel after installing the rom
Hit thanks if I helped
Sent from my WT19i using xda app-developers app
NEED HELP Cm9
OK so i have xperia x10 mini i have root long time so i decided since there is no update from 2.1 that am gona manualy put new software.I watched youtube video on how to do cyanogenmod 9 so i did everything(flash,bootloader....) and after all that the screen started and i got stuck on that blue screen i tried to turn phone off that didnt work i can only restart the phone and when i plug in it doesnt say anything i cant open sd card or anything its just stuck like that pls help.SORRY FOR MY ENGLISH
neso97 said:
OK so i have xperia x10 mini i have root long time so i decided since there is no update from 2.1 that am gona manualy put new software.I watched youtube video on how to do cyanogenmod 9 so i did everything(flash,bootloader....) and after all that the screen started and i got stuck on that blue screen i tried to turn phone off that didnt work i can only restart the phone and when i plug in it doesnt say anything i cant open sd card or anything its just stuck like that pls help.SORRY FOR MY ENGLISH
Click to expand...
Click to collapse
Ask in the Xperia X10 mini forums.
Three-finger salute
Ran into this situation today when I tried to restore a backup and I couldn't get past the CM10 logo on bootup. Holding down all three buttons, power, volume up and down, got me back to the Clockworkmod boot screen.
ETA: Sorry, posted in wrong forum. My situation pertained to a Samsung Galaxy 5 Media Player.
neso97 said:
OK so i have xperia x10 mini i have root long time so i decided since there is no update from 2.1 that am gona manualy put new software.I watched youtube video on how to do cyanogenmod 9 so i did everything(flash,bootloader....) and after all that the screen started and i got stuck on that blue screen i tried to turn phone off that didnt work i can only restart the phone and when i plug in it doesnt say anything i cant open sd card or anything its just stuck like that pls help.SORRY FOR MY ENGLISH
Click to expand...
Click to collapse
Hi...i just happened to flash my x10 mini to cm9-robyn yesterday...same thing happpened to me...boot the animation until run of battery....i accidently booted it to recovery and just leave it...fortunately after sometime it booted by itself and run as normal. The cm9 run ok except the wifi is not working. Hope that will help. I am not an expert.

[Q] Bricked Phone stuck at boot - wrong version flashed (f350l on d838)

Hi everyone, I need a help on my LG G PRO 2. Basically what I did is being one of the biggest dickhead on the earth. I was so excited about gettin lollipop on this phone that I didn't noticed it was NOT for my phone.
So, before it happened i had d838v10f on it, rooted and recovery installed (it was an apk with a pharaoh...)
Then I get into recovery and flash this zip:
http://forum.xda-developers.com/lg-g-pro-2/development/b-futurev3-0-lolipop-walkman-f350l-s-k-t3001632
While flashing in recovery it says something went wrong, I reboot and it keeps staying in the boot screen. I noticed that the "powered by android" text in the bottom has changed, android L style, but it does not go forward.
So, I tried to go in download mode: Before it was in english, now it's in KOREAN. I tried to flash d838v10f kdz, and it goes on until 49%. It just stops and won't go on. So I also tried to push some .tot files, but this thime it doesn't even start. Part of the log says:
IMEI:NULL
Error: CrossDL [F350L] to [D838].
So, it's actually a F350L now, a NOT WORKING F350L.
If you have any question, or suggestion about it, don't hesistate!
THANKS!!!
Hi, eagle93. The same happened to me yesterday. Go here:
http://forum.xda-developers.com/showthread.php?t=3004653
And read from post #5 on... Good luck!

[Q] AT&T LG G2 Bricked?

So I was doing the usual and installing a new ROM: CloudyG2 3.0. After it installed it said "failed" and I was like "okay" so I rebooted my device and I got stuck in fastboot mode. I got this phone a week ago for my birthday and I really hesitated and I still am hesitating. I was looking all over XDA and found this http://forum.xda-developers.com/showthread.php?t=2477595 so I followed the instructions and got all the way to the download mode part. What was supposed to happen was when you entered download mode it went to the Firmware Update thing with the 0% bar right? Wrong, mine got stuck at Download Mode with the 5 blue dots getting bigger and bigger. I have tried so many things and I just cant get Firmware Update to pop up. If I could have some help that would be great. Thanks.

Categories

Resources