Hi there,
I've got a simple problem to solve: When in my car, I have my Raphael plugged to the car stereo with a cheap ExtUSB Adapter. The phone recognizes the adapter as a Headset, but I don't have a microphone attached.
When someone calls, I want to use the headset Audio but with the handset microphone.
Is there any easy solution for this? Putting the phone to speaker mode works sometimes, but the phones speaker isn't loud enough for most situations.
thx, h3po
push...
another situation, same problem:
I just bought a cradle for my Raphael which happens to have a built in microphone and a line-out jack, which I do not plan to use. But when I plugin my handset, it goes to headset mode and I cannot hear the ringtone when the phone rings.
I can't believe there's no way to choose the speaker output =/
Related
Hi all.
If I have the FM Transmitter connected to the headphone jack on the phone and try to use a Bluetooth headset to make/recieve calls while driving, will this work?
I am concerned that the phone will try to output the sound to the car stereo and that the voice will be picked up by the phones built-in speaker.
Thanks for any help in advance.
If it's a standard headphone adapter, it should be fine, I was able to use my BT headset with a Himalaya connected to desktop speakers, but it might vary with devices.
Best bet is try if you already have a BT headset to connect a normal pair of headphones to it and see what happens, it certainly won't hurt it, and the fact it's speakers, headphones, or FM transmitter is irrelevant as it's just a jackplug audio output as far as the device is concerned.
I don't have the BT headset yet - Going to buy the two said items together, but hopefully it works on the XDA/K-Jam or whatever too.
Thanks for the help
Looking for anyone with some ideas.
On my Polaris (Touch Cruise) I connected my move to my car radio using the extUSB splitter for charging and audio, on my polaris I could answer my phone and have the audio come through my car radio using the AUX input but the microphone on my phone would always work. This was perfect for me.
With the Touch Pro, the microphone does not work with the extUSB inserted, sound still works perfectly as before but my only problem is that people cannot hear me. Is there a Reg setting to keep the mic on my phone connected and disable the mic output on the extUSB connector.
I know the Pro has Video Out on the extUSB but this should not affect the mic.
TB
anybody got any idea?
Hi, I'm new here and this first post is a really weird question.
Here's the story.
I am connecting my NS to my car audio deck using the 3.5" jack to the AUX in the car. The NS will detect that a headset is connected. I am able to listen to music or internet radio from my NS in the car.
Now I pair my BT handsfree earpiece to the NS for phone calls when driving. Pairing is fine.
Here's the situation.
When a call comes in I can answer the call by pressing the button on the BT earpiece, BUT once on the call it actually uses the headset for output and mic. There is no mic, so I can only hear the caller from the car speakers, but not be able to talk to them.
I will need to actually select output to bluetooth on the NS in order for it to switch over to the actual BT earpiece and have it work properly.
So the question, is there a setting that will always have the preference for bluetooth first?
If I only have the BT handsfree connected, it will connect to the BT unit without issues.
My car audio deck does not have BT and I wouldn't want to fiddle with the phone while I'm driving (it's against the law in some places and it's dangerous).
If I am receiving a call, the phone will sound the ring, but when I answer it the speaker go dead. When I try to play music, no sound is produced (although if I plug in headphones I find that it is playing). I think that problem is in headset jac cause while i was cleaning it, headphones were enabling and disabling automatically. Is it any software solution for my problem (app or script to turn off headphones auto plugging in)?
Sorry for my english
do u got any symbol in the notification bar if the headset or a pair of headphones are plugged? there are two different smybols for headset and for headphones.
if i got you right, there should be a prob with the female audio jack in the phone. it does not recognize what typ of headphones (headset or plain headphones) are plugged
I have an Xperia Z5 E6653 phone and it started to behave strange during calls in hands free mode.
1) If I switch on the speaker during a call the other party can't hear me but I can hear the other party on the speaker.
2) If I plug in the headset during a call then the phone doesn't recognize it, i.e. I can't hear anything in the headset and the headset mic doesn't work (but the phone main mic works).
In a normal mode (without speaker or headset) the microphone is working and I can also hear the other party. However hands free mode (speaker mode or headset plugged in) I have the above mentioned problem.
What could be the problem?
The solution is to reattach the headphone jack connector to the motherboard as it was released.