Has anyone worked out how to adjust the cursor speed when you have a mouse attached? it's fast when using the touchpad but slower when using a mouse
checkbox111 said:
Has anyone worked out how to adjust the cursor speed when you have a mouse attached? it's fast when using the touchpad but slower when using a mouse
Click to expand...
Click to collapse
Just move your finger more slowly
Sorry, couldn't resist
Or alternatively, apply oil to your desk under the mouse, and watch that sucker zip across it and onto the floor in no time! Im sure the cursor will move nicely then.
cjwilber said:
Just move your finger more slowly
Sorry, couldn't resist
Click to expand...
Click to collapse
It's the mouse speed i'm concerned about
stuntdouble said:
Or alternatively, apply oil to your desk under the mouse, and watch that sucker zip across it and onto the floor in no time! Im sure the cursor will move nicely then.
Click to expand...
Click to collapse
All that did was to make my trackball oily
checkbox111 said:
It's the mouse speed i'm concerned about
All that did was to make my trackball oily
Click to expand...
Click to collapse
You really did it? Lmao!
Sent from my Transformer TF101 using XDA Premium App
Related
I just bought the acer a500 a few days ago i love it but one thing that bothers me is i see a grid pattern across the screen when in certain light is this normal anyone else see this pattern on theirs??
shawnx1 said:
I just bought the acer a500 a few days ago i love it but one thing that bothers me is i see a grid pattern across the screen when in certain light is this normal anyone else see this pattern on theirs??
Click to expand...
Click to collapse
It is the capacitive sensors, and normal.
Sent from my A500 using XDA Premium App
got mine on weekend and yeah it like dots on the screen this is due to the type of screen it is i believe but its not really noticeable at all when in use. the tablet runs like a dream and has just gotten root access
id10terrordfw said:
It is the capacitive sensors, and normal.
Sent from my A500 using XDA Premium App
Click to expand...
Click to collapse
Thanks for that info. So seeing that sensor means it's a cheap screen? kinda sucks cause I'm going to be using this thing outside a lot. Does anyone know if the asus transformer shows that grid ??
Nope, doesn't mean that it is necessarily cheap, and you get used to it.
Sent from my A500 using XDA Premium App
Acer A500
what exactly does the USB 2.0 support I plug in a flash drive and it reads the storage use and availible but can not open to view any files. I have pluggen in a USB corded and wireless mouse with no such luck ??????????
pmm1211 said:
what exactly does the USB 2.0 support I plug in a flash drive and it reads the storage use and availible but can not open to view any files. I have pluggen in a USB corded and wireless mouse with no such luck ??????????
Click to expand...
Click to collapse
make sure the drive isn't formatted NTFS
I have the latest dock firmware but there is no pinch zoom in any apps, is this normal?
Sent from my Transformer TF101
I've tried the same, it seems all single point does is move the mouse point, and two points you can scroll up and down/side to side. Any more then 2 doesn't seem to do anything. I'm hoping more gestures gets added down the line, but I guess its not too hard to reach up and hit the screen either.
currently the touchpad has limited MT support.
The only multitouch is two fingers in any direction scrolls. nothing else works.
So yes it is normal what your experiencing. Unfortunately for the time being, and possibly forever since asus hasn't commented, you'll always have to use the screen to zoom.
I found that in a browser, double tapping the touchpad zooms in and double tapping a second time zooms out. Just shows that they might be able to unlock more possibilities in the future... Maybe...
Sent from my Transformer TF101 using XDA Premium App
Bradical said:
I found that in a browser, double tapping the touchpad zooms in and double tapping a second time zooms out. Just shows that they might be able to unlock more possibilities in the future... Maybe...
Sent from my Transformer TF101 using XDA Premium App
Click to expand...
Click to collapse
so THATS how i keep doing that! sob! lol. i was wondering why the browser kept zooming in lol
I did a search but I did not find one but I'm hear to let you know that the mouse pointer is back.
Sent from my Transformer TF101 using XDA
You just figured this out? It's been back for a while.
detbydave said:
I did a search but I did not find one but I'm hear to let you know that the mouse pointer is back.
Sent from my Transformer TF101 using XDA
Click to expand...
Click to collapse
Yes, it's back, but using removes the gesture actions that the circle cursor has. Why couldn't they just change the skin without screwing up functionality? Personally, I'm sticking with the circle pointer, but a nice little dot in the center of that circle would be awesome for precision clicks - like when using an RDP client.
I am on prime 1.84 and would like to know how to get the mouse pointer back?
settings > language and input > touchpad pointer style
Sent from my Transformer TF101 using Tapatalk
Ive know that we can copy paste with a long pressing on the screen
but its not so convenient
are their any hot key on the keyboard……that would help a lot
if not……may any professional genius guy make it come true?
