Database Info

Motorola CLIQ on Bluescreen Bootloader USB init... of death......

I have a Motorola CLIQ on the blue screen of death that reads BOOTLOADER USB INIT... and that's it.
Is there ANYWAY for me to fix this? re-flash the phone, re-load android OS, something....????

just try every possible thing you just said,

flash shx firmware
you'll have to flash an shx firmware. look at ModMyMoto - Motorola CLIQ/DEXT - CLIQ & DEXT firmwares Superthread (sticky)
flash this fw w/ rsd lite:
Branding: T-Mobile US
Version: 1.3.18
Bootloader Version: 05.15
Requires RSD Lite 4.5.7.

I have almost the same problem, but mine stays on White Motorola logo.
I wiped my cliq using adb shell wipe all command and now I can't re-flash on RSD Lite because it says "Please wait for all-TCI ready, and try again..."
When executing a adb shell command it returns this error: - exec '/system/bin/sh' failed: No such file or directory (2) -
running adb devices returns:
List of devices attached
0391255714 device
Is there any way to access its internal storage and reflash?

I have tried reflashing the phone several times, it says it completes successfully - but always reboots in to this blue screen with bootloader usb init at the bottom.
any other suggestions?

Latest update: (and it's a bad one)
I downloaded tmo-morrison-viper-1.1.31-P3-rootedbythedude.shx file, flashed it using usb drivers 4.20 and rsdlite 4.5.7
It claimed it flashed successfully, but the phone never rebooted... just stayed on the blue screen with the bootloaded usb init on the bottom.
Now, I've tried to re-flash with either that same .shx file and it error's out. Then I thought maybe unrooting it would work so I tried tmo-morrison-viper-1.1.31-P3-supermonster-customer.shx and it error's out.
I originally tried tmo-morrison-viper-1.1.4-20091012-2014-cprintf-appsbl-P3-secure-supermonster-customer.shx, and it worked and flashed BEFORE today and BEFORE tmo-morrison-viper-1.1.31-P3-rootedbythedude.shx
At this point, the only thing that has changed is now whatever I try to flash, fail's immediately. It only power's on when the usb cable is inserted. I goes straight to the bluescreen with bootloader usb init on the bottom in white characters.
I'm pretty much STUMPED at this point.
Here is a screen shot of what RSDLITE shows when this cliq is connected. Anyone got any suggestions?

Maturz i am having the EXACT same problem. RSD is saying TCI ****, phone boots to the white moto logo, adb won't work. i have NO idea where to take this. The only menu i've seen that looked promising was the recovery menu which you reach by holding camera during boot. By holding(no stickykeys) ALT and hitting L you can see its menu. The options are to run an update.zip( I can't find a single file it will accept as signed/not fail executing), wipe, or restart. The wipe does not fix this issue. PLEASE tell me if you fix your device, I've got a mirror with a keyboard and its a serious bummer. This problem occurred while flashing a rom. RSD ****ed up. Some claim they can get the charging firmware to mount something ADB can talk to by plugging the phone into the wall and then switching to the computer quickly..but i haven't been able to get this to work.

i had this very same problem and i fixed it through rsd flashing the latest firmware. i lost root in the process but i don't have a brick anymore

moxiot said:
i had this very same problem and i fixed it through rsd flashing the latest firmware. i lost root in the process but i don't have a brick anymore
Click to expand...
Click to collapse
Which file did you flash to it? I'm stuck now - where it won't seem to accept any flashing now ... PLEASE HELP

OMG I sumwhat did it!
Turn ur phone off, than at the same time press power, star button & pound button that reboots and start as usual HOWEVER when u turn off the phone it goes back to blue screen! I figured this much maybe now I can reinstall android 2.0 hmmm! Email me [email protected] if u figured it out from there hop'e this help' ;0)

Cordellnj said:
Turn ur phone off, than at the same time press power, star button & pound button that reboots and start as usual HOWEVER when u turn off the phone it goes back to blue screen! I figured this much maybe now I can reinstall android 2.0 hmmm! Email me [email protected] if u figured it out from there hop'e this help' ;0)
Click to expand...
Click to collapse
Can you post the solution here?

