Database Info

Unable to get tethering or internet sharing working on VZW TP2

It's easier if I just post a link to the thread over at smartappsworld so I'm not stuck re-writing it all. http://smartappsworld.com/thread-t...-getting-error-692-hardware-failure-in-modem
I still have not been able to resolve these issues. Tethering worked without problems on my Q9M, but on the TP2 it gives me error 692 -There was a hardware failure in the modem - . Internet sharing isnt cooperating either. New hardware wizard in XP pops up for Generic RNDIS device. When I tried to feed it some drivers for Internet Sharing (pulled by another xda member in another thread here somewhere), XP gives me some bogus error about a missing entry in one of the .inf files that I pointed it towards. It doesnt specify which file, then it closes and there is a big yellow ( ! ) over Internet Sharing device in network devices (Driver not installed).
Thats a quick run through of the issues I'm dealing with. I really need this working as this is my only way to connect my PC to the internet. I live in boonie land where cable is nowhere in my neighborhood and dsl is too far to connect.
Yes I searched. I spent a great deal of time going through xda forums and Google... before I decided to post here. Thanks for anyones help in advance.
T.C.

I have not had a problem tethering my tp2 with verizon using Win XP Pro x64, or XP home x86.
The way that works for me is:
Run the internet sharing program, Not the VZW access manager crap.
Tell it to connect
After it connects, then plug in usb from pc to phone
The pc recognizes it as another network connection
It gets its IPs and all no problems.
Open up your choice of browser and off you go.
I have never had to install drivers to do any of this, and also it doesnt use active sync when doing it this way.
hope this helps.

I pulled the internet sharing program out of the Windows folder (made a shortcut ). The problem is when I connect to the PC. The install new hardware wizard comes up for Generic RNDIS device. This is after I clicked "Connect" in IS. I have clicked cancel , then it says install failed, your new hardware may not work properly. IS disconnects and Activesync starts syncing. I tried it the first way , letting AS sync once then turning IS on, same problem.
I dont use VZ Access Manager. I was forced to uninstall that and Activesync when suddenly the PC wouldnt recognize anything while the phone was plugged in. After that, the phones internet wouldn't work either so I then had to restore the phone to factory defaults via a hard reset. After resetting, I found that 228 wouldn't program the phone. The next day I nearly took it in to VZW. tried 228 again and it worked finally. Got my phone internet back and I'm back to trying to get IS working. I didn't install VZAM, but I do have the USB driver installed.
Are there certain files that are needed on XP for this? I am still running 32bit XP Pro if that makes any difference. Service packs maybe? I'm up to the point where I'm about to go out and buy a WiFi card and try connecting it that way. Something Has to work here.

The generic RNDIS ( Remote Network Driver Interface Specification ) drivers are part of the ActiveSync install and are needed for TCP/IP between the PC and the phone.
Install ActiveSync.
Plug in the phone.
Don't cancel the New Hardware Found - let it install the drivers.
Set up a sync relationship with the PC if you like - not needed.
When you tell ICS to connect, it should drop any other connection to the PC (Hard Drive, Active Sync) and make the Windows connect sound. Then you should see the network negotiation icon in the System Tray as it sets up the internet sharing.

When I dont cancel New Hardware wizard, it doesn't find any drivers to install. This is if I let it search for drivers automatically, and after Activesync is installed. See what the problem is here? What should normally work, doesn't. Are there key files missing in the copy of Activesync that is included on the CD from VZW? What am I missing here? When I turn Internet sharing on, on the phone, it always says something like ''Check USB cable connection'' and it never changes. The hardware wizard never finds the drivers, and when I try to point it towards driver files, it says theres an entry missing and wont install.
Grr..if you read through the other thread link above, you know how long i have been trying to get it to work. Frustrating!!

