Hi all.
If I have the FM Transmitter connected to the headphone jack on the phone and try to use a Bluetooth headset to make/recieve calls while driving, will this work?
I am concerned that the phone will try to output the sound to the car stereo and that the voice will be picked up by the phones built-in speaker.
Thanks for any help in advance.
If it's a standard headphone adapter, it should be fine, I was able to use my BT headset with a Himalaya connected to desktop speakers, but it might vary with devices.
Best bet is try if you already have a BT headset to connect a normal pair of headphones to it and see what happens, it certainly won't hurt it, and the fact it's speakers, headphones, or FM transmitter is irrelevant as it's just a jackplug audio output as far as the device is concerned.
I don't have the BT headset yet - Going to buy the two said items together, but hopefully it works on the XDA/K-Jam or whatever too.
Thanks for the help
Hi all -
I have an older Audi a4 with the factory Concert/Bose radio. I replaced the CD changer input with one of these:
http://www.crutchfield.com/App/Product/Item/Main.aspx?g=50900&i=581DFVW&tp=1672
This allows me to input audio to my car radio using RCA-type connectors. I then got one of these:
http://www.cablestogo.com/product.asp?cat_id=2009&sku=03178
that lets me plug into a 1/8 jack and send the audio to the RCA jacks. I then got:
http://www.ppc4you.com/pages/13635.html
which allows me to pluf the 1/8" plug into my Trinity. I didn't use this exact one, but mine is similar to this one. Don't use the 1/8" converter that is in the form of a single solid piece, only use the ones that have a short length of wire between the two ends. The solid ones do not stay in properly. Also, by using the Y connector, I can both plug my Trinity into my stereo as well as plug in a regular 12v lighter power converter and power it. I then finished it off with the ProClip/Brodit cradle:
http://www.proclipusa.com/home/home.aspx?afid=42&admkt=670ca577
Everything works great! Once I have it all hooked in,
1.) I can play MP3's through my car stereo (useful)
2.) TomTom directions also go through my car stereo, and the music is slightly muted making directions easier to follow (very useful)
3.) Best of all, I tried calling my girlfriend (while the Trinity was in the cradle, playing MP3's through my stereo), and a.) her side of the conversation came through my car speakers, with the music muted, and b.) she said she could hear me just fine (but a little loud), which tells me the Trinity continued to use the internal microphone and amplified my voice the same way it would when set on speakerphone!
So, I now have the equivalent of in-dash navigation, integrated cellphone, and MP3 player. And I can take it with me when I leave the car! This is exactly why I bought this phone in the first place. What surprises me is that it actually worked!!! <grin>
Mike
Thanks for sharing your setup!
Good on ya!!
I share a similar story.
I drive a Mazda 3.
I installed a chip at the back of the stereo so that it allows an audio auxiliary input into my car stereo.
I then bought a 3-in-1 adaptor, car charger and mic adaptor from ebay.
This is so that I can place my craddle and phone further away, while having the mic externalised and stuck near my dashboard.
So in effect, same deal! GPS navigation + mp3 player while charging, calls get accepted no problem, and make calls via voice speed dial. Absolutely loving it.
Hey guys,
You should check out my set up, I have my Trinity on a GPS holder (suction cup), my trinity is then connected to a device like this:
http://www.oo.com.au/MP3_Player_Car_Modulator_FM_T_P5477C75.cfm
It accepts USB drives to play MP3's through the FM Transmitter, however I used the USB port to power my device, and the 3.5mm port (this allows you to plug in other devices and play through the device via FM) goes to my Bluetooth handsfree (i-Tech Radio Clip).
From here I have an ultimate wireless solution apart from the recharging, however Bluetooth really takes a lot of memory and slows the Trinity, however music plays and Tomtom works! no issues with that, the Radio Clip has remote functions so I can change music while Tomtom is still on, I don't have to minimise Tomtom and go to WMP to change music, I just do it on my Bluetooth device.
However this isn't a perfect solution, as Bluetooth really takes a lot of memory
I looked into using an FM transmitter approach, but there are a lot of FM stations around where I drive, so finding a clear channel gets to be a pain. Also, I'm stupidly picky when it comes to audio quality, which is better using a wired solution rather than the FM solution. Looks like a good apprach though!
hey guys
I bought a £50 car stereo from Lidl
which has a usb port
superb
x
In most cases with FM Transmittors and it depends on the FM Transmittor, it usually dominates the FM Channel, so if you had it on say 104.1 in which in Australia is 104.1 Today FM as long as the Transmittor is nearby and close to your aerial it is all good!
But yeah, I feel that bluetooth and FM Transmission can cause quality lose in Audio, however sometimes I can't tell the difference, I have the USB to 3.5mm converter and I was dumb enough not to find the USB and 3.5mm unit, which was available at that time, but oh well, alls well ends well.
http://cgi.ebay.com/ws/eBayISAPI.dl...item=160180673140&_trksid=p3984.cWON.m313.lVI
I bought this one and works great, it has everything I need, but when I connect it to my stereo, the music has no bass. Still have to figure that one out. Any ideas?
