Is there anyway to turn on usb debugging on a bricked lg optimus t ???
Found that on one forum
-> My Optimus T did the same thing when I was trying to do the official update from LG. This is what worked for me. Disconnect usb cable from phone. Pull battery. Restart computer. after computer reboots, leave battery out of phone and plug usb cable back in. Let windows install drivers. After drivers are installed, go into device manager and disable android modem. will not update if modem is enabled. It will say you have to reboot pc for changes to take effect, click no. log off pc and log back in, do not reboot. after you log back in you can get the software updater from LG and it will reflash your phone. Worked for me anyways. I thought my phone was bricked, but this saved me.
or see that youtube video
http://www.youtube.com/watch?v=CKiKzNbgi9A
Related
I was in process of updating software on my LG GX2, phone got stuck on updating software. I turned it off, disconnected usb and then turned on and connected usb again but phone remained stuck on SW Update. Does anyone have any suggestions or is it bricked. Phone was rooted.
Thanks!
did u use the lg updater if u did there is a guide on using the kdz updater i recommend that as it has fixed this issue for many people
el_lobito said:
I was in process of updating software on my LG GX2, phone got stuck on updating software. I turned it off, disconnected usb and then turned on and connected usb again but phone remained stuck on SW Update. Does anyone have any suggestions or is it bricked. Phone was rooted.
Thanks!
Click to expand...
Click to collapse
Make sure you had stock recovery on the phone. Other recoveries may make the udpate fail. Try another USB port and reinstall the drivers. The LG and/or the LG Updater program are very picky about USB ports. During the update the LG Update tool resets the USB port after each part of the phone is flashed (i.e., baseband, recovery/boot and system. On mine when it told me to remove the battery I refused and simply removed the USB cable, plugged it back and restarted the update and it worked. This is just the program not seeing the phone reconnecting to the computer and timing out. I heard the phone connect before I got the stupid remove battery message, so I decided to try a simply cable pull and reinsertion first and that did the trick for me (was at 5% in SW update screen on phone). It reset again at 56% and 76% (dropped to 75% after reconnect) but this time the phone reconnected and the software saw it in time to continue the update normally. Good luck.
Hello fellow G2x users. Sorry if this question has been asked before. I have used the search function but still haven't found a solution. I just received my refurbished G2x from T-mobile insurance today since my HD2 no longer charges. I'm ready to root and flash a rom on the phone but when I connect the USB cable that came with the phone, it would not detect it and the USB debugging mode does not pop up. I went to Setting - Applications - Development, and made sure the USB debugging is checked but nothing. Also downloaded the USB cable driver from the LG website, still nothing. So any help would be appreciated because I want to get this phone running on CM7 and try these kernels! Thank you.
Hd2Menace said:
Hello fellow G2x users. Sorry if this question has been asked before. I have used the search function but still haven't found a solution. I just received my refurbished G2x from T-mobile insurance today since my HD2 no longer charges. I'm ready to root and flash a rom on the phone but when I connect the USB cable that came with the phone, it would not detect it and the USB debugging mode does not pop up. I went to Setting - Applications - Development, and made sure the USB debugging is checked but nothing. Also downloaded the USB cable driver from the LG website, still nothing. So any help would be appreciated because I want to get this phone running on CM7 and try these kernels! Thank you.
Click to expand...
Click to collapse
Why ask this question in two threads? Could be a bad usb cord or uninstall all lg drivers and reinstall them again. Make sure your phone is not plugged into the computer while you install the drivers for the first time also. Then restart your pc and then plug your g2x, should be fine then.
I realized I posted in the wrong section that's why. Thanks, will try that right now.
Hi guys
i think i bricked my su870
as of now, if i connect it to a charger or press the power on button, it will only bootloop
LG logo appears then it restarted back
i tried to revive it by using the wkpark boot, but apparently my windows 8.1 cant even detect my phone as omap (i've removed the battery.also tried to plug the usb cable directly and even tried connect it while holding Vol + )
it just said Unknown USB Device (Device Failed Enumeration) in device manager and windows keep on connect/disconnecting it.tried to right click on it and update the driver.pointed it to the OMAP folder,but it just straight away said latest driver has been installed
try another cable and windows doesnt even detect the phone at all
any idea how do i revive this phone ?
thanks
hi guys, (LG-P920 is my Phone)
yesterday i installed ROM MANAGER to install CWRMOD (or something like that).
Then i choose my Phone Type and flashed it. After that my phone permanent restarts in 1 second,
showing LG Logo and restart, restart restart nonstop.
I understand that i ****ed it up with flashing that recovery mod. So i decided to Plug into my PC
and install everything new, but when i connect my phone to PC , it detects a unknown device every second and does it permanently too. I tried the "Battery out, Volume Button UP and connect" trick, then it stops acting weird but my PC
dont recognise my phone as OMAP, it is just an unknown device
What should i do guys? i tried installing LG Support Tool, LG Mobile Driver, and i read all the Instruction to UNBRICK your phone.
But all the Instruction starts with a successful regocnition of OMAP driver, but my PC dont even recognise it as OMAP.
PLS HELP
ok i fixed it, it was a really complicated move to 0.1 sec click that omap and install while my Phone was permanent restarting.
Picked up a used LG Volt from eBay for cheap, seller said device is user-locked. First thing I noticed is this is a Boost phone and there is a Sprint sim installed. Thought someone might have been monkeying with the internals. The phone is pattern-locked. I have tried every conceivable combination of button presses/holds and the device will NOT enter recovery mode. All I get is the LG logo coming on and the notification light glowing, then the logo and light disappears, then the logo comes on for a couple seconds then back off again and keeps repeating this cycle.
I connected it to my PC but, since I can't unlock the screen I can't set the phone as a removeable drive and it does not connect to the PC. I have installed the LG Drivers and tried to put the phone in DL mode, however, it is still not recognized by the PC. If I open up device manager on my PC and then plug the phone in the device manager rolls up and back down again like it is trying to figure something out, but the device still does not show up . I have installed/uninstalled the drivers and rebooted my PC several times in hopes that it would connect. I have tried a couple of Android managers on the PC but they don't recognize the Volt either. I have booted the PC into Linux and tried to work with it there but, again, it is never recognized. I have read several post concerning flashing in DL mode, even installed LG Flash Tool, but since the Volt isn't recognized the procedure comes to a halt. I read about ADB but I can't unlock the phone to set debugging and, I believe, the phone needs to be recognized by the PC.
If I could just get past the pattern-lock or get the PC to connect to the phone I feel I might have a chance fixing it.
Hi,
Thanks for using XDA assist.
There is a dedicated thread for you to post this question:
New LG Volt LS-740
Over there, you can receive specialized help from experts.
Good Luck! - gsstudios