Database Info

Phone not starting after flash.. tried a new version of wm6.. please help

i originally had faria's wm6 on my phone, but then i wanted to try xplore core 2.0. i flashed it, but when it finished it would start. it wouldnt go past the second splash screen. i tried a hard reset using the hard keys, but when i try it, it says format failed. i have tried to reflash using bootloader using the OEM carrier roms from both t-mobile and cingular. i am having the same issue no matter what i do. if there is anything i can do to fix this.. please help me because i constantly use my wizard and i don't no what i can do without it. i really appreciate any input. thanks

im not sure what to do but i figured i'd respond just so you know people are trying to help. I've heard of the format failed problem, but im not sure what the solution was. Good luck!

What device do you have ? A G3 ?

How I fixed my Format failed problem...
This is a quote from thread
http://forum.xda-developers.com/showthread.php?t=276963&highlight=splash+screen+freezing
I followed these steps with an SD card fresh from the package...
Drug_Store said:
...
2- Get a clean SD card (in qtek 9100 / Htc Wizard case is MiniSD) with 128MB (some people say 64MB, but I personally used a 128MB, maybe a 64MB is enough)
3- Kill (task manager) wescomm.exe (this is related with activesync installed on your PC). Insert the blank SD card on the phone.
4- Get your phone in bootloader mode. Like this : Phone powered off, press Camera button + Power On, will enter in bootloader mode (RGB screen).
5- Now connect your USB cable to your phone. And start MTTY_updateROM.exe (http://wiki.xda-developers.com/uploads/romupdate.rar). After open, on Port selection, choose \\.\WCEUSBSH001 and press OK. A window will open with a blank sheet.
6- Type "r2sd all" and hit enter... wait to the end (at end shows "cmd>"). On your phone screen u can follow backup progress... small bar will appear down the RGB screen.
7- Power off the phone (or remove battery), enter bootloader mode (camera button + power on) and this time RGB won´t appear right away. Will ask if u want to "download SD image", press voice dial button to agree, and writting will begin. Wait to the end. Power off and power on normally. Now your phone should be working ok. Not even needed to reflash the phone after this.
Thanks to all and hope this helps more people with this problem
Click to expand...
Click to collapse

thanks guys... im going to try that.. and just so all of you know, its a g3

thanks everyone who helped me out. my wizard is working perfectly again. i appreciate all the help

wow that's awsome

idd, mtty is last chance weapon.

woah...
Guess I'll post this...
For the record, the Core 2.0 rom ****ED my phone up too. When I tired to flash back a different rom because of all the changed **** in Core 2.0 my phone flipped out. I had to flash it 3 or 4 times to get it to even boot.
I recommend anyone thinking of tyring Core 2.0 to stay away from it unless they don't plan on changing roms after going to it.

GldRush98 said:
woah...
Guess I'll post this...
For the record, the Core 2.0 rom ****ED my phone up too. When I tired to flash back a different rom because of all the changed **** in Core 2.0 my phone flipped out. I had to flash it 3 or 4 times to get it to even boot.
I recommend anyone thinking of tyring Core 2.0 to stay away from it unless they don't plan on changing roms after going to it.
Click to expand...
Click to collapse
yes, i edited it.

I believe operator error isnt something to blame on the rom. Anyone that openly drops the "F" bomb when discussing a cell phone really should get a life.
GldRush98 said:
woah...
Guess I'll post this...
For the record, the Core 2.0 rom ****ED my phone up too. When I tired to flash back a different rom because of all the changed **** in Core 2.0 my phone flipped out. I had to flash it 3 or 4 times to get it to even boot.
I recommend anyone thinking of tyring Core 2.0 to stay away from it unless they don't plan on changing roms after going to it.
Click to expand...
Click to collapse

anichillus said:
You are an asshole, pardon my language. My rom doesn't **** systems up, mabe you just don't know what you are doing.
I won't release any more roms. I am just tired of all this SH**. I stay calm and watch people who only know how to complain and don't give a F*** about all the work that's put up just for free, but this does it. I am giving up.
I can't afford to brick my Wizard for people like you who are simply here as ignorant sharks.
Click to expand...
Click to collapse
You sound like Faria...LOL!
Really, that's why I put what I did in my thread about saying "My phone is stuck in bootloader..." (remember the fillet knife?) ROM's DO NOT MESS UP A PHONE UNLESS THEY ARE CID LOCKED, THE FLASHING PC HAS ISSUES, OR BECAUSE OF OTHER OPERATOR ERRORS.
Don't let it get you down. You're doing a good work and if one or two people out of a thousand can't get it right, then they need to be running carrier ROMs, and you can stay calm and happy helping those who really need it.
See, that's not so bad now is it?

GldRush98 said:
woah...
Guess I'll post this...
For the record, the Core 2.0 rom ****ED my phone up too. When I tired to flash back a different rom because of all the changed **** in Core 2.0 my phone flipped out. I had to flash it 3 or 4 times to get it to even boot.
I recommend anyone thinking of tyring Core 2.0 to stay away from it unless they don't plan on changing roms after going to it.
Click to expand...
Click to collapse
i went form core 2.0 back to the tmobile rom and then to the core 2.0n and it worked fine. did you lose connection during the flash or somthing?

anichillus said:
You are an asshole, pardon my language. My rom doesn't **** systems up, mabe you just don't know what you are doing.
I won't release any more roms. I am just tired of all this SH**. I stay calm and watch people who only know how to complain and don't give a F*** about all the work that's put up just for free, but this does it. I am giving up.
I can't afford to brick my Wizard for people like you who are simply here as ignorant sharks.
Click to expand...
Click to collapse
Boy, I know more about what I'm doing then most people here put together.
Your rom ****ed my phone right in the ass.
Luckily I recovered from it.
You call your Rom "stock" yet YOU CHANGED ALL KINDS OF STUPID STUFF IN IT.
Like the alignment screen graphic?
Why the hell would you do that.
Or putting on 3 different boot screens. wtf?
Oh yeah, not to mention it runs like **** before even loading any more software on it since you used the OLD WM6 build.
Don't release any more.
You're terrible at it.
kthx bye.

jawnsixteen said:
i went form core 2.0 back to the tmobile rom and then to the core 2.0n and it worked fine. did you lose connection during the flash or somthing?
Click to expand...
Click to collapse
Nope, flash went to 100% then the phone tried to reboot and nothing happened.
I do all my flashing on that machine because it's stable and I have never had a problem flashing until the Core 2.0 rom. That is the first and only rom I have had any trouble with.

golfernutnflorida said:
I believe operator error isnt something to blame on the rom. Anyone that openly drops the "F" bomb when discussing a cell phone really should get a life.
Click to expand...
Click to collapse
OMG, he used a naughty word.
Like you don't hear it daily?
Get real.