Wallking HotSpots
THE-COPS said:
It's easier if I just post a link to the thread over at smartappsworld so I'm not stuck re-writing it all. http://smartappsworld.com/thread-t...-getting-error-692-hardware-failure-in-modem
I still have not been able to resolve these issues. Tethering worked without problems on my Q9M, but on the TP2 it gives me error 692 -There was a hardware failure in the modem - . Internet sharing isnt cooperating either. New hardware wizard in XP pops up for Generic RNDIS device. When I tried to feed it some drivers for Internet Sharing (pulled by another xda member in another thread here somewhere), XP gives me some bogus error about a missing entry in one of the .inf files that I pointed it towards. It doesnt specify which file, then it closes and there is a big yellow ( ! ) over Internet Sharing device in network devices (Driver not installed).
Thats a quick run through of the issues I'm dealing with. I really need this working as this is my only way to connect my PC to the internet. I live in boonie land where cable is nowhere in my neighborhood and dsl is too far to connect.
Yes I searched. I spent a great deal of time going through xda forums and Google... before I decided to post here. Thanks for anyones help in advance.
T.C.
Click to expand...
Click to collapse
I myself use WalkingHotSpots http://www.walkinghotspot.com/. It is 24.99 for a lifetime license and currently they allow you to use the license over and over when you upgrade your phone. I used it first when I had the Touch Pro and now I am using it with my TP2. It is a program that allows me to add up to 5 connections and use my TP2 as a Hotspot. Now of course it would requre you to have your TP2 connected and charging via wall outlet. But basically it will allow me to connect 3G using my WiFi. I just used it Tuesday night while at church to connect back to my business server and resolve some databases issues. My laptop was running at an excellent speed and I was online over 2 hours with no drop connections. The walking hotspot website says that it will not work with Verizon but I can personally say that it does. I do not have the Internet connection software installed on my TP2 so I am going all WiFi for my connection. I added a password and name for my Walking HotSpot so no random joe could just drive by and conect lol and I was up and running in about 10 minutes. They don't offer a free tiral but you can try it for 1 month for 6.99 and if it doesn't work you will not have wasted 25.00. Just choose to use it for a Touch Pro and you should be able to get the download. I have had it over a year now and it has come in very handy especially when I go home to visit Mom as she has no internet and walking hot spots runs my husband's laptop and mine without any issues. So whatever you ultimately do I hope you get it worked out

WMWifiRouter
I use WMWifiRouter on my phone for internet sharing. It works great. This may be an alternative for you.
http://www.wmwifirouter.com/
(the site appears to be down at the moment)

I just loaded a program called PdaNet and was really amazed at how easy it was to install. Hooked up on Verizon @ 2.4mbps - actually faster than my DSL!!!
I've only tried it a couple times but I recommend going to here http://www.junefabrics.com/pdanet/index.php and download a trial version.

WMWiFiRouter
I second the vote for WMWiFiRouter. I used it on my Mogul and now on my TP2 (both with Sprint) -- no issues whatsoever -- more importantly, no tethering fees.

For me now, when i use USB or Bluetooth over ICS, my browser has to go to 3g.vzwdun.com. It didn't use to do that before. How can I keep the device from reporting that I'm tethering...

Captivate Update Removes USB Tethering

When I got my Captivate and first plugged it in to my laptop, I was surprised when I was greeted with four options on the screen, Kies, Music Device, Media Device, and USB Tethering. Of course, I tried out USB tethering and it worked nicely.
It looks like the latest OTA update just removed that functionality. The option isn't presented when I connect to my laptop. I wonder if they removed it all together or just hide the option.
Of course, there are several other tethering options available, so it's not a great loss, but I thought people might like to know about it. I'm just glad the update didn't brick my phone! Now if I could only fix the problem with the phone turning itself off randomly when it sleeps. This update doesn't seemed to have helped with that problem at all.

Captivate PC Internet (Tethering) Option Gone?
Wow, thanks for the heads up, I kind of figure that may happen they give a little and take a lot. Did you have the dreaded GPS issue and if you did was it fixed? Have you checked to see if the PC Internet option was removed from Settings>Applications>USB Settings?
Thanks Roger

Yes, the OTA took off the usb tethering option in USB settings. GPS does not seem to have been fixed on my end at all. Been about a minute, and navigation is still trying to get a lock.

