Hi all, I was just wondering what drivers need to be installed to get this to work on an XP system. I have HTC Sync installed, but setting the phone to ICM still doesn't trigger anything under Network Connections. Will I need to install ADB as well or should this work with the HTC Sync driver?
When you plug in your phone, there should be an icon that cones up in my computer from Verizon. It's a program that the internet connect mode runs through
Related
I've a software to control a locator GPS-GSM device and I need my HTC works like a modem. When I put my HTC into the USB must be recognized like a COM (start-control pannel- system-hardware-device administrator) to make a data call via this software. It musn't initiate the Active Sync software.
This software only works when a modem is connected. Before I connected my V3 Motorola Phone.
Any solutions?
Thanks
You can disable the ActiveSync on your PDA, just activate it, Menu -> connections, untick...
But for what reason would you wan't to use it as a modem? use it as a wired GPS device or connect to the Internet using it?
If the First, I'd recommend the Franson GPSGate, for the second use the ICS (internet sharing) App on your PDA...
I want my HTC Cruise was recognized like a modem when I connect it with the PC via USB.
Why?
Because I must download tracks from a GPS-GSM locator device installed into my car to recover my car if it were stolen, via software installed in the PC.
Before I connected my V3 Motorola Phone via USB to the PC, then it was recognized like a modem USB in COM4 for example. Then I set the communications setting from the software and I maked a data call from the software PC via V3 phone to the SIM installed into the car.
Now I need to connect my HTC instead of V3 and I expect it was recognized like a modem in certain COM.
Do you understand me?
Thanks
Yes this can be done.
1. Connect TC to PC like you would to sync. (you do need to make the active sync setting for allow wireless connection is checked)
2. go to progarms on the Pocket PC. There you find an app called Interent sharing.
3. Hit conect once you open the progarm.
4. Do what you need on the net.
I don't need sync the HTC with the PC and I donĀ“t need to connect to the net.
Let's imagine that we want to use the hyperterminal program in the PC, you must select a modem that it's installed in a certain COM with a desired speed, protocol, etc
Do you understand now?
Thank you.
I guess I'm seeing where this is headed...
Basicly you wan't the PDA to show up as a Dial-Up modem... I've done a bit of searching and with WM6, the dial-up modem function has been effectively replaced by the ICS, the main reason is, it was a b*tch to configure for internet access, and that is use of it in 99% of cases...
Unless the program you're using needs to actually see the modem I'd try to configure the ICS (add an extra connection) to connect to it... if it needs to see it as a modem, (and you want to keep the PDA), get a cheap phone that you can occasionally use as a modem for this task
Using the ICS will disable the activesync for that connection, but if you wan't to disable the activesync just follow the steps mentioned before...
I reckon bluetooth is the only way to go for this, need to dig out my BT dongle to check but I think it should allow you to use the phones dial-up service.
Maybe this?
Maybe you need this?
http://www.mobile-stream.com/usbmodem_wm.html
Hey everybody!
I searched all over the Internet for an answer, even sent an email to htc, but my problem wasn't solved.
I have this connection problem with my HTC TYTN 2. When I connect it to my PC, my PPC starts charging, but on my desktop I get no notification at all that a device has been connected. I installed Active Sync, HTC Sync, and still didn't find anything. What could this possibly be? I managed to connect my PPC through wireless and using WIFI Remote (a PPC app). But I need an USB connection so that I can fully use it. Please help me, I've tried everything (I think)
Hi..
I recently bought samsung galaxy s2 and have a few doubts regarding a few features..
The situation is something like this-
My phone is connected to the internet via wifi..
Phone is connected to laptop via usb cable..
And i want to access the internet on my laptop is it possible??
The issue here is -
My laptop (lenovo R60, 2006 make, Win XP) network card seems to be incompatible with the high speed modems.
As when i hover over the network icon in the tool tray it shows 54Mbps and the wifi in the phone is shown as 65 Mbps..
So i suppose this is the problem with the NIC card for the laptop.. Am i right in assuming this?
Please help me resolve this issue..