GldRush98 said:
Boy, I know more about what I'm doing then most people here put together.
Your rom ****ed my phone right in the ass.
Luckily I recovered from it.
You call your Rom "stock" yet YOU CHANGED ALL KINDS OF STUPID STUFF IN IT.
Like the alignment screen graphic?
Why the hell would you do that.
Or putting on 3 different boot screens. wtf?
Oh yeah, not to mention it runs like **** before even loading any more software on it since you used the OLD WM6 build.
Don't release any more.
You're terrible at it.
kthx bye.
Click to expand...
Click to collapse
I do my rom as I please, you can't question that.
For YOU to know all roms have 3 (boot =NOT) splash screens You're just too SMARTass to notice.
You can quote multiple post in same message, in case that slipped your soo full-of-knowledge mind.
I used old WM6 build ? Please explain to me what you mean ...i am not that wize
I did not called my rom STOCK ! I called it Core . But you are probably too smart to actually even read anything.
In case you don't understand the word "CUSTOM", then let me explain it to you : I can change whatever i want in it. All of it if I like to.
Ah yeah, and i almoust forgot ... please read this
http://forum.xda-developers.com/showpost.php?p=1241040&postcount=1
It's been there from day 1, just made it bigger now, so that you can see too
And next time, keep your opinions to yourself. No need for public -> "Ooh, look at me how tough I am ! " stunts.
....

whether you like it or not...
I'm confused by people who choose to post cooked ROMs in a public forum, invite people to use and comment, but them complain if the feedback it not all roses and accolades.
You may have done this for free, and many if not most, appreciate your time and effort. That being said, some have legitimate complaints and are posting them because they have experienced problems with your ROM. I’ve been reading your reaction to any negative feedback and you are highly defensive, never conceding that there may be issues to address.
All cooks say that you are not responsible if the ROM bricks someone’s device or if they have problems, and no one has asked for you to pay for their repairs or replace their devices.
There is no place for foul language or insults in such a forum. It's childish and may simply help support the complainant’s point.
If this is your reaction to complaints, then yes do us all a favor and stop posting and keep your work for your personal enjoyment and benefit.
If you can't stand the heat, then get out of the kitchen. No pun intended.

Well if it doesn't work for you then try a different ROM. I tried all the ROMs and pretty much gonna stay with Faria The Real Thing
I tried Xplore 1.0 and i had alot of troube so I dont think im gonna try 2.0. If it works dont change

Funny thing is I have flashed this ROM to my wizard 6 times, and each time something else didn't work. But let me explain...
I want a stripped version of windows, I don't do any messaging at all. And since the Explorer ROMS are known for their stability, it seemed a logical choice. So I have been using package tools, to create packages with option.XML files for each package so you can choose, what parts of the OS get installed.
But back to the point...
Each time I flashed something went wrong... Something I did, a "tmail not found warning when activesync starts", to once I got a 260(?) error once when flashing at 63% so I started it while holding the voice command button. It booted into Bootloader, I flashed it to Cingular 2.25.11 and immediately flashed back to the same ROM successfully.
There are hundreds of people Ecstatic with the Xplorer ROMs, for each one of you here complaining. I for one would think it a travesty, for a few unappreciative people to ruin it for hundreds of others. By pissing off one of our cookers. Maybe had you posted your problems here we would have been able to help you.
But please don't be so accusing, just read, and if you can't find an answer. Then ask nicely, and thank the cook for the time he spends cooking for us! If you don't like the answer you get or you decide you don't like this ROM try one of the many others...

G Tablet coming tomorrow...would like to get some things set straight. Thanks.

Hey all,
I'm getting my G Tablet tomorrow and I'd just like to get some things clarified.
I know, the first thing some will say is USE SEARCH! Well, I did - and that's actually why I just want to get some things straight before I go down the path of modifying the device software. See, reading it all has managed to confuse me more than help me get a definitive instruction set for forging ahead.
I'm seeing the update "****s on CWM" according to a user...and then a 'fix' for that. Than I see that Gapps causes FCs for some, while it works for others. So...yeah, a little back and forth on what to do and who's instructions to follow.
Alright, so first thing's first....Should I flash the Clockwork Mod that I'm seeing available - 0.8? or is there something else I should consider or that I've missed? or maybe wait for a newer version? Should I even flash CWM if I get the newest (and I WILL be getting the newest) S/W version? Are there any downsides at all to flashing CWM on there in terms of messing with OTA updates, etc?
I read this:
"All the ROMS use a standard firmware updater that can be used by non-technical users. Here is an explanation on how it works:...."
Sooo, does that mean I can live without CWM? If an update doesn't work for some reason, will I be able to fix it or overwrite it somehow if I can't get into the tablet at all from the tablet itself? I read something about going into APX mode and putting things on through Windows, is this an infallible method?
Second of all, I read the FAQ thoroughly (I think and hope) but I'm still not 100% on what Gapps to DL or how to put a working Android Market on there especially with this new S/W update. I've seen how to 'fix' the Market to see missing apps, but not how to actually install it on the G Tablet. I may have missed that post somewhere on here.
I'm also unclear if I should get Gapps or not at all, as I've read that some have FCs on there while others do not - so what's the general consensus in light of this update that was just released as of Dec. 21, 2010?
Ultimately, here is what I'd like from my GTab:
I'd like to run the new official Tapn'Tap released recently first and foremost.
I'd like to have the official/unofficial (w/e) Google Market.
I'd like to run Google Apps (Gtalk, Gmail, etc.).
IF I don't like Tapn'Tap, and this is a worse case scenario situation, as in if I HATE TnT - I'd like to have the option to slap something else on there and I'd like to make sure I don't brick my Tablet. Whether that means storing an original official TnT ROM or whatever.
Point me in the right direction please, especially considering things may have changed as of the new S/W update.
Thanks much and sorry for all the questions. I assure you I used search and I attempted to put it together on my own. It's been a long time since I've modded (G1 was the last time) and I don't do it often. Also, apologies if I posted this in the wrong section....I considered posting it in Dev. section but this one seemed better suited.
Thanks again, XDA rocks.

