Hello,
It was possible with WM6.5 on HD2.
Now I have install WP7 and when I plug a stereo jack (only 2 rings) the built-in microphone is not active....
Do you have a trick to keep it active?
wrong forum for this question?
jop217 said:
Hello,
It was possible with WM6.5 on HD2.
Now I have install WP7 and when I plug a stereo jack (only 2 rings) the built-in microphone is not active....
Do you have a trick to keep it active?
Click to expand...
Click to collapse
I have a Focus, and when I plug in my phone into my car's aux input using a standard 1/8" stereo to 1/8" stereo cable(only 2 rings), the phone mic does stay on. It does this by default.
Your issue may be related to the hack onto the HD2. You should post this in that forum.
HD2 Windows Phone 7
ok. Thank's
Related
Hello guys and gals,
I have a newbee question for all u gurus out there.... i have a jasjar running wm6 and i was just woundering if there is a way/registry hack to increase the in call volume and the in call speaker phone volume???
I also use my jasjar in my car with a cable that has a 3.5 jack on each side(one end pluged into my jasjar and the other end pluged into my car stereo) and i can listen to music just fine but when a call comes in i can hear the other person but the other person cant hear me at all??? i do have my mic AGC enabled, any ideas as to why this is happening???
Thanks alot u in advance u guys.
Regards,
Farhan
farhanali_ said:
Hello guys and gals,
I have a newbee question for all u gurus out there.... i have a jasjar running wm6 and i was just woundering if there is a way/registry hack to increase the in call volume and the in call speaker phone volume???
I also use my jasjar in my car with a cable that has a 3.5 jack on each side(one end pluged into my jasjar and the other end pluged into my car stereo) and i can listen to music just fine but when a call comes in i can hear the other person but the other person cant hear me at all??? i do have my mic AGC enabled, any ideas as to why this is happening???
Thanks alot u in advance u guys.
Regards,
Farhan
Click to expand...
Click to collapse
i think its obvious....uhhh...where is the mic. mate???
Plugging in a headset like cord (any 3.5) disables the device mic, you need an adapter (search the uni accessories section of the forums).
fallenczar said:
i think its obvious....uhhh...where is the mic. mate???
Click to expand...
Click to collapse
Well i use it with my htc wizard and it works just fine...
now as for the jasjar, the strange thing is that i can use
ms voice command when the cable is pluged in....if the
mic is disabled when the cable is pluged in then ms voice command
shouldn't be able to pick up anything iam saying but it does
Universal/Jasjar
If you connect a jasjar to a stereo jack, you will activate the headset profile on the phone automatically, witch means that you will not be able to use your onboard mic for phone calls, You can always try and use your handsfree's headset wire that came with your phone and modify the wiring on that, if you know how...Cheers
Thanks for all your replys you guys,
Is there a way to deactivate the headset profile when a 3.5 stereo cable is plugged in??? pls let me know
Thanks
farhanali_ said:
Thanks for all your replys you guys,
Is there a way to deactivate the headset profile when a 3.5 stereo cable is plugged in??? pls let me know
Thanks
Click to expand...
Click to collapse
Hi,
Use a mono jack and you will get audio from the car speakers and the Uni will use the built in mic.
It worked fine for me when I first got my Uni, but now I have bluetooth on the stereo, but better.
Cheers,
Beast
Looking for anyone with some ideas.
On my Polaris (Touch Cruise) I connected my move to my car radio using the extUSB splitter for charging and audio, on my polaris I could answer my phone and have the audio come through my car radio using the AUX input but the microphone on my phone would always work. This was perfect for me.
With the Touch Pro, the microphone does not work with the extUSB inserted, sound still works perfectly as before but my only problem is that people cannot hear me. Is there a Reg setting to keep the mic on my phone connected and disable the mic output on the extUSB connector.
I know the Pro has Video Out on the extUSB but this should not affect the mic.
TB
anybody got any idea?
Hi everybody
Is it possible to use the FM Radio without headset on hd2??
change the value in Registry HKLM/System/State/Hardware/Headset value 0 to 1 but i can´t find radioprogramms...
Do you have any idea???
the headset actually is needed because the wire also work as antenna.
So, no headset -> no wire -> no antena.
I don't know if you can change the behaviour with that registry key, but one thing that you can do is short the 3.5mm jack pinouts to simulate the headset.
Otherwise use the wonderful BRadio software.
You will be able to listen to all the radios you want without the headset... directly on the speaker.
Of course it' s streaming, so it means data.
spastik said:
I don't know if you can change the behaviour with that registry key, but one thing that you can do is short the 3.5mm jack pinouts to simulate the headset.
Click to expand...
Click to collapse
If you short the 3.5mm jack, wouldn't be all sound transferred to "headset"?
I tested the radio app yesterday and I found that the radio can be listen through the speaker, but you still need the headset as an antenna.
