Hi!
My Htc Hd2 is only able to boot Windows.
What I have done
1. Flashed with a stock rom, LEOIMG.nbh wich I found here somewhere
- Everything went just fine, I had Android on NAND and went back to Windows
2. Flashed HSPL with mskip guide
"[TUT] Flashing your First GSM USA 1024LEO ONLY!! (For Noobs)" [1024mb]
- Everything went just fine, I checked the phone and it had HSPL 2.08
3.a Installed Android "Cyanogen CM7.1 (Gingerbread 2.3.4)" [AmeriCanAndroid]
- Everything went just fine, I followed the instruction carefully, it shut down after the installation and i pressed the power button to boot, but Windows booted and there was no option for Dual boot
( I have a Scandisk SD card, 8 gig, formatted before the installation, and after the installation I have ~7.5gig, ie. 1.3gig used )
3b. Rebooted, but still Windows.
4. Read that Radio Rom might have something to do with it, if its old.. So flashed a new Radio rom [Leo_RADIO_2.15.50.14**] I think I had 2.08.50 something before.
- Everything went just fine.
5. Rebooted but still Windows
I am starting to think I have missed a step, perhaps something wich was obvious to the writers for the guide.. Iam very new to android, recived my phone just yesterday.
What my phone have now [Software information ]
Code:
OS version
5.2.21889 (21889.5.0.87)
Manila version
2.5.20121412.1
ROM version
2.10.531.0 (82076) WWE
ROM date
02/19/10
Radio Version
2.15.50.14
Protocol version
15.42.50.11U
On file manager I can see the following:
Android
Application data
backup
DCIM
My Documents
fix_permissions 10-02-19 155B
Do I need any program to be able to dual boot or does the android version I installed include it?
Appreciate any help!
You need to go into the Android folder through Windows, run Clrcad.exe once (nothing happens), then run HaRet.exe to boot into Android.
Thank you for your reply!
Is this something I have to do everytime I reboot the phone?
If so, is there a way to make hd2 always boot the android?
Thanks!
abotiz said:
Thank you for your reply!
Is this something I have to do everytime I reboot the phone?
If so, is there a way to make hd2 always boot the android?
Thanks!
Click to expand...
Click to collapse
Yeah mate, you will have to as long as you are running an SD build.
You can get an app that will autorun at Windows boot and present you with a choice of which OS to run, but I can't remember what it's called. You should be able to find it somewhere in the HD2 SD forum.
The only way to circumvent this is to install a NAND build, but you lose Windows.
Thanks for your help, everything works just fine and I couldn't be happier
I would love to have NAND, but I think I wait a bit and enjoy 2.3.4
I just have one question, the Radio Rom that you flash, If I wanted to try out another one, do I just flash over the old one?
Thanks!
abotiz said:
Thanks for your help, everything works just fine and I couldn't be happier
I would love to have NAND, but I think I wait a bit and enjoy 2.3.4
I just have one question, the Radio Rom that you flash, If I wanted to try out another one, do I just flash over the old one?
Thanks!
Click to expand...
Click to collapse
My pleasure. That's right, just flash the new radio over the old one under Windows. Make sure it's a .50 radio otherwise it won't work with Android.
Good luck!
not supported !
Related
hey hey.
I tried the Simunlocker by jotach
Everything works fine. I get the code to enter, but the field for the 8 digit PIN isn´t there because I only can make Emergency calls...
I thougt it could be ROM problem and I´ve testet all HTC ROM till 1.57. and Installed the radio 1.0
No success.
I read about more people with this problem and without success. Is there another way to unlock? Or is this Phone to new?
Any comment is welcome!
Look on the vert first post under sticky. Unlock your Kaiser is o simple. I test my unlock Tilt with T-Mobile SIM I pop off my iphone. Wow, it works!!!!
Now, I can switch my Tilt with my iphone when ever I need it!!
farmer.joe said:
hey hey.
I tried the Simunlocker by jotach
Everything works fine. I get the code to enter, but the field for the 8 digit PIN isn´t there because I only can make Emergency calls...
I thougt it could be ROM problem and I´ve testet all HTC ROM till 1.57. and Installed the radio 1.0
No success.
I read about more people with this problem and without success. Is there another way to unlock? Or is this Phone to new?
Any comment is welcome!
Click to expand...
Click to collapse
Are you using a 6.1 ROM or 6.0 ROM? I had the same problem with a 6.1 ROM. I was forced to downgrade to a 6.0 ROM, Load the simunlocker, then load up the 6.1 ROM again. Hope this helps, Let me know how it goes.
Hi.