Autarkhis said:
Yes, the OTA took off the usb tethering option in USB settings. GPS does not seem to have been fixed on my end at all. Been about a minute, and navigation is still trying to get a lock.
Click to expand...
Click to collapse
Thanks, I'll hold out for the Froyo update.
Roger

Why not use pre8?
From a phone on an app

What is pre8?
I just did the update and now I'm screwed. I'm at work with a bunch of homework to do and can't tether. How can I fix this before tomorrow night? I don't want to root my phone and can't use pdanet because my laptop doesn't have Bluetooth.

why not flash cognition ? That has mobileap in it...
Sent from my SAMSUNG-SGH-I897 using XDA App

Since I don't want to root my phone are my only options to either add Bluetooth to my laptop and pay for pdanet or add tethering to my plan?

jamespaulritter said:
Since I don't want to root my phone are my only options to either add Bluetooth to my laptop and pay for pdanet or add tethering to my plan?
Click to expand...
Click to collapse
Have you looked into the 1-click factory restore option?
i dont think that it requires root to work.

I just broke down and bought easy teather works great.
Sent from my SAMSUNG-SGH-I897 using XDA App

still having a little bit hassle on having a lock or fix location. always needs the help of network. GPS alone is kinda........urrrrggghhh!

If you are ok with a USB cable, I found a way to still use tethering over the USB cable after the OTA update. It is just not a straight forward as it was before. Here is how I got it to work on stock ROM, no root access.
Plug in USB cable and connect to PC. Select Mass Storage mode (when you have activated the Ask on connection in the USB Settings - Application menu under Settings). Fully connect you phone to the PC, by pulling down the Status bar and selecting the USB connect line and making the internal (and optional if you have installed external) Memory card visible on your PC. The on the PC disconnect the USB drives again (you have to disconnect first on the PC) and then end the USB Mass Storage mode by pulling again down the Status Bar on the phone and turn off the USB connection. Then when you unplug the USB cable and replug it and now select the Kies connection type, it will successfully connect to Samsung Kies. If you now have Samsung Kies on your PC installed (the UK version)you can select there the Tethering and start it and you can connect and your phone will do Tethering.
I tried it several times and every time it worked. This is not as elegant as it was before, but at least if you need an internet connection and your phone is the only way to get to it, you can still tether.
Hope this will help someone out there who needs a PC connection!

thgoepel said:
If you are ok with a USB cable, I found a way to still use tethering over the USB cable after the OTA update. It is just not a straight forward as it was before. Here is how I got it to work on stock ROM, no root access.
Plug in USB cable and connect to PC. Select Mass Storage mode (when you have activated the Ask on connection in the USB Settings - Application menu under Settings). Fully connect you phone to the PC, by pulling down the Status bar and selecting the USB connect line and making the internal (and optional if you have installed external) Memory card visible on your PC. The on the PC disconnect the USB drives again (you have to disconnect first on the PC) and then end the USB Mass Storage mode by pulling again down the Status Bar on the phone and turn off the USB connection. Then when you unplug the USB cable and replug it and now select the Kies connection type, it will successfully connect to Samsung Kies. If you now have Samsung Kies on your PC installed (the UK version)you can select there the Tethering and start it and you can connect and your phone will do Tethering.
I tried it several times and every time it worked. This is not as elegant as it was before, but at least if you need an internet connection and your phone is the only way to get to it, you can still tether.
Hope this will help someone out there who needs a PC connection!
Click to expand...
Click to collapse
For anybody who is wondering this worked fine for me as well. I selected UK for my location and language. I'll post back up letting you know whether or not it works selecting USA. Once configured and installed, it takes roughly 60 seconds to be up...

thats excellent. i do have Kies installed. I'll give it a shot tonight.

Wifi lost while charging from computer
Can any confirm since the update, wifi connections are now lost while charging from computer via the usb port. Edge or 3g is available if you turn off wifi before connecting. With wifi on, disconnect the usb from the computer and wifi access is again available on the phone.

Running Easytether now. Doesn't require root and seems to work fine. Available on the market, if you pull your sim card. $10 for the full licensed version.