Neoprimal said:
Hey all,
I'm getting my G Tablet tomorrow and I'd just like to get some things clarified.
I know, the first thing some will say is USE SEARCH! Well, I did - and that's actually why I just want to get some things straight before I go down the path of modifying the device software. See, reading it all has managed to confuse me more than help me get a definitive instruction set for forging ahead.
I'm seeing the update "****s on CWM" according to a user...and then a 'fix' for that. Than I see that Gapps causes FCs for some, while it works for others. So...yeah, a little back and forth on what to do and who's instructions to follow.
Alright, so first thing's first....Should I flash the Clockwork Mod that I'm seeing available - 0.8? or is there something else I should consider or that I've missed? or maybe wait for a newer version? Should I even flash CWM if I get the newest (and I WILL be getting the newest) S/W version? Are there any downsides at all to flashing CWM on there in terms of messing with OTA updates, etc?
I read this:
"All the ROMS use a standard firmware updater that can be used by non-technical users. Here is an explanation on how it works:...."
Sooo, does that mean I can live without CWM? If an update doesn't work for some reason, will I be able to fix it or overwrite it somehow if I can't get into the tablet at all from the tablet itself? I read something about going into APX mode and putting things on through Windows, is this an infallible method?
Second of all, I read the FAQ thoroughly (I think and hope) but I'm still not 100% on what Gapps to DL or how to put a working Android Market on there especially with this new S/W update. I've seen how to 'fix' the Market to see missing apps, but not how to actually install it on the G Tablet. I may have missed that post somewhere on here.
I'm also unclear if I should get Gapps or not at all, as I've read that some have FCs on there while others do not - so what's the general consensus in light of this update that was just released as of Dec. 21, 2010?
Ultimately, here is what I'd like from my GTab:
I'd like to run the new official Tapn'Tap released recently first and foremost.
I'd like to have the official/unofficial (w/e) Google Market.
I'd like to run Google Apps (Gtalk, Gmail, etc.).
IF I don't like Tapn'Tap, and this is a worse case scenario situation, as in if I HATE TnT - I'd like to have the option to slap something else on there and I'd like to make sure I don't brick my Tablet. Whether that means storing an original official TnT ROM or whatever.
Point me in the right direction please, especially considering things may have changed as of the new S/W update.
Thanks much and sorry for all the questions. I assure you I used search and I attempted to put it together on my own. It's been a long time since I've modded (G1 was the last time) and I don't do it often. Also, apologies if I posted this in the wrong section....I considered posting it in Dev. section but this one seemed better suited.
Thanks again, XDA rocks.
Click to expand...
Click to collapse
I don't know how much direction pointing I can do but here goes..
Clockwork mod in my opinion is a necessity. Version 0.8 is the best one for most people because of how it deals with the memory locations. Yes, you can do things without it. The update process is as simple as putting an update.zip file, and a recovery folder with a command file in it on an sdcard and holding the vol + button while hitting power. It is easy. Clockwork has a lot of little features though that make life easier. You can make a complete system backup with it. You can install updates, and new firmware with it. You can completely lock up your tablet and using clockwork and your backup be back in business in about 3-4 minutes. You can load new roms and if you hate them you can go back to your old working stuff in minutes. Yes, there are ways to make one of these tablets work again when they get stuck. I don't think anyone has actually bricked one. Some may think they have, but I doubt it.
Unless you are dead set on wanting the stock TnT interface the easiest way to get what you want is to load one of the roms. Yes, there are ways to get most of it without loading a new rom. Most everyone that has gone the I have to stay stock but want all the mods has eventually just loaded a rom. TnT3.0 is based on the latest stock stuff. It has the market, flash, etc. already in it. VegaN is what I use mostly but they are both stable and fast.
Before you flash something brand new that just came out I would read about it and see what others have to say about issues. It usually only takes about 30 minutes until you can tell if it is going to be good or not.
All of the roms for this tablet have there own little quirks. The stock has gotten better with each update but it still is not as good as the ones I named.
Finally.. This tablet is very easy to play with. It is pretty much unbrickable. Anything you can possibly break one of us has probably already broken before and fixed. There are some people that seem to have problems doing every little thing. Most don't. So I wouldn't let any of it scare you off because none of it is that hard.
With a little bit of searching almost everything you may want it to do can be done. I really love mine, and when I got it almost 2 months ago I hated it...

"Finally.. This tablet is very easy to play with. It is pretty much unbrickable. Anything you can possibly break one of us has probably already broken before and fixed. There are some people that seem to have problems doing every little thing. Most don't. So I wouldn't let any of it scare you off because none of it is that hard."
"Sigh" of relief. Then I'm not too worried. As I said I've dabbled in modifying my G1 and it is mostly cake. But I've just been seeing conflicting posts on whether cwm works with the newest official tnt release or not so I wasn't sure what to do.
Thanks for your advice. And when I said pointers, I meant like this as well as pointing me to any posts I may have missed on how to do whatever. Though I THINK I found most of them.

Neoprimal said:
"Finally.. This tablet is very easy to play with. It is pretty much unbrickable. Anything you can possibly break one of us has probably already broken before and fixed. There are some people that seem to have problems doing every little thing. Most don't. So I wouldn't let any of it scare you off because none of it is that hard."
"Sigh" of relief. Then I'm not too worried. As I said I've dabbled in modifying my G1 and it is mostly cake. But I've just been seeing conflicting posts on whether cwm works with the newest official tnt release or not so I wasn't sure what to do.
Thanks for your advice. And when I said pointers, I meant like this as well as pointing me to any posts I may have missed on how to do whatever. Though I THINK I found most of them.
Click to expand...
Click to collapse
The new release overwrites clockwork. But it is not hard to put back. Always a good idea to copy the clockwork backups folder to your pc, or somewhere they won't be lost. The custom roms typically leave the recovery image alone and can be installed with or without clockwork by either extracting the zip contents for stock recovery, or installing it as is in clockwork.

