Related
Hi all !
I'm french and just speak a little english speaking. I'll try to do my better to be comprehensiv.
So,
My tytn II have had the problem with the radio 1.65.17.10 that i couldn't changed. I've had to take the manip with "FrankenKaiser" on the top of subjetcs...
I did all steps and arrived at a new system configured (rom radio and normal rom).
But the problem is, that my signal radio seems to be wery low. I have juste one or two (or zero) levels of the goperator's signal. I live in the center of Orléans, a big city a juste beside of the kaiser, my previous Tytn 1 works perfectly, with all fives levels of signal operator.
I tryed differents normal roms and differents radio roms and it'x the same problem. Le signal of the GPS seems to be low too.
I am actually with on the radio rom 1.64.08.21 and on the v6 thuffir rom.
Could you help me please.
Julien
Did you recently try an external antenna?
no, in fact, i suppose my radio devices too much sensibles, but the gps look work average well.
I used just the year past the gps, it was usable, but my operator signal is too sensible and change too much the valability of the signal. It loose the signal manytimes but find it after very speed...
Curious.
It 'll test manythings and repost my backtest in the evening...
thanks.
Sorry to say, but that radio you have currently tends to be one of the best ones for your region I believe. When the GPS is set to 19200 or 38400 baud you can get a GPS lock in seconds.
yes, i have read some topics goes agree with you...The gps seems to be correct, but for the gprs, phone etc, its too sensible, when i am between walls, i loose the signal very speedly. So before with every other phone it was no loosed. For example just during the past hour i went in a tunnel by car and i never loosed the signal before... strange isn't it ?
juliengourou311 said:
yes, i have read some topics goes agree with you...The gps seems to be correct, but for the gprs, phone etc, its too sensible, when i am between walls, i loose the signal very speedly. So before with every other phone it was no loosed. For example just during the past hour i went in a tunnel by car and i never loosed the signal before... strange isn't it ?
Click to expand...
Click to collapse
yes it is, but did the same to me. the radio seems as if you need a constant internet connections to hold a signal best otherwise it looses it faster. thats why i dont have it anymore.
ok. So which advices can you gives to me?
I'm not sure tu understand, (bad english speaking...^^) , are you saying that that this rom is for a specific use?
For calling do you know an issue concerning me?
The roms you entered is you "info" (that you are comparing) are good roms?
I prefer the 1.65.20.29 of the two and yes I would DEFINATELY recommend
Ok, thanks gye .
I 'll test tomorrow
good night
When sitting in my office at home with my x7510 and HTC TyTN both cradled on my desk it is often the case that the TyTN will be showing a 3G signal whilst the x7510 is only showing an E. I took both to my nearest AT&T store and they were glad to swop out the SIM card on the x7510 for a new one. However, the AT&T system did not recognize the x7510 by reference to the IMEI number, whilst the TyTN was recognized as being a 8525. Consequently my TyTN was listed in their system as a 3G compatible device, but the x7510 was listed as only an Edge/GPRS capable device.
They recommended that I contact AT&T technical on the phone as they did not have the capacity to change the status of the phone locally.
Does anyone know whether it matters what is listed on AT&T's system. In other places (at my work office) I can get a U and sometimes an H on the x7510, but as I type this the TyTN shows 3G and the x7510 just a E, and they are both less than a foot apart and the x7510 is closer to the window!
robjhellis said:
When sitting in my office at home with my x7510 and HTC TyTN both cradled on my desk it is often the case that the TyTN will be showing a 3G signal whilst the x7510 is only showing an E. I took both to my nearest AT&T store and they were glad to swop out the SIM card on the x7510 for a new one. However, the AT&T system did not recognize the x7510 by reference to the IMEI number, whilst the TyTN was recognized as being a 8525. Consequently my TyTN was listed in their system as a 3G compatible device, but the x7510 was listed as only an Edge/GPRS capable device.
They recommended that I contact AT&T technical on the phone as they did not have the capacity to change the status of the phone locally.