HELPPPP
Flashed the original firmware with red light and it failed now my phone stays with a black screen but the keys light up :'(

Bummer!
my phone only turns on when i connect it to the charger and it boots to a Black screen with a blue bar at the bottom that reads "Bootloader USB Init" no motorola logo.
has anyone else ran into this? i had the logo before i flashed "tmo-morrison-viper-1.1.31-P3-supermonster-customer.shx"
Someone help me! this was supposed to be a xmas gift for my sister but now it feels like paper weight.

buddie024 said:
my phone only turns on when i connect it to the charger and it boots to a Black screen with a blue bar at the bottom that reads "Bootloader USB Init" no motorola logo.
has anyone else ran into this? i had the logo before i flashed "tmo-morrison-viper-1.1.31-P3-supermonster-customer.shx"
Click to expand...
Click to collapse
what exactly happened? why did you have to flash?

Stuck in Bootloop

Hey guys,
i don't realy know why, but by phone crashed yesterday, and since then i'm stuck in bootloop. I can't even enter the RecoveryMode, i always get an Symbol with a phone and a 'TrafficSign'(Don't know the name of this).
The only thing i can do is enter the fastboot bootloader... i can't even charge the phone anymore...
H E L P!!!!!!!

opiswahn said:
Hey guys,
i don't realy know why, but by phone crashed yesterday, and since then i'm stuck in bootloop. I can't even enter the RecoveryMode, i always get an Symbol with a phone and a 'TrafficSign'(Don't know the name of this).
The only thing i can do is enter the fastboot bootloader... i can't even charge the phone anymore...
H E L P!!!!!!!
Click to expand...
Click to collapse
Hi opiswahn, you can try to flash rsd lite to reformat your back to stock. First download rsd lite and sbf files of your preference (I am using singapore sbf). Then open your phone while holding power button, sound up, media together. You will go into bootloader mode (black screen). Now flash rsd lite from your cpu and your phone should be alright. Hope it helps you.

thx for the reply, but RSDFlash won't let me flash... see picture

Maybe another version of RSD lite and/or try to run it in XP compatibilty mode.
I had the same situation like you in the screenshot when I installed an sbf using Windows 7 on the neighbour's PC.
But I can't remember clearly what was the key to get it working as it was in february.
Since then no more sbf ...
Milestone XT720 - CM6.3.0 RC3

WinXP did the trick, tried before running as admin or in compatiblity-mode, but nothing worked, so i tried a WinXP VMWare, and boom, it works!
*Edit*
Aw, damnit, every time rsd tries to write to the phone the VM crashes...

opiswahn said:
WinXP did the trick, tried before running as admin or in compatiblity-mode, but nothing worked, so i tried a WinXP VMWare, and boom, it works!
*Edit*
Aw, damnit, every time rsd tries to write to the phone the VM crashes...
Click to expand...
Click to collapse
Try this
Go on control panel , click on system , click on andvanced system settings then on advanced tab click settings under performance then the advanced tab and click change under virtual memory, then custom size and choose it the size u want it to be ,but bare in mind not to low and not to high , keep it under 3000MB
Also I found that OR sometimes gets corrupt. Most of the time if you just re-unzip the recovery and replace all the items in the Openrecovery folder (except the Updates b/c you'll lose whatever is in there when you overwrite it) on your PC and then xfr over to SD cardyou then you can enter recovery like normal. That usually does the trick. In fact that happened to my wife's phone last night and I fixed it up just like that.
I always hate flashing sbf when I can just restore a nandroid. Not sure if it will work since you started the sbf already.