Sprdtyf350 said:
Finally.. This tablet is very easy to play with. It is pretty much unbrickable.
Click to expand...
Click to collapse
I can vouch for that. Erased system, boot, data and cache in preparation for a new ROM. Accidentally rebooted and couldn't get into recovery. Booted it into APX mode, flashed stock and was on my way.

I would just run ZRoot, then upload the TnTLite 3.0 recovery and update.zip and then do the recovery mode process. You should have a microsd handy just in case it doesn't work, but so far I haven't needed that.
This tablet is much easier to work with and very forgiving since VS never took the time to lock down the bootloader etc like Motorola did with my Droid X. You really shouldn't fear changing files out etc, provided you're getting a ROM from one of the people providing them here. If you can press and hold two buttons at once, you can make your gTab an awesome little tablet. It benchmarks about 1000 points higher than my Droid X on quadrant. Can't wait to see what these guys can do with Gingerbread.

Sprdtyf350 said:
The new release overwrites clockwork. But it is not hard to put back. Always a good idea to copy the clockwork backups folder to your pc, or somewhere they won't be lost. The custom roms typically leave the recovery image alone and can be installed with or without clockwork by either extracting the zip contents for stock recovery, or installing it as is in clockwork.
Click to expand...
Click to collapse
It is also not hard to alter the update so that it does not overwrite clockwork.
Open update.zip
Find updater-script, Open in notepad++
Remove the line that references recovery.img
Flash update

hogasswild said:
I would just run ZRoot, then upload the TnTLite 3.0 recovery and update.zip and then do the recovery mode process. You should have a microsd handy just in case it doesn't work, but so far I haven't needed that.
This tablet is much easier to work with and very forgiving since VS never took the time to lock down the bootloader etc like Motorola did with my Droid X. You really shouldn't fear changing files out etc, provided you're getting a ROM from one of the people providing them here. If you can press and hold two buttons at once, you can make your gTab an awesome little tablet. It benchmarks about 1000 points higher than my Droid X on quadrant. Can't wait to see what these guys can do with Gingerbread.
Click to expand...
Click to collapse
with the new update however does the z4root still work? i heard it may not anymore. just curious also since im hopefully getting mine on sat for xmas

rothnic said:
It is also not hard to alter the update so that it does not overwrite clockwork.
Open update.zip
Find updater-script, Open in notepad++
Remove the line that references recovery.img
Flash update
Click to expand...
Click to collapse
Thanks for the info Rothnic! I had already flashed it before I figured out it removed Clockwork. Learning new stuff every day is good... Thanks..

dragonfly1113 said:
with the new update however does the z4root still work? i heard it may not anymore. just curious also since im hopefully getting mine on sat for xmas
Click to expand...
Click to collapse
The very first time I rooted, I used ZRoot and installed 2.4.0. I didn't change anything and used the exact same process of simply copying over the 3.0.0 files over to the root directory of the internal memory and did the recovery procedure (vol+ and pwr keys). It worked like a charm.

hogasswild said:
The very first time I rooted, I used ZRoot and installed 2.4.0. I didn't change anything and used the exact same process of simply copying over the 3.0.0 files over to the root directory of the internal memory and did the recovery procedure (vol+ and pwr keys). It worked like a charm.
Click to expand...
Click to collapse
Ok cool, thanks cant wait for my g tablet hopefully sat morning

I think you'll like it a lot. I also own an iPad. While they are similar they are also a little different. Merry Christmas!

hogasswild said:
I think you'll like it a lot. I also own an iPad. While they are similar they are also a little different. Merry Christmas!
Click to expand...
Click to collapse
my mom has an ipad and my dad could only buy it while i was on my honeymoon bc he knew i wouldnt approve of an apple device in the house haha.

rothnic said:
It is also not hard to alter the update so that it does not overwrite clockwork.
Open update.zip
Find updater-script, Open in notepad++
Remove the line that references recovery.img
Flash update
Click to expand...
Click to collapse
My device hasn't come yet (damn you FedEx!) but I'm eagerly awaiting it.
My plan:
Unbox, start it....do a factory reset from the getgo if it has enough juice.
Set it back up. Charge it to full. If whatever comes on it is as unbearable as I've seen in on Youtube - start modifications.
Will CWM install on it AFTER I do the update if it's available to me? I've seen that the update messes with it if it's already there - but noone's mentioned putting it on there after the fact. I may just go that route for simplicity sake.
Thanks for this!, and thank you all for chiming in with your experience. I feel much better about just getting my hands dirty in it all. I had wrote something to someone yesterday about jumping in and just doing it, but when it comes to dealing with it yourself it can be a daunting task - especially when it still has that new smell, lol. Anyway, thanks again. You guys really rock.
Will stop back later on after I've done my thing

I think they are both nice devices. There are trade off for both of them. I think the screen on the iPad is wonderful, where the gTab's is okay. But the gTab has a forward facing camera, you can print from it, and you can modify it fairly easily too.

Sprdtyf350 said:
Finally.. This tablet is very easy to play with. It is pretty much unbrickable.
Click to expand...
Click to collapse
...famous last words...
Seriously though...trust the directions from the great devs like roebeet. Follow their instructions word for word. You can switch ROMs and then flash back if you want. No worries...