I have a small 2.5mm to 3.5mm adapter, then connect that to one of those tapes with 3.5mm jack. It works great on my PSP, but with my phone the bass is gone. I have 1.23 with GPS and WM5. I have to try different player (Using WMP) and the HTC equalizer & audio manager.
Anyway, I love the setup, everything is together into a cool device.
http://forum.xda-developers.com/showthread.php?t=333607
Hey! Exactly the same setup I had with my old Magician! I had glued the 2,5mm jack to the Brodit holder, so it would connect power and audio at the same time. It was a treat to use!
However, now I have a Sony BT2500 Bluetooth car radio and don't need no connectors (besides USB power) any more.
landshark said:
3.) Best of all, I tried calling my girlfriend (while the Trinity was in the cradle, playing MP3's through my stereo), and a.) her side of the conversation came through my car speakers, with the music muted, and b.) she said she could hear me just fine (but a little loud), which tells me the Trinity continued to use the internal microphone and amplified my voice the same way it would when set on speakerphone!
Mike
Click to expand...
Click to collapse
I have a similar configuration, on my alpine stereo.
Sound quality is great and everything works as you told.. very good but,
when i have a call, i can hear very well from my car speaker but the other side can't hear me my Trinity don't continue to use the internal microphone. I'm quite sure it's a trouble by audio jack to htc usb converter: every post i read i found only Y cables (audio and input power)... mine is 3 way: http://www.gpsforless.co.uk/product_details.php?id=7920
Or maybe a rom trouble? i'm using Bepe's 0.79 WM6...
does exist a cab file witch forces trinity to keep using internal microphone always??
i'm planning to buy a new radio with bluetooth audio streaming capabilities for my Trans Am.
probably this radio:
http://www.amazon.de/LG-MP3-CD-Tune...r_1_1?ie=UTF8&s=gateway&qid=1202059350&sr=8-1
Nice Price, Nice Functions, less Cable-Chaos....
Hi everybody
Is it possible to use the FM Radio without headset on hd2??
change the value in Registry HKLM/System/State/Hardware/Headset value 0 to 1 but i can´t find radioprogramms...
Do you have any idea???
the headset actually is needed because the wire also work as antenna.
So, no headset -> no wire -> no antena.
I don't know if you can change the behaviour with that registry key, but one thing that you can do is short the 3.5mm jack pinouts to simulate the headset.
Otherwise use the wonderful BRadio software.
You will be able to listen to all the radios you want without the headset... directly on the speaker.
Of course it' s streaming, so it means data.
spastik said:
I don't know if you can change the behaviour with that registry key, but one thing that you can do is short the 3.5mm jack pinouts to simulate the headset.
Click to expand...
Click to collapse
If you short the 3.5mm jack, wouldn't be all sound transferred to "headset"?
I tested the radio app yesterday and I found that the radio can be listen through the speaker, but you still need the headset as an antenna.
Just insert a 3.5mm into the HD2, even if it's only the jack.
You have only to make the hardware to recognize that a jack is inserted
Made this on Diamond. It will work even on HD2.
But remember that the headset cable is used even as antenna, then if you don't use any cable but only a jack you'll have a bad reception
Hi,
I bought a simple USB adapter to jack audio, see attached file, to use my Diamond as a mediaplayer.
I can hear a phone call across my car hifi but the built in mic is disabled.
I think that there is a setting in the registry to enable the built in mic, someone can help me?
Thank you
Luigi
If someone find a solution i'm also interesting!!!
I've tried some apps but no-one fonction to activate the mic with this cable.
It occurs because the jack adapter is not officially supported, and Diamond recognizes it as a stereo HF, disables built in mic and is trying to recept sound from HF mic (that is not present).
But yeah, it'd be nice to activate built in mic somehow ...
Where did you buy one of those! Like the name and make of it, but I can also tell you why its not working.
What you bought their is a simple adapter, not an amplifier. (Im sure amplifier is not the right word, but go with me) Basically, if you want it to work you need a device that changes the analog waves to digital waves of the usb, which by looking at that, doesn't do it.
If you're wondering were to get this magical device... well lenovo used to make one that came witha cheap headset.. but they stopped producing it a while ago.
You can buy one of these adapters:
HTC Diamond 3.5mm adapter, with mic
Hi there,
I've got a simple problem to solve: When in my car, I have my Raphael plugged to the car stereo with a cheap ExtUSB Adapter. The phone recognizes the adapter as a Headset, but I don't have a microphone attached.
When someone calls, I want to use the headset Audio but with the handset microphone.
Is there any easy solution for this? Putting the phone to speaker mode works sometimes, but the phones speaker isn't loud enough for most situations.
thx, h3po
push...
another situation, same problem:
I just bought a cradle for my Raphael which happens to have a built in microphone and a line-out jack, which I do not plan to use. But when I plugin my handset, it goes to headset mode and I cannot hear the ringtone when the phone rings.
I can't believe there's no way to choose the speaker output =/