I had the same issue with RSD Lite 4.6. I found a 5.0 with no problem. But now I saw yours! How ironic.

enter moto's recovery, do "factory reset"

You need to enter bootloader mode, not the fastboot bootloader.
Sent from my MilestoneXT720 using XDA App

Stuck in boot loop after upgrading to Bravo 2.2 v1.6 by brianlee+updates0926_bravo1.6
Help! My phone is experiencing the same thing... stuck in boot loop. The operator's logo (Singapore Starhub) keep appearing again... again... and again.
I upgraded it the from dexter's rom to Bravo 2.2 v1.6 by brianlee. I've followed all instructions below but after I install the update, my phone stuck in boot loop.
Instructions
Download 1.6 from one of the links above.
Download the Update from above.
Extract the contents of the 1.6 download.
Copy the contents of the sdcard folder to the root of your sd card. (You can skip the OpenRecovery files and just copy the nandroid folder if you already have OR).
Copy the update ZIP file into /sdcard/OpenRecovery/updates
Reboot into OpenRecovery
Nandroid > Restore > bravo2.2-brian
Apply Update > update-bravo1.6Mz-20110926-1328.zip
Wipe Cache, Wipe Dalvik, Factory Reset
My phone run perfectly well and after I apply this update (updates0926_bravo1.6.zip), I'm stuck in boot loop.
I've tried many ways to recover my phone, but none is successfull, including this thread. I've tried the camera button+power button and then volume up button. And this message appears on the screen: "E:Can't open /cache/recovery/command" with phone picture and exclamation mark on the background.
RSDlite 4.9 + sbf file can't detect my phone.
Can someone help me? Can I restore my phone?
---------- Post added at 02:36 PM ---------- Previous post was at 02:00 PM ----------
Sorry, I can recover my phone. I tried to press power button+volume up button+media button all at once and the recovery mode appeared. I applied the proper update and voila... My phone is working again.

[Q] MotoDefy MB525 cant boot!! HELP!!!

Hi Guy,
I need you to help me out here, in the morning today i decided to upgrade my motodefy with cm7 i followed everything mentioned here http://forum.xda-developers.com/showthread.php?t=1054447 , but as i rebooted after installing zips from sdcard my phone went into bootloader everytime. So i used an sbf file and used rsd lite 4.9 to flash. I have tried using so many different sbf but no luck. Now my phone wont power on, not even with vol + - keys. when i plug it to my pc the white led would glow and when i try to flash it using rsd it will show on my phone "sw update in progress" once done rsd will reboot my phone and say that it has passed but nothing happens on the phone.
PLEASE HELP!!

got my phone back using JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF.sbf
thnx
will try to upgrade now, suggestions?

Motorola Razr HD LTE XT925 4.1.2 boot loop

I'm stumped with this issue of my Motorola Razr HD LTE XT925 Rogers version 4.1.2 being in a boot loop. It started when I did a factory reset to try and fix some camera issues that I was having it started up with the Motorola red M icon then went to proceed with the factory reset with the android icon with the spinning blue object then restarts and just does a loop I have tried some steps that I found that I will list but all are unsuccessful and I did try them several times. It is stock firmware but was rooted with one click rooting program can't remember the name I did nothing else to the firmware.
Power + volume down for 10 seconds (simulates a battery pull)
Stock recovery tried wiping data and cache and then rebooting
Tried to use the boot menu normal start up and factory options
I did however get it to boot to the Rogers logo screen once but it just froze and had to restart it
I am currently trying get ADB tool to installed and get it working to see my phone as well as RDS Lite 6.1.6 it wont show any info about the phone but when in fastboot mode RDS Lite see it as connected in fastboot but no info about the phone shows up in the top left box as it has shown before also tried Super ADB Tool it show nothing at all I will continue to try and get the tools working.
Any help in getting the phone to boot normally is greatly appreciated.

I was also wondering if any body knows a good way to completely wipe the razr XT925 and restore the stock firmware that would also help.

OK so I have ADB installed and working I think put my XT925 in fast boot mode then I put in code adb devices in to the windows command console but show nothing listed and my phone says it is in fastboot mode and usb is connected and windows sees it as well but not ADB. There is no errors ether I am so confused as to why ADB and RSD show no info about my phone? I will see if its any of my drivers that are missing.
I went ahead and tried to flash my phone with RSD lite 6.1.6 with no luck the boot loop is preventing it from proceeding with the flash is this just a lost cause and there is no fix for it. The only thing I can think of is that I have to unlock the boot loader is that even an option when I can't even get boot into android? Any one got any ideas?