Off topic!
Well...disappointment! Fedex had my package out for delivery at 8am and at 8pm, they're not here. This is why I like UPS, they show up at my door on the day of delivery, no exceptions - they have shown up at almost 9pm before. The Archos 101 I got was sent out at 8am as well but got here at 1:30pm - I suppose that was before the holiday rush.
Checking the details of my tracking I'm seeing a "delivery exception" at 7:30pm (I guess it was time to get back to the facility so they can clock out by 8pm?) and upon calling them I get a somewhat stumbling but polite CS who tells me the delivery went out "late" - upon which I asked if 8am was considered late, especially from a distribution facility WITHIN the same zip code as I am, and all he could say was "Very sorry about this".
Aaaanyway....I guess it will be tomorrow before I can report my adventures.
Think I'll be able to get my $3.99 back from Amazon? I have Prime and with that the package would have come tomorrow anyway. Basically my $3.99 is wasted. Imagine if I didn't have Prime though? Whew.

ima_UNC_fan said:
...famous last words...
Click to expand...
Click to collapse
If you can figure out how to brick it you will probably get an award.. It won't be a good award but probably one of those top ten dumb things people do awards. So far unless you plug the motherboard into a wall socket no one has bricked one. May think they have, but like I said before I doubt it..
And your right.. If it can be done, someone eventually will figure out how. And then we will all laugh at them.. At least I will

I finally got the G tablet tonight and...alright, don't flame me for this - but I don't see what all the complaints about the screen being horrendous or the device being molasses slow are about?
I don't know how people are trying to view it...but when looking at it or setting it on a stand to watch media, I'm not seeing any problem with the viewing angles. It's about the same as my laptop so I watch it the same way.
It's not even a 1/4 as slow as the stuff I've seen on Youtube or in some of the review videos I've seen around the net. I haven't gotten a single FC. Granted, I haven't put in a SD Card yet so maybe problems will start then?
I guess I should note, the very first thing I did was did a factory reset. Then I hooked it up to Wifi and got the 3053 update. I'm one of those who will be waiting for the 'official' update on the 24th.
I set up the time and date, restarted and everything works. I haven't installed flash yet (don't need it that much) and stuff that I DO want on there right now works fine (skype, pandora, fring, dropbox, evernote). I'm slowly figuring out a list of what I want/need from my Mytouch 4G to port to the VS GTab. Figure I don't really NEED Gtalk, Gmail on there because I have these on my phone AND PC - do I really want them making noises all around my home on 3 devices? I was concerned about getting the Google Apps on but now I'm finding I really don't need them. So it seems to me this will be a matter of learning to separate what I need on a tablet vs. my phone - I was of the mentality that I should just get whatever's on my phone on the tablet, this is something others apparently do as they seem to want everything that's on their phone, on their tablets as well.
I personally don't see the point in that. Had I had the Google Market, that would have escaped me as I'd have used Appbrain to just get my motherload of apps from the MT4G to the GTab. Not having it has slowed me, and now I get to re-evaluate before I do grab apps for it.
Now I just have to merge/convert my HTPC into a NAS device as well and find an app that will allow me to DLNA stream media from it and I'll be in mobile heaven.
I haven't had my wifi drop at all anywhere in my home and I've marched all over with it (I use full Wifi N, no G compat. so maybe my range is wider?). Tried email, etc. to replicate crashes and force closes but haven't so far. No surfing issues. I DID find that one app got 'stuck' being downloaded and I had to delete the file before the 'downloading' icon would go away, even after restart.
Maybe the trick to getting a workable GTab in the first place is to factory reset it before first use? Iunno. Things may change and issues may pop up the more I use it and as time passes - but so far, so good!
Again, I can't thank XDA enough for the advice and info. I've found and been given.

Sprdtyf350 said:
If you can figure out how to brick it you will probably get an award.. It won't be a good award but probably one of those top ten dumb things people do awards. So far unless you plug the motherboard into a wall socket no one has bricked one. May think they have, but like I said before I doubt it..
And your right.. If it can be done, someone eventually will figure out how. And then we will all laugh at them.. At least I will
Click to expand...
Click to collapse
I figured it out. Accidentally hit one of the devkit nvflash .cabs and boom

[HELP] What do I do now? Captivate dead.

Yessss another dead captivate thread.
I think I'm gonna go die now.
I followed the video guide to install a custom ROM, in the development thread to the letter, and now my phone wont even turn on... (now that im thinking about it, I think I may have left the debugging mode OFF before I went to flash back to stock, maybe thats why?)
I got into download mode, plugged the phone into odin3 JF6 one click, it started and at some point during the process it said "removed" even though I didnt touch anything, and then i got a weird msg saying my device is not recognized, keep in mind the drivers were installed properly, and I had everything double checked before i flashed....
wtf do I do now? Cant boot at all or go back into download mode. this is my third galaxy, got it two days ago ffs.

My only 2 suggestions. Go to the Dev section and in the guides there is a method to make a USB Jig without solder or anything. You're out like $1 if it doesn't work.
Also, what rev is your phone? There's been some threads started saying the newer Rev phones, maybe 1010 and up crap out using normal One-click. Do check your rev level under the battery and do a search of the forums. I know I have seen the threads.
good luck.

1 reboot pc
2 use different usb ports (direct to motherboard)
3 open odin first as administrator
Sent from my GT-I9000 using XDA App

bobbylx said:
My only 2 suggestions. Go to the Dev section and in the guides there is a method to make a USB Jig without solder or anything. You're out like $1 if it doesn't work.
Also, what rev is your phone? There's been some threads started saying the newer Rev phones, maybe 1010 and up crap out using normal One-click. Do check your rev level under the battery and do a search of the forums. I know I have seen the threads.
good luck.
Click to expand...
Click to collapse
I'm not sure if I was looking at the right place, but I think its 10.12. I'll do a search and see what comes up, thanks for your help.
JayPhill89 said:
1 reboot pc
2 use different usb ports (direct to motherboard)
3 open odin first as administrator
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I'll try that, thanks.

Open Odin first then,
1. Remove your battery for 30 seconds, remove external SD card and SIM card
2. Reinsert battery.
3. Hold down both volume buttons and while holding them down plug the phone in.
It should get into download mode then. I bricked my phone and it wouldn't boot up at all and this worked for me.
On a side note, I have not had much luck flashing or doing much of anything on Windows 7 64 bit. I would suggest trying it on an XP machine if you have access to one.

G.Hook said:
Open Odin first then,
1. Remove your battery for 30 seconds, remove external SD card and SIM card
2. Reinsert battery.
3. Hold down both volume buttons and while holding them down plug the phone in.
It should get into download mode then. I bricked my phone and it wouldn't boot up at all and this worked for me.
On a side note, I have not had much luck flashing or doing much of anything on Windows 7 64 bit. I would suggest trying it on an XP machine if you have access to one.
Click to expand...
Click to collapse
I've tried every possible key combination out there and nothing works. I think my best bet is a Jig, unfortunately the source didnt have any transistors in stock so im SOL for now.