Samsung Kies is free software specifically for the galaxy s series and allows you to tether.
The link is below. being a new member they wont let me post an actual link.
**in.samsungmobile.com/support/softwaremanuals/software.do?phone_model=GT-I9000&sw_type=SW**

Is there a way to re-enable the tethering option through the source code or rooting? Also if Froyo is OTA from AT&T, I would assume they would continue to keep this option hidden/removed. Am I right?

Zman28SS said:
Is there a way to re-enable the tethering option through the source code or rooting? Also if Froyo is OTA from AT&T, I would assume they would continue to keep this option hidden/removed. Am I right?
Click to expand...
Click to collapse
Yea, check the android development section. The Cognition ROM re-enables both USB and Wireless tether...

Tethering was not removed by the update. You don't need Kies installed, you don't need root, and you don't need any tricks. If you select the "Kies (firmware update)" mode, tethering works fine, assuming you've installed the USB drivers and created the necessary dial-up networking connection for the USB mode.

Use phone as wireless adapter?(NOT WIRELESS TETHERING)

I want to know if there is a way to use an android device as a wireless adapter? Not wireless tethering of your data connection but the ability to use the wifi connection on your pc.
Sent from my DROID3 using Tapatalk

Turn your data off and turn on your WiFi, connect to the desired network and try to tether via usb to your phone. This should hopefully bridge your connection if you have an aosp ROM. I'm not sure about sense, as I've never tried it on a sense ROM before.
Sent from my PG86100 using XDA App

So you mean download the wirless tether app and use it while data is off? And you can do it via usb?/ I've never used data tethering so idk im a noob
Sent from my DROID3 using Tapatalk

He meant to say, connect to wifi and in settings there will be an option to tether via usb
Although i am also not sure about sense roms
Or you can use a market app
There are many, Easy Tether will do the job
Connect to the wifi network and then use usb tethering

okay well I have a droid 3 so there aren't any roms out for it and when I try a wifi tether app from the market it disables your wifi
Sent from my DROID3 using Tapatalk

Moved to proper section

yus4eel said:
okay well I have a droid 3 so there aren't any roms out for it and when I try a wifi tether app from the market it disables your wifi
Sent from my DROID3 using Tapatalk
Click to expand...
Click to collapse
Okay, so basically what you're going to be doing is using your phone as a USB WiFi dongle. To do this, follow these instructions VERY carefully.
1) Assuming that you are already rooted (via z4root, Gingerbreak, or some other means), search for "EasyTether Lite" on the Android Market and download it.
2) Go into Settings>Wireless & Networks
3) Uncheck the box that says "Mobile Network", "3G", "Mobile Data" or something along those lines.
4) Check the box that says "WiFi" and connect to the desired network.
5) Now, download and install the drivers you need for EasyTether to work with your computer here (note that you are going to do this from your computer and not your phone): http://www.mobile-stream.com/easytether/drivers.html
6) Connect your phone to your computer via USB cable and open the EasyTether app. Enable tethering and with a little bit of magic and fairy dust, you should now have a connection on your computer.
Good luck mate.

Need for same
Need an expert here!
what we look for is using android phone to connect other devices not only to internet but also to each other .
We could do it with our modem,but with tethering is like a hotspot , every device can connect internet but cannot see other devices.
Everywhere i looked was explainin "how to tether" which is built in android 2.2 already.
Helps will be highly appreciated

Is it too simple?
I had trouble getting USB tethering on my macbook, not my PC, but:
I searched the market for USB tethering.
and with "Easy Tether lite" (the first app in the search results; there are other options, I tried this one first and it worked great).
I installed on my phone, ran it, followed the wizard, had to install USB tethering drivers for OS X at some point.
Now:
Phone getting WiFi from my router and entering my computer via usb.
I even set it up now to send this very post!!
cheers,
-nerB
EDIT: (Hmm, your syntax is kind of shaky, original poster... You don't mean use the computer as a wireless adapter for your phone do you?? that would be internet pass-through, yes? I think you do mean USB tethering but using a WiFi source, not the mobile connection. Is this as simple as hooking up a usb data tether but using the WiFi instead of 3G from your phone, such as to use a dingy laptop without wireless to get the WiFi in a Starbucks/etc/etc? Hmm.
Otherwise, your phone is not a WiFi wireless adapter, it has one that your phone OS connects to, which then "usb tethers" to computer...
I've never even seen a usb cable that connects a mobile phone to a mobile phone. Haha. I suppose if you had one, you should be able to USB tether from one phone and Internet Pass-Through on the other.....:/ )