I appear to be having problems and my phone now thinks there is no sim inserted!!
#5. After you unpacked the download you see directories "step1" and "step2". Go into directory "step1" and run KaiserCustomRUU.exe.
This will flash the special patched radio rom. Follow the instructions until it is finished.
Everything was fine up to here!
Note that you can also skip step 6. and proceed with step 7.
#6. Power off your Kaiser and insert a 'strange' SIM, i.e. a SIM from another provider than the one your phone is locked to.
After changing sim as per #6, it now says “Insert SIM card”. – not proceeded to stage #7 yet.
#7. Once Windows Mobile has booted up it will (usually after you have entered the usual 4-digit PIN) show a window called "Simlock" and a textbox where you can enter a 8-digit unlockcode. Now perform a soft reset by pressing the reset button *but* at the same time keep the camera button pressed. If you did it well you will be back in bootloader mode and you see the tri-color screen. The best technique is to press and hold the camera button first and then shortly press the reset button with the stylus.
Anyone got any ideas, as my phone now does not recognise either my original sim or my spare sim.
I see there are a number of people who have experienced this problem.
My phone is the MDA Vario 3 on T-Mobile.
I didn't take a note of the correct ROM reference, only the bottom line which was "P 1.56.110.4", so I wouldn't know which ROM to flash it back to at the end.
All other functions are fine. WiFi, GPS and all my settings. I now have an american keyboard, so lost the £ (£) sign.
It will not recognise either my UK T-Mobile sim or my UK 3 sim.
MSanad said:
Are you using a 6.1 ROM or 6.0 ROM? I had the same problem with a 6.1 ROM. I was forced to downgrade to a 6.0 ROM, Load the simunlocker, then load up the 6.1 ROM again. Hope this helps, Let me know how it goes.
Click to expand...
Click to collapse
I tried with 6.0 and 6.1 !! HTC ROM, AT&T ROM dont work for me.
I downloaded them here: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
No success and i´ve tested lots of them!
I had exactly the same problem. Caused me a right headache, follow these steps:-
You are more than likely running 6.0 or 6.1 rom, you will need to downgrade first to a rom that's 5.xx first. Then run the Simunlocker and it will work and you will notice the icon to click "OK" on the sim entry screen will appear.
You can then reflash back to the rom that you are currently using, but I would suggest flashing dutty's rom as it's the best.
So to recap:-
1) Downgrade to a rom that's 5.xx first
2) Then run Simunlocker.
3) Then reflash to your current rom or Dutty's.
4) Might be wise to make a note of the radio version you are using as well and then reflash this again.
Good luck.
techceptional said:
I had exactly the same problem. Caused me a right headache, follow these steps:-
You are more than likely running 6.0 or 6.1 rom, you will need to downgrade first to a rom that's 5.xx first. Then run the Simunlocker and it will work and you will notice the icon to click "OK" on the sim entry screen will appear.
You can then reflash back to the rom that you are currently using, but I would suggest flashing dutty's rom as it's the best.
So to recap:-
1) Downgrade to a rom that's 5.xx first
2) Then run Simunlocker.
3) Then reflash to your current rom or Dutty's.
4) Might be wise to make a note of the radio version you are using as well and then reflash this again.
Good luck.
Click to expand...
Click to collapse
HEY THX for your fast reply!
do you still have a link where i can download?
If you have it on your HD, would be nice if can upload it to me...
but... iam really happy to hear that someone had same prob
techceptional said:
So to recap:-
1) Downgrade to a rom that's 5.xx first
2) Then run Simunlocker.
3) Then reflash to your current rom or Dutty's.
4) Might be wise to make a note of the radio version you are using as well and then reflash this again.
Good luck.
Click to expand...
Click to collapse
There is no such thing as a WM5 rom for the Kaiser. Your only choice is 6.0 or 6.1.
OK, I'm wrong on the 5x version (i'm a bit of a newbie). To clarify this I flashed Alex's rom to fix the problem (6.0). Quote from Simunlocker:-
Note for WM6.1 users
================
Do not try this on 6.1! You will need to downgrade to 6.0
Farmer Joe - here's the link to the thread - http://forum.xda-developers.com/showthread.php?t=354583
You will need to search for Alex's Flash rom - ver .52 ultraclean (this worked for me). Then run simunlocker, then run Dutty's rom if you want, then flash a later radio rom for better battery life (I'm using 1.64.08.21...)