I was messing a round with my phone and try to get it working with any of the tools and had turned of the phone to stop it from constantly showing the red M icon and the android icon with the blue spinning object over and over but still had the phone plugged in to the computer and was looking in device manger in windows and seen this QHUSB_DLOAD with no drivers for it and looked at the VID & PID ids (USB\VID_05C6&PID_9008
) and searched for drivers thinking that is what is missing for my phone as I have never see it before and it is Qualcomm modem flashing port I don't know what to do did really mess up my phone by just doing a factory restore?
Some help or clarification would help a lot now as it is a bit troubling that I am unable to fix the Motorola Razr XT925 and might be bricked just by doing a factory restore. :silly:

OK I am getting desperate here I will do anything to stop it from looping I have even tried house of motos way just the same thing still if I can stop it from looping I can get it to work but does anyone knows a way to wipe the phone completely or stop it from this infuriating loop???
Just as a side note I found that forcing it in to normal start up with the wall charger plugged in it will charge when done then it will show the rogers logo like its booting but does nothing.

I have searched the forms and google now for 2 days about any way to fix the boot loop but all just say to do things that I have tried many different ways many times and the tools don't work or will work like RDS but it is unable to continue do to the loop of it doing a factory restore then restarts.
If any body has any ideas at all or can at least point me in the right direction would be a life saver I will even jtag the phone if i have to, if even that's possible

Have you booted into fastboot mode?
Have tried to rsd to stock from fastboot?

Darbness said:
Have you booted into fastboot mode?
Have tried to rsd to stock from fastboot?
Click to expand...
Click to collapse
Thanks for the reply, I have gone into fastboot mode and used RSD to try and flash the stock rom but when it restarts the phone its unable to countiue becuse it is uable to get past the bootloop

If your phone is bootloader locked you can always take it back to the carrier, that's it if you have guarantee. I suggest you try a earlier version of RSD lite, 6.1.4 for example, and see how it goes.
Sent from my RAZR HD using xda app-developers app

Hydr0id said:
If your phone is bootloader locked you can always take it back to the carrier, that's it if you have guarantee. I suggest you try a earlier version of RSD lite, 6.1.4 for example, and see how it goes.
Sent from my RAZR HD using xda app-developers app
Click to expand...
Click to collapse
OK, not able to take it to Rogers some issues with doing that but will try RSD lite 6.1.4 besides that no other ways?

I had the same issue yesterday. Received a phone call and my phone shut off and started looping on the red M logo, but no further. I did everything in my power to get RSD Lite and ADB to recognize my phone in fastboot mode. Nothing. Then, I moved the USB port to another port on my laptop, and viola, RSD Lite picked it up, but ADB never did. Using the stock firmware available for my 926, I was able to revert back to the latest version of JB for my phone. I did also have to run RSD Lite in *administrator mode* in order to get success. Hope any of these tips helps you out.
Also, even though I was successful in flashing, I was still in loop mode until... I had to wait for the battery to die and the phone to shut all the way off. Then after powering up, it came up. I tried the volume down + power key, but it would only reset the phone, it would not completely power it off like it needed. This is not something I have seen on any forum anywhere, so hopefully it helps.

xaneth said:
I had the same issue yesterday. Received a phone call and my phone shut off and started looping on the red M logo, but no further. I did everything in my power to get RSD Lite and ADB to recognize my phone in fastboot mode. Nothing. Then, I moved the USB port to another port on my laptop, and viola, RSD Lite picked it up, but ADB never did. Using the stock firmware available for my 926, I was able to revert back to the latest version of JB for my phone. I did also have to run RSD Lite in *administrator mode* in order to get success. Hope any of these tips helps you out.
Also, even though I was successful in flashing, I was still in loop mode until... I had to wait for the battery to die and the phone to shut all the way off. Then after powering up, it came up. I tried the volume down + power key, but it would only reset the phone, it would not completely power it off like it needed. This is not something I have seen on any forum anywhere, so hopefully it helps.
Click to expand...
Click to collapse
Thanks for the reply, I was thinking along the same lines as that but trying it on a freshly installed windows plus on different computer and just have RSD lite 6.0 and my Motorola drivers for my phone installed. I was thinking that it was my current motherboard that has a Intel usb 3.0 controller on it and my old motherboard did not as I manually updated my phone from 4.0.4 to 4.1.2 before on my old motherboard and had no issues and will fallow the instructions to the letter and will triple check as well. I will see how this goes and hope it works as its my last option to get it working.