Check out this thing called Bluetooth for that. It works wonders.
Sent from my ICS loving Evo 3D.

solution without additional software while having cyanogenmod
This works with cyanogenmod10 out of the box. Probably also possible with cm7/cm9 too.
Connect phone via cable to pc, connect phone to wifi, enable "USB-Tethering" (Settings -> Tethering/Hotspot), let OS detect the new device, done.
I know this thread has no activity since over a year, but if anybody finds this page like me while searching for this topic, I could be helpful for him knowing a method without using additional software while having cyanogenmod.

Chiefbrain said:
This works with cyanogenmod10 out of the box. Probably also possible with cm7/cm9 too.
Connect phone via cable to pc, connect phone to wifi, enable "USB-Tethering" (Settings -> Tethering/Hotspot), let OS detect the new device, done.
I know this thread has no activity since over a year, but if anybody finds this page like me while searching for this topic, I could be helpful for him knowing a method without using additional software while having cyanogenmod.
Click to expand...
Click to collapse
yet another reason to consider CM flash

Just some questions...
OK GUYS. thnx for the usefull info.
Now i wanna say that suppose we have this wifi dongle for connecting to computer..(see photo attached) we use this for connecting WIFI to our PC's. RIGHT???
NOW i wanna ask if it is possible that we can use our phone instead of this ""DONGLE"" as wifi signal catcher. NEITHER USB NOR WIFI TETHERING(like easy tether lite or many other options available on XDA.) [people are actually asking for "THIS OPTION" so we don't have to spend another 20-30 bucks but they ends up with USB or WIFI tether)
we connect our phone to PC and Search for WIFI Signals on PC... NOT on the phone itself.
please guys, if any one know how to do this then please share. OR please tell if it is possible or not..
thnx...

bump

pump
me too.
I want pc look the android devices (via usb) such as "usb wifi" and control the wifi (of android)

Chiefbrain said:
This works with cyanogenmod10 out of the box. Probably also possible with cm7/cm9 too.
Connect phone via cable to pc, connect phone to wifi, enable "USB-Tethering" (Settings -> Tethering/Hotspot), let OS detect the new device, done.
I know this thread has no activity since over a year, but if anybody finds this page like me while searching for this topic, I could be helpful for him knowing a method without using additional software while having cyanogenmod.
Click to expand...
Click to collapse
Well sir thanks it surely did help some one out and in this case its me so thanks again ....

using linux
im wondering is there anyway to use my phone as my wifi adpater so that ill install kali linux on my pc and receive wireless ssid

Use phone as wireless adapter for pc
just connect to wifi network in android and connect that android to pc with data cable and enable usb tether in android phone

MikeCriggs said:
Okay, so basically what you're going to be doing is using your phone as a USB WiFi dongle. To do this, follow these instructions VERY carefully.
1) Assuming that you are already rooted (via z4root, Gingerbreak, or some other means), search for "EasyTether Lite" on the Android Market and download it.
2) Go into Settings>Wireless & Networks
3) Uncheck the box that says "Mobile Network", "3G", "Mobile Data" or something along those lines.
4) Check the box that says "WiFi" and connect to the desired network.
5) Now, download and install the drivers you need for EasyTether to work with your computer here (note that you are going to do this from your computer and not your phone): http://www.mobile-stream.com/easytether/drivers.html
6) Connect your phone to your computer via USB cable and open the EasyTether app. Enable tethering and with a little bit of magic and fairy dust, you should now have a connection on your computer.
Good luck mate.
Click to expand...
Click to collapse
sorry for bringin up a old thread
but man ure a life saver my dongle died on one of my pcs and i used the same method for my LG G4 works like a charm
thank you a million times man