How do we setup a WIKI for Orange users then? Any ideas - new to me sorry.
techceptional said:
OK, I'm wrong on the 5x version (i'm a bit of a newbie). To clarify this I flashed Alex's rom to fix the problem (6.0). Quote from Simunlocker:-
Note for WM6.1 users
================
Do not try this on 6.1! You will need to downgrade to 6.0
Farmer Joe - here's the link to the thread - http://forum.xda-developers.com/showthread.php?t=354583
You will need to search for Alex's Flash rom - ver .52 ultraclean (this worked for me). Then run simunlocker, then run Dutty's rom if you want, then flash a later radio rom for better battery life (I'm using 1.64.08.21...)
How do we setup a WIKI for Orange users then? Any ideas - new to me sorry.
Click to expand...
Click to collapse
Everythink works fine now!
To all people with same prob... download Alex's v4 UltraClean and MultiMedia ROMs for AT&T and HTC
then flash the Radio ROM 1.0 from Step 1...
Jehaw! My Kaiser is unlocked!
Thanks everybody for your help and thanks to jotach for his great work!
keep up your good work!
Glad you got it sorted! Enjoy your unlocked Kaiser
NotATreoFan said:
There is no such thing as a WM5 rom for the Kaiser. Your only choice is 6.0 or 6.1.
Click to expand...
Click to collapse
Actually he is correct. I assume he's talking 5.0 CE Version, which indeed the standard WM6.0 Roms are. WM6.1 is CE OS 5.2.
That is the embeded CE version that WM is based upon.
CE 5.0 or 5.1 = WM6.0
< CE 5.2 = WM6.1
I may have stumbled across something while updating from Revolution 3.1 to the new 3.3 rom. I used this http://http://forum.xda-developers.com/showthread.php?t=1002226 to try and update the radio since it requires the newer one. During this it reset my root and made it so I had to start over. I had the right radio now just didnt have root or anything else I wanted. I used http://http://forum.xda-developers.com/showthread.php?t=961406 to reroot. Now this changed my radio back, I even tried to replace the radio img in the program to use mine instead. After all was said and done I put the new http://http://forum.xda-developers.com/showthread.php?t=964841 Revolution on my sd card after reroot, I had put the radio zip I wanted on the sd card also before and forgot. I went to rom manager and installed rom from sd card zip. When this was finished it had installed the new rom and updated the radio to the new version I wanted in one pass. I have read not to install through rom manager and to follow the directions on how to upgrade the radio, but somehow it did it all together. These were on the sd card seperate and I only clicked the rom to install and didnt touch the phone until it finished booting back up. I am posting this to let others know, this may have been a freak of radio flashing but it might work for others also. I admire all of you who can and do make it so we can all enjoy our toys more, I really wish I was able to do it also.
muchas gracias : D
I said I would flash cyanogenmod on a friends G1 because he was fed up with 1.6. I've flashed many custom ROM's on several different devices before but I've made a mess of things with this G1 and I can hardly hand back an unusable phone so I would really appreciate your help.
I rooted the phone using Androot, backed up the apps and settings using titanium backup and then the texts using a text backup app. I then downloaded Rom manager and flashed the latest clockworkmod recovery. Next I downloaded the latest official cyanogenmod rom for the dream/g1 and placed it on the phones SD card using my computer. I then re-opened rom manager and used it to select the zip file from the sd (to flash it) on prompt I checked two boxes one to wipe data and one to wipe the dalvik cache and pressed ok.
The phone rebooted into the recovery wiped the stuff, supposedly flashed the rom and rebooted. However it got stuck on the t-mobile g1 boot screen(it never showed anything else first or anything after) I left it for ages with no joy. I then tried wiping from the recovery and flashing again - same thing so i put cm5 on and tried flashing that. Same problem. Then i realised that it probably would not work because I would need to use DangerSPL as the /system partition is too small on the dream/g1. To be honest at this point I can't be bothered with to do that and this guy will be happy with anything above 1.6 to be honest so I thought I would try and flash CM4 because that's based on Eclair I believe (and so it not require I use DangerSPL or any other method to repartition the NAND). However, I tried it twice and still no luck.
At this point I'm somewhat panicking as I cannot seem to make the phone boot and it isn't even mine! Is anyone able to help?
Anyone? Please?
Look, at this stage I will forget custom roms etc. If anyone can tell me the easiest way to get this phone booting android again i would be very grateful.
Even if you could just tell me exactly how to restore it to stock 1.6 from here?
I have flashed roms on phones before - never had a problem but this is driving me crazy - please help!
wollac11 said:
Hi I said I would flash cyanogenmod on a friends G1 coz he was pissed off with 1.6 but im having trouble and I can hardly hand back an unusable phone so i really need your help.