Does anyone know whether it matters what is listed on AT&T's system. In other places (at my work office) I can get a U and sometimes an H on the x7510, but as I type this the TyTN shows 3G and the x7510 just a E, and they are both less than a foot apart and the x7510 is closer to the window!
Click to expand...
Click to collapse
What shows in the ATT System does not matter my Athena does not show in the system and I get 3G speeds. Possible that the TyTN has a more sensitive radio? Or maybe the 7510 did not step up to 3g automatically?
actually I'm almost in the same situation as u do, my kaiser gave me about 2 bars of 3G when I'm inside the office at work, but my athena gives me only edge in the same place.
i don't think it's anything wrong with AT&T's network but it's the athena itself. the antena my be a little bit low on sensitivity than the kaiser.
or it could also be a radio issue or a combination of both.
well thinking about it, it could well be a network issue, because would usually get 2 bar edge in the office, i called them up and it went up a couple levels then to engineers and now I'm getting 3 bars edge and sometimes 1 or 2 bars 3G.
If i go by the window or outside and catch the 3G then head back inside it stays a lot lot longer now.
lennie said:
actually I'm almost in the same situation as u do, my kaiser gave me about 2 bars of 3G when I'm inside the office at work, but my athena gives me only edge in the same place.
i don't think it's anything wrong with AT&T's network but it's the athena itself. the antena my be a little bit low on sensitivity than the kaiser.
or it could also be a radio issue or a combination of both.
well thinking about it, it could well be a network issue, because would usually get 2 bar edge in the office, i called them up and it went up a couple levels then to engineers and now I'm getting 3 bars edge and sometimes 1 or 2 bars 3G.
If i go by the window or outside and catch the 3G then head back inside it stays a lot lot longer now.
Click to expand...
Click to collapse
For my Athena I know the radio ROM can contribute to this situation, since I don't have a 7510 is there a radio upgrade for your device? If so it may solve this problem.
No Radio upgrade to my knowledge for the x7510. Lennie to clarify, you did contact AT&T Engineer support and got something done to improve the signal?
Make sure you are using radio rom 1.58. My 3G sensitivity and speeds went up dramatically when I upgraded to 1.58.
Thanks for the input. For clarification the x7510 comes with radio 1.58 pre-installed.
Odd. I wonder if you have a hardware issue. With my 7501, after I upgraded to 1.58 I now get 3G/H signals where I never could before, deep inside a steel and concrete building.
I have the network type and GSM/UMTS band both set to Auto.
Hi guys,
My polaris randomly decided to stop recieving a signal the other day,
it still recieves GPRS data, but no GSM signal, no matter which network etc I select. (No Service Icon.)
First I tried different simcards etc in the phone but this didnt work, I then swapped over the board of the phone, thinking this must solve the problem but it hasnt.. (different Rom, Radio aswell)
Same as before the phone recieves a GPRS signal but no gsm signal. Just the exclamation mark next to the signal meter...
I also tried updating both the ROM and radio on the phone, and the board that I swapped in was from another polaris I had with a cracked screen that was working fine before...
( I used, outer casings from the suspected broken radio phone and the board from the cracked screen phone which had no reception problems.)
What could be the problem guys? Which parts of the phone affect the signal???
( The phone is actually an orbit 2, I have had it running for over a year now on the Mamine rom, and unlocked with Olipro and never had a problem, it also doesnt work with an O2 sim incase anyone suggested it was simlocked or something.)
Cheers,
Dan.
bump- please help guys!
were you moving around? could always be a carrier problem....
if gprs is working ok it's doubtful to be radio rom/hardware
Yeah, it is the same everywhere, just the noservice notification.
Other phones work fine, so def a prob with the phone...
Could O2 have locked the phone for some reason?? It was purchased via ebay, could it have been stolen or something? Would it have had 2 have an O2 signal for O2 to block the phone??
Cheers...
I have a same problem. Firstly, when i turn on my HTC TOUCH CRUISE. It says, no network, than after 5mins, it says, no sim card inserted. Can anyone help me what's the problem?