Use JIG ... It will be your last help.

Use it as a paper weight.

If you look up samsung captivate jig on ebay you will find some pre built. I bought one not long ago just to have and it works just fine.
I hope this helps. Best of luck to you.
Sent from my GT-I9000 using XDA App

Sounds like you are a victim of the one size odin fits all debacle. You will indeed need a jig to recover and then you must use odin to flash jh2 or later firmware to your phone. Unfortunately, most guides still direct people to flash jf6 even though your situation comes up on a regular basis.

Check out this link for a jig. And there is a video to show you how to build one. Or mobiletechvideo guy sells them for 17 bucks.
http://forum.xda-developers.com/showthread.php?t=889128&highlight=usb+jig
Sent from my SGH-I897 using XDA App

newter55 said:
Sounds like you are a victim of the one size odin fits all debacle. You will indeed need a jig to recover and then you must use odin to flash jh2 or later firmware to your phone. Unfortunately, most guides still direct people to flash jf6 even though your situation comes up on a regular basis.
Click to expand...
Click to collapse
It seems to me like there's consistent irregularities with the entire process, its not uniform at all, which is very frustrating, every one faces different problems, and the solution is never the same.
Anyways, I went out and bought 3 resistors, turns out they were the wrong ones, I found out the colors werent the same of what I needed, but then that just goes to show you how difficult it is, its partly my fault i got the wrong ones, but someone like me who doesnt know much about hardware hacking, walks into an electronic store, faced with several options, is some times lost.
Oh well, I could've fixed it, had I got the right resistors, but then again, who was going to guarantee I wasn't going to kill it again, for the exact same reason I mentioned in the first post, because I need to consider a few things here, first and foremost, that I have a rogers branded device, and these are the ATT forums.
I called rogers and a replacement has been placed, I should be getting it by friday, or tomorrow if im lucky, with whatever comfort that brings, I still have several concerns, and now that I've basically rendered 3 devices to "almost" none-working condition (this one being an exception because I can "possibly" fix it) I'm not even sure how far I want to go.

rsnt said:
It seems to me like there's consistent irregularities with the entire process, its not uniform at all, which is very frustrating, every one faces different problems, and the solution is never the same.
Anyways, I went out and bought 3 resistors, turns out they were the wrong ones, I found out the colors werent the same of what I needed, but then that just goes to show you how difficult it is, its partly my fault i got the wrong ones, but someone like me who doesnt know much about hardware hacking, walks into an electronic store, faced with several options, is some times lost.
Oh well, I could've fixed it, had I got the right resistors, but then again, who was going to guarantee I wasn't going to kill it again, for the exact same reason I mentioned in the first post, because I need to consider a few things here, first and foremost, that I have a rogers branded device, and these are the ATT forums.
I called rogers and a replacement has been placed, I should be getting it by friday, or tomorrow if im lucky, with whatever comfort that brings, I still have several concerns, and now that I've basically rendered 3 devices to "almost" none-working condition (this one being an exception because I can "possibly" fix it) I'm not even sure how far I want to go.
Click to expand...
Click to collapse
My first captivate went fubar within my 30 days and I damaged the nv_data.bin on my second captivate and was stuck with the test IMEI. Samsung fixed my second one for free. Now I'm at the point where I'm totally sure about what precautions I need to take to keep me out of trouble but I'm not sure if I want to risk it again, heh.
The cheap jig does work. It helped me when I accidentally unplugged my phone during an odin flash.

Yes, you make a good point. You will find that most of the guides are written by people like myself who have an early revision or a phone from the initial release. For most of us, from what I've read and experienced, our phones are really hard to brick, ie, button recovery always works, odin one-click works, etc.
I honestly don't know all the differences now between revs. The first hiccup was the phones missing button recovery/download, and now it seems that people are having issues using the Odin One-click that we have been using for months.
I would recommend with your next phone check the rev or manufacture date, then search the forums for people with similar or same revs that have been successful at flashing and find out what they did.
good luck

@bobby
I wasnt trying to diminish the help that the guides provide. The work that went into creating them is certainly appreciated. The problem arises when so many people just tell newcomers to flash with x version of odin without considering the changes that have occured in the newer builds.
Sent from my Liquid Metal using XDA App

newter55 said:
@bobby
I wasnt trying to diminish the help that the guides provide. The work that went into creating them is certainly appreciated. The problem arises when so many people just tell newcomers to flash with x version of odin without considering the changes that have occured in the newer builds.
Sent from my Liquid Metal using XDA App
Click to expand...
Click to collapse
I agree with you completely. I tend to take it for granted that button recovery works for me and that good old odin one-click does too. It seems we need to start collecting data and making new guides.
Something like,
If you have rev, 1006, 1007,1008 go here,
If you have rev 1009 to 1012 go here,
etc.

latest update,
Two cables, and six resistors later, my phone won't go into download mode, lol, I'm not even sure I did things right, I'm gonna try stripping the same cable, used in one of those videos on how to make a jig, I still have three extra resistors.
I'm starting to think its because of it being with rogers. im gonna search the forums.

A micro usb breakout board is the simplest method for constructing a jig.

Wow, I guess I'm lucky that the used Captivate I picked up for my gf is an older one at 1007. Root procedure for her went without a hitch.
From stock rom, all set up and in daily use, WITHOUT ROOTING first.
Put clockwork update.zip on her sdcard.
Reboot into recovery.
Reinstall packages twice to get into clockwork recovery.
Wipe data/factory reset.
Flash Cognition.
Profit.
She's been using it this way for two weeks and loves it so much more than stock.
What was so complicated about the procedure you followed? Or was it the same as this but it just didn't work?

rsnt said:
...and now that I've basically rendered 3 devices to "almost" none-working condition (this one being an exception because I can "possibly" fix it) I'm not even sure how far I want to go.
Click to expand...
Click to collapse
I think you may have a good point. Eventually your carrier will stop replacing bricks for you. If you still have the inclination to play with flashing, investing in a jig would definately be a wise investment and if I were in your shoes, I wouldn't flash anything without one. I made a jig for myself before I ever flashed anything but luckily I have never had to use it, probably because I took the time (about a month and a half of trolling around here reading.) to research what all was involved with what I was about to jump into. Just something to consider in case you want to try again. Good luck!