I rooted the phone using Androot, backed up the apps and settings using titanium backup and then the texts using a text backup app. I then downloaded Rom manager and flashed the latest clockworkmod recovery. Next I downloaded the latest official cyanogenmod rom for the dream/g1 and placed it on the phones SD card using my computer. I then re-opened rom manager and used it to select the zip file from the sd (to flash it) on prompt I checked two boxes one to wipe data and one to wipe the dalvik cache and pressed ok.
The phone rebooted into the recovery wiped the stuff, supposedly flashed the rom and rebooted. However it got stuck on the t-mobile g1 boot screen(it never showed anything else first or anything after) I left it for ages with no joy. I then tried wiping from the recovery and flashing again - same thing so i put cm5 on and tried flashing that. Same problem. Then i realised that it probably would not work coz i would need to use DangerSPL coz the /system partition is too small on the dream/g1. Tbh i'm tired so I cba to do that and this guy is not that technical so he will be happy with anything above 1.6 so I thought I do CM4 coz thats 2.0 or 2.1 i seem to remember (and it not require I use DangerSPL) - tried it twice and still not luck.
HOW THE HELL CAN A GET THIS STUPID THING TO WORK AGAIN!??
MAJOR PANIC AS THIS IS NOT MY PHONE - PLEASE HELP!!!
Click to expand...
Click to collapse
Try this thread: http://forum.xda-developers.com/showthread.php?t=803482. I hope it helps.
It's been way too long since I rooted mine to be of any real help but I shall try nonetheless.
Firstly, there is a guide in the G1 forum to unroot and get back to stock firmware: Here (but note that I've never done this).
I must stress though (admittedly from memory) that if you have flashed an SPL or radio image at all, be VERY careful about the order in which you revert back to stock (or go to get a custom ROM depending on which way you decide to go). The G1 is very picky, and flashing things (mostly SPL and radio IIRC) in the wrong order will brick the device. That said, if you follow the instructions you find to the letter you should be OK. But yeah, read twice, flash once.
There is a lot of information in the stickies in the G1 forum. It could take a while to wade through but it should all be there. Failing that, post in the Q&A or General G1 subforums and I'm sure a current user will help you out.
I apologise if I've just posted a bunch of stuff you already know/have read - like I said, I've not used the phone in a while - just trying to offer what I can.
Thanks
No worries now guys i've done it! It was quite complicated but its all sorted now. If anyone is trying this and has the same (or similar) issue then pm me and I will tell you how I sorted it.
Otherwise thanks guys and you can conciser this thread:
---------------------closed--------------------------
Hi,
I have my Sensation 2.3.3 S-Off, Super-CID, all that stuff, although it is on stock firmware.
Just wondering, does anyone know from experience or otherwise, will the new 2.3.4 update cause any problems? Bricking caused by update or anything?
I'd rather not S-On manually as I'd have to reflash firmware and I don't want to lose all my personal data, apps, etc.
I don't really care if it goes S-on, as long as it still works!!
Thanks!
P.s. I debranded from Vodafone to Stock Europe, can the CID be rewritten?
--Removed--
Seriously,
U'v come this far and have not flash'd some InsertCoin 2.2.2 Sense
into your Sensation yet? (2.3.4 with OC safely op to 1.5 GHz)
Check this tread and discover what you'v been missing out on.
Get titanium to backup your apps, spend some quality time with your phone and you'll never regret it!
It was the first thing i did after S-off and rooting.
Flashing the radio could be a little "exciting" but whent without a hitch for me. (and most of us)
You'll never go back.... promise!
Jesus, just realized i sound like an infomercial,....
12013E12T said:
Seriously,
U'v come this far and have not flash'd some InsertCoin 2.2.2 Sense
into your Sensation yet? (2.3.4 with OC safely op to 1.5 GHz)
Check this tread and discover what you'v been missing out on.
Get titanium to backup your apps, spend some quality time with your phone and you'll never regret it!
It was the first thing i did after S-off and rooting.
Flashing the radio could be a little "exciting" but whent without a hitch for me. (and most of us)
You'll never go back.... promise!
Jesus, just realized i sound like an infomercial,....
Click to expand...
Click to collapse
I have to agree, InsertCoin 2.2.2 Sense rom just rocks. If you want to go to Android 2.3.4, just flash this or one of the other custom roms out there that have been updated already using the EU stock rom.
Flashing InsertCoin now! Seems to be going well.
So much easier than expected!
Thanks for the sales pitch, worked a treat!
On the white HTC boot screen for nearly 20 minutes...
Doesn't seem to be looping, just not doing anything???
ok,... that kinda sucks.....
Did u get it going already?
What guide (if any) did u follow?
At what point did this happen?