I actually just tried the above program and it works. It has serious limitations if your not getting the paid version. Blocks a bunch of webs sites and all secure ones. It does work though. I really wish Verizon would not have found it necessary to remove wifi sharing over USB for some dam reason. The S7 I have, had it factory and they removed it. Not sure why? Seeing how it does not have a fuking thing to do with the mobile network. I can actual tether my computer by USB using mobile network and can't from my wifi. Can already bypass they're tethering fee.
I will continue reading and searching till I find a way to undo or work around big reds unnecessary removal of this feature. Even if it involves crawling a 1000 miles on my hands and knees, on broken glass to find some big wig and beating the reversal out of him with the very S7 I'm typing this on.

[Q] How to get Kies over Wifi to sync with laptop?

I have the Samsung Kies application installed on my Win7 x64 laptop. Using USB works fine, but Ive been trying to get the WiFi sync option working and I can never get the Laptop running Kies to see any of my 3 Samsung Galaxy S2s (two skyrockets and one T989).
I followed the guide to make sure I setup network discovery, enabled the right services, etc.
However what do I have to do on the phone to make it "activate" or anything to show up on the laptop? What am I missing?
Again this is Kies over Wifi, Im not talking about using Kies Air application on the phone and going to the URL the phone shows, that works just fine.
I saw a few guides searching on Google, but problem is they all seem to show this option of "Kies via Wifi" under the Network/Wireless menu, I have nothing like thatin all 3 of my phones which are 2.3.6, or 4.0.3 or even the 4.0.4.
Dixit

You dont need to run a program on your PC. Turn on your wifi on your phone and run kies air. When it starts it will give you the IP address of your phone. Open up your browser on your computer and type "IPADDRESS:8080"
8080 stands for the port number. or it may be 80 but im sure its 8080.
Theres a program on the market that does the exact same thing. WiFi explorer im thinking is the name.

Ends said:
You dont need to run a program on your PC. Turn on your wifi on your phone and run kies air. When it starts it will give you the IP address of your phone. Open up your browser on your computer and type "IPADDRESS:8080"
8080 stands for the port number. or it may be 80 but im sure its 8080.
Theres a program on the market that does the exact same thing. WiFi explorer im thinking is the name.
Click to expand...
Click to collapse
Yea Im familiar with that, my 2nd to last paragraph mentioned that I have no problem with Kies Air.
But I was just trying to figure out how to get Kies to sync via Wifi as it claims it can directly with the phone. But i can never get it to work. Thats what Im talking about. Kies Air is different and like I said works fine, but Im talking about the Desktop thick client application that is called Kies and supposedly connects via wifi to the phone and allows it to sync wirelessly like the iPhones can now do.
Dixit

Forgot to mention that your computer and your phone MUST be connected to the same network. You can even activate wifi tether on your phone and connect that way.

I have the same problem. Want to use wi-fi connection to sync my Samsung Galaxy Y Duos via Kies via Wi-Fi automatically. The problem is that I can't connect my phone to Kies via Wi-Fi. Via USB it works fine, but I want it via Wi-Fi.
It looks like my Win 7 haven't accepted the driver for the phone form Kies at a time of Kies installation.
Have any one solved this issue?

[SOLVED] internet sharing, wifi, usb, linux and other problems

Hi all,
I love my phone, and the roms all these prouds guys are releasing out there. I'm currently on CM9 by Dhiru (alpha12).
My problem is that i really need the thetering feature that Android OS provide; is necessary for me, but i faced a lot of problems with my i9003!
when i was in GB Stock, i was able to share internet via Wifi and Bluetooth to my linux box (yeah, i'm on linux) without any issue, but for the usb theter (the best way to do it for battery and security related stuff) i hadn't any luck. I passed to CM9 for all the features it provides, for the good loking and couse is really better that GB in all parts!
But now, i not only be unable to theter via usb if also with bluetooth and wifi!!! wah
So now i would like to know if someone can point me in the right direction to find a way to use theter on my phone!!
Ah, no WEP tether here plz
P.S.
with a galaxy y i can succesfully usb tether on my box...
P.P.S
srr for my awful english

Use a 3rd party app for internet tethering!

Tethering in Cm9 alpha12 don't work. Its a known bug. You can use apps from play store.
Sent from my GT-i9003

amifiq said:
Tethering in Cm9 alpha12 don't work. Its a known bug. You can use apps from play store.
Sent from my GT-i9003
Click to expand...
Click to collapse
wifi tethering with third party apps works only because set the wifi in ad-hoc mode instead master mode, and i won't to set my shared connection in this way, also because of WEP enc.
The usb tethering apps works only (i suppose couse never tried) for private driver installation; that means no universal way, that mean i need to install these apps and proprietary drivers on the machine i want to use, and again is not feasable!
so, these 2 options are not a solution.
And i have to say that the usb tethering seems to be broken in linux on i9003, couse i can succesfully usb tether (wifi ofcourse work) from a galaxy next!

Try this app. The phone was recognized without doing anything when I used it (linux, I had to install Samsung drivers on Windows)

wow
loSconosciuto said:
Try app. The phone was recognized without doing anything when I used it (linux, I had to install Samsung drivers on Windows)
Click to expand...
Click to collapse
You're Brilliant!!! this app worked almost flawlessy!!
On my archlinux box i had only to enable usb0 via ifconfig and ask dhcpcd for the ip!!!
Really, u solved a tons f problems! very thanks! i wanna dig about this app and why the embedded way is not working properly
OT
howto edit title for [SOLVED] mark?

j0llyb0x said:
You're Brilliant!!! this app worked almost flawlessy!!
On my archlinux box i had only to enable usb0 via ifconfig and ask dhcpcd for the ip!!!
Really, u solved a tons f problems! very thanks! i wanna dig about this app and why the embedded way is not working properly
OT
howto edit title for [SOLVED] mark?
Click to expand...
Click to collapse
It worked for me.
I tried native thetering on my laptop using a network-manager (useful when you have to manage several wifi networks..) and everything worked without really doing anything, no ifconfig, dhcpd etc, I just plugged the phone. Maybe if you do things manually there's something extra to do, I've never tried it because in my case "no network-manager => cable avaible => no need of thetering", but I might try one day.
Anyway the app I suggested is working great, it's as fast as native thetering, at least it was fast when I used it, it has a very nice interface and it bypass all the thetering restrictions your provider might set ;D
The only problem I have with it is that whenever I use it, I need to toggle "USB debug" to make this one work again without a reboot, but that's a minor thing. And another thing I noticed is that (in CyanogenMod) even though the data usage is correctly calculated, there's no "android-usb-theter" in the list and the traffic is equally spread. But as long as it keep tracks of it it's ok.
To edit the title: edit the first post > "Go advanced" and there you should see the option.

Mmh dunno,
but i'm on Chanogen 9 with i9003, and on a ubuntu box and network-manager running i hadn't any luck with the native theter, intead, with a galaxy mini it worked with both system out of the box... maybe is my phone

loSconosciuto said:
Try this app. The phone was recognized without doing anything when I used it (linux, I had to install Samsung drivers on Windows)
Click to expand...
Click to collapse
Tried this app.. Tethering works fine, but my external sd card, that is my micro sd does not show up on my comp (running Windows) in usb mass storage anymore.
When I installed this app and connected it to the it installed a mass storage driver, maybe that is responsible. How do u fix it??

ivAnash said:
Tried this app.. Tethering works fine, but my external sd card, that is my micro sd does not show up on my comp (running Windows) in usb mass storage anymore.
When I installed this app and connected it to the it installed a mass storage driver, maybe that is responsible. How do u fix it??
Click to expand...
Click to collapse
Mmh, why did you use it if usb tethering is working fine under windows?
yes, probably is that driver that force to use it; did you used to have mass storage working before using that app?
and the drivers, was provided by the software itself, asked by windows or what? where did you got it?
can you just uninstall it and try if work again?

I installed the tethering app.. when I connect the phone to the comp after that, the driver gets installed on its own ..and the external SD does not show up any more .. Both storage work fine in mass storage mode prior to the above driver installation ..