Just insert a 3.5mm into the HD2, even if it's only the jack.
You have only to make the hardware to recognize that a jack is inserted
Made this on Diamond. It will work even on HD2.
But remember that the headset cable is used even as antenna, then if you don't use any cable but only a jack you'll have a bad reception
Hi,
I bought a simple USB adapter to jack audio, see attached file, to use my Diamond as a mediaplayer.
I can hear a phone call across my car hifi but the built in mic is disabled.
I think that there is a setting in the registry to enable the built in mic, someone can help me?
Thank you
Luigi
If someone find a solution i'm also interesting!!!
I've tried some apps but no-one fonction to activate the mic with this cable.
It occurs because the jack adapter is not officially supported, and Diamond recognizes it as a stereo HF, disables built in mic and is trying to recept sound from HF mic (that is not present).
But yeah, it'd be nice to activate built in mic somehow ...
Where did you buy one of those! Like the name and make of it, but I can also tell you why its not working.
What you bought their is a simple adapter, not an amplifier. (Im sure amplifier is not the right word, but go with me) Basically, if you want it to work you need a device that changes the analog waves to digital waves of the usb, which by looking at that, doesn't do it.
If you're wondering were to get this magical device... well lenovo used to make one that came witha cheap headset.. but they stopped producing it a while ago.
You can buy one of these adapters:
HTC Diamond 3.5mm adapter, with mic
Googling a bit about this, seem to be a very common problem in android devices, not only our port to mini.
Based on the suggestions and comments found in a thread on community.sprint.com, while listening to an mp3, I partially removed and re-inserted the plug but only till the middle of the jack 3,5'' hole. The audio seem to be stereo. The icon in the status bar shows headphones when it's in mono and a headset when it's stereo, but it's very hard to stay with the headset icon
According to someone in the thread, it's apparently due to "impedance" which in non-tech speak means there is circuitry in the phone that is checking to see if you have a headset or headphones plugged in and it's changing the output based on that.
I get full stereo with my original HTC headphones with phone mic!
The problem only happens on audio-only headphones.
This is related with my previous test plugging only the half of the connector.
Look at the two 3,5'' jack: Probably Android is getting the sound from the two rings closer to the wire.
- The HTC headset have three rings, probably use the iner two for both audio channels and outer one for the mic
- Another standard headphones only take the audio from one channel and sound mono
Could be possible to change the source of the channels to the two outer rings?
Toggleheadset is an aplication to change headphones to headset mode. It should solve the problem, but unfortunately doesn't seem to work with froyo
I donwnloaded from the market (toggleheadset2), installed but swithching it of/off don't change anything
The source page:
http://code.google.com/p/toggleheadset2/
Whit my headset Sennheiser px200 3.5 mm TRS Mini-jack (model for iphone first generation) i have no audio problem. (two rings).
techpowerup.com/reviews/Sennheiser/PX_200-II/images/jack.jpg
I'm not 100% sure, but installing this widget seem to solve the problem. The switch on/off don't work but I have stereo now
I installed toogle headset and i think doesn't resolve the problem.
Looks like we have stereo in android only when android detect headset with mic. In other case , we have mono.
Tested with:
Sansung original headset with micro: android detect the micro and i have stereo.
HTC original with micro: android detect the micro and i have stereo.
3 headset without micro : I have mono but if i introduce the headset slowly and android thinks i have micro (The icon change) the sound change to stereo.
Regards
rastahigh said:
Whit my headset Sennheiser px200 3.5 mm TRS Mini-jack (model for iphone first generation) i have no audio problem. (two rings).
techpowerup.com/reviews/Sennheiser/PX_200-II/images/jack.jpg
Click to expand...
Click to collapse
¿wich is your android notification bar icon with this headset ?
cbolumar said:
I installed toogle headset and i think doesn't resolve the problem.
Looks like we have stereo in android only when android detect headset with mic. In other case , we have mono.
Tested with:
Sansung original headset with micro: android detect the micro and i have stereo.
HTC original with micro: android detect the micro and i have stereo.
3 headset without micro : I have mono but if i introduce the headset slowly and android thinks i have micro (The icon change) the sound change to stereo.
Regards
Click to expand...
Click to collapse
maybe that could be tweaked in linux kernel
Thanks -r0bin-
I hope so!
cbolumar said:
¿wich is your android notification bar icon with this headset ?
Click to expand...
Click to collapse
The icon is a headset
RADIO FM Works
To ear FM radio:
Go to WM
Conect your headset ( I tested it with 2 headset with micro: Original HTC and sansung)
Start fm radio in WM
With FM radio on , run haret
Start radio fm in android.
You can heart the FM radio without 5 seconds sound problem.
I think is the same problem as the stereo sound and mayby the fix will be the same.
Regards.