Trying to restore with Odin killed my phone

Actually, not my phone but a friend's. I was trying to restore it to stock with Odin in order to flash Cyanogen, however Odin was being a real PITA. Through numerous attempts, Odin would refuse to finish the restoration process, often hanging at sbl.bin or Setting PIT file. I tried at least ten times to get it to flash correctly. The final time I decided to let it sit overnight and flash, just in case. When I got up this morning though, it was still hung up. I unplugged the phone and pulled the battery like I had done multiple times the night before, so that I coould give it one last try before I went to work. But this time, the phone wouldn't go into download mode. I had been using the USB and 3 button combo method, but nothing this time. The phone shows no signs of life at this point, and I really don't have anything short of a JTAG left to try on it. Now I have to buy my friend a new phone.
Has anyone else experienced this kind of terrible performance from ODIN? And is there anything other than JTAG I can try. If there is someone out there that can fix it with JTAG, I would also pay money for that. I don't have the soldering skills necessary to fix this thing.

They sell the pre made jigs you can buy, just search for it and you will find plenty
Sent from my SGH-I897 using XDA App

The battery doesn't charge in download mode, the battery could very well just be dead. Pull the battery, reinsert it and plug in the phone to charge it, if all it does is get really hot and never shows any sign of life that is a brick. Check your PM.

super coffee said:
Through numerous attempts, Odin would refuse to finish the restoration process, often hanging at sbl.bin or Setting PIT file. I tried at least ten times to get it to flash correctly.
Click to expand...
Click to collapse
Can't really blame anyone but yourself for that one.. If it hung at sbl.bin and you managed to not brick it, you dodged a bullet.
Anyway, sounds like you dodged several bullets and then the inevitable happened. A jig won't help, and you're correct in your assumption that JTAG is your only way out. Fortunately for you, one of our fellow captivaters is still offering (at least to my knowledge) a free JTAG service. You should contact him to see if he'd be willing to restore your device, his name is connexion2005.
For future reference, don't flash back to stock unless you really need to. And when you do, don't flash an image that includes bootloaders. If you have bootloaders that work (3 button combo enabled on 2.2- bootloaders or 2.3 bootloaders), use a non one-click odin with an image that doesn't include sbl.bin or boot.bin; otherwise you're just taking unnecessary risks.

little8020 said:
They sell the pre made jigs you can buy, just search for it and you will find plenty
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
I got one off eBay for 10 bucks. Probably the best investment I've made as I have encountered about every brick situation you could imagine.

This may sound stupid, but maybe trying to flash GB bootloaders with ODIN(not one-click) could work? Exhausting all options before sending your phone in or having somebody JTAG would be preferable.

+1...they are well worth the money if you do any ROM flashing!

I have same problems before. 3 button combo method didn't work at all. No JTAG at that time.
When you plug your phone to computer, make sure it still can detect "SAMSUNG Android USB composite Device", but not "Unknown devices".
Even I wasn't on download mode or recovery mode, the odin able detect my phone as COM port then I was using Odin3 v1.8. then I put "galaxys-bootloader-JVB.tar.md5" to bootloader since I already have 2.3.3 rom before.

Another "dad, my friend has this problem" thread!?

For future reference, use Heimdall and read instructions thoroughly and multiple times. I just started using Heimdall when I made my move to flash gingerbread again when the KF1 ROM came out and I love it. Regardless how well a program works though, it's only as good as the person operating it. There are TONS of people here far more educated than me when it comes to flashing anything, but I have never bricked, or soft bricked even (yet) and I flash a decent amount.

If all else fails, I did have good luck with Josh @ mobiletechvideos (haven't posted enough times to be allowed to post the link, but he's on youtube. He's also here as connexion2005) he was able to unbrick my phone for $50. The post office does not seem to like to deliver mail from him to me, but I'm typing this on the phone he unbricked.
Sent from my GT-I9000 using XDA App

Josh @ mobiletechvideos rocks!
He unbricked my Captivate!

There is not a problem with odin! Why do people always say don't use odin because it will brick your phone. You have to use it correctly. Make sure before you even open odin that the computer recognizes your phone and you have all of the correct drivers, etc. installed BEFORE even messing with odin. Also be sure to connect to a usb port that is connected to your hard drive to limit the chance of the computer not recognizing your device.

megatronisabeast said:
Also be sure to connect to a usb port that is connected to your hard drive to limit the chance of the computer not recognizing your device.
Click to expand...
Click to collapse
Your hard drive has usb ports?
You mean motherboard?

cappysw10 said:
Your hard drive has usb ports?
You mean motherboard?
Click to expand...
Click to collapse
Yes, the motherboard! Was in the middle of a tech class when I posted that! Guess I can't multi task! Thanks!

Thanks for the feedback guys. I'm here when you need the impossible done to your Captivate...

megatronisabeast said:
There is not a problem with odin! Why do people always say don't use odin because it will brick your phone. You have to use it correctly. Make sure before you even open odin that the computer recognizes your phone and you have all of the correct drivers, etc. installed BEFORE even messing with odin. Also be sure to connect to a usb port that is connected to your hard drive to limit the chance of the computer not recognizing your device.
Click to expand...
Click to collapse
I've had odin fail a few times in a row on me when flashing gb bootloaders for i897. I had odin flashed countless times on multiple devices and computers. I'm pretty sure Odin isn't foolproof. Not everything can be contributed to pebcak, although the vary majority of problems posted on xda are...

kimchi0400 said:
I've had odin fail a few times in a row on me when flashing gb bootloaders for i897. I had odin flashed countless times on multiple devices and computers. I'm pretty sure Odin isn't foolproof. Not everything can be contributed to pebcak, although the vary majority of problems posted on xda are...
Click to expand...
Click to collapse
everytime odin has 'failed' for me, it's been a user error on my part. you need to follow the steps sequentially otherwise you have a higher probability of failure/brickage.