Can you adb to it?
It's all good now, wiped data with CWM and reflashed and It's working!
Love the speed... Just need to update the radio and flash the overclock kernel.
When updating the radio CWM keeps saying "wrong zip file" though. Any ideas on what could be going on there?
Also, how do you flash to 2.2.2 and the overclock kernel? Just copy to SD and use CWM?
Thanks!
Sent from my HTC Sensation Z710e using XDA App
Glad to hear it worked out.
And now to top it all up with a recent radio file and some oc madness
Doing the following is on your own risk! I din't force you to do it,
think before act and don't blame me when [email protected]#g it up.
To flash the radio you should,
Download this radio file,
Make sure the filename is PG58IMG.zip exactly or it will not work.
copy it to the root of your sd card.
Download a md5 checker from te market and check the file, The md5 should match up with this one.
md5: 64a0383b87b4b780cf516f7d7e43b784
If not, redownload & try again.
this is very imporant!!
If you flash a corrupted file you will own a very expensive brick!
Now:
Turn your phone off, take out the battery.....wait a few seconds and put it back in.
power up your phone while holding down the vol- button.
The bootloader will scan for the radio update.
Once it finds the update, select Yes.
Allow the bootloader to finish flashing the updated radio, and boot
The radio file is now flashed.
Remove de PG58IMG.zip file from your SD card BEFORE rebooting your phone or it'll try to flash it again when powering up after draining your battery.
To flash the 2.2.2. ROM
put it on your sd card
recovery - wipe all (data/factory reset)
select the file in cwm en confirm.
Also, Never install a theme on an unbooted fresh install, leads to f/cs.
Kernel can be done in cwm aswell by selecting the file and flashing it.
The tool to oc it is included.
Thats it. Good luck, and let me know.
Wow!
Thanks for the noob-friendly tutorial!!
Will try it later tonight and let you know how it goes.
Just with the radio update, fastboot keeps saying "wrong zip file" or something like that... Md5 was correct but still nothing... Bit will try again
Do I definitely need to wipe everything to flash 2.2.2? I have titanium set up and everything backed up anyway, but just wondering. Losing my data for a third time will make me cry a little!
Again, thank you!!
Sorry, also, in CWM do I just "install zip from sd card" to flash the kernel and 2.2.2 ROM, yeah?
Your welcome
I know it sucks, you don't have to wipe BUT, it can (not saying it will) lead to strange issues like force closes etc.
It's up to you.
About the radio file,
Im pretty sure you have the radio file in the wrong location.
It should be placed in the root of your sd card, not the root of your divice.
So like this /sdcard/PG58IMG.zip
NOT in /PG58IMG.zip
khanley said:
Hey, got the radio working perfectly. Trying to copy the 2.2.2 Rom now and it just wont copy onto the SD through copy and paste or adb push. I have no idea what's wrong with it...
Click to expand...
Click to collapse
Are you sure there is enough free space on your SD-card?
If so, try downloading it directly on your phone.
Got everything working! Have insertcoin 2.2.1 with UnityV7 working perfectly (2.2.2 is unstable on my phone... SU, gmail and facebook all force close)
Absolutely delighted with the results! Wont be looking back
Turns out the problem was a bad SD card (which is making me cry since it's a kingston 16GB class 10)
Anyway, thanks for all your help, I really appreciate it!
Nice! Glad it worked out, and sorry for your loss
Sorry to hear 2.2.2 is not stable for you tho.
Baad (the InsertCoin ROM cook) mentioned a few days ago that work is being done on a new kernel especially written for his ROM so maybe that's worth a shot in a couple off days....
Anyways,....glad i could help, happy camping!
Hey Guys, i installed MIUI on Android version 2.3.7 and i tried to install Android Revolution HDand when i flashed PG58IMG.ZIP it said the model number is wrong on the bootloader screen and it won't let me get to recovery (4EXT) so I have to take the memory card out to get to recovery. Also i backed up my data, used SuperWipe, and flashed Android Revolution and restarted, my phone gets stuck on the HTC Quietly Brilliant Screen and won't boot. So then i took the memory card out an the battery out, and put it back in to get to recovery mode and i went back to MIUI.
What Should I do?
Thanks Guys
im not sure but it sounds like maybe you dont have your cid for the rom you want or not everything matches up i suggest you go to this link and make sure you have everything. http://forum.xda-developers.com/showthread.php?t=1192300
also you said 2.3.7? i say you should upgrade to ics, alot of roms are based in that now anyway in including MIUI. also for AHDR check out this thread on everything
http://forum.xda-developers.com/showthread.php?t=1472298&highlight=change+cid