This problem seems to be popping up a bit around the forum...
Is it with O2 Orbit 2's only?? Could O2 have sent something out blocking some of the handsets via the imei or something?
Is there a solution??
Cheers guys,
biscuitboy said:
This problem seems to be popping up a bit around the forum...
Is it with O2 Orbit 2's only?? Could O2 have sent something out blocking some of the handsets via the imei or something?
Is there a solution??
Cheers guys,
Click to expand...
Click to collapse
I also have strange problems. My Cruise dropped on the floor on a skiing trip last March, and since than it has strange network problems.
It mostly says 'No service', but sometimes (randamly) it says something like 'Searching...', 'Denied,Searching...'
I'm not sure if I translated this correctly, I have a Dutch version of the standard 6.1 ROM. I hard reset, re-flashed to original firmware RUU_Polaris_HTC_NLD_3.13.404.0_radio_sign_25.85.30.07_1.59.42.15_Ship.exe
Since this afternoon it is not connecting at all. No reception at all.
My provider is the Dutch one Vodafone (it shoud say '3G Vodafone NL'). Funny is that the those items are unchecked in the network selection (phone --> network --> select networks), but that seems to be the case with other users as well.
Does anyone has a clue?
Greetings,
Murwin.
Same Problem
My Polaris randomly goes offline and gives the ! mark next to the signal meter. I have tried changing Radio ROM and it makes not difference. I think the problem is with the SIM Card reader. I put some sponge tape over the top of the SIM Card reader so it puts even downward pressure on it and the problem is almost fixed. It still randomly goes offline, but only once a day now. If anyone has had any better luck, please post the solution here.
Thanks
is the cingular 2125 really lacking wifi or is it just software disabled?
The htc faraday dosnt have wifi simply because, the hardware isnt there, there's no wifi chip on the board.
damn that is not very good. i wonder why they decided on not giving it wifi. thanks for your help though.
The space for the wifi chip is there on the motherboard with the label as well. I took a motherboard and LCD from a tornado (T-Mobile SDA usa) and put it in my faraday (Cingular 2125) and it worked fine with zero other modifications...sorry for thr blurry photo
Hello
I have a German T-Mobile branded Touch Pro 2 which has been flashed to the WWE rom (1.86.401.0 build 67102), radio 4.49.25.17, protocol 61.44tc.25.32U.
I seem to be suffering from lousy bluetooth and wifi reception and was wondering if anyone else has had any problems,
For the bluetooth, it will struggle to work with a headset that is more than 3-5 feet away. For the wifi, it will struggle if it is more than 4-5m from the access point (with line of sight).
This is really really poor and I'm wondering if my unit is defective or whether they are all like this?
If it's a problem just with my one, does anyone know what the problem could be? I've seen a disassembly guide, which shows that the antenna module is at the top of the device and is relatively easily removed/replaced. Could it be a bad connection to the wifi/bluetooth antenna? The GSM/3G coverage is fine.
Any help appreciated.
Thanks,
Andrew
I have the same situation with my phone.
Mine is a US unlocked Touch Pro2 flashed with the WWE rom (2.07.401.1 build 80303), radio 4.49.25.88, protocol 61.44tc.25.33U.
Any suggestion?
I broke the screen on my old phone recently and bought a new Touch Pro 2. The new one is fine in terms of reception, so I imagine the first one (and possibly your one) are faulty. If you have the opportunity to return yours and swap it, I'd do so.
I'm going to take the old one apart to replace the screen. If I find out what's wrong with the reception along the way I'll let you know. I suspect the aerial is not properly seated/connected on the contacts on the motherboard.
Andrew
I have tried to troubleshoot my issue thinkin it could be my Altec headset. I paired it with my buddies phone "HTC Epic" and has clear connection for over 80 ft. Not the headset. I can't tell what it could be.
I have an EVO running Calkulin's EViO 2 ROM v1.2
Maybe its not that but not sure if its the Kernal or what.
My Wifi connections rock.