Control+c, control+x, and control+v on the dock work as might be expected. Most of the time controo+a does as well but sometimes I have to hit it like 3 times.
Sent from my Transformer TF101 using Tapatalk
Spidey01 said:
Control+c, control+x, and control+v on the dock work as might be expected. Most of the time controo+a does as well but sometimes I have to hit it like 3 times.
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
truely have found that
now……another problem
how to select by using mouse with "leftclicking + moving"
Honeycomb+ and some apps (Opera Mobile) have very good selection, tap/hold or click/hold a word to select it. Using your fingers to tap/hold or the touch pad to click/hold on the blue bars, will allow you to adjust the selection. This is a lot more flexible than the model used by Windows and X11, and much closer to how Vim and Emacs does it.
Personally I find the touch pad great for adjusting the selection, even if I usually use the finger. In the TF101 (and probably Android in general), using a mouse is just a virtual finger, it should work the same way as your finger. The touch pad becomes much like touching the screen in a way.
Just play around with your device and see what does what. Software wise it's hard to break unless you are flashing something.
Sent from my Transformer TF101 using Tapatalk
Spidey01 said:
Honeycomb+ and some apps (Opera Mobile) have very good selection, tap/hold or click/hold a word to select it. Using your fingers to tap/hold or the touch pad to click/hold on the blue bars, will allow you to adjust the selection. This is a lot more flexible than the model used by Windows and X11, and much closer to how Vim and Emacs does it.
Personally I find the touch pad great for adjusting the selection, even if I usually use the finger. In the TF101 (and probably Android in general), using a mouse is just a virtual finger, it should work the same way as your finger. The touch pad becomes much like touching the screen in a way.
Just play around with your device and see what does what. Software wise it's hard to break unless you are flashing something.
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
thx for ur answer
i will play aroud it much carefully then^mayby find another land there^
I found some info on another site that helps with the fingerprint sensor:
It seems like the key is to press relatively hard when swiping your finger. I've tried that a number of times now, and it seems to be working much better. I'm even able to get one handed unlock with the fingerprint sensor.
Hope this helps.
Sideways thumb swipe: rotate thumb to maximize print area while swiping during record and read.
Works fine.
Sent from my SM-G900S using XDA Premium 4 mobile app
f308gt4 said:
I found some info on another site that helps with the fingerprint sensor:
It seems like the key is to press relatively hard when swiping your finger. I've tried that a number of times now, and it seems to be working much better. I'm even able to get one handed unlock with the fingerprint sensor.
Hope this helps.
Click to expand...
Click to collapse
I have fingerprint sensor in my phone. i feel good to use it. thanks
Nice you guys have finger print sensor on your phones.
Lodaserves said:
Nice you guys have finger print sensor on your phones.
Click to expand...
Click to collapse
Do you have it ?
i think Finger Print sensor will give you good security on your Phone..
Anyone that uses a fingerprint scanner on a locked phone is really, really unfortunate.
Guadalupeohara said:
Do you have it ?
i think Finger Print sensor will give you good security on your Phone..
Click to expand...
Click to collapse
Nah i dont have yet..yeah its true good security on the phone you have.
Glad to see you guys are having success. Mine sucks, works about 30% of the time.
Lodaserves said:
Nah i dont have yet..yeah its true good security on the phone you have.
Click to expand...
Click to collapse
You can get it from google play store..
https://play.google.com/store/apps/details?id=com.ponyrocket.fingerprint
Guadalupeohara said:
You can get it from google play store..
https://play.google.com/store/apps/details?id=com.ponyrocket.fingerprint
Click to expand...
Click to collapse
Thanks for the link man!:good:
Lodaserves said:
Thanks for the link man!:good:
Click to expand...
Click to collapse
You are welcome. Anything help do you want ?
What I did was use the 3 allotted different fingerprints and scan my thumb at slightly different angles so I could swipe my thumb horizontally rather than vertically and it works a lot better now.
I feel clever ...unless this was already mentioned
Sent from my SM-G900V using Xparent Skyblue Tapatalk 2
The following was in another thread, so thought I would copy it here for posterity:
armyranger172 said:
So I was playing around with the fingerprint scanner and wanted to add more then 3 fingerprints. When I was setting up my thumb, I also swiped my pointer finger. After the set up was complete. I found it let me unlock the phone with both fingers from the one setup. I haven't seen this mentioned yet, so I figured someone out there might find it useful.
Semper Primus
Click to expand...
Click to collapse
Confirmed that it worked on my device. I was able to register right thumb, left thumb and left index finger on just one setting.
Maphack said:
What I did was use the 3 allotted different fingerprints and scan my thumb at slightly different angles so I could swipe my thumb horizontally rather than vertically and it works a lot better now.
I feel clever ...unless this was already mentioned
Sent from my SM-G900V using Xparent Skyblue Tapatalk 2
Click to expand...
Click to collapse
:good::good: