Related
Hello XDA fourm people! First of all, I want to say thank you to all the devs out there working hard to get us nice things on our phones
I am a noobie at flashing custom roms so I need a bit of help. I have a cricket Huawei Ascend running 2.1 update 1. I recently read about the CM7 rom that has been succesfully ported over to the ascend but I have no idea where to even start. My phone IS rooted using z4root, but i really want to install CM7.
I know you have to do a nandroid back up and then used clockwork mod? I have somewhat of an idea of what these things do, but I dont know how to use them or where to get them. Any help would be appreciated.
Lol and I know that some of you are looking at this rolling your eyes, but I'm just new and trying to get the hang of it.
prepaidandroid.org/index.php?title=CM7-Ascend
They make it where almost anyone can do this so if you have further questions feel free to ask as I have been bricking my phone and reflashing it back to normal since I bought it lol...also you might look into getting multiple custom ROMS at that same site as one is not really better than the other so you'll want to check out all of em at some point
Myself I have flashed Icarus 1.1 and CM7-Ascend-04052011 (also flashed the nightly release of this but just for a recovery reason which failed) I would suggest Icarus 1.1 if you want an extremely stable ROM that runs off the current system you have on your phone. CM7 is still a little unstable but I run it as an everyday driver because it uses 2.3.3 gingerbread and it also allows for system overclocking to 710mhz without the use of third party apps. Like I said though, test drive them all and have fun with it. Just make sure you make a factory back up and a back up directly after each launch of flashing just in case something does go wrong you can also go back to the bulky OS your running now ;-)
tony442 said:
prepaidandroid.org/index.php?title=CM7-Ascend
They make it where almost anyone can do this so if you have further questions feel free to ask as I have been bricking my phone and reflashing it back to normal since I bought it lol...also you might look into getting multiple custom ROMS at that same site as one is not really better than the other so you'll want to check out all of em at some point
Myself I have flashed Icarus 1.1 and CM7-Ascend-04052011 (also flashed the nightly release of this but just for a recovery reason which failed) I would suggest Icarus 1.1 if you want an extremely stable ROM that runs off the current system you have on your phone. CM7 is still a little unstable but I run it as an everyday driver because it uses 2.3.3 gingerbread and it also allows for system overclocking to 710mhz without the use of third party apps. Like I said though, test drive them all and have fun with it. Just make sure you make a factory back up and a back up directly after each launch of flashing just in case something does go wrong you can also go back to the bulky OS your running now ;-)
Click to expand...
Click to collapse
Thank you! I followed a thread that showed me how to flash CM7. It is buggy and unstable, but I love it! I've wanted to flash Icarus too, but i think Im going to play around with CM7 for a bit and see how it works out.
hey guys. Long story short, i had my first captivate for almost more than a year, rooted it and had all the fun with it. Then, the screen cracked, i used my insurance and got a new captivate. But, after 3 months of being super busy... I figured id rather just send the new (unrooted, uncracked) captivate back, get my refund, and go back to using my old captivate, that is already rooted has all my contacts and so on. Now....as i said its been quite a while, so i am definitely rusty. First question is that i remember that since i was rooted i was able to download apk files and install them onto my phone when it waas plugged into my pc. I definitely remember using a program and having to restart the phone and apply changes or something like that. But, i don't remember the name of the program nor how i am actually suppose to do it. Also if someone can point me in the right direction and tell me what update and what not i am supposed to be on. My captivate is just rooted with a lag fix i believe. Yet, its still really slow and laggy, even overclocked... So im hoping that the new updates will be more efficient; in being fast without taking up all my battery. in my "about phone" it reads:
firmware: 2.1 update 1
kernel version 2.6.29
[email protected]#voodoo_lagfix_3.0_v1.10
Build number: ECLAIR
sorry for being so ignorant. Its just that it has been a while, and i don't want to start off my current rooting experience on the wrong foot.
are you referring to "quickboot" for easy rebooting? you may also want to look into Autokiller memory to help kill the junk. I also used ryan's OCLF.
I like you ran a rooted captivate for the longest time. it worked decently but then I tried to go to Gingerbread. MISTAKE. it was laggy bad and very unstable (Used Cezar's ROM). I didnt like it. Flashed back to the 2.2 rom (supposedly stock) and it was terrible compared to how it was. lots of lag and just overall... YUCK.
so yesterday I got the guts to flash a custom rom. I was mad at the phone so I flipped thru several flavors and ended up putting the Phoenix Ultimate (JS7) on it. HOLY S**t Balls mom!!! it was super fast, extremely responsive and worked like a dream. took me a little while to do it, (I had to flash to 2.1 (you are there), root it, cyanogenmod, then Phoenix) but it is SOOOO worth it. super fast now. my wife is asking me to do hers...ugh...
also, all the animations, graphics and just in general. it feels like I got a brand new phone. I could not be happier
thanks for the reply. Haha sounds like you have an iphone status phone now that's what im shooting for; something fast and reliable. Im going to wait and see what the majority of people like on they're captivates. So i am waiting on standby until i know exactly what and how to do it. And no, the program i believe was only on my computer. i would plug in my phone, drop in the apk file.,remove the phone, and do that recovery mode reboot thing on my phone so that the application i just dropped in installs. Sorry if what im saying doesn't make sense like I've said its been a while -.-
the program you are thinking of is the sideload wonder machine
and yes you are on a very outdated version of android, 2.1 (eclair) there has been an official update to 2.2 (froyo) and also many leaks of 2.3.x(gingerbread) but nothing officially from at&t since froyo.
noone can really tell you what you will like best, you will have to do what the rest of us do and read, read, read, then read a bit more, flash a few to try and pick what you like the best....
thank you! it was SWM.
NOW
what is MIUI, cm7 and pinnacle? custom flashes or something? i am also running my current root with launcher pro. Most of everyone on this thread seem happy with their setup as far as smoothness,responsiveness, and battery life go, which is exactly what i want!
MIUI/CM7 are AOSP versions if 2.3.x,aka gingerbread. Pinnacle is a leaked version of Gingerbread, made for the captivate by Samsung.
so gingerbread is the way to go? or rather should i say 2.3.. how hard is it for me to upgrade to 2.3 i noticed that some apps aren't even available to me in the market on 2.1. but still i want the features that 2.3 has. Besides just updating to a version of gingerbread, what are the other common things people do for anti-lag/responsiveness, while still being conservative on the battery aspect.Thanks for all the help so far guys!!!
I wasn't pleased with the gingerbread as of yet. It will get better I'm sure of it. Try out one of the 2.2 based roms as they are the most stable at this point.
Sent from my Phoenix JS7 run Samsung Captivate
so what do i do? Just get one of the 2.2's that a developer on here made? that way it has pre made fixes and stuff like lagfix already in it correct? how do i go about installing that and from where?
This thread is the best start.
http://forum.xda-developers.com/showthread.php?t=887525
after looking that over, I followed this one:
http://forum.xda-developers.com/showthread.php?t=884364
and had chosen the Phoenix ROM.
thannks but im still comopletly clueless. What exactly is it that i have to do. I know where to find the .zip rom files, but what is a kernel to a ROM? I really dont get it. does the ROM include the build like 2.2 or 2.3 or what not?
just out of curiosity, do you have AT&T captivate or rogers?
what is Rogers?
Yes. I have AT&T samsung captivate
Rogers is a rom version. You are on stock but rooted. The second link has very easy step by step instructions. The rom u get will have all u need including the kernel and modems
1. Back up ur data with titanium backup. If u don't have it, check market.
2. Flash ur phone with Odin
3. One the flash is done to stock do a master clear with Odin (your phone is on, plugged in and USB debugging)
4. Install the root per directions
5. Copy clockwork and the rom. Of ur choice to ur internal zip
6. Install the clockwork recovery (you run it twice back to back)
7. Run the new rom install with clockwork
I. Phone boots to new rom.
First time it takes about an hour. MAKE SURE YOU READ THE DIRCTIONS IN MY PREVIOUS POST.
Sent from my SAMSUNG-SGH-I897 using XDA App
^^Rogers isn't a ROM version. It's a Canadian cell service provider...
thanks for clearing that up. Had no idea what Rogers was lol. Ok so, i guess i just download and install a ROM of my liking? that will also update me to froyo or 2.3 as well? any recommedations as for as ROMS go?
I stand corrected. The rom will upgrade you to what it is based on. The one I use is froyo based. There are gingerbread roms too. Mosaic seems to be a popular one as was Phoenix that I am running. Best advice.. go read those threads. Look at screenshots they have and the user feedback
Sent from my SAMSUNG-SGH-I897 using XDA App
Personally, I'm a huge fan of DesignGears' roms. I'd suggest you go with something like Cognition 5v2. Its 2.3.3, very stable, very fast, and, since you've only used stocks rom up 'til now, it'll be very familiar (minus all the bloatware). He's also got a step by step guide on how to install the rom. http://forum.xda-developers.com/showthread.php?t=1127578
i was trying to get to use that ROM^^ buuut i had to go to rooted 2.3 first. used this thread http://forum.xda-developers.com/showthread.php?t=1127249&page=31
then i hit a problem, i posted on that thread as well still waiting for a response. idk what happened to my phone...this is my post on that thread "ok so i did this and i hit a problem. I got up to the red fish, i turned off the phone to get it into download mode again. and i did, Placed the kernelKF1.tar file in the pda slot and hit start on odin my phone reboots and right after the AT&t logo my screen goes crazy. it looks as if my screen is tripping on acid... and it just keep looping att logo then that. What should i do? i need the files on my phone atleast its not completly bricked"
bump for a reply....
Hi,
so here's my situation: I've previously installed CM7 by tj_style (http://forum.xda-developers.com/showthread.php?t=1167750) on my phone and everything was working fine.
About a week ago, I flashed an overclocked kernel by squadzone (http://forum.xda-developers.com/showthread.php?t=1344440) (I flashed the 782MHz kernel, but after that for a while and getting a lot of shut down, I turned the max frequency to 715, which stabilized the phone) and again, it worked well.
I downloaded an app called Cpu Tuner from the market (https://market.android.com/details?...SwxLDEsImNoLmFtYW5hLmFuZHJvaWQuY3B1dHVuZXIiXQ..) because I wanted to try a new cpu tool (Had Antutu's Cpu Master free edition before). I used the "Check phone's capabilities" option on the Cpu tuner, and all of a sudden the phone just reboots straight into recovery mode. I try rebooting the system, and it gets stuck at the CyanogenMod logo, starts looping it without ever actually booting into the system.
I've already tried wiping data and cache (a lot), going back to stock Gingerbread, which by the way, does the same thing, loops the Samsung logo, re-installing the CyanogenMod and just about everything that comes to mind..
Is there anyone with a similar problem or any idea on how I could fix this?
PS: sorry about all the links, thought it might make it easier if it was clear what I was talking about
Okay, so I managed to get the phone working after all. I was already pretty hopeless, I read a few threads about the Riff Box and was ready to send my phone to the service, but I wanted to take a few last shots at it.
I got it to work by first flashing back to froyo, a package S5570XXJL9 that had separate files instead of a one package, then Gingerbread S5570XXKPI again with separate files, then to clockwork and finally CyanogenMod 7
Hopefully this thread may be of use to anyone facing the same problems as I've faced
Hey everyone,
I used to have a Sidekick 4G that was rooted and ROM'd so Im not neccessarily a noob to this, but still a bit. I bought an LG Optimus T (T-Mobile) as a replacement for my broken Sidekick. I'd had the phone before so I knew it was a decent phone, and for $40 on eBay, a deal I couldn't pass up.
Here's the story: I rooted my phone and got a ROM loaded on New Years Day. ROM was fine, but I decided I wanted to change to a newer version of CyanogenMod this past Saturday(1/5). So after testing out a few ROM's, I came across one that unfortunately didn't flash properly. When I tried to go to use the phone, the main Android OS crashed. I had a black screen with the nav bar displaying no SIM card(which was accurate), the time, battery life, and no signal. Once my boyfriend got home and was able to get the phone to finally boot into CWM and flash into the new ROM, even with my SIM card in, I had no signal. I thought maybe it was an issue with the APN so I went in to try to fix it and none were listed. When trying to add one it, it never saved.
My recovery in CWM goes back to the broken ROM, unfortunately. When trying to unroot, Superuser begins to not respond when its trying to uninstall either busybox or Superuser. The phone works fine, I can connect to WiFi and use it and everything.
My question for you today is does anyone have a recovery of the stock ROM that they can post that I can flash into, or any tips on how to fix this? I thought maybe my SIM card is fried for Android, so I thought of calling into T-Mobile to have them activate a spare I have laying around, but would that fix the issue?
I really appreciate any help that you guys can provide. Thanks in advance!
kaitthedork said:
Hey everyone,
I used to have a Sidekick 4G that was rooted and ROM'd so Im not neccessarily a noob to this, but still a bit. I bought an LG Optimus T (T-Mobile) as a replacement for my broken Sidekick. I'd had the phone before so I knew it was a decent phone, and for $40 on eBay, a deal I couldn't pass up.
Here's the story: I rooted my phone and got a ROM loaded on New Years Day. ROM was fine, but I decided I wanted to change to a newer version of CyanogenMod this past Saturday(1/5). So after testing out a few ROM's, I came across one that unfortunately didn't flash properly. When I tried to go to use the phone, the main Android OS crashed. I had a black screen with the nav bar displaying no SIM card(which was accurate), the time, battery life, and no signal. Once my boyfriend got home and was able to get the phone to finally boot into CWM and flash into the new ROM, even with my SIM card in, I had no signal. I thought maybe it was an issue with the APN so I went in to try to fix it and none were listed. When trying to add one it, it never saved.
My recovery in CWM goes back to the broken ROM, unfortunately. When trying to unroot, Superuser begins to not respond when its trying to uninstall either busybox or Superuser. The phone works fine, I can connect to WiFi and use it and everything.
My question for you today is does anyone have a recovery of the stock ROM that they can post that I can flash into, or any tips on how to fix this? I thought maybe my SIM card is fried for Android, so I thought of calling into T-Mobile to have them activate a spare I have laying around, but would that fix the issue?
I really appreciate any help that you guys can provide. Thanks in advance!
Click to expand...
Click to collapse
u are not getting a signal because u are on the old baseband
flash gingersnap by neko95 it has support for both baseband
and press thanks
androidisfuture said:
u are not getting a signal because u are on the old baseband
flash gingersnap by neko95 it has support for both baseband
and press thanks
Click to expand...
Click to collapse
I just flashed Gingersnap and still have the same issue. No signal, no APN.
kaitthedork said:
I just flashed Gingersnap and still have the same issue. No signal, no APN.
Click to expand...
Click to collapse
please read the gimgersnap page
it has terminal command
open terminal emulator
first type su
then press enter
then type fixbb
Lolz!!
Upgrade to new baseband or flash baseband fix 'after' flashing a rom!!
Download the fix from my signature below. (1st link)
Flash this fix same like flashing a rom from CWM!!
Please bare with me since this is the first time having to post for an issue since I usually find an answer on your forums
So here's the situation.
I bought the photon q 4g lte from ebay and it came with the unlocked bootloader.
Needless to say it was with the stock ics and i tried to find a jellybean update because it wasn't taking the ota and ended up going with cyanogen since i had no problems before. However those phones i had before were with sim cards not cdma.
I found out i couldn't update prl or profile manually without having to do something on the pc.
So after searching left and right i found i could use rsl lite (I used 6.1.5) and eventually found the "stock" file from this post
http://forum.xda-developers.com/showthread.php?t=2095536&highlight=rsd+lite
I did the stock jellybean, got it to go through the process and it booted up with no errors.
However, when it boots into the os it pops up a force close on omadmclient_sprint_dataservice and eventually also on the process com.android.phone.
I tried putting it in airplane mode to see if the service error would go away but it didn't work for the process part crashing.
I tried re-flashing, deleting cache in recovery, doing a data/factory reset in recovery and the one time i was able to do a data factory reset within the settings menu.
I could not find anyone that said they had a rom that worked with sprint and updating prl within the rom, if anyone knows of one let me know and i will flash it through rsd.
Otherwise does anyone have an idea of what could be happening because googling the omadmclient part did not pull up anything specific and pulling up the process issue for other phones has not helped me either.
Was this a hacked GSM phone, or are you using it as CDMA?
I've never heard of people having FC issues after flashing a FXZ from RSD. Which one did you flash? Android 4.1.2 - Sprint US - 9.8.2Q-122_XT897_FFW-5 (No simlock) ?
If you are on stock, you should be able to update the PRL within the ROM.
I was trying to use it with cdma network through sprint. and yeah that was the file i downloaded, had to remove the getvar to get it working but flashed with no errors after doing that.
As for updating the prl i can barely navigate through the phone, there is no home page loading and the process pop comes up often enough that its hard to go through the settings
crispy6 said:
I was trying to use it with cdma network through sprint. and yeah that was the file i downloaded, had to remove the getvar to get it working but flashed with no errors after doing that.
As for updating the prl i can barely navigate through the phone, there is no home page loading and the process pop comes up often enough that its hard to go through the settings
Click to expand...
Click to collapse
Sounds like something went wrong mate. Are you already activated on Sprint? I don't know if that would matter, it might.
I would honestly redownload and redo the RSD process.
arrrghhh said:
Sounds like something went wrong mate. Are you already activated on Sprint? I don't know if that would matter, it might.
I would honestly redownload and redo the RSD process.
Click to expand...
Click to collapse
I originally tried to activate the phone through cyanogen and then when the rep said he couldnt do it because of the lack of prl to update within the rom we just setup the activation back on the old phone/ That phone is working on the network.
I re-downloaded the file just in case and re-flashed but same problem. The only thing i thought of was maybe updating the radio but since its a stock rom it should work out of the gate. whats also weird is i tried turning wifi on but it didnt work either.
Anychange you know of a rom that works with sprint. I dont care if its stock since i would probably root later again.
crispy6 said:
I originally tried to activate the phone through cyanogen and then when the rep said he couldnt do it because of the lack of prl to update within the rom we just setup the activation back on the old phone/ That phone is working on the network.
I re-downloaded the file just in case and re-flashed but same problem. The only thing i thought of was maybe updating the radio but since its a stock rom it should work out of the gate. whats also weird is i tried turning wifi on but it didnt work either.
Anychange you know of a rom that works with sprint. I dont care if its stock since i would probably root later again.
Click to expand...
Click to collapse
Which one are you flashing?
Try another perhaps...? I honestly have never heard of this. It sounds like the phone might be damaged, or the RSD process just did not flash correctly.
I guess I should ask, was the phone modified at all for the GSM SIM slot mod? I wonder if having a non-Sprint SIM in is messing with it... That is just a shot in the dark.
arrrghhh said:
Which one are you flashing?
Try another perhaps...? I honestly have never heard of this. It sounds like the phone might be damaged, or the RSD process just did not flash correctly.
I guess I should ask, was the phone modified at all for the GSM SIM slot mod? I wonder if having a non-Sprint SIM in is messing with it... That is just a shot in the dark.
Click to expand...
Click to collapse
so far the only rom i tried was 10.1 cyanogen and the stock rom for jellybean. However for the stock rom it doesnt let me downgrade to ics with rsd 6.1.5 do you think if i downloaded an old version i could downgrade to a lower stock rom?
Also I honestly had not looked for the cdma roms since most of what i saw was troubleshooting related for this phone but i just saw this rom -AOKP 4.2.2 (Android Open Kang Project) (CDMA&GSM) that you created - http://forum.xda-developers.com/showthread.php?t=2293892
I re-rooted and installed that one and it looks great, just wondered how you got sprint to activate the phone or if you had done it before changing the rom? Also how would the prl and profile be updated.
Lastly the wifi wasn't turning on this time either, it did work initially when i got the phone so that has me stumped.
crispy6 said:
so far the only rom i tried was 10.1 cyanogen and the stock rom for jellybean. However for the stock rom it doesnt let me downgrade to ics with rsd 6.1.5 do you think if i downloaded an old version i could downgrade to a lower stock rom?
Also I honestly had not looked for the cdma roms since most of what i saw was troubleshooting related for this phone but i just saw this rom -AOKP 4.2.2 (Android Open Kang Project) (CDMA&GSM) that you created - http://forum.xda-developers.com/showthread.php?t=2293892
I re-rooted and installed that one and it looks great, just wondered how you got sprint to activate the phone or if you had done it before changing the rom? Also how would the prl and profile be updated.
Lastly the wifi wasn't turning on this time either, it did work initially when i got the phone so that has me stumped.
Click to expand...
Click to collapse
To downgrade to ICS, you need to remove some additional lines. See this post for more information on that.
However, you should be able to update the PRL on either stock ROM.
I think I said this before, but I will say it again. You need to do PRL updates, activate the phone, and get EVERYTHING working on stock BEFORE you flash ANY custom ROM. This is just standard practice - you don't want to put the cart before the horse! Get the phone working, then play with custom ROM's.