OK so trying to reflash the phone from a different computer with a fresh install of windows buy did not work.
I was looking though the options in the android system recovery menu and two options stood out are:
apply update from external storage
and
apply update from ADB (wont work as ADB does not see the phone)
would doing an update with an SD card with the firmware on it work or is it for some other purpose?

osalot said:
OK so trying to reflash the phone from a different computer with a fresh install of windows buy did not work.
I was looking though the options in the android system recovery menu and two options stood out are:
apply update from external storage
and
apply update from ADB (wont work as ADB does not see the phone)
would doing an update with an SD card with the firmware on it work or is it for some other purpose?
Click to expand...
Click to collapse
I'm not sure, never flashed that way. If it isn't too much to ask, can you tell me the process you are following to flash the stock rom step by step?, to see if I can somehow help you out, it's really odd It doesn't work.
Sent from my RAZR HD using Tapatalk

Hydr0id said:
I'm not sure, never flashed that way. If it isn't too much to ask, can you tell me the process you are following to flash the stock rom step by step?, to see if I can somehow help you out, it's really odd It doesn't work.
Sent from my RAZR HD using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply, The steps I take to flash my phone is to first put my phone in to fast boot mode then connect my phone to the back of my pc then start up RSD Lite and add the latest firmware for my XT925 in RSD then let it load the firmware and it restarts the phone. it starts up to the non animated red M icon then the android with the spinning blue object in its chest comes up but then shuts off and restarts and have left it for several hours until it died and had to recharge it up.If I can I will post a video of how I flash it and what the phone does.
also is it normal for RSD Lite not to show the imei number of the phone or any thing about it in the top left box (Device properties) when you click on the modal?, all I get is N/A in Device properties box.

Yes, that is completely normal, that only appears when the flash is succesful and you get past the "select language" screen, but seeing that you're stuck in the M logo means that you haven't got there yet, in the mean time it will still appear no imei and no info.
Sent from my RAZR HD using xda app-developers app
---------- Post added at 04:08 PM ---------- Previous post was at 04:01 PM ----------
Here, try this: http://www.android.gs/unroot-droid-razr-hd-xt926-downgrade-stock-firmware/
The RSD process following the exact same instructions found there on a Windows with USB 2.0, and it is preferred you use RSD 6.1.4 (if you don't have it I can post it here if you want)
Your build to flash is found here: http://sbf.droid-developers.org/
Search for the one the phone brought when it was just bought, it has to be from your carrier.
Btw: did the flashing gives you any errors at all or not? Also, do you have bootloader unlocked? Just some details I'm curious, but seeing your phone does finish the process and restarts means it probably doesn't get any errors, anyway I'm just curious.
Sent from my RAZR HD using xda app-developers app

Hydr0id said:
Yes, that is completely normal, that only appears when the flash is succesful and you get past the "select language" screen, but seeing that you're stuck in the M logo means that you haven't got there yet, in the mean time it will still appear no imei and no info.
Sent from my RAZR HD using xda app-developers app
---------- Post added at 04:08 PM ---------- Previous post was at 04:01 PM ----------
Here, try this: http://www.android.gs/unroot-droid-razr-hd-xt926-downgrade-stock-firmware/
The RSD process following the exact same instructions found there on a Windows with USB 2.0, and it is preferred you use RSD 6.1.4 (if you don't have it I can post it here if you want)
Your build to flash is found here: http://sbf.droid-developers.org/
Search for the one the phone brought when it was just bought, it has to be from your carrier.
Btw: did the flashing gives you any errors at all or not? Also, do you have bootloader unlocked? Just some details I'm curious, but seeing your phone does finish the process and restarts means it probably doesn't get any errors, anyway I'm just curious.
Sent from my RAZR HD using xda app-developers app
Click to expand...
Click to collapse
thanks for the reply, I have just tried the the steps in the link you provided and I used RSD lite 6.1.4 and got the 4.0.4 Rogers firmware for my XT925 that it originally came with and waited an hour but just did the same thing, I don't get any errors when flashing although RSD displays to start the phone up manually and I have a locked boot loader (Device is LOCKED: Status Code: 0) I can how ever get it to go to the animated red M icon and then the rogers logo by selecting normal power up from the boot menu but doesn't boot in to android.