Sure, use usb tether app. it does 3g, not sure about wifi, but worth a try: https://play.google.com/store/apps/..._apps#?t=W251bGwsMSwxLDEwOSwiY29tLnBkYW5ldCJd
try it with kies
it should let you do that
I just make sure only WIFI data is enabled from the drop menu, and then settings-wireless-tethering then check the USB tethering option
I have tried USB tethering its giving problem with the config file given there for Win XP..
While installing the new hardware using the new hardware wizard it is unable to find the config file downloaded onto the desktop itself..
Tried downloading the PC studio 3.2.2 for samsung and using the network wizard there.. But that too wasnt connecting .. Gives me an option of only removing some connections , which are not there in the first place..
Is there any other alternative for that config file available?
And will switching off mobile data enable usage over wifi on its own? I need it to be wifi only as i do not have any data plans for 3g enabled on my phone..
Thanks a lot.. That USB tether app works.. :good:
And it connects via wifi of phone as well..:victory:
Found that my rooted gs2 phone works fine for usb tether with the juggernaut ROM installed. unfortunately I couldn't tether with the phone connected to the WiFi. I will have to remember that app on the market if the need arises.
Syrusoo said:
Found that my rooted gs2 phone works fine for usb tether with the juggernaut ROM installed. unfortunately I couldn't tether with the phone connected to the WiFi. I will have to remember that app on the market if the need arises.
Click to expand...
Click to collapse
I first tried slickmod 3.6, tried a bunch of other roms afterwrads, but none of them as easy to use and i love the look of it.
You could try this if you don't want an app filled with permissions / ram usage that can be fixed rather easily
[just a question do you have any of the 3 Kies processes running: kies, tray agent, KiesPDLR.exe in task manager while trying to use your phone as a wifi usb?]
Im running slickmod3.6 and all i need to do is enable wifi only from the awsome looking drop menu and then settings tick usb tether and i get my wifi data speed/limit Im pretty sure I tried that with stock Telstra firmware and did not work. Why would i want a permission hungy app for if it's not needed, it has a very modded look to it its great, plus i added some xtras.
Just a thought try uninstall the drivers, download kies (Set all 3 kies processes to not start at boot, msconfig should do it). Only use it when you need to. let it update the drivers (note the new version n.o drivers for future ref) If that dont work uninstall the driver again, and then click scan for hardware changes, let windows update find it.
Failing that, I have quite a few driver packages I have collected with the odin setup zip that I can host on my skydrive just pm me.
Also when uninstalling drivers, and you run into problems delete the ghosted drivers as well, by default you wont see them.
according to the guidance, i have fully installed Sync Manager, and MTP device and USB device have already fully installed.
when connected to PC, my phone has also turned on the USB debugging and change the USB network setting to Internet pass through.
and i'm pretty sure my windows media player is v.12.
however, Sync Manager just doesn't connect to my phone.
when the phone is plugged into PC, Sync Manager doesn't pop out automatically, either.
can somebody help me with it?
it bothers me quite a lot.
Hi! My name is Recoder. I recently brought a new Google Nexus 5 (16GB Black) and have a Tata Docomo 3G Connection (India).
I would actually like to Reverse Tether my Phone (so as to get my PC Highspeed internet on my phone, since the mobile network is a bit choppy at times, and the connection times out very frequently). But in order to reverse tether (without Root), I need to get my Phone recognized as a Tethered Mobile on my PC.
I am actually a beginner in Tethering.
1. I connected the Phone to PC via USB, and clicked on USB Tethering. (it says tethered), but my PC keeps on installed Remote NDIS Driver forever and finally says Driver not installed nor does it recognizes my Phone. (It Gets Recognized as a PTP, MTP Device)
2. I have USB Debugging Enabled (don't know whats that for). Disabling it does not make any difference.
3. I tried the Google USB Driver but it does not have the driver for Nexus 5, and with usb debug enabled, it comes as a Samsung Android ADB Composite Device.
So Please help my how to Tether my Phone (Step by step if possible, since its my first time)
I don't want to root my new Nexus.
With Warm Regards,
Super Recoder