rmal0 said:
everytime odin has 'failed' for me, it's been a user error on my part. you need to follow the steps sequentially otherwise you have a higher probability of failure/brickage.
Click to expand...
Click to collapse
I honestly think that a lot of information here on XDA is only partial and this will get some into trouble. I know people say "search for it, it's here" and it is but the problem is that 10% of the time the information that someone is looking for is buried in a thread and the other 90% the search results list the same question being asked and answered with "it's here search" or "Did you search??"
There honestly should be posting guidelines, for everyone, I mean people take all the time to write disclaimers why not proper directions? Is there a standard Template? If I'm missing it please feel free to point it out.
For example:
This is a 9000/897/896 based ROM
This ROM needs the following bootloaders: ....
This ROM contains Bootloaders: Yes/No
This ROM will change your product code: Yes/No
This ROM requires a Davlik wipe to work: Yes/No
This Kernel is 9000/897/896 based
blah blah blah.......
If the information is readily and easily available then the amount of "dumb" question should go down dramatically and then there will be a "standard"
But then again it's Android/Linux, being fragmented is half the fun..
</rant>Just needed to vent...

Trying to install Rom

I have the T959v android phone, which I found out is a bit more complicated than my Samsung Vibrant.
I am running the gingerbread kernel after using Kies.
I have finally successfully flashed the T959v using Heimdoll following this guide. http://forum.xda-developers.com/showpost.php?p=21953878&postcount=2
Super User has been installed using SuperOneClick.
After struggling with it and reading on some sites it's possible and some sites it's not possible, I've come to the conclusion that Rom Manager is not a good idea to use, to install a Rom on my particular phone.
I want to install this Rom here: http://forum.xda-developers.com/showthread.php?t=1402966
However I reviewed the instructions and found I was lost on some parts.
I know how to get to recovery mode (with the phone turned off, hold down volume up and down and the power button)
However, here's where I get lost:
6. Perform Voodoo -> Disable Lagfix.
I do not have this option, likely because I'm missing voodoo or some sort of app. I've tried googling this and figuring out what it is, but I don't even know what a CWM is.
I haven't tried (since I'm atleast smart enough to review information before I start following them, lest I get myself stuck somewhere and unable to back out of). However I believe I can get as far as Step 5.
Unfortuantely I can't get any further.
The only apps I have installed (besides the annoying bloatware on the phone) are the ones I listed above.
This is my first time flashing a phone or doing any of the above, previously my friend did it for me.
So I apologize for whatever Incompetence I may have, however if you can simplify instructions I'm pretty good at following them.
The hard part is that I don't know how to do a lot of the instructions.
Is there a video? Perhaps a guide with pictures that includes all the software I need and how to install that software?
I'm sorry for the questions, I hope someone can help. This has been a long and frustrating process but I'm determined to finish it.
Thank you in advance.
Ah also this: "Must have pre-installed kernel with clockwork recovery!"
I cannot do this because when I try and use clockwork recovery it says it cannot support my phone.
It gives me a list of 4 devices, none of which are my phone.
Then I click on "My device is not listed" and it states the T959v is not supported.
I'm really sorry for all the questions.
Not only does this app look nice, and sound nice due to hardware acceleration. Above all it gets rid of that bloatware crap from T-mobile.
I look forward to giving this app a try.

Hello my friend i know how excited you are when it come's to flashing, installing, removing apps on your phone, but before you do any harm to your phone maybe
consider reading this http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_4G before going further. it save's you a lot of time and headache plus you can avoid
flaming from other people here. and also try to use the search bar just i case you have further question's..
I advice you to take some time to read first on what do you want to your phone before doing anything.. don't be in a hurry we have tons of great roms in here..

Do not use clockwork manager...it is not for this device!
If you have super user ur rooted and good to go ...i would suggest you play around with the gingerbread roms for a spell before going to icecream sandwich roms,just so you get a feel for flashing on this device.....i too came from the vibrant and dearly miss it.
This phone is far from a vibrant but is coming along.
Feel free to pm me.....I may be a bit slow on replies since I'm working 7/12's 3rd shift.

Thank you both so much for your replies.
Warren I am checking that link out right now. Thanks
Shortbus, I miss my Vibrant too.
Technically speaking my Vibrant is still usable, but ever since I dropped it and cracked the screen it seems to have drastically slowed down (and the screen is annoying with all the cracks too).
Sad day for me.
I still want to try and get that Rom I had posted above working, as I doubt I'll move to another rom anytime after that. But I'll try and learn more about it using the link you gave me Warren. It'll probably take me several days ~_~
Shortbus I may email you with questions I come across from time to time if that's ok

Squeezitgirdle said:
Thank you both so much for your replies.
Warren I am checking that link out right now. Thanks
Shortbus, I miss my Vibrant too.
Technically speaking my Vibrant is still usable, but ever since I dropped it and cracked the screen it seems to have drastically slowed down (and the screen is annoying with all the cracks too).
Sad day for me.
I still want to try and get that Rom I had posted above working, as I doubt I'll move to another rom anytime after that. But I'll try and learn more about it using the link you gave me Warren. It'll probably take me several days ~_~
Shortbus I may email you with questions I come across from time to time if that's ok
Click to expand...
Click to collapse
If you want to install Valhalla Final - read the guide in the first link of my signature and begin where applicable.

I don't mind.
Flashing roms on this device is easy once you realize its not the vibrant lol.
Like the vibrant....this thing is near impossible to brick,....just a lil bit more complicated than the vib.....till you get to understand it.

lumin30 said:
If you want to install Valhalla Final - read the guide in the first link of my signature and begin where applicable.
Click to expand...
Click to collapse
Ah, so I should switch to Froyo instead of Gingerbread from the looks of it.
I'll get right on that I'm going to try following your guide now
edit: I saw that you switched to Gingerbread, jumped too far ahead of myself.
I'm getting pretty far along in the guide, I'm now at the part where I am about to install the rom.
I love that you guys respond so quickly too.
In the process of using Heimdall I ran into so many issues but was (slowly) able to work through them and figure them out.
It's nice to know I can come here if I have a quick question.

I'm not much help with heimdall....I use gremlin remover,its a one click Odin program....serves the same purpose....to bring you to a rooted stock state.