osalot said:
I was also wondering if any body knows a good way to completely wipe the razr XT925 and restore the stock firmware that would also help.
Click to expand...
Click to collapse
http://theunlockr.com/2012/01/24/how-to-restore-the-motorola-droid-razr-using-fastboot-files/

Ok, so I think I maybe doing something incorrectly so I will put all the steps I did to reflash my phone and will add some pics and a video if possible.It took me a few days to get another phone to use for vids and pics the phone I used to for video and pics Samsung Captivate, unbrickable ya can't kill it.
1. I have installed RSD Lite 6.1.4
2. Installed the latest Motorola drivers by down loading the Motorola Device Manager
3. Down loaded the firmware for my phone android 4.1.2 full file name ---> 9.8.2Q-8-XT925_VQL-12.2_CANADA_VANQJBLTEFRCI_P004_CFC_fb.xml.zip
4. Put my phone in fast boot mode then connected my phone to my netbook on the side or on the back usb 2.0 port on the PC with the original Motorola usb phone cable tried both to be sure
5. Started up RSD Lite 6.1.4 and load the firmware and selected Decompress only
6. Checked RSD Lite to make sure my phone is connected and showing up and RSD Lite shows (Fastboot VQUISH_U S USB N/A Connected)
7. I then selected start button on RSD Lite and it flashed the firmware with out issues or errors
8. phone restarts fine from fastboot left it for 1:30 RSD displays to reboot the phone manually but the phone does not do anything else but reboot constantly left the phone doing that until it ran out of battery
Pic of XT925 in fastboot mode not connected
Pic of RSD with phone connected in fastboot mode ready to be flashed
Video of phone restarting after being flashed and looping (click the link below)
http://s1295.photobucket.com/user/Osalot-Ruin/media/RSDandphonevideoCapture_zpsff85211b.mp4.html
Pic of RSD after leaving the phone for 1 hour and 30 minutes

In the steps I don't see the XML file editing, did you deleted the getvar line in the XML file?
Sent from my RAZR HD using XDA Free mobile app

xt925 bricked - flashing stops at system step

Few weeks ago my phone started closing apps every now and then, sometimes even restarting itself when under "heavy" load like opening Snapchat filters with face recognition for example (maybe the processor is failing?).
The reboot sometimes took 5 minutes, sometimes more. One time it took the phone 1 hour to reboot.
A few days ago it rebooted itself and got stuck on the M logo for hours, I waited literally until battery drained.
Anyways, I tried to flash Android back on it on fastboot mode with RSD but it always stops at the system img step.
It says "PHONE returned FAIL" on RSD.
My Bootloader is Unlocked btw. Battery says OK. Status Code says 3. Fastboot reason says Sticky bit fastboot after the RSD restarts the phone.
I have tried with 3 different files and all stop at flashing system step. I had flashed 4.4 on it before. My phone is originally from Telcel (Mexico)

mauber said:
Few weeks ago my phone started closing apps every now and then, sometimes even restarting itself when under "heavy" load like opening Snapchat filters with face recognition for example (maybe the processor is failing?).
The reboot sometimes took 5 minutes, sometimes more. One time it took the phone 1 hour to reboot.
A few days ago it rebooted itself and got stuck on the M logo for hours, I waited literally until battery drained.
Anyways, I tried to flash Android back on it on fastboot mode with RSD but it always stops at the system img step.
It says "PHONE returned FAIL" on RSD.
My Bootloader is Unlocked btw. Battery says OK. Status Code says 3. Fastboot reason says Sticky bit fastboot after the RSD restarts the phone.
I have tried with 3 different files and all stop at flashing system step. I had flashed 4.4 on it before. My phone is originally from Telcel (Mexico)
Click to expand...
Click to collapse
Did you ever solve this issue?? I've got pretty much the same issue here, except mine is bricked... Won't even turn on, but if I connect to my pc the led turns green and after a few minutes it turns on, straight to fastboot. Same fastboot reason and everything. When I try to flash with rsd, it stays at step 2, trying to flash the sbl1 file... Then it fails and says PHONE returned FAIL... Any info from anyone is greatly appreciated!!

Luisit0 said:
Did you ever solve this issue?? I've got pretty much the same issue here, except mine is bricked... Won't even turn on, but if I connect to my pc the led turns green and after a few minutes it turns on, straight to fastboot. Same fastboot reason and everything. When I try to flash with rsd, it stays at step 2, trying to flash the sbl1 file... Then it fails and says PHONE returned FAIL... Any info from anyone is greatly appreciated!!
Click to expand...
Click to collapse
Nope Gave up and getting a Moto G 3rd gen

mauber said:
Nope Gave up and getting a Moto G 3rd gen
Click to expand...
Click to collapse
Ahh darn... Well, hopefully someone else sees this thread and is able to help out... Thanks anyways!

Hello, Luisit0 if your battery went bad then it could do that. Did you try hitting the power button when device is plugged into the home charger of the wall outlet? If you get to the M logo when you do that then its just the battery. If It does not do that and nothing happens you need a fastboot cable so you can flash the stock firmware. the fastboot cable will allow you to go to fatsboot mode without a battery.

OGdroidster said:
Hello, Luisit0 if your battery went bad then it could do that. Did you try hitting the power button when device is plugged into the home charger of the wall outlet? If you get to the M logo when you do that then its just the battery. If It does not do that and nothing happens you need a fastboot cable so you can flash the stock firmware. the fastboot cable will allow you to go to fatsboot mode without a battery.
Click to expand...
Click to collapse
HI, thanks for the reply. The thing is, the phone won't even get to the M logo. It charges and everything, but it powers up and goes straight to fastboot... It even said battery low, and after a while plugged in, it said battery ok, so I guess it's charging right. But like I said, no matter what combination I use, even the volume up + power button, it only goes straight to fastboot... I've tried numerous times to flash the Brazil and PR latam firmwares, and even after deleting the getvar and the md5 lines, it still gives me an error on step 2 when attempting to flash the sbl1 file and says FAIL on rsd lite 6.1.4...

Luisit0 said:
HI, thanks for the reply. The thing is, the phone won't even get to the M logo. It charges and everything, but it powers up and goes straight to fastboot... It even said battery low, and after a while plugged in, it said battery ok, so I guess it's charging right. But like I said, no matter what combination I use, even the volume up + power button, it only goes straight to fastboot... I've tried numerous times to flash the Brazil and PR latam firmwares, and even after deleting the getvar and the md5 lines, it still gives me an error on step 2 when attempting to flash the sbl1 file and says FAIL on rsd lite 6.1.4...
Click to expand...
Click to collapse
I am going to give you a two download links one to download proper drivers and another link for another version of rsd to try and flash your device back to life but first i need to know if your running 64bit system or 32bit system.

OGdroidster said:
I am going to give you a two download links one to download proper drivers and another link for another version of rsd to try and flash your device back to life but first i need to know if your running 64bit system or 32bit system.
Click to expand...
Click to collapse
That would be perfect!! I'm running 64bit windows 8

Luisit0 said:
That would be perfect!! I'm running 64bit windows 8
Click to expand...
Click to collapse
first install the drivers download link Here http://forum.xda-developers.com/attachment.php?attachmentid=3187938&d=1425146663 then install them on your windows 8 then install this rsd version after you uninstall the one you currently have and here is the link http://forum.xda-developers.com/attachment.php?attachmentid=3388466&d=1435873884 if this does not work hit me up after monday im in the middle of finals and working on a big programming project due monday after that I can help you figure this out if this does not work.

OGdroidster said:
first install the drivers download link Here http://forum.xda-developers.com/attachment.php?attachmentid=3187938&d=1425146663 then install them on your windows 8 then install this rsd version after you uninstall the one you currently have and here is the link http://forum.xda-developers.com/attachment.php?attachmentid=3388466&d=1435873884 if this does not work hit me up after monday im in the middle of finals and working on a big programming project due monday after that I can help you figure this out if this does not work.
Click to expand...
Click to collapse
Great!! Thanks so much!! I'll try this as soon as I get home in a few minutes, and hit you up after. Thanks again!!
EDIT: Okay so just a little update... I installed the drivers and it seems those were exactly the ones I had already installed, then I installed rsd lite 6.2.4 which you provided... Who wouldve known it was all in the version lol I was using 6.1.5 and, apparently, all I needed was to update... 6.2.4 did the trick!! However, not exactly... The firmware did finally flash completely and successfully, however it still boots directly to fastboot. The difference is, I can now actually access the boot menu holding volume down + volume up + power buttons, though every option I select only makes the bootloader unlocked warning come up and freeze there until I manually turn the phone off holding down the power button. If I select Normal Powerup, after a few seconds the warning goes away, but it never boots up. The other difference is, that now on fastboot, the reason now says "Sticky bit factory_fastboot". I'm going to attempt and flash the same firmware again, or my claropr latam firmware, or pretty much any other latam firmware and see if one of them works. Thanks again so much for your help so far!!!!
EDIT 2: IT LIVES!!!!!! Lol using rsd lite v6.2.4 did the trick. Apparently all I needed was to use the latest version of rsd lite... Man, I honestly cant thank you enough, you saved me a few 3 digit bucks on a new phone!! Lol, thanks so much for all your help!!

Luisit0 said:
Great!! Thanks so much!! I'll try this as soon as I get home in a few minutes, and hit you up after. Thanks again!!
EDIT: Okay so just a little update... I installed the drivers and it seems those were exactly the ones I had already installed, then I installed rsd lite 6.2.4 which you provided... Who wouldve known it was all in the version lol I was using 6.1.5 and, apparently, all I needed was to update... 6.2.4 did the trick!! However, not exactly... The firmware did finally flash completely and successfully, however it still boots directly to fastboot. The difference is, I can now actually access the boot menu holding volume down + volume up + power buttons, though every option I select only makes the bootloader unlocked warning come up and freeze there until I manually turn the phone off holding down the power button. If I select Normal Powerup, after a few seconds the warning goes away, but it never boots up. The other difference is, that now on fastboot, the reason now says "Sticky bit factory_fastboot". I'm going to attempt and flash the same firmware again, or my claropr latam firmware, or pretty much any other latam firmware and see if one of them works. Thanks again so much for your help so far!!!!
EDIT 2: IT LIVES!!!!!! Lol using rsd lite v6.2.4 did the trick. Apparently all I needed was to use the latest version of rsd lite... Man, I honestly cant thank you enough, you saved me a few 3 digit bucks on a new phone!! Lol, thanks so much for all your help!!
Click to expand...
Click to collapse
So you were able to boot into your ROM.

OGdroidster said:
So you were able to boot into your ROM.
Click to expand...
Click to collapse
Yeah, finally it's back to life and working again. Turns out all I needed was to use the 6.2.4 version. Thanks for the link! I would've never thought it was just that :highfive:

Luisit0 said:
Yeah, finally it's back to life and working again. Turns out all I needed was to use the 6.2.4 version. Thanks for the link! I would've never thought it was just that :highfive:
Click to expand...
Click to collapse
Your welcome, happy that it booted. Awsome! You ever need something or some help just hit me up.

xt 925 bricked?
Hi together...
need help...I wanted to reactivate my RAZR HD.....I flashed the Stock without any problem -> then ota dowload....and then only Fastboot mode